Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 201/444 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• Dir and Findstr commands taking a long time to complete in Batch File

  - by user2405934

  dir %DRIVE_NAME%: /S /C /A-D /Q /T:C | findstr ".zip$ .doc$ .xls$ .xpt$ .cpt$ .cpo$ .xlsx$ .pdf$ .dat$ .txt$ .docx$ .csv$" >> file.info I am using above command to list all information in file, as below: 03/27/2013 01:02 PM 86,280 uusr\fr02 h123_frf67_rk_20140327.txt 03/27/2013 01:02 PM 5,513 usr\fr02 h123_frf67_rk_20140328.txt %DRIVE_NAME%: is mapped drive. Folders will be the same; not more than 100 folders and their sub-folders, and there will only be 2 or 3 files at time in any one of the folders. Now the issues is that for one folder it works perfect, but for 80 to 90 folders it is taking too much time. I think it's because of findstr and the different extensions used. Is there any way to make it faster?

  Read the article

• Missing Right Click Menu Text After Sleep

  - by petebob796

  I have a laptop running Windows 7 and regularly close the lid to put it in sleep mode. Recently after resuming from sleep if I go to access the right click menu in the windows shell when I hover over the menu items the text disappears and doesn't re-appear without closing the menu and right clicking again. The only way to fix this is to restart. Any ideas what could be causing this? I have an nvidia 8600m gs graphics card which had a BSOD problem a while back at boot up but since I underclocked it slightly it has been running fine and I experience no other issues but this. This only affects right click menus that are part of the windows so not any programs right click menu. It's not a major problem just strange and a little annoying.

  Read the article

• reinstalling vista product key

  - by Arabella

  I recently formatted my laptop which came with Vista preinstalled and installed Windows 7 on the primary partition. I've now installed Vista on a different partition, but it won't activate my valid product key. I've looked around on here and have seen similar issues being raised, but I don't have the telephonic activation option (only option I have is online activation). I am located in South Africa. When I enter my product key from my sticker it says it is not valid, so I must either try to activate online again or buy a different product key. I have reinstalled Vista on the primary partition several times and activated the key without a problem. This is the first time I am installing it on a different partition.

  Read the article

• XP Install Driver Notification for AirCard

  - by Brian

  Hello, A co-worker of mine is using an air-card; it prompted him to install software in the notification tray; he clicked on the wrong thing and the icon went away without him installing that software. How can I get that icon back? He can't install the software then... I know that you can download the software from the site, but we did that and were having issues from that too, was hoping to be able to install the sofware on the air card... Restarting and trying again doesn't pop up the notification too. Thanks.

  Read the article

• Laptop loses signal from WiFi router, but mobile phone holds it fine

  - by Anton

  I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

  Read the article

• WSUS Showing Incorrect Version & Client Update Failure but they can check-in

  - by user132199

  One of the issues we are having is the clients will not download the updates from our WSUS server. They check-in as they are suppose too and find applicable updates but they are unable to actually download and install them. The GPO is set correctly. We decided to install the patch KB2720211to see if it would help eleviate this issue but it did not. In fact, even stranger, if I check the version that is installed on WSUS it reads 3.2.7600.226 but as far as I know it should read 3.2.7600.251. If I check Add/Remove programs to see what Windows Updates have been installed it even lists for WSUS that KB2720211 has been installed at version 3.2.7600.251. To install this update I followed the following directions Question: Has anyone seen this issue where the patch is installed yet not showing the correct version? What can I try to get my clients to update?

  Read the article

• SSH reverse tunnel to monitor and manage remote devices

  - by acid_crucifix

  I have a set a distributed set of devices running Ubuntu 12.04 that I am distributing to clients. I would like to manage them remotely. They may not have fixed IPs and potentially might be behind firewalls. What I am planning to do is have the devices (permanently connected to the net) poll a request URL and based on the response open a reverse tunnel to my server, so that I can access them via that tunnel. Most of what I read about reverse tunnel over SSH is for single use cases and very little about heavy production usage. Is there some reason for this, security issues? or stability? Any help would be much obliged.

  Read the article

• suddenly can't connect to windows 7 pc from xbmc

  - by Damon

  I have xbmc installed on a softmodded classic xbox and all of a sudden I cannot connect to the shared folders on my windows 7 PC. Well, it can connect but it wants a username and password, but none exist on my computer. It's been several weeks since I last used it, but it was working fine then! and no particular changes I can think of aside from I guess a few windows updates. I've seen reference online to windows live essentials causing issues with file sharing, but I don't even have that installed. And I made sure to tick 'turn off password protected sharing' in my advanced network setup. I had the guest account turned off and working fine before, and tried turning it on but no luck. I can access my shared folders fine from other Computers and a ps3. I've read a couple threads of similar situations on various folders and none of their solutions have worked.

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• SoX on Windows 7 64-Bit Outfile Missing

  - by Christian

  I have come across the strangest problem when trying to run sox.exe on my Windows 7 installation. Whenever I try and record audio it works without any issues but it will not output an audio file. The crazy thing is that when I use the play command it successfully plays what I just recorded. Has anyone ever heard of this happening? Here are the commands (and output) that I'm using: C:\Program Files (x86)\Vox\sox-14-4-0>sox -d test.wav trim 0 00:05 Input File : 'default' (waveaudio) Channels : 2 Sample Rate : 48000 Precision : 16-bit Sample Encoding: 16-bit Signed Integer PCM In:0.00% 00:00:05.03 [00:00:00.00] Out:240k [ | ] Clip:0 Done. C:\Program Files (x86)\Vox\sox-14-4-0>play test.wav test.wav: File Size: 960k Bit Rate: 1.54M Encoding: Signed PCM Channels: 2 @ 16-bit Samplerate: 48000Hz Replaygain: off Duration: 00:00:05.00 In:100% 00:00:05.00 [00:00:00.00] Out:240k [ | ] Clip:0 Done. Am I losing my mind or is something up here?

  Read the article

• Active Directory Profile Slows down machine

  - by boburob

  I have a strange issue with an Active Directory profile. When the user logs onto a machine with his profile, the whole machine becomes incredibly slow and unresponsive, with programs hanging and taking an age to load everything. If I log into the same machine with any other profile nothing happens. I took a look at his original profile, any start up programs, login scripts, etc and could not see what could be causing this. The machine is not running out of memory or CPU. Nothing strange is appearing in the event log and I can see nothing running under his profile which may cause this. So I created the user a new profile to test this on and exactly the same thing happens on the first login. The only thing which would of been carried across is the security groups the user is assigned to, yet I have other users with the same groups who do not experience these issues so I am now at a complete loss on where to go next!

  Read the article

• Multi-Document TOC showing in wrong order

  - by Jeremy DeStefano

  I had a large document that was having formatting issues, so I split it into 2 files. Chapters 1-7 are in the main doc with the TOC and a second doc has chapters 8-12. I have the following: {TOC \O "1-3" \H \Z \U} {RD \f "MCDPS Training Manual Part2.docx"} The TOC is created and has entries from both documents, however its showing the entries from Chapter 8-11 first and then Chapter 1-7. I've read that it should list them based on page numbers, but its not. Chapter 8 starts at page 121, yet its listing it first. How can I get it to show the TOC from the main doc first and then the RD?

  Read the article

• Dell Inspirion 1525 64bit driver compatibility

  - by Tony

  Hello, Can anyone tell me what the compatibility of drivers on 64bit vista are like on the Dell Inspiron 1525. Mine is just a year old now and I want to upgrade to 64bit vista. I wondered if there's known issues with drivers that I should be aware of before upgrading? Tony PS: is the upgrade worth it? My machine has 3GB of RAM and runs a T5800 2.0GHz DuoCore Processor. I use Visual Studio often and have loads of things open at the same time a lot. That's why I'm considering an upgrade.

  Read the article

• Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

  - by retailevolved

  I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

  Read the article

• Inexpensive degaussers or HDD shredders?

  - by Nicholas Knight

  I do a lot of work for a small cash-strapped business that has a lot of active hard drives, most are consumer-grade SATA of about five years of age, and predictably they are dying at an increasing rate, and a lot of the time they can't even be detected, let alone complete a zero-out cycle. Right now those drives are just being stored, but that can't continue forever. We've got a couple bad LTO tapes it'd be nice to deal with, too. There are very real security and legal issues that make dropping them off with someone who claims they'll be properly destroyed a gamble. I've looked around at degaussers and HDD shredders, and the ones that don't look like they come from some guy in his basement all seem to be $3000+, which is hard to swallow right now. Is there anything out there in the $500-1500 range that you would recommend? (Speed isn't a big issue, if it takes several minutes or even hours per drive, that's completely OK, we've only got 10 or so thus far.)

  Read the article

• What version of Ubuntu to use for Desktop with 8Gb RAM?

  - by Alexander

  This may sound as a stupid question, but I am really interested whether Ubuntu Desktop i386 will be able to use all my available RAM. I want to use the latest, non-LTS version, 10.10. It says on the website that it's (i386) the Recommended version. I also recall that Flash Player had issues with 64 bit Linux. Also, the 64 bit version is listed in the Universal USB Installer as amd64. Does this mean that it's using instruction sets specific to AMD CPUs? (I have an Intel) Will it work fine with Intel? So which one to download and install? What to do to be able to use 8Gb of RAM?

  Read the article

• MS Windows issue - "Filename or extension is too long"

  - by Daniel

  I run Microsoft windows on a few of my machines. I don't know if many people know about this issue in the OS but you can't have very long filenames, from what I know Linux can have longer names, I have never run into this issue on my Linux machines. Anyway I run into issues whenever copying folders & files to backup drives. I manually backup of my data, finding and changing names of files, this is very very tedious. Is there a software tool to shorten folders or filenames that are found to be to long on Windows? I have drive image duplication software which does the job but in a way that I don't like, plus moving files can become a hassle at times if the names are too long to copy.

  Read the article

• Flash Media Server slow over SSL

  - by Antilogic

  We are using FMS to host a VoD site. We host FMS internally (we do not use a CDN). We recently installed an SSL certificate to alleviate connection issues for clients (they're networks either block or don't support RTMP), however we're noticing that when streaming in RTMPS connections are drastically slower (on the order of Mbps). I know SSL causes some amount of over head but both client and server show almost no signs of exertion. Speedtest.net and a locally hosted speed test confirm that bandwidth is not an issue. I'm really not a network guru, so I'm at a loss as to where to check next. Do any of you have an idea why streaming media would run so slow over SSL?

  Read the article

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• Windows 7 login automically puts "IIIII....." in password, so it is impossible for me to login?

  - by xaisoft

  I have no idea why this is happening. I have ran multiple malware programs, I have run anti-virus programs, I even restored to an early point in time. The keyboard letter "I" doesn't appear to be stuck, I am using an external keyboard by the way. When I reboot the computer and get to the login screen, when I press ctrl-alt-del to login, it the password textbox starts putting "IIIIIIIIIIII......", it only stops when I bang on the keyboard. I also noticed at one point that my caps lock on turned caps off and caps lock off turned caps on and some other weird behavior. I have tried search online for similar issues, but no luck.

  Read the article

• Do I need to retain Sharepoint usage analysis log files

  - by dunxd

  Our Sharepoint installation currently has 30Gb of Usage Analysis Log file - these date back about six months. I have configured Sharepoint to do Usage Analysis Processing every night, so I am wondering whether I need to keep these files for so long. Sharepoint doesn't seem to clean up these files automatically - I think six months ago I had to clear out logs due to disk space issues. So my question is, do I need to retain these files in order to get decent usage analysis reports, or can I delete them as soon as the usage analysis processing has completed?

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• Optimal way to make MySQL backups for fairly large databases (MyISAM / InnoDB)

  - by WinkyWolly

  Currently we have one beefy MySQL database that runs a couple of high traffic Django based websites as well as some e-commerce websites of decent size. As a result we have a fair amount of large databases using both InnoDB and MyISAM tables. Unfortunately we've recently hit a wall due to the amount of traffic so I've setup another master server to help alleviate reads / backups. Now at the moment I simply use mysqldump with a few arguments and it's proven to be fine.. until now. Obviously mysqldump is a slow quick method however I believe we've outgrown its use. I now need a good alternative and have been looking into utilizing Maatkits mk-parallel-dump utility or an LVM snapshot solution. Succinct short version: I have a fairly large MySQL databases I need to backup Current method using mysqldump is inefficient and slow (causing issues) Looking into something such as mk-parallel-dump or LVM snapshots Any recommendations or ideas would be appreciated - since I have to re-do how we're doing things I rather have it done properly / most efficient :).

  Read the article

• How can I control wireless networks in Ubuntu without Network-Manager?

  - by Solignis

  Hi there, I recently installed Ubuntu on a laptop I got. I was having issues with the network manager just like I was having in my VM where it was not setting up the hostname correctly. Anyhow now I have a problem, since it is a laptop it will be moving.... But I have no way to discover new wireless networks. Anyway I can gain that functionality back? The problem I am running into is that I need to set the DNS search and domain for the machine so I can access my network but the network-manager was overriding the settings. Any help would be much appreciated.

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >