Search Results

Search found 21006 results on 841 pages for 'virtual desktop'.

Page 182/841 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Custom PCI bracket with support, for custom PCB?

  - by newbiez

  I am considering to put a custom PCB card that I made, into my computer. It won't go on any PCI connector, it plugs in on a USB connector on the motherboard, via a ribbon cable. I need thou to plug a device to it; which means that either I leave the PCB outside the case, hanging by the ribbon (bad idea), or I could put it in a PCI slot, using a bracket. The issue is that the brackets that I have, do not have tabs, so I have no way to screw the PCB on them. I was hoping to find something that would allow me to put the PCB on it, and then just fit it in the PCI bracket opening, like this: http://www.idotpc.com/TheStore/pc/viewPrd.asp?idproduct=1203&idcategory=0 This one won't fit the bill since the holes are too close apart, compared to the one that I have already on the PCB (and can't make more holes). Do you know if there is a place where they make universal PCI bracket mounting systems for custom PCB? I just need one, so can't even order a custom one (they ask me 120 dollars for one). Thanks in advance!

  Read the article

• Identify an instance of Google Chrome by PID

  - by Laramie

  While working I generally need around 40 windows open at a time and run 100-200 processes. When memory constraints become an issue, I start picking off the processes that are the most resource intensive and disposable. Often these are chrome.exe. It would be helpful to be able to match a particularly memory-hungry instance of chrome to it's PID so I can selectively close it. That is, if I knew what the page title it is currently open to, I could choose whether it lives or dies. I've tried Process Explorer to no avail. Any ideas?

  Read the article

• How to tell Linux to explicitly swap out main memory of a suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

• Vmware Fusion 5 Port Forwarding

  - by Snap Shot

  I have a service (a node.js express app) running on port 3000 in a CentOS 6.3 guest that I would like to access in a web browser on my Mac Mountain Lion host using VMware Fusion 5 Professional. I am having trouble finding any information about how to do this. I believe I would like to forward the port but I cannot find any information about this using either the GUI or by modifying configuration files. In earlier versions it looks like you might have modified a file called nat.conf but that does not seem to apply to Fusion 5. Has anyone successfully done this? Thank you.

  Read the article

• custom windows 7 themes

  - by Ieyasu Sawada

  I found one at deviantart.com: http://browse.deviantart.com/?qh=&section=&q=adagio+theme#/d2zwu22 I like the adagio theme, except that you cannot see the content of the address bar unless you click your mouse on it. Is there any site that you know wherein I could download custom themes for windows 7. Themes that would actually modify the looks of it. Not just the colors,icons and wallpaper. Can you recommend a theme for me. A theme that would modify the navigation, close, min, max buttons in the windows explorer

  Read the article

• VM using a secondary graphic card

  - by Arthur

  Hi everyone, at the moment i have a dual monitor setup on my main PCIe gfx card. I know that on windows it is almost impossible to have a second card (eg no thrills PCI card) running without having an SLI motherboard because of a driver issue. Well this was my conclusion after many weeks of research. I was thinking...is it possible to use a VM in order to utilize the secondary card as the default video output to feed another monitor? let me know if you want me to clarify Thanks :)

  Read the article

• Temporary user-profiles on Windows Server 2008 TS

  - by sinni800

  Hello, for a publicly accessible terminal server I have created a user profile which only allows running of a few programs (demonstration of applications). This results in many people connecting to the same user name on the server, essentially sharing the same profile. How can I copy the original, empty profile on every logon to a seperate directory and delete it afterwards, so everybody starts with a clean copy of the "Guest"-Account?

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• How much resources are used during a RDP connection?

  - by KronoS

  Having recently installed a RDP app on my mobile device and got me wondering: this small device which has a limited amount of resources compared to the PC I'm connecting to, is still able to operate my remote machine to almost full capacity. With that, how much of the local machines resources are actually used in the connection to the remote machine? Also how much of the resources are used on the remote machine?

  Read the article

• How can I make VNC faster?

  - by NickAldwin

  I need to remotely access and use my work computer a few times a week. I want to use VNC because of the price. I've used VNC before, mostly on my own network, where it's fast. However, VNC over the internet is incredibly slow. Even at 256 colors and lower, with Aero turned off, it is unbearably slow. I recently used Ammyy Admin to connect to do something requiring a quick reaction time. Ammyy was really fast, with almost no lag, and it was running in full color with Aero on! How can I make VNC faster, like Ammyy is? I'd use Ammyy, but I would probably run into the 15hr/month limit pretty quickly. Any suggestions? [EDIT] I'm currently using UltraVNC.

  Read the article

• Apache shuts down from time to time

  - by Dugi

  I'm having trouble with my VPS as it keeps shutting apache down at least twice a day. The server is running on CentOS 6 with the latest apache. By shutting down I mean I have to go into SSH and type in this command in order to bring it up again: /sbin/service httpd start I'm not very good with servers and my host doesn't seem to have a nice customer service. Any help would be appreciated as these unexpected downtimes really know to kill one's mood.

  Read the article

• Recommendations for a cloud/hosted server environment that can run different Windows VMs?

  - by Rory

  I currently have a colocated Win 2008 server that I use for hosting different windows VMs for testing: Win 2008, Win XP, Vista, Win7, Win 2000. I'd like to ditch the server and use something like Amazone AWS but the key thing is I need to be able to launch VMs for these different windows versions. AWS doesn't allow this currently. Can anyone recommend somewhere that I could use? The main reasons I want to get away from my own server are: administration: backup, windows updates, etc space: disk limitations mean I can't have all the VMs I want. I'd like to be able to pay for space incrementally. I'll typically only run 1-3 at a time but want lots of snapshots of different machines.

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• What are the different ways of remotely connecting to your computer?

  - by Rogue

  I'll be leaving for uni soon and would like to know the different methods of connecting remotely to my home pc. I know about VPN but are there any other ways? Also how secure is each of this method as I wouldn't want snoopers on my home-pc especially when I'm away. Also can i set up a remote connection to start and shut down my computer My operating system is windows, but if linux is more secure i would be willing to switch.

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• Windows Server 2008 R2 - Can't connect RDP over the Internet

  - by Jonathan DeMarks

  I have two networks: Domain and Public, Domain is a VPN connection and Public is the local connection to the network. This is not a domain controller or a DNS/DHCP server. I can connect via RDP from the local network (192.168.1.), from the VPN network (10.1.2.), and from the VPN network over the internet. I cannot connect from the internet (anywhere besides where the server is VPN'd) Wireshark indicates that the server is getting packets, and the audit log is indicating that the packets are being dropped. Advanced Firewall has explicit options to allow RDP, and has no deny policies. I have also tried turning Firewall off completely to no avail. I'm really lost on this one.

  Read the article

• Mysql refusing connection: a very special connection issue

  - by k to the z

  I have my programers remoting into a web server with windows rdp. This web server is the only machine that can access another mysql server in a secure zone. When I remote into the web server from my machine I am able to connect to the mysql server through the mysql workbench on the web server. However, when I try this same procedure from another person's computer I can get into the server via rdp. I just can't connect to mysql using the workbench. I have checked and re checked the credentials and connection information. They match. I've had other people check and re check the credentials. As far as mysql permissions are concerned this user is allowed to connect from any machine. Plus I'm remoting into the same web server. The only difference seems to be which computer is remoting into the webserver. wtf?

  Read the article

• What at the Best Practices and tools for managing Windows Desktops from a linux sever ?

  - by JJ

  I know this is a loaded question! What are the best ways to manage Windows (2000, XP, Vista, Win7) workstation from a centralized linux server. I would like to replace the fuctionaility of MS SBS Server with a linux box. The following issues would need to be addressed. File Sharing Authentication, Authorization, and Access Control Software Installation Centralized Login Script Centralized Backup

  Read the article

• Remote App - linked exe

  - by StaWho

  I'm experiencing below problem: I'm trying to run Microsoft NAV as remote app. There are two exe file involved: finsql.exe - main executable and finhlink.exe. Later one is used to directly run a 'window' within NAV (it takes certain link as parameter). This functionality is not present in finsql.exe. After configuring and running finhlink.exe as remote app I get an error "...finsql.exe can't be executed...". I believe it's because finhlink.exe is in fact invoking finsql.exe. Is there a way of allowing invocation of linked executable via remote app?

  Read the article

• PC will POST whenever feels likes it

  - by kyrpas

  I'm really sick of my PC and I'd love to throw it off the 5th floor but unfortunately I don't have this luxury right now. The issues started when I moved to a new house about 2 months ago. I didn't have this problem before. Case: Arctic Cooling Silentium T1 with embedded Fusion 550 Eco 80 PSU. M/B: ASRock A790GMH/128M Gfx: ATI Radeon HD 5770 Here's what's happening almost on a daily basis: I wake up in the morning, switch on the PC and all the fans start spinning. 9/10 the graphics fan stays on 100% and I know it won't post. If I'm lucky, ATI's fan stays on full power for a second, then goes back to normal and I get a normal post but that doesn't happen often. No, instead it's just drives me crazy. When I get no POST I'm trying a lot of different things and what bothers me the most is that they all work. But not always. No... That way I could find out what the hell is going on and we don't want that.. right? So, sometimes it manages to POST if I: remove the keyboard remove the power cable for a few minutes remove the graphics card remove the HDD cables do nothing, just turn it on and off a few times Sometimes it doesn't POST even if I do all of the above. And I end up removing all power cables from the M/B, and connecting all the stuff one by one. Sometimes it works, sometimes it doesn't and I just have to pray and wait. What the hell is that? I'm getting pissed of again just thinking about it. The only solution is to leave it on 24/7 but I don't want to do that. It should be able to turn on and off when I press the power button. I'm not asking much. I'm starting to think there's some weird electricity/power issue but I really don't understand what it is. There's no logical explanation about it. At least I can't find one. Any ideas?

  Read the article

• What is the best way to setup a heartbeat agent for failover between two VMs?

  - by EGr

  I have two VMs in VirtualBox that use NAT for their network adapters. They are both getting the same IP address, so I will need to reconfigure that; but knowing that, is it possible to set up a heartbeat agent to failover an apache server if one of the two VMs go down? The way I pictured it would be that the webserver would be able to be accessed externally via :80. No matter what VM was running, I would be able to access the website at that IP/port since failover would be setup. I'm running into trouble setting up IPs when the network adapters are set to NAT, and people have told me that I shouldn't be setting the IPs in this configuration. So what should I do to achieve what I'm looking for? Is it even feasible?

  Read the article

• Is there a way to log commands that a user runs in Windows 7?

  - by camster342

  I manage a large enterprise environment, and while we try to advise users not to, there are inevitably users that need to have local admin access to their machines. The problem is that some of these users like to "fiddle" and sometimes screw up their machines in "wonderful" ways. Is there an easy way to log what a user does on a machine, specifically in the command prompt? Maybe there is 3rd party tools I could use to log this information? With Linux that I used to use in past ages, you could look at a users bash history file to see what commands they have run. While I realise that specific log could also be altered by the user if they wanted to cover their tracks, that is the sort of log I'm looking for. If there are other ways I can also log what other system configuration type changes they make as well (not necessarily command line based), that's also useful. I know about event/system logs and so on, but that doesn't necessarily catch all the information I need to figure out how the user has buggered their machine this time.

  Read the article

• How to tell Linux to explicitly swap out main memory of suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

• Computer won't start up. Stuck on Lenovo splash screen. Help Diagnose

  - by Ace Legend

  I have some (I'm not sure exactly what model) Lenovo 21" IdeaCentre. Honestly, the computer works off and on. I have had problems with it not being able to shutdown, which I fixed. The fan seems to be constantly running, a few other problems as well. Anyway, nobody was using it when all of a sudden it switched to a blue screen. I was in the kitchen, but when I got over to the computer I read the message. It said something about bad drivers, but that is all I saw and then it restarted. However, when it got to the Lenovo Splash screen, nothing happened. I waited there for over 10 minutes, but still nothing. I tried to turn of the computer, but the only way to do it was to pull out the power cable. I then removed all USB devices and tried again. Still nothing. It also won't respond to keyboard input when I try to use enter to interrupt normal startup. My guess is some piece of hardware is damaged inside the machine. However, I have no idea what piece it is. Does anybody have any idea what could be wrong with it? Thanks.

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >