Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 176/227 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• Internet Connection Sharing/FTP issues

  - by SirSkidmore

  I am currently using a Linux Mint desktop along with a Windows 8 netbook running Internet Connection Sharing to my desktop. On my desktop, I can't access FTP sites, but my laptop can, so I think it might be a porting issue. I can ping the server from Mint, so I know it's up and running, but I can't access it via telnet. On my Windows 8 netbook, I have every protocol checked, including FTP. Originally, the FTP server indicated that "Scotty" (my netbook) was hosting the service, so I tried inputting the IP of my router, 192.168.1.1 to no avail. Any ideas?

  Read the article

• cisco 6500 crash enabling netflow

  - by bleomycin

  Hello everyone, i have a cisco 6503 running IOS 12.2(33)sxi5 and i'm trying to enable netflow. Following the instructions here http://www.manageengine.com/products/netflow/help/cisco-netflow/cisco-ios-netflow.html enabling for interface vlan 3, shortly after ip flow-export version 5 console outputs: CPU_MONITOR-6-NOT_HEARD: CPU monitor messages have not been heard for 30 seconds crashlog here: http://pastebin.com/Niv2H8xD it then writes a crash log and reloads the router. Has anyone else experienced anything like this before? Here is my running config prior to adding the options in the above link: http://pastebin.com/AgNb1ahG Thank you for any help!

  Read the article

• How can I express this nginx config as apache2 rewrite rules?

  - by codecowboy

  if (!-e $request_filename){ rewrite /iOS/(.*jpg)$ /$1 last; rewrite /iOS/(.*jpeg)$ /$1 last; rewrite /iOS/(.*png)$ /$1 last; rewrite /iOS/(.*css)$ /$1 last; rewrite /iOS/(.*js)$ /$1 last; rewrite /Android/(.*jpg)$ /$1 last; rewrite /Android/(.*jpeg)$ /$1 last; rewrite /Android/(.*png)$ /$1 last; rewrite /Android/(.*css)$ /$1 last; rewrite /Android/(.*js)$ /$1 last; rewrite ^/(.*)$ /?route=$1 last; } There are some vanity URLs e.g. mysite.com/yourdetails which are handled internally by a router class (its a PHP app with index.php as the entry point) and they seem to work fine on nginx but not Apache :-/ I tried this but the vanity URLs are not working RewriteEngine On RewriteBase / RewriteCond %{REQUEST_URI} !=/favicon.ico RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?route=$1 [L] I'd like to rule out Apache config first before I get too deep into the code.

  Read the article

• HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

  - by joelarson

  I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

  Read the article

• allow SSH to bypass VPN on OSX mavericks, openvpn, pf

  - by zycho42

  My home computer connects to the internet through an OpenVPN connection. However, I would like to be able to connect to my home computer from outside over ssh. Ssh is set up and working, but when I connect to the vpn ssh is only accessible from inside my home network. I figure what's going wrong is my router forwards incoming ssh connections to my mac, but then my mac replies over the vpn, so the connection from outside times out. I've got pf set up for a couple of other things, but I can't figure out how to let the ssh replies bypass the vpn using pf. I've come across other solutions that use ip tables, routing tables and rules, but I can't figure out how to set that up on mavericks. I've been searching for this for a while now but I haven't found a working solution. Any help would be greatly appreciated!

  Read the article

• Two network cards in one Windows 7 PC

  - by Martin

  Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

  Read the article

• proxy/vpn by dns entry

  - by rcourtna

  I've been using a service by unblock-us.com, which provides a proxy to Canadians/others allowing access to services that are locked down to only US ip addresses. This is easy enough to achieve by setting up a reverse proxy (eg: squid) on a US-hosted server, and then configuring your browser or OS to use that proxy. However, there is something that unblock-us does that I'm not sure how to duplicate. Rather than configuring your OS to use them as a proxy, you can simply change the DNS Server settings on your router to point to their addresses. Any requests to services they support are automatically proxied. The advantage to this is that you don't have to set up every computer in your house, and it "just works" with clients like ps3, xbox, android, etc. Disadvantage is you really don't have control over what gets proxied, as well as there are privacy concerns I suppose. How can I achieve this same functionality on my own us-based slice?

  Read the article

• Web browser being selective about the sites that it will visit.

  - by Andrew Doran

  I've been trying to help my father-in-law with this problem but haven't been able to get anywhere. Since the weekend the web browsers on his computer (Chrome and Internet Explorer on Windows XP) will only let him get to certain sites - for example, he is able to conduct his online banking but he cannot visit www.bbc.co.uk, www.amazon.co.uk or www.ancestry.com. There is another computer in the house that goes via the same router and this can connect to both, which suggests it is his machine. I tried running a tracert to www.bbc.co.uk and managed to get through, but the web browser hangs with a message that it is waiting for a response. I tried using the WinSockFix tool in case it was anything to do with a recent registry change but that didn't work either. He can't think of anything that he recently did on his machine to cause the problem. Can anyone help?

  Read the article

• Downloads on Vista Home Premium start off fast but slow down to 0 Kb/s and hang

  - by user66265

  I have Windows Vista Home Premium on my computer and everytime I go to download something, it starts out at about 1.5 Mb/s and stays there for about 3 seconds, then it slows down to 800 Kb/s and continues to drop until it gets down to 0 Kb/s and hangs. I've tried just about everything I can find such as uninstalling all firewalls/antivirus, doing the netsh rss,autotune, and chimney disable, and updating everything but it still continues to happen. I'd prefer not to reinstall but if I have to then I have to... EDIT: Figured it out, the router needed a firmware update

  Read the article

• Why subnet mask for IP 10.0.1.4 is 255.255.255.0?

  - by Rohit Kandhal

  Well I'm not sure whether I'm missing something here. But all I've read is that if first octet of IP is within 0 - 127 then it is categorized as Class A subnet and correspondingly Subnet Mask for this is 255.0.0.0 but when I connect my system to Apple airport then my system gets IP as 10.0.1.4 however subnet mask is 255.255.255.0 not 255.0.0.0. Please explain what I'm missing here. If there is something like for apple router subnet mask is calculated on some different flags then please let me know.

  Read the article

• Acer Aspire 7739G-6647 won't connect to the internet

  - by Nux

  Acer Aspire 7739G-6647, it belongs to a family member. I reinstalled the chipset, LAN drivers, ethernet controllers, etc. I'm positive it's not my router or modem or anything like that. I have other laptops running on the network, this one just has some strange issue. For some reason, it's saying "Work Offline" is enabled when I open Windows Media Player, and the PC seems to be connected to the network, but on the graphic in networking, it doesn't show the connection between the network and the internet. Could anyone try to state any possible reason for this issue? Any help is appreciated.

  Read the article

• Windows 7 Connection Sharing unable to access some sites

  - by Kristopher Ives

  I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

  Read the article

• How to prevent Ubuntu from combining networks on 2 NIC server?

  - by SolarPower

  I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• Turnkeylinux lampp guest doesn't have internet connection

  - by dave08

  I've set up a turnkeylinux lampp server in virtualbox with two network bridged connections, one for when I'm plugged in to my router, and one for when I'm using a wireless connection. This allowed me to pull up the turnkey control panel on the host machine's browser, but when I try going into the command prompt in the guest and run an apt-get update, it doesn't seem to have an internet connection, even though it seems to have a connection with the host. What could be wrong? Thank you very much in advance for any answers...!

  Read the article

• Freenas 8 email setup

  - by atrueresistance

  I'm struggling with setting up email reporting in Freenas. My build is FreeNAS-8.0.4-RELEASE-x64 (10351). I have my IPv4 Default gateway set to 192.168.2.1 (my router) and Nameserver 1 as 8.8.8.8 (google's public). Under my email tab I have from email ***@gmail.com outgoing mail server smtp.google.com port to connect to 465 tls/ssl SSL use smtp auth checked username ***@gmail.com password **** I then went into accounts and changed the root email to ***@gmail.com. When I try and send a test email, I get Your test email could not be sent: timed out So what am I doing wrong?

  Read the article

• How to set up server/domain name correctly in hosts file with HTTPS

  - by Byakugan

  I am trying to do local network and I am using these kind of types of network. 1) Main server which connects to internet with static IP 2) Second computer connected to first one locally with address like 192.168.0.2 - when I write this address to address line it is like i wrote localhost in original main server - so it should show my local web browser etc ... It has domain name this IP and connected router for it ... example www.domain.com so I added to my main server hosts file (linux powered) lines like these: 192.168.0.2 domain.com www.domain.com It was working ok when I entered my domain name in local computer it showed my site ... But after some time I added HTTPS cerfiticate and added this line to my apatche server: Redirect permanent / https://www.domain.com/ And now it does not work even when i add something like this to my hosts file: 192.168.0.2 https://www.domain.com So any idea how do do this thing work? Thank you.

  Read the article

• Development Server Blocked Only from Home

  - by theonlylos

  Recently I've been having an issue with my CentOS 6 test server running Apache and Webmin running on port 10000 where when I try accessing any part of the server - SSH/FTP and even my domains (I have two - both keep getting timeout errors) when I try accessing from any computer on my home network. However when I access via tethering or via my office networks everything loads fine. While the firewall is the first issue at mind, my router never was set to block any special ports, and even after adding port 10000 as a specific exception I'm having no luck. Also, I doubt this is an IP blacklisting issue because I have websites on other servers using CloudFlare for security and I haven't gotten any warnings. Any assistance is greatly apprecaiated. UPDATE: Just some extra details about the issue: My ISP to my knowledge only blocks off ports 25 and 80 for residential users to prevent them from running web servers - however this issue has only come up a day or two ago, before that I was using the server successfully for months. Also the server is not physically located in any of my workspaces - it's a VPS housed in a datacenter

  Read the article

• my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

  - by Yosef

  Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

  Read the article

• How can I speed up my Windows Server 2008 VPN Connection?

  - by Pure.Krome

  So I've installed VPN service that comes with Windows Server 2008. Works perfectly, etc. When a client remote desktops to one of the private servers at the office, via VPN .. it's pretty slow. Now - how long is a piece of string? So before I get all the obligatory checks, I'll list the things from Mr. Obvious: Our modem/router (fritz!box) has a data/graph that shows incoming and outbound bandwidth. Both directions are barely getting used when a client has RDP'd via VPN. Our office internet connection is running at 21,9 Mbit/s download 1,3 Mbit/s upload. I feel like it's maxing at .. modem speeds ?? Is there any tricks I can do to confirm this and possibly even fix this?

  Read the article

• Linux clients and Windows Servers can connect but not windows clients

  - by Mustafa Ismail Mustafa

  This is driving me insane because I can't make head or tails of it. We have two DCs (W2K3 SP1) and I'v tried this once on each machine as a sanity check. DHCP is being served by either one of the machines and all machines get an address no problem. The servers can connect/ping/browse to the www and so can all our linux clients. But NONE of our windows clients (all windows 7). I can do anything within the network, I can even ping the firewall/router but nothing from the windows clients is leaving the confines of our subnet. I don't get it. The linux and windows clients are both served from the same DHCP server, the gateway is the same, everything is the same. Anyone care to take a shot at how to resolve this? I tried adding explicit routes at the clients, but still no go. TIA SMIM

  Read the article

• Windows Vista to Windows 7 Gbit LAN slow file copy

  - by ashgromnies

  I have two computers with gigabit LAN, one running Windows 7 and the other running Vista. I have a D-Link DIR-655 router, with gigabit LAN ports. I created a shared directory on the Vista computer, mapped it as a network drive on the Win 7 computer, and tried copying a 2 GB file... and it's going at 900 KB/s Yep... 900 kilobytes per second, about 7 Mb/s. Why so slow? Any ideas?

  Read the article

• DNS resolution over DHCP

  - by Eric

  I have a m0n0wall router a VMWare workstation running ubuntu a windows 7 workstation running the VM The ubuntu hostname is "renraku" From the windows machine I can't resolve dns automatically for this host. For example, when I ping renraku Ping request could not find host renraku. Please check the name and try again. However nslookup seems to work nslookup renraku Server: m0n0wall.local Address: 192.168.123.254 Name: renraku Address: 192.168.123.248 I don't get how to have ping to work with hostnames. The main goal behind this is to have my web server to work with hostnames instead of ip addresses EDIT : ping 192.168.123.248 works

  Read the article

• MikroTik ipv6 Tunnel

  - by MikeSmitty

  I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that I can ping any ipv6 address fine, but give it a little time (say, maybe 30 sec) and I can't ping any ipv6 addresses again. Whenever it stops allowing ping to go through I notice the counter on my firewall rule that drops invalid connections goes up. this is my ipv6 firewall config: add action=accept chain=input comment="" connection-state=established \ disabled=no in-interface=sit1 add action=accept chain=input comment="" connection-state=related disabled=no \ in-interface=sit1 add action=accept chain=input comment="" disabled=no in-interface=bridge \ src-address=ipv6_address_here/64 add action=drop chain=input comment="" connection-state=invalid disabled=no \ in-interface=sit1 add action=drop chain=input comment="" disabled=no in-interface=sit1 Any ideas on what it could be?

  Read the article

• Windows 7 can't connect to via ethernet to Airpot Extreme

  - by Mr AJL

  I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >