Search Results

Search found 54080 results on 2164 pages for 'wireless access point'.

Page 183/2164 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

  • Stack-based keyboard delay using Logitech MX3100 keyboard

    - by Mark S. Rasmussen
    I've been using a Logitech Cordless Desktop MX3100 keyboard for quite a while. I've never really had any problems, except for the occasional typo. I noticed however that I tended make the typo "Laod" instead of "Load", quite a bit more often than any other typos. As it started to get on my nerves, I decided to do some testing. What I found out was than when I write lowercase "load", I'd never make the typo. All uppercase, or just uppercase L, I'd make the typo quite often. My actual (very scientific) testing is probably best described by showing the output: moatmoatmoat MoatMoatMoat loatloatloat LaotLaotLaot loafloafloaf LaofLaofLaof hoathoathoat HoatHoatHoat hoadhoadhoad HoadHoadHoad lortlortlort LrotLrotLrot What i found out was that whenever shift was depressed, typing an uppercase "L" would induce a significant lag if the next character was an "o", compared to the lag of the any other key: High "o" lag: LoLoLoLoLoLo No "a" lag: LaLaLaLaLaLa No lag for neither "o" nor "a": lolololololo lalalalalala By realizing this I regained a slight bit of sanity as I knew I wasn't coming down with a case of Parkinsons. I was actually typing correctly, the lag just interpreted it wrongly. Now, what really bugs me is that I can't fathom how this is occurring. What I'm actually typing, in physical order, is this: L - o - a - d, and yet, the "a" is output before the "o", even though "o" was pressed before "a". So while the keyboard is processing the "Lo" combo, the "a" gets prioritized and is inserted before the "o" is done processing, resulting in Laod instead of Load. And this only happens when typing "Lo", not when typing lowercase "lo". This problem could stem from the keyboard hardware, the receiver hardware or the keyboard software driver. No matter the fault location however, I can't imagine how this could be implemented as anything but a FIFO queue. A general delay, sure, I could live with that, albeit I'd be irritated. But a lag affecting different keys differently, and even resulting in unpredictable outcome - that just doesn't make any sense. I've solved the problem by just switching to a wired keyboard. I just can't shake it off me though; what kind of bug/error/scenario would result in a case like this? Edit: It's been suggested that I stop drinking Red Bull and stick to water instead. While that may actually help solve the issue, I'm really not looking for a solution as such. I'm more interested in an explanation of how this could happen, as I can't imagine any viable technical solution that could result in this behavior.

    Read the article

  • voice transmission using Wi-Fi in Ad hoc networking mode

    - by iam0hot
    We are looking to create Inter Vehicle communication system. So, a couple of vehicles should get connected automatically and could be able to share voice.. We decided to implement ad-hoc networking using Wi-Fi.. we are expecting it to cover a radius of 100 mts. If we could create a system like this.. and one of the user sends a voice information, does all people in the network get that ? What are the things we require to get this project done ?

    Read the article

  • tomato firmware unstable when I am connected to Chromecast

    - by Graviton
    I have an Asus RT-N12D1, and I installed the tomato firmware by shibby ( version tomato-K26-1.28.RT-N5x-MIPSR2-112-Max.trx). However I found that the connection can be really unstable. Whenever I stream youtube videos on TV via Chromecast ( I tried both the cast from iPad and Win7, both can reproduce the problem), the router will frequently restart itself, leading to a loss of connection and subsequent reconnection. I want to get this problem fixed, but I don't know how. Is there anyway where I can troubleshoot what is the real problem, or is there anyway I can collect enough log information so that I can then present to the original developer for a fix ( maybe)?

    Read the article

  • Prevent Outlook from automatically deleting meeting emails

    - by Wavy Crab
    I'm using Outlook Web Access to read my email. When I receive a meeting notice and acknowledge it, Outlook adds it to my calendar then deletes the email. Is there a way to disable Outlook automatically deleting the meeting email? There doesn't seem to be any way to configure this in Options - Messaging and Options - Calendar. Note that I'm using Outlook Web Access and not the desktop client. From the copyright date this appears to be Outlook 2007. Follow-up: Based on edusysadmin's comment I logged-in using IE8, which exposed a setting not available in Firefox - "Move out-of-date meeting requests and responses to the Deleted Items folder". However unchecking this box doesn't seem to impact the auto-delete behavior. Follow-up 2: Keep in mind I am using Outlook Web Access via a web browser. I do not have the thick client Outlook installed.

    Read the article

  • Creating an ad-hoc wireles network on a router

    - by bo7ons
    My router is a Wag200g with openwag firmware. My laptop is connected to the university's internet through an ethernet cable and i have to set the browser proxy settings to connect. I want to create an ad-hoc network with a router so that i can let my laptop do the proxy routing/forwarding itself and that my android phone can connect to it and use my university's proxy (I've tried setting the proxy on my phone but it wont work).. Or am i approaching this the wrong way?

    Read the article

  • accessing a web server from the LAN and WAN

    - by jessh
    My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

    Read the article

  • openwrt uses a single interface bridge?

    - by timbo
    My understanding of bridging is that it ties together two interfaces at layer 2. I am looking at a Ubiquiti Nanostation2 running OpenWRT that has an ethernet port 'eth0' and a wifi port 'ath0'. The ethernet port (the 'wan' port) is not part of the bridge and the bridge is just a single interface. Can anyone clarify this? - seems very different to Ubuntu. /etc/config/network: config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' config 'interface' 'wifi' option 'ipaddr' '192.168.13.1' option 'type' 'bridge' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ifname' 'wifi0'

    Read the article

  • Cisco ASA - Enable communication between same security level

    - by Conor
    I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

    Read the article

  • Can't find newer DLINK Router DIR-400 firmware

    - by Junior Mayhé
    If you're here, it means you also have a Dlink 400 router. I asked DLINK but they didn't answer my question. I asked DLINK support again, but this time no answer (2 weeks later). In DLINK FTP site there is no firmware for DIR-400. Past year, Googling around Russia, I found a FIRMWARE_DIR400_v1.02B03.bin. But I am trying to figure out if is there any update, a 1.03 version or superior. Can anyone tell me why DLINK doesn't show this firmware update on their site, and if this DIR-450 is compatible with mine?

    Read the article

  • Intermittent connection issues with atheros ar9285

    - by MrStatic
    I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

    Read the article

  • How can I auto-connect to a WPA2 Enterprise network?

    - by Demetri
    I would like my computer to automatically connect to a WPA2-Enterprise network as soon as it boots whenever the network is available, without any action needed by me. The computer already offers to connect, and even remembers the password, but I must still hit 'Enter' to connect. Also, connection does not occur if my login is at the terminal. I would like to automatically connect every time I login, no matter how I do so, unless a more preferred network is available. What is the best way to do this? I am running Fedora 19. A shell script that can be invoked at the terminal would be preferred. Connecting even if the Gnome-desktop has not launched is a must.

    Read the article

  • What speed are Wi-Fi management and control frames sent at?

    - by Bryce Thomas
    There are a bunch of different 802.11 Wi-Fi standards, e.g. 802.11a, 802.11b, 802.11g, 802.11n etc. that all support different speeds. Wi-Fi frames are generally categorised as one of the following: Data frames - carry the actual application data Control frames - coordinate when its safe to send/reduce collisions Management frames - handle connection discovery/setup/tear down (e.g. AP discovery, association, disassociation) My question is about whether all these frames, and specifically management frames, are transmitted at the fastest supported speed available, or whether certain classes of frames are transmitted at some lowest common denominator speed. I have noticed that when I put an 802.11b/g only device into monitor mode and capture traffic over the air, I still see management frames (e.g. association/disassociation) being transmitted between my phone and AP which are both 802.11n, even though 802.11n has a higher transfer rate. So I am imagining one of two possibilities: My 802.11n phone/AP had to negotiate a slower speed for some reason and that's why I can see their frames on my 802.11b/g monitoring device. Management frames (and perhaps control frames also?) are sent at a lower speed, and it's only data frames that are transmitted faster with newer 802.11 standards. The reason I would like to know which one of these two possibilities (or perhaps a third possibility) is the case is that I want to capture management frames, and need to know whether using an 802.11b/g card is going to lead to me missing some frames sent at higher speeds than the monitoring card can observe. If management frames are indeed sent at a slower rate, then it's all good. If I just happen to be seeing the management frames because my phone/AP have negotiated a slower rate though, then I need to reconsider what card I use for packet capture.

    Read the article

  • Unable to connect to FTP server using Filezilla with router in-between

    - by pkswatch
    While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

    Read the article

  • Verizon HTC Eris - No sound on incoming phone call after 2.1 droid upgrade. Help!?

    - by Michael Rosario
    Has anyone had the following issue? I've had several issues as well: No sound when call connects, ringing or people talking. Apps would force close like weather. I did call HTC support and they had me go into Menu, Settings, Manage Applications and then clear the cache of the problem app. They also had me clear the cache once the browser was open and then do a soft reset (power off the phone and take the battery out for 15 seconds) This did fix some issues, but I am constantly turning my phone on and off to get sound back on call or to make the assigned ringtones work. There's no rhyme or reason as to why they stop working... Anyone else tried anything different??? Related problem statement... http://community.htc.com/na/htc-forums/android/f/32/p/2601/10344.aspx#10344 My wife and I are most concerned about the incoming call issue.

    Read the article

  • Mac download speed keeps decreasing

    - by hatorade
    I have a Mac that is getting extremely low connection speed from my WiFi. The other 3 computers in this house have a fast connection. However, on this Mac, once I connect to WiFi it's fast, but as time goes on the speed decreases dramatically. I thought it was the browser or something (Safari) so I downloaded Firefox, but I have watched the download speed decrease consistently as time goes by and right now it's at 8kb/sec instead of the 60-200 range it started at. Any suggestions?

    Read the article

  • Suspected Router problems, [closed]

    - by jordon_user
    I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

    Read the article

  • Passive Scan using wpa_supplicant-0.7.3

    - by Ashish Yadav
    I am using wpa_supplicant-0.7.3 and WL12xx TI Driver(WiFi) . Looking into both code,I seen that both support passive scan . Also, nl80211 driver is used (not wext). I am not able to find any command for passive scan in wpa_cli . With iw , for passive scan we can use : iw dev wlan0 scan passive Similar I want to do passive scan using wpa_supplicant . So need help to know how to do passive scan using wpa_supplicant?

    Read the article

  • How to use the AWUS036H on MacBook Pro with Lion and Backtrack in VM?

    - by Swader
    I have the AWUS036H USB WiFi adapter and have recently upgraded the OSX to Lion. The thing is, there are no drivers for Lion for the AWUS036H, and I would have to boot into 32bit mode every time I want to launch the adapter as per instructions here: http://www.youtube.com/watch?v=n9_HAGi1ce0 I also want to install BackTrack as I deal in networks a lot for my company. While this would be a simple matter on any other laptop, the company issued Macbook does not allow booting into any OS other than MacOSX or Windows with Bootcamp. Now, since dual booting into BT is not an option, I would like Backtrack to run in VM inside my MacOSX Lion - and this it does. It works like a charm inside VirtualBox. But since there are no 64bit drivers for the wifi adapter, Lion doesn't recognize it and cannot install it. This, in turn, means that Backtrack cannot see it even though AWUS036H usually works flawlessly with BT. How can I make my VM-based BT see the wifi adapter even if the parent OS doesn't see it, if at all? Is there a way, or am I better off buying a new WiFi adapter that supports OSX 10.7 such as the AWUS036NHR?

    Read the article

  • Best way to transfer files across unstable LAN?

    - by JamesTheAwesomeDude
    This is very similar to Question 326211, but in this case, the LAN is an unstable Wi-Fi connection. I need to transfer about 11 GiB of files between two computers, both running Linux (although one may be rebooted into Windows.) Their connection is both slow and unstable (due to Linux's awful Wi-Fi support,) but removable media (such as a flash drive or external hard drive) is not an option at this time. Right now, I'm slowly transferring the files, one by one, across SFTP, but I have to reconnect each computer approximately every 90 seconds, and the computers are not very close to each other, so this is not feasible. This is not a duplicate of Question 30186; that one specifically concerns Windows 7, and all the proposed solutions involve closed-source, Windows-only programs (which are all spyware IMHO, and are all off the table even if I trusted them - one of the computers is Linux-only.)

    Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >