Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 196/1221 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Advice for programming a lobby for a network multiplayer game?

  - by Milo

  I'm working on learning network programming. I'm working on a simple card game. The basic idea is: Players enter the lobby Players see tables Players sit at an empty seat Once they sit, they do not need any information from the lobby, they see the card table and the data about the other players and so forth. I've programmed the server portion for the game itself. The clients connect to my server object and the server then receives and sends messages; quite simple. The tricky concepts for me are: What's a good way to run many tables at the same time? What's a good way to keep the lobby consistently updated for each person in the lobby (eg: MSG_TABLE_FILLED, 22) Ideally I'd like to have 1 server exe for all of this and to have to deal with multithreading as little as possible. I'm going to use the enet library. I was thinking that each time a game session starts, I push a new Game and I map the client IPs to that table, then I just route messages from those clients to that Game. Since enet supports channels I was thinking of using 2 channels per table, one for the game messages and one for in game chat. Would something like this work? Does anyone have any advice / design ideas for a game with a lobby and many tables? Is there a usual way this is done that I'm overlooking? Any conceptual ideas or even c/c++ code examples would be very helpful. Thanks

  Read the article

• Productivity vs Security [closed]

  - by nerijus

  Really do not know is this right place to ask such a questions. But it is about programming in a different light. So, currently contracting with company witch pretends to be big corporation. Everyone is so important that all small issues like developers are ignored. Give you a sample: company VPN is configured so that if you have VPN then HTTP traffic is banned. Bearing this in mind can you imagine my workflow: Morning. Ok time to get latest source. Ups, no VPN. Let’s connect. Click-click. 3 sec. wait time. Ok getting source. Do I have emails? Ups. VPN is on, can’t check my emails. Need to wait for source to come up. Finally here it is! Ok Click-click VPN is gone. What is in my email. Someone reported a bug. Good, let’s track it down. It is in TFS already. Oh, dam, I need VPN. Click-click. Ok, there is description. Yea, I have seen this issue in stachoverflow.com. Let’s go there. Ups, no internet. Click-click. No internet. What? IPconfig… DHCP server kicked me out. Dam. Renew ip. 1..2..3. Ok internet is back. Google: site: stachoverflow.com 3 min. I have solution. Great I love stackoverflow.com. Don’t want to remember days where there was no stackoveflow.com. Ok. Copy paste this like to studio. Dam, studio is stalled, can’t reach files on TFS. Click-click. VPN is back. Get source out, paste my code. Grand. Let’s see what other comments about an issue in stackoverflow.com tells. Hmm.. There is a link. Click. Dammit! No internet. Click-click. No internet. DHCP kicked me out. Dammit. Now it is even worse: this happens 3-4 times a day. After certain amount of VPN connections open\closed my internet goes down solid. Only way to get internet back is reboot. All my browser tabs/SQL windows/studio will be gone. This happened just now when I am typing this. Back to issue I am solving right now: I am getting frustrated - I do not care about better solution for this issue. Let’s do it somehow and forget. This Click-click barrier between internet and TFS kills me… Sounds familiar? You could say there are VPN settings to change. No! This is company laptop, not allowed to do changes. I am very very lucky to have admin privileges on my machine. Most of developers don’t. So just learned to live with this frustration. It takes away 40-60 minutes daily. Tried to email company support, admins. They are too important ant too busy with something that just ignored my little man’s problem. Politely ignored. Question is: Is this normal in corporate world? (Have been in States, Canada, Germany. Never seen this.)

  Read the article

• Wireless shows up as disabled, how can I get it working?

  - by Lazer

  $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

  Read the article

• How do I add a network printer in Ubuntu 12.04?

  - by Ricky Robinson

  I know the name and the IP address of a network printer, but I can't seem to be able to search by IP address or name. Ubuntu developers love to move things around to make it difficult for users, so now with Ubuntu 12.04 I can only go on Application -> System Tools -> System Settings -> Printers, click on Network and a list of printers appears. Too bad the one I want to add isn't there. How do I do it? Here it suggests System -> Administration -> Printing, which simply doesn't exist.

  Read the article

• game multiplayer service development

  - by nomad

  I'm currently working on a multiplayer game. I've looked at a number of multiplayer services(player.io, playphone, gamespy, and others) but nothing really hits the mark. They are missing features, lack platform support or cost too much. What I'm looking for is a simple poor man's version of steam or xbox live. Not the game marketplace side of those two but the multiplayer services. User accounts, profiles, presence info, friends, game stats, invites, on/offline messaging. Basically I'm looking for a unified multiplayer platform for all my games across devices. Since I can't find what I'm planning to roll my own piece by piece. I plan to save on server resources by making most of the communication p2p. Things like game data and voice chat can be handled between peers and the server keeps track of user presence and only send updates when needed or requested. I know this runs the risk of cheating but that isn't a concern right now. I plan to run this on a Amazon ec2 micro server for development then move to a small to large instance when finished. I figure user accounts would be the simplest to start with. Users can create accounts online or using in game dialog, login/out, change profile info. The user can access this info online or in game. I will need user authentication and secure communication between server and client. I figure all info will be stored in a database but I dont know how it can be stored securely and accessed from webserver and game services. I would appreciate and links to tutorials, info or advice anyone could provide to get me started. Any programming language is fine but I plan to use c# on the server and c/c++ on devices. I would like to get started right away but I'm in no hurry to get it finished just yet. If you know of a service that already fits my requirements please let me know.

  Read the article

• Atheros AR8132 Ethernet refuses to connect after suspend

  - by Ramesh Patel

  I'm having an issue where my ethernet card (Atheros Communications Inc. AR8132 Fast Ethernet (rev c0)) refuses to recognize when a network cable is plugged in after a suspend. This is dmesg after suspending: [135897.712049] atl1c 0000:02:00.0: MAC state machine can't be idle since disabled for 10ms second [135897.743729] ADDRCONF(NETDEV_UP): eth0: link is not ready [135898.541804] ADDRCONF(NETDEV_UP): eth1: link is not ready [135900.452077] atl1c 0000:02:00.0: irq 47 for MSI/MSI-X [135900.672262] atl1c 0000:02:00.0: Error get phy ID [135900.673060] ADDRCONF(NETDEV_UP): eth0: link is not ready [135900.674140] ADDRCONF(NETDEV_UP): eth0: link is not ready [135925.604052] [135935.776051] eth1: no IPv6 routers present eth0 is the ethernet card and eth1 is the wlan card (Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)). The ethernet card uses the atl1c driver and the wlan card uses the wl driver. Sorry, should have mentioned as well, running Ubuntu 12.04 with kernel 3.2.0-25-generic.

  Read the article

• Ubuntu 10.04 LTS server update / upgrade issue

  - by user92603

  I have a starnge problem here with my Ubuntu 10.04 LTS server. When I try to update the server I got messages Err and warning, here an eg: sudo apt-get update Err http://fr.archive.ubuntu.com lucid Release.gpg W: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/lucid-security/multiverse/i18n/Translation-fr.bz2 Erreur temporaire de résolution de «*security.ubuntu.com*» but my server is connected and if I try to ping some DNS server (eg: 8.8.8.8 ) it works ! Can some one help me on that issue ?

  Read the article

• Transfer domains without disrupting local email server

  - by krosiris

  Perhaps I am thinking about this wrong, but maybe some of you guys can help me on this one. I have a client who currently has a domain from network solutions and is hosted via GoDaddy. Additionally, he his has email service with GoDaddy as well, but it seems to be forwarded to his local server at work. How can I transfer hosting accounts without disrupting email service (or at least temporarily)? Some MX info via Godaddy: A @ Points to GoDaddy Host main Points to client's home server sw Points to client's home server MX @ Points to main.example.com @ Points to smtp.secureserver @ Points to mailstore1.secureserver

  Read the article

• How do I install drivers for the Atheros AR8161 Ethernet controller?

  - by Jessica Burnett

  I have installed Ubuntu 12.04-64 bit on my Lenovo IdeaPad laptop, and the wired Ethernet (LAN) connection doesn't work. Running the lspci -vv | grep Atheros command from the terminal shows me I have the AR8161 Gigabit Ethernet controller: 02:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 08) This looks like a new product whose drivers are not built into Ubuntu. How do I install drivers to get the AR8161 working?

  Read the article

• Resetting network adapter?

  - by Quixo

  I'm running Ubuntu 12.04. I get a strong wireless signal throughout my house, and the wireless symbol in the upper-right-hand corner shows that it's connected. The problem is, occasionally I am unable to access the internet (still having a strong symbol). This happened with Windows 7, too, but running the network troubleshooter fixed it each time. It claimed to be "resetting the network adapter". So, what I need to know is: How do I replicate that process on Ubuntu? Thanks for your help!

  Read the article

• Wireless shows up as disabled, how can I get it working?

  - by Lazer

  $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

  Read the article

• How to implement lockstep model for RTS game?

  - by user11177

  In my effort to learn programming I'm trying to make a small RTS style game. I've googled and read a lot of articles and gamedev q&a's on the topic of lockstep synchronization in multiplayer RTS games, but am still having trouble wrapping my head around how to implement it in my own game. I currently have a simple server/client system. For example if player1 selects a unit and gives the command to move it, the client sends the command [move, unit, coordinates] to the server, the server runs the pathfinding function and sends [move, unit, path] to all clients which then moves the unit and run animations. So far so good, but not synchronized for clients with latency or lower/higher FPS. How can I turn this into a true lockstep system? Is the right methodology supposed to be something like the following, using the example from above: Turn 1 start gather command inputs from player1 send to the server turn number and commands end turn, increment turn number The server receives the commands, runs pathfinding and sends the paths to all clients. Next turn receive paths from server, as well as confirmation that all clients completed previous turn, otherwise pause and wait for that confirmation move units gather new inputs end turn Is that the gist of it? Should perhaps pathfinding and other game logic be done client side instead of on the server, if so why? Is there anything else I'm missing? I hope someone can break down the concept, so I understand it better.

  Read the article

• How to make ad-hoc network connection?

  - by Johan Nathaniel Soedjono

  I can't make ad-hoc from my netbook (Ubuntu 12.04). It has internet source from ethernet. I have tried making from network manager. But it always says 'Wireless Network Disconnected' and can't be detected by neither my other laptop nor my cell phone which have wifi. How can I make adhoc from it? I have already tried making a connection in Network Manager a lot of times, but it still can't connect and appear notification 'Wireless Network Disconnected'.

  Read the article

• How to share internet connection and making the client accessible over the lan

  - by Dario Silva Moran

  I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

  Read the article

• Can't connect to VPN on Ubuntu 12.04

  - by 12rad

  I'm having a lot of trouble connecting to VPN. This used to work on my machine, but i recently did an update and it's stopped working. I'm not sure what the problem is. My question is how do i debug this? I'm not able to narrow it down to a specific problem. This is what i get when i tail the syslogs. Would appreciate any help! Nov 6 23:42:52 meera NetworkManager[1137]: <info> Starting VPN service 'pptp'... Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 6132 Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' appeared; activating connections Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN plugin state changed: starting (3) Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN connection 'NAME VPN' (Connect) reply received. Nov 6 23:42:52 meera pppd[6136]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Nov 6 23:42:52 meera pppd[6136]: pppd 2.4.5 started by root, uid 0 Nov 6 23:42:52 meera chat[6139]: timeout set to 15 seconds Nov 6 23:42:52 meera chat[6139]: abort on (NO CARRIER) Nov 6 23:42:52 meera chat[6139]: abort on (NO DIALTONE) Nov 6 23:42:52 meera chat[6139]: abort on (ERROR) Nov 6 23:42:52 meera chat[6139]: abort on (NO ANSWER) Nov 6 23:42:52 meera chat[6139]: abort on (BUSY) Nov 6 23:42:52 meera chat[6139]: abort on (Username/Password Incorrect) Nov 6 23:42:52 meera chat[6139]: send (AT^M) Nov 6 23:42:52 meera pptp[6138]: nm-pptp-service-6132 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Nov 6 23:42:52 meera chat[6139]: expect (OK) Nov 6 23:42:52 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 13077). Nov 6 23:42:54 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:231]: The ppp mode is synchronous, yet no pptp --sync option is specified! Nov 6 23:43:07 meera chat[6139]: alarm Nov 6 23:43:07 meera chat[6139]: Failed Nov 6 23:43:07 meera pppd[6136]: Script chat -v -f /etc/ppp/chat-ztisp finished (pid 6139), status = 0x3 Nov 6 23:43:07 meera pppd[6136]: Connect script failed Nov 6 23:43:07 meera pppd[6136]: Waiting for 1 child processes... Nov 6 23:43:07 meera pppd[6136]: script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132, pid 6138 Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:204]: short read (-1): Input/output error Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:216]: pppd may have shutdown, see pppd log Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[callmgr_main:pptp_callmgr.c:234]: Closing connection (unhandled) Nov 6 23:43:07 meera pppd[6136]: Script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132 finished (pid 6138), status = 0x0 Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Nov 6 23:43:07 meera pppd[6136]: Exit. Nov 6 23:43:07 meera NetworkManager[1137]: <warn> VPN plugin failed: 1 Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state changed: stopped (6) Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state change reason: 0 Nov 6 23:43:07 meera NetworkManager[1137]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active.

  Read the article

• Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

  - by Josh

  As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

  Read the article

• Nice network diagram editor?

  - by Nicolas Raoul

  Writing a commercial proposal, I want to create a nice graphic showing the clients the architecture I thought of for their IT network, with servers, network connections, firewall, load-balancing, etc. For years I have been using dia, but I am tired of it because: the results are not satisfying, very few network elements are available, and each element's graphic representation is really ugly. Question: How to create nice network diagrams? If a better set of elements was available for dia, that would be a solution.

  Read the article

• Wireless not detected on an hp Pavilion g6

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• How to allow remote connections to Flask?

  - by Ilya Smagin

  Inside the system, running on virtual machine, I can access the running server at 127.0.0.1:5000. Although the 'remote' address of the vm is 192.168.56.101 (ping and ssh work fine), I cannot access the server with 192.168.50.101:5000 neither from the virtual machine nor from the local one. I guess there's something preventing remote connections. Here's /etc/network/interfaces: auto eth1 iface eth1 inet static address 192.168.56.101 netmask 255.255.255.0 ufw is inactive. How do I fix this problem?

  Read the article

• Unable to set default gateway

  - by GrandMasterFlush

  I'm running Ubuntu server via Hyper-V and have successfully installed it but seem unable to ping the server or ping any other machines on the network from the server. After doing a bit of reading I've noticed that the default gateway isn't set but when I try and set it I keep getting error messages which I can't understand. From this article I've tried ip route add default via 10.0.10.200 Which reports: RTNETLINK answers: Operation not permitted If I try running it prefixed with sudo but it reports: `RNETLINK answers: No such process I've editted /etc/network/interfaces but when I start the machine and type netstat -nr there is nothing listed. Can anyone tell me where I'm going wrong please? EDIT : /etc/network/interfaces contains: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

  Read the article

• Sharing internet to Ubuntu 12.04 VMWare guest

  - by John Cogan

  Got the 12.04 distro and installed this on my Mac VMWare Fusion (Version 4.1.2). Install went fine and Ubuntu seemed to update itself during the install. Rebooted and now I cannot get Ubuntu to access the internet via my Macs Ethernet connection (Connected to a router) Have tried settings the VMWare network adaptor to NAT or bridged and Host only without success. In Ubuntu I have the eth0 set to Automatic DHCP. VMWare tools is installed as well. I know next to nothing about what to do here and net searches on both Stackoverflow and Superuser sites are producing not results for me. Could someone please help? What to eventually have Ubuntu run in the background as a development web server running Zend Framework and CE Server edition but need thew internet access to run updates etc on Ubuntu. Any help would be really appreciated. TIA John

  Read the article

• Slowing down cpu speed

  - by New linux user

  How to slow down my laptop cpu so that it does not overheat?

  Read the article

• Best way to cache apt downloads on a LAN?

  - by Ken Simon

  I have multiple Ubuntu machines at home and a pretty slow internet connection, and sometimes multiple machines need to be updated at once (especially during new Ubuntu releases.) Is there a way where only one of my machines needs to download the packages, and the other machines can use the first machine to get the debs? Does it involve setting up my own local mirror? Or a proxy server? Or can it be made simpler?

  Read the article

• Can't load some domain

  - by Grzegorz

  I can't load some domain on my ubuntu 13.04: youtube.com translate.google.com drive.google.com vk.com When I ping them they are responding: PING youtube.com (217.119.79.59) 56(84) bytes of data. 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=1 ttl=59 time=21.9 ms 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=2 ttl=59 time=20.5 ms 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=3 ttl=59 time=21.3 ms --- youtube.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms rtt min/avg/max/mdev = 20.544/21.255/21.914/0.560 ms But they don't load in any browser like firefox, chrome, lynx. They load in my media centre on XBMCbuntu.

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >