Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 185/956 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Reconnect Attempts for CIFS share

  - by Davin

  I have a CIFS share mounted in the FSTAB on Ubuntu server, which connects to our SAN and works without issue. Last night we had an issue with the SAN for about 12 hours. We corrected the problem and the Windows boxes restored their mappings. The Ubuntu box did not, but we were able to restore with [mount -a]. I saw options to specify retries in man for NFS but not CIFS. Any ideas on ensuring a reconnect if the SAN goes down again?

  Read the article

• USB Wireless keyboards not registering Ctrl Alt Delete when computer boots

  - by Donovan

  I've recently installed a new PC at work. Its a Dell Optiplex 9010. I bought a USB wireless keyboard and mouse from Dell and subsequently from Logitech to use with this PC. The Dell keyboard is a model KM632 and the logitech is an mk260. Both units work properly and have decent range. The issue is when the PC boots they keyboard (neither model) will register a Ctrl+Alt+Delete to the PC. I can say for sure the keyboards are still functional as the media keys will still produce a result (notably the sleep key on the mk260). My gut reaction is I'm dealing with an issue in the PC or Windows. I'm not sure where to start though. If I unplug and reinsert the USB dongle both units will work. Also, I don't use both they keyboards at the same time I bought the Logitech fearing the Dell unit was bad. Any ideas would be appreciated.

  Read the article

• How to fix "Disk drive for /boot/efi is not ready or not present"?

  - by N.N.

  After I updated BIOS/UEFI version to 1101 on an Asus P8Z68-V PRO motherboard Ubuntu (11.10) did not boot. After POST all I saw was a black screen with a blinking cursor in the top left corner. I booted an Ubuntu 11.10 live-CD and set the flag for the 20 MB partition before my boot partition to "bios_grub". Then I was able to boot and login. But now every time I boot and Ubuntu loads I get the following message: Disk drive for /boot/efi is not ready or not present. Continue waiting or press s to skip or m for manual recovery. I am able to login if I choose to ignore it by pressing s, but what does this message mean? How can I fix what the message warns about? After logging in I have noticed that /boot/efi is empty. The following forum post speaks of the same issue ubuntuforums.org/showthread.php?t=1893030. Updating to the latest BIOS/UEFI - version 3203, did not have any effect on this issue.

  Read the article

• pros-cons of separate hosting accounts versus using addon domain

  - by hen3ry

  Folks: For historical reasons, I have "Site A" on "Hosting Account A", and "Site B" on "Account B", totally independent accounts with the same vendor, Bluehost. Both are primary domains. Now that Hosting Account B is just about to expire, I'm considering letting it disappear and moving Site B to an Addon domain on "Account A". Both sites are non-commercial, narrow-interest, very-low-traffic, hundreds of page views per month. The file weights for the sites are non-trivial, especially as I like to install specialized CMSs in subdomains. Since Bluehost allows unlimited hosting space there should be no issue with the file load, except I've seen hints of an issue with total file count, maybe 50k files -- which I'm not currently close to hitting, but might eventually. My question: what are the pros and cons of using separate accounts versus hosting Site B as an addon domain? Obviously, using a single account is cheaper by half, and I know that my authoring environment (DreamWeaver CS5) complains when it detects nested source trees, telling me "Synchronization" might fail in such cases, but I don't depend on this feature. What other factors should I consider? TIA

  Read the article

• Dialing into multiple PPP connections on Ubuntu

  - by sharjeel

  I have multiple 3G USB based Modems. I would like them to keep connected simultaneously, NOT necessarily aggregating their bandwidth; a separate intelligent application would manage their utilization effectively. However I am running into problem of setting up proper routes for the ppp0,ppp1 interfaces: when one of them connects, other's entries in the routing table get updated so it is no more usable. If I reconnect the second one, it would override the first one's routing entries. If I do it over and over, sometimes both of them's entries disappear while in rare cases the two work well. I have tried it both using NetworkManager as well as WVDial but issue pops up in both of these. Perhaps both of them use same PPP dialer at the backend and thats why this issue appears. What is the proper solution to make them work together? In the long run, I'd also like them to automatically dial in once USB gets connected.

  Read the article

• Exchange Management Console Listing Extra Servers

  - by Zak G

  I recently decommissioned an Old Exchange 2003 server. Prior to the decommissioning, the environment consisted of 2 EXCH 2010 and that one EXCH 2003 server. I went through all the steps listed in Microsoft documents and online in how to remove the server completely (pruning the AD and all that jazz). When I go to Exchange Management Console it still lists 3 total servers in the "Server Summary" column in the Organizational Health tab. When I click manage servers, it only lists the 2 EXCH 2010 servers. I am aware this is only a cosmetic issue but I would appreciate it if anyone can share some advice on how to fix the issue.

  Read the article

• Need advice on framework design: how to make extending easy

  - by beginner_

  I'm creating a framework/library for a rather specific use-case (data type). It uses diverse spring components, including spring-data. The library has a set of entity classes properly set up and according service and dao layers. The main work or main benefit of the framework lies in the dao and service layer. Developers using the framework should be able to extend my entity classes to add additional fields they require. Therefore I made dao and service layer generic so it can be used by such extended entity classes. I now face an issue in the IO part of the framework. It must be able to import the according "special data type" into the database. In this part I need to create a new entity instance and hence need the actual class used. My current solution is to configure in spring a bean of the actual class used. The problem with this is that an application using the framework could only use 1 implementation of the entity (the original one from me or exactly 1 subclass but not 2 different classes of the same hierarchy. I'm looking for suggestions / desgins for solving this issue. Any ideas?

  Read the article

• How to refactor when all your development is on branches?

  - by Mark

  At my company, all of our development (bug fixes and new features) is done on separate branches. When it's complete, we send it off to QA who tests it on that branch, and when they give us the green light, we merge it into our main branch. This could take anywhere between a day and a year. If we try to squeeze any refactoring in on a branch, we don't know how long it will be "out" for, so it can cause many conflicts when it's merged back in. For example, let's say I want to rename a function because the feature I'm working on is making heavy use of this function, and I found that it's name doesn't really fit its purpose (again, this is just an example). So I go around and find every usage of this function, and rename them all to its new name, and everything works perfectly, so I send it off to QA. Meanwhile, new development is happening, and my renamed function doesn't exist on any of the branches that are being forked off main. When my issue gets merged back in, they're all going to break. Is there any way of dealing with this? It's not like management will ever approve a refactor-only issue so it has to be squeezed in with other work. It can't be developed directly on main because all changes have to go through QA and no one wants to be the jerk that broke main so that he could do a little bit of non-essential refactoring.

  Read the article

• What causes player box/world geometry glitches in old games?

  - by Alexander

  I'm looking to understand and find the terminology for what causes - or allows - players to interfere with geometry in old games. Famously, ID's Quake3 gave birth to a whole community of people breaking the physics by jumping, sliding, getting stuck and launching themselves off points in geometry. Some months ago (though I'd be darned if I can find it again!) I saw a conference held by Bungie's Vic DeLeon and a colleague in which Vic briefly discussed the issues he ran into while attempting to wrap 'collision' objects (please correct my terminology) around environment objects so that players could appear as though they were walking on organic surfaces, while not clipping through them or appear to be walking on air at certain points, due to complexities in the modeling. My aim is to compose a case study essay for University in which I can tackle this issue in games, drawing on early exploits and how techniques have changed to address such exploits and to aid in the gameplay itself. I have 3 current day example of where exploits still exist, however specifically targeting ID Software clearly shows they've massively improved their techniques between Q3 and Q4. So in summary, with your help please, I'd like to gain a slightly better understanding of this issue as a whole (its terminology mainly) so I can use terms and ask the right questions within the right contexts. In practical application, I know what it is, I know how to do it, but I don't have the benefit of level design knowledge yet and its technical widgety knick-knack terms =) Many thanks in advance AJ

  Read the article

• Remote Debugging

  - by Pemdas

  Obviously, the easiest way to solve a bug is to be able to reproduce it in house. However, sometimes that is not practical. For starters, users are often not very good at providing you with useful information. Costumer Service: "what seems to be the issue?" User: "It crashed!" To further compound that, sometimes the bug only occurs under certain environmentally conditions that can not be adequately replicated in house. With that in mind, it is important to build some sort of diagnostic framework into your product. What type of solutions have you seen or used in your experience? Logging seems to be the predominate method, which makes sense. We have a fairly sophisticated logging frame work in place with different levels of verbosity and the ability to filter on specific modules (actually we can filter down to the granularity of a single file). Error logs are placed strategically to manufacture a pretty good representation of a stack trace when an error occurs. We don't have the luxury of 10 million terabytes of disk space since I work on embedded platforms, so we have two ways of getting them off the system: a serial port and a syslog server. However, an issue we run into sometimes is actually getting the user to turn the logs on. Our current framework often requires some user interaction.

  Read the article

• Title of the page in search results and title of google's cached version are different. Why?

  - by Azmorf

  Check this: http://www.google.com/search?q=site:gunlawsbystate.com+kansas+gun+laws The title of the first result is "Kansas Gun Laws - Gun Laws By State". Although, on the page google has cached the title is different: <title>Kansas Gun Laws - Kansas Gun Law - Reciprocity Guide</title> Google shows the title that has been on the site 2-3 months ago. Google bot has visited the website a lot of times since that, and as you see it even cached it (the latest version is of 15th Sept), however for some reason it doesn't change the title to the new one in the search results. We use hash-bang URL structure on this website. It completely meets google's requirements for AJAX websites (_escaped_fragment_ stuff). The issue I explained is happening with almost all hash-bang pages that got indexed. Questions: Why does it keep old page title in the search results? Can it be connected to the fact that I'm using hash-bang URLs? There are lots of pages on the site that have the same issue, all of them have hash-bang URLs. Another thing I noticed is that Google's "Preview" feature doesn't work for any hash-bang URLs on the site. Did I do anything wrong? It has got cached versions of the pages, why wouldn't it generate a preview? Thanks (and sorry for my English) PS. Here's a weird thing I also noticed: this search query https://www.google.com/search?q=Kansas+Gun+Laws+-+Reciprocity+Guide shows the correct title for the same page as in the example above. Why does google show different titles for the same page when you run different queries?

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• "This file can't be previewed because of an error in the Microsoft Word previewer."

  - by danielson

  The issue is: Outlook 2013 simply will not give a preview of Word (nor Excel) docs in attachments. Never had the issue with Outlook 2010. Using Outlook 2013 on Windows 7 64bit SSD with Word 2010. I did notice that "Microsoft Word" is not listed specifically in Trust Center attachment handling, could that be part of the problem? Excel, Visio, RTF and many more are there. Update: strange, search can be performed in Word attachments... but can't preview Word file. So, Outlook can 'see' Word docs but won't let us have that preview. For reference, here is a similar question I posted in the Microsoft Answers forum.

  Read the article

• What Commands Does Windows Startup Repair Run?

  - by user138284

  Background: I created a wim image that we are planning to deploy to some of our computers, but when I image a computer with it from a flash drive it continually reports that the BOOTMGR is missing (and no, it's not booting off the flash drive). I am able to resolve this by running Windows Startup Repair, but I would rather just add whatever command is resolving the issue to a script that runs after the image. I have already tried running fixmbr, fixboot, rebuildbcd, and nt60, but none of those resolve the issue. Basically, I would like to know what exactly is being done when I run Windows Startup Repair.

  Read the article

• Sound in Ubuntu 12.10 on Chromebook

  - by Paul Mennega

  I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

  Read the article

• Slow Starting DHCP Client Service - HP Thin Clients

  - by Ryan

  We have recently began adding XPe thin clients to our domain in preperation for a new citrix environment. One thing that has been picked up on in testing is that they appear slow to boot. The issue manifest's it's self as the classic "Applying Computer Settings..." screen we are all used to seeing. After digging into the issue it appears the DHCP Client service is taking some time to load on boot, this varies but I would estimate it can take around 1 minute in some cases. I've eliminated the classic issues, DHCP is responding correctly and in quick time. DNS is not the cause and GPO's are applying promptly. A simple workaround is to assign the client a static IP which work's great so the TCP/IP servies are obviously firing up quickly, just not DHCP Client. Does anyone have any idea's on how I may be able to improve the service start time? Keen to find a better solution before I get my arm twisted into setting up 250 thin clients with static addressing!

  Read the article

• Strange noise from my laptop when it is closed

  - by gotqn

  I am fan of powerfull PCs with huge wide screen monitors but I have bought an laptop as gift to my parents. This is the description: "second-handed" lenovo (and there is a sign "ThinkPad" Intel Core Duo CPU T6570 2.10 GHz 64 bits Windows 7 Ultimate and the issue is that when the laptop is turn on and then closed, after a interval of time (I am not sure how much exactly but I believe it is several hours) a strange noise come from the laptop. The noise is something like a "start-up" noise of old computers. I first thought this is some hardware issue but everything seems to work fine. Has anyone an idea what can cause this type of noise or a what can I do in order to track the problem down? I am not sure if this is a important thing, but the laptop is always connected to the power. Note: I have just noticed that the sound is generated again when the laptop is closed and then opened. Note: This is link to the audio - http://yourlisten.com/channel/content/16934332/WindowsStrangeNoise

  Read the article

• Steps to make sure network is not blacklisted...Again

  - by msindle

  I have an interesting issue. I have a client that just got blacklisted due to spam being sent out over the last 2 days. I have my firewall configured to only allow mail to go outbound on port 25 from our mail server (Exchange 2010) exclusively and I have verified that there are no open relay's on our transport rules. We are running Vipre Business and after running deep scans with updated definitions all computers come back clean. I ran a message tracking report on our Exchange server that shows all mail sent via the mail server over the last couple of weeks and didn't see anything malicious or out of the ordinary. I have also verified that there are no home devices or rouge computers on the network. For all practical purposes it appears that the network is clean, but we still wound up on 5 or 6 blacklists...Where should I start looking next? Is there a "best practices" guide that can help eradicate this issue? Thanks in advance! msindle

  Read the article

• Hidden characters inserted after pipe (|) followed by a space

  - by nifty

  Very often, on my Mac, when I use the pipe (|) character followed by a space character, an invincible character will be inserted in between. This is especially annoying when using the terminal, as it makes commands invalid. If I type the following in iterm2, I often get the following: ls | cat zsh: command not found:  cat If I hit the up-arrow-key to get my previous command, and then remove and reinsert the space between | and cat, the command will work. When I copy paste the working and non working commands into a file, like this: non-working: ls | cat working: ls | cat and open it in Hex Fiend it shows the following: non-working: ls |¬†cat working: ls | cat I've also experienced the same kind of issue in SublimeText2 using the square brackets ([]) followed by a space. So I don't believe its an issue with iTerm2.

  Read the article

• diagnosing random power down crashes on a hackintosh [closed]

  - by Iain

  I have a hackintosh running on a Gigabyte P55M UD2. It has run without a single issue as a hackintosh for about 9 months, and the machine is about 2.75 years old. Never had issues when it was just linux box. Power supply is 750 Watts. It recently started spontaneously rebooting, no seeming connected to any particular use case or ram/cpu load. There is no hanging or anything, just suddenly acts like the power went out. The frequency of which seems to be increasing. I've tried using just one of each of the two ram sticks, and it happens with either one in. I'm not sure what to try next, is there some way of determinging whether it's a mobo, cpu, or powersupply issue short of replacing them all? thanks! Iain

  Read the article

• What can be the cause of new bugs appearing somewhere else when a known bug is solved?

  - by MainMa

  During a discussion, one of my colleagues told that he has some difficulties with his current project while trying to solve bugs. "When I solve one bug, something else stops working elsewhere", he said. I started to think about how this could happen, but can't figure it out. I have sometimes similar problems when I am too tired/sleepy to do the work correctly and to have an overall view of the part of the code I was working on. Here, the problem seems to be for a few days or weeks, and is not related to the focus of my colleague. I can also imagine this problem arising on a very large project, very badly managed, where teammates don't have any idea of who does what, and what effect on other's work can have a change they are doing. This is not the case here neither: it's a rather small project with only one developer. It can also be an issue with old, badly maintained and never documented codebase, where the only developers who can really imagine the consequences of a change had left the company years ago. Here, the project just started, and the developer doesn't use anyone's codebase. So what can be the cause of such issue on a fresh, small-size codebase written by a single developer who stays focused on his work? What may help? Unit tests (there are none)? Proper architecture (I'm pretty sure that the codebase has no architecture at all and was written with no preliminary thinking), requiring the whole refactoring? Pair programming? Something else?

  Read the article

• First Installation

  - by Dj Zia

  I had windows xp on my desktop originally. Yesterday we were able to replace this with Ubuntu 12.04 from a thumb drive. The live CD did not work. I am more familiar with the system they introduced me to in School recently. Linux pretty much has similarity all around so I am finding the differences not as much of an issue. So, there were a few issues with the installation and getting Grub to start working. There is the low graphics issue which brings us to the command line basics. I am a little familiar with linux so it isn't too intimidating; I am really good with step by step instructions in simple order. My question is Ubuntu installed with out any basic driver's or generic header's. It also is not connecting my computer to the internet. My system is older not new. For the time it had above average parts. How do I solve the problem of Getting the header's, making sure the right configurations are set, and where do I get the driver's for my white box desktop to run Ubuntu properly? Thank you

  Read the article

• How to Restart Windows Update Service in Windows 7?

  - by N.O.R.G.

  I'm running into an issue with Windows Update on Windows 7 Professional. I am totally up to date in Windows Updates as of last week, but discovered this issue [today] during my Sunday morning PC maintenance ritual. In CONTROL PANEL - SYSTEM & SECURITY - Windows Update, when I select "Check for Updates", I get a pop-up stating: "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." I've re-started several times, checked that the service hadn't been disabled at start up, and I've googled extensively on the topic - but have come up with nothing. I know there must be some way to start the service from the cmd line, and I would like to know how to get the service to start at boot. Please let me know if I have left any details out that may aid in formulating a response. Any of the community's excellent insights would be greatly appreciated!

  Read the article

• IE and Chrome won't browse the internet on dial up but firefox will. How could I fix it?

  - by Kelbizzle

  First let me say I've done plenty of troubleshooting and will try to explain as clearly and as much as I can. Please bear with me. I have a client's computer who uses dial-up and Windows XP. The problem is when I connect to the dial up ISP. IE or Chrome will not browse the internet. It says page cannot be displayed. but if I use firefox on the dialup connection it works. Sounds simple enough there has got to be something wrong with the proxy settings or something...well, that's what I thought here is the weird part. When connected to the LAN in my office IE, Chrome, and FF all work. I upgraded to ie8 and the issue still happens. How would you go about troubleshooting this issue? What should I do next?

  Read the article

• Is DevCon.exe still the best way to restart/power cycle USB ports after resuming from hibernation in

  - by ProfessionalAmateur

  I have a USB broadband card on my Windows 7 laptop. It loathes resuming from hibernation properly. Back in the XP days I would issue a call devcon.exe from the command prompt and restart the selected ports (Saves you having to manually unplug and plug back in your USB devices). Ive been trying this is Windows 7, but the UAC keeps getting in the way. I'll start a command prompt. Issue the devcon command, but UAC asks me if I really want to do this, when I click yes it opens a different command prompt and launches the command. After the command completed this new prompt window closes faster than the speed of light and I cannot see the results. So Im thinking there has to be a better way to do this in the Vista/Win7 world...?

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >