Search Results

Search found 54503 results on 2181 pages for 'net mvc'.

Page 2141/2181 | < Previous Page | 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148  | Next Page >

  • Permission Mystery - apt-get and other system utilities have 000 permissions

    - by emteh
    I'm trying to track down this strange behavoir for years now. Always after installing software-updates the permissions of a lot of system-tools are broken as you can see below. I am reasonable convinced that the machine is not owned by someone else. Regular security updates + grsecurity kernel + pax + daily rkhunter runs. Besides that there is no incentive for an attacker to fiddle in such obvious ways with the system. I installed bastille linux (http://bastille-linux.sourceforge.net/) und tried to deinstall it later, so the problems could be related to that. However I don't see how this can happen in a regular way after updates. System: Ubuntu 10.04, recently updated to Ubuntu 12.04 but the problem persists. Apt-Configuration in /etc/apt/ looks sane to me. But nevertheless - could here be the source of the trouble? DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt || true";}; DPkg::Post-Invoke { "if [ -x /usr/bin/debsums ]; then /usr/bin/debsums -- generate=nocheck -sp /var/cache/apt/archives; fi"; }; // Makes sure that rkhunter file properties database is updated // after each remove or install only APT_AUTOGEN is enabled DPkg::Post-Invoke { "if [ -x /usr/bin/rkhunter ] && grep -qiE '^APT_AUTOGEN=.? (true|yes)' /etc/default/rkhunter; then /usr/share/rkhunter/scripts/rkhupd.sh; fi" } DPkg::Post-Invoke {"if [ -d /var/lib/update-notifier ]; then touch /var/lib/update- notifier/dpkg-run-stamp; fi; if [ -e /var/lib/update-notifier/updates-available ]; then echo > /var/lib/update-notifier/updates-available; fi "; }; Where do these chmod 000 come from? I'm feeling really uneasy with this problem. root@besen:~# find /usr/bin/ -perm 0 -ls 14721496 196 ---------- 1 root root 192592 Oct 15 11:58 /usr/bin/apt-get 14721144 68 ---------- 1 root root 63848 Sep 13 00:29 /usr/bin/gpasswd root@besen:~# find /usr/sbin/ -perm 0 -ls 1727732 92 ---------- 1 root root 86984 Sep 13 00:29 /usr/sbin/usermod 1727727 64 ---------- 1 root root 57640 Sep 13 00:29 /usr/sbin/userdel 1727719 64 ---------- 1 root root 57680 Sep 13 00:29 /usr/sbin/newusers 1727718 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/grpunconv 1727728 48 ---------- 1 root root 47088 Sep 13 00:29 /usr/sbin/groupadd 1727724 32 ---------- 1 root root 29584 Sep 13 00:29 /usr/sbin/pwunconv 19031620 84 ---------- 1 root root 81880 Jan 3 2012 /usr/sbin/edquota 14877113 48 ---------- 1 root root 46880 Sep 13 00:29 /usr/sbin/grpck 1727722 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/pwck 1727730 96 ---------- 1 root root 91464 Sep 13 00:29 /usr/sbin/useradd 19031619 16 ---------- 1 root root 14600 Jan 3 2012 /usr/sbin/quotastats 1727720 44 ---------- 1 root root 42760 Sep 13 00:29 /usr/sbin/groupdel 1727733 36 ---------- 1 root root 34504 Sep 13 00:29 /usr/sbin/pwconv 19031621 80 ---------- 1 root root 77632 Jan 3 2012 /usr/sbin/rpc.rquotad 19030041 76 ---------- 1 root root 73600 Jan 3 2012 /usr/sbin/repquota 1727731 40 ---------- 1 root root 38624 Sep 13 00:29 /usr/sbin/grpconv 1727725 56 ---------- 1 root root 49472 Sep 13 00:29 /usr/sbin/vipw 1727723 64 ---------- 1 root root 57672 Sep 13 00:29 /usr/sbin/groupmod root@besen:~# find /sbin/ -perm 0 -ls 16760927 76 ---------- 1 root root 73464 Jan 3 2012 /sbin/quotaon Any tipps? I really can't pinpoint the problem in more detail. It happens after installing updates but I can't find no hooks in the dpkg/apt system.

    Read the article

  • Postfix not sending/allowing receiving of messages after server (hardware) changed

    - by 537mfb
    We had na old notebook runing Ubuntu 12.04 working as a web/ftp/mail server and it worked but since the notebook was a notebook and pretty old and unreliable, a desktop was bought to replace it before it stopped working all together. Due to issues with the new desktop's vídeo card, we couldn't use Ubuntu 12.04 so we installed Ubuntu 13.10 and wen't about configuring it. Since we removed the notebook from the network, we kept the same Computer Name and local IP address to make things as close to the old server as possible configuration-wise. However, something has gone wrong since Postfix is throwing error 451 4.3.0 lookup faillure on every attempt to send a mail, and no email can be received either. Our main.cf file is a copy of the one we were using (and working) on the old server (notice we use EHCP) # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name powered by Easy Hosting Control Panel (ehcp) on Ubuntu, www.ehcp.net biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no myhostname = m21-traducoes.com.pt relayhost = mydestination = localhost, 89.152.248.139 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 89.152.248.0/24 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtp_use_tls = yes smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes debug_peer_list = sender_canonical_maps = debug_peer_level = 1 proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $mynetworks $virtual_mailbox_limit_maps $transport_maps alias_maps = hash:/etc/aliases smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtpd_destination_concurrency_limit = 2 smtpd_destination_rate_delay = 1s smtpd_extra_recipient_limit = 10 disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 This configuration was working before but now everytime i try to send a mail in squirrelmail it reports: Message not sent. Server replied: Requested action aborted: error in processing 451 4.3.0 <[email protected]>: Temporary lookup failure And i can't send mail to it from outsider either. Any ideas? EDIT: Here are some issues MXToolBox reports to my domain, answering hopefully to @Teun Vink: BlackList Mail Server Web Server DNS Error 4 0 2 0 Warnings 0 0 0 3 Passed 0 6 3 12 So the domain is on some blacklist, but that doesn't explain the error at all No mail server issues found (except it's not working) Those two web server errors it's because i don't have HTTPS workin (No SSL Certificate) so the test fails Those 3 DNS warnings we're already there when it was working with the other machine and are related to stuff i can't control: SOA Refresh Value is outside of the recommended range SOA Expire Value out of recommended range SOA NXDOMAIN Value too high I've searched and as far as i can tell only the guys who sold the retail can change those values and they won't. Edit2: I half solved the issue.on the new machine postfix was installed but postfix-mysql waasn't so he couldn't connect to the database (rookie mistake). After fixing that, i can now send mails to the outsider without any issues, however i am still not able to receive mails from utside. The sender doesn't get any message warning about the non-delivery but the message doesn't fall in the inbox and the log shows: Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: NOQUEUE: reject: RCPT from re lay4.ptmail.sapo.pt[212.55.154.24]: 451 4.3.5 <relay4.ptmail.sapo.pt[212.55.154. 24]>: Client host rejected: Server configuration error; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<sapo.pt> Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: disconnect from relay4.ptmail .sapo.pt[212.55.154.24]

    Read the article

  • Tomcat and ASP site under IIS6 with SSL

    - by Rafe
    I've been working on migrating our companies' website from it's original server to a new one and am having two different but possibly related problems. The box this is sitting on is a Windows 2003 server x64 running IIS 6. The Tomcat version is 5.5.x as it was the version the original deployment was built on. There are two other sites on the server one in plain HTML, another in PHP and the one I am trying to migrate is a combination of Java and ASP (the introductory/sign in pages being Java as well as many reports used for our clients and the administration pages being in ASP) First of all I can only access the site if I enter the ip followed by :8080 (xxx.xxx.xxx.xxx:8080). The original setup had an index.html file in the root of the site with a bit of javascript in the header that pointed the site to 'www.mysite.com/app/public' but if I try going directly to the site without the 8080 I get a 'page not found error' and the javascript redirector causes the same problem because it doesn't add the 8080 into the URL even though on the original site the 8080 wasn't present so I don't understand why it would need it now. The js redirect looks like this: <script language="JavaScript"> <!-- location.href = "/app/public/" location.replace("/app/public/"); //--> </script> When setting the site up I used the command line to unbind IIS from all of the ip's on the system (there are 12 ip's on this box) because I was led to believe Tomcat wanted to use localhost which wasn't accessible. I'm not sure if this was the right thing to do but I'm throwing it in for the sake of completeness. And actually, at this point trying to go to localhost from the server itself throws up a 'could not connect to localhost' error. If I go to localhost:8080 I get the tomcat welcome page. If I do localhost:8080/app/public I get the intro page to our website. So I'm not sure what I'm even looking at in this case, that is what the proper behavior should be. The second part of the problem is that if I do go to either the ip or localhost such as above (localhost:8080/app/public) and click on our login link it is supposed to transfer me to our login page yet instead I receive a 'could not connect' error and the url has changed to localhost:8443/app/secure. From my research I see that port 8443 is Tomcats SSL port and the server.xml alludes to it as follows: <Connector port="8080" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> I have an SSL certificate assigned to the site via IIS and was under the impression that by default Tomcat allowed IIS to handle secure connections but apparently something is munged because it's not working. There is another section in the server.xml that reads like this: <Connector port="8009" enableLookups="false" redirectPort="443" protocol="AJP/1.3" /> Which I'm not sure what it is for although port 443 is the SSL port that IIS uses so I'm confused as to what this is supposed to be doing. Another question I have is when does the isap_redirector actually come into play? How does it know when to try and serve pages through Tomcat and when not to? I've hunted around the 'net for an answer and have yet to find a clear dialogue on the subject. Anyone have any pointers as to where to look for a solution to all of this?

    Read the article

  • Vim: Context sensitive code completion for PHP

    - by eddy147
    Vim gives me too much options when I use code completion. In a class, and type $class- it gives me about a zillion options, so not only from the class itself but also from php, all globals ever created, in short: a mess. I only want to have the options from the class itself (or the parent subtype class it extends from), so context or scope sensitive code completion, just like Netbeans for example. How can I do that? My current configuration is this: I am using ctags, and created 1 ctags file for our (big) application in the root. This is the .ctags file I used to create the ctags file: -R -h ".php" --exclude=.svn --languages=+PHP,-JavaScript --tag-relative=yes --regex-PHP=/abstract\s+class\s+([^ ]+)/\1/c/ --regex-PHP=/interface\s+([^ ]+)/\1/c/ --regex-PHP=/(public\s+|static\s+|protected\s+|private\s+)\$([^ \t=]+)/\2/p/ --regex-PHP=/const\s+([^ \t=]+)/\1/d/ --regex-PHP=/final\s+(public\s+|static\s+|abstract\s+|protected\s+|private\s+)function\s+\&?\s*([^ (]+)/\2/f/ --PHP-kinds=+cdf --fields=+iaS This is the .vimrc file: " autocomplete funcs and identifiers for languages autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType python set omnifunc=pythoncomplete#Complete autocmd FileType javascript set omnifunc=javascriptcomplete#CompleteJS autocmd FileType html set omnifunc=htmlcomplete#CompleteTags autocmd FileType css set omnifunc=csscomplete#CompleteCSS autocmd FileType xml set omnifunc=xmlcomplete#CompleteTags autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType c set omnifunc=ccomplete#Complete " exuberant ctags " the magic is the ';' at end. it will make vim tags file search go up from current directory until it finds one. set tags=projectrootdir/tags; map <F8> :!ctags " TagList " :tag getUser => Jump to getUser method " :tn (or tnext) => go to next search result " :tp (or tprev) => to to previous search result " :ts (or tselect) => List the current tags " => Go back to last tag location " +Left click => Go to definition of a method " More info: " http://vimdoc.sourceforge.net/htmldoc/tagsrch.html (official documentation) " http://www.vim.org/tips/tip.php?tip_id=94 (a vim tip) let Tlist_Ctags_Cmd = "~/bin/ctags" let Tlist_WinWidth = 50 map <F4> :TlistToggle<cr> "see http://vim.wikia.com/wiki/Make_Vim_completion_popup_menu_work_just_like_in_an_IDE " will change the 'completeopt' option so that Vim's popup menu doesn't select the first completion item, but rather just inserts the longest common text of all matches :set completeopt=longest,menuone " will change the behavior of the <Enter> key when the popup menu is visible. In that case the Enter key will simply select the highlighted menu item, just as <C-Y> does :inoremap <expr> <CR> pumvisible() ? "\<C-y>" : "\<C-g>u\<CR>" " inoremap <expr> <C-n> pumvisible() ? '<C-n>' : \ '<C-n><C-r>=pumvisible() ? "\<lt>Down>" : ""<CR>' inoremap <expr> <M-,> pumvisible() ? '<C-n>' : \ '<C-x><C-o><C-n><C-p><C-r>=pumvisible() ? "\<lt>Down>" : ""<CR>'

    Read the article

  • Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

    - by froh42
    I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

    Read the article

  • Issues Converting Plain Text Into Microsoft Word Bulleted Lists

    - by user787832
    I'm a programmer. I hate status reports. I found a way to live with it. While I am working in my IDE ( Visual Slickedit ) I keep a plain text file open in one of the file/buffer tabs. As I finish things I just jot down a quick note into that file. At the end of the week that becomes my weekly status report. Example entries: The Datatables.net plugin runs very slowly in IE 8 with more than 2,000 records. I changed the way I did the server side code to process the data to make less work for the plugin to get decent performance for the IE 8 users. I made a class to wrap data from the new data collection objects into the legacy data holder objects. This will let the new database code be backward compatible with the legacy code until we can replace it. I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site At the end of the month I go back to each weekly *.txt file and paste all of the entries into a MS Word file for a monthly report. I give the monthly report to a liason to the contracting company who has to compile everyone's monthly reports into a single MS Word 2007 document. His problem, soon to be my problem, comes when he highlights my paragraphs like the ones above to put bullets in front of my paragraphs. When he highlights my notes to put bullets in front of them with MS Word 2007, Word rearranges the text a bit and the new line chars/carriage returns stagger the text so the text is no longer in neat chunks. This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site Becomes This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site I tried turning word wrap on in my IDE for the text files I put my status notes in. It just puts some kind of newline character in anyway. Searching/Replacing those chars in the text files has the result of destroying the paragraphs. Once my notes are pasted into MS Word, Word automatically translates them into paragraph breaks. Searching/Replacing them there has similar results. Blank lines separating the notes disappears. One big mess. What I would like is to be able to keep adding my status notes to a text file as I am now, but do something different when I paste the notes into MS Word such that my liason can select the text, hit the bulleting command and NOT have the staggered text as shown above. Any ideas? Thanks much in advance Steve

    Read the article

  • How can I make subversion reset the stored passwords/users and remember my authentication credential

    - by NicDumZ
    Hello folks! Background: I used to have everything working just fine on my fresh install: $ svn co https://domain:443/ test1 Error validating server certificate for 'https://domain:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! Certificate information: - Hostname: **REMOVED** - Valid: **REMOVED** - Issuer: **REMOVED** - Fingerprint: **checked with issuer and REMOVED** (R)eject, accept (t)emporarily or accept (p)ermanently? p Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz-machine-hostname': Authentication realm: <https://domain:443> Subversion repository Username: nicdumz Password for 'nicdumz': # proceeds to checkout correctly $ svn co https://domain:443/ test2 # checkouts nicely, without asking for my password. At some point I needed to commit stuff using a different account. So I did that $ svn ci --username other.user Authentication realm: <https://domain:443> Subversion repository Password for 'other.user': # works fine But since then, everytime I want to commit as 'nicdumz' (default user, all repos have been checked-out with that user), it prompts me for my password: $ svn ci Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz': Hey come on, why :) The same happens if I want a fresh checkout, since read-access is also protected. So I tried fixing the issue by myself. I read around that ~/.subversion/auth was storing credentials, so I removed it from the way: $ cd ~/.subversion $ mv auth oldauth $ mkdir auth It seemed to work at first, because svn had forgotten about certificate validation: $ svn co https://domain:443/ test3 Error validating server certificate for 'https://domain:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! Certificate information: - Hostname: **REMOVED** - Valid: **REMOVED** - Issuer: **REMOVED** - Fingerprint: **checked with issuer and REMOVED** (R)eject, accept (t)emporarily or accept (p)ermanently? p Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz-machine-hostname': Authentication realm: <https://domain:443> Subversion repository Username: nicdumz Password for 'nicdumz': # proceeds to checkout correctly $ svn up Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz': What? how is this happening? If you have suggestions to investigate more about the behaviour, I am very interested. If I'm correct, there is no way to do a verbose svn up or anything of the like, so I'm not sure should I go for investigation. Oh, and for what it's worth: $ svn --version svn, version 1.6.6 (r40053) compiled Oct 26 2009, 06:19:08 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: * ra_neon : Module for accessing a repository via WebDAV protocol using Neon. - handles 'http' scheme - handles 'https' scheme * ra_svn : Module for accessing a repository using the svn network protocol. - with Cyrus SASL authentication - handles 'svn' scheme * ra_local : Module for accessing a repository on local disk. - handles 'file' scheme * ra_serf : Module for accessing a repository via WebDAV protocol using serf. - handles 'http' scheme - handles 'https' scheme

    Read the article

  • "Service Unavailable" when browsing to static HTML page in non-application IIS website on Windows 2003 (possibly SharePoint WSS 2.0 related?)

    - by Jordan Rieger
    Background: My client has an old Pentium III Windows 2003 server whose 16/36 GB disks are dying. On it he has a database-driven web site and email application that needs further customization by a developer (me). First we need to get it working on the new server. The original developer is no longer available to provide a system setup guide. So my client got a tech who imaged the old drives over to the new server and managed to get it booting. But the IIS-driven site no longer works. In fact it seems that IIS itself does not work. Problem: Service Unavailable when attempting to browse from the server itself to the URL for a local Web Site called test which I setup in IIS to serve a single static index.htm file. This I did to isolate the problem, and eliminate the client's application from the equation. The site is setup on port 80 with the host header "test.myclientsdomain.com", and I used the etc\hosts file to point that host at the local IP. I know the host entry took effect because I can ping it. When doing an iisreset, I get: Attempting start... Restart attempt failed. IIS Admin Service or a service dependent on IIS Admin is not active. It most likely failed to start, which may mean that it's disabled. Despite this message, the services all stay in the Started state. The only relevant System event logs I found are: Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1002 Date: 11/4/2012 Time: 11:04:47 PM User: N/A Computer: ALPHA1 Description: Application pool 'DefaultAppPool' is being automatically disabled due to a series of failures in the process(es) serving that application pool. Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1039 Date: 11/4/2012 Time: 11:13:12 PM User: N/A Computer: ALPHA1 Description: A process serving application pool 'DefaultAppPool' reported a failure. The process id was '5636'. The data field contains the error number. Data: 0000: 7e 00 07 80 ~.. And one Application event log: Event Type: Error Event Source: Windows SharePoint Services 2.0 Event Category: None Event ID: 1000 Date: 11/4/2012 Time: 11:34:04 PM User: N/A Computer: ALPHA1 Description: #50070: Unable to connect to the database STS_Config on ALPHA2\SharePoint. Check the database connection information and make sure that the database server is running. That last log tells me that the tech may have initially tried to have both the old and the new server running, by renaming the new server from ALPHA1 to ALPHA2. And perhaps SharePoint grabbed onto that change, and now can't tell that the machine name has been switched back to the old ALPHA1. But why would SharePoint interfere with a static IIS web site serving a single HTML file? The test site is not even within an Application pool (I clicked the Remove button.) What I have tried/eliminated: No relevant services seem to be disabled: IIS Admin, WWW Publishing, Sharepoint Timer Giving Full Control to All Users/Everyone on the c:\inetpub\test folder serving my test site. I can connect to and query the local SharePoint config database (ALPHA1\SHAREPOINT\STS_CONFIG) from SSMS. But when I try to do stsadm -o setconfigdb -connect -databaseserver ALPHA1\SHAREPOINT it tells me The SharePoint admininstration port does not exist. Please use stsadm.exe to create it. And when I do that, using the port 9487 specified in the IIS SharePoint Admin site config, it tells me the port is already in use. Needless to say, simply browsing to the admin site gives me a similar error about being unable to reach the config database. I didn't want to go further down the SharePoint path as it may be completed unrelated to my IIS issue, and I don't even know yet if SharePoint is required for this application to work. The app itself is ASP.Net/C#/Silverlight and a little MS Word integration (maybe that's where the SharePoint stuff comes in.)

    Read the article

  • MySQL reserves too much RAM

    - by Buddy
    I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

    Read the article

  • Apache SSL reverse proxy to a Embed Tomcat

    - by ggarcia24
    I'm trying to put in place a reverse proxy for an application that is running a tomcat embed server over SSL. The application needs to run over SSL on the port 9002 so I have no way of "disabling SSL" for this app. The current setup schema looks like this: [192.168.0.10:443 - Apache with mod_proxy] --> [192.168.0.10:9002 - Tomcat App] After googling on how to make such a setup (and testing) I came across this: https://bugs.launchpad.net/ubuntu/+source/openssl/+bug/861137 Which lead to make my current configuration (to try to emulate the --secure-protocol=sslv3 option of wget) /etc/apache2/sites/enabled/default-ssl: <VirtualHost _default_:443> SSLEngine On SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key SSLProxyEngine On SSLProxyProtocol SSLv3 SSLProxyCipherSuite SSLv3 ProxyPass /test/ https://192.168.0.10:9002/ ProxyPassReverse /test/ https://192.168.0.10:9002/ LogLevel debug ErrorLog /var/log/apache2/error-ssl.log CustomLog /var/log/apache2/access-ssl.log combined </VirtualHost> The thing is that the error log is showing error:14077102:SSL routines:SSL23_GET_SERVER_HELLO:unsupported protocol Complete request log: [Wed Mar 13 20:05:57 2013] [debug] mod_proxy.c(1020): Running scheme https handler (attempt 0) [Wed Mar 13 20:05:57 2013] [debug] mod_proxy_http.c(1973): proxy: HTTP: serving URL https://192.168.0.10:9002/ [Wed Mar 13 20:05:57 2013] [debug] proxy_util.c(2011): proxy: HTTPS: has acquired connection for (192.168.0.10) [Wed Mar 13 20:05:57 2013] [debug] proxy_util.c(2067): proxy: connecting https://192.168.0.10:9002/ to 192.168.0.10:9002 [Wed Mar 13 20:05:57 2013] [debug] proxy_util.c(2193): proxy: connected / to 192.168.0.10:9002 [Wed Mar 13 20:05:57 2013] [debug] proxy_util.c(2444): proxy: HTTPS: fam 2 socket created to connect to 192.168.0.10 [Wed Mar 13 20:05:57 2013] [debug] proxy_util.c(2576): proxy: HTTPS: connection complete to 192.168.0.10:9002 (192.168.0.10) [Wed Mar 13 20:05:57 2013] [info] [client 192.168.0.10] Connection to child 0 established (server demo1agrubu01.demo.lab:443) [Wed Mar 13 20:05:57 2013] [info] Seeding PRNG with 656 bytes of entropy [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_kernel.c(1866): OpenSSL: Handshake: start [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: before/connect initialization [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: unknown state [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_io.c(1897): OpenSSL: read 7/7 bytes from BIO#7f122800a100 [mem: 7f1230018f60] (BIO dump follows) [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_io.c(1830): +-------------------------------------------------------------------------+ [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_io.c(1869): | 0000: 15 03 01 00 02 02 50 ......P | [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_io.c(1875): +-------------------------------------------------------------------------+ [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_kernel.c(1903): OpenSSL: Exit: error in unknown state [Wed Mar 13 20:05:57 2013] [info] [client 192.168.0.10] SSL Proxy connect failed [Wed Mar 13 20:05:57 2013] [info] SSL Library Error: 336032002 error:14077102:SSL routines:SSL23_GET_SERVER_HELLO:unsupported protocol [Wed Mar 13 20:05:57 2013] [info] [client 192.168.0.10] Connection closed to child 0 with abortive shutdown (server example1.domain.tld:443) [Wed Mar 13 20:05:57 2013] [error] (502)Unknown error 502: proxy: pass request body failed to 172.31.4.13:9002 (192.168.0.10) [Wed Mar 13 20:05:57 2013] [error] [client 192.168.0.10] proxy: Error during SSL Handshake with remote server returned by /dsfe/ [Wed Mar 13 20:05:57 2013] [error] proxy: pass request body failed to 192.168.0.10:9002 (172.31.4.13) from 172.31.4.13 () [Wed Mar 13 20:05:57 2013] [debug] proxy_util.c(2029): proxy: HTTPS: has released connection for (172.31.4.13) [Wed Mar 13 20:05:57 2013] [debug] ssl_engine_kernel.c(1884): OpenSSL: Write: SSL negotiation finished successfully [Wed Mar 13 20:05:57 2013] [info] [client 192.168.0.10] Connection closed to child 6 with standard shutdown (server example1.domain.tld:443) If I do a wget --secure-protocol=sslv3 --no-check-certificate https://192.168.0.10:9002/ it works perfectly, but from apache is not working. I'm on an Ubuntu Server with the latest updates running apache2 with mod_proxy and mod_ssl enabled: ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" ~# dpkg -s apache2 ... Version: 2.2.22-1ubuntu1.2 ... ~# dpkg -s openssl ... Version: 1.0.1-4ubuntu5.7 ... Hope that anyone may help

    Read the article

  • VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

    - by CAPitalZ
    I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

    Read the article

  • Installing EclipseFP on Mac OS X

    - by Dom Kennedy
    I am trying to install EclipseFP. I'm running OS X Mavericks. I've tried following both the official installation instructions and the advice in this answer on SU, but I'm still having the same problem. I can get the plugin itself installed painlessly using Help -> Install New Software..., Bbut when I restart and switch to the Haskell perspective, things start to go wrong. The installation instructions tells me that I should receive a prompt to install BuildWrapper and Scion Browser. I do not receive this prompt. Furthermore, if I create a new Haskell project, my code has no syntax highlighting, and the Hoogle search feature does not appear to do anything. It's clear that the plugin is not set up correctly yet. I've tried running cabal update in Terminal, but this does not change anything. After several attempts going round in circles with this on Eclipse Juno, I uninstalled Eclispe and the Haskell Platform and performed a clean install of Eclipse Luna and the latest Haskell Platform. However, the problems are persisting. I've tried going into Preferences to see if I could sort any of this out manually. I should initially point out that my GHC installation seems to be correctly references under Preferences -> Haskell Implementations Under Haskell -> Helper executables, there are areas for configuring the options of both BuildWrapper and Scion Browser. At present, both are blank. I tried clicking the Install from Hackage... button beside each of them with no success; I receive an error message saying Expected executable <workspace>/.metadata/.plugins/net.sf.eclipsefp.haskell.ui/sandbox/.cabal-sandbox/bin/buildwrapper not found!` (replace buildwrapper for scion-browser and the message is the same) The Eclipse console displays the following exception after doing the above with BuildWrapper: src/Language/Haskell/BuildWrapper/GHCStorage.hs:313:32: Not in scope: data constructor ‘MatchGroup’ cabal.real: Error: some packages failed to install: buildwrapper-0.7.4 failed during the building phase. The exception was: ExitFailure 1 and after doing it for Scion-Browser: zip-archive-0.2.3.4 (reinstall) changes: text-1.1.0.0 -> 0.11.3.1 pandoc-1.12.3.3 (latest: 1.13) -http-conduit (new version) Graphalyze-0.14.1.0 (reinstall) changes: pandoc-1.12.4.2 -> 1.12.3.3, text-1.1.0.0 -> 0.11.3.1 cabal.real: The following packages are likely to be broken by the reinstalls: pandoc-1.12.4.2 unordered-containers-0.2.4.0 aeson-0.7.0.4 scientific-0.2.0.2 case-insensitive-1.1.0.3 HTTP-4000.2.10 Use --force-reinstalls if you want to install anyway. After receiving similar results as the above on previous attempts, I've tried using force-reinstalls and ended up at more dead ends. I am at a loss as to what is wrong and how to solve this. I should point out that my GHC installation appears to be correctly configured under Preferences -> Haskell -> Haskell Implementations. Apologies if any of this information is irrelevant, I'm just not really sure what is important and what isn't at this point. Any help anyone could provide me with would be greatly appreciated.

    Read the article

  • configuring uppercut for automated build

    - by deepasun
    This is my cc.net's config file. http://confluence.public.thoughtworks.org/display/CCNET/Configuration+Preprocessor -- -- -- <!-- PROJECT STRUCTURE --> <cb:define name="WindowsFormsApplication1"> <project name="$(projectName)"> <workingDirectory>$(working_directory)\$(projectName)</workingDirectory> <artifactDirectory>$(drop_directory)\$(projectName)</artifactDirectory> <category>$(projectName)</category> <queuePriority>$(queuePriority)</queuePriority> <triggers> <intervalTrigger name="continuous" seconds="60" buildCondition="IfModificationExists" /> </triggers> <sourcecontrol type="svn"> <executable>c:\program files\subversion\bin\svn.exe</executable> <!--<trunkUrl>http://192.168.1.8/trainingrepos/deepasundari/WindowsFormsApplication1</trunkUrl>--> <trunkUrl>$(svnPath)</trunkUrl> <workingDirectory>$(working_directory)\$(projectName)</workingDirectory> </sourcecontrol> <tasks> <exec> <executable>$(working_directory)\$(projectName)\build.bat</executable> </exec> </tasks> <publishers> <merge> <files> <file>$(working_directory)\$(projectName)\build_output\build_artifacts\*.xml</file> <file>$(working_directory)\$(projectName)\build_output\build_artifacts\mbunit\*-results.xml</file> <file>$(working_directory)\$(projectName)\build_output\build_artifacts\nunit\*-results.xml</file> <file>$(working_directory)\$(projectName)\build_output\build_artifacts\ncover\*-results.xml</file> <file>$(working_directory)\$(projectName)\build_output\build_artifacts\ndepend\*.xml</file> </files> </merge> <!--<email from="[email protected]" mailhost="smtp.somewhere.com" includeDetails="TRUE"> <users> <user name="YOUR NAME" group="BuildNotice" address="[email protected]" /> </users> <groups> <group name="BuildNotice" notification="change" /> </groups> </email>--> <xmllogger/> <statistics> <statisticList> <firstMatch name="Svn Revision" xpath="//modifications/modification/changeNumber" /> <firstMatch name="ILInstructions" xpath="//ApplicationMetrics/@NILInstruction" /> <firstMatch name="LinesOfCode" xpath="//ApplicationMetrics/@NbLinesOfCode" /> <firstMatch name="LinesOfComment" xpath="//ApplicationMetrics/@NbLinesOfComment" /> </statisticList> </statistics> <modificationHistory onlyLogWhenChangesFound="true" /> <rss/> </publishers> </project> </cb:define> <cb:WindowsFormsApplication1 projectname="WindowsFormsApplication1" queuepriority="80" svnpath="http://192.168.1.8/trainingrepos/deepasundari/WindowsFormsApplication1" /> It is not producing the build directory in code_drop, but updating reports.xml with updated build.. wht is the problem?

    Read the article

  • KVM with one host IP and a different subnet for machines

    - by Jguy
    I've already setup a KVM host with proper IP configurations, but my host had me create DHCP and use that to assign the IP's to the machines. I want to see if there's an easier way to do it (or better). Upon my first setting out on this, I didn't find anything that pointed me in the right direction. I'm coming off a fresh install of Debian 6.0 x64, so I have nothing installed. I've logged in, queried for the below information and changed the password from my host set one. I have a Debian 6.0 x64 system with the following initial network configuration (substituted 255 in place of my real first octave): # tail /etc/network/interfaces auto eth0 iface eth0 inet static address 255.9.24.80 broadcast 255.9.24.95 netmask 255.255.255.224 gateway 255.9.24.65 # default route to access subnet up route add -net 255.9.24.64 netmask 255.255.255.224 gw 255.9.24.65 eth0 I have a /29 subnet that I want the virtual machines to use from my host: IP: 255.46.187.152 /29 Mask: 255.255.255.248 Broadcast: 255.46.187.159 Usable IP addresses: 255.46.187.153 to 255.46.187.158 I like the interface of Cloudmin, so I want to try and use that if I can to administrate my guests. So, my questions: How do I set this up on the host system the best so that I can use the additional Subnet IP's on the guests and have them accessible from the internet? I also need to host a DNS server, which means one of these VM's has to have two IP's assigned to it and accessable from the outside world. How can I do that using Cloudmin? I had a question about this here: Multiple IP addresses assigned to one KVM VM But I just reformatted the entire server and am trying to figure out a better way of doing this. Machine information: # ip route show 255.9.24.64/27 via 255.9.24.65 dev eth0 255.9.24.64/27 dev eth0 proto kernel scope link src 255.9.24.80 default via 255.9.24.65 dev eth0 brctl is empty # ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether c8:60:00:54:b5:d8 brd ff:ff:ff:ff:ff:ff inet 255.9.24.80/27 brd 255.9.24.95 scope global eth0 inet6 fe80::ca60:ff:fe54:b5d8/64 scope link valid_lft forever preferred_lft forever Thank you for any help you can provide me. EDIT: I've installed kvm and cloudmin: aptitude install qemu-kvm libvirt-bin wget http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-kvm-debian-install.sh ./cloudmin-kvm-debian-install.sh Rebooted and now my network configuration looks like this: # device: eth0 iface eth0 inet manual # default route to access subnet iface br0 inet static address 255.9.24.80 netmask 255.255.255.224 broadcast 255.9.24.95 network 255.9.24.64 bridge_ports eth0 gateway 255.9.24.65 I setup in Cloudmin the Start IP as 255.46.187.153 and End IP as 255.46.187.158. The CIDR is 29 and the gateway is 255.46.187.152. I've installed a guest with ubuntuserver 12.04 x64, which was able to get and retrieve internet resources during installation, but now cannot reach anything nor can it be reached from anything. Its network configuration is: iface eth0 inet static address 255.46.187.153 netmask 255.255.255.224 broadcast 255.46.187.159 gateway 255.46.187.152 dns-nameservers <host provided nameservers> And is not able to ping google.com through DNS or direct IP, I can't ping the VM from the outside or the host. any ideas now?

    Read the article

  • need assistance with my.cnf - 1500% CPU usage

    - by Alan Long
    I'm running into a few issues with our new database server. It is a HP G8 with 2 INTEL XEON E5-2650 processors and 32GB of ram. This server is dedicated as a MySQL server (5.1.69) for our intranet portal. I have been having issues with this server staying alive - I notice high CPU usage during certain times of day (8% ~ 1500%+) and see very low memory usage (7 ~ 15%) based on using the 'top' command. When the CPU usage passes 1000%, that is when the app usually dies. I'm trying to see what I'm doing wrong with the config file, hopefully one of the experts can chime in and let me know what they think. See below for my.cnf file: [mysqld] default-storage-engine=InnoDB datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock #user=mysql large-pages # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_connections=275 tmp_table_size=1G key_buffer_size=384M key_buffer=384M thread_cache_size=1024 long_query_time=5 low_priority_updates=1 max_heap_table_size=1G myisam_sort_buffer_size=8M concurrent_insert=2 table_cache=1024 sort_buffer_size=8M read_buffer_size=5M read_rnd_buffer_size=6M join_buffer_size=16M table_definition_cache=6k open_files_limit=8k slow_query_log #skip-name-resolve # Innodb Settings innodb_buffer_pool_size=18G innodb_thread_concurrency=0 innodb_log_file_size=1G innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_lock_wait_timeout=50 innodb_file_per_table #innodb_buffer_pool_instances=4 #eliminating double buffering innodb_flush_method = O_DIRECT flush_time=86400 innodb_additional_mem_pool_size=40M #innodb_io_capacity = 5000 #innodb_read_io_threads = 64 #innodb_write_io_threads = 64 # increase until threads_created doesnt grow anymore thread_cache=1024 query_cache_type=1 query_cache_limit=4M query_cache_size=256M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 0 wait_timeout = 1800 connect_timeout = 10 interactive_timeout = 60 [mysqldump] max_allowed_packet=32M [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid log-slow-queries=/var/log/mysql/slow-queries.log long_query_time = 1 log-queries-not-using-indexes we connect to one database with 75 tables, the largest table has 1,150,000 entries and the second largest has 128,036 entries. I have also verified that our PHP queries are optimized as best as possible. Reference - MySQLtuner: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.69-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 420M (Tables: 75) [!!] Total fragmented tables: 75 -------- Security Recommendations ------------------------------------------- [!!] User '[email protected]' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 1h 14m 50s (8M q [1K qps], 705 conn, TX: 6B, RX: 892M) [--] Reads / Writes: 68% / 32% [--] Total buffers: 19.7G global + 35.2M per thread (275 max threads) [!!] Maximum possible memory usage: 29.1G (93% of installed RAM) [OK] Slow queries: 0% (472/8M) [OK] Highest usage of available connections: 66% (183/275) [OK] Key buffer size / total MyISAM indexes: 384.0M/91.0K [OK] Key buffer hit rate: 100.0% (173 cached / 0 reads) [OK] Query cache efficiency: 96.2% (7M cached / 7M selects) [!!] Query cache prunes per day: 553614 [OK] Sorts requiring temporary tables: 0% (3 temp sorts / 1K sorts) [!!] Temporary tables created on disk: 49% (3K on disk / 7K total) [OK] Thread cache hit rate: 74% (183 created / 705 connections) [OK] Table cache hit rate: 97% (231 open / 238 opened) [OK] Open file limit used: 0% (17/8K) [OK] Table locks acquired immediately: 100% (432K immediate / 432K locks) [OK] InnoDB data size / buffer pool: 420.9M/18.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 256M) [see warning above] Thanks in advanced for your help!

    Read the article

  • Backup, Migrate or Clone Failing CentOS 4 (LVM)

    - by Hegelworm
    I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks. Update: Thanks for your responses so far - it's much appreciated and makes me feel a little more confident when I can double-check things here. I had the idea of doing a fresh install of CentOS (from the original disk) on the new drive so the partitions and LVM were all set up correctly (after disconnecting my source drive to prevent painful mistakes). I then booted into rescue mode from the same CD, and, to avoid a conflicting label, changed the /boot partition's label using e2label to /bootnew. I then changed the VolGroup name using lvm vgrename from VolGroup00 to VolGroup001. I could then boot with both drives in. After mounting the new drive (via its VolGroup001 alias) into /newhd, I rsync-ed over everything I could to the new drive, using -avr switches and backslashes. Like mentioned here. I then disconnected my original source drive again, booted from the liveCD again, changed back the boot partition label from /bootnew to /boot using e2label and then renamed the VolGroup back to VolGroup00. I then rebooted and it went through the familiar start-up routine only to not find a host of files in proc, usr, lib, var etc. The boot did complete but there were lots of red 'FAILS'. I could log in with my existing creds, but the network was kaput, I couldn't startX (desktop GUI) and there were also a few (a lot) of error messages pertaining to iptables. Back to square one. I naively thought I'd nailed it. Shall I just buy a bigger hard drive and attempt the dd route? I've read that this can mess with LVM setups and there's the added risk of working on two unmounted drives at once with a low-level tool. Thanks again.

    Read the article

  • mySQL Optimization Suggestions

    - by Brian Schroeter
    I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

    Read the article

  • Can't configure frame relay T1 on Cisco 1760

    - by sonar
    For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

    Read the article

  • From Binary to Data Structures

    - by Cédric Menzi
    Table of Contents Introduction PE file format and COFF header COFF file header BaseCoffReader Byte4ByteCoffReader UnsafeCoffReader ManagedCoffReader Conclusion History This article is also available on CodeProject Introduction Sometimes, you want to parse well-formed binary data and bring it into your objects to do some dirty stuff with it. In the Windows world most data structures are stored in special binary format. Either we call a WinApi function or we want to read from special files like images, spool files, executables or may be the previously announced Outlook Personal Folders File. Most specifications for these files can be found on the MSDN Libarary: Open Specification In my example, we are going to get the COFF (Common Object File Format) file header from a PE (Portable Executable). The exact specification can be found here: PECOFF PE file format and COFF header Before we start we need to know how this file is formatted. The following figure shows an overview of the Microsoft PE executable format. Source: Microsoft Our goal is to get the PE header. As we can see, the image starts with a MS-DOS 2.0 header with is not important for us. From the documentation we can read "...After the MS DOS stub, at the file offset specified at offset 0x3c, is a 4-byte...". With this information we know our reader has to jump to location 0x3c and read the offset to the signature. The signature is always 4 bytes that ensures that the image is a PE file. The signature is: PE\0\0. To prove this we first seek to the offset 0x3c, read if the file consist the signature. So we need to declare some constants, because we do not want magic numbers.   private const int PeSignatureOffsetLocation = 0x3c; private const int PeSignatureSize = 4; private const string PeSignatureContent = "PE";   Then a method for moving the reader to the correct location to read the offset of signature. With this method we always move the underlining Stream of the BinaryReader to the start location of the PE signature.   private void SeekToPeSignature(BinaryReader br) { // seek to the offset for the PE signagure br.BaseStream.Seek(PeSignatureOffsetLocation, SeekOrigin.Begin); // read the offset int offsetToPeSig = br.ReadInt32(); // seek to the start of the PE signature br.BaseStream.Seek(offsetToPeSig, SeekOrigin.Begin); }   Now, we can check if it is a valid PE image by reading of the next 4 byte contains the content PE.   private bool IsValidPeSignature(BinaryReader br) { // read 4 bytes to get the PE signature byte[] peSigBytes = br.ReadBytes(PeSignatureSize); // convert it to a string and trim \0 at the end of the content string peContent = Encoding.Default.GetString(peSigBytes).TrimEnd('\0'); // check if PE is in the content return peContent.Equals(PeSignatureContent); }   With this basic functionality we have a good base reader class to try the different methods of parsing the COFF file header. COFF file header The COFF header has the following structure: Offset Size Field 0 2 Machine 2 2 NumberOfSections 4 4 TimeDateStamp 8 4 PointerToSymbolTable 12 4 NumberOfSymbols 16 2 SizeOfOptionalHeader 18 2 Characteristics If we translate this table to code, we get something like this:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public MachineType Machine; public ushort NumberOfSections; public uint TimeDateStamp; public uint PointerToSymbolTable; public uint NumberOfSymbols; public ushort SizeOfOptionalHeader; public Characteristic Characteristics; } BaseCoffReader All readers do the same thing, so we go to the patterns library in our head and see that Strategy pattern or Template method pattern is sticked out in the bookshelf. I have decided to take the template method pattern in this case, because the Parse() should handle the IO for all implementations and the concrete parsing should done in its derived classes.   public CoffHeader Parse() { using (var br = new BinaryReader(File.Open(_fileName, FileMode.Open, FileAccess.Read, FileShare.Read))) { SeekToPeSignature(br); if (!IsValidPeSignature(br)) { throw new BadImageFormatException(); } return ParseInternal(br); } } protected abstract CoffHeader ParseInternal(BinaryReader br);   First we open the BinaryReader, seek to the PE signature then we check if it contains a valid PE signature and rest is done by the derived implementations. Byte4ByteCoffReader The first solution is using the BinaryReader. It is the general way to get the data. We only need to know which order, which data-type and its size. If we read byte for byte we could comment out the first line in the CoffHeader structure, because we have control about the order of the member assignment.   protected override CoffHeader ParseInternal(BinaryReader br) { CoffHeader coff = new CoffHeader(); coff.Machine = (MachineType)br.ReadInt16(); coff.NumberOfSections = (ushort)br.ReadInt16(); coff.TimeDateStamp = br.ReadUInt32(); coff.PointerToSymbolTable = br.ReadUInt32(); coff.NumberOfSymbols = br.ReadUInt32(); coff.SizeOfOptionalHeader = (ushort)br.ReadInt16(); coff.Characteristics = (Characteristic)br.ReadInt16(); return coff; }   If the structure is as short as the COFF header here and the specification will never changed, there is probably no reason to change the strategy. But if a data-type will be changed, a new member will be added or ordering of member will be changed the maintenance costs of this method are very high. UnsafeCoffReader Another way to bring the data into this structure is using a "magically" unsafe trick. As above, we know the layout and order of the data structure. Now, we need the StructLayout attribute, because we have to ensure that the .NET Runtime allocates the structure in the same order as it is specified in the source code. We also need to enable "Allow unsafe code (/unsafe)" in the project's build properties. Then we need to add the following constructor to the CoffHeader structure.   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { unsafe { fixed (byte* packet = &data[0]) { this = *(CoffHeader*)packet; } } } }   The "magic" trick is in the statement: this = *(CoffHeader*)packet;. What happens here? We have a fixed size of data somewhere in the memory and because a struct in C# is a value-type, the assignment operator = copies the whole data of the structure and not only the reference. To fill the structure with data, we need to pass the data as bytes into the CoffHeader structure. This can be achieved by reading the exact size of the structure from the PE file.   protected override CoffHeader ParseInternal(BinaryReader br) { return new CoffHeader(br.ReadBytes(Marshal.SizeOf(typeof(CoffHeader)))); }   This solution is the fastest way to parse the data and bring it into the structure, but it is unsafe and it could introduce some security and stability risks. ManagedCoffReader In this solution we are using the same approach of the structure assignment as above. But we need to replace the unsafe part in the constructor with the following managed part:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { IntPtr coffPtr = IntPtr.Zero; try { int size = Marshal.SizeOf(typeof(CoffHeader)); coffPtr = Marshal.AllocHGlobal(size); Marshal.Copy(data, 0, coffPtr, size); this = (CoffHeader)Marshal.PtrToStructure(coffPtr, typeof(CoffHeader)); } finally { Marshal.FreeHGlobal(coffPtr); } } }     Conclusion We saw that we can parse well-formed binary data to our data structures using different approaches. The first is probably the clearest way, because we know each member and its size and ordering and we have control about the reading the data for each member. But if add member or the structure is going change by some reason, we need to change the reader. The two other solutions use the approach of the structure assignment. In the unsafe implementation we need to compile the project with the /unsafe option. We increase the performance, but we get some security risks.

    Read the article

  • MSBuild: convert relative path in imported project to absolute path.

    - by Ergwun
    Short version: I have an MSBuild project that imports another project. There is a property holding a relative path in the imported project that is relative to the location of the imported project. How do I convert this relative path to be absolute? I've tried the ConvertToAbsolutePath task, but this makes it relative to the importing project's location). Long version: I'm trying out Robert Koritnik's MSBuild task for integrating nunit output into Visual Studio (see this other SO question for a link). Since I like to have all my tools under version control, I want the target file with the custom task in it to point to the nunit console application using a relative path. My problem is that this relative path ends up being made relative to the importing project. E.g. (in ... MyRepository\Third Party\NUnit\MSBuild.NUnit.Task.Source\bin\Release\MSBuild.NUnit.Task.Targets): ... <PropertyGroup Condition="'$(NUnitConsoleToolPath)' == ''"> <NUnitConsoleToolPath>..\..\..\NUnit 2.5.5\bin\net-2.0</> </PropertyGroup> ... <Target Name="IntegratedTest"> <NUnitIntegrated TreatFailedTestsAsErrors="$(NUnitTreatFailedTestsAsErrors)" AssemblyName="$(AssemblyName)" OutputPath="$(OutputPath)" ConsoleToolPath="$(NUnitConsoleToolPath)" ConsoleTool="$(NUnitConsoleTool)" /> </Target> ... The above target fails with the error that the file cannot be found (that is the nunit-console.exe file). Inside the NUnitIntegrated MSBuild task, when the the execute() method is called, the current directory is the directory of the importing project, so relative paths will point to the wrong location. I tried to convert the relative path to absolute by adding these tasks to the IntegratedTest target: <ConvertToAbsolutePath Paths="$(NUnitConsoleToolPath)"> <Output TaskParameter="AbsolutePaths" PropertyName="AbsoluteNUnitConsoleToolPath"/> </ConvertToAbsolutePath> but this just converted it to be relative to the directory of the project file that imports this target file. I know I can use the property $(MSBuildProjectDirectory) to get the directory of the importing project, but can't find any equivalent for directory of the imported target file. Can anyone tell me how a path in an imported file that is supposed to be relative to the directory that the imported file is in can be made absolute? Thanks!

    Read the article

  • Using FFmpeg in c#?

    - by daniel
    So i know its a fairly big challenge but i want to write a basic movie player/converter in c# using the FFmpeg library. However the first obstacle i need to overcome is wrapping the FFmpeg library in c#. I downloaded ffmpeg but couldn't compile it on windows, so i downloaded a precompiled version for me. Ok awesome. Then i started looking for c# wrappers. I have looked around and have found a few wrappers such as SharpFFmpeg (http://sourceforge.net/projects/sharpffmpeg/) and ffmpeg-sharp (http://code.google.com/p/ffmpeg-sharp/). First of all i wanted to use ffmpeg-sharp as its LGPL and SharpFFmpeg is GPL. However it had quite a few compile errors. Turns out it was written for the mono compiler, i tried compiling it with mon but couldn't figure out how. I then started to manually fix the compiler errors myself, but came across a few scary ones and thought i'd better leave those alone. So i gave up on ffmpeg-sharp. Then i looked at SharpFFmpeg and it looks like what i want, all the functions P/Invoked for me. However its GPL? Both the AVCodec.cs and AVFormat.cs files look like ports of avcodec.c and avformat.c which i reckon i could port myself? Then not have to worry about licencing. But i wan't to get this right before i go ahead and start coding. Should I: Write my own c++ library for interacting with ffmpeg, then have my c# program talk to the c++ library in order to play/convert videos etc. OR Port avcodec.h and avformat.h (is that all i need?) to c# by using a whole lot of DllImports and write it entirely in c#? First of all consider that i'm not great at c++ as i rarely use it but i know enough to get around. The reason i'm thinking #1 might be the better option is that most FFmpeg tutorials are in c++ and i'd also have more control over memory management that if i was to do it in c#. What do you think? Also would you happen to have any usefull links (perhaps a tutorial) for using FFmpeg? EDIT: spelling mistakes

    Read the article

  • Week in Geek: LastPass Rescues Xmarks Edition

    - by Asian Angel
    This week we learned how to breathe new life into an aging Windows Mobile 6.x device, use filters in Photoshop, backup and move VirtualBox machines, use the BitDefender Rescue CD to clean an infected PC, and had fun setting up a pirates theme on our computers. Photo by _nash. Weekly Feature Do you love using the Faenza icon set on your Ubuntu system but feel that there are a few much needed icons missing (or you desire a different version of a particular icon)? Then you may want to take a look at the Faenza Variants icon pack. The icons are available in the following sizes: 16px, 22px, 32px, 48px and scalable sizes. Photo by Asian Angel. Faenza Variants Random Geek Links Another week with extra link goodness to help keep you on top of the news. Photo by Asian Angel. LastPass acquires Xmarks, premium service announced Xmarks announced that it has been acquired by LastPass, a cross-platform password management service. This also means that Xmarks is now in transition from a “free” to a “freemium” business model. WikiLeaks reappears on European Net domains WikiLeaks has re-emerged on a Swiss Internet domain followed by domains in Germany, Finland, and the Netherlands, sidestepping a move that had in effect taken the controversial site off the Internet. Iran: Yes, Stuxnet hurt our nuclear program The Stuxnet worm got some big play from Iranian President Mahmoud Ahmadinejad, who acknowledged that the malware dinged his nuclear program. More Windows Rogues than Just AV – Fake Defragmenter Check Disk Don’t think for a second that rogues are limited to scareware, because as so-called products such as “System Defragmenter”, “Scan Disk” “Check Disk” prove, they’re not. Internet Explorer’s Protected Mode can be bypassed Researchers from Verizon Business have now described a way of bypassing Protected Mode in IE 7 and 8 in order to gain access to user accounts. Can you really see who viewed your Facebook profile? Rogue application spreads virally Once again, a rogue application is spreading virally between Facebook users pretending to offer you a way of seeing who has viewed your profile. More holes in Palm’s WebOS Researchers Orlando Barrera and Daniel Herrera, who both work for security firm SecTheory, have discovered a gaping security hole in Palm’s WebOS smartphone operating system. Next-gen banking Trojans hit APAC With the proliferation of banking Trojans, Web and smartphone users of online banking services have to be on constant alert to avoid falling prey to fraud schemes, warned Etay Maor, project manager for RSA Fraud Action. AVG update cripples 64-bit computers A signature update automatically deployed by the AVG virus scanner Thursday has crippled numerous computers. Article includes link to forums to fix computers affected after a restart. Congress moves to outlaw ‘mystery charges’ for Web shoppers Legislation that makes it illegal for Web merchants and so-called post-transaction marketers to charge credit cards without the card owners’ say-so came closer to becoming law this week. Ballmer Set to “Look Into” Windows Home Server Drive Extender Fiasco Tuesday’s announcement from Microsoft regarding the removal of Drive Extender from Windows Home Server has sent shock waves across the web. Google tweaks search recipe to ding scam artists Google has changed its search algorithm to penalize sites deemed to provide an “extremely poor user experience” following a New York Times story on a merchant who justified abusive behavior towards customers as a search-engine optimization tactic. Geek Video of the Week Watch as our two friends debate back and forth about the early adoption of new technology through multiple time periods (Stone Age to the far future). Will our reluctant friend finally succumb to the temptation? Photo by CollegeHumor. Early Adopters Through History Random TinyHacker Links Fix Issues in Windows 7 Using Reliability Monitor Learn how to analyze Windows 7 errors and then fix them using the built-in reliability monitor. Learn About IE Tab Groups Tab groups is a useful feature in IE 8. Here’s a detailed guide to what it is all about. Google’s Book Helps You Learn About Browsers and Web A cool new online book by the Google Chrome team on browsers and the web. TrustPort Internet Security 2011 – Good Security from a Less Known Provider TrustPort is not exactly a well-known provider of security solutions. At least not in the consumer space. This review tests in detail their latest offering. How the World is Using Cell phones An infographic showing the shocking demographics of cell phone use. Super User Questions See the great answers to these questions from Super User. I am unable to access my C drive. It says it is unable to display current owner. List of Windows special directories/shortcuts like ‘%TEMP%’ Is using multiple passes for wiping a disk really necessary? How can I view two files side by side in Notepad++ Is there any tool that automatically puts screenshots to my Dropbox? How-To Geek Weekly Article Recap Look through our hottest articles from this past week at How-To Geek. How to Create a Software RAID Array in Windows 7 9 Alternatives for Windows Home Server’s Drive Extender Why Doesn’t Disk Cleanup Delete Everything from the Temp Folder? Ask the Readers: How Much Do You Customize Your Operating System? How to Upload Really Large Files to SkyDrive, Dropbox, or Email One Year Ago on How-To Geek Enjoy reading through these awesome articles from one year ago. How To Upgrade from Vista to Windows 7 Home Premium Edition How To Fix No Aero Transparency in Windows 7 Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista Rename the Guest Account in Windows 7 for Enhanced Security Disable Error Reporting in XP, Vista, and Windows 7 The Geek Note That wraps things up here for this week. Regardless of the weather wherever you may be, we hope that you have an opportunity to get outside and have some fun! Remember to keep sending those great tips in to us at [email protected]. Photo by Tony the Misfit. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

    Read the article

  • how to enable SQL Application Role via Entity Framework

    - by Ehsan Farahani
    I'm now developing big government application with entity framework. at first i have one problem about enable SQL application role. with ado.net I'm using below code: SqlCommand cmd = new SqlCommand("sys.sp_setapprole"); cmd.CommandType = CommandType.StoredProcedure; cmd.Connection = _sqlConn; SqlParameter paramAppRoleName = new SqlParameter(); paramAppRoleName.Direction = ParameterDirection.Input; paramAppRoleName.ParameterName = "@rolename"; paramAppRoleName.Value = "AppRole"; cmd.Parameters.Add(paramAppRoleName); SqlParameter paramAppRolePwd = new SqlParameter(); paramAppRolePwd.Direction = ParameterDirection.Input; paramAppRolePwd.ParameterName = "@password"; paramAppRolePwd.Value = "123456"; cmd.Parameters.Add(paramAppRolePwd); SqlParameter paramCreateCookie = new SqlParameter(); paramCreateCookie.Direction = ParameterDirection.Input; paramCreateCookie.ParameterName = "@fCreateCookie"; paramCreateCookie.DbType = DbType.Boolean; paramCreateCookie.Value = 1; cmd.Parameters.Add(paramCreateCookie); SqlParameter paramEncrypt = new SqlParameter(); paramEncrypt.Direction = ParameterDirection.Input; paramEncrypt.ParameterName = "@encrypt"; paramEncrypt.Value = "none"; cmd.Parameters.Add(paramEncrypt); SqlParameter paramEnableCookie = new SqlParameter(); paramEnableCookie.ParameterName = "@cookie"; paramEnableCookie.DbType = DbType.Binary; paramEnableCookie.Direction = ParameterDirection.Output; paramEnableCookie.Size = 1000; cmd.Parameters.Add(paramEnableCookie); try { cmd.ExecuteNonQuery(); SqlParameter outVal = cmd.Parameters["@cookie"]; // Store the enabled cookie so that approle can be disabled with the cookie. _appRoleEnableCookie = (byte[]) outVal.Value; } catch (Exception ex) { result = false; msg = "Could not execute enable approle proc." + Environment.NewLine + ex.Message; } But no matter how much I searched I could not find a way to implement on EF. Another question is: how to Add Application Role to Entity data model designer? I'm using the below code for execute parameter with EF: AEntities ar = new AEntities(); DbConnection con = ar.Connection; con.Open(); msg = ""; bool result = true; DbCommand cmd = con.CreateCommand(); cmd.CommandType = CommandType.StoredProcedure; cmd.Connection = con; var d = new DbParameter[]{ new SqlParameter{ ParameterName="@r", Value ="AppRole",Direction = ParameterDirection.Input} , new SqlParameter{ ParameterName="@p", Value ="123456",Direction = ParameterDirection.Input} }; string sql = "EXEC " + procName + " @rolename=@r,@password=@p"; var s = ar.ExecuteStoreCommand(sql, d); When run ExecuteStoreCommand this line return error: Application roles can only be activated at the ad hoc level.

    Read the article

  • Week in Geek: New Security Flaw Confirmed for Internet Explorer Edition

    - by Asian Angel
    This week we learned how to use a PC to stay entertained while traveling for the holidays, create quality photo prints with free software, share links between any browser and any smartphone, create perfect Christmas photos using How-To Geek’s 10 best how-to photo guides, and had fun decorating Firefox with a collection of Holiday 2010 Personas themes. Photo by Repoort. Random Geek Links Photo by Asian Angel. Critical 0-Day Flaw Affects All Internet Explorer Versions, Microsoft Warns Microsoft has confirmed a zero-day vulnerability affecting all supported versions of Internet Explorer, including IE8, IE7 and IE6. Note: Article contains link to Microsoft Security Advisory detailing two work-arounds until a security update is released. Hackers targeting human rights, indie media groups Hackers are increasingly hitting the Web sites of human rights and independent media groups in an attempt to silence them, says a new study released this week by Harvard University’s Berkman Center for Internet & Society. OpenBSD: audits give no indication of back doors So far, the analyses of OpenBSD’s crypto and IPSec code have not provided any indication that the system contains back doors for listening to encrypted VPN connections. But the developers have already found two bugs during their current audits. Sophos: Beware Facebook’s new facial-recognition feature Facebook’s new facial recognition software might result in undesirable photos of users being circulated online, warned a security expert, who urged users to keep abreast with the social network’s privacy settings to prevent the abovementioned scenario from becoming a reality. Microsoft withdraws flawed Outlook update Microsoft has withdrawn update KB2412171 for Outlook 2007, released last Patch Tuesday, after a number of user complaints. Skype: Millions still without service Skype was still working to right itself going into the holiday weekend from a major outage that began this past Wednesday. Mozilla improves sync setup and WebGL in Firefox 4 beta 8 Firefox 4.0 beta 8 brings better support for WebGL and introduces an improved setup process for Firefox Sync that simplifies the steps for configuring the synchronization service across multiple devices. Chrome OS the litmus test for cloud The success or failure of Google’s browser-oriented Chrome OS will be the litmus test to decide if the cloud is capable of addressing user needs for content and services, according to a new Ovum report released Monday. FCC Net neutrality rules reach mobile apps The Federal Communications Commission (FCC) finally released its long-expected regulations on Thursday and the related explanations total a whopping 194 pages. One new item that was not previously disclosed: mobile wireless providers can’t block “applications that compete with the provider’s” own voice or video telephony services. KDE and the Document Foundation join Open Invention Network The KDE e.V. and the Document Foundation (TDF) have both joined the Open Invention Network (OIN) as licensees, expanding the organization’s roster of supporters. Report: SEC looks into Hurd’s ousting from HP The scandal surrounding Mark Hurd’s departure from the world’s largest technology company in August has officially drawn attention from the U.S. Securities and Exchange Commission. Report: Google requests delay of new Google TVs Google TV is apparently encountering a bit of static that has resulted in a programming change. Geek Video of the Week This week we have a double dose of geeky video goodness for you with the original Mac vs PC video and the trailer for the sequel. Photo courtesy of Peacer. Mac vs PC Photo courtesy of Peacer. Mac vs PC 2 Trailer Random TinyHacker Links Awesome Tools To Extract Audio From Video Here’s a list of really useful, and free tools to rip audio from videos. Getting Your iPhone Out of Recovery Mode Is your iPhone stuck in recovery mode? This tutorial will help you get it out of that state. Google Shared Spaces Quickly create a shared space and collaborate with friends online. McAfee Internet Security 2011 – Upgrade not worthy of a version change McAfee has released their 2011 version of security products. And as this review details, the upgrades are minimal when compared to their 2010 products. For more information, check out the review. 200 Countries Plotted Hans Rosling’s famous lectures combine enormous quantities of public data with a sport’s commentator’s style to reveal the story of the world’s past, present and future development. Now he explores stats in a way he has never done before – using augmented reality animation. Super User Questions Enjoy looking through this week’s batch of popular questions and answers from Super User. How to restore windows 7 to a known working state every time it boots? Is there an easy way to mass-transfer all files between two computers? Coffee spilled inside computer, damaged hard drive Computer does not boot after ram upgrade Keyboard not detected when trying to install Ubuntu 10.10 How-To Geek Weekly Article Recap Have you had a super busy week while preparing for the holiday weekend? Then here is your chance to get caught up on your reading with our five hottest articles for the week. Ask How-To Geek: Rescuing an Infected PC, Installing Bloat-free iTunes, and Taming a Crazy Trackpad How to Use the Avira Rescue CD to Clean Your Infected PC Eight Geektacular Christmas Projects for Your Day Off VirtualBox 4.0 Rocks Extensions and a Simplified GUI Ask the Readers: How Many Monitors Do You Use with Your Computer? One Year Ago on How-To Geek Here are more great articles from one year ago for you to read and enjoy during the holiday break. Enjoy Distraction-Free Writing with WriteMonkey Shutter is a State of Art Screenshot Tool for Ubuntu Get Hex & RGB Color Codes the Easy Way Find User Scripts for Your Favorite Websites the Easy Way Access Your Unsorted Bookmarks the Easy Way (Firefox) The Geek Note That “wraps” things up for this week and we hope that everyone enjoys the rest of their holiday break! Found a great tip during the break? Then be sure to send it in to us at [email protected]. Photo by ArSiSa7. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Simon’s Cat Explores the Christmas Tree! [Video] The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video]

    Read the article

  • WCF configuration for WebHttpBinding(Restful) for supporting both HTTP and HTTPS

    - by KSS
    We are using AJAX Cascading dropdown and AutoComplete functionality with Restful WebService Services providing data. With one endpoint(non-secured) eveything was working fine, until we tried same web page with https. Our Webappplication needs to support both. Our of very few articiles/blogs on this issue I found 2 which applies to my requirements. 1. http://blog.abstractlabs.net/2009/02/ajax-wcf-services-and-httphttps.html 2. _http://www.mydotnetworld.com/post/2008/10/18/Use-a-WCF-Service-with-HTTP-and-HTTPS-in-C.aspx I followed same pattern, added 2 endpoints, assuming WCF will pickup appropriate endpoint looking at HTTP or HTTPS protocol. Worked like a charm in my dev machine(XP-IIS5) and 1 Server 2003R2(IIS6), however did work in Production server 2003-IIS6. Website in IIS is exact same(including permission etc). The error it throws - Error 500(Could not find a base address that matches scheme https for the endpoint with binding WebHttpBinding. Registered base address schemes are [http]..) Here's the sample configuration(ignore typos) <system.serviceModel> <bindings> <webHttpBinding> <binding name="SecureBinding"> <security mode="Transport"/> </binding> </webHttpBinding> </bindings> <behaviors> <endpointBehaviors> <behavior name="SearchServiceAspNetAjaxBehavior"> <enableWebScript /> </behavior> </endpointBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <services> <service name="SearchService"> <endpoint address="" behaviorConfiguration="SearchServiceAspNetAjaxBehavior" binding="webHttpBinding" contract="SearchServiceContract" /> <endpoint address="" behaviorConfiguration="SearchServiceAspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="SecureBinding" contract="SearchServiceContract" /> </service> </services> </system.serviceModel> Any help on this is highly appreciated ? Thanks KSS

    Read the article

< Previous Page | 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148  | Next Page >