Search Results

Search found 5734 results on 230 pages for 'forward declarations'.

Page 213/230 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • What's up with LDoms: Part 4 - Virtual Networking Explained

    - by Stefan Hinker
    I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking.  Basic connectivity as we've seen it in the first, simple example, is easy enough.  But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now.   In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only.  Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices.  The virtual switch should be seen just like a real ethernet switch.  It "runs" in the service domain and moves ethernet packets back and forth.  A virtual network device is plumbed in the guest domain.  It corresponds to a physical network device in the real world.  There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch.  In the virtual world, you do the same:  You create a virtual network device for your guest and connect it to a virtual switch in a service domain.  The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices.  Don't be confused, it's rather straight forward, really.  Let's start with the simple case, and work our way to some more sophisticated options later on.  In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment.  In the real world, you'd connect each of these systems to the same ethernet switch.  So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2.  In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch.  We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch.  They can now communicate with each other and with any system reachable via nxge2.  If primary were running Solaris 10, communication with the guests would not be possible.  This is different with Solaris 11, please see the Admin Guide for details.  Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one.  It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there.  However, if we want to do this manually, we can also do that.  (One reason might be firewall rules that work on MAC addresses.)  So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver.  In Solaris 10, they'd appear as "vnet0".  Solaris 11 would apply it's usual vanity naming scheme.  We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal.  In many cases, using Jumbo Frames helps increase throughput performance.  By default, these interfaces will run with the standard ethernet MTU of 1500 bytes.  To change this,  it is usually sufficient to set the desired MTU for the virtual switch.  This will automatically set the same MTU for all vnet devices attached to that switch.  Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000.  Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times.  As always, keeping a configuration simple will help avoid errors of all kind.  Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable.  And as such, this concept needs to be carried over into the virtual world.  Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44.  There might also be other VLANs on the wire, but the vswitch will ignore all those packets.  We also have two vnet devices, one for mars and one for venus.  Venus will see traffic from VLANs 33 and 44 only.  For VLAN 44, venus will need to configure a tagged interface "vnet44000".  For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic.  This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33.  Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44.  On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system.  It's the "id=<somenumber>" option available for both vswitches and vnet devices.  Normally, Solaris in the guest would enumerate network devices sequentially.  However, it has ways of remembering this initial numbering.  This is good in the physical world.  In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change.  Configuration confusion will follow suit.  To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far.  Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above.  I hope this is useful and, as always, I welcome any comments.

    Read the article

  • top Tweets SOA Partner Community – September 2012

    - by JuergenKress
    Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity OracleBlogs ?Oracle SOA Suite for healthcare integration Dashboard http://ow.ly/1mcJvp SOA Community ?Lost in Translation &ndash; Common Mistakes Interpreting Patterns &ndash; Mark Simpson, Griffiths-Waite @ SOA, Cloud & Service… ServiceTechSymposium Matthias Zieger, Accenture just added to the agenda to co-present: "Service Modeling & BPM Business Value Patterns" http://ow.ly/ddu7A ServiceTechSymposium ?Newly updated session title and abstract: "Big Data and its impact on SOA", by Demed L'Her, Oracle. http://ow.ly/diOq2 Deepak Arora ?To PaaS or SaaS - the latest discussions with customers using SOA Suite - what are your thoughts #soa #soacommunity SOA Community top Tweets SOA Partner Community July 2012 - are you one of them? If yes please rt! https://soacommunity.wordpress.com/2012/08/28/top-tweets-soa-partner-community-august-2012/ … #soacommunity Sandor Nieuwenhuijs Checkout the BeNeLux Architectural Networking Event during Oracle Open World - meet your peers and the experts http://www.ddg-servicecenter.com/networkmanager/oow/architect/default.aspx … SOA Community ?top Tweets SOA Partner Community &ndash; August 2012 http://wp.me/p10C8u-uf SOA Community ?Follow SOA Community on facebook http://www.facebook.com/soacommunity #soacommunity SOA Community ?New Service to promote Your SOA & BPM events at http://oracle.com/events for SOA & BPM Specialized Partners Only! #soacommunity #opn #oracle Jan van Zoggel ?Hotel check, flight check, overview of sessions to visit check http://jvzoggel.wordpress.com/2012/08/27/soa-cloud-servicetech-symposium/ … I'm ready for SOA, Cloud & Service Technology Symposium SOA Community SOA & BPM Specialized Partners Only! New Service to Promote Your SOA & BPM Events at http://oracle.com/events http://wp.me/p10C8u-sH SOA Community Call for content for the next community newsletter. Do you want to publish your success & best practice? Send it @soacommunity #soacommunity SOA Community SOA Adoption in the Brazilian Ministry of Health - Case Study by Ricardo Puttini, University of Brasilia @ SOA, Cloud & Service… Jan van Zoggel ?Just registered for the 5th International SOA, Cloud & Service Technology Symposium in London. Looking forward to it. http://www.servicetechsymposium.com/ OTNArchBeat ?Want to prepare for Oracle SOA Specialization? @t_winterberg offers a suggestion. http://pub.vitrue.com/5Hqu OTNArchBeat ?Oracle BPM enable BAM | @deltalounge http://pub.vitrue.com/BCwj SOA Community Presentations & Training material OFM Summer Camps & Impressions & Feedback http://wp.me/p10C8u-sF Emiel Paasschens Nice! Pdf document on how to use a #Oracle #SOA Suite Domain Value Map (DVM) in the OSB: http://bit.ly/RzyS9w #yam OracleBlogs ?Using Cloud OER to Find Fusion Applications On-Premise Service Concrete WSDL URL http://ow.ly/1m4lz7 demed ?Free VIP pass for @techsymp if you are in London Sep. 24-25. Be the first one to retweet this and I'll DM you details! http://www.servicetechsymposium.com/speaker_bios.php?id=demed_lher … Jan van Zoggel blogpost: Oracle Service Bus duplicate message check using Oracle Coherence caching http://jvzoggel.wordpress.com/2012/08/20/osb-duplicate-message-with-coherence/ … OTNArchBeat ?Oracle Service Bus duplicate message check using Coherence | @jvzoggel http://pub.vitrue.com/ckY8 Oracle UPK & Tutor Synaptis and Oracle Present: Leveraging UPK Throughout the Project Lifecycle: Leveraging UPK throughout the Proj... http://bit.ly/OS2Rbg Rolando Carrasco ?New entry @ oracleradio http://bit.ly/SEvwwS @soacommunity @oracleace How to identify duplicated messages on Oracle SOA SUITE? SOA Community ?Business Driven Development (BDD) Demo Now Available! http://wp.me/p10C8u-sf OTNArchBeat ?Installing Oracle SOA Suite10g on Oracle Enterprise Linux | @lonnekedikmans http://pub.vitrue.com/BEyD OTNArchBeat ?Best practices for Oracle real-time data integration | Frank Ohlhorst http://pub.vitrue.com/1fH1 ServiceTechSymposium ?New OTN podcast featuring speakers Thomas Erl, Tim Hall and Demed L’Her just published. Tune into 1st 3 parts here: http://ow.ly/d1RRn OTNArchBeat ?SOA, Cloud, and Service Technologies - Part 4 of 4 - Best selling SOA author Thomas Erl talks about the latest title... http://ow.ly/1m0txY SOA Community Win a free conference pass for the SOA, Cloud + Service Technology Symposium &ndash; become a soacommunity facebook fan!… Lonneke Dikmans VENNSTER BLOG: Installing Oracle SOA Suite10g on Oracle Enterpris... http://blog.vennster.nl/2012/08/installing-oracle-soa-suite-10g-on.html?spref=tw … PeterPaul vande Beek published a blog on exporting Oracle #BPM metrics to a #DWH http://www.deltalounge.net/wpress/2012/08/export-oracle-bpm-metrics-to-a-data-warehouse/ … #soacommunity SOA Community ?Do you follow us on facebook http://www.facebook.com/soacommunity #soacommunity C2B2 Consulting ?Cloud-based Enterprise Architecture by Steve Millidge, C2B2 Consulting @ SOA, Cloud &amp; Service … http://wp.me/p10C8u-sv via @soacommunity Gertjan van het Hof Storing SCA Metadata in the Oracle Metadata Services Repository http://www.oracle.com/technetwork/articles/soa/fonnegra-storing-sca-metadata-1715004.html?msgid=3-6903117805 … arjankramer ?Encrypted OSB Service account passwords http://dlvr.it/20hbNV Richard van Tilborg BPM the Battle http://lnkd.in/yFAJaW OTNArchBeat Using Cloud OER to Find Fusion Applications On-Premise Service Concrete WSDL URL | @RahejaRajesh http://pub.vitrue.com/YDCD SOA Proactive ?Webcast: Introduction to SOA Human Workflow, 8/23, 10 AM EDT. Register @ http://bit.ly/Nx77sY Lucas Jellema ?Programmatically admnistration of OSB using JXM & MBeans. Interesting example is given in https://blogs.oracle.com/ateamsoab2b/entry/automatic_disabling_proxy_service_when … orclateamsoa ?A-Team Blog #ateam: Automatically Disable Proxy Service to avoid overloading OSB http://ow.ly/1lXGKV Atul_Kumar ?Oracle Enterprise Gateway – OEG 11gR1 (11.1.1.*) for beginners http://goo.gl/fb/EJboE Estafet Limited Advanced SOA Boot camp @soacommunity in Munich was excellent.@wlscommunity Learnt a lot and liked the format. SOA Community Oracle Fusion Applications Design Patterns Now Available For Developers by Ultan O'Broin http://wp.me/p10C8u-sd SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • LLBLGen Pro v3.1 released!

    - by FransBouma
    Yesterday we released LLBLGen Pro v3.1! Version 3.1 comes with new features and enhancements, which I'll describe briefly below. v3.1 is a free upgrade for v3.x licensees. What's new / changed? Designer Extensible Import system. An extensible import system has been added to the designer to import project data from external sources. Importers are plug-ins which import project meta-data (like entity definitions, mappings and relational model data) from an external source into the loaded project. In v3.1, an importer plug-in for importing project elements from existing LLBLGen Pro v3.x project files has been included. You can use this importer to create source projects from which you import parts of models to build your actual project with. Model-only relationships. In v3.1, relationships of the type 1:1, m:1 and 1:n can be marked as model-only. A model-only relationship isn't required to have a backing foreign key constraint in the relational model data. They're ideal for projects which have to work with relational databases where changes can't always be made or some relationships can't be added to (e.g. the ones which are important for the entity model, but are not allowed to be added to the relational model for some reason). Custom field ordering. Although fields in an entity definition don't really have an ordering, it can be important for some situations to have the entity fields in a given order, e.g. when you use compound primary keys. Field ordering can be defined using a pop-up dialog which can be opened through various ways, e.g. inside the project explorer, model view and entity editor. It can also be set automatically during refreshes based on new settings. Command line relational model data refresher tool, CliRefresher.exe. The command line refresh tool shipped with v2.6 is now available for v3.1 as well Navigation enhancements in various designer elements. It's now easier to find elements like entities, typed views etc. in the project explorer from editors, to navigate to related entities in the project explorer by right clicking a relationship, navigate to the super-type in the project explorer when right-clicking an entity and navigate to the sub-type in the project explorer when right-clicking a sub-type node in the project explorer. Minor visual enhancements / tweaks LLBLGen Pro Runtime Framework Entity creation is now up to 30% faster and takes 5% less memory. Creating an entity object has been optimized further by tweaks inside the framework to make instantiating an entity object up to 30% faster. It now also takes up to 5% less memory than in v3.0 Prefetch Path node merging is now up to 20-25% faster. Setting entity references required the creation of a new relationship object. As this relationship object is always used internally it could be cached (as it's used for syncing only). This increases performance by 20-25% in the merging functionality. Entity fetches are now up to 20% faster. A large number of tweaks have been applied to make entity fetches up to 20% faster than in v3.0. Full WCF RIA support. It's now possible to use your LLBLGen Pro runtime framework powered domain layer in a WCF RIA application using the VS.NET tools for WCF RIA services. WCF RIA services is a Microsoft technology for .NET 4 and typically used within silverlight applications. SQL Server DQE compatibility level is now per instance. (Usable in Adapter). It's now possible to set the compatibility level of the SQL Server Dynamic Query Engine (DQE) per instance of the DQE instead of the global setting it was before. The global setting is still available and is used as the default value for the compatibility level per-instance. You can use this to switch between CE Desktop and normal SQL Server compatibility per DataAccessAdapter instance. Support for COUNT_BIG aggregate function (SQL Server specific). The aggregate function COUNT_BIG has been added to the list of available aggregate functions to be used in the framework. Minor changes / tweaks I'm especially pleased with the import system, as that makes working with entity models a lot easier. The import system lets you import from another LLBLGen Pro v3 project any entity definition, mapping and / or meta-data like table definitions. This way you can build repository projects where you store model fragments, e.g. the building blocks for a customer-order system, a user credential model etc., any model you can think of. In most projects, you'll recognize that some parts of your new model look familiar. In these cases it would have been easier if you would have been able to import these parts from projects you had pre-created. With LLBLGen Pro v3.1 you can. For example, say you have an Oracle schema called CRM which contains the bread 'n' butter customer-order-product kind of model. You create an entity model from that schema and save it in a project file. Now you start working on another project for another customer and you have to use SQL Server. You also start using model-first development, so develop the entity model from scratch as there's no existing database. As this customer also requires some CRM like entity model, you import the entities from your saved Oracle project into this new SQL Server targeting project. Because you don't work with Oracle this time, you don't import the relational meta-data, just the entities, their relationships and possibly their inheritance hierarchies, if any. As they're now entities in your project you can change them a bit to match the new customer's requirements. This can save you a lot of time, because you can re-use pre-fab model fragments for new projects. In the example above there are no tables yet (as you work model first) so using the forward mapping capabilities of LLBLGen Pro v3 creates the tables, PK constraints, Unique Constraints and FK constraints for you. This way you can build a nice repository of model fragments which you can re-use in new projects.

    Read the article

  • Top tweets SOA Partner Community – October 2012

    - by JuergenKress
    Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community Deploying Fusion Order Demo on 11.1.1.6 by Antony Reynolds http://wp.me/p10C8u-vA leonsmiers ?Cant wait to test it >> 't waiRT @OracleSOA: Case Management patterns, session coverage from #OOW #OracleBPM #ACM #BPM http://bit.ly/OdcZL6 Danilo Schmiedel Bye bye San Francisco. #oow was a great conference in a wonderful city! Thanks! @soacommunity pic.twitter.com/lcYSe9xC OPITZ CONSULTING ?The Journey towards #Oracle #BPM @OpenWorld 2012 - Slides by @t_winterberg & H. Normann: http://ow.ly/edkWE #oow demed Full house at the SOA Customer Advisory Board! #oow12 http://instagr.am/p/QX9B8eLMLS/ Danilo Schmiedel "@whitehorsesnl: Had some great talks with the BPM guys at the DEMOgrounds. It is one of the best things at #oow" -> I agree!! @soacommunity Mark Simpson ?Fusion Middleware Global Innovation Awards: nice to pick up a soa and bpm with our customer. #oow Mark Simpson ?RT @SOASimone: #oraclesoa #oow hands on lab fully booked pic.twitter.com/pwI94Ew7 <--quick, provision some more compute power on the cloud! Oracle SOA ?Join us for BPM and Analytics: Process Dashboards. BAM, and Intelligent OptimizationMoscone South - 308#OracleBPM #OOW Oracle SOA ?Real-time public safety demo! License plate recognition and processing in London via Oracle Event Processing. #oow pic.twitter.com/WufesDBq Marc ?Nice session on customer success stories on #SOA11g on with @SOASimone Pro and cons and architectural overview. #oow pic.twitter.com/bzuhsujm Lucas Jellema Full length Keynote on Middleware #oow : http://medianetwork.oracle.com/video/player/1873556035001 … #oow_amis OracleBlogs ?Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers? http://ow.ly/2stVQ0 OracleBlogs ?Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications http://ow.ly/2suhzf Ronald Luttikhuizen ?VENNSTER BLOG | Presentations at OpenWorld 2012 | http://blog.vennster.nl/2012/10/presentations-at-openworld-2012.html … Andrejus Baranovskis @dschmied @soacommunity next OOW for sure, and may be SOA community event ! @soacommunity Danilo Schmiedel ?@andrejusb Thanks Andrejus - I really enjoyed having a session with you at #oow. When is next time :-) ? @soacommunity Lionel Dubreuil ?@soacommunity #oow12 Today-1:15pm-Marriott Marquis Salon 7 Jump-starting Integration with Oracle Foundation Pack http://bit.ly/QKKJzF Ronald Luttikhuizen ?Impression from our fault handling session in OSB and SOA Suite from the audience @soacommunity @gschmutz #oow pic.twitter.com/WSg1Z89E Marc Nice session on Oracle Virtual Assembly for #SOA11g, @soacommunity Works with #exalogic but not required SOA Community ?Send your #soacommunity #oow pictures and blog posts @soacommunity or http://www.facebook.com/soacommunity Enjoy OOW ;-) Jon petter hjulstad Oracle BPM- Big leap forward in 11.1.1.7 ! Whitehorses ?Common BPM Use Cases from Oracle #bpm #oow pic.twitter.com/ofOv04EF Whitehorses ?Oracle BPM 11.1.1.7 top new features. Interesting #oow #oowbenelux pic.twitter.com/HY9QN5un SOA Community Industrialized SOA - topic of Business Technology Magazine http://wp.me/p10C8u-vi orclateamsoa ?A-Team Blog #ateam: The curious case of SOA Human tasks' automatic completion http://ow.ly/1mq6YU Simone Geib Look for this sign #oow #oraclesoa pic.twitter.com/MJsPV4PO Lucas Jellema My summary of Larry Ellison's keynote at #oow on the AMIS Blog: http://technology.amis.nl/2012/10/01/oow-2012-larry-ellisons-keynote-announcements-exa-cloud-database/ … #oow_amis gschmutz ?Join my #oow session "Five Cool Use Cases for the Spring Component" to see the power of Spring and SOA Suite combined! Moscone 310 - 3:15 PM Ronald Luttikhuizen Thanks to @soacommunity for great SOA/BPM dinner event yesterday night! #oow pic.twitter.com/v7x3i0DC OracleBlogs ?OSB, Service Callouts and OQL http://ow.ly/2sq6B2 OracleBlogs ?Cloud and On-Premises Applications Integration using Oracle Integration Adapters http://ow.ly/2sqiDy OracleBlogs ?Adapters, SOA Suite and More @Openworld 2012 http://ow.ly/2srdTg Eric Elzinga ?OSB, Service Callouts and OQL - Part 3, http://see.sc/JodzEx #oracleservicebus Donatas Valys interesting articles about soa industrialization to read #soa #industrialization http://it-republik.de/business-technology/bt-magazin-ausgaben/Industrialized-SOA-000516.html … gschmutz ?“@techsymp: 2012 Symposium Presentation Download Page Now Available! 75% of presentations published. http://www.servicetechsymposium.com ” find mine there.. Oracle BPM Customer Experience and BPM – From Efficiency to Engagement #bpm #oraclebpm #processmanagement #socialbpm http://pub.vitrue.com/Tahi SOA Community ?@soacommunity SOA Community Newsletter September 2012 http://wp.me/p10C8u-wa SOA Community again again again.... it is Oracle Open World 2012 http://wp.me/p10C8u-wk OracleBlogs ?SOA Proactive support http://ow.ly/2smrSJ demed ?@gschmutz on NoSQL at @techsymp http://lockerz.com/s/247601661 demed ?Just finished "#BigData and its impact on #SOA" talk @techsymp. Really enjoyed getting out of beaten path. #london #oep http://lockerz.com/s/247636974 OTNArchBeat ?Need help selling SOA to business stakeholders? Give them this free eBook. #soasuite http://pub.vitrue.com/hsQY SOA Community top Tweets SOA Partner Community &ndash; September 2012 http://wp.me/p10C8u-vc SOA Community Move Data into the grid for scalable, predictable response times http://wp.me/p10C8u-vv ServiceTechSymposium ?The September issue of the Service Technology Magazine is now published with six new items! Read them at http://www.servicetechmag.com Marc ?Reviewed @Packt_OracleFMW new book on SOA11g administration! Very good ! http://tinyurl.com/8pzd5ww SOA Community ?BPM Solution Catalogue&ndash;promote your process templates http://wp.me/p10C8u-vt OTNArchBeat ?BPM ADF Task forms: Checking whether the current user is in a BPM Swimlane | @ChrisKarlChan http://pub.vitrue.com/aPMG OTNArchBeat ?Cloud, automation drive new growth in SOA governance market | @JoeMcKendrick http://pub.vitrue.com/hNPv Simon Haslam ?Looking for "oak style"(!) advanced content but you're a middleware specialist? See #ukoug2012 #middlewaresunday http://2012.ukoug.org/default.asp?p=9355 … Simon Haslam ?The #ukoug2012 agenda is "go, go, go!" (as Murray would say!) http://2012.ukoug.org/agendagrid Germán Gazzoni SOA Spezial II verfügbar – Industralized SOA: Die überarbeitete und ergänzte Neuauflage des SOA Spezial Sonderhe... http://bit.ly/PAWwN9 Oracle SOA ?Flip thru new interactive "Oracle SOA Suite eBook-In the Customers Words" #middleware #soa #oraclesoa http://pub.vitrue.com/NzFZ SOA Community Follow SOA Community on Facebook http://www.facebook.com/soacommunity #soacommunity #opn SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • Is Berkeley DB a NoSQL solution?

    - by Gregory Burd
    Berkeley DB is a library. To use it to store data you must link the library into your application. You can use most programming languages to access the API, the calls across these APIs generally mimic the Berkeley DB C-API which makes perfect sense because Berkeley DB is written in C. The inspiration for Berkeley DB was the DBM library, a part of the earliest versions of UNIX written by AT&T's Ken Thompson in 1979. DBM was a simple key/value hashtable-based storage library. In the early 1990s as BSD UNIX was transitioning from version 4.3 to 4.4 and retrofitting commercial code owned by AT&T with unencumbered code, it was the future founders of Sleepycat Software who wrote libdb (aka Berkeley DB) as the replacement for DBM. The problem it addressed was fast, reliable local key/value storage. At that time databases almost always lived on a single node, even the most sophisticated databases only had simple fail-over two node solutions. If you had a lot of data to store you would choose between the few commercial RDBMS solutions or to write your own custom solution. Berkeley DB took the headache out of the custom approach. These basic market forces inspired other DBM implementations. There was the "New DBM" (ndbm) and the "GNU DBM" (GDBM) and a few others, but the theme was the same. Even today TokyoCabinet calls itself "a modern implementation of DBM" mimicking, and improving on, something first created over thirty years ago. In the mid-1990s, DBM was the name for what you needed if you were looking for fast, reliable local storage. Fast forward to today. What's changed? Systems are connected over fast, very reliable networks. Disks are cheep, fast, and capable of storing huge amounts of data. CPUs continued to follow Moore's Law, processing power that filled a room in 1990 now fits in your pocket. PCs, servers, and other computers proliferated both in business and the personal markets. In addition to the new hardware entire markets, social systems, and new modes of interpersonal communication moved onto the web and started evolving rapidly. These changes cause a massive explosion of data and a need to analyze and understand that data. Taken together this resulted in an entirely different landscape for database storage, new solutions were needed. A number of novel solutions stepped up and eventually a category called NoSQL emerged. The new market forces inspired the CAP theorem and the heated debate of BASE vs. ACID. But in essence this was simply the market looking at what to trade off to meet these new demands. These new database systems shared many qualities in common. There were designed to address massive amounts of data, millions of requests per second, and scale out across multiple systems. The first large-scale and successful solution was Dynamo, Amazon's distributed key/value database. Dynamo essentially took the next logical step and added a twist. Dynamo was to be the database of record, it would be distributed, data would be partitioned across many nodes, and it would tolerate failure by avoiding single points of failure. Amazon did this because they recognized that the majority of the dynamic content they provided to customers visiting their web store front didn't require the services of an RDBMS. The queries were simple, key/value look-ups or simple range queries with only a few queries that required more complex joins. They set about to use relational technology only in places where it was the best solution for the task, places like accounting and order fulfillment, but not in the myriad of other situations. The success of Dynamo, and it's design, inspired the next generation of Non-SQL, distributed database solutions including Cassandra, Riak and Voldemort. The problem their designers set out to solve was, "reliability at massive scale" so the first focal point was distributed database algorithms. Underneath Dynamo there is a local transactional database; either Berkeley DB, Berkeley DB Java Edition, MySQL or an in-memory key/value data structure. Dynamo was an evolution of local key/value storage onto networks. Cassandra, Riak, and Voldemort all faced similar design decisions and one, Voldemort, choose Berkeley DB Java Edition for it's node-local storage. Riak at first was entirely in-memory, but has recently added write-once, append-only log-based on-disk storage similar type of storage as Berkeley DB except that it is based on a hash table which must reside entirely in-memory rather than a btree which can live in-memory or on disk. Berkeley DB evolved too, we added high availability (HA) and a replication manager that makes it easy to setup replica groups. Berkeley DB's replication doesn't partitioned the data, every node keeps an entire copy of the database. For consistency, there is a single node where writes are committed first - a master - then those changes are delivered to the replica nodes as log records. Applications can choose to wait until all nodes are consistent, or fire and forget allowing Berkeley DB to eventually become consistent. Berkeley DB's HA scales-out quite well for read-intensive applications and also effectively eliminates the central point of failure by allowing replica nodes to be elected (using a PAXOS algorithm) to mastership if the master should fail. This implementation covers a wide variety of use cases. MemcacheDB is a server that implements the Memcache network protocol but uses Berkeley DB for storage and HA to replicate the cache state across all the nodes in the cache group. Google Accounts, the user authentication layer for all Google properties, was until recently running Berkeley DB HA. That scaled to a globally distributed system. That said, most NoSQL solutions try to partition (shard) data across nodes in the replication group and some allow writes as well as reads at any node, Berkeley DB HA does not. So, is Berkeley DB a "NoSQL" solution? Not really, but it certainly is a component of many of the existing NoSQL solutions out there. Forgetting all the noise about how NoSQL solutions are complex distributed databases when you boil them down to a single node you still have to store the data to some form of stable local storage. DBMs solved that problem a long time ago. NoSQL has more to do with the layers on top of the DBM; the distributed, sometimes-consistent, partitioned, scale-out storage that manage key/value or document sets and generally have some form of simple HTTP/REST-style network API. Does Berkeley DB do that? Not really. Is Berkeley DB a "NoSQL" solution today? Nope, but it's the most robust solution on which to build such a system. Re-inventing the node-local data storage isn't easy. A lot of people are starting to come to appreciate the sophisticated features found in Berkeley DB, even mimic them in some cases. Could Berkeley DB grow into a NoSQL solution? Absolutely. Our key/value API could be extended over the net using any of a number of existing network protocols such as memcache or HTTP/REST. We could adapt our node-local data partitioning out over replicated nodes. We even have a nice query language and cost-based query optimizer in our BDB XML product that we could reuse were we to build out a document-based NoSQL-style product. XML and JSON are not so different that we couldn't adapt one to work with the other interchangeably. Without too much effort we could add what's missing, we could jump into this No SQL market withing a single product development cycle. Why isn't Berkeley DB already a NoSQL solution? Why aren't we working on it? Why indeed...

    Read the article

  • Tricks and Optimizations for you Sitecore website

    - by amaniar
    When working with Sitecore there are some optimizations/configurations I usually repeat in order to make my app production ready. Following is a small list I have compiled from experience, Sitecore documentation, communicating with Sitecore Engineers etc. This is not supposed to be technically complete and might not be fit for all environments.   Simple configurations that can make a difference: 1) Configure Sitecore Caches. This is the most straight forward and sure way of increasing the performance of your website. Data and item cache sizes (/databases/database/ [id=web] ) should be configured as needed. You may start with a smaller number and tune them as needed. <cacheSizes hint="setting"> <data>300MB</data> <items>300MB</items> <paths>5MB</paths> <standardValues>5MB</standardValues> </cacheSizes> Tune the html, registry etc cache sizes for your website.   <cacheSizes> <sites> <website> <html>300MB</html> <registry>1MB</registry> <viewState>10MB</viewState> <xsl>5MB</xsl> </website> </sites> </cacheSizes> Tune the prefetch cache settings under the App_Config/Prefetch/ folder. Sample /App_Config/Prefetch/Web.Config: <configuration> <cacheSize>300MB</cacheSize> <!--preload items that use this template--> <template desc="mytemplate">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</template> <!--preload this item--> <item desc="myitem">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }</item> <!--preload children of this item--> <children desc="childitems">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</children> </configuration> Break your page into sublayouts so you may cache most of them. Read the caching configuration reference: http://sdn.sitecore.net/upload/sitecore6/sc62keywords/cache_configuration_reference_a4.pdf   2) Disable Analytics for the Shell Site <site name="shell" virtualFolder="/sitecore/shell" physicalFolder="/sitecore/shell" rootPath="/sitecore/content" startItem="/home" language="en" database="core" domain="sitecore" loginPage="/sitecore/login" content="master" contentStartItem="/Home" enableWorkflow="true" enableAnalytics="false" xmlControlPage="/sitecore/shell/default.aspx" browserTitle="Sitecore" htmlCacheSize="2MB" registryCacheSize="3MB" viewStateCacheSize="200KB" xslCacheSize="5MB" />   3) Increase the Check Interval for the MemoryMonitorHook so it doesn’t run every 5 seconds (default). <hook type="Sitecore.Diagnostics.MemoryMonitorHook, Sitecore.Kernel"> <param desc="Threshold">800MB</param> <param desc="Check interval">00:05:00</param> <param desc="Minimum time between log entries">00:01:00</param> <ClearCaches>false</ClearCaches> <GarbageCollect>false</GarbageCollect> <AdjustLoadFactor>false</AdjustLoadFactor> </hook>   4) Set Analytics.PeformLookup (Sitecore.Analytics.config) to false if your environment doesn’t have access to the internet or you don’t intend to use reverse DNS lookup. <setting name="Analytics.PerformLookup" value="false" />   5) Set the value of the “Media.MediaLinkPrefix” setting to “-/media”: <setting name="Media.MediaLinkPrefix" value="-/media" /> Add the following line to the customHandlers section: <customHandlers> <handler trigger="-/media/" handler="sitecore_media.ashx" /> <handler trigger="~/media/" handler="sitecore_media.ashx" /> <handler trigger="~/api/" handler="sitecore_api.ashx" /> <handler trigger="~/xaml/" handler="sitecore_xaml.ashx" /> <handler trigger="~/icon/" handler="sitecore_icon.ashx" /> <handler trigger="~/feed/" handler="sitecore_feed.ashx" /> </customHandlers> Link: http://squad.jpkeisala.com/2011/10/sitecore-media-library-performance-optimization-checklist/   6) Performance counters should be disabled in production if not being monitored <setting name="Counters.Enabled" value="false" />   7) Disable Item/Memory/Timing threshold warnings. Due to the nature of this component, it brings no value in production. <!--<processor type="Sitecore.Pipelines.HttpRequest.StartMeasurements, Sitecore.Kernel" />--> <!--<processor type="Sitecore.Pipelines.HttpRequest.StopMeasurements, Sitecore.Kernel"> <TimingThreshold desc="Milliseconds">1000</TimingThreshold> <ItemThreshold desc="Item count">1000</ItemThreshold> <MemoryThreshold desc="KB">10000</MemoryThreshold> </processor>—>   8) The ContentEditor.RenderCollapsedSections setting is a hidden setting in the web.config file, which by default is true. Setting it to false will improve client performance for authoring environments. <setting name="ContentEditor.RenderCollapsedSections" value="false" />   9) Add a machineKey section to your Web.Config file when using a web farm. Link: http://msdn.microsoft.com/en-us/library/ff649308.aspx   10) If you get errors in the log files similar to: WARN Could not create an instance of the counter 'XXX.XXX' (category: 'Sitecore.System') Exception: System.UnauthorizedAccessException Message: Access to the registry key 'Global' is denied. Make sure the ApplicationPool user is a member of the system “Performance Monitor Users” group on the server.   11) Disable WebDAV configurations on the CD Server if not being used. More: http://sitecoreblog.alexshyba.com/2011/04/disable-webdav-in-sitecore.html   12) Change Log4Net settings to only log Errors on content delivery environments to avoid unnecessary logging. <root> <priority value="ERROR" /> <appender-ref ref="LogFileAppender" /> </root>   13) Disable Analytics for any content item that doesn’t add value. For example a page that redirects to another page.   14) When using Web User Controls avoid registering them on the page the asp.net way: <%@ Register Src="~/layouts/UserControls/MyControl.ascx" TagName="MyControl" TagPrefix="uc2" %> Use Sublayout web control instead – This way Sitecore caching could be leveraged <sc:Sublayout ID="ID" Path="/layouts/UserControls/MyControl.ascx" Cacheable="true" runat="server" />   15) Avoid querying for all children recursively when all items are direct children. Sitecore.Context.Database.SelectItems("/sitecore/content/Home//*"); //Use: Sitecore.Context.Database.GetItem("/sitecore/content/Home");   16) On IIS — you enable static & dynamic content compression on CM and CD More: http://technet.microsoft.com/en-us/library/cc754668%28WS.10%29.aspx   17) Enable HTTP Keep-alive and content expiration in IIS.   18) Use GUID’s when accessing items and fields instead of names or paths. Its faster and wont break your code when things get moved or renamed. Context.Database.GetItem("{324DFD16-BD4F-4853-8FF1-D663F6422DFF}") Context.Item.Fields["{89D38A8F-394E-45B0-826B-1A826CF4046D}"]; //is better than Context.Database.GetItem("/Home/MyItem") Context.Item.Fields["FieldName"]   Hope this helps.

    Read the article

  • JMaghreb 2012 Trip Report

    - by arungupta
    JMaghreb is the inaugural Java conference organized by Morocco JUG. It is the biggest Java conference in Maghreb (5 countries in North West Africa). Oracle was the exclusive platinum sponsor with several others. The registrations had to be closed at 1412 for the free conference and several folks were already on the waiting list. Rabat with 531 registrations and Casablanca with 426 were the top cities. Some statistics ... 850+ attendees over 2 days, 500+ every day 30 sessions were delivered by 18 speakers from 10 different countries 10 sessions in French and 20 in English 6 of the speakers spoke at JavaOne 2012 8 will be at Devoxx Attendees from 5 different countries and 57 cities in Morocco 40.9% qualified them as professional and rest as students Topics ranged from HTML5, Java EE 7, ADF, JavaFX, MySQL, JCP, Vaadin, Android, Community, JCP Java EE 6 hands-on lab was sold out within 7 minutes and JavaFX in 12 minutes I gave the keynote along with Simon Ritter which was basically a recap of the Strategy and Technical keynotes presented at JavaOne 2012. An informal survey during the keynote showed the following numbers: 25% using NetBeans, 90% on Eclipse, 3 on JDeveloper, 1 on IntelliJ About 10 subscribers to free online Java magazine. This digital magazine is a comprehensive source of information for everything Java - subscribe for free!! About 10-15% using Java SE 7. Download JDK 7 and get started today! Even JDK 8 builds have been available for a while now. My second talk explained the core concepts of WebSocket and how JSR 356 is providing a standard API to build WebSocket-driven applications in Java EE 7. TOTD #183 explains how you can easily get started with WebSocket in GlassFish 4. The complete slide deck is available: Next day started with a community keynote by Sonya Barry. Some of us live the life of JCP, JSR, EG, EC, RI, etc every day, but not every body is. To address that, Sonya prepared an excellent introductory presentation providing an explanation of these terms and how java.net infrastructure supports Java development. The registration for the lab showed there is a definite demand for these technologies in this part of the world. I delivered the Java EE 6 hands-on lab to a packed room of about 120 attendees. Most of the attendees were able to progress and follow the lab instructions. Some of the attendees did not have a laptop but were taking extensive notes on paper notepads. Several attendees were already using Java EE 6 in their projects and typically they are the ones asking deep dive questions. Also gave out three copies of my recently released Java EE 6 Pocket Guide and new GlassFish t-shirts. Definitely feels happy to coach ~120 more Java developers learn standards-based enterprise Java programming. I also participated in a JCP BoF along with Werner, Sonya, and Badr. Adotp-a-JSR, java.net infrastructure, how to file a JSR, what is an RI, and other similar topics were discussed in a candid manner. You can follow @JMaghrebConf or check out their facebook page. java.net published a timely conversation with Badr El Houari - the fearless leader of the Morocco JUG team. Did you know that Morocco JUG stood for JCP EC elections (ADD LINK) ? Even though they did not get elected but did fairly well. Now some sample tweets from #JMaghreb ... #JMaghreb is over. Impressive for a first edition! Thanks @badrelhouari and all the @MoroccoJUG team ! Since you @speakjava : System.out.println("Thank you so much dear Tech Evangelist ! The JavaFX was pretty amazing !!! "); #JMaghreb @YounesVendetta @arungupta @JMaghrebConf Right ! hope he will be back to morocco again and again .. :) @Alji_ @arungupta @JMaghrebConf That dude is a genius ;) Put it on your wall :p @arungupta rocking Java EE 6 at @JMaghrebConf #Java #JavaEE #JMaghreb http://t.co/isl0Iq5p @sonyabarry you are an awesome speaker ;-) #JMaghreb rich more than 550 attendees in day one. Expecting more tomorrow! ongratulations @badrelhouari the organisation was great! The talks were pretty interesting, and the turnout was surprising at #JMaghreb! #JMaghreb is truly awesome... The speakers are unbelievable ! #JavaFX... Just amazing #JMaghreb Charmed by the talk about #javaFX ( nodes architecture, MVC, Lazy loading, binding... ) gotta start using it intead of SWT. #JMaghreb JavaFX is killing JFreeChart. It supports Charts a lot of kind of them ... #JMaghreb The british man is back #JMaghreb I do like him!! #JMaghreb @arungupta rocking @JMaghrebConf. pic.twitter.com/CNohA3PE @arungupta Great talk about the future of Java EE (JEE 7 & JEE 8) Thank you. #JMaghreb JEE7 more mooore power , leeess less code !! #JMaghreb They are simplifying the existing API for Java Message Service 2.0 #JMaghreb good to know , the more the code is simplified the better ! The Glassdoor guy #arungupta is doing it RIGHT ! #JMaghreb Great presentation of The Future of the Java Platform: Java EE 7, Java SE 8 & Beyond #jMaghreb @arungupta is a great Guy apparently #JMaghreb On a personal front, the hotel (Soiftel Jardin des Roses) was pretty nice and the location was perfect. There was a 1.8 mile loop dirt trail right next to it so I managed to squeeze some runs before my upcoming marathon. Also enjoyed some great Moroccan cuisine - Couscous, Tajine, mint tea, and moroccan salad. Visit to Kasbah of the Udayas, Hassan II (one of the tallest mosque in the world), and eating in a restaurant in a kasbah are some of the exciting local experiences. Now some pictures from the event (and around the city) ... And the complete album: Many thanks to Badr, Faisal, and rest of the team for organizing a great conference. They are already thinking about how to improve the content, logisitics, and flow for the next year. I'm certainly looking forward to JMaghreb 2.0 :-)

    Read the article

  • Windows Azure VMs - New "Stopped" VM Options Provide Cost-effective Flexibility for On-Demand Workloads

    - by KeithMayer
    Originally posted on: http://geekswithblogs.net/KeithMayer/archive/2013/06/22/windows-azure-vms---new-stopped-vm-options-provide-cost-effective.aspxDidn’t make it to TechEd this year? Don’t worry!  This month, we’ll be releasing a new article series that highlights the Best of TechEd announcements and technical information for IT Pros.  Today’s article focuses on a new, much-heralded enhancement to Windows Azure Infrastructure Services to make it more cost-effective for spinning VMs up and down on-demand on the Windows Azure cloud platform. NEW! VMs that are shutdown from the Windows Azure Management Portal will no longer continue to accumulate compute charges while stopped! Previous to this enhancement being available, the Azure platform maintained fabric resource reservations for VMs, even in a shutdown state, to ensure consistent resource availability when starting those VMs in the future.  And, this meant that VMs had to be exported and completely deprovisioned when not in use to avoid compute charges. In this article, I'll provide more details on the scenarios that this enhancement best fits, and I'll also review the new options and considerations that we now have for performing safe shutdowns of Windows Azure VMs. Which scenarios does the new enhancement best fit? Being able to easily shutdown VMs from the Windows Azure Management Portal without continued compute charges is a great enhancement for certain cloud use cases, such as: On-demand dev/test/lab environments - Freely start and stop lab VMs so that they are only accumulating compute charges when being actively used.  "Bursting" load-balanced web applications - Provision a number of load-balanced VMs, but keep the minimum number of VMs running to support "normal" loads. Easily start-up the remaining VMs only when needed to support peak loads. Disaster Recovery - Start-up "cold" VMs when needed to recover from disaster scenarios. BUT ... there is a consideration to keep in mind when using the Windows Azure Management Portal to shutdown VMs: although performing a VM shutdown via the Windows Azure Management Portal causes that VM to no longer accumulate compute charges, it also deallocates the VM from fabric resources to which it was previously assigned.  These fabric resources include compute resources such as virtual CPU cores and memory, as well as network resources, such as IP addresses.  This means that when the VM is later started after being shutdown from the portal, the VM could be assigned a different IP address or placed on a different compute node within the fabric. In some cases, you may want to shutdown VMs using the old approach, where fabric resource assignments are maintained while the VM is in a shutdown state.  Specifically, you may wish to do this when temporarily shutting down or restarting a "7x24" VM as part of a maintenance activity.  Good news - you can still revert back to the old VM shutdown behavior when necessary by using the alternate VM shutdown approaches listed below.  Let's walk through each approach for performing a VM Shutdown action on Windows Azure so that we can understand the benefits and considerations of each... How many ways can I shutdown a VM? In Windows Azure Infrastructure Services, there's three general ways that can be used to safely shutdown VMs: Shutdown VM via Windows Azure Management Portal Shutdown Guest Operating System inside the VM Stop VM via Windows PowerShell using Windows Azure PowerShell Module Although each of these options performs a safe shutdown of the guest operation system and the VM itself, each option handles the VM shutdown end state differently. Shutdown VM via Windows Azure Management Portal When clicking the Shutdown button at the bottom of the Virtual Machines page in the Windows Azure Management Portal, the VM is safely shutdown and "deallocated" from fabric resources.  Shutdown button on Virtual Machines page in Windows Azure Management Portal  When the shutdown process completes, the VM will be shown on the Virtual Machines page with a "Stopped ( Deallocated )" status as shown in the figure below. Virtual Machine in a "Stopped (Deallocated)" Status "Deallocated" means that the VM configuration is no longer being actively associated with fabric resources, such as virtual CPUs, memory and networks. In this state, the VM will not continue to allocate compute charges, but since fabric resources are deallocated, the VM could receive a different internal IP address ( called "Dynamic IPs" or "DIPs" in Windows Azure ) the next time it is started.  TIP: If you are leveraging this shutdown option and consistency of DIPs is important to applications running inside your VMs, you should consider using virtual networks with your VMs.  Virtual networks permit you to assign a specific IP Address Space for use with VMs that are assigned to that virtual network.  As long as you start VMs in the same order in which they were originally provisioned, each VM should be reassigned the same DIP that it was previously using. What about consistency of External IP Addresses? Great question! External IP addresses ( called "Virtual IPs" or "VIPs" in Windows Azure ) are associated with the cloud service in which one or more Windows Azure VMs are running.  As long as at least 1 VM inside a cloud service remains in a "Running" state, the VIP assigned to a cloud service will be preserved.  If all VMs inside a cloud service are in a "Stopped ( Deallocated )" status, then the cloud service may receive a different VIP when VMs are next restarted. TIP: If consistency of VIPs is important for the cloud services in which you are running VMs, consider keeping one VM inside each cloud service in the alternate VM shutdown state listed below to preserve the VIP associated with the cloud service. Shutdown Guest Operating System inside the VM When performing a Guest OS shutdown or restart ( ie., a shutdown or restart operation initiated from the Guest OS running inside the VM ), the VM configuration will not be deallocated from fabric resources. In the figure below, the VM has been shutdown from within the Guest OS and is shown with a "Stopped" VM status rather than the "Stopped ( Deallocated )" VM status that was shown in the previous figure. Note that it may require a few minutes for the Windows Azure Management Portal to reflect that the VM is in a "Stopped" state in this scenario, because we are performing an OS shutdown inside the VM rather than through an Azure management endpoint. Virtual Machine in a "Stopped" Status VMs shown in a "Stopped" status will continue to accumulate compute charges, because fabric resources are still being reserved for these VMs.  However, this also means that DIPs and VIPs are preserved for VMs in this state, so you don't have to worry about VMs and cloud services getting different IP addresses when they are started in the future. Stop VM via Windows PowerShell In the latest version of the Windows Azure PowerShell Module, a new -StayProvisioned parameter has been added to the Stop-AzureVM cmdlet. This new parameter provides the flexibility to choose the VM configuration end result when stopping VMs using PowerShell: When running the Stop-AzureVM cmdlet without the -StayProvisioned parameter specified, the VM will be safely stopped and deallocated; that is, the VM will be left in a "Stopped ( Deallocated )" status just like the end result when a VM Shutdown operation is performed via the Windows Azure Management Portal.  When running the Stop-AzureVM cmdlet with the -StayProvisioned parameter specified, the VM will be safely stopped but fabric resource reservations will be preserved; that is the VM will be left in a "Stopped" status just like the end result when performing a Guest OS shutdown operation. So, with PowerShell, you can choose how Windows Azure should handle VM configuration and fabric resource reservations when stopping VMs on a case-by-case basis. TIP: It's important to note that the -StayProvisioned parameter is only available in the latest version of the Windows Azure PowerShell Module.  So, if you've previously downloaded this module, be sure to download and install the latest version to get this new functionality. Want to Learn More about Windows Azure Infrastructure Services? To learn more about Windows Azure Infrastructure Services, be sure to check-out these additional FREE resources: Become our next "Early Expert"! Complete the Early Experts "Cloud Quest" and build a multi-VM lab network in the cloud for FREE!  Build some cool scenarios! Check out our list of over 20+ Step-by-Step Lab Guides based on key scenarios that IT Pros are implementing on Windows Azure Infrastructure Services TODAY!  Looking forward to seeing you in the Cloud! - Keith Build Your Lab! Download Windows Server 2012 Don’t Have a Lab? Build Your Lab in the Cloud with Windows Azure Virtual Machines Want to Get Certified? Join our Windows Server 2012 "Early Experts" Study Group

    Read the article

  • Asserting with JustMock

    - by mehfuzh
    In this post, i will be digging in a bit deep on Mock.Assert. This is the continuation from previous post and covers up the ways you can use assert for your mock expectations. I have used another traditional sample of Talisker that has a warehouse [Collaborator] and an order class [SUT] that will call upon the warehouse to see the stock and fill it up with items. Our sample, interface of warehouse and order looks similar to : public interface IWarehouse {     bool HasInventory(string productName, int quantity);     void Remove(string productName, int quantity); }   public class Order {     public string ProductName { get; private set; }     public int Quantity { get; private set; }     public bool IsFilled { get; private set; }       public Order(string productName, int quantity)     {         this.ProductName = productName;         this.Quantity = quantity;     }       public void Fill(IWarehouse warehouse)     {         if (warehouse.HasInventory(ProductName, Quantity))         {             warehouse.Remove(ProductName, Quantity);             IsFilled = true;         }     }   }   Our first example deals with mock object assertion [my take] / assert all scenario. This will only act on the setups that has this “MustBeCalled” flag associated. To be more specific , let first consider the following test code:    var order = new Order(TALISKER, 0);    var wareHouse = Mock.Create<IWarehouse>();      Mock.Arrange(() => wareHouse.HasInventory(Arg.Any<string>(), 0)).Returns(true).MustBeCalled();    Mock.Arrange(() => wareHouse.Remove(Arg.Any<string>(), 0)).Throws(new InvalidOperationException()).MustBeCalled();    Mock.Arrange(() => wareHouse.Remove(Arg.Any<string>(), 100)).Throws(new InvalidOperationException());      //exercise    Assert.Throws<InvalidOperationException>(() => order.Fill(wareHouse));    // it will assert first and second setup.    Mock.Assert(wareHouse); Here, we have created the order object, created the mock of IWarehouse , then I setup our HasInventory and Remove calls of IWarehouse with my expected, which is called by the order.Fill internally. Now both of these setups are marked as “MustBeCalled”. There is one additional IWarehouse.Remove that is invalid and is not marked.   On line 9 ,  as we do order.Fill , the first and second setups will be invoked internally where the third one is left  un-invoked. Here, Mock.Assert will pass successfully as  both of the required ones are called as expected. But, if we marked the third one as must then it would fail with an  proper exception. Here, we can also see that I have used the same call for two different setups, this feature is called sequential mocking and will be covered later on. Moving forward, let’s say, we don’t want this must call, when we want to do it specifically with lamda. For that let’s consider the following code: //setup - data var order = new Order(TALISKER, 50); var wareHouse = Mock.Create<IWarehouse>();   Mock.Arrange(() => wareHouse.HasInventory(TALISKER, 50)).Returns(true);   //exercise order.Fill(wareHouse);   //verify state Assert.True(order.IsFilled); //verify interaction Mock.Assert(()=> wareHouse.HasInventory(TALISKER, 50));   Here, the snippet shows a case for successful order, i haven’t used “MustBeCalled” rather i used lamda specifically to assert the call that I have made, which is more justified for the cases where we exactly know the user code will behave. But, here goes a question that how we are going assert a mock call if we don’t know what item a user code may request for. In that case, we can combine the matchers with our assert calls like we do it for arrange: //setup - data  var order = new Order(TALISKER, 50);  var wareHouse = Mock.Create<IWarehouse>();    Mock.Arrange(() => wareHouse.HasInventory(TALISKER, Arg.Matches<int>( x => x <= 50))).Returns(true);    //exercise  order.Fill(wareHouse);    //verify state  Assert.True(order.IsFilled);    //verify interaction  Mock.Assert(() => wareHouse.HasInventory(Arg.Any<string>(), Arg.Matches<int>(x => x <= 50)));   Here, i have asserted a mock call for which i don’t know the item name,  but i know that number of items that user will request is less than 50.  This kind of expression based assertion is now possible with JustMock. We can extent this sample for properties as well, which will be covered shortly [in other posts]. In addition to just simple assertion, we can also use filters to limit to times a call has occurred or if ever occurred. Like for the first test code, we have one setup that is never invoked. For such, it is always valid to use the following assert call: Mock.Assert(() => wareHouse.Remove(Arg.Any<string>(), 100), Occurs.Never()); Or ,for warehouse.HasInventory we can do the following: Mock.Assert(() => wareHouse.HasInventory(Arg.Any<string>(), 0), Occurs.Once()); Or,  to be more specific, it’s even better with: Mock.Assert(() => wareHouse.HasInventory(Arg.Any<string>(), 0), Occurs.Exactly(1));   There are other filters  that you can apply here using AtMost, AtLeast and AtLeastOnce but I left those to the readers. You can try the above sample that is provided in the examples shipped with JustMock.Please, do check it out and feel free to ping me for any issues.   Enjoy!!

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #051

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Explanation and Understanding NOT NULL Constraint NOT NULL is integrity CONSTRAINT. It does not allow creating of the row where column contains NULL value. Most discussed questions about NULL is what is NULL? I will not go in depth analysis it. Simply put NULL is unknown or missing data. When NULL is present in database columns, it can affect the integrity of the database. I really do not prefer NULL in the database unless they are absolutely necessary. Three T-SQL Script to Create Primary Keys on Table I have always enjoyed writing about three topics Constraint and Keys, Backup and Restore and Datetime Functions. Primary Keys constraints prevent duplicate values for columns and provides a unique identifier to each column, as well it creates clustered index on the columns. 2008 Get Numeric Value From Alpha Numeric String – UDF for Get Numeric Numbers Only SQL is great with String operations. Many times, I use T-SQL to do my string operation. Let us see User Defined Function, which I wrote a few days ago, which will return only Numeric values from Alpha Numeric values. Introduction and Example of UNION and UNION ALL It is very much interesting when I get requests from blog reader to re-write my previous articles. I have received few requests to rewrite my article SQL SERVER – Union vs. Union All – Which is better for performance? with examples. I request you to read my previous article first to understand what is the concept and read this article to understand the same concept with an example. Downgrade Database for Previous Version The main questions is how they can downgrade the from SQL Server 2005 to SQL Server 2000? The answer is : Not Possible. Get Common Records From Two Tables Without Using Join Following is my scenario, Suppose Table 1 and Table 2 has same column e.g. Column1 Following is the query, 1. Select column1,column2 From Table1 2. Select column1 From Table2 I want to find common records from these tables, but I don’t want to use the Join clause because for that I need to specify the column name for Join condition. Will you help me to get common records without using Join condition? I am using SQL Server 2005. Retrieve – Select Only Date Part From DateTime – Best Practice – Part 2 A year ago I wrote a post about SQL SERVER – Retrieve – Select Only Date Part From DateTime – Best Practice where I have discussed two different methods of getting the date part from datetime. Introduction to CLR – Simple Example of CLR Stored Procedure CLR is an abbreviation of Common Language Runtime. In SQL Server 2005 and later version of it database objects can be created which are created in CLR. Stored Procedures, Functions, Triggers can be coded in CLR. CLR is faster than T-SQL in many cases. CLR is mainly used to accomplish tasks which are not possible by T-SQL or can use lots of resources. The CLR can be usually implemented where there is an intense string operation, thread management or iteration methods which can be complicated for T-SQL. Implementing CLR provides more security to the Extended Stored Procedure. 2009 Comic Slow Query – SQL Joke Before Presentation After Presentation Enable Automatic Statistic Update on Database In one of the recent projects, I found out that despite putting good indexes and optimizing the query, I could not achieve an optimized performance and I still received an unoptimized response from the SQL Server. On examination, I figured out that the culprit was statistics. The database that I was trying to optimize had auto update of the statistics was disabled. Recently Executed T-SQL Query Please refer to blog post  query to recently executed T-SQL query on database. Change Collation of Database Column – T-SQL Script – Consolidating Collations – Extention Script At some time in your DBA career, you may find yourself in a position when you sit back and realize that your database collations have somehow run amuck, or are faced with the ever annoying CANNOT RESOLVE COLLATION message when trying to join data of varying collation settings. 2010 Visiting Alma Mater – Delivering Session on Database Performance and Career – Nirma Institute of Technology Everyone always dreams of visiting their school and college, where they have studied once. It is a great feeling to see the college once again – where you have spent the wonderful golden years of your time. College time is filled with studies, education, emotions and several plans to build a future. I consider myself fortunate as I got the opportunity to study at some of the best places in the world. Change Column DataTypes There are times when I feel like writing that I am a day older in SQL Server. In fact, there are many who are looking for a solution that is simple enough. Have you ever searched online for something very simple. I often do and enjoy doing things which are straight forward and easy to change. 2011 Three DMVs – sys.dm_server_memory_dumps – sys.dm_server_services – sys.dm_server_registry In this blog post we will see three new DMVs which are introduced in Denali. The DMVs are very simple and there is not much to describe them. So here is the simple game. I will be asking a question back to you after seeing the result of the each of the DMV and you help me to complete this blog post. A Simple Quiz – T-SQL Brain Trick If you have some time, I strongly suggest you try this quiz out as it is for sure twists your brain. 2012 List All The Column With Specific Data Types in Database 5 years ago I wrote script SQL SERVER – 2005 – List All The Column With Specific Data Types, when I read it again, it is very much relevant and I liked it. This is one of the script which every developer would like to keep it handy. I have upgraded the script bit more. I have included few additional information which I believe I should have added from the beginning. It is difficult to visualize the final script when we are writing it first time. Find First Non-Numeric Character from String The function PATINDEX exists for quite a long time in SQL Server but I hardly see it being used. Well, at least I use it and I am comfortable using it. Here is a simple script which I use when I have to identify first non-numeric character. Finding Different ColumnName From Almost Identitical Tables Well here is the interesting example of how we can use sys.column catalogue views and get the details of the newly added column. I have previously written about EXCEPT over here which is very similar to MINUS of Oracle. Storing Data and Files in Cloud – Dropbox – Personal Technology Tip I thought long and hard about doing a Personal Technology Tips series for this blog.  I have so many tips I’d like to share.  I am on my computer almost all day, every day, so I have a treasure trove of interesting tidbits I like to share if given the chance.  The only thing holding me back – which tip to share first?  The first tip obviously has the weight of seeming like the most important.  But this would mean choosing amongst my favorite tricks and shortcuts.  This is a hard task. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SQL Server Master class winner

    - by Testas
     The winner of the SQL Server MasterClass competition courtesy of the UK SQL Server User Group and SQL Server Magazine!    Steve Hindmarsh     There is still time to register for the seminar yourself at:  www.regonline.co.uk/kimtrippsql     More information about the seminar     Where: Radisson Edwardian Heathrow Hotel, London  When: Thursday 17th June 2010  This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will: Debunk many of the ingrained misconceptions around SQL Server's behaviour    Show you disaster recovery techniques critical to preserving your company's life-blood - the data    Explain how a common application design pattern can wreak havoc in the database Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to change  Sessions Abstracts  KEYNOTE: Bridging the Gap Between Development and Production    Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.   SESSION ONE: SQL Server Mythbusters  It's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained.   SESSION TWO: Database Recovery Techniques Demo-Fest  Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted!   SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward   Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys!   SESSION 4: Essential Database Maintenance  In this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well. Speaker Biographies     Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.   Speaker Testimonials  "To call them good trainers is an epic understatement. They know how to deliver technical material in ways that illustrate it well. I had to stop Paul at one point and ask him how long it took to build a particular slide because the animations were so good at conveying a hard-to-describe process." "These are not beginner presenters, and they put an extreme amount of preparation and attention to detail into everything that they do. Completely, utterly professional." "When it comes to the instructors themselves, Kimberly and Paul simply have no equal. Not only are they both ultimate authorities, but they have endless enthusiasm about the material, and spot on delivery. If either ever got tired they never showed it, even after going all day and all week. We witnessed countless demos over the course of the week, some extremely involved, multi-step processes, and I can’t recall one that didn’t go the way it was supposed to." "You might think that with this extreme level of skill comes extreme levels of egotism and lack of patience. Nothing could be further from the truth. ... They simply know how to teach, and are approachable, humble, and patient." "The experience Paul and Kimberly have had with real live customers yields a lot more information and things to watch out for than you'd ever get from documentation alone." “Kimberly, I just wanted to send you an email to let you know how awesome you are! I have applied some of your indexing strategies to our website’s homegrown CMS and we are experiencing a significant performance increase. WOW....amazing tips delivered in an exciting way!  Thanks again” 

    Read the article

  • Why won't fetchmail work all of a sudden?

    - by SirCharlo
    I ran a chmod 777 * on my home folder. (I know, I know. I'll never do it again.) Ever since then, fetchmail seems to be broken. I use it to fetch mail from an Exchange 2003 mailbox through DAVMail and OWA. The problem is that fetchmail complains about an "expunge mismatch" whenever I get a new message. It deletes the message from the Exchange mailbox, yet it never forwards it. There seems to be a problem somwhere along the mail processing, but I haven't been able to pinpoint where. Any help would be appreciated. Here are the relevant config files. ~/fetchmailrc: set no bouncemail defaults: antispam -1 batchlimit 100 poll localhost with protocol imap and port 1143 user domain\\user password Password is root no rewrite mda "/usr/bin/procmail -f %F -d %T"; ~/procmailrc: :0 * ^Subject.*ack | expand | sed -e 's/[ ]*$//g' | sed -e 's/^/ /' > /usr/local/nagios/libexec/mail_acknowledgement ~/.forward: | "/usr/bin/procmail" And here is the output when I run fetchmail -f /root/.fetchmailrc -vv: fetchmail: WARNING: Running as root is discouraged. Old UID list from localhost: <empty> Scratch list of UIDs: <empty> fetchmail: 6.3.19 querying localhost (protocol IMAP) at Tue 03 Jul 2012 09:46:36 AM EDT: poll started Trying to connect to 127.0.0.1/1143...connected. fetchmail: IMAP< * OK [CAPABILITY IMAP4REV1 AUTH=LOGIN] IMAP4rev1 DavMail 3.9.7-1870 server ready fetchmail: IMAP> A0001 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4REV1 AUTH=LOGIN fetchmail: IMAP< A0001 OK CAPABILITY completed fetchmail: Protocol identified as IMAP4 rev 1 fetchmail: GSSAPI error gss_inquire_cred: Unspecified GSS failure. Minor code may provide more information fetchmail: GSSAPI error gss_inquire_cred: fetchmail: No suitable GSSAPI credentials found. Skipping GSSAPI authentication. fetchmail: If you want to use GSSAPI, you need credentials first, possibly from kinit. fetchmail: IMAP> A0002 LOGIN "domain\\user" * fetchmail: IMAP< A0002 OK Authenticated fetchmail: selecting or re-polling default folder fetchmail: IMAP> A0003 SELECT "INBOX" fetchmail: IMAP< * 1 EXISTS fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< * OK [UIDVALIDITY 1] fetchmail: IMAP< * OK [UIDNEXT 344] fetchmail: IMAP< * FLAGS (\Answered \Deleted \Draft \Flagged \Seen $Forwarded Junk) fetchmail: IMAP< * OK [PERMANENTFLAGS (\Answered \Deleted \Draft \Flagged \Seen $Forwarded Junk)] fetchmail: IMAP< A0003 OK [READ-WRITE] SELECT completed fetchmail: 1 message waiting after first poll fetchmail: IMAP> A0004 EXPUNGE fetchmail: IMAP< A0004 OK EXPUNGE completed fetchmail: 1 message waiting after expunge fetchmail: IMAP> A0005 SEARCH UNSEEN fetchmail: IMAP< * SEARCH 1 fetchmail: 1 is unseen fetchmail: IMAP< A0005 OK SEARCH completed fetchmail: 1 is first unseen 1 message for domain\user at localhost. fetchmail: IMAP> A0006 FETCH 1 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (UID 343 RFC822.SIZE 1350) fetchmail: IMAP< A0006 OK FETCH completed fetchmail: IMAP> A0007 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (UID 343 RFC822.HEADER {1350} reading message domain\user@localhost:1 of 1 (1350 header octets) fetchmail: about to deliver with: /usr/bin/procmail -f '[email protected]' -d 'root' # fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< Bonne journ=E9e.. fetchmail: IMAP< fetchmail: IMAP< Company Name fetchmail: IMAP< My Name fetchmail: IMAP< IT fetchmail: IMAP< Tel: (XXX) XXX-XXXX xXXX fetchmail: IMAP< www.domain.com=20 fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< -----Message d'origine----- fetchmail: IMAP< De=A0: User [mailto:[email protected]]=20 fetchmail: IMAP< Envoy=E9=A0: 2 juillet 2012 15:50 fetchmail: IMAP< =C0=A0: Informatique fetchmail: IMAP< Objet=A0: PROBLEM: photo fetchmail: IMAP< fetchmail: IMAP< Notification Type: PROBLEM fetchmail: IMAP< Author:=20 fetchmail: IMAP< Comment:=20 fetchmail: IMAP< fetchmail: IMAP< Host: Photos fetchmail: IMAP< Hostname: photo fetchmail: IMAP< State: DOWN fetchmail: IMAP< Address: XXX.XX.X.XX fetchmail: IMAP< fetchmail: IMAP< Date/Time: Mon Jul 2 15:49:38 EDT 2012 fetchmail: IMAP< fetchmail: IMAP< Info: CRITICAL - XXX.XX.X.XX: rta nan, lost 100% fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< ) fetchmail: IMAP< A0007 OK FETCH completed fetchmail: IMAP> A0008 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (UID 343 BODY[TEXT] {539} (539 body octets) ******************************* fetchmail: IMAP< ) fetchmail: IMAP< A0008 OK FETCH completed flushed fetchmail: IMAP> A0009 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (UID 343 FLAGS (\Seen \Deleted)) fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< A0009 OK STORE completed fetchmail: IMAP> A0010 EXPUNGE fetchmail: IMAP< A0010 OK EXPUNGE completed fetchmail: mail expunge mismatch (0 actual != 1 expected) fetchmail: IMAP> A0011 LOGOUT fetchmail: IMAP< * BYE Closing connection fetchmail: IMAP< A0011 OK LOGOUT completed fetchmail: client/server synchronization error while fetching from domain\user@localhost fetchmail: 6.3.19 querying localhost (protocol IMAP) at Tue 03 Jul 2012 09:46:36 AM EDT: poll completed Merged UID list from localhost: <empty> fetchmail: Query status=7 (ERROR) fetchmail: normal termination, status 7

    Read the article

  • Career development as a Software Developer without becoming a manager.

    - by albertpascual
    I’m a developer, I like to write new exciting code everyday, my perfect day at work is a day that when I wake up, I know that I have to write some code that I haven’t done before or to use a new framework/language/platform that is unknown to me. The best days in the office is when a project is waiting for me to architect or write. In my 15 years in the development field, I had to in order to get a better salary to manage people, not just to lead developers, to actually manage people. Something that I found out when I get into a management position is that I’m not that good at managing people, and not afraid to say it. I do not enjoy that part of the job, the worse one, takes time away from what I really like. Leading developers and managing people are very different things. I do like teaching and leading developers in a project. Yet most people believe, and is true in most companies, the way to get a better salary is to be promoted to a manager position. In order to advance in your career you need to let go of the everyday writing code and become a supervisor or manager. This is the path for developers after they become senior developers. As you get older and your family grows, the only way to hit your salary requirements is to advance your career to become a manager and get that manager salary. That path is the common in most companies, the most intelligent companies out there, have learned that promoting good developers mean getting a crappy manager and losing a good resource. Now scratch everything I said, because as I previously stated, I don’t see myself going to the office everyday and just managing people until is time to go home. I like to spend hours working in some code to accomplish a task, learning new platforms and languages or patterns to existing languages. Being interrupted every 15 minutes by emails or people stopping by my office to resolve their problems, is not something I could enjoy. All the sudden riding my motorcycle to work one cold morning over the Redlands Canyon and listening to .NET Rocks podcast, Michael “Doc” Norton explaining how to take control of your development career without necessary going to the manager’s track. I know, I should not have headphones under my helmet when riding a motorcycle in California. His conversation with Carl Franklin and Richard Campbell was just confirming everything I have ever did with actually more details and assuring that there are other paths. His method was simple yet most of us, already do many of those steps, Mr. Michael “Doc” Norton believe that it pays off on the long run, that finally companies prefer to pay higher salaries to those developers, yet I would actually think that many companies do not see developers that way, this is not true for bigger companies. However I do believe the value of those developers increase and most of the time, changing companies could increase their salary instead of staying in the same one. In short without even trying to get into the shadow of Mr. Norton and without following the steps in the order; you should love to learn new technologies, and then teach them to other geeks. I personally have learn many technologies and I haven’t stop doing that, I am a professor at UCR where I teach ASP.NET and Silverlight. Mr Norton continues that after than, you want to be involve in the development community, user groups, online forums, open source projects. I personally talk to user groups, I’m very active in forums asking and answering questions as well as for those I got awarded the Microsoft MVP for ASP.NET. After you accomplish all those, you should also expose yourself for what you know and what you do not know, learning a new language will make you humble again as well as extremely happy. There is no better feeling that learning a new language or pattern in your daily job. If you love your job everyday and what you do, I really recommend you to follow Michael’s presentation that he kindly share it on the link below. His confirmation is a refreshing, knowing that my future is not behind a desk where the computer screen is on my right hand side instead of in front of me. Where I don’t have to spent the days filling up performance forms for people and the new platforms that I haven’t been using yet are just at my fingertips. Presentation here. http://www.slideshare.net/LeanDog/take-control-of-your-development-career-michael-doc-norton?from=share_email_logout3 Take Control of Your Development Career Welcome! Michael “Doc” Norton @DocOnDev http://docondev.blogspot.com/ [email protected] Recovering Post Technical I love to learn I love to teach I love to work in teams I love to write code I really love to write code What about YOU? Do you love your job? Do you love your Employer? Do you love your Boss? What do you love? What do you really love? Take Control Take Control • Get Noticed • Get Together • Get Your Mojo • Get Naked • Get Schooled Get Noticed Get Noticed Know Your Business Get Noticed Get Noticed Understand Management Get Noticed Get Noticed Do Your Existing Job Get Noticed Get Noticed Make Yourself Expendable Get Together Get Together Join a User Group Get Together Help Run a User Group Get Together Start a User Group Get Your Mojo Get Your Mojo Kata Get Your Mojo Koans Get Your Mojo Breakable Toys Get Your Mojo Open Source Get Naked Get Naked Run with Group A Get Naked Do Something Different Get Naked Own Your Mistakes Get Naked Admit You Don’t Know Get Schooled Get Schooled Choose a Mentor Get Schooled Attend Conferences Get Schooled Teach a New Subject Get Started Read These (Again) Take Control of Your Development Career Thank You! Michael “Doc” Norton @DocOnDev http://docondev.blogspot.com/ [email protected] In a short summary, I recommend any developer to check his blog and more important his presentation, I haven’t been lucky enough to watch him live, I’m looking forward the day I have the opportunity. He is giving us hope in the future of developers, when I see some of my geek friends moving to position that in short years they begin to regret, I get more unsure of my future doing what I love. I would say that now is looking at the spectrum of companies that understand and appreciate developers. There are a few there, hopefully with time code sweat shops will start disappearing and being a developer will feed a family of 4. Cheers Al tweetmeme_url = 'http://weblogs.asp.net/albertpascual/archive/2010/12/07/career-development-as-a-software-developer-without-becoming-a-manager.aspx'; tweetmeme_source = 'alpascual';

    Read the article

  • Visiting the Emtel Data Centre

    Back in February at the first event of the Emtel Knowledge Series (EKS) I spoke to various people at Emtel about their data centre here on the island. I was trying to see whether it would be possible to arrange a meeting over there for a selected group of our community members. Well, let's say it like this... My first approach wasn't that promising and far from successful but during the following months there were more and more occasions to get in touch with the "right" contact persons at Emtel to make it happen... Setting up an appointment and pre-requisites The major improvement came during a Boot Camp for Windows Phone 8.1 App development organised by Microsoft Indian Ocean Islands in cooperation with Emtel at the Emtel World, Ebene. Apart from learning bits and pieces regarding Universal Apps I took the opportunity to get in touch with Arvin Lockee, Sales Executive - Data, during our lunch break. And this really kicked off the whole procedure. Prior to get access to the Emtel data centre it is requested that you provide full name and National ID of anyone going to visit. Also, it should be noted that there was only a limited amount of seats available. Anyways, packed with this information I posted through the usual social media channels. Responses came in very quickly and based on First-come, first-serve (FCFS) principle I noted down the details and forwarded them to Emtel in order to fix a date and time for the visit. In preparation on our side, all attendees exchanged contact details and we organised transport options to go to the data centre in Arsenal. The day before and on the day of our meeting, Arvin send me a reminder to check whether everything is still confirmed and ready to go... Of course, it was! Arriving at the Emtel Data Centre As I'm coming from Flic En Flac towards the North, we agreed that I'm going to pick up a couple of young fellows near the old post office in Port Louis. All went well, except that Sean eventually might be living in another time zone compared to the rest of us. Anyway, after some extended stop we were complete and arrived just in time in Arsenal to meet and greet with Ish and Veer. Again, Emtel is taking access procedures to their data centre very serious and the gate stayed close until all our IDs had been noted and compared to the list of registered attendees. Despite having a good laugh at the mixture of old and new ID cards it was a straight-forward processing. The ward was very helpful and guided us to the waiting area at the entrance section of the building. Shortly after we were welcomed by Kamlesh Bokhoree, the Data Centre Officer. He gave us brief introduction into the rules and regulations during our visit, like no photography allowed, not touching the buttons, and following his instructions through the whole visit. Of course! Inside the data centre Next, he explained us the multi-factor authentication system using a combination of bio-metric data, like finger print reader, and "classic" pin panel. The Emtel data centre provides multiple services and next to co-location for your own hardware they also offer storage options for your backup and archive data in their massive, fire-resistant vault. Very impressive to get to know about the considerations that have been done in choosing the right location and how to set up the whole premises. It should also be noted that there is 24/7 CCTV surveillance inside and outside the buildings. Strengths of the Emtel TIER 3 Data Centre, Mauritius Finally, we were guided into the first server room. And wow, the whole setup is cleverly planned and outlined in the architecture. From the false floor and ceilings in order to provide optimum air flow, over to the separation of cold and hot aisles between the full-size server racks, and of course the monitored air conditions in order to analyse and watch changes in temperature, smoke detection and other parameters. And not surprisingly everything has been implemented in two independent circuits. There is a standardised classification for the construction and operation of data centres world-wide, and the Emtel's one has been designed to be a TIER 4 building but due to the lack of an alternative power supplier on the island it is officially registered as a TIER 3 compliant data centre. Maybe in the long run there might be a second supplier of energy next to CEB... time will tell. Luckily, the data centre is integrated into the National Fibre Optic Gigabit Ring and Emtel already connects internationally through diverse undersea cable routes like SAFE & LION/LION2 out of Mauritius and through several other providers for onwards connectivity. The data centre is part of the National Fibre Optic Gigabit Ring and has redundant internet connectivity onwards. Meanwhile, Arvin managed to join our little group of geeks and he supported Kamlesh in answering our technical questions regarding the capacities and general operation of the data centre. Visiting the NOC and its dedicated team of IT professionals was surely one of the visual highlights. Seeing their wall of screens to monitor any kind of activities on the data lines, the managed servers and the activity in and around the building was great. Even though I'm using a multi-head setup since years I cannot keep it up with that setup... ;-) But I got a couple of ideas on how to improve my work spaces here at the office. Clear advantages of hosting your e-commerce and mobile backends locally After the completely isolated NOC area we continued our Q&A session with Kamlesh and Arvin in the second server room which is dedictated to shared environments. On first thought it should be well-noted that there is lots of space for full-sized racks and therefore co-location of your own hardware. Actually, given the feedback that there will be upcoming changes in prices the facilities at the Emtel data centre are getting more and more competitive and interesting for local companies, especially small and medium enterprises. After seeing this world-class infrastructure available on the island, I'm already considering of moving one of my root servers abroad to be co-located here on the island. This would provide an improved user experience in terms of site performance and latency. This would be a good improvement, especially for upcoming e-commerce solutions for two of my local clients. Later on, we actually started the conversation of additional services that could be a catalyst for the local market in order to attract more small and medium companies to take the data centre into their evaluations regarding online activities. Until today Emtel does not provide virtualised server environments but there might be ongoing plans in the future to cover this field as well. Emtel is a mobile operator and internet connectivity provider in the first place, entering a market of managed and virtualised server infrastructures including capacities in terms of cloud storage and computing are rather new and there is a continuous learning curve at Emtel, too. You cannot just jump into a new market and see how it works out... And I appreciate Emtel's approach towards a solid fundament and then building new services on top of that. Emtel as a future one-stop-shop service provider for all your internet and telecommunications needs. Emtel's promotional video about their TIER 3 data centre in Arsenal, Mauritius More details are thoroughly described in Emtel's brochure of their data centre. Check out their PDF document here. Thanks for this opportunity Visiting and walking through the Emtel data centre for more than 2 hours was a great experience. As representative of the Mauritius Software Craftsmanship Community (MSCC) I would like to thank anyone at Emtel involved in the process of making it happen, and especially to Arvin Lockee and Kamlesh Bokhoree for their time and patience in explaining the infrastructure and answering all the endless questions from our members. Thank You!

    Read the article

  • WP7 Tips–Part I– Media File Coding Techniques to help pass the Windows Phone 7 Marketplace Certification Requirements

    - by seaniannuzzi
    Overview Developing an application that plays media files on a Windows Phone 7 Device seems fairly straight forward.  However, what can make this a bit frustrating are the necessary requirements in order to pass the WP7 marketplace requirements so that your application can be published.  If you are new to this development, be aware of these common challenges that are likely to be made.  Below are some techniques and recommendations on how optimize your application to handle playing MP3 and/or WMA files that needs to adhere to the marketplace requirements.   Windows Phone 7 Certification Requirements Windows Phone 7 Developers Blog   Some common challenges are: Not prompting the user if another media file is playing in the background before playing your media file Not allowing the user to control the volume Not allowing the user to mute the sound Not allowing the media to be interrupted by a phone call  To keep this as simple as possible I am only going to focus on what “not to do” and what “to do” in order to implement a simple media solution. Things you will need or may be useful to you before you begin: Visual Studio 2010 Visual Studio 2010 Feature Packs Windows Phone 7 Developer Tools Visual Studio 2010 Express for Windows Phone Windows Phone Emulator Resources Silverlight 4 Tools For Visual Studio XNA Game Studio 4.0 Microsoft Expression Blend for Windows Phone Note: Please keep in mind you do not need all of these downloaded and installed, it is just easier to have all that you need now rather than add them on later.   Objective Summary Create a Windows Phone 7 – Windows Media Sample Application.  The application will implement many of the required features in order to pass the WP7 marketplace certification requirements in order to publish an application to WP7’s marketplace. (Disclaimer: I am not trying to indicate that this application will always pass as the requirements may change or be updated)   Step 1: – Create a New Windows Phone 7 Project   Step 2: – Update the Title and Application Name of your WP7 Application For this example I changed: the Title to: “DOTNETNUZZI WP7 MEDIA SAMPLE - v1.00” and the Page Title to:  “media magic”. Note: I also updated the background.   Step 3: – XAML - Media Element Preparation and Best Practice Before we begin the next step I just wanted to point out a few things that you should not do as a best practice when developing an application for WP7 that is playing music.  Please keep in mind that these requirements are not the same if you are playing Sound Effects and are geared towards playing media in the background.   If you have coded this – be prepared to change it:   To avoid a failure from the market place remove all of your media source elements from your XAML or simply create them dynamically.  To keep this simple we will remove the source and set the AutoPlay property to false to ensure that there are no media elements are active when the application is started. Proper example of the media element with No Source:   Some Additional Settings - Add XAML Support for a Mute Button   Step 4: – Boolean to handle toggle of Mute Feature Step 5: – Add Event Handler for Main Page Load   Step 6: – Add Reference to the XNA Framework   Step 7: – Add two Using Statements to Resolve the Namespace of Media and the Application Bar using Microsoft.Xna.Framework.Media; using Microsoft.Phone.Shell;   Step 8: – Add the Method to Check the Media State as Shown Below   Step 9: – Add Code to Mute the Media File Step 10: – Add Code to Play the Media File //if the state of the media has been checked you are good to go. media_sample.Play(); Note: If we tried to perform this operation at this point you will receive the following error: System.InvalidOperationException was unhandled Message=FrameworkDispatcher.Update has not been called. Regular FrameworkDispatcher.Update calls are necessary for fire and forget sound effects and framework events to function correctly. See http://go.microsoft.com/fwlink/?LinkId=193853 for details. StackTrace:        at Microsoft.Xna.Framework.FrameworkDispatcher.AddNewPendingCall(ManagedCallType callType, UInt32 arg)        at Microsoft.Xna.Framework.UserAsyncDispatcher.HandleManagedCallback(ManagedCallType managedCallType, UInt32 managedCallArgs) at Microsoft.Xna.Framework.UserAsyncDispatcher.AsyncDispatcherThreadFunction()            It is not recommended that you just add the FrameworkDispatcher.Update(); call before playing the media file. It is recommended that you implement the following class to your solution and implement this class in the app.xaml.cs file.   Step 11: – Add FrameworkDispatcher Features I recommend creating a class named XNAAsyncDispatcher and adding the following code:   After you have added the code accordingly, you can now implement this into your app.xaml.cs file as highlighted below.   Note:  If you application sound file is not playing make sure you have the proper “Build Action” set such as Content.   Running the Sample Now that we have some of the foundation created you should be able to run the application successfully.  When the application launches your sound options should be set accordingly when the “checkMediaState” method is called.  As a result the application will properly setup the media options and/or alert the user accordinglyper the certification requirements.  In addition, the sample also shows a quick way to mute the sound in your application by simply removing the URI source of the media file.  If everything successfully compiled the application should look similar to below.                 <sound playing>   Summary At this point we have a fully functional application that provides techniques on how to avoid some common challenges when working with media files and developing applications for Windows Phone 7.  The techniques mentioned above should make things a little easier and helpful in getting your WP7 application approved and published on the Marketplace.  The next blog post will be titled: WP7 Tips–Part II - How to write code that will pass the Windows Phone 7 Marketplace Requirements for Themes (light and dark). If anyone has any questions or comments please comment on this blog. 

    Read the article

  • When OneTug Just Isn&rsquo;t Enough&hellip;

    - by onefloridacoder
    I stole that from the back of a T-shirt I saw at the Orlando Code Camp 2010.  This was my first code camp and my first time volunteering for an event like this as well.  It was an awesome day.  I cannot begin to count the “aaahh”, “I did-not-know I could do that”, in the crowds and for myself.  I think it was a great day of learning for everyone at all levels.  All of the presenters were different and provided great insights into the topics they were presenting.  Here’s a list of the ones that I attended. KodeFuGuru, “Pirates vs. Ninjas” He touched on many good topics to relax some of the ways we think when we are writing out code, and still looks good, readable, etc.  As he pointed out in all of his examples, we might not always realize everything that’s going on under the covers.  He exposed a bug in his own code, and verbalized the mental gymnastics he went through when he knew there was something wrong with one of his IEnumerable implementations.  For me, it was great to hear that someone else labors over these gut reactions to code quickly snapped together, to the point that we rush to the refactor stage to fix what’s bothering us – and learn.  He has some content on extension methods that was very interesting.  My “that is so cool” moment was when he swapped out AddEntity method on an entity class and used a With extension method instead.  Some of the LINQ scales fell off my eyes at that moment, and I realized my own code could be a lot more powerful (and readable) if incorporate a few of these examples at the appropriate times.  And he cautioned as well… “don’t go crazy with this stuff”, there’s a place and time for everything.  One of his examples demo’d toward the end of the talk is on his sight where he’s chaining methods together, cool stuff. Quotes I liked: “Extension Methods - Extension methods to put features back on the model type, without impacting the type.” “Favor Declarative Code” – Check out the ? and ?? operators if you’re not already using them. “Favor Fluent Code” “Avoid Pirate Ninja Zombies!  If you see one run!” I’m definitely going to be looking at “Extract Projection” when I get into VS2010. BDD 101 – Sean Chambers http://github.com/schambers This guy had a whole host of gremlins against him, final score Sean 5, Gremlins 1.  He ran the code samples from his github repo  in the code github code viewer since the PC they school gave him to use didn’t have VS installed. He did a great job of converting the grammar between BDD and TDD, and how this style of development can be used in integration tests as well as the different types of gated builds on a CI box – he didn’t go into a discussion around CI, but we could infer that it could work. Like when we use WSSF, it does cause a class explosion to happen however the amount of code per class it limit to just covering the concern at hand – no more, no less.  As in “When I as a <Role>, expect {something} to happen, because {}”  This keeps us (the developer) from gold plating our solutions and creating less waste.  He basically keeps the code that prove out the requirement to two lines of code.  Nice. He uses SpecUnit to merge this grammar into his .NET projects and gave an overview on how this ties into writing his own BDD tests.  Some folks were familiar with Given / When / Then as story acceptance criteria and here’s how he mapped it: “Given <Context>  When <Something Happens> Then <I expect...>”  There are a few base classes and overrides in the SpecUnit framework that help with setting up the context for each test which looked very handy. Successfully Running Your Own Coding Business The speaker ran through a list of items that sounded like common sense stuff LLC, banking, separating expenses, etc.  Then moved into role playing with business owners and an ISV.  That was pretty good stuff, it pays to be a good listener all of the time even if your client is sitting on the other side of the phone tearing you head off for you – but that’s all it is, and get used to it its par for the course.  Oh, yeah always answer the phone was one simple thing that you can do to move  your business forward.  But like Cory Foy tweeted this week, “If you owe me a lot of money, don’t have a message that says your away for five weeks skiing in Colorado.”  Lots of food for thought that’s on my list of “todo’s and to-don’ts”. Speaker Idol Next, I had the pleasure of helping Russ Fustino tape this part of Code Camp as my primary volunteer opportunity that day.  You remember Russ, “know the code” from the awesome Russ’ Tool Shed series.  He did a great job orchestrating and capturing the Speaker Idol finals.   So I didn’t actually miss any sessions, but was able to see three back to back in one setting.  The idol finalists gave a 10 minute talk and very deep subjects, but different styles of talks.  No one walked away empty handed for jobs very well done.  Russ has details on his site.  The pictures and  video captured is supposed to be published on Channel 9 at a later date.  It was also a valuable experience to see what makes technical speakers effective in their talks.  I picked up quite a few speaking tips from what I heard from the judges and contestants. Design For Developers – Diane Leeper If you are a great developer, you’re probably a lousy designer.  Diane didn’t come to poke holes in what we think we can do with UI layout and design, but she provided some tools we can use to figure out metaphors for visualizing data.  If you need help with that check out Silverlight Pivot – that’s what she was getting at.  I was first introduced to her at one of John Papa’s talks last year at a Lakeland User Group meeting and she’s very passionate about design.  She was able to discuss different elements of Pivot, while to a developer is just looked cool. I believe she was providing the deck from her talk to folks after her talk, so send her an email if you’re interested.   She says she can talk about design for hours and hours – we all left that session believing her.   Rinse and Repeat Orlando Code Camp 2010 was awesome, and would totally do it again.  There were lots of folks from my shop there, and some that have left my shop to go elsewhere.  So it was a reunion of sorts and a great celebration for the simple fact that its great to be a developer and there’s a community that supports and recognizes it as well.  The sponsors were generous and the organizers were very tired, namely Esteban Garcia and Will Strohl who were responsible for making a lot of this magic happen.  And if you don’t believe me, check out the chatter on Twitter.

    Read the article

  • Exploring the Excel Services REST API

    - by jamiet
    Over the last few years Analysis Services guru Chris Webb and I have been on something of a crusade to enable better access to data that is locked up in countless Excel workbooks that litter the hard drives of enterprise PCs. The most prominent manifestation of that crusade up to now has been a forum thread that Chris began on Microsoft Answers entitled Excel Web App API? Chris began that thread with: I was wondering whether there was an API for the Excel Web App? Specifically, I was wondering if it was possible (or if it will be possible in the future) to expose data in a spreadsheet in the Excel Web App as an OData feed, in the way that it is possible with Excel Services? Up to recently the last 10 words of that paragraph "in the way that it is possible with Excel Services" had completely washed over me however a comment on my recent blog post Thoughts on ExcelMashup.com (and a rant) by Josh Booker in which Josh said: Excel Services is a service application built for sharepoint 2010 which exposes a REST API for excel documents. We're looking forward to pros like you giving it a try now that Office365 makes sharepoint more easily accessible.  Can't wait for your future blog about using REST API to load data from Excel on Offce 365 in SSIS. made me think that perhaps the Excel Services REST API is something I should be looking into and indeed that is what I have been doing over the past few days. And you know what? I'm rather impressed with some of what Excel Services' REST API has to offer. Unfortunately Excel Services' REST API also has one debilitating aspect that renders this blog post much less useful than it otherwise would be; namely that it is not publicly available from the Excel Web App on SkyDrive. Therefore all I can do in this blog post is show you screenshots of what the REST API provides in Sharepoint rather than linking you directly to those REST resources; that's a great shame because one of the benefits of a REST API is that it is easily and ubiquitously demonstrable from a web browser. Instead I am hosting a workbook on Sharepoint in Office 365 because that does include Excel Services' REST API but, again, all I can do is show you screenshots. N.B. If anyone out there knows how to make Office-365-hosted spreadsheets publicly-accessible (i.e. without requiring a username/password) please do let me know (because knowing which forum on which to ask the question is an exercise in futility). In order to demonstrate Excel Services' REST API I needed some decent data and for that I used the World Tourism Organization Statistics Database and Yearbook - United Nations World Tourism Organization dataset hosted on Azure Datamarket (its free, by the way); this dataset "provides comprehensive information on international tourism worldwide and offers a selection of the latest available statistics on international tourist arrivals, tourism receipts and expenditure" and you can explore the data for yourself here. If you want to play along at home by viewing the data as it exists in Excel then it can be viewed here. Let's dive in.   The root of Excel Services' REST API is the model resource which resides at: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model Note that this is true for every workbook hosted in a Sharepoint document library - each Excel workbook is a RESTful resource. (Update: Mark Stacey on Twitter tells me that "It's turned off by default in onpremise Sharepoint (1 tickbox to turn on though)". Thanks Mark!) The data is provided as an ATOM feed but I have Firefox's feed reading ability turned on so you don't see the underlying XML goo. As you can see there are four top level resources, Ranges, Charts, Tables and PivotTables; exploring one of those resources is where things get interesting. Let's take a look at the Tables Resource: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables Our workbook contains only one table, called ‘Table1’ (to reiterate, you can explore this table yourself here). Viewing that table via the REST API is pretty easy, we simply append the name of the table onto our previous URI: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1') As you can see, that quite simply gives us a representation of the data in that table. What you cannot see from this screenshot is that this is pure HTML that is being served up; that is all well and good but actually we can do more interesting things. If we specify that the data should be returned not as HTML but as: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1')?$format=image then that data comes back as a pure image and can be used in any web page where you would ordinarily use images. This is the thing that I really like about Excel Services’ REST API – we can embed an image in any web page but instead of being a copy of the data, that image is actually live – if the underlying data in the workbook were to change then hitting refresh will show a new image. Pretty cool, no? The same is true of any Charts or Pivot Tables in your workbook - those can be embedded as images too and if the underlying data changes, boom, the image in your web page changes too. There is a lot of data in the workbook so the image returned by that previous URI is too large to show here so instead let’s take a look at a different resource, this time a range: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15') That URI returns cells A1 to C15 from a worksheet called “Data”: And if we ask for that as an image again: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15')?$format=image Were this image resource not behind a username/password then this would be a live image of the data in the workbook as opposed to one that I had to copy and upload elsewhere. Nonetheless I hope this little wrinkle doesn't detract from the inate value of what I am trying to articulate here; that an existing image in a web page can be changed on-the-fly simply by inserting some data into an Excel workbook. I for one think that that is very cool indeed! I think that's enough in the way of demo for now as this shows what is possible using Excel Services' REST API. Of course, not all features work quite how I would like and here is a bulleted list of some of my more negative feedback: The URIs are pig-ugly. Are "_vti_bin" & "ExcelRest.aspx" really necessary as part of the URI? Would this not be better: http://server/Documents/TourismExpenditureInMillionsOfUSD.xlsx/Model/Tables(‘Table1’) That URI provides the necessary addressability and is a lot easier to remember. Discoverability of these resources is not easy, we essentially have to handcrank a URI ourselves. Take the example of embedding a chart into a blog post - would it not be better if I could browse first through the document library to an Excel workbook and THEN through the workbook to the chart/range/table that I am interested in? Call it a wizard if you like. That would be really cool and would, I am sure, promote this feature and cut down on the copy-and-paste disease that the REST API is meant to alleviate. The resources that I demonstrated can be returned as feeds as well as images or HTML simply by changing the format parameter to ?$format=atom however for some inexplicable reason they don't return OData and no-one on the Excel Services team can tell me why (believe me, I have asked). $format is an OData parameter however other useful parameters such as $top and $filter are not supported. It would be nice if they were. Although I haven't demonstrated it here Excel Services' REST API does provide a makeshift way of altering the data by changing the value of specific cells however what it does not allow you to do is add new data into the workbook. Google Docs allows this and was one of the motivating factors for Chris Webb's forum post that I linked to above. None of this works for Excel workbooks hosted on SkyDrive This blog post is as long as it needs to be for a short introduction so I'll stop now. If you want to know more than I recommend checking out a few links: Excel Services REST API documentation on MSDNSo what does REST on Excel Services look like??? by Shahar PrishExcel Services in SharePoint 2010 REST API Syntax by Christian Stich. Any thoughts? Let's hear them in the comments section below! @Jamiet 

    Read the article

  • Who is Jeremiah Owyang?

    - by Michael Hylton
    12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group.  I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara.  Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time:  1) The Dynamic Customer Journey:  Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations.  Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this.  2) One of the sub themes that supports this trend is Social Performance.  Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation.  As you might expect, this comes with upsides and downsides.  3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond.  Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not.  It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond.  In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires.  All of this is being ironically written at 430 am on a Sunday am.  Q: How can people keep up with what you’re working on? J.O.: A great question, thanks.  There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com.  A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang.  As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now.  http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon?  J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast?  J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

    Read the article

  • Who is Jeremiah Owyang?

    - by Michael Snow
    12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group.  I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara.  Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time:  1) The Dynamic Customer Journey:  Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations.  Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this.  2) One of the sub themes that supports this trend is Social Performance.  Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation.  As you might expect, this comes with upsides and downsides.  3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond.  Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not.  It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond.  In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires.  All of this is being ironically written at 430 am on a Sunday am.  Q: How can people keep up with what you’re working on? J.O.: A great question, thanks.  There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com.  A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang.  As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now.  http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon?  J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast?  J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

    Read the article

  • Documenting C# Library using GhostDoc and SandCastle

    - by sreejukg
    Documentation is an essential part of any IT project, especially when you are creating reusable components that will be used by other developers (such as class libraries). Without documentation re-using a class library is almost impossible. Just think of coding .net applications without MSDN documentation (Ooops I can’t think of it). Normally developers, who know the bits and pieces of their classes, see this as a boring work to write details again to generate the documentation. Also the amount of work to make this and manage it changes made the process of manual creation of Documentation impossible or tedious. So what is the effective solution? Let me divide this into two steps 1. Generate comments for your code while you are writing the code. 2. Create documentation file using these comments. Now I am going to examine these processes. Step 1: Generate XML Comments automatically Most of the developers write comments for their code. The best thing is that the comments will be entered during the development process. Additionally comments give a good reference to the code, make your code more manageable/readable. Later these comments can be converted into documentation, along with your source code by identifying properties and methods I found an add-in for visual studio, GhostDoc that automatically generates XML documentation comments for C#. The add-in is available in Visual Studio Gallery at MSDN. You can download this from the url http://visualstudiogallery.msdn.microsoft.com/en-us/46A20578-F0D5-4B1E-B55D-F001A6345748. I downloaded the free version from the above url. The free version suits my requirement. There is a professional version (you need to pay some $ for this) available that gives you some more features. I found the free version itself suits my requirements. The installation process is straight forward. A couple of clicks will do the work for you. The best thing with GhostDoc is that it supports multiple versions of visual studio such as 2005, 2008 and 2010. After Installing GhostDoc, when you start Visual studio, the GhostDoc configuration dialog will appear. The first screen asks you to assign a hot key, pressing this hotkey will enter the comment to your code file with the necessary structure required by GhostDoc. Click Assign to go to the next step where you configure the rules for generating the documentation from the code file. Click Create to start creating the rules. Click finish button to close this wizard. Now you performed the necessary configuration required by GhostDoc. Now In Visual Studio tools menu you can find the GhostDoc that gives you some options. Now let us examine how GhostDoc generate comments for a method. I have write the below code in my code behind file. public Char GetChar(string str, int pos) { return str[pos]; } Now I need to generate the comments for this function. Select the function and enter the hot key assigned during the configuration. GhostDoc will generate the comments as follows. /// <summary> /// Gets the char. /// </summary> /// <param name="str">The STR.</param> /// <param name="pos">The pos.</param> /// <returns></returns> public Char GetChar(string str, int pos) { return str[pos]; } So this is a very handy tool that helps developers writing comments easily. You can generate the xml documentation file separately while compiling the project. This will be done by the C# compiler. You can enable the xml documentation creation option (checkbox) under Project properties -> Build tab. Now when you compile, the xml file will created under the bin folder. Step 2: Generate the documentation from the XML file Now you have generated the xml file documentation. Sandcastle is the tool from Microsoft that generates MSDN style documentation from the compiler produced XML file. The project is available in codeplex http://sandcastle.codeplex.com/. Download and install Sandcastle to your computer. Sandcastle is a command line tool that doesn’t have a rich GUI. If you want to automate the documentation generation, definitely you will be using the command line tools. Since I want to generate the documentation from the xml file generated in the previous step, I was expecting a GUI where I can see the options. There is a GUI available for Sandcastle called Sandcastle Help File Builder. See the link to the project in codeplex. http://www.codeplex.com/wikipage?ProjectName=SHFB. You need to install Sandcastle and then the Sandcastle Help file builder. From here I assume that you have installed both sandcastle and Sandcastle help file builder successfully. Once you installed the help file builder, it will be available in your all programs list. Click on the Sandcastle Help File Builder GUI, will launch application. First you need to create a project. Click on File -> New project The New project dialog will appear. Choose a folder to store your project file and give a name for your documentation project. Click the save button. Now you will see your project properties. Now from the Project explorer, right click on the Documentation Sources, Click on the Add Documentation Source link. A documentation source is a file such as an assembly or a Visual Studio solution or project from which information will be extracted to produce API documentation. From the Add Documentation source dialog, I have selected the XML file generated by my project. Once you add the xml file to the project, you will see the dll file automatically added by the help file builder. Now click on the build button. Now the application will generate the help file. The Build window gives to the result of each steps. Once the process completed successfully, you will have the following output in the build window. Now navigate to your Help Project (I have selected the folder My Documents\Documentation), inside help folder, you can find the chm file. Open the chm file will give you MSDN like documentation. Documentation is an important part of development life cycle. Sandcastle with GhostDoc make this process easier so that developers can implement the documentation in the projects with simple to use steps.

    Read the article

  • Conversion of BizTalk Projects to Use the New WCF-SAP Adaptor

    - by Geordie
    We are in the process of upgrading our BizTalk Environment from BizTalk 2006 R2 to BizTalk 2010. The SAP adaptor in BizTalk 2010 is an all new and more powerful WCF-SAP adaptor. When my colleagues tested out the new adaptor they discovered that the format of the data extracted from SAP was not identical to the old adaptor. This is not a big deal if the structure of the messages from SAP is simple. In this case we were receiving the delivery and invoice iDocs. Both these structures are complex especially the delivery document. Over the past few years I have tweaked the delivery mapping to remove bugs from original mapping. The idea of redoing these maps did not appeal and due to the current work load was not even an option. I opted for a rather crude alternative of pulling in the iDoc in the new typed format and then adding a static map at the start of the orchestration to convert the data to the old schema.  Note WCF-SAP data formats (on the binding tab of the configuration dialog box is the ‘RecieiveIdocFormat’ field): Typed:  Returns a XML document with the hierarchy represented in XML and all fields being represented by XML tags. RFC: Returns an XML document with the hierarchy represented in XML but the iDoc lines in flat file format. String: This returns the iDoc in a format that is closest to the original flat file format but is still wrapped with some top level XML tags. The files also contained some strange characters at the end of each line. I started with the invoice document and it was quite straight forward to add the mapping but this is where my problems started. The orchestrations for these documents are dynamic and so require the identity of the partner to be able to correctly configure the orchestration. The partner identity is in the EDI_DC40 segment of the iDoc. In the old project the RECPRN node of the segment was promoted. The code to set a variable to the partner ID was now failing. After lot of head scratching I discovered the problem was due to the addition of Namespaces to the fields in the EDI_DC40 segment. To overcome this I needed to use an xPath query with a Namespace Manager. This had to be done in custom code. I now tried to repeat the process with the delivery document. Unfortunately when we tried to get sample typed data from SAP an exception was thrown. The adapter "WCF-SAP" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E2EDKA1001 was not found in the IDoc metadata. The UniqueId of the IDoc type is: IDOCTYP/3/DESADV01/ZASNEXT1/640. For Receive operations, the SAP adapter does not support unreleased segments.   Our guess is that when the WCF-SAP adaptor tries to down load the data it retrieves a data schema from SAP. For some reason the schema does not match the data. This may be due to the version of SAP we are running or due to a customization. Either way resolving this problem did not look easy. When doing some research on this problem I found an article showing me how to get the data from SAP using the WCF-SAP adaptor without any XML tags. http://blogs.msdn.com/b/adapters/archive/2007/10/05/receiving-idocs-getting-the-raw-idoc-data.aspx Reproduction of Mustansir blog: Since the WCF based SAP Adapter is ... well, WCF based, all data flowing in and out of the adapter is encapsulated within a SOAP message. Which means there are those pesky xml tags all over the place. If you want to receive an Idoc from SAP, you can receive it in "Typed" format (in which case each column in each segment of the idoc appears within its own xml tag), or you can receive it in "String" format (in which case there are just 2 xml tags at the top, the raw xml data in string/flat file format, and the 2 closing xml tags). In "String" format, an incoming idoc (for ORDERS05, containing 5 data records) would look like: <ReceiveIdoc ><idocData>EDI_DC40 8000000000001064985620 E2EDK01005 800000000000106498500000100000001 E2EDK14 8000000000001064985000002000000020111000 E2EDK14 8000000000001064985000003000000020081000 E2EDK14 80000000000010649850000040000000200710 E2EDK14 80000000000010649850000050000000200600</idocData></ReceiveIdoc> (I have trimmed part of the control record so that it fits cleanly here on one line). Now, you're only interested in the IDOC data, and don't care much for the XML tags. It isn't that difficult to write your own pipeline component, or even some logic in the orchestration to remove the tags, right? Well, you don't need to write any extra code at all - the WCF Adapter can help you here! During the configuration of your one-way Receive Location using WCF-Custom, navigate to the Messages tab. Under the section "Inbound BizTalk Messge Body", select the "Path" radio button, and: (a) Enter the body path expression as: /*[local-name()='ReceiveIdoc']/*[local-name()='idocData'] (b) Choose "String" for the Node Encoding. What we've done is, used an XPATH to pull out the value of the "idocData" node from the XML. Your Receive Location will now emit text containing only the idoc data. You can at this point, for example, put the Flat File Pipeline component to convert the flat text into a different xml format based on some other schema you already have, and receive your version of the xml formatted message in your orchestration.   This was potentially a much easier solution than adding the static maps to the orchestrations and overcame the issue with ‘Typed’ delivery documents. Not quite so fast… Note: When I followed Mustansir’s blog the characters at the end of each line disappeared. After configuring the adaptor and passing the iDoc data into the original flat file receive pipelines I was receiving exceptions. There was a failure executing the receive pipeline: "PAPINETPipelines.DeliveryFlatFileReceive, CustomerIntegration2.PAPINET.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=4ca3635fbf092bbb" Source: "Pipeline " Receive Port: "recSAP_Delivery" URI: "D:\CustomerIntegration2\SAP\Delivery\*.xml" Reason: An error occurred when parsing the incoming document: "Unexpected data found while looking for: 'Z2EDPZ7' The current definition being parsed is E2EDP07GRP. The stream offset where the error occured is 8859. The line number where the error occured is 23. The column where the error occured is 0.". Although the new flat file looked the same as the old one there was a differences. In the original file all lines in the document were exactly 1064 character long. In the new file all lines were truncated to the last alphanumeric character. The final piece of the puzzle was to add a custom pipeline component to pad all the lines to 1064 characters. This component was added to the decode node of the custom delivery and invoice flat file disassembler pipelines. Execute method of the custom pipeline component: public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg) { //Convert Stream to a string Stream s = null; IBaseMessagePart bodyPart = inmsg.BodyPart;   // NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a //getter and setter for the file adapter. Use GetOriginalDataStream to get data instead. if (bodyPart != null) s = bodyPart.GetOriginalDataStream();   string newMsg = string.Empty; string strLine; try { StreamReader sr = new StreamReader(s); strLine = sr.ReadLine(); while (strLine != null) { //Execute padding code if (strLine != null) strLine = strLine.PadRight(1064, ' ') + "\r\n"; newMsg += strLine; strLine = sr.ReadLine(); } sr.Close(); } catch (IOException ex) { throw new Exception("Error occured trying to pad the message to 1064 charactors"); }   //Convert back to stream and set to Data property inmsg.BodyPart.Data = new MemoryStream(Encoding.UTF8.GetBytes(newMsg)); ; //reset the position of the stream to zero inmsg.BodyPart.Data.Position = 0; return inmsg; }

    Read the article

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • Of C# Iterators and Performance

    - by James Michael Hare
    Some of you reading this will be wondering, "what is an iterator" and think I'm locked in the world of C++.  Nope, I'm talking C# iterators.  No, not enumerators, iterators.   So, for those of you who do not know what iterators are in C#, I will explain it in summary, and for those of you who know what iterators are but are curious of the performance impacts, I will explore that as well.   Iterators have been around for a bit now, and there are still a bunch of people who don't know what they are or what they do.  I don't know how many times at work I've had a code review on my code and have someone ask me, "what's that yield word do?"   Basically, this post came to me as I was writing some extension methods to extend IEnumerable<T> -- I'll post some of the fun ones in a later post.  Since I was filtering the resulting list down, I was using the standard C# iterator concept; but that got me wondering: what are the performance implications of using an iterator versus returning a new enumeration?   So, to begin, let's look at a couple of methods.  This is a new (albeit contrived) method called Every(...).  The goal of this method is to access and enumeration and return every nth item in the enumeration (including the first).  So Every(2) would return items 0, 2, 4, 6, etc.   Now, if you wanted to write this in the traditional way, you may come up with something like this:       public static IEnumerable<T> Every<T>(this IEnumerable<T> list, int interval)     {         List<T> newList = new List<T>();         int count = 0;           foreach (var i in list)         {             if ((count++ % interval) == 0)             {                 newList.Add(i);             }         }           return newList;     }     So basically this method takes any IEnumerable<T> and returns a new IEnumerable<T> that contains every nth item.  Pretty straight forward.   The problem?  Well, Every<T>(...) will construct a list containing every nth item whether or not you care.  What happens if you were searching this result for a certain item and find that item after five tries?  You would have generated the rest of the list for nothing.   Enter iterators.  This C# construct uses the yield keyword to effectively defer evaluation of the next item until it is asked for.  This can be very handy if the evaluation itself is expensive or if there's a fair chance you'll never want to fully evaluate a list.   We see this all the time in Linq, where many expressions are chained together to do complex processing on a list.  This would be very expensive if each of these expressions evaluated their entire possible result set on call.    Let's look at the same example function, this time using an iterator:       public static IEnumerable<T> Every<T>(this IEnumerable<T> list, int interval)     {         int count = 0;         foreach (var i in list)         {             if ((count++ % interval) == 0)             {                 yield return i;             }         }     }   Notice it does not create a new return value explicitly, the only evidence of a return is the "yield return" statement.  What this means is that when an item is requested from the enumeration, it will enter this method and evaluate until it either hits a yield return (in which case that item is returned) or until it exits the method or hits a yield break (in which case the iteration ends.   Behind the scenes, this is all done with a class that the CLR creates behind the scenes that keeps track of the state of the iteration, so that every time the next item is asked for, it finds that item and then updates the current position so it knows where to start at next time.   It doesn't seem like a big deal, does it?  But keep in mind the key point here: it only returns items as they are requested. Thus if there's a good chance you will only process a portion of the return list and/or if the evaluation of each item is expensive, an iterator may be of benefit.   This is especially true if you intend your methods to be chainable similar to the way Linq methods can be chained.    For example, perhaps you have a List<int> and you want to take every tenth one until you find one greater than 10.  We could write that as:       List<int> someList = new List<int>();         // fill list here         someList.Every(10).TakeWhile(i => i <= 10);     Now is the difference more apparent?  If we use the first form of Every that makes a copy of the list.  It's going to copy the entire list whether we will need those items or not, that can be costly!    With the iterator version, however, it will only take items from the list until it finds one that is > 10, at which point no further items in the list are evaluated.   So, sounds neat eh?  But what's the cost is what you're probably wondering.  So I ran some tests using the two forms of Every above on lists varying from 5 to 500,000 integers and tried various things.    Now, iteration isn't free.  If you are more likely than not to iterate the entire collection every time, iterator has some very slight overhead:   Copy vs Iterator on 100% of Collection (10,000 iterations) Collection Size Num Iterated Type Total ms 5 5 Copy 5 5 5 Iterator 5 50 50 Copy 28 50 50 Iterator 27 500 500 Copy 227 500 500 Iterator 247 5000 5000 Copy 2266 5000 5000 Iterator 2444 50,000 50,000 Copy 24,443 50,000 50,000 Iterator 24,719 500,000 500,000 Copy 250,024 500,000 500,000 Iterator 251,521   Notice that when iterating over the entire produced list, the times for the iterator are a little better for smaller lists, then getting just a slight bit worse for larger lists.  In reality, given the number of items and iterations, the result is near negligible, but just to show that iterators come at a price.  However, it should also be noted that the form of Every that returns a copy will have a left-over collection to garbage collect.   However, if we only partially evaluate less and less through the list, the savings start to show and make it well worth the overhead.  Let's look at what happens if you stop looking after 80% of the list:   Copy vs Iterator on 80% of Collection (10,000 iterations) Collection Size Num Iterated Type Total ms 5 4 Copy 5 5 4 Iterator 5 50 40 Copy 27 50 40 Iterator 23 500 400 Copy 215 500 400 Iterator 200 5000 4000 Copy 2099 5000 4000 Iterator 1962 50,000 40,000 Copy 22,385 50,000 40,000 Iterator 19,599 500,000 400,000 Copy 236,427 500,000 400,000 Iterator 196,010       Notice that the iterator form is now operating quite a bit faster.  But the savings really add up if you stop on average at 50% (which most searches would typically do):     Copy vs Iterator on 50% of Collection (10,000 iterations) Collection Size Num Iterated Type Total ms 5 2 Copy 5 5 2 Iterator 4 50 25 Copy 25 50 25 Iterator 16 500 250 Copy 188 500 250 Iterator 126 5000 2500 Copy 1854 5000 2500 Iterator 1226 50,000 25,000 Copy 19,839 50,000 25,000 Iterator 12,233 500,000 250,000 Copy 208,667 500,000 250,000 Iterator 122,336   Now we see that if we only expect to go on average 50% into the results, we tend to shave off around 40% of the time.  And this is only for one level deep.  If we are using this in a chain of query expressions it only adds to the savings.   So my recommendation?  If you have a resonable expectation that someone may only want to partially consume your enumerable result, I would always tend to favor an iterator.  The cost if they iterate the whole thing does not add much at all -- and if they consume only partially, you reap some really good performance gains.   Next time I'll discuss some of my favorite extensions I've created to make development life a little easier and maintainability a little better.

    Read the article

  • Granular Clipboard Control in Oracle IRM

    - by martin.abrahams
    One of the main leak prevention controls that customers are looking for is clipboard control. After all, there is little point in controlling access to a document if authorised users can simply make unprotected copies by use of the cut and paste mechanism. Oddly, for such a fundamental requirement, many solutions only offer very simplistic clipboard control - and require the customer to make an awkward choice between usability and security. In many cases, clipboard control is simply an ON-OFF option. By turning the clipboard OFF, you disable one of the most valuable edit functions known to man. Try working for any length of time without copying and pasting, and you'll soon appreciate how valuable that function is. Worse, some solutions disable the clipboard completely - not just for the protected document but for all of the various applications you have open at the time. Normal service is only resumed when you close the protected document. In this way, policy enforcement bleeds out of the particular assets you need to protect and interferes with the entire user experience. On the other hand, turning the clipboard ON satisfies a fundamental usability requirement - but also makes it really easy for users to create unprotected copies of sensitive information, maliciously or otherwise. All they need to do is paste into another document. If creating unprotected copies is this simple, you have to question how much you are really gaining by applying protection at all. You may not be allowed to edit, forward, or print the protected asset, but all you need to do is create a copy and work with that instead. And that activity would not be tracked in any way. So, a simple ON-OFF control creates a real tension between usability and security. If you are only using IRM on a small scale, perhaps security can outweigh usability - the business can put up with the restriction if it only applies to a handful of important documents. But try extending protection to large numbers of documents and large user communities, and the restriction rapidly becomes really unwelcome. I am aware of one solution that takes a different tack. Rather than disable the clipboard, pasting is always permitted, but protection is automatically applied to any document that you paste into. At first glance, this sounds great - protection travels with the content. However, at any scale this model may not be so appealing once you've had to deal with support calls from users who have accidentally applied protection to documents that really don't need it - which would be all too easily done. This may help control leakage, but it also pollutes the system with documents that have policies applied with no obvious rhyme or reason, and it can seriously inconvenience the business by making non-sensitive documents difficult to access. And what policy applies if you paste some protected content into an already protected document? Which policy applies? There are no prizes for guessing that Oracle IRM takes a rather different approach. The Oracle IRM Approach Oracle IRM offers a spectrum of clipboard controls between the extremes of ON and OFF, and it leverages the classification-based rights model to give granular control that satisfies both security and usability needs. Firstly, we take it for granted that if you have EDIT rights, of course you can use the clipboard within a given document. Why would we force you to retype a piece of content that you want to move from HERE... to HERE...? If the pasted content remains in the same document, it is equally well protected whether it be at the beginning, middle, or end - or all three. So, the first point is that Oracle IRM always enables the clipboard if you have the right to edit the file. Secondly, whether we enable or disable the clipboard, we only affect the protected document. That is, you can continue to use the clipboard in the usual way for unprotected documents and applications regardless of whether the clipboard is enabled or disabled for the protected document(s). And if you have multiple protected documents open, each may have the clipboard enabled or disabled independently, according to whether you have Edit rights for each. So, even for the simplest cases - the ON-OFF cases - Oracle IRM adds value by containing the effect to the protected documents rather than to the whole desktop environment. Now to the granular options between ON and OFF. Thanks to our classification model, we can define rights that enable pasting between documents in the same classification - ie. between documents that are protected by the same policy. So, if you are working on this month's financial report and you want to pull some data from last month's report, you can simply cut and paste between the two documents. The two documents are classified the same way, subject to the same policy, so the content is equally safe in both documents. However, if you try to paste the same data into an unprotected document or a document in a different classification, you can be prevented. Thus, the control balances legitimate user requirements to allow pasting with legitimate information security concerns to keep data protected. We can take this further. You may have the right to paste between related classifications of document. So, the CFO might want to copy some financial data into a board document, where the two documents are sealed to different classifications. The CFO's rights may well allow this, as it is a reasonable thing for a CFO to want to do. But policy might prevent the CFO from copying the same data into a classification that is accessible to external parties. The above option, to copy between classifications, may be for specific classifications or open-ended. That is, your rights might enable you to go from A to B but not to C, or you might be allowed to paste to any classification subject to your EDIT rights. As for so many features of Oracle IRM, our classification-based rights model makes this type of granular control really easy to manage - you simply define that pasting is permitted between classifications A and B, but omit C. Or you might define that pasting is permitted between all classifications, but not to unprotected locations. The classification model enables millions of documents to be controlled by a few such rules. Finally, you MIGHT have the option to paste anywhere - such that unprotected copies may be created. This is rare, but a legitimate configuration for some users, some use cases, and some classifications - but not something that you have to permit simply because the alternative is too restrictive. As always, these rights are defined in user roles - so different users are subject to different clipboard controls as required in different classifications. So, where most solutions offer just two clipboard options - ON-OFF or ON-but-encrypt-everything-you-touch - Oracle IRM offers real granularity that leverages our classification model. Indeed, I believe it is the lack of a classification model that makes such granularity impractical for other IRM solutions, because the matrix of rules for controlling pasting would be impossible to manage - there are so many documents to consider, and more are being created all the time.

    Read the article

  • iPhone SDK vs Windows Phone 7 Series SDK Challenge, Part 1: Hello World!

    In this series, I will be taking sample applications from the iPhone SDK and implementing them on Windows Phone 7 Series.  My goal is to do as much of an apples-to-apples comparison as I can.  This series will be written to not only compare and contrast how easy or difficult it is to complete tasks on either platform, how many lines of code, etc., but Id also like it to be a way for iPhone developers to either get started on Windows Phone 7 Series development, or for developers in general to learn the platform. Heres my methodology: Run the iPhone SDK app in the iPhone Simulator to get a feel for what it does and how it works, without looking at the implementation Implement the equivalent functionality on Windows Phone 7 Series using Silverlight. Compare the two implementations based on complexity, functionality, lines of code, number of files, etc. Add some functionality to the Windows Phone 7 Series app that shows off a way to make the scenario more interesting or leverages an aspect of the platform, or uses a better design pattern to implement the functionality. You can download Microsoft Visual Studio 2010 Express for Windows Phone CTP here, and the Expression Blend 4 Beta here. Hello World! Of course no first post would be allowed if it didnt focus on the hello world scenario.  The iPhone SDK follows that tradition with the Your First iPhone Application walkthrough.  I will say that the developer documentation for iPhone is pretty good.  There are plenty of walkthoughs and they break things down into nicely sized steps and do a good job of bringing the user along.  As expected, this application is quite simple.  It comprises of a text box, a label, and a button.  When you push the button, the label changes to Hello plus the  word you typed into the text box.  Makes perfect sense for a starter application.  Theres not much to this but it covers a few basic elements: Laying out basic UI Handling user input Hooking up events Formatting text     So, lets get started building a similar app for Windows Phone 7 Series! Implementing the UI: UI in Silverlight (and therefore Windows Phone 7) is defined in XAML, which is a declarative XML language also used by WPF on the desktop.  For anyone thats familiar with similar types of markup, its relatively straightforward to learn, but has a lot of power in it once you get it figured out.  Well talk more about that. This UI is very simple.  When I look at this, I note a couple of things: Elements are arranged vertically They are all centered So, lets create our Application and then start with the UI.  Once you have the the VS 2010 Express for Windows Phone tool running, create a new Windows Phone Project, and call it Hello World: Once created, youll see the designer on one side and your XAML on the other: Now, we can create our UI in one of three ways: Use the designer in Visual Studio to drag and drop the components Use the designer in Expression Blend 4 to drag and drop the components Enter the XAML by hand in either of the above Well start with (1), then kind of move to (3) just for instructional value. To develop this UI in the designer: First, delete all of the markup between inside of the Grid element (LayoutRoot).  You should be left with just this XAML for your MainPage.xaml (i shortened all the xmlns declarations below for brevity): 1: <phoneNavigation:PhoneApplicationPage 2: x:Class="HelloWorld.MainPage" 3: xmlns="...[snip]" 4: FontFamily="{StaticResource PhoneFontFamilyNormal}" 5: FontSize="{StaticResource PhoneFontSizeNormal}" 6: Foreground="{StaticResource PhoneForegroundBrush}"> 7:   8: <Grid x:Name="LayoutRoot" Background="{StaticResource PhoneBackgroundBrush}"> 9:   10: </Grid> 11:   12: </phoneNavigation:PhoneApplicationPage> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Well be adding XAML at line 9, so thats the important part. Now, Click on the center area of the phone surface Open the Toolbox and double click StackPanel Double click TextBox Double click TextBlock Double click Button That will create the necessary UI elements but they wont be arranged quite right.  Well fix it in a second.    Heres the XAML that we end up with: 1: <StackPanel Height="100" HorizontalAlignment="Left" Margin="10,10,0,0" Name="stackPanel1" VerticalAlignment="Top" Width="200"> 2: <TextBox Height="32" Name="textBox1" Text="TextBox" Width="100" /> 3: <TextBlock Height="23" Name="textBlock1" Text="TextBlock" /> 4: <Button Content="Button" Height="70" Name="button1" Width="160" /> 5: </StackPanel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The designer does its best at guessing what we want, but in this case we want things to be a bit simpler. So well just clean it up a bit.  We want the items to be centered and we want them to have a little bit of a margin on either side, so heres what we end up with.  Ive also made it match the values and style from the iPhone app: 1: <StackPanel Margin="10"> 2: <TextBox Name="textBox1" HorizontalAlignment="Stretch" Text="You" TextAlignment="Center"/> 3: <TextBlock Name="textBlock1" HorizontalAlignment="Center" Margin="0,100,0,0" Text="Hello You!" /> 4: <Button Name="button1" HorizontalAlignment="Center" Margin="0,150,0,0" Content="Hello"/> 5: </StackPanel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now lets take a look at what weve done there. Line 1: We removed all of the formatting from the StackPanel, except for Margin, as thats all we need.  Since our parent element is a Grid, by default the StackPanel will be sized to fit in that space.  The Margin says that we want to reserve 10 pixels on each side of the StackPanel. Line 2: Weve set the HorizontalAlignment of the TextBox to Stretch, which says that it should fill its parents size horizontally.  We want to do this so the TextBox is always full-width.  We also set TextAlignment to Center, to center the text. Line 3: In contrast to the TextBox above, we dont care how wide the TextBlock is, just so long as it is big enough for its text.  Thatll happen automatically, so we just set its Horizontal alignment to Center.  We also set a Margin above the TextBlock of 100 pixels to bump it down a bit, per the iPhone UI. Line 4: We do the same things here as in Line 3. Heres how the UI looks in the designer: Believe it or not, were almost done! Implementing the App Logic Now, we want the TextBlock to change its text when the Button is clicked.  In the designer, double click the Button to be taken to the Event Handler for the Buttons Click event.  In that event handler, we take the Text property from the TextBox, and format it into a string, then set it into the TextBlock.  Thats it! 1: private void button1_Click(object sender, RoutedEventArgs e) 2: { 3: string name = textBox1.Text; 4:   5: // if there isn't a name set, just use "World" 6: if (String.IsNullOrEmpty(name)) 7: { 8: name = "World"; 9: } 10:   11: // set the value into the TextBlock 12: textBlock1.Text = String.Format("Hello {0}!", name); 13:   14: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We use the String.Format() method to handle the formatting for us.    Now all thats left is to test the app in the Windows Phone Emulator and verify it does what we think it does! And it does! Comparing against the iPhone Looking at the iPhone example, there are basically three things that you have to touch as the developer: 1) The UI in the Nib file 2) The app delegate 3) The view controller Counting lines is a bit tricky here, but to try to keep this even, Im going to only count lines of code that I could not have (or would not have) generated with the tooling.  Meaning, Im not counting XAML and Im not counting operations that happen in the Nib file with the XCode designer tool.  So in the case of the above, even though I modified the XAML, I could have done all of those operations using the visual designer tool.  And normally I would have, but the XAML is more instructive (and less steps!).  Im interested in things that I, as the developer have to figure out in code.  Im also not counting lines that just have a curly brace on them, or lines that are generated for me (e.g. method names that are generated for me when I make a connection, etc.) So, by that count, heres what I get from the code listing for the iPhone app found here: HelloWorldAppDelegate.h: 6 HelloWorldAppDelegate.m: 12 MyViewController.h: 8 MyViewController.m: 18 Which gives me a grand total of about 44 lines of code on iPhone.  I really do recommend looking at the iPhone code for a comparison to the above. Now, for the Windows Phone 7 Series application, the only code I typed was in the event handler above Main.Xaml.cs: 4 So a total of 4 lines of code on Windows Phone 7.  And more importantly, the process is just A LOT simpler.  For example, I was surprised that the User Interface Designer in XCode doesnt automatically create instance variables for me and wire them up to the corresponding elements.  I assumed I wouldnt have to write this code myself (and risk getting it wrong!).  I dont need to worry about view controllers or anything.  I just write my code.  This blog post up to this point has covered almost every aspect of this apps development in a few pages.  The iPhone tutorial has 5 top level steps with 2-3 sub sections of each. Now, its worth pointing out that the iPhone development model uses the Model View Controller (MVC) pattern, which is a very flexible and powerful pattern that enforces proper separation of concerns.  But its fairly complex and difficult to understand when you first walk up to it.  Here at Microsoft weve dabbled in MVC a bit, with frameworks like MFC on Visual C++ and with the ASP.NET MVC framework now.  Both are very powerful frameworks.  But one of the reasons weve stayed away from MVC with client UI frameworks is that its difficult to tool.  We havent seen the type of value that beats double click, write code! for the broad set of scenarios. Another thing to think about is how many of those lines of code were focused on my apps functionality?.  Or, the converse of How many lines of code were boilerplate plumbing?  In both examples, the actual number of functional code lines is similar.  I count most of them in MyViewController.m, in the changeGreeting method.  Its about 7 lines of code that do the work of taking the value from the TextBox and putting it into the label.  Versus 4 on the Windows Phone 7 side.  But, unfortunately, on iPhone I still have to write that other 37 lines of code, just to get there. 10% of the code, 1 file instead of 4, its just much simpler. Making Some Tweaks It turns out, I can actually do this application with ZERO  lines of code, if Im willing to change the spec a bit. The data binding functionality in Silverlight is incredibly powerful.  And what I can do is databind the TextBoxs value directly to the TextBlock.  Take some time looking at this XAML below.  Youll see that I have added another nested StackPanel and two more TextBlocks.  Why?  Because thats how I build that string, and the nested StackPanel will lay things out Horizontally for me, as specified by the Orientation property. 1: <StackPanel Margin="10"> 2: <TextBox Name="textBox1" HorizontalAlignment="Stretch" Text="You" TextAlignment="Center"/> 3: <StackPanel Orientation="Horizontal" HorizontalAlignment="Center" Margin="0,100,0,0" > 4: <TextBlock Text="Hello " /> 5: <TextBlock Name="textBlock1" Text="{Binding ElementName=textBox1, Path=Text}" /> 6: <TextBlock Text="!" /> 7: </StackPanel> 8: <Button Name="button1" HorizontalAlignment="Center" Margin="0,150,0,0" Content="Hello" Click="button1_Click" /> 9: </StackPanel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now, the real action is there in the bolded TextBlock.Text property: Text="{Binding ElementName=textBox1, Path=Text}" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } That does all the heavy lifting.  It sets up a databinding between the TextBox.Text property on textBox1 and the TextBlock.Text property on textBlock1. As I change the text of the TextBox, the label updates automatically. In fact, I dont even need the button any more, so I could get rid of that altogether.  And no button means no event handler.  No event handler means no C# code at all.  Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >