ad cs - Page 204 - Developer IT

Local dns for testing websites using mobile devices

- by Morpheu5

Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

Read the article

Synergy 1.5 crash (OSX 10.6.8)

- by Oliver

THANKS FOR TAKING THE TIME TO READ THIS I recently installed Synergy 1.5 r2278 (for Mac OSX 10.6.8) and was using it fine for most of the day, then it decided to stop working (the only thing I changed systemwise was the screensaver - and then after it started crashing disabled it - to see if it would resolve). When I start Synergy (on the Mac - Client) it says: after about 5 seconds (and successfully connecting to the Server) "synergyc quit unexpectedly" Here is the crash log (w/ binery info removed - too long for post requirements) Process: synergyc [1026] Path: /Applications/Synergy.app/Contents/MacOS/synergyc Identifier: synergy Version: ??? (???) Code Type: X86 (Native) Parent Process: Synergy [1023] Date/Time: 2014-05-28 15:36:17.746 +0930 OS Version: Mac OS X 10.6.8 (10K549) Report Version: 6 Interval Since Last Report: 2144189 sec Crashes Since Last Report: 23 Per-App Interval Since Last Report: 10242 sec Per-App Crashes Since Last Report: 9 Anonymous UUID: 86D5A57C-13D4-470E-AC72-48ACDDDE5EB0 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 5 Application Specific Information: abort() called Thread 0: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x95cf3afa mach_msg_trap + 10 1 libSystem.B.dylib 0x95cf4267 mach_msg + 68 2 com.apple.CoreFoundation 0x95af02df __CFRunLoopRun + 2079 3 com.apple.CoreFoundation 0x95aef3c4 CFRunLoopRunSpecific + 452 4 com.apple.CoreFoundation 0x95aef1f1 CFRunLoopRunInMode + 97 5 com.apple.HIToolbox 0x93654e04 RunCurrentEventLoopInMode + 392 6 com.apple.HIToolbox 0x93654bb9 ReceiveNextEventCommon + 354 7 com.apple.HIToolbox 0x937dd137 ReceiveNextEvent + 83 8 synergyc 0x000356d0 COSXEventQueueBuffer::waitForEvent(double) + 48 9 synergyc 0x00010dd5 CEventQueue::getEvent(CEvent&, double) + 325 10 synergyc 0x00011fb0 CEventQueue::loop() + 272 11 synergyc 0x00044eb6 CClientApp::mainLoop() + 134 12 synergyc 0x0005c509 standardStartupStatic(int, char**) + 41 13 synergyc 0x000448a9 CClientApp::runInner(int, char**, ILogOutputter*, int (*)(int, char**)) + 137 14 synergyc 0x0005c4b0 CAppUtilUnix::run(int, char**) + 64 15 synergyc 0x000427df CApp::run(int, char**) + 63 16 synergyc 0x00006e65 main + 117 17 synergyc 0x00006dd9 start + 53 Thread 1: 0 libSystem.B.dylib 0x95d607da __sigwait + 10 1 libSystem.B.dylib 0x95d607b6 sigwait$UNIX2003 + 71 2 synergyc 0x00009583 CArchMultithreadPosix::threadSignalHandler(void*) + 67 3 libSystem.B.dylib 0x95d21259 _pthread_start + 345 4 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 2: 0 libSystem.B.dylib 0x95d21aa2 __semwait_signal + 10 1 libSystem.B.dylib 0x95d2175e _pthread_cond_wait + 1191 2 libSystem.B.dylib 0x95d212b1 pthread_cond_timedwait$UNIX2003 + 72 3 synergyc 0x00009476 CArchMultithreadPosix::waitCondVar(CArchCondImpl*, CArchMutexImpl*, double) + 150 4 synergyc 0x0002b18f CCondVarBase::wait(double) const + 63 5 synergyc 0x0002ce68 CSocketMultiplexer::serviceThread(void*) + 136 6 synergyc 0x0002d698 TMethodJob<CSocketMultiplexer>::run() + 40 7 synergyc 0x0002b8f4 CThread::threadFunc(void*) + 132 8 synergyc 0x00008f30 CArchMultithreadPosix::doThreadFunc(CArchThreadImpl*) + 80 9 synergyc 0x0000902a CArchMultithreadPosix::threadFunc(void*) + 74 10 libSystem.B.dylib 0x95d21259 _pthread_start + 345 11 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 3: Dispatch queue: com.apple.libdispatch-manager 0 libSystem.B.dylib 0x95d1a382 kevent + 10 1 libSystem.B.dylib 0x95d1aa9c _dispatch_mgr_invoke + 215 2 libSystem.B.dylib 0x95d19f59 _dispatch_queue_invoke + 163 3 libSystem.B.dylib 0x95d19cfe _dispatch_worker_thread2 + 240 4 libSystem.B.dylib 0x95d19781 _pthread_wqthread + 390 5 libSystem.B.dylib 0x95d195c6 start_wqthread + 30 Thread 4: 0 libSystem.B.dylib 0x95d19412 __workq_kernreturn + 10 1 libSystem.B.dylib 0x95d199a8 _pthread_wqthread + 941 2 libSystem.B.dylib 0x95d195c6 start_wqthread + 30 Thread 5 Crashed: 0 libSystem.B.dylib 0x95d610ee __semwait_signal_nocancel + 10 1 libSystem.B.dylib 0x95d60fd2 nanosleep$NOCANCEL$UNIX2003 + 166 2 libSystem.B.dylib 0x95ddbfb2 usleep$NOCANCEL$UNIX2003 + 61 3 libSystem.B.dylib 0x95dfd6f0 abort + 105 4 libSystem.B.dylib 0x95d79b1b _Unwind_Resume + 59 5 synergyc 0x00008fd1 CArchMultithreadPosix::doThreadFunc(CArchThreadImpl*) + 241 6 synergyc 0x0000902a CArchMultithreadPosix::threadFunc(void*) + 74 7 libSystem.B.dylib 0x95d21259 _pthread_start + 345 8 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 5 crashed with X86 Thread State (32-bit): eax: 0x0000003c ebx: 0x95d60f39 ecx: 0xb0288a7c edx: 0x95d610ee edi: 0x00521950 esi: 0xb0288ad8 ebp: 0xb0288ab8 esp: 0xb0288a7c ss: 0x0000001f efl: 0x00000247 eip: 0x95d610ee cs: 0x00000007 ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037 cr2: 0x002fe000 Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB

Read the article

WCF AuthenticationService in IIS7 Error

- by germandb

I have a WCF Server running on IIS 7 using default application pool, with SSL activate, the services is installed in a SBS Server 2008. I implement client application services with wcf and SQL 2005 for setting the access control in my application. The application run under windows vista and is make with WPF. In my developer machine the application and the WCF services run well, the IIS i'm use for the trials is the local IIS 7 and the database is the SQL Server 2005 database hosting in my server. I'm using Visual Studio Project Designer to enable and configure client application services. using https://localhost/WcfServidorFundacion. When i'm change the authentication services location to https://WcfServices:5659/WcfServidorFundacion and recompile the application, the following error show up. Message: The web service returned the error status code: InternalServerError. Details of service failure: {"Message":" Error while processing your request ","StackTrace":"","ExceptionType":""} Stack Trace: en System.Net.HttpWebRequest.GetResponse() en System.Web.ClientServices.Providers.ProxyHelper.CreateWebRequestAndGetResponse(String serverUri, CookieContainer& cookies, String username, String connectionString, String connectionStringProvider, String[] paramNames, Object[] paramValues, Type returnType) InnerException: System.Net.WebException Message="Remote Server Error: (500) Interal Server Error." I can access the WCF service from the navigator using the url mentioned above and even make a webReference in my project. I make a capture of the response but I'cant post it because i don't have 10 reputation points I activate the error log in the IIS 7 server, and the result is a Warning in the ManagedPipilineHandler. I appreciate if any one can help me Errors & Warnings No.? Severity Event Module Name 132. view trace Warning -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName ManagedPipelineHandler Notification 128 HttpStatus 500 HttpReason Internal Server Error HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode La operación se ha completado correctamente. (0x0) Maybe this can help, is the web.config of my service <?xml version="1.0" encoding="utf-8"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings /> <connectionStrings> <remove name="LocalMySqlServer" /> <remove name="LocalSqlServer" /> <add name="fundacionSelfAut" connectionString="Data Source=FUNDACIONSERVER/PRUEBAS;Initial Catalog=fundacion;User ID=wcfBaseDatos;Password=qwerty_2009;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <profile enabled="true" defaultProvider="SqlProfileProvider"> <providers> <clear /> <add name="SqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> <properties> <add name="FirstName" type="String" /> <add name="LastName" type="String" /> <add name="PhoneNumber" type="String" /> </properties> </profile> <roleManager enabled="true" defaultProvider="SqlRoleProvider"> <providers> <clear /> <add name="SqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> </roleManager> <membership defaultProvider="SqlMembershipProvider"> <providers> <clear /> <add name="SqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="true" requiresUniqueEmail="true" passwordFormat="Hashed" /> </providers> </membership> <authentication mode="Forms" /> <compilation debug="true" strict="false" explicit="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </assemblies> </compilation>   <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <sessionState timeout="40" /> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> <tracing> <traceFailedRequests> <add path="*"> <traceAreas> <add provider="ASP" verbosity="Verbose" /> <add provider="ASPNET" areas="Infrastructure,Module,Page,AppServices" verbosity="Verbose" /> <add provider="ISAPI Extension" verbosity="Verbose" /> <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module" verbosity="Verbose" /> </traceAreas> <failureDefinitions statusCodes="401.3,500,403,404,405" /> </add> </traceFailedRequests> </tracing> <security> <authorization> <add accessType="Allow" users="germanbarbosa,informatica" /> </authorization> <authentication> <windowsAuthentication enabled="false" /> </authentication> </security> </system.webServer> <system.web.extensions> <scripting> <webServices> <authenticationService enabled="true" requireSSL="true" /> <profileService enabled="true" readAccessProperties="FirstName,LastName,PhoneNumber" /> <roleService enabled="true" /> </webServices> </scripting> </system.web.extensions> <system.serviceModel> <services>  <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.AuthenticationService"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.AuthenticationService" /> </service>  <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.RoleService"> <endpoint binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.RoleService" /> </service>  <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.ProfileService"> <endpoint binding="basicHttpBinding" bindingNamespace="http://asp.net/ApplicationServices/v200" bindingConfiguration="userHttps" contract="System.Web.ApplicationServices.ProfileService" /> </service> </services> <bindings> <basicHttpBinding>  <binding name="userHttps"> <security mode="Transport"> </security> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="AppServiceBehaviors"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseAspNetRoles" roleProviderName="SqlRoleProvider" /> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="MembershipProvider" membershipProviderName="SqlMembershipProvider" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> </system.serviceModel> </configuration>

Read the article

fatal error C1014: too many include files : depth = 1024

- by numerical25

I have no idea what this means. But here is the code that it supposely is happening in. //======================================================================================= // d3dApp.cpp by Frank Luna (C) 2008 All Rights Reserved. //======================================================================================= #include "d3dApp.h" #include <stream> LRESULT CALLBACK MainWndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static D3DApp* app = 0; switch( msg ) { case WM_CREATE: { // Get the 'this' pointer we passed to CreateWindow via the lpParam parameter. CREATESTRUCT* cs = (CREATESTRUCT*)lParam; app = (D3DApp*)cs->lpCreateParams; return 0; } } // Don't start processing messages until after WM_CREATE. if( app ) return app->msgProc(msg, wParam, lParam); else return DefWindowProc(hwnd, msg, wParam, lParam); } D3DApp::D3DApp(HINSTANCE hInstance) { mhAppInst = hInstance; mhMainWnd = 0; mAppPaused = false; mMinimized = false; mMaximized = false; mResizing = false; mFrameStats = L""; md3dDevice = 0; mSwapChain = 0; mDepthStencilBuffer = 0; mRenderTargetView = 0; mDepthStencilView = 0; mFont = 0; mMainWndCaption = L"D3D10 Application"; md3dDriverType = D3D10_DRIVER_TYPE_HARDWARE; mClearColor = D3DXCOLOR(0.0f, 0.0f, 1.0f, 1.0f); mClientWidth = 800; mClientHeight = 600; } D3DApp::~D3DApp() { ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mSwapChain); ReleaseCOM(mDepthStencilBuffer); ReleaseCOM(md3dDevice); ReleaseCOM(mFont); } HINSTANCE D3DApp::getAppInst() { return mhAppInst; } HWND D3DApp::getMainWnd() { return mhMainWnd; } int D3DApp::run() { MSG msg = {0}; mTimer.reset(); while(msg.message != WM_QUIT) { // If there are Window messages then process them. if(PeekMessage( &msg, 0, 0, 0, PM_REMOVE )) { TranslateMessage( &msg ); DispatchMessage( &msg ); } // Otherwise, do animation/game stuff. else { mTimer.tick(); if( !mAppPaused ) updateScene(mTimer.getDeltaTime()); else Sleep(50); drawScene(); } } return (int)msg.wParam; } void D3DApp::initApp() { initMainWindow(); initDirect3D(); D3DX10_FONT_DESC fontDesc; fontDesc.Height = 24; fontDesc.Width = 0; fontDesc.Weight = 0; fontDesc.MipLevels = 1; fontDesc.Italic = false; fontDesc.CharSet = DEFAULT_CHARSET; fontDesc.OutputPrecision = OUT_DEFAULT_PRECIS; fontDesc.Quality = DEFAULT_QUALITY; fontDesc.PitchAndFamily = DEFAULT_PITCH | FF_DONTCARE; wcscpy(fontDesc.FaceName, L"Times New Roman"); D3DX10CreateFontIndirect(md3dDevice, &fontDesc, &mFont); } void D3DApp::onResize() { // Release the old views, as they hold references to the buffers we // will be destroying. Also release the old depth/stencil buffer. ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mDepthStencilBuffer); // Resize the swap chain and recreate the render target view. HR(mSwapChain->ResizeBuffers(1, mClientWidth, mClientHeight, DXGI_FORMAT_R8G8B8A8_UNORM, 0)); ID3D10Texture2D* backBuffer; HR(mSwapChain->GetBuffer(0, __uuidof(ID3D10Texture2D), reinterpret_cast<void**>(&backBuffer))); HR(md3dDevice->CreateRenderTargetView(backBuffer, 0, &mRenderTargetView)); ReleaseCOM(backBuffer); // Create the depth/stencil buffer and view. D3D10_TEXTURE2D_DESC depthStencilDesc; depthStencilDesc.Width = mClientWidth; depthStencilDesc.Height = mClientHeight; depthStencilDesc.MipLevels = 1; depthStencilDesc.ArraySize = 1; depthStencilDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT; depthStencilDesc.SampleDesc.Count = 1; // multisampling must match depthStencilDesc.SampleDesc.Quality = 0; // swap chain values. depthStencilDesc.Usage = D3D10_USAGE_DEFAULT; depthStencilDesc.BindFlags = D3D10_BIND_DEPTH_STENCIL; depthStencilDesc.CPUAccessFlags = 0; depthStencilDesc.MiscFlags = 0; HR(md3dDevice->CreateTexture2D(&depthStencilDesc, 0, &mDepthStencilBuffer)); HR(md3dDevice->CreateDepthStencilView(mDepthStencilBuffer, 0, &mDepthStencilView)); // Bind the render target view and depth/stencil view to the pipeline. md3dDevice->OMSetRenderTargets(1, &mRenderTargetView, mDepthStencilView); // Set the viewport transform. D3D10_VIEWPORT vp; vp.TopLeftX = 0; vp.TopLeftY = 0; vp.Width = mClientWidth; vp.Height = mClientHeight; vp.MinDepth = 0.0f; vp.MaxDepth = 1.0f; md3dDevice->RSSetViewports(1, &vp); } void D3DApp::updateScene(float dt) { // Code computes the average frames per second, and also the // average time it takes to render one frame. static int frameCnt = 0; static float t_base = 0.0f; frameCnt++; // Compute averages over one second period. if( (mTimer.getGameTime() - t_base) >= 1.0f ) { float fps = (float)frameCnt; // fps = frameCnt / 1 float mspf = 1000.0f / fps; std::wostringstream outs; outs.precision(6); outs << L"FPS: " << fps << L"\n" << "Milliseconds: Per Frame: " << mspf; mFrameStats = outs.str(); // Reset for next average. frameCnt = 0; t_base += 1.0f; } } void D3DApp::drawScene() { md3dDevice->ClearRenderTargetView(mRenderTargetView, mClearColor); md3dDevice->ClearDepthStencilView(mDepthStencilView, D3D10_CLEAR_DEPTH|D3D10_CLEAR_STENCIL, 1.0f, 0); } LRESULT D3DApp::msgProc(UINT msg, WPARAM wParam, LPARAM lParam) { switch( msg ) { // WM_ACTIVATE is sent when the window is activated or deactivated. // We pause the game when the window is deactivated and unpause it // when it becomes active. case WM_ACTIVATE: if( LOWORD(wParam) == WA_INACTIVE ) { mAppPaused = true; mTimer.stop(); } else { mAppPaused = false; mTimer.start(); } return 0; // WM_SIZE is sent when the user resizes the window. case WM_SIZE: // Save the new client area dimensions. mClientWidth = LOWORD(lParam); mClientHeight = HIWORD(lParam); if( md3dDevice ) { if( wParam == SIZE_MINIMIZED ) { mAppPaused = true; mMinimized = true; mMaximized = false; } else if( wParam == SIZE_MAXIMIZED ) { mAppPaused = false; mMinimized = false; mMaximized = true; onResize(); } else if( wParam == SIZE_RESTORED ) { // Restoring from minimized state? if( mMinimized ) { mAppPaused = false; mMinimized = false; onResize(); } // Restoring from maximized state? else if( mMaximized ) { mAppPaused = false; mMaximized = false; onResize(); } else if( mResizing ) { // If user is dragging the resize bars, we do not resize // the buffers here because as the user continuously // drags the resize bars, a stream of WM_SIZE messages are // sent to the window, and it would be pointless (and slow) // to resize for each WM_SIZE message received from dragging // the resize bars. So instead, we reset after the user is // done resizing the window and releases the resize bars, which // sends a WM_EXITSIZEMOVE message. } else // API call such as SetWindowPos or mSwapChain->SetFullscreenState. { onResize(); } } } return 0; // WM_EXITSIZEMOVE is sent when the user grabs the resize bars. case WM_ENTERSIZEMOVE: mAppPaused = true; mResizing = true; mTimer.stop(); return 0; // WM_EXITSIZEMOVE is sent when the user releases the resize bars. // Here we reset everything based on the new window dimensions. case WM_EXITSIZEMOVE: mAppPaused = false; mResizing = false; mTimer.start(); onResize(); return 0; // WM_DESTROY is sent when the window is being destroyed. case WM_DESTROY: PostQuitMessage(0); return 0; // The WM_MENUCHAR message is sent when a menu is active and the user presses // a key that does not correspond to any mnemonic or accelerator key. case WM_MENUCHAR: // Don't beep when we alt-enter. return MAKELRESULT(0, MNC_CLOSE); // Catch this message so to prevent the window from becoming too small. case WM_GETMINMAXINFO: ((MINMAXINFO*)lParam)->ptMinTrackSize.x = 200; ((MINMAXINFO*)lParam)->ptMinTrackSize.y = 200; return 0; } return DefWindowProc(mhMainWnd, msg, wParam, lParam); } void D3DApp::initMainWindow() { WNDCLASS wc; wc.style = CS_HREDRAW | CS_VREDRAW; wc.lpfnWndProc = MainWndProc; wc.cbClsExtra = 0; wc.cbWndExtra = 0; wc.hInstance = mhAppInst; wc.hIcon = LoadIcon(0, IDI_APPLICATION); wc.hCursor = LoadCursor(0, IDC_ARROW); wc.hbrBackground = (HBRUSH)GetStockObject(NULL_BRUSH); wc.lpszMenuName = 0; wc.lpszClassName = L"D3DWndClassName"; if( !RegisterClass(&wc) ) { MessageBox(0, L"RegisterClass FAILED", 0, 0); PostQuitMessage(0); } // Compute window rectangle dimensions based on requested client area dimensions. RECT R = { 0, 0, mClientWidth, mClientHeight }; AdjustWindowRect(&R, WS_OVERLAPPEDWINDOW, false); int width = R.right - R.left; int height = R.bottom - R.top; mhMainWnd = CreateWindow(L"D3DWndClassName", mMainWndCaption.c_str(), WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, width, height, 0, 0, mhAppInst, this); if( !mhMainWnd ) { MessageBox(0, L"CreateWindow FAILED", 0, 0); PostQuitMessage(0); } ShowWindow(mhMainWnd, SW_SHOW); UpdateWindow(mhMainWnd); } void D3DApp::initDirect3D() { // Fill out a DXGI_SWAP_CHAIN_DESC to describe our swap chain. DXGI_SWAP_CHAIN_DESC sd; sd.BufferDesc.Width = mClientWidth; sd.BufferDesc.Height = mClientHeight; sd.BufferDesc.RefreshRate.Numerator = 60; sd.BufferDesc.RefreshRate.Denominator = 1; sd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; sd.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED; sd.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED; // No multisampling. sd.SampleDesc.Count = 1; sd.SampleDesc.Quality = 0; sd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; sd.BufferCount = 1; sd.OutputWindow = mhMainWnd; sd.Windowed = true; sd.SwapEffect = DXGI_SWAP_EFFECT_DISCARD; sd.Flags = 0; // Create the device. UINT createDeviceFlags = 0; #if defined(DEBUG) || defined(_DEBUG) createDeviceFlags |= D3D10_CREATE_DEVICE_DEBUG; #endif HR( D3D10CreateDeviceAndSwapChain( 0, //default adapter md3dDriverType, 0, // no software device createDeviceFlags, D3D10_SDK_VERSION, &sd, &mSwapChain, &md3dDevice) ); // The remaining steps that need to be carried out for d3d creation // also need to be executed every time the window is resized. So // just call the onResize method here to avoid code duplication. onResize(); }

Read the article

Scriptaculous Shaking Effect Problem

- by TheOnly92

The scriptaculous shaking effect somehow produce some bugs for Webkit browsers, including Chrome and Safari. When shaking, the element will shift to the top left of the screen covering everything. An example code is given as below, are there any ways of solving this? <html> <head> <script type='text/javascript' src='http://ajax.googleapis.com/ajax/libs/prototype/1.6.1/prototype.js'></script> <script type='text/javascript' src='http://ajax.googleapis.com/ajax/libs/scriptaculous/1.8.3/scriptaculous.js'></script> <script type='text/javascript' src='http://ajax.googleapis.com/ajax/libs/scriptaculous/1.8.3/scriptaculous.js?load=effects'></script> </head> <body> <div style="z-index: 20000; position: fixed; display: block; bottom: 10px; right: 10px; background-attachment: scroll; background-color: white;" id="floating_text"> <p>This should be some floating text.</p> <p>Some more floating text.</p> </div> <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer dui ligula, tempus adipiscing posuere id, sollicitudin sed nulla. Sed neque diam, volutpat non interdum vel, pellentesque vitae lorem. Vivamus et leo risus. Fusce at nunc nulla, non ultricies elit. Aliquam erat volutpat. Aliquam pulvinar mi at purus laoreet eu varius nisl laoreet. Mauris lobortis sapien diam. Maecenas arcu est, ullamcorper fringilla placerat nec, semper ut arcu. Curabitur metus nisl, ornare nec posuere at, tincidunt tempor nisi. Ut ut est risus. Curabitur elit urna, sagittis sagittis cursus quis, accumsan eget nulla. Donec odio ante, rutrum at fermentum vel, tempus gravida odio. Quisque a ante a urna vehicula posuere ac ut orci. Integer luctus sem et justo condimentum consequat. Phasellus pharetra malesuada velit, et commodo arcu imperdiet vitae. Suspendisse vitae risus orci. Maecenas massa tortor, sodales ut luctus ac, lacinia vitae sapien. Vestibulum sit amet rutrum est. Nullam magna erat, semper a volutpat id, porta sed nisl.</p> <p>Praesent nec consectetur sapien. Integer mollis libero a odio pharetra vulputate. Donec mattis consequat arcu, vel ultricies orci imperdiet sit amet. Mauris sit amet tellus libero. Morbi ac venenatis ligula. Cras tellus neque, porttitor sit amet hendrerit nec, ornare quis tellus. Nam iaculis mi at mi bibendum at commodo justo pretium. Ut in nibh non diam hendrerit fermentum a ut odio. Curabitur lorem turpis, tincidunt et rhoncus et, pulvinar a metus. Vestibulum a quam sit amet arcu condimentum cursus vitae feugiat lectus. Sed ut lorem tellus, non sagittis enim. Curabitur lectus eros, commodo a elementum et, molestie eget est. Donec ullamcorper, arcu nec volutpat auctor, sem odio interdum tellus, nec volutpat lacus libero at nisl. Aliquam metus sapien, aliquam a rutrum ac, tincidunt at purus. Donec in erat mi. Quisque semper mauris in massa bibendum sed tincidunt augue facilisis. In tempus lacinia urna ac tristique.</p> <p>Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Fusce tristique urna sem. Etiam iaculis aliquam dui nec porta. Proin tristique diam non augue mattis tristique. Phasellus nulla erat, adipiscing sed cursus sed, pulvinar eget nisl. Maecenas blandit nibh eu nisl facilisis et semper turpis posuere. Pellentesque auctor sem in massa sollicitudin congue. Vivamus quis lacinia massa. Aliquam sodales dictum magna, eget ullamcorper eros placerat at. Quisque gravida diam sit amet nunc porta aliquam. Ut quis aliquet est. Maecenas risus tellus, euismod id porttitor at, porta id turpis. Phasellus id molestie ante. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Aenean purus nibh, egestas vestibulum aliquet eget, luctus nec eros. Nulla facilisi. Quisque molestie, sem interdum posuere lacinia, nisl purus ornare lectus, id dapibus lacus dolor in ipsum. Aenean pharetra leo nulla.</p> <p>Curabitur nisi quam, iaculis eget pellentesque vel, pretium sed massa. In viverra, tellus at sollicitudin fringilla, orci eros blandit elit, a bibendum mauris dolor ut metus. Vivamus pellentesque suscipit diam, vitae euismod mi pellentesque vitae. Nullam neque libero, vehicula ut iaculis at, tincidunt eget leo. Suspendisse vitae velit justo. Nullam vitae sem tincidunt nulla tincidunt mollis in id massa. Duis rhoncus elementum turpis quis mollis. Vivamus egestas urna in velit commodo iaculis. Aenean quis dolor eu odio porttitor rhoncus nec vel eros. Donec ut est eu nisl vehicula pulvinar et id dolor. Donec a dolor neque. Morbi tempus mattis tortor ut rutrum. Phasellus orci metus, pellentesque vel tincidunt nec, pulvinar eu ante. Duis faucibus felis et diam ullamcorper in feugiat urna dignissim. Quisque nec diam mauris, vel viverra arcu. Cras sagittis dignissim nisl in sagittis. Fusce venenatis rhoncus est, nec elementum libero dapibus eget. Donec eu velit metus. Sed sollicitudin felis a diam condimentum in suscipit neque varius. Nulla nec tortor tristique elit malesuada luctus luctus quis leo.</p> <p>Nullam at quam dui. Ut gravida, tellus malesuada faucibus gravida, purus nulla consequat lorem, pellentesque egestas justo quam et enim. Suspendisse fringilla tellus id odio tristique varius. Cras et metus elit. Etiam interdum adipiscing mollis. Aliquam aliquet vestibulum imperdiet. In consectetur, nunc cursus sodales scelerisque, tellus eros tristique nisl, ut luctus augue dolor vel nibh. Fusce eget dui sed eros tristique varius lacinia id sapien. Nullam ac lorem ac lacus cursus ultricies id a risus. Ut eget dolor sem. Aliquam euismod consequat euismod. Duis sit amet neque et massa ullamcorper tempor.</p> <p>Quisque rutrum, ipsum ac volutpat dictum, urna diam facilisis enim, ac vestibulum justo metus eu mi. Curabitur nunc sem, consequat a mollis non, bibendum vitae dolor. Mauris pulvinar pellentesque tellus, vel aliquet mauris vulputate vel. Morbi eu ante id nulla ultricies tincidunt. Proin porta, felis nec tincidunt iaculis, justo nibh laoreet dolor, eu sollicitudin arcu justo et odio. Sed suscipit tellus lobortis est tristique semper fermentum magna laoreet. Sed eget ante nunc, vitae varius purus. Mauris nec viverra neque. Morbi et lectus velit. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Integer sit amet lobortis magna.</p> <p>Phasellus elementum iaculis sem in consectetur. Curabitur nec dictum enim. Nunc at pellentesque augue. Nulla sit amet sapien neque, et molestie augue. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Proin non elit ante. Mauris justo tellus, feugiat at dapibus a, placerat id felis. Nullam lobortis vehicula rutrum. Fusce tristique pharetra urna, ac scelerisque ipsum consequat eget. Morbi at ipsum in tellus luctus volutpat. Duis placerat accumsan lacus, dictum convallis elit porttitor eu.</p> <p>Sed ac neque sit amet neque luctus rhoncus. Vestibulum sit amet commodo ante. Duis ullamcorper est id dui ullamcorper cursus. Maecenas fringilla ultricies turpis, nec pulvinar libero faucibus a. Quisque bibendum aliquam sapien, in fermentum arcu iaculis at. Mauris bibendum, metus sed rhoncus fringilla, nisl purus interdum eros, vitae malesuada felis est rhoncus magna. Phasellus elit justo, sagittis nec interdum tincidunt, mollis quis justo. Suspendisse rhoncus rutrum vestibulum. Aliquam ut nunc lectus, quis aliquam risus. Aliquam vel nulla sed odio blandit sagittis. Nulla facilisi. Vivamus ullamcorper, lectus facilisis eleifend accumsan, purus massa sollicitudin nunc, in sodales tellus dui eget est. Morbi ipsum nisi, semper sit amet vehicula sit amet, semper at mauris. Nam mollis massa sed risus scelerisque quis congue mauris tempus. Vestibulum nec urna magna, vitae ornare massa. Aenean adipiscing tempor rutrum.</p> <p>In hac habitasse platea dictumst. Etiam in dolor eros, eleifend volutpat magna. Sed blandit gravida feugiat. Sed eu dolor in odio sagittis molestie eget ac orci. Phasellus tellus erat, scelerisque tincidunt lacinia sed, placerat eu sapien. Curabitur lobortis feugiat cursus. Nam eu egestas justo. Nullam dignissim enim ipsum, sed semper orci. Donec nulla dui, viverra vel viverra eu, eleifend nec justo. Sed in ultricies turpis. Maecenas ullamcorper, erat ac scelerisque mattis, augue magna laoreet mauris, nec sagittis tellus enim eget tellus. Lorem ipsum dolor sit amet, consectetur adipiscing elit. In vestibulum urna eu magna ultricies adipiscing. Phasellus sed urna at nibh euismod vestibulum at eget dui. Nulla ullamcorper viverra tellus ut volutpat. Praesent hendrerit, purus a imperdiet tempus, turpis est suscipit felis, ut commodo diam orci ac augue. Quisque consectetur varius sapien, vel lobortis ante porttitor sit amet. Proin fermentum blandit justo, id faucibus elit feugiat ut. Nulla quam elit, tristique gravida ultrices in, imperdiet et enim.</p> <p>Aliquam malesuada, nibh eget laoreet malesuada, lorem ligula gravida eros, a consectetur dui odio id urna. Vivamus tincidunt porttitor facilisis. Maecenas vitae lacus at lorem porttitor sodales. Duis et velit ac ipsum cursus ornare. Aliquam eu rhoncus est. Cras nec facilisis tellus. Nunc in felis odio. Nam facilisis dui eu lacus egestas sit amet malesuada dolor volutpat. In placerat dictum turpis ac vulputate. Suspendisse neque odio, elementum sagittis sollicitudin quis, eleifend ac orci. Proin suscipit molestie orci non venenatis. Sed metus mauris, laoreet id lobortis at, tempor eu erat. Mauris tempor, nisi id interdum tempor, tellus ligula pretium mi, a viverra nibh neque vitae est. Integer mattis, lorem ac congue fermentum, quam ipsum gravida erat, in egestas lorem eros ac massa. Vestibulum lobortis ante libero, vel fermentum ante. Aliquam augue ipsum, ullamcorper sit amet dictum id, commodo sit amet lacus. Vivamus elit purus, elementum a vestibulum quis, iaculis id metus. Cras facilisis orci in nulla consequat gravida. Integer blandit, felis at lacinia porta, lacus velit pretium magna, ut eleifend diam magna a justo. Donec scelerisque diam quis nisi molestie vel egestas urna condimentum. </p> <script type="text/javascript"> Effect.Shake('floating_text'); </script> </body> </html>

Read the article

strange sqares like hints in Silverlight application?

- by lina

Good day! Strange square appears on mouse hover on text boxes, buttons, etc (something like hint) in a silverlight navigation application - how can I remove it? a scrin shot an example .xaml page: <Code:BasePage x:Class="CAP.Views.Main" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:Code="clr-namespace:CAP.Code" d:DesignWidth="640" d:DesignHeight="480" Title="?????? ??????? ???????? ??? ?????"> <Grid x:Name="LayoutRoot"> <Grid.RowDefinitions> <RowDefinition Height="103*" /> <RowDefinition Height="377*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="120*" /> <ColumnDefinition Width="520*" /> </Grid.ColumnDefinitions> <Image Height="85" HorizontalAlignment="Left" Name="image1" Stretch="Fill" VerticalAlignment="Top" Width="84" Margin="12,0,0,0" ImageFailed="image1_ImageFailed" Source="/CAP;component/Images/My-Computer.png" /> <TextBlock Grid.Column="1" Height="Auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="0,12,0,0" Name="textBlock1" Text="Good day!" VerticalAlignment="Top" FontFamily="Verdana" FontSize="16" Width="345" FontWeight="Bold" /> <TextBlock Grid.Column="1" Grid.Row="1" TextWrapping="Wrap" Height="299" HorizontalAlignment="Left" Name="textBlock2" VerticalAlignment="Top" FontFamily="Verdana" FontSize="14" Width="441" > <Run Text="Some text "/><LineBreak/><LineBreak/><Run Text="and so on"/> <LineBreak/> </TextBlock> </Grid> xaml.cs: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Navigation; using CAP.Code; namespace CAP.Views { public partial class Main : BasePage { public Main() : base() { InitializeComponent(); MapBuilder.AddToMap(new SiteMapUnit() { Caption = "???????", RelativeUrl = "Main" },true); ((App)Application.Current).Mainpage.tvMainMenu.SelectedItems.Clear(); } // Executes when the user navigates to this page. protected override void OnNavigatedTo(NavigationEventArgs e) { } private void image1_ImageFailed(object sender, ExceptionRoutedEventArgs e) { } protected override string[] NeededPermission() { return new string[0]; } } } MainPage.xaml <UserControl x:Class="CAP.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Code="clr-namespace:CAP.Code" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:uriMapper="clr-namespace:System.Windows.Navigation;assembly=System.Windows.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation" mc:Ignorable="d" Margin="0,0,0,0" Width="auto" Height="auto" xmlns:dataInput="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input"> <ScrollViewer Width="auto" Height="auto" BorderBrush="White" BorderThickness="0" Margin="0,0,0,0" x:Name="sV" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Auto" > <ScrollViewer.Content> <Grid Width="auto" Height="auto" x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}" Margin="0,0,0,0"> <StackPanel Width="auto" Height="auto" Orientation="Vertical" Margin="250,0,0,50"> <Border x:Name="ContentBorder2" Margin="0,0,0,0" >  <StackPanel Orientation="Vertical" Height="82" Width="Auto" HorizontalAlignment="Right" Margin="0,0,0,0" DataContext="{Binding}"> <TextBlock HorizontalAlignment="Right" Foreground="White" x:Name="ApplicationNameTextBlock4" Style="{StaticResource ApplicationNameStyle}" FontSize="20" Text="?????? ???????" Margin="20,16,20,0"/> <StackPanel Orientation="Horizontal" HorizontalAlignment="Right"> <Image x:Name="imDoor" Visibility="Collapsed" MouseEnter="imDoor_MouseEnter" MouseLeave="imDoor_MouseLeave" Height="24" Stretch="Fill" Width="25" Margin="10,0,10,0" Source="/CAP;component/Images/sm_white_doors.png" MouseLeftButtonDown="bTest_Click" /> <TextBlock x:Name="bLogout" MouseEnter="bLogout_MouseEnter" MouseLeave="bLogout_MouseLeave" TextDecorations="Underline" Margin="0,6,20,4" Height="23" Text="?????" HorizontalAlignment="Right" Visibility="Collapsed" MouseLeftButtonDown="bTest_Click" FontFamily="Verdana" FontSize="13" FontWeight="Normal" Foreground="#FF1C1C92" /> </StackPanel> </StackPanel> </Border> <Border x:Name="bSiteMap" Margin="0,0,0,0" > <StackPanel x:Name="spSiteMap" Orientation="Horizontal" Height="20" Width="Auto" HorizontalAlignment="Left" Margin="0,0,0,0" DataContext="{Binding}">  </StackPanel> </Border> <Border Width="auto" Height="auto" x:Name="ContentBorder" Margin="0,0,0,0" > <navigation:Frame x:Name="ContentFrame" Style="{StaticResource ContentFrameStyle}" Source="Main" Navigated="ContentFrame_Navigated" NavigationFailed="ContentFrame_NavigationFailed" ToolTipService.ToolTip=" " Margin="0,0,0,0"> <navigation:Frame.UriMapper> <uriMapper:UriMapper>  <uriMapper:UriMapping Uri="RegistrateClient" MappedUri="/Views/Client/RegistrateClient.xaml"/>  </uriMapper:UriMapper> </navigation:Frame.UriMapper> </navigation:Frame> </Border> </StackPanel> <Grid x:Name="NavigationGrid" Style="{StaticResource NavigationGridStyle}" Margin="0,0,0,0" Background="{x:Null}" > <StackPanel Orientation="Vertical" Height="Auto" Width="250" HorizontalAlignment="Center" Margin="0,0,0,50" DataContext="{Binding}"> <Image Width="150" Height="90" HorizontalAlignment="Center" VerticalAlignment="Top" Source="/CAP;component/Images/logo__au.png" Margin="0,20,0,70"/> <Border x:Name="BrandingBorder" MinHeight="222" Width="250" Style="{StaticResource BrandingBorderStyle3}" HorizontalAlignment="Center" Opacity="60" Margin="0,0,0,0"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/papka.png"/> </Border.Background> <Grid Width="250" x:Name="LichniyCabinet" Margin="0,10,0,0" HorizontalAlignment="Center" Height="211"> <Grid.ColumnDefinitions> <ColumnDefinition Width="19*" /> <ColumnDefinition Width="62*" /> <ColumnDefinition Width="151*" /> <ColumnDefinition Width="18*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="13" /> <RowDefinition Height="24" /> <RowDefinition Height="35" /> <RowDefinition Height="35" /> <RowDefinition Height="43" /> <RowDefinition Height="28" /> <RowDefinition Height="32*" /> </Grid.RowDefinitions> <TextBlock Visibility="Visible" Grid.Row="2" Height="23" HorizontalAlignment="Left" x:Name="tLogin" Text="?????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Margin="1,0,0,0" Grid.Column="1" /> <TextBlock Visibility="Visible" FontFamily="Verdana" FontSize="13" Foreground="White" Height="23" HorizontalAlignment="Left" x:Name="tPassw" Text="??????" VerticalAlignment="Top" Grid.Row="3" Grid.Column="1" /> <TextBox Visibility="Visible" Grid.Column="2" Grid.Row="2" Height="24" HorizontalAlignment="Left" x:Name="logLogin" VerticalAlignment="Top" Width="150" /> <PasswordBox Visibility="Visible" Code:DefaultButtonService.DefaultButton="{Binding ElementName=bLogin}" PasswordChar="*" Height="24" HorizontalAlignment="Left" x:Name="logPassword" VerticalAlignment="Top" Width="150" Grid.Column="2" Grid.Row="3" /> <Button x:Name="bLogin" MouseEnter="bLogin_MouseEnter" MouseLeave="bLogin_MouseLeave" Visibility="Visible" Content="?????" Grid.Column="2" Grid.Row="4" Click="Button_Click" Height="23" HorizontalAlignment="Left" Margin="81,0,0,0" VerticalAlignment="Top" Width="70" /> <TextBlock MouseLeftButtonDown="ForgotPassword_MouseLeftButtonDown" MouseEnter="ForgotPassword_MouseEnter" MouseLeave="ForgotPassword_MouseLeave" Visibility="Visible" TextDecorations="Underline" Grid.ColumnSpan="2" Grid.Row="4" Height="23" HorizontalAlignment="Left" x:Name="ForgotPassword" Text="?????? ???????" VerticalAlignment="Top" Foreground="White" FontFamily="Verdana" FontSize="13" Grid.Column="1" /> <TextBlock MouseEnter="tbRegistration_MouseEnter" MouseLeave="tbRegistration_MouseLeave" MouseLeftButtonDown="tbRegistration_MouseLeftButtonDown" Grid.Column="2" Grid.Row="6" Height="23" x:Name="tbRegistration" TextDecorations="Underline" Text="???????????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" TextAlignment="Center" HorizontalAlignment="Center" Foreground="#FF1C1C92" FontWeight="Normal" Margin="0,0,57,0" /> <TextBlock Cursor="Arrow" Height="23" HorizontalAlignment="Left" Margin="11,-3,0,0" Text="?????? ???????" VerticalAlignment="Top" Grid.ColumnSpan="3" Grid.RowSpan="2" FontFamily="Verdana" FontSize="13" FontWeight="Bold" Foreground="White" /> <Image Visibility="Collapsed" Height="70" x:Name="imUser" Stretch="Fill" Width="70" Grid.ColumnSpan="2" Margin="11,0,0,0" Grid.Row="2" Grid.RowSpan="2" Source="/CAP;component/Images/user2.png" /> <TextBlock x:Name="tbHello" Grid.Column="2" Visibility="Collapsed" Grid.Row="2" Height="auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="6,0,0,0" Text="" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Width="145" /> </Grid> </Border> <Border x:Name="MenuBorder" Margin="0,0,0,50" Width="250" Visibility="Collapsed"> <StackPanel x:Name="spMenu" Width="240" HorizontalAlignment="Left"> <telerikNavigation:RadTreeView x:Name="tvMainMenu" Width="240" Selected="TreeView1_Selected" SelectedValuePath="Text" telerik:Theming.Theme="Windows7" FontFamily="Verdana" FontSize="12"/> </StackPanel> </Border> </StackPanel> </Grid> <Border x:Name="FooterBorder" VerticalAlignment="Bottom" Width="auto" Height="76"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/footer2.png" /> </Border.Background> <TextBlock x:Name="tbFooter" Height="24" Width="auto" Margin="0,20,0,0" TextAlignment="Center" HorizontalAlignment="Stretch" VerticalAlignment="Center" Foreground="White" FontFamily="Verdana" FontSize="11"> </TextBlock> </Border> </Grid> </ScrollViewer.Content> </ScrollViewer> </UserControl> MainPage.xaml.cs using System; using System.Collections.Generic; using System.Linq; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Navigation; using CAP.Code; using CAP.Registrator; using System.Windows.Input; using System.ComponentModel.DataAnnotations; using System.Windows.Browser; using Telerik.Windows.Controls; using System.Net; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Navigation; using System.Windows.Shapes; namespace CAP { public partial class MainPage { public App Appvars = Application.Current as App; private readonly RegistratorClient registrator; public SiteMapBuilder builder; public MainPage() { InitializeComponent(); sV.SetIsMouseWheelScrollingEnabled(true); builder = new SiteMapBuilder(spSiteMap); try { //working with service } catch { this.ContentFrame.Navigate(new Uri(String.Format("ErrorPage"), UriKind.RelativeOrAbsolute)); } } /// Recursive method to update the correct scrollviewer (if exists) private ScrollViewer CheckParent(FrameworkElement element) { ScrollViewer _result = element as ScrollViewer; if (element != null && _result == null) { FrameworkElement _temp = element.Parent as FrameworkElement; _result = CheckParent(_temp); } return _result; } // If an error occurs during navigation, show an error window private void ContentFrame_NavigationFailed(object sender, NavigationFailedEventArgs e) { e.Handled = true; ChildWindow errorWin = new ErrorWindow(e.Uri); errorWin.Show(); } } }

Read the article

.NET Winform AJAX Login Services

- by AdamSane

I am working on a Windows Form that connects to a ASP.NET membership database and I am trying to use the AJAX Login Service. No matter what I do I keep on getting 404 errors on the Authentication_JSON_AppService.axd call. Web Config Below <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <connectionStrings  /> <appSettings/> <system.web>  <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <membership defaultProvider="dbSqlMembershipProvider"> <providers> <add name="dbSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership> <roleManager enabled="true" defaultProvider="dbSqlRoleProvider"> <providers> <add connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" applicationName="/" name="dbSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> <authentication mode="Forms"> <forms loginUrl="Login.aspx" cookieless="UseCookies" protection="All" timeout="30" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" enableCrossAppRedirects="false"/> </authentication> <authorization> <allow users="*"/> <allow users="?"/> </authorization> <customErrors mode="Off"> </customErrors> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <location path="~/Admin"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Admin/System"> <system.web> <authorization> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Export"> <system.web> <authorization> <allow roles="Export"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Field"> <system.web> <authorization> <allow roles="Field"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Default.aspx"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <allow roles="Export"/> <allow roles="Field"/> <deny users="?"/> </authorization> </system.web> </location> <location path="~/Login.aspx"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/App_Themes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Includes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/WebServices"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Authentication_JSON_AppService.axd"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration>

Read the article

How to edit item in a listbox shown from reading a .csv file?

- by Shuvo

I am working in a project where my application can open a .csv file and read data from it. The .csv file contains the latitude, longitude of places. The application reads data from the file shows it in a static map and display icon on the right places. The application can open multiple file at a time and it opens with a new tab every time. But I am having trouble in couple of cases When I am trying to add a new point to the .csv file opened. I am able to write new point on the same file instead adding a new point data to the existing its replacing others and writing the new point only. I cannot use selectedIndexChange event to perform edit option on the listbox and then save the file. Any direction would be great. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.IO; namespace CourseworkExample { public partial class Form1 : Form { public GPSDataPoint gpsdp; List<GPSDataPoint> data; List<PictureBox> pictures; List<TabPage> tabs; public static int pn = 0; private TabPage currentComponent; private Bitmap bmp1; string[] symbols = { "hospital", "university" }; Image[] symbolImages; ListBox lb = new ListBox(); string name = ""; string path = ""; public Form1() { InitializeComponent(); data = new List<GPSDataPoint>(); pictures = new List<PictureBox>(); tabs = new List<TabPage>(); symbolImages = new Image[symbols.Length]; for (int i = 0; i < 2; i++) { string location = "data/" + symbols[i] + ".png"; symbolImages[i] = Image.FromFile(location); } } private void openToolStripMenuItem_Click(object sender, EventArgs e) { FileDialog ofd = new OpenFileDialog(); string filter = "CSV File (*.csv)|*.csv"; ofd.Filter = filter; DialogResult dr = ofd.ShowDialog(); if (dr.Equals(DialogResult.OK)) { int i = ofd.FileName.LastIndexOf("\\"); name = ofd.FileName; path = ofd.FileName; if (i > 0) { name = ofd.FileName.Substring(i + 1); path = ofd.FileName.Substring(0, i + 1); } TextReader input = new StreamReader(ofd.FileName); string mapName = input.ReadLine(); GPSDataPoint gpsD = new GPSDataPoint(); gpsD.setBounds(input.ReadLine()); string s; while ((s = input.ReadLine()) != null) { gpsD.addWaypoint(s); } input.Close(); TabPage tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; lb.Width = 300; int selectedindex = lb.SelectedIndex; lb.Items.Add(mapName); lb.Items.Add("Bounds"); lb.Items.Add(gpsD.Bounds[0] + " " + gpsD.Bounds[1] + " " + gpsD.Bounds[2] + " " + gpsD.Bounds[3]); lb.Items.Add("Waypoint"); foreach (WayPoint wp in gpsD.DataList) { lb.Items.Add(wp.Name + " " + wp.Latitude + " " + wp.Longitude + " " + wp.Ele + " " + wp.Sym); } tabPage.Controls.Add(lb); pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = name; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); tabControl1.Controls.Add(tabPage); tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = mapName; string location = path + mapName; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); PictureBox pb = new PictureBox(); pb.Name = "pictureBox" + pn; pb.Image = Image.FromFile(location); tabControl2.Controls.Add(tabPage); pb.Width = pb.Image.Width; pb.Height = pb.Image.Height; tabPage.Controls.Add(pb); currentComponent = tabPage; tabPage.Width = pb.Width; tabPage.Height = pb.Height; pn++; tabControl2.Width = pb.Width; tabControl2.Height = pb.Height; bmp1 = (Bitmap)pb.Image; int lx, ly; float realWidth = gpsD.Bounds[1] - gpsD.Bounds[3]; float imageW = pb.Image.Width; float dx = imageW * (gpsD.Bounds[1] - gpsD.getWayPoint(0).Longitude) / realWidth; float realHeight = gpsD.Bounds[0] - gpsD.Bounds[2]; float imageH = pb.Image.Height; float dy = imageH * (gpsD.Bounds[0] - gpsD.getWayPoint(0).Latitude) / realHeight; lx = (int)dx; ly = (int)dy; using (Graphics g = Graphics.FromImage(bmp1)) { Rectangle rect = new Rectangle(lx, ly, 20, 20); if (gpsD.getWayPoint(0).Sym.Equals("")) { g.DrawRectangle(new Pen(Color.Red), rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("hospital")) { g.DrawImage(symbolImages[0], rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("university")) { g.DrawImage(symbolImages[1], rect); } } } } pb.Image = bmp1; pb.Invalidate(); } } private void openToolStripMenuItem_Click_1(object sender, EventArgs e) { FileDialog ofd = new OpenFileDialog(); string filter = "CSV File (*.csv)|*.csv"; ofd.Filter = filter; DialogResult dr = ofd.ShowDialog(); if (dr.Equals(DialogResult.OK)) { int i = ofd.FileName.LastIndexOf("\\"); name = ofd.FileName; path = ofd.FileName; if (i > 0) { name = ofd.FileName.Substring(i + 1); path = ofd.FileName.Substring(0, i + 1); } TextReader input = new StreamReader(ofd.FileName); string mapName = input.ReadLine(); GPSDataPoint gpsD = new GPSDataPoint(); gpsD.setBounds(input.ReadLine()); string s; while ((s = input.ReadLine()) != null) { gpsD.addWaypoint(s); } input.Close(); TabPage tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; ListBox lb = new ListBox(); lb.Width = 300; lb.Items.Add(mapName); lb.Items.Add("Bounds"); lb.Items.Add(gpsD.Bounds[0] + " " + gpsD.Bounds[1] + " " + gpsD.Bounds[2] + " " + gpsD.Bounds[3]); lb.Items.Add("Waypoint"); foreach (WayPoint wp in gpsD.DataList) { lb.Items.Add(wp.Name + " " + wp.Latitude + " " + wp.Longitude + " " + wp.Ele + " " + wp.Sym); } tabPage.Controls.Add(lb); pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = name; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); tabControl1.Controls.Add(tabPage); tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = mapName; string location = path + mapName; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); PictureBox pb = new PictureBox(); pb.Name = "pictureBox" + pn; pb.Image = Image.FromFile(location); tabControl2.Controls.Add(tabPage); pb.Width = pb.Image.Width; pb.Height = pb.Image.Height; tabPage.Controls.Add(pb); currentComponent = tabPage; tabPage.Width = pb.Width; tabPage.Height = pb.Height; pn++; tabControl2.Width = pb.Width; tabControl2.Height = pb.Height; bmp1 = (Bitmap)pb.Image; int lx, ly; float realWidth = gpsD.Bounds[1] - gpsD.Bounds[3]; float imageW = pb.Image.Width; float dx = imageW * (gpsD.Bounds[1] - gpsD.getWayPoint(0).Longitude) / realWidth; float realHeight = gpsD.Bounds[0] - gpsD.Bounds[2]; float imageH = pb.Image.Height; float dy = imageH * (gpsD.Bounds[0] - gpsD.getWayPoint(0).Latitude) / realHeight; lx = (int)dx; ly = (int)dy; using (Graphics g = Graphics.FromImage(bmp1)) { Rectangle rect = new Rectangle(lx, ly, 20, 20); if (gpsD.getWayPoint(0).Sym.Equals("")) { g.DrawRectangle(new Pen(Color.Red), rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("hospital")) { g.DrawImage(symbolImages[0], rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("university")) { g.DrawImage(symbolImages[1], rect); } } } } pb.Image = bmp1; pb.Invalidate(); MessageBox.Show(data.ToString()); } } private void exitToolStripMenuItem_Click(object sender, EventArgs e) { this.Close(); } private void addBtn_Click(object sender, EventArgs e) { string wayName = nameTxtBox.Text; float wayLat = Convert.ToSingle(latTxtBox.Text); float wayLong = Convert.ToSingle(longTxtBox.Text); float wayEle = Convert.ToSingle(elevTxtBox.Text); WayPoint wp = new WayPoint(wayName, wayLat, wayLong, wayEle); GPSDataPoint gdp = new GPSDataPoint(); data = new List<GPSDataPoint>(); gdp.Add(wp); lb.Items.Add(wp.Name + " " + wp.Latitude + " " + wp.Longitude + " " + wp.Ele + " " + wp.Sym); lb.Refresh(); StreamWriter sr = new StreamWriter(name); sr.Write(lb); sr.Close(); DialogResult result = MessageBox.Show("Save in New File?","Save", MessageBoxButtons.YesNo); if (result == DialogResult.Yes) { SaveFileDialog saveDialog = new SaveFileDialog(); saveDialog.FileName = "default.csv"; DialogResult saveResult = saveDialog.ShowDialog(); if (saveResult == DialogResult.OK) { sr = new StreamWriter(saveDialog.FileName, true); sr.WriteLine(wayName + "," + wayLat + "," + wayLong + "," + wayEle); sr.Close(); } } else { // sr = new StreamWriter(name, true); // sr.WriteLine(wayName + "," + wayLat + "," + wayLong + "," + wayEle); sr.Close(); } MessageBox.Show(name + path); } } } GPSDataPoint.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; namespace CourseworkExample { public class GPSDataPoint { private float[] bounds; private List<WayPoint> dataList; public GPSDataPoint() { dataList = new List<WayPoint>(); } internal void setBounds(string p) { string[] b = p.Split(','); bounds = new float[b.Length]; for (int i = 0; i < b.Length; i++) { bounds[i] = Convert.ToSingle(b[i]); } } public float[] Bounds { get { return bounds; } } internal void addWaypoint(string s) { WayPoint wp = new WayPoint(s); dataList.Add(wp); } public WayPoint getWayPoint(int i) { if (i < dataList.Count) { return dataList[i]; } else return null; } public List<WayPoint> DataList { get { return dataList; } } internal void Add(WayPoint wp) { dataList.Add(wp); } } } WayPoint.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace CourseworkExample { public class WayPoint { private string name; private float ele; private float latitude; private float longitude; private string sym; public WayPoint(string name, float latitude, float longitude, float elevation) { this.name = name; this.latitude = latitude; this.longitude = longitude; this.ele = elevation; } public WayPoint() { name = "no name"; ele = 3.5F; latitude = 3.5F; longitude = 0.0F; sym = "no symbol"; } public WayPoint(string s) { string[] bits = s.Split(','); name = bits[0]; longitude = Convert.ToSingle(bits[2]); latitude = Convert.ToSingle(bits[1]); if (bits.Length > 4) sym = bits[4]; else sym = ""; try { ele = Convert.ToSingle(bits[3]); } catch (Exception e) { ele = 0.0f; } } public float Longitude { get { return longitude; } set { longitude = value; } } public float Latitude { get { return latitude; } set { latitude = value; } } public float Ele { get { return ele; } set { ele = value; } } public string Name { get { return name; } set { name = value; } } public string Sym { get { return sym; } set { sym = value; } } } } .csv file data birthplace.png 51.483788,-0.351906,51.460745,-0.302982 Born Here,51.473805,-0.32532,-,hospital Danced here,51,483805,-0.32532,-,hospital

Read the article

Use ASP.NET 4 Browser Definitions with ASP.NET 3.5

- by Stephen Walther

We updated the browser definitions files included with ASP.NET 4 to include information on recent browsers and devices such as Google Chrome and the iPhone. You can use these browser definition files with earlier versions of ASP.NET such as ASP.NET 3.5. The updated browser definition files, and instructions for installing them, can be found here: http://aspnet.codeplex.com/releases/view/41420 The changes in the browser definition files can cause backwards compatibility issues when you upgrade an ASP.NET 3.5 web application to ASP.NET 4. If you encounter compatibility issues, you can install the old browser definition files in your ASP.NET 4 application. The old browser definition files are included in the download file referenced above. What’s New in the ASP.NET 4 Browser Definition Files The complete set of browsers supported by the new ASP.NET 4 browser definition files is represented by the following figure: If you look carefully at the figure, you’ll notice that we added browser definitions for several types of recent browsers such as Internet Explorer 8, Firefox 3.5, Google Chrome, Opera 10, and Safari 4. Furthermore, notice that we now include browser definitions for several of the most popular mobile devices: BlackBerry, IPhone, IPod, and Windows Mobile (IEMobile). The mobile devices appear in the figure with a purple background color. To improve performance, we removed a whole lot of outdated browser definitions for old cell phones and mobile devices. We also cleaned up the information contained in the browser files. Here are some of the browser features that you can detect: Are you a mobile device? <%=Request.Browser.IsMobileDevice %> Are you an IPhone? <%=Request.Browser.MobileDeviceModel == "IPhone" %> What version of JavaScript do you support? <%=Request.Browser["javascriptversion"] %> What layout engine do you use? <%=Request.Browser["layoutEngine"] %> Here’s what you would get if you displayed the value of these properties using Internet Explorer 8: Here’s what you get when you use Google Chrome: Testing Browser Settings When working with browser definition files, it is useful to have some way to test the capability information returned when you request a page with different browsers. You can use the following method to return the HttpBrowserCapabilities the corresponds to a particular user agent string and set of browser headers: public HttpBrowserCapabilities GetBrowserCapabilities(string userAgent, NameValueCollection headers) { HttpBrowserCapabilities browserCaps = new HttpBrowserCapabilities(); Hashtable hashtable = new Hashtable(180, StringComparer.OrdinalIgnoreCase); hashtable[string.Empty] = userAgent; // The actual method uses client target browserCaps.Capabilities = hashtable; var capsFactory = new System.Web.Configuration.BrowserCapabilitiesFactory(); capsFactory.ConfigureBrowserCapabilities(headers, browserCaps); capsFactory.ConfigureCustomCapabilities(headers, browserCaps); return browserCaps; } At the end of this blog entry, there is a link to download a simple Visual Studio 2008 project – named Browser Definition Test -- that uses this method to display capability information for arbitrary user agent strings. For example, if you enter the user agent string for an iPhone then you get the results in the following figure: The Browser Definition Test application enables you to submit a user-agent string and display a table of browser capabilities information. The browser definition files contain sample user-agent strings for each browser definition. I got the iPhone user-agent string from the comments in the iphone.browser file. Enumerating Browser Definitions Someone asked in the comments whether or not there is a way to enumerate all of the browser definitions. You can do this if you ware willing to use a little reflection and read a private property. The browser definition files in the config\browsers folder get parsed into a class named BrowserCapabilitesFactory. After you run the aspnet_regbrowsers tool, you can see the source for this class in the config\browser folder by opening a file named BrowserCapsFactory.cs. The BrowserCapabilitiesFactoryBase class has a protected property named BrowserElements that represents a Hashtable of all of the browser definitions. Here's how you can read this protected property and display the ID for all of the browser definitions: var propInfo = typeof(BrowserCapabilitiesFactory).GetProperty("BrowserElements", BindingFlags.NonPublic | BindingFlags.Instance); Hashtable browserDefinitions = (Hashtable)propInfo.GetValue(new BrowserCapabilitiesFactory(), null); foreach (var key in browserDefinitions.Keys) { Response.Write("" + key); } If you run this code using Visual Studio 2008 then you get the following results: You get a huge number of outdated browsers and devices. In all, 449 browser definitions are listed. If you run this code using Visual Studio 2010 then you get the following results: In the case of Visual Studio 2010, all the old browsers and devices have been removed and you get only 19 browser definitions. Conclusion The updated browser definition files included in ASP.NET 4 provide more accurate information for recent browsers and devices. If you would like to test the new browser definitions with different user-agent strings then I recommend that you download the Browser Definition Test project: Browser Definition Test Project

Read the article

Adding A Custom Dropdown in RCDC for Forefront Identity Manager 2010

- by Daniel Lackey

My latest exploration has been FIM 2010 for Identity Management. The following is a post of how to add a custom dropdown for the FIM Portal. I have decided to document this as I cannot find documentation on how to do this anywhere else. I hope that it finds useful to others. For starters, this was to me not an easy task to figure out. I really would like to know why it is so cumbersome to do something that seems like a lot of people would need to do, but that’s for another day J The dropdown I wanted to add was for ‘Account Status’ which would display if the account is ‘Enabled’ or ‘Disabled’ in the data source Active Directory. This option would also allow helpdesk users or admins to administer the userAccountControl attribute in AD from the FIM Portal interface. The first thing I had to do was create the attribute itself. This is done by going to Administration à Schema Management from the FIM 2010 portal. Once here, you click on All Attributes. What is listed here are all attributes and their associated Resource Types in FIM. To create the ‘AccountStatus’ attribute, click on New. As shown below, enter ‘AccountStatus’ with no spaces for the System Name and ‘Account Status’ for the Display Name. The Data Type is going to be ‘Indexed String’. Click Next. Leave everything on the Localization tab default and click Next. On the Validation tab as shown below, we will enter the regex expression ^(Enabled|Disabled)?$ with our two desired string values ‘Enabled’ and ‘Disabled’. Click on Finish and then and Submit to complete adding the attribute. The next step involves associating the attribute with a resource type. This is called ‘Binding’ the attribute. From the Schema Management page, click on All Bindings. From the page that comes up, click on New. As shown below, enter ‘User’ for the Resource Type and ‘Account Status’ for the Attribute Type. This is essentially binding the Account Status attribute to the ‘User’ Resource Type. Click Next. On the ‘Attribute Override’ tab, type in ‘Account Status’ for the Display Name field. Click Next. On the ‘Localization’ tab, click Next. On the ‘Validation’ tab, enter the regex expression ^(Enabled|Disabled)?$ we entered previously for the attribute. Click Finish and then Submit to complete. Now that the Attribute and the Binding are complete, you have to give users permission to see the attribute on the User Edit page. Go to Administration à Management Policy Rules. Look for the rule named Administration: Administrators can read and update Users and click on it. Once it opens, click on the ‘Target Resources’ tab and look at the section named Resource Attributes. Type in at the end the ‘Account Status’ attribute and check it with the validator. Once done click on OK to save the changes. Lastly, we need to add the actual dropdown control to the RCDC (Resource Control Display Configuration) for User Editing. Go to Administration à Resource Control Display Configuration. From here navigate until you find the RCDC named Configuration for User Editing RCDC and click on it. The following is what you will see: First step is to export the Configuration Data file. Click on the Export configuration link and save the file to your desktop of other folder. Find the file you just exported and open the file in your XML editor of choice. I use notepad but anything will work. Since we are adding a dropdown control, first find another control in the existing file that is already a dropdown in FIM. I used EmployeeType as my example. Copy the control from the beginning tag named <my:Control… to the ending tag </my:Control>. Now take what you copied and paste it in whatever location you desire within the form between two other controls. I chose to place the ‘Account Status’ field after the ‘Account Name’ field. After you paste the control you will need to modify so it looks like this: Notice where you specify what attribute you are dealing with where it has AccountStatus in the XML. Once you are complete with modifying this, save the file and make sure it is a .xml file. Now go back to the Configuration for User Editing screen and look at the section named ‘Configuration Data’. Click the ‘Browse’ button and find the XML file you just modified and choose it. Click OK on the bottom of the window and you are done! Now when you click on a user’s name in the FIM Portal, you should see the newly added dropdown box as below: Later I will post more about this drop down, specifically on how to automate actually ‘Disabling’ the account in the data source through the FIM Workflows and MAs. <my:Control my:Name="AccountStatus" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=AccountStatus.DisplayName}" my:Description="{Binding Source=schema, Path=AccountStatus.Description}" my:RightsLevel="{Binding Source=rights, Path=AccountStatus}"> <my:Properties> <my:Property my:Name="ValuePath" my:Value="Value"/> <my:Property my:Name="CaptionPath" my:Value="Caption"/> <my:Property my:Name="HintPath" my:Value="Hint"/> <my:Property my:Name="ItemSource" my:Value="{Binding Source=schema, Path=AccountStatus.LocalizedAllowedValues}"/> <my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=AccountStatus, Mode=TwoWay}"/> </my:Properties> </my:Control>

Read the article

WCF REST on .Net 4.0

- by AngelEyes

A simple and straight forward article taken from: http://christopherdeweese.com/blog2/post/drop-the-soap-wcf-rest-and-pretty-uris-in-net-4 Drop the Soap: WCF, REST, and Pretty URIs in .NET 4 Years ago I was working in libraries when the Web 2.0 revolution began. One of the things that caught my attention about early start-ups using the AJAX/REST/Web 2.0 model was how nice the URIs were for their applications. Those were my first impressions of REST; pretty URIs. Turns out there is a little more to it than that. REST is an architectural style that focuses on resources and structured ways to access those resources via the web. REST evolved as an “anti-SOAP” movement, driven by developers who did not want to deal with all the complexity SOAP introduces (which is al lot when you don’t have frameworks hiding it all). One of the biggest benefits to REST is that browsers can talk to rest services directly because REST works using URIs, QueryStrings, Cookies, SSL, and all those HTTP verbs that we don’t have to think about anymore. If you are familiar with ASP.NET MVC then you have been exposed to rest at some level. MVC is relies heavily on routing to generate consistent and clean URIs. REST for WCF gives you the same type of feel for your services. Let’s dive in. WCF REST in .NET 3.5 SP1 and .NET 4 This post will cover WCF REST in .NET 4 which drew heavily from the REST Starter Kit and community feedback. There is basic REST support in .NET 3.5 SP1 and you can also grab the REST Starter Kit to enable some of the features you’ll find in .NET 4. This post will cover REST in .NET 4 and Visual Studio 2010. Getting Started To get started we’ll create a basic WCF Rest Service Application using the new on-line templates option in VS 2010: When you first install a template you are prompted with this dialog: Dude Where’s my .Svc File? The WCF REST template shows us the new way we can simply build services. Before we talk about what’s there, let’s look at what is not there: The .Svc File An Interface Contract Dozens of lines of configuration that you have to change to make your service work REST in .NET 4 is greatly simplified and leverages the Web Routing capabilities used in ASP.NET MVC and other parts of the web frameworks. With REST in .NET 4 you use a global.asax to set the route to your service using the new ServiceRoute class. From there, the WCF runtime handles dispatching service calls to the methods based on the Uri Templates. global.asax using System; using System.ServiceModel.Activation; using System.Web; using System.Web.Routing; namespace Blog.WcfRest.TimeService { public class Global : HttpApplication { void Application_Start(object sender, EventArgs e) { RegisterRoutes(); } private static void RegisterRoutes() { RouteTable.Routes.Add(new ServiceRoute("TimeService", new WebServiceHostFactory(), typeof(TimeService))); } } } The web.config contains some new structures to support a configuration free deployment. Note that this is the default config generated with the template. I did not make any changes to web.config. web.config <?xml version="1.0"?> <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </modules> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/> <standardEndpoints> <webHttpEndpoint>  <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true"/> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> </configuration> Building the Time Service We’ll create a simple “TimeService” that will return the current time. Let’s start with the following code: using System; using System.ServiceModel; using System.ServiceModel.Activation; using System.ServiceModel.Web; namespace Blog.WcfRest.TimeService { [ServiceContract] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)] public class TimeService { [WebGet(UriTemplate = "CurrentTime")] public string CurrentTime() { return DateTime.Now.ToString(); } } } The endpoint for this service will be http://[machinename]:[port]/TimeService. To get the current time http://[machinename]:[port]/TimeService/CurrentTime will do the trick. The Results Are In Remember That Route In global.asax? Turns out it is pretty important. When you set the route name, that defines the resource name starting after the host portion of the Uri. Help Pages in WCF 4 Another feature that came from the starter kit are the help pages. To access the help pages simply append Help to the end of the service’s base Uri. Dropping the Soap Having dabbled with REST in the past and after using Soap for the last few years, the WCF 4 REST support is certainly refreshing. I’m currently working on some REST implementations in .NET 3.5 and VS 2008 and am looking forward to working on REST in .NET 4 and VS 2010.

Read the article

Install the Ajax Control Toolkit from NuGet

- by Stephen Walther

The Ajax Control Toolkit is now available from NuGet. This makes it super easy to add the latest version of the Ajax Control Toolkit to any Web Forms application. If you haven’t used NuGet yet, then you are missing out on a great tool which you can use with Visual Studio to add new features to an application. You can use NuGet with both ASP.NET MVC and ASP.NET Web Forms applications. NuGet is compatible with both Websites and Web Applications and it works with both C# and VB.NET applications. For example, I habitually use NuGet to add the latest version of ELMAH, Entity Framework, jQuery, jQuery UI, and jQuery Templates to applications that I create. To download NuGet, visit the NuGet website at: http://NuGet.org Imagine, for example, that you want to take advantage of the Ajax Control Toolkit RoundedCorners extender to create cross-browser compatible rounded corners in a Web Forms application. Follow these steps. Right click on your project in the Solution Explorer window and select the option Add Library Package Reference. In the Add Library Package Reference dialog, select the Online tab and enter AjaxControlToolkit in the search box: Click the Install button and the latest version of the Ajax Control Toolkit will be installed. Installing the Ajax Control Toolkit makes several modifications to your application. First, a reference to the Ajax Control Toolkit is added to your application. In a Web Application Project, you can see the new reference in the References folder: Installing the Ajax Control Toolkit NuGet package also updates your Web.config file. The tag prefix ajaxToolkit is registered so that you can easily use Ajax Control Toolkit controls within any page without adding a @Register directive to the page. <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <pages> <controls> <add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" /> </controls> </pages> </system.web> </configuration> You should do a rebuild of your application by selecting the Visual Studio menu option Build, Rebuild Solution so that Visual Studio picks up on the new controls (You won’t get Intellisense for the Ajax Control Toolkit controls until you do a build). After you add the Ajax Control Toolkit to your application, you can start using any of the 40 Ajax Control Toolkit controls in your application (see http://www.asp.net/ajax/ajaxcontroltoolkit/samples/ for a reference for the controls). <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="WebApplication1.WebForm1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>Rounded Corners</title> <style type="text/css"> #pnl1 { background-color: gray; width: 200px; color:White; font: 14pt Verdana; } #pnl1_contents { padding: 10px; } </style> </head> <body> <form id="form1" runat="server"> <div> <asp:Panel ID="pnl1" runat="server"> <div id="pnl1_contents"> I have rounded corners! </div> </asp:Panel> <ajaxToolkit:ToolkitScriptManager ID="sm1" runat="server" /> <ajaxToolkit:RoundedCornersExtender TargetControlID="pnl1" runat="server" /> </div> </form> </body> </html> The page contains the following three controls: Panel – The Panel control named pnl1 contains the content which appears with rounded corners. ToolkitScriptManager – Every page which uses the Ajax Control Toolkit must contain a single ToolkitScriptManager. The ToolkitScriptManager loads all of the JavaScript files used by the Ajax Control Toolkit. RoundedCornersExtender – This Ajax Control Toolkit extender targets the Panel control. It makes the Panel control appear with rounded corners. You can control the “roundiness” of the corners by modifying the Radius property. Notice that you get Intellisense when typing the Ajax Control Toolkit tags. As soon as you type <ajaxToolkit, all of the available Ajax Control Toolkit controls appear: When you open the page in a browser, then the contents of the Panel appears with rounded corners. The advantage of using the RoundedCorners extender is that it is cross-browser compatible. It works great with Internet Explorer, Opera, Firefox, Chrome, and Safari even though different browsers implement rounded corners in different ways. The RoundedCorners extender even works with an ancient browser such as Internet Explorer 6. Getting the Latest Version of the Ajax Control Toolkit The Ajax Control Toolkit continues to evolve at a rapid pace. We are hard at work at fixing bugs and adding new features to the project. We plan to have a new release of the Ajax Control Toolkit each month. The easiest way to get the latest version of the Ajax Control Toolkit is to use NuGet. You can open the NuGet Add Library Package Reference dialog at any time to update the Ajax Control Toolkit to the latest version.

Read the article

XNA Notes 007

- by George Clingerman

Every week I keep wondering if there’s going to be enough activity in the community to keep doing these notes on a weekly basis and every week I’m reminded of just how awesome and active the XNA community is. There’s engines being made, tutorials being created, games being crafted. There’s information being shared, questions being answered and then there’s another whole community around the Xbox LIVE Indie Games themselves. It’s really incredibly to just watch all that’s going on and I’m glad I’m playing a small part in all of this. So here’s what I noticed happening in the XNA community last week. If there’s things I’m missing, always feel free to let me know. I love learning about new corners of the XNA community that I wasn’t aware of or just have been missing! XNA Developers: Uditha Bandara held an XNA Game Development Workshops at Singapore Universities http://uditha.wordpress.com/2011/02/18/xna-game-development-workshops-at-singapore-universities-event-update/ Binary Tweed gives his talks about Indie City and gives his opinion on the false promise of digital distribution http://www.develop-online.net/news/37053/OPINION-The-false-promise-of-digital-distribution Kris Steele posts his Trivia or Die postmortem http://www.krissteele.net/blogdetails.aspx?id=246 @MadNinjaSkills (James Johnston) posts his feelings on testing for XBLIG http://www.ezmuze.co.uk/101 Simon (@DDReaper) posts hints and tips for XNA developers to help get the size of their projects down http://twitter.com/#!/DDReaper/status/38279440924545024 http://xna-uk.net/blogs/darkgenesis/archive/2011/02/17/look-at-the-size-of-that-thing.aspx Michael B. McLaughlin proving why he should be an XNA MVP posts the list of commonly used value types in XNA games http://geekswithblogs.net/mikebmcl/archive/2011/02/17/list-of-commonly-used-value-types-in-xna-games.aspx http://twitter.com/#!/mikebmcl/status/38166541354811392 Paul Powell (@ITSligoPaul) posts about a common sprite batch as a game service http://itspaulsblog.blogspot.com/2011/02/xna-common-sprite-batch-as-game-service.html @SigilXNA (John Defenbaugh) posts his new level editor video for the sequel to Opac’s Journey http://twitter.com/SigilXNA/statuses/36548174373982209 http://twitter.com/#!/SigilXNA/status/36548174373982209 http://youtu.be/QHbmxB_2AW8 @jwatte updates kW Animation for XNA 4.0 http://www.enchantedage.com/xna-animation @DSebJ posts Blender to SunBurn http://twitter.com/#!/DSebJ/status/36564920224976896 http://dsebj.evolvingsoftware.com/?p=187 Ads and WP7 Games - @mechaghost shares his revenue data for his ad based games http://www.occasionalgamer.com/2011/02/09/ads-and-wp7-games/ Xbox LIVE Indie Games (XBLIG): Steven Hurdle posts day 100 of his quest to find a fantastic XBLIG purchase every day http://writingsofmassdeduction.com/2011/02/17/day-100-radiangames-ballistic/ Xbox 360 Indie Game Buying Guide - 12 games for $60 including several Xbox LIVE Indie games! (although if the XNA community was asked we could have recommended 60 games for $60...) http://www.indiegamemag.com/xbox360-indie-games-buying-guide/ The best selling Xbox LIVE Indie games of 2010 http://www.1up.com/news/xbox-live-most-popular-games I’d buy that for a dollar! - the California Literary Review points out a few gems on the XBLIG marketplace (and other places) where you can game on the cheap. http://calitreview.com/14125 Armless Octopus Episode 39 - The Indie Gem Octocast http://www.armlessoctopus.com/2011/02/17/armless-octocast-episode-39-the-indie-gem-octocast/ Ska Studios posts a plethora of updates http://www.ska-studios.com/2011/02/11/good-morning-gato-49/ http://www.ska-studios.com/2011/02/14/vampire-smile-valentines/ http://www.ska-studios.com/2011/02/16/the-dishwasher-vs-finds-a-home/ Kotaku posts about the Xbox LIVE Indie Game that makes you go Pew Pew Pew Pew Pew Pew http://kotaku.com/#!5760632/the-game-that-makes-you-go-pew-pew-pew-pew-pew-pew-pew GameMarx continues to be active and doing a ton for the XBLIG community reviews and Top 5 indie games of the week 2/4-2/10 http://www.gamemarx.com/video/the-show/22/ep-9-february-11-2010.aspx a new podcast Xbox Indie New Releases http://twitter.com/#!/gamemarx/status/36888849107910656 http://www.gamemarx.com/news/2011/02/13/a-new-podcast-xbox-indie-new-releases.aspx @MasterBlud uploads Indocalypse XBLIG Collections #2 http://www.youtube.com/watch?v=uzCZSv075mc&feature=youtu.be&a http://twitter.com/#!/MasterBlud/status/37100029697064960 Just Press Start interviews Michael Hicks from MichaelArts, 18 year old creator of Honor in Vengeance http://justpressstart.net/?p=465 Achievement Locked interviews Kris Steele of FunInfused Games http://xboxindies.wordpress.com/2011/02/11/interview-fun-infused-games/ XNA Game Development: XNA -UK launches their XAP test service to help the XNA community http://xna-uk.net/blogs/news/archive/2011/02/18/xna-uk-xap-test-service-now-live.aspx Transmute shows off a video of the standard character editor http://www.youtube.com/watch?v=qqH6gErG948&feature=youtu.be Microsoft Tech Student introduces their first tech student of the month. Meet Daniel Van Tassel from the University of Utah and learn how he created an Xbox LIVE Indie Game using XNA Studio http://blogs.msdn.com/b/techstudent/archive/2010/12/22/introducing-our-first-tech-student-of-the-month-daniel-van-tassel.aspx XNA for Silverlight Developers Part 3 - Animation (transforms) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-3-Animation-transforms.aspx XNA for Silverlight Developers Part 4 - Animation (frame based) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-4-Animation-frame-based.aspx @suhinini tweets about an XNA Sprite Font generation tool http://twitter.com/#!/suhinini/status/36841370131890176 http://www.nubik.com/SpriteFont/ XNATouch 1.5 is out and in it’s words is faster, simpler, more reliable and has the XNA 4.0 API http://monogame.codeplex.com/releases/view/60815 IndieCity is hosting marketing workshops for Indie Developers (UK and US) http://forums.create.msdn.com/forums/p/75197/457654.aspx#457654 New York Students - Learn XNA and Silverlight for Xbox 360 and Windows Phone 7 http://forums.create.msdn.com/forums/p/72753/456964.aspx#456964 http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/learn-to-build-your-own-games-for-xbox-360-and-windows-phone-7.aspx http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/build-a-game-in-48-hours-win-a-kinect-or-windows-phone-7.aspx Extra Credits: Videogame Music http://www.escapistmagazine.com/videos/view/extra-credits/2019-Videogame-Music Steve Pavlina posts an article with useful information for all XNA/XBLIG developers http://www.stevepavlina.com/blog/2011/02/completion-vs-perfection/

Read the article

WPF Databinding- Not your fathers databinding Part 1-3

- by Shervin Shakibi

As Promised here is my advanced databinding presentation from South Florida Code camp and also Orlando Code camp. you can find the demo files here. http://ssccinc.com/wpfdatabinding.zip Here is a quick description of the first demos, there will be 2 other Blogposting in the next few days getting into more advance databinding topics. Example00 Here we have 3 textboxes, The first textbox mySourceElement Second textbox has a binding to mySourceElement and Path= Text <Binding ElementName="mySourceElement" Path="Text" /> Third textbox is also bound to the Text property but we use inline Binding <TextBlock Text="{Binding ElementName=mySourceElement,Path=Text }" Grid.Row="2" /> Here is the entire XAML <Grid > <Grid.RowDefinitions > <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <TextBox Name="mySourceElement" Grid.Row="0" TextChanged="mySourceElement_TextChanged">Hello Orlnado</TextBox> <TextBlock Grid.Row="1"> <TextBlock.Text> <Binding ElementName="mySourceElement" Path="Text" /> </TextBlock.Text> </TextBlock> <TextBlock Text="{Binding ElementName=mySourceElement,Path=Text }" Grid.Row="2" /> </Grid> </Window> Example01 we have a slider control, then we have two textboxes bound to the value property of the slider. one has its text property bound, the second has its fontsize property bound. <Grid> <Grid.RowDefinitions > <RowDefinition Height="40px" /> <RowDefinition Height="40px" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Slider Name="fontSizeSlider" Minimum="5" Maximum="100" Value="10" Grid.Row="0" /> <TextBox Name="SizeTextBox" Text="{Binding ElementName=fontSizeSlider, Path=Value}" Grid.Row="1"/> <TextBlock Text="Example 01" FontSize="{Binding ElementName=SizeTextBox, Path=Text}" Grid.Row="2"/> </Grid> Example02 very much like the previous example but it also has a font dropdown <Grid> <Grid.RowDefinitions > <RowDefinition Height="20px" /> <RowDefinition Height="40px" /> <RowDefinition Height="40px" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <ComboBox Name="FontNameList" SelectedIndex="0" Grid.Row="0"> <ComboBoxItem Content="Arial" /> <ComboBoxItem Content="Calibri" /> <ComboBoxItem Content="Times New Roman" /> <ComboBoxItem Content="Verdana" /> </ComboBox> <Slider Name="fontSizeSlider" Minimum="5" Maximum="100" Value="10" Grid.Row="1" /> <TextBox Name="SizeTextBox" Text="{Binding ElementName=fontSizeSlider, Path=Value}" Grid.Row="2"/> <TextBlock Text="Example 01" FontFamily="{Binding ElementName=FontNameList, Path=Text}" FontSize="{Binding ElementName=SizeTextBox, Path=Text}" Grid.Row="3"/> </Grid> Example03 In this example we bind to an object Employee.cs Notice we added a directive to our xaml which is clr-namespace and the namespace for our employee Class xmlns:local="clr-namespace:Example03" In Our windows Resources we create an instance of our object <Window.Resources> <local:Employee x:Key="MyEmployee" EmployeeNumber="145" FirstName="John" LastName="Doe" Department="Product Development" Title="QA Manager" /> </Window.Resources> then we bind our container to the that instance of the data <Grid DataContext="{StaticResource MyEmployee}"> <Grid.RowDefinitions> <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions > <ColumnDefinition Width="130px" /> <ColumnDefinition Width="178*" /> </Grid.ColumnDefinitions> </Grid> and Finally we have textboxes that will bind to that textbox <Label Grid.Row="0" Grid.Column="0">Employee Number</Label> <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=EmployeeNumber}"></TextBox> <Label Grid.Row="1" Grid.Column="0">First Name</Label> <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=FirstName}"></TextBox> <Label Grid.Row="2" Grid.Column="0">Last Name</Label> <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=LastName}" /> <Label Grid.Row="3" Grid.Column="0">Title</Label> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding Path=Title}"></TextBox> <Label Grid.Row="4" Grid.Column="0">Department</Label> <TextBox Grid.Row="4" Grid.Column="1" Text="{Binding Path=Department}" />

Read the article

Oracle Open World 2012: SQL Developer Recap

- by thatjeffsmith

Last week was the ‘big show’ in San Francisco. I was very happy to meet many of you in person. And many of you had questions – lots of questions! We had full or overflowing rooms for our sessions and hands-on-labs. The SQL Developer ‘booths’ were also slammed several times. So exciting to see so many of YOU excited about SQL Developer. It’s very cool to hear the stories of our tools saving you and your organizations so much time (and money!) Instead of doing a Day 0 – Day 9 recap, I thought I’d share with you the questions that I heard more than once. And just for giggles, I’ll throw in some answers as well So in no particular order… What’s the difference between Oracle SQL Developer & Oracle SQL Developer Data Modeler? Mathematically speaking – two words. But as far as the actual modeling features go, there’s no difference between the two applications. The same ‘code’ or features as it pertains to data modeling and design are in both tools. However, in SQL Developer you have all of the OTHER features fighting for real estate in the UI. So I have a general rule of thumb – if you spend MOST of your time in the database, use SQL Developer. And if you spend most of your time in the data model, run the separate and dedicated program, Oracle SQL Developer Data Modeler. Here’s a couple of screenshots to drive home the UI point: Oracle SQL Developer Oracle SQL Developer Data Modeler running INSIDE of SQL Developer. Notice how the Modeler menu items fold under the file menu? Oracle SQL Developer Data Modeler Easier to navigate and manipulate your models with the stand alone modeler. Just no worksheet to run your ad-hoc queries, etc. Don’t forget you can disable the Data Modeler inside of SQL Developer via the Extensions preference page. How can I model my table partitions? Partitioning is defined via the Physical model. So after you have finished your relational model, you need to generate a physical model. Oracle SQL Developer Data Modeler Physical Model and Partitioning Open the properties for your physical model table. Enable the ‘partitioned’ property. Once you do so, the ‘Partitioning’ page will activate. Lots and lots of partitioning support and options here But what about Interval Partitioning? An extension of range partitioning in 11gR2, we don’t currently support this partitioning scheme in SQL Developer. But we’re working on it! Can SQL Developer ignore column order when comparing models? Yes! After you start a model compare, one of your options is to disregard the order of an attribute or column definition. Tell SQL Developer you don’t care when your column shows up, just as long as it DOES show up. Wow, you got a lot of questions around modeling! Is that normal? Yes! While we appreciate that many folks inherit their applications and associated designs, new applications are being ‘born’ every day. Since both of our tools are free for anyone to design their new Oracle applications with, we attract a fair amount of attention I want to do a Hands On Lab. How do I get your software and instructional guides? Go here. Download VirtualBox. Then download the VB image. Import the appliance. Start it. Connect oracle/oracle on the OEL VM. Click on ‘Start Here’ in the desktop. Follow the instructions. If you need help, ask away! You went too fast in your Tips & Tricks session. Do you have cliff notes? Yes! And you’re SO close to finding them! Just go to my SQL Developer resources page. All of my tips are documented on this blog somewhere. I’ve indexed the most popular ones on the resource page. You can use the Search dialog on the right to find the rest. Or just send me a comment or question, and I’ll do my best to answer them as they come in.

Read the article

Social Network Updates: While You Were Busy Marketing 2

- by Mike Stiles

Since social moves at the speed of data, it’s already time for another update, as we did back in April, on the changes the various social networks have made or gone through while you were busy marketing. Facebook There’s a lot of talk Facebook’s developing a mobile product to act like Flipboard and surface news, from both users and media outlets. The biggest news was Facebook/Instagram’s introduction of 15-second videos, enhanced with with filters, to take some of Vine’s candy. You can also delete parts of videos and rerecord them, and there’s image stabilization. Facebook’s ad revenue is coming along just fine, thank you very much. 35% quarter-to-quarter growth in Q2. And it looks like new formats like Mobile App Install Ads and Unpublished Page Posts are adding to the mix. If you don’t already, you’ll soon see a little camera in comment boxes letting you insert photos right into the comments you make. The drive toward “more visual” continues. The other big news is Facebook’s adoption of our Twitter friend, the hashtag. Adding # sets apart the post topic so it can be easily found or discovered. It’s also being added to Google Plus, Tumblr, and Pinterest. Twitter Want to send someone a promoted tweet when they’re in range of your store? That could be happening by the end of this year. Some users have been seeing automatic in-stream previews of images on Twitter.com. Right now it’s images in your own tweets, but we can assume all tweets are next. Get your followers organized! Twitter raised the limit on the number of lists you can create from 20 to 1,000. They also raised the number of accounts you can have in a list from 500 to 5,000. Twitter started notifying you when someone favorites a tweet you’re mentioned in or re-tweets a tweet you re-tweeted. Anyway, it’s the first time Twitter’s notified you about indirect interactions like that. Who’s afraid of Instagram? A study shows 6-second Vine videos are being posted to Twitter at the rate of 9/second, up from 5/second 2 months ago. Vine has over 13 million users and branded Vines are 4x more likely to be shared than video ads. Google Plus Now featuring a 3-column redesigned stream, and images that take up a whole column. And photo filters Auto Highlight and Auto Awesome work to turn your photos into a real show. Google Hangouts is the workhorse for all Google messaging now, it’s not just an online chat with 9 people anymore. Google Plus Dashboard improves the connection between your company’s Google Plus business page and your Google Plus Local. Updates go out across all Google properties and you can do your managing from the dashboard. With Google Plus’ authorship system, you can build “Author Rank” based on what you write and put on the web. If your stuff is +1’ed and shared a lot, you’re the real deal and there are search result benefits. LinkedIn "Who's Viewed Your Updates" shows you what you’ve shared recently, who saw it and what they did about it in real-time. “Influencers” is, well, influential. Traffic to all LI news products has gone up 8x since it was introduced. LinkedIn is quickly figuring out how to get users to stick around awhile. You and your brand can post images and documents in status updates now. In fact, that whole “document posting” thing is making some analysts wonder if LinkedIn will drift on over to the Dropboxes and YouSendIts of the world. C’mon, admit it. Your favorite part of LinkedIn is being able to see who’s viewed your profile. Now you’ve got even more info and can see what/who you have in common. Premium users get even deeper insights about how people are finding them. If you’re a big fan of security, you’ll love that LinkedIn started offering two-factor authentication (2FA). It’s optional, but step 2 is a one-time code texted to your registered mobile. Pinterest A study showed pins have a looong shelf life compared to other social net posts. “Clicks kept coming for 30 days and beyond.” Most pins are timeless, and the infinite scroll causes people to see older pins. Is it a keeper? Pinterest jumped 82% to 54 million users in the past year. It’s valued at $2.5 billion and is one of the biggest sources of referral traffic there is. That said, CEO Ben Silbermann adds, "Right now, we don't make money." A new search feature stops you from having to endlessly scroll through your own pins looking for that waterfall picture you posted. Simply select “just my pins” in the search bar. New "Rich Pins" lets brands add info like price and availability to pins that can be updated daily via a data feed from your merchant site. Not so fast, you have to apply to Pinterest for it first. Like other social nets, Pinterest does not allow sexual content, nudity, or even partial nudity. However…some art contains nudity, and Pinterest wants to allow art. What constitutes “art” will be judged by…what we have to assume are Pinterest employees who love their job. @mikestilesPhoto: stock.xchng, Tim Marmon

Read the article

Getting the innermost .NET Exception

- by Rick Strahl

Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) { List<Exception> exceptions = new List<Exception>(); exceptions.Add(ex); Exception currentEx = ex; while (currentEx.InnerException != null) { exceptions.Add(ex); } // Reverse the order to the innermost is first exceptions.Reverse(); return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp .NET

Read the article

Gartner PCC Follow-up: Interview with Chaeny Emanavin, Usability Lead - Office of Information Develo

- by [email protected]

Last week at the Gartner Portals, Content and Collaboration conference in Baltimore, Chaeny and I co-presented on Oracle Enterprise 2.0 and BIA's Citizen Portal. Chaeny's presentation about the BIA solution was very well received and I wanted to do a follow-up interview with Chaeny to discuss more details about their solution and its Enterprise 2.0 features. Ajay: What were the main objectives for the BIA Citizen Portal? Chaeny: The BIA Citizen Portal is designed to provide all the services of the Bureau of Indian Affairs to the community of 564 federally recognized tribes that include over 1.9 million American Indians and Alaska Natives. The BIA provides the same breadth of services that the entire U.S. Federal Government provides in one small Bureau. So, we needed a solution that was flexible enough to handle content ranging from law enforcement to housing to education. Key objectives for external users was to use the Web as a communications channel and keep them informed on what services are available. We also wanted to build an internal web presence and community for BIA's 5000 employees to ensure that they update their content, leverage internal experts and create single sources of truth for key policy documents. Ajay: How is the project being implemented? Chaeny: We are using a phased approach. In phases 1 & 2, interim internal and external sites were built to ensure usability and functional requirements are being met. In Phases 3 & 4, we built out a modern internal and external presence using Oracle WebCenter Suite and Oracle Universal Content Management (UCM), including enabling delegated content management for our internal business units. Phase 4 was completed in January 2010. Phase 5 will add deeper Enterprise 2.0 collaboration capabilities to the solution. Ajay: Are you integrating any existing sites into the new solution? Chaeny: Yes, we have a SharePoint implementation that we are using for document management. We needed more precise functionality however. We found that SharePoint would let individual administrators of a SharePoint site actually create new sites. In a 3 months span, we had over 200 new sites created and most were not being used. So, we had an enormous sprawl problem. Our requirements mandated increased governance and more granular control over the creation of sites and flexible user access to content. In SharePoint this required custom code and was very time-intensive which was unfeasible given our tight deadlines. We are piloting Oracle WebCenter Spaces as our collaboration solution to mitigate these issues. However, we must integrate our existing SharePoint investment which we can do easily by using the SharePoint connectors available in Oracle WebCenter and UCM. Ajay: What were the key design parameters for your solution? Chaeny: We wanted everything driven by standards and policies. We created a cross-functional steering group called the Indian Affairs Web Council to codify policies that were baked into the system. Other key design areas were focused on security/governance, self-service content management, ease of use, integration with legacy applications and seamless single sign-on. We are using Dublin Core as our metadata standard. We also are using Java, APEX, and ADF as our development standards. Ajay: Why was it important to standardize on a platform? Chaeny: We initially looked at best-of-breed solutions, but we faced a lot of issues getting the different solutions to work together. Going with an integrated solution was more economical, easier to learn and faster to deliver the solution. Ajay: What type of legacy applications are you integrating into the portal? Chaeny: Initially we are starting with administrative apps such as people directory and user admin and then we will integrate HR and Financial applications among others. Ajay: Can you describe some of the E20 collaboration features you are putting into the solution? Chaeny: We are adding Enterprise 2.0 using Oracle WebCenter Spaces to deliver different collaboration tools such as wikis, blogs and discussion forums. Wikis to create rapid, ad hoc monthly roll-up reports; discussion forums to provide context-specific help; blogs to capture tacit organization knowledge from experts, identify gurus and turn tacit knowledge into explicit knowledge. Ajay: Are you doing anything specifically to spur adoption and usage? Chaeny: Yes, we did several things that I think helped us ramp quickly. First, we met our commitments for the new system launch date and also provided extra resources for a customer support "hotline" during the launch period. Prior to launch, we did exhaustive usability studies to capture user requirements around functionality, navigation and other key interaction areas. We also created extensive training programs so that the content managers in each business unit were comfortable using the content management tools and knew the best practices for usage. Finally, to launch the Enterprise 2.0 collaboration capabilities, we are working with a pilot group from the Division of Forestry and Wildland Fire Management of BIA. This group of people in the past have been willing early adopters and they have a strong business need to collaborate with many agencies both internal and external across State, County and other Federal jurisdictions. Their feedback is key to helping us launch Enterprise 2.0 successfully in our broader organization. Ajay: What were the biggest benefits to internal BIA employees and to the external community of users? Chaeny: For our employees, the new Enterprise 2.0-based solution will make it easier to find information; enhance employee productivity by embedding standard business processes into the system and create more of a community by creating connections with experts via social collaboration to ultimately provide better services more quickly. For the external American Indian and Alaska Native communities, we have a better relationship with the users and the new site has improved BIA's perception as a more responsive and customer-centric organization.

Read the article

Seven Worlds will collide…. High Availability BI is not such a Distant Sun.

- by Testas

Over the last 5 years I have observed Microsoft persevere with the notion of Self Service BI over a series of conferences as far back as SQLBits V in Newport. The release of SQL Server 2012, improvements in Excel and the integration with SharePoint 2010 is making this a reality. Business users are now empowered to create their own BI reports through a number of different technologies such as PowerPivot, PowerView and Report Builder. This opens up a whole new way of working; improving staff productivity, promoting efficient decision making and delivering timely business reports. There is, however; a serious question to answer. What happens should any of these applications become unavailable? More to the point, how would the business react should key business users be unable to fulfil reporting requests for key management meetings when they require it? While the introduction of self-service BI will provide instant access to the creation of management information reports, it will also cause instant support calls should the access to the data become unavailable. These are questions that are often overlooked when a business evaluates the need for self-service BI. But as I have written in other blog posts, the thirst for information is unquenchable once the business users have access to the data. When they are unable to access the information, you will be the first to know about it and will be expected to have a resolution to the downtime as soon as possible. The world of self-service BI is pushing reporting and analytical databases to the tier 1 application level for some of Coeo’s customers. A level that is traditionally associated with mission critical OLTP environments. There is recognition that by making BI readily available to the business user, provisions also need to be made to ensure that the solution is highly available so that there is minimal disruption to the business. This is where High Availability BI infrastructures provide a solution. As there is a convergence of technologies to support a self-service BI culture, there is also a convergence of technologies that need to be understood in order to provide the high availability architecture required to support the self-service BI infrastructure. While you may not be the individual that implements these components, understanding the concepts behind these components will empower you to have meaningful discussions with the right people should you put this infrastructure in place. There are 7 worlds that you will have to understand to successfully implement a highly available BI infrastructure 1. Server/Virtualised server hardware/software 2. DNS 3. Network Load Balancing 4. Active Directory 5. Kerberos 6. SharePoint 7. SQL Server I have found myself over the last 6 months reaching out to knowledge that I learnt years ago when I studied for the Windows 2000 and 2003 (MCSE) Microsoft Certified System Engineer. (To the point that I am resuming my studies for the Windows Server 2008 equivalent to be up to date with newer technologies) This knowledge has proved very useful in the numerous engagements I have undertaken since being at Coeo, particularly when dealing with High Availability Infrastructures. As a result of running my session at SQLBits X and SQL Saturday in Dublin, the feedback I have received has been that many individuals desire to understand more of the concepts behind the first 6 “worlds” in the list above. Over the coming weeks, a series of blog posts will be put on this site to help understand the key concepts of each area as it pertains to a High Availability BI Infrastructure. Each post will not provide exhaustive coverage of the topic. For example DNS can be a book in its own right when you consider that there are so many different configuration options with Forward Lookup, Reverse Lookups, AD Integrated Zones and DNA forwarders to name some examples. What I want to do is share the pertinent points as it pertains to the BI infrastructure that you build so that you are equipped with the knowledge to have the right discussion when planning this infrastructure. Next, we will focus on the server infrastructure that will be required to support the High Availability BI Infrastructure, from both a physical box and virtualised perspective. Thanks Chris

Read the article

Big Data – Buzz Words: Importance of Relational Database in Big Data World – Day 9 of 21

- by Pinal Dave

In yesterday’s blog post we learned what is HDFS. In this article we will take a quick look at the importance of the Relational Database in Big Data world. A Big Question? Here are a few questions I often received since the beginning of the Big Data Series - Does the relational database have no space in the story of the Big Data? Does relational database is no longer relevant as Big Data is evolving? Is relational database not capable to handle Big Data? Is it true that one no longer has to learn about relational data if Big Data is the final destination? Well, every single time when I hear that one person wants to learn about Big Data and is no longer interested in learning about relational database, I find it as a bit far stretched. I am not here to give ambiguous answers of It Depends. I am personally very clear that one who is aspiring to become Big Data Scientist or Big Data Expert they should learn about relational database. NoSQL Movement The reason for the NoSQL Movement in recent time was because of the two important advantages of the NoSQL databases. Performance Flexible Schema In personal experience I have found that when I use NoSQL I have found both of the above listed advantages when I use NoSQL database. There are instances when I found relational database too much restrictive when my data is unstructured as well as they have in the datatype which my Relational Database does not support. It is the same case when I have found that NoSQL solution performing much better than relational databases. I must say that I am a big fan of NoSQL solutions in the recent times but I have also seen occasions and situations where relational database is still perfect fit even though the database is growing increasingly as well have all the symptoms of the big data. Situations in Relational Database Outperforms Adhoc reporting is the one of the most common scenarios where NoSQL is does not have optimal solution. For example reporting queries often needs to aggregate based on the columns which are not indexed as well are built while the report is running, in this kind of scenario NoSQL databases (document database stores, distributed key value stores) database often does not perform well. In the case of the ad-hoc reporting I have often found it is much easier to work with relational databases. SQL is the most popular computer language of all the time. I have been using it for almost over 10 years and I feel that I will be using it for a long time in future. There are plenty of the tools, connectors and awareness of the SQL language in the industry. Pretty much every programming language has a written drivers for the SQL language and most of the developers have learned this language during their school/college time. In many cases, writing query based on SQL is much easier than writing queries in NoSQL supported languages. I believe this is the current situation but in the future this situation can reverse when No SQL query languages are equally popular. ACID (Atomicity Consistency Isolation Durability) – Not all the NoSQL solutions offers ACID compliant language. There are always situations (for example banking transactions, eCommerce shopping carts etc.) where if there is no ACID the operations can be invalid as well database integrity can be at risk. Even though the data volume indeed qualify as a Big Data there are always operations in the application which absolutely needs ACID compliance matured language. The Mixed Bag I have often heard argument that all the big social media sites now a days have moved away from Relational Database. Actually this is not entirely true. While researching about Big Data and Relational Database, I have found that many of the popular social media sites uses Big Data solutions along with Relational Database. Many are using relational databases to deliver the results to end user on the run time and many still uses a relational database as their major backbone. Here are a few examples: Facebook uses MySQL to display the timeline. (Reference Link) Twitter uses MySQL. (Reference Link) Tumblr uses Sharded MySQL (Reference Link) Wikipedia uses MySQL for data storage. (Reference Link) There are many for prominent organizations which are running large scale applications uses relational database along with various Big Data frameworks to satisfy their various business needs. Summary I believe that RDBMS is like a vanilla ice cream. Everybody loves it and everybody has it. NoSQL and other solutions are like chocolate ice cream or custom ice cream – there is a huge base which loves them and wants them but not every ice cream maker can make it just right for everyone’s taste. No matter how fancy an ice cream store is there is always plain vanilla ice cream available there. Just like the same, there are always cases and situations in the Big Data’s story where traditional relational database is the part of the whole story. In the real world scenarios there will be always the case when there will be need of the relational database concepts and its ideology. It is extremely important to accept relational database as one of the key components of the Big Data instead of treating it as a substandard technology. Ray of Hope – NewSQL In this module we discussed that there are places where we need ACID compliance from our Big Data application and NoSQL will not support that out of box. There is a new termed coined for the application/tool which supports most of the properties of the traditional RDBMS and supports Big Data infrastructure – NewSQL. Tomorrow In tomorrow’s blog post we will discuss about NewSQL. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Integrate BING API for Search inside ASP.Net web application

- by sreejukg

As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

Read the article

SanjayP’s venture after Microsoft involves no Microsoft

- by eddraper

When I was at Microsoft, I always found Sanjay Parthasarathy to be a bright and passionate leader. While he was a bit disconnected at times with what was really going on out in the trenches, I always thought he was true believer in what we in Developer Platform and Evangelism (DPE) were doing. He got it. He had started DPE and kicked a lot of doors down up in Redmond to make it happen. Back in the early 2000s, battles over platform choices at large customers was trench warfare… bayonets and hand grenades at the P-Code level. This model was not at all suited to Microsoft’s org structure at the time. While there were plenty of people fully able to have competitive conversations around Windows Server, or AD, or Exchange, or the desktop, there weren’t many that could have deep technical conversations around Java vs .NET and the platform “stack” as a cohesive, unified unit of value. This task fell to DPE. Sanjay ended up leaving Microsoft a number of months before me in 2009 and I remember thinking these exact words: “holy shit, SanjayP left Microsoft.” When SanjayP left DPE years before that, Sheila Gulati had stepped into his shoes and I thought we where starting to miss a beat. Sheila had built an amazing business at Microsoft India, but I don’t recall being inspired by her as a leader. SanjayP’s talks felt like the opening scene of “Patton” with George C. Scott pacing in front of the American flag. Sheila was a voice on a con-call. When she moved on in 2007, Walid Abu-Hadba was given the reigns. Personally, I don’t ever recall even seeing his face. I think I might recall hearing his voice on some con-calls, but for all intents and purposes he was invisible to me. Perhaps this was the beginning of my carelessness around seeking “visibility.” Fast forward to Build 2011. First off, we have no PDC – we have Build. Microsoft had made an 11 year investment by this time in building an organization to make its technology relevant to developers. One would think such an org would be in the driver’s seat of such an event, but we see Windows product group people on the podiums. Watching, I could see the messaging unfold… but no story. It was like the old days. Demos and PowerPoints by team members building the tech, and in many cases VPs. The ensuing confusion is almost legendary now. Windows 8 was, and is, a pretty big deal… but who is telling the story – not just features and benefits, but the story around how it all fits together. Having been out of Microsoft for two years now, and looking in, I can only conclude that the “DPE of old” has at best been emasculated, and at worst been completely marginalized by internal politics, or perhaps the eternal march of the corporate entropy generator that resides at all large companies. I don’t think this is a good thing for anyone. And now, back to Sanjay who is the father of Microsoft DPE… I noticed that he has moved back to India and is doing start-up work. His current company Indix looks to be doing some interesting things with “big data” and here’s their stack: Nary a trace of anything Microsoft. What could account for this? I wonder…. Better availability of labor and expertise in India for this stack? Donno, but even in India, leet R and Hadoop skills have to be hard to find. Technical superiority? This, I sincerely doubt. This stack, with SanjayP’s name as CEO leaves me with an unsettling feeling. If he did believe, he no longer does. One doesn’t place bets with real money on things they don’t believe in. Perhaps he never did believe, and was a corporate creature seeking to find a niche for himself after which he manipulated me and others. Or perhaps… anger… be it passive aggression or an outright “in your face F*** you” to his former masters. I guess in the end, only he knows the true reason… But I have my theory...

Read the article

Searching for the last logon of users in Active Directory

- by Robert May

I needed to clean out a bunch of old accounts at Veracity Solutions, and wanted to delete those that hadn’t used their account in more than a year. I found that AD has a property on objects called the lastLogonTimestamp. However, this value isn’t exposed to you in any useful fashion. Sure, you can pull up ADSI Edit and and eventually get to it there, but it’s painful. I spent some time searching, and discovered that there’s not much out there to help, so I thought a blog post showing exactly how to get at this information would be in order. Basically, what you end up doing is using System.DirectoryServices to search for accounts and then filtering those for users, doing some conversion and such to make it happen. Basically, the end result of this is that you get a list of users with their logon information and you can then do with that what you will. I turned my list into an observable collection and bound it into a XAML form. One important note, you need to add a reference to ActiveDs Type Library in the COM section of the world in references to get to LargeInteger. Here’s the class: namespace Veracity.Utilities { using System; using System.Collections.Generic; using System.DirectoryServices; using ActiveDs; using log4net; /// <summary> /// Finds users inside of the active directory system. /// </summary> public class UserFinder { /// <summary> /// Creates the default logger /// </summary> private static readonly ILog log = LogManager.GetLogger(typeof(UserFinder)); /// <summary> /// Finds last logon information /// </summary> /// <param name="domain">The domain to search.</param> /// <param name="userName">The username for the query.</param> /// <param name="password">The password for the query.</param> /// <returns>A list of users with their last logon information.</returns> public IList<UserLoginInformation> GetLastLogonInformation(string domain, string userName, string password) { IList<UserLoginInformation> result = new List<UserLoginInformation>(); DirectoryEntry entry = new DirectoryEntry(domain, userName, password, AuthenticationTypes.Secure); DirectorySearcher directorySearcher = new DirectorySearcher(entry); directorySearcher.PropertyNamesOnly = true; directorySearcher.PropertiesToLoad.Add("name"); directorySearcher.PropertiesToLoad.Add("lastLogonTimeStamp"); SearchResultCollection searchResults; try { searchResults = directorySearcher.FindAll(); } catch (System.Exception ex) { log.Error("Failed to do a find all.", ex); throw; } try { foreach (SearchResult searchResult in searchResults) { DirectoryEntry resultEntry = searchResult.GetDirectoryEntry(); if (resultEntry.SchemaClassName == "user") { UserLoginInformation logon = new UserLoginInformation(); logon.Name = resultEntry.Name; PropertyValueCollection timeStampObject = resultEntry.Properties["lastLogonTimeStamp"]; if (timeStampObject.Count > 0) { IADsLargeInteger logonTimeStamp = (IADsLargeInteger)timeStampObject[0]; long lastLogon = (long)((uint)logonTimeStamp.LowPart + (((long)logonTimeStamp.HighPart) << 32)); logon.LastLogonTime = DateTime.FromFileTime(lastLogon); } result.Add(logon); } } } catch (System.Exception ex) { log.Error("Failed to iterate search results.", ex); throw; } return result; } } } Some important things to note: Username and Password can be set to null and if your computer us part of the domain, this may still work. Domain should be set to something like LDAP://servername/CN=Users,CN=Domain,CN=com You’re actually getting a com object back, so that’s why the LongInteger conversions are happening. The class for UserLoginInformation looks like this: namespace Veracity.Utilities { using System; /// <summary> /// Represents user login information. /// </summary> public class UserLoginInformation { /// <summary> /// Gets or sets Name /// </summary> public string Name { get; set; } /// <summary> /// Gets or sets LastLogonTime /// </summary> public DateTime LastLogonTime { get; set; } /// <summary> /// Gets the age of the account. /// </summary> public TimeSpan AccountAge { get { TimeSpan result = TimeSpan.Zero; if (this.LastLogonTime != DateTime.MinValue) { result = DateTime.Now.Subtract(this.LastLogonTime); } return result; } } } } I hope this is useful and instructive. Technorati Tags: Active Directory

Read the article

Upgrading VSIX extensions from VS2012 to VS2013

- by Tarun Arora [Microsoft MVP]

Originally posted on: http://geekswithblogs.net/TarunArora/archive/2013/06/27/upgrading-vsix-extensions-from-vs2012-to-vs2013.aspx As consumers of your Visual Studio extensions start to move over to VS 2013, you will have to upgrade the Visual Studio extensions you build for Visual Studio 2012 to Visual Studio 2013 and republish to the Visual Studio extension gallery. Failing which, it will not be possible for your consumers to install and use your extensions on Visual Studio 2013. Objective In this blog post, I’ll show you how simple it is to upgrade your Visual Studio 2012 extension to Visual Studio 2013. There aren’t any reported breaking changes between VS 2012 SDK and VS 2013 SDK, the upgrade usually involves, rebuilding the extension against VS 2013 SDK and updating the vsix manifest file. Walkthrough Download the Visual Studio 2013 SDK - You will need to download the Visual Studio 2013 SDK in order to open up the Visual Studio extension project in Visual Studio 2013. The SDK can be downloaded from here. Install the SDK before you proceed. 2. Once the VS 2013 SDK has been installed, open up your package project. For the purposes of this blog post, I’ll open up the Avanade Extension – Software Inventory in Visual Studio 2013. You will notice that Visual Studio doesn’t load the project but let’s you know that the project needs to be Migrated. 3. Right click the project and choose the option ‘Reload Project’ from the Context Menu. 4. Choosing the Reload Project option brings up an upgrade window, telling you that the upgrade is a one way only upgrade i.e. the project will be changed to work with Visual Studio 2013 and you will not be able to open the project up in Visual Studio 2012. My recommendation would be to create a Visual Studio 2013 branch and upgrading the project in that branch only, so if you need to go back to Visual Studio 2012 project at some point, you have a handy reference in a separate branch. 5. Upon clicking Ok, the project is updated. See below, the following changes are made at the time of upgrade, - The runtime version is updated in the Resources.Designer.cs file - The Minimum version of Visual Studio in the package project file is changed from 11.0 to 12.0 6. Reference VS 2013 dll’s rather than VS 2012 dll’s. So reference Microsoft.TeamFoundation.Client.dll and Microsoft.TeamFoundation.Controls.dll from C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\ReferenceAssemblies\v2.0 and C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\ReferenceAssemblies\v4.5. If you have any other API references, then change the references to point to VS 2013 instead of VS 2012. 7. Rebuild your solution to ensure there are no breaking changes. Success! 8. Update VSIX Manifest file (the file source.extnsion.vsixmanifest contains the meta data for your VSIX). - Update the Install Targets from 11.0 to 12.0. This basically enforces that the extension can be installed on Visual Studio 2013 version of Visual Studio. - Update the Dependencies from Visual Studio MPF 11.0 to Visual Studio MPF 12.0 9. Rebuild the solution and open up the bin folder for the Package project and look for the file *.vsix file [Microsoft Visual Studio Extension]. - This is basically the installer for your extension. - Double click the installer to launch the installer wizard. Viola! You can see the package installation wizard opens up and gives you the option to install the extension for Visual Studio 2013. - Click Install to Continue - Note – If you run into the exception “23/06/2013 10:42:18 - Install Error : Microsoft.VisualStudio.ExtensionManager.InstallByMsiException: The InstalledByMSI element in extension Avanade Extensions cannot be 'true' when installing an extension through the Extensions and Updates Installer. The element can only be 'true' when an MSI lays down the extension manifest file.” Ensure you have the option “This VSIX is installed by Windows Installer” unchecked in the Install Targets tab. 10. Verifying that the extension has installed correctly. - Open Extension Manager and verify that the installed extension shows up in the extension manager “list of installed VSIX”. 11. First Look at the updated Extension - The links have now been moved to the context menu, so to see the navigation links, you’ll have to right click on the icon and select the option from the context menu. Note – The Avanade Extension being used in the demo has been developed by Utkarsh and Tarun. The Software Inventory Extension for Visual Studio 2012… allows you to see the list of Software installed on the hosted build server right from with in Visual Studio, the extension also allows you to export this list to excel. More details on how this has been implemented can be found here. I hope you found this useful. In case you have any questions or feedback, feel free to reach out on Visual Studio extensibility MSDN forums or via Microsoft Visual Studio feedback forum. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

Read the article

Big Data – Role of Cloud Computing in Big Data – Day 11 of 21

- by Pinal Dave

In yesterday’s blog post we learned the importance of the NewSQL. In this article we will understand the role of Cloud in Big Data Story What is Cloud? Cloud is the biggest buzzword around from last few years. Everyone knows about the Cloud and it is extremely well defined online. In this article we will discuss cloud in the context of the Big Data. Cloud computing is a method of providing a shared computing resources to the application which requires dynamic resources. These resources include applications, computing, storage, networking, development and various deployment platforms. The fundamentals of the cloud computing are that it shares pretty much share all the resources and deliver to end users as a service. Examples of the Cloud Computing and Big Data are Google and Amazon.com. Both have fantastic Big Data offering with the help of the cloud. We will discuss this later in this blog post. There are two different Cloud Deployment Models: 1) The Public Cloud and 2) The Private Cloud Public Cloud Public Cloud is the cloud infrastructure build by commercial providers (Amazon, Rackspace etc.) creates a highly scalable data center that hides the complex infrastructure from the consumer and provides various services. Private Cloud Private Cloud is the cloud infrastructure build by a single organization where they are managing highly scalable data center internally. Here is the quick comparison between Public Cloud and Private Cloud from Wikipedia: Public Cloud Private Cloud Initial cost Typically zero Typically high Running cost Unpredictable Unpredictable Customization Impossible Possible Privacy No (Host has access to the data Yes Single sign-on Impossible Possible Scaling up Easy while within defined limits Laborious but no limits Hybrid Cloud Hybrid Cloud is the cloud infrastructure build with the composition of two or more clouds like public and private cloud. Hybrid cloud gives best of the both the world as it combines multiple cloud deployment models together. Cloud and Big Data – Common Characteristics There are many characteristics of the Cloud Architecture and Cloud Computing which are also essentially important for Big Data as well. They highly overlap and at many places it just makes sense to use the power of both the architecture and build a highly scalable framework. Here is the list of all the characteristics of cloud computing important in Big Data Scalability Elasticity Ad-hoc Resource Pooling Low Cost to Setup Infastructure Pay on Use or Pay as you Go Highly Available Leading Big Data Cloud Providers There are many players in Big Data Cloud but we will list a few of the known players in this list. Amazon Amazon is arguably the most popular Infrastructure as a Service (IaaS) provider. The history of how Amazon started in this business is very interesting. They started out with a massive infrastructure to support their own business. Gradually they figured out that their own resources are underutilized most of the time. They decided to get the maximum out of the resources they have and hence they launched their Amazon Elastic Compute Cloud (Amazon EC2) service in 2006. Their products have evolved a lot recently and now it is one of their primary business besides their retail selling. Amazon also offers Big Data services understand Amazon Web Services. Here is the list of the included services: Amazon Elastic MapReduce – It processes very high volumes of data Amazon DynammoDB – It is fully managed NoSQL (Not Only SQL) database service Amazon Simple Storage Services (S3) – A web-scale service designed to store and accommodate any amount of data Amazon High Performance Computing – It provides low-tenancy tuned high performance computing cluster Amazon RedShift – It is petabyte scale data warehousing service Google Though Google is known for Search Engine, we all know that it is much more than that. Google Compute Engine – It offers secure, flexible computing from energy efficient data centers Google Big Query – It allows SQL-like queries to run against large datasets Google Prediction API – It is a cloud based machine learning tool Other Players Besides Amazon and Google we also have other players in the Big Data market as well. Microsoft is also attempting Big Data with the Cloud with Microsoft Azure. Additionally Rackspace and NASA together have initiated OpenStack. The goal of Openstack is to provide a massively scaled, multitenant cloud that can run on any hardware. Thing to Watch The cloud based solutions provides a great integration with the Big Data’s story as well it is very economical to implement as well. However, there are few things one should be very careful when deploying Big Data on cloud solutions. Here is a list of a few things to watch: Data Integrity Initial Cost Recurring Cost Performance Data Access Security Location Compliance Every company have different approaches to Big Data and have different rules and regulations. Based on various factors, one can implement their own custom Big Data solution on a cloud. Tomorrow In tomorrow’s blog post we will discuss about various Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Search Results

Search found 5886 results on 236 pages for 'ad cs'.

Page 204/236 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211 | Next Page >

- by Morpheu5

- by Oliver

- by germandb

- by numerical25

- by TheOnly92

- by lina

- by AdamSane

- by Shuvo

- by Stephen Walther

- by Daniel Lackey

- by AngelEyes

- by Stephen Walther

- by George Clingerman

- by Shervin Shakibi

- by thatjeffsmith

- by Mike Stiles

- by Rick Strahl

- by [email protected]

- by Testas

- by Pinal Dave

- by sreejukg

- by eddraper

- by Robert May

- by Tarun Arora [Microsoft MVP]

- by Pinal Dave

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211 | Next Page >