Search Results

Search found 8555 results on 343 pages for 'virtualbox networking'.

Page 186/343 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• Improve wireless performance

  - by djechelon

  Hello, I have a Trust Speedshare Turbo Pro router, which is running on channel 6. I found that the wireless signal (and network performance) dramatically drops from my PDA (I can barely attach to the network, even if I set the PDA's energy settings to maximum wireless performance) when I even exit my room, and I don't have shielded walls or something like that. I can't even stream a SD video from my desktop (connected via LAN) to my laptop using WiFi, while via LAN it works fine. I read that changing router's channel could improve performance due to interference reducing. I found that almost all wireless networks around here run on channels 6 and 11. I tried to go to my router's settings page to change channel, but I found that the combo box only allows me to select 6!! I'm not sure, but I may have been able in the past to change channel, though not to all of the available channels. A few minutes ago I tried a firmware upgrade, but it didn't solve my problem. My question is Is it possible that my router is someway locked to its channel? I bought it on my own, I didn't receive it from my ISP Apart from boosting the antenna power to the maximum (which, by the way, increases the EM radiation my and my family's bodies absorb 24/7 and is little more environment-unfriendly), do you have any tips on getting high quality transmission up to 5 metres from the antenna? Thank you

  Read the article

• Retrieve a domain name based on an IP Address?

  - by Neil Kodner

  I'm reviewing some apache logs, specifically with respect to downloaded files. I'm interested in knowing, if possible, which domain is responsible for the download, given an IP address. I've given nslookup a try and it seems to (mostly) get the job done but it returns all sorts of extraneous information. Ideally, I pass in an IP and receive a domain back. Before I write a shell script to parse the output of nslookup to capture the domain, I'd like to know if this is the best way of approaching this problem, or if there is a more tried-and-true method of doing this. Specifically, I'd like to know if an address resolves to an amazonaws.com domain. I understand that this might be difficult because EC2 machines are dynamically created and destroyed - I'd like to know if the IP addresses for AWS/EC2/EMR machines fit any sort of addressing pattern.

  Read the article

• Creating a network link between 2 very close buildings

  - by Daniel Johnson

  I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single computer in one of the buildings. They want to add a network with wireless, and want it to work across both buildings. Being a charity they need to keep costs down. The network would be used for sharing Word documents, e-mail, browsing and skyping. My initial thoughts were to connect the buildings with fibre. So: Option 1 Use fibre between the buildings. Sufficient cable and two TP-LINK MC100CM Fast Ethernet Media Converters. Cost ~£80.00. But there is the extra cost and hassle of running the cable down and up the external walls, lifting and relaying paving, and burying underground. Never having fitted fibre I'm also a little worried about going up the wall and then bending the cable at 90 degrees to go through the wall and into the building. Option 2 Use two TP-Link TL-WA7510N High Powered Outdoor 5Ghz 15dBi Wireless antennas to connect the buildings. There is a clear line of sight at first floor level. Cost ~£100. And much easier to fit than fibre! Is using the TL-WA7510Ns overkill? Is there something more suitable? I had hoped to use some Netgear stuff, e.g. two DGN2200, one in each house and also use them to provide the wireless link between the buildings. However, in bridge mode wireless client association is not available and repeater mode with client association only supports WEP security which isn't strong enough. Is there something similar that would be up to the job? Option 3 Connect the buildings with UTP cable. My concerns here are risk of electric shock due to a difference of potential between the buildings (or are they so close this shouldn't be an issue) and protection from lightning strikes. Is fitting lighting arrestors expensive? And what can be done to ameliorate against the risk of shock? This all falls outside my area of expertise so I would really appreciate some advice.

  Read the article

• Shielded ethernet cable and ethernet sockets earthing how to?

  - by ageis23

  Hi I'm going to install 5 Ethernet sockets in my house using cat5e shielded cable. I decided to use this because the sockets will be on the second floor and the most practical way up is within a trunk along with some mains wiring. The cable will be terminated at the router and at the Ethernet faceplate. What can I use to earth then? The faceplate/router are both plastic hence no earth wire needed. I can't use the earth wire within the main socket can I? I figured it will be very very dangerous. I don't want to be connecting to the earth block on the mains either since I totally incompetent when it comes to mains electricity.

  Read the article

• VLC RTP Streaming in FC12

  - by Matt D

  I'm trying to get VLC to work streaming RTP audio/video over my office network. The goal is multicast a/v streaming. In all test cases, we are streaming from VLC to VLC. I am able to stream from Windows to Windows, and from Fedora to Windows, but not from Windows to Fedora. Additionally, I am unable to receive a LOCAL stream from one instance of VLC to another, within Fedora. I don't see any reason why this would be. The buffer indicator (where the elapsed/total time is normally displayed) never shows any connectivity, so it would appear to be a network problem, but since I am able to stream from Fedora to Windows (same IP, same port) I thought it would be something else. Does anyone know of a solution to this issue?

  Read the article

• how do I set up a virtual host (it's not working, and I've done everything right)

  - by piratepartypumpkin

  My router redirects port 80 to port 8080. My router works fine and my domain name is routed properly. This is my virtual hosts file: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /home/admins/lampstack-5.3.16-0/apps/wordpress ServerName example.com ServerAlias www.example.com </VirtualHost> I can access my website by entering "mywebsite.com:8080" but I cannot access it by entering "mywebsite.com" For further information, this is a part of my httpd.conf: Listen 8080 Servername localhost:8080 DocumentRoot "/home/admins/lampstack-5.3.16-0/apache2/htdocs <Directory /> Options FollowSymLinks AllowOverride None Order deny, allow deny from all </Directory> <Directory "/home/admins/lampstack-5.3.16-0/apache2/htdocs"> Options FollowSymLinks AllowOverride None Order allow, deny allow from all </Directory>

  Read the article

• PC cannot ping another PC on my home network

  - by Mike C.

  Hello, I am running Windows 7 on my PC, and I am running a Windows 2008 Server VM in Windows Virtual PC. Both machines have network connectivity. However, I cannot ping the VM from the host neither by computer name nor IP. I can ping the host machine from the VM both by computer name and IP. Is there something I need to enable on the VM to allow it to be seen by other machines on my network? Thanks!

  Read the article

• What are your favorite netcat tricks?

  - by Earlz

  What are some of your favorite tricks to do with netcat? For instance there is the popular file transmitter. What are some other things you've done with netcat?

  Read the article

• Looking for a reliable Personal VPN Service

  - by user38673

  I am looking for a reliable personal VPN service so that I can access sites like Pandora or Hulu even when I am not physically in the US. I have been using StrongVPN but their service is not reliable. Here are some of my key requirements: Fast Reliable I don't mind paying a reasonable fee Unlimited traffic I just need PPTP support US IP addresses No software installation needed Supports Mac Any recommendations? Thanks.

  Read the article

• How should I troubleshoot a problematic wireless connection on Linux?

  - by Gearoid Murphy

  I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

  Read the article

• How do I set up a bridge on Ubuntu GNOME 14.04

  - by NJRandy

  I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

  Read the article

• Can Internet data be used by malware when PC off?

  - by Val

  I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

  Read the article

• Extending a home wireless network using two routers running tomato

  - by jalperin

  I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

  Read the article

• Strange WiFi problem - network is "not connected" but works

  - by GalacticCowboy

  Background I'm using a Windows XP tablet PC connected to my home network. I do broadcast the SSID, but otherwise the wireless network is locked down as tight as I can make it - WPA2 with a strong key, MAC filtering, etc. I've had this computer for about 4 years and the router for about 6 months. Before that, the previous router was set up in the same way, and I've never had any particular problems. Problem This morning - as I type this, as a matter of fact - Windows is reporting that none of my network connections are connected. Yet somehow my Internet connectivity still works! ipconfig reports a valid IP address, domain, etc., even though Windows apparently doesn't know about it. I tried repairing the connection and it had no effect - the repair eventually timed out. I'm pretty sure that I could reboot the computer and/or the router, etc. and it would fix the problem. However, I'm more interested in knowing if any of you have ever seen anything like this, and what might have caused it? Since it works I'm not inclined to mess with it too much. My concern is that it's a precursor to bigger problems.

  Read the article

• Why do some devices seemingly need the wifi router to reboot before they can connect?

  - by CreeDorofl

  I've noticed a pattern but I'm not sure if it's a crappy router, crappy wireless device, or maybe everything is working as intended. I can wirelessly connect my office PC to the router's settings page for a day, maybe two, then afterwards I can't anymore until it's reset. Unrelated, but similar, in various places that offer free wifi, my kindle will connect fine most days, but occasionally won't unless the router is reset. After the reset, I connect ok. What's happening behind the scenes that makes a router stop allowing you to connect? Is it something on my end that's changing, or on the router's end?

  Read the article

• Servers / ram for social network- how many?

  - by Marty

  I am launching my social network soon an looking into hosting. The question i am lost is: Do i need separate servers for web vs database vs image handling since there is photo sharing? Or does 1 server handle it all? Also is more ram better? If i get 50GB ram is that better than having 8 gb ram? EDIT: It is PHP codeignitor and MySQL for now. (switch to NoSQL DB later if demand calls fr it.) I will be using memcache also. Concept wise it is similar to yelp, so geographic based with lots of user content and image sharing + live feeds an privacy levels. User plan is open question. Without testing the demand for this i cant give a number. But the concept is unique, no one out there with the set of features i am releasing so it could grow. Ideally I want to plan for handling about 1-2 million views / month from launch. If it goes more than that then I will upgrade.

  Read the article

• Disconnected from WiFi, Windows claims otherwise [closed]

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access. Is there a tool that can tell me which program, if any, is disconecting me ?

  Read the article

• Access server using IP on another interface

  - by Markos

  I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

  Read the article

• How to masked network directory with Active Directory & IIS7

  - by Zach Shallbetter

  Departments within our organization have file directories on our IIS7 2008 R2 server similar to \\apollo\marketing.oems, which are outward facing for clients. We would like to create masked directories for quicker access like \\marketing that would point to \\apollo\marketing.oems. I've done research and have not come across any real answers, although I know it's possible Any help would be appreciated.

  Read the article

• Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

  - by Benjamin Maus

  I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

  Read the article

• Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

  - by Martin Janiczek

  I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to EDIT 2: probably going to try TP-LINK TL-WR740N. It's a classic router, but can be flashed with OpenWRT, and the price beats everything else I've seen.

  Read the article

• adding a route entry to linux routing table

  - by netg

  hi, I have two systems with ip address say 64.103.56.1(A)(Dev name -wlan0) and 64.103.225.18(B),now what i want is , everytime I ping B from my system A, it has to be routed via a router say with address 10.0.0.251(C)(I want this to be my next hop to reach B) , but this router is on a different subnetwork than the two systems.How do I do this? /* Things I tried: I used 'route add -host B gw C wlan0', and got an error saying " no such process exist or no such device found". Tried ping C and traceroute and found the gw addr at my side is some 63.103.236.3(D), so added another entry route add -host C gw D wlan0, I was able to do this without any error! */

  Read the article

• Why would my mouse pointer be jerky when it can't get a signal from my router?

  - by izb

  I've got a fairly new PC but when moving the mouse across the screen, the pointer jerks as if the PC is freezing momentarily every second or so. Strangely, this only seems to happen if the signal from the wifi router is bad. If I move the PC closer to the router to get a full signal, it's fine. It also seems to affect the keyboard; Opening notepad and holding down a key shows the same momentary freezes. -- Update: It's a logitech wireless mouse, and a wired USB logitech keyboard.

  Read the article

• How do ISPs/Colocation Facilities limit bandwidth for Ethernet Drops?

  - by Kyle Brandt

  I have switch providers and have run into some problems with bandwidth limitations. I have more bandwidth then before, but there are performance issues. The router is connected to a 100mBit port, but they limit it to arbitrary settings (in software I imagine). It seems when I go above the limit, the provider starts to drop packets beyond the limit (This is what they said they do as well). Is it possible the previous provider did something like queuing packets above the this limit before dropping them? Is anyone aware of not only what can be done, but what is typical? Also, is there anything I can do on my Cisco router to help this situation? It would seem I am pretty helpless if the packets are dropped before they reach my interface (The traffic that is high is inbound to my network).

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >