Search Results

Search found 7529 results on 302 pages for 'replace'.

Page 218/302 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• Excel 2007 - Adding line breaks in a cell and no line over 50 characters

  - by Richard Drew

  I have notes stored in an excel cell. I add line breaks and dates every time I add a new note. I need to copy this to another program, but it has a line limit of 50 characters. I want a line break for each new date and for when each date's comment goes over 50 characters. I'm able to do one or the other, but I can't figure out how to do both. I'd prefer words not to be split up, but at this point I don't care. Below is some sample input. If needed for a SUBSTITUTE or REPLACE function, I could add a ~ before each date in my input as a delimiter. Sample Input: 07/03 - FU on query. Copies and history included. CC to Jane Doe and John Public 06/29 - Cust claiming not to have these and wrong PO on query form. Responded with inv sent dates and locations, correct PO values, and copies. 06/27 - New ticket opened using query form 06/12 - Opened ticket with helpdesk asking status 05/21 - Copy submitted to [email protected] 05/14 - Copy sent to John Public and [email protected] Ideal Output: 07/03 - FU on query. Copies and history included. CC to Jane Doe and John Public 06/29 - Cust claiming not to have these and wrong PO on query form. Responded with inv sent dates an d locations, correct PO values, and copies. 06/27 - New ticket opened using query form 06/12 - Opened ticket with helpdesk asking status 05/21 - Copy submitted to [email protected] om 05/14 - Copy sent to John Public and email@custome r.com

  Read the article

• Substiting a line through PHP in SSH

  - by Asad Moeen

  I've already setup SSH usage in PHP and most of the things work. Now what I want to do is that I'm looking to edit a line in a file and replace it back. It works directly on the server but can't seem to get it working with PHP files. Here is what I'm trying. $new_line1 = 'Line $I want to add - The $I has to go into the file as it is'; $new_line2 = 'Ending $text of the line - $text again goes into file; $query = "Addition to line"; $exec1= 'cd /root; perl -pe "s/.*/' ; $exec2= '/ if $. == 37" Edit.sh > Edited.sh'; $new="$exec1$new_line1$query$new_line2$exec2"; $edit="cd /root/mp; cp Edited.sh Edit.sh"; echo $ssh->exec($new); echo $ssh->exec($edit); Now the thing is that running the perl command directly in SSH works without any errors but when I run this through PHP I get the error: Substitution replacement not terminated at -e line 1. I want to know why would it work this way and not that?

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• Scripting an 'empty' password in /etc/shadow

  - by paddy

  I've written a script to add CVS and SVN users on a Linux server (Slackware 14.0). This script creates the user if necessary, and either copies the user's SSH key from an existing shell account or generates a new SSH key. Just to be clear, the accounts are specifically for SVN or CVS. So the entry in /home/${username}/.ssh/authorized_keys begins with (using CVS as an example): command="/usr/bin/cvs server",no-port-forwarding,no-agent-forwarding,no-X11-forwarding,no-pty ssh-rsa ....etc...etc...etc... Actual shell access will never be allowed for these users - they are purely there to provide access to our source repositories via SSH. My problem is that when I add a new user, they get an empty password in /etc/shadow by default. It looks like: paddycvs:!:15679:0:99999:7::: If I leave the shadow file as is (with the !), SSH authentication fails. To enable SSH, I must first run passwd for the new user and enter something. I have two issues with doing that. First, it requires user input which I can't allow in this script. Second, it potentially allows the user to login at the physical terminal (if they have physical access, which they might, and know the secret password -- okay, so that's unlikely). The way I normally prevent users from logging in is to set their shell to /bin/false, but if I do that then SSH doesn't work either! Does anyone have a suggestion for scripting this? Should I simply use sed or something and replace the relevant line in the shadow file with a preset encrypted secret password string? Or is there a better way? Cheers =)

  Read the article

• Jobs with anacron won't run

  - by mareser

  I would like to run two bash scripts daily using anacron in order to backup some data. Unfortunately I can't figure out why said scripts are not executed. For test purposes I let cron execute the scripts and it worked fine. cat /etc/anacrontab gives # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # These replace cron's entries 1 5 cron.daily nice run-parts --report /etc/cron.daily 7 10 cron.weekly nice run-parts --report /etc/cron.weekly @monthly 15 cron.monthly nice run-parts --report /etc/cron.monthly 1 5 TB_bak /bin/sh /home/vasco2/Dropbox/Scripts/backup_TB.sh 1 5 key_db_bak /bin/sh /home/vasco2/Dropbox/Scripts/bak_key_db.sh The output of ls ~/Dropbox/Scripts/ is backup_TB.sh bak_key_db.sh I use Linux Mint Katya. uname -a gives Linux vasco2 2.6.38-8-generic-pae #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 i686 i686 i386 GNU/Linux I would be very happy if somebody could point me in the right direction on why those scripts won't get executed. P.S.: There is no anacron tag on superuser.com. Maybe somebody wants to change that.

  Read the article

• Using virtualization infrastructure for J2EE application distribution- viable alternative?

  - by Dan

  Our company builds custom J2EE web solutions. At the moment, we use standard J2EE distribution mechanisms (ear/war archives). Application servers are generally administered by our clients' IT departments and since we do not have complete control over the environment, a lot of entropy can be introduced into the solution. For example: latest app. server patch not applied conflicting third party libraries inside the app. server root server runtime and tuning parameters not configured (for example, number of connections in database pool) We are looking into using virtualization infrastructure for J2EE application distribution. Instead of sending the ear/war archive, we’d send image with application server node and our application preinstalled. Some of the benefits are same as using with using virtualization infrastructure in general, namely better use of hardware resources. For us, it reduces the entropy of hosting infrastructure - distributing VM should be less affected by hosting environment. So far, the downside I see can be in application server licenses, here they will have to use dedicated servers for our solution, but this is generally already done that way. Also, there is a complexity with maintaining virtualization infrastructure, but this is often something IT departments have more experience with than with administering and fine-tuning J2EE solutions. Anyone has experience with this model? What are the downsides? Will we not just replace one type of complexity with other?

  Read the article

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• Problems compiling coreutils-8.5 on Solaris 5.10 on Intel platform

  - by PP

  I am having trouble compiling coreutils-8.5 on Solaris 5.10 on the Intel platform using cc. Firstly I had the following error during ./configure: checking whether <wchar.h> uses 'inline' correctly... no configure: error: <wchar.h> cannot be used with this compiler (/tool/sunstudio12.1/bin/cc -xc99=all -g -D_REENTRANT). This seemed similar to the problem in this question. The solution was to edit configure and replace the reference of -xc99=all to -xc99=all,no_lib. This permitted the configure to complete. Then I ran /usr/sfw/bin/gmake and it progressed until I received the following message: Making all in src gmake[2]: Entering directory `/home/peterp/src/coreutils-8.5/src' gmake all-am gmake[3]: Entering directory `/home/peterp/src/coreutils-8.5/src' CCLD chroot Undefined first referenced symbol in file eaccess ../lib/libcoreutils.a(euidaccess.o) ld: fatal: Symbol referencing errors. No output written to chroot What could cause this problem? PS I was only compiling coreutils because I wanted colour ls.

  Read the article

• Windows ACL inheritance issues for FTP server and automated tools

  - by Martin Sall

  I have set up Cerberus FTP server. By default, Cerberus FTP service runs under SYSTEM ACCOUNT. Also I have some console applications which run as scheduled tasks. They are running under a dedicated "Utilities" user account which has "Log on as batch job" permissions. These console applications take uploaded FTP files, process them and then move them to some dedicated archive folder. The problem is that my console apps are throwing Security exceptions when trying to acces the uploaded files. I tried to give the Full control permissions on the ftproot folder for my "Utilities" account and I have checked that "Replace all Child object permissions with inheritable permissions from this object" checkbox, but it affects only current files. When new files are uploaded, they again are not accessible by my "Utilities" account. I tried to go another way and put Cerberus FTP service under "Utilities" account. Then I also needed to give "Utilities" account permissions on Cerberus Data folder in ProgramData. Still no luck - after this operation, Cerberus internal SOAP web service stopped working (although everything else seems to work). I need that SOAP service to be available, so running the Cerberus FTP under "Utilities" account seems to be not an option. Unless I find out, what else do I need to set up for that "Utilities" account to stop Cerberus from complaining. I guess, Cerberus is uploading files to some temporary folder and so those files get the permissions form that folder and keep the same permissions even after moved to the ftproot. What would be the right solution for this which would grant Cerberus FTP server and the "Utilities" account minimal needed permissions to access the contents of the ftproot folder?

  Read the article

• How to calculate unweighted averages in Excel PivotTable?

  - by yonatron

  I often make PivotTables in which each row contains a number of per-person average measures. I then want to look at the unweighted column average for each measure, and usually make some kind of chart from these. Because my individual cells are often averaged from different numbers of data points, the Grand Total row ends up being a weighted average, which I’m not interested in. So I usually make my own average row a few rows above the table to use for my charts. That’s not too much work, but there’s another problem. I often add a few more people’s worth of data to the PivotTables’ source, then refresh the tables. This means my average row needs to be updated to encompass more rows from the PivotTable. Not a huge deal with one table, but when I have lots of them across lots of sheets, I have to do find/replace on a whole bunch of formulas. So: is there a way to automatically get unweighted column averages in a PivotTable, such that when the table is refreshed, the averages don’t change locations and encompass the newly added (or removed) data Thanks

  Read the article

• Laptop battery holds charge, but won't charge any more.

  - by Jeff

  Ok, I'm sure I will need to replace either my battery or my AC adapter, but would rather not buy one if the other is the problem. My problem is. I have a Sager laptop that gets quite a bit of use. The charging has always been a little bit odd. If I was in the process of using it, it would charge just fine and stay On AC power. If I left it alone, however(power settings to ONLY turn off the monitor) in either Ubuntu or Windows 7 it decides that it didn't want to use AC power anymore and would just start draining the battery until it died. Now, suddenly, it won't charge at all. The capacity was great up to this point which happened in an instant. It will recognize the battery but won't see the AC power if plugged in while the battery is in. I can power up the laptop without the battery and it works fine. If I plug in the battery while powered up it will claim it's charging it, but it stays at the same percentage. If I unplug the power, it will switch over to Battery fine, but I have to power down and unplug the battery to get it back on AC power. I've had dying/dead batteries before but they typically won't hold a full charge anymore but it still winds up to 100% then drops quickly when unplugged. This seems more like a chip problem in the battery to me, but I'm not sure. Any ideas?

  Read the article

• Can I take my ReadyNAS drive in Raid1 and plug it straight into new different machine?

  - by jacko

  I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS? Edit: Ok after further reading it seems that the ReadyNAS Duo formats my drive as ext3 in 16k blocks. There are instructions for mounting a drive into a linux box here: Mounting Sparc-based ReadyNAS Drives in x86-based Linux There is also talk about a linux image here: ReadyNAS Data Recovery - VMware recovery tool I'm not sure whether this means they ReadyNAS actually implements software raid under the hood, or what? So it appears like it IS do-able, but do any of you linux guru's know whether this is viable and whether the fact that they are in raid 1 affect matters?

  Read the article

• Command line scripts to restore the 4 system databases of MS SQL Server 2008

  - by ciscokid

  Hi there, can someone give me some advice on how to restore the 4 system databases (master, msdb, model, tempdb) of a sql server 2008 please? I've already done some testing myself (on restoring the master database) with the following commad line script as a result: ::set variables set dbname=master set dbdirectory=C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA title Restoring %dbname% database net stop mssqlserver cd C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn sqlservr -m sqlcmd -Slocalhost -E -Q "restore database master from disk='c:\master.bak' WITH REPLACE" net start mssqlserver pause After the execution of the 'sqlservr -m' command (used to start the server instance in single-user mode, which is only necessary when restoring the MASTER database), the script stops. So in order to execute the last 2 commands I need to separate the script into 2 smaller scripts, and run them one after the other. Does anyone has an idea on how I can merge them into one single script that runs completely without any interruption? I also want to restore the other 3 system databases using command line scripts like this one. Can someone please advice me how I need to go on? I've already noticed that restoring the temdb is not so easy, but there has to be a way... Looking forward to your advice!

  Read the article

• Why do you use a 3PAR SAN? [closed]

  - by Starfish

  If you use a 3PAR SAN, I’d like to hear what you think about it, particularly compared to the HP EVA. What do you see as its advantages over other SANs like the EVA? What’s so special about the ASIC? We had HP quote us an EVA P6500 and 3PAR V400 with equivalent storage and the 3PAR was nearly twice the cost. My site has two EVA SANs with a combined capacity of ~80 TB. We want to replace the older and larger of the two. We’ve been looking at the EVA and the 3PAR to see which would be a better fit for us. I’m struggling to understand how the 3PAR differs from the EVA from a practical technical standpoint. When I read the sales literature and speak with the HP sales engineers, they spend a lot of time talking about how the 3PAR is better because of its ASIC. It’s ASIC this and ASIC that, but when I press them on how a 3PAR with thin provisioning is better than an EVA with thin provisioning, I can’t get a straight answer. Meanwhile, one of my colleagues, who has more say regarding which SAN we get, is enamored by the 3PAR, and he can’t explain clearly to me why he wants it over the EVA. Our needs are pretty simple. We have 10 servers running VMware and ~100 VMs. We use VMware’s thin provisioning currently, but we would like to start using thin provisioning on the new SAN. We don’t have a need for SSDs or migration between storage tiers. We plan on having FC or SAS drives for our most used data and SATA/FATA drives for the lesser used data which is how we have the EVAs configured. We also do not need any SAN-level snapshotting or replication.

  Read the article

• Understanding the Mounting of a Filesystem

  - by Tom H.

  I'm new to linux and want to check my understanding of how mounting/filesystems work. I read related manpages, but just want to be sure. I have a partition say /dev/sda5 that is currently mounted to /home with various subdirs. It is my understanding that this means /dev/sda5 has its own portable filesystem that can be moved anywhere in the main filesystem. Questions: If I unmount /dev/sda5 from /home (# umount /home) and then mount it to /var/www/ (which is empty) (# mount -t ext3 /dev/sda5 /var/www) and replace the fstab entry, with /dev/sda5 /var/www ext3 defaults,noatime,nodev 1 2 and # mount -a, Q1) are all of the contents of /home now accessible under /var/www/ (i.e. /home/username -> /var/www/username)? Q2) Are all of the permissions from the /home filesystem kept intact in this new location? Anything else I should be concerned with? Just want to make sure I don't go wipe/corrupt anything. Coming from Windows the filesystem architecture takes getting used to (though I'm loving the flexibility!).

  Read the article

• What precautions should I take once defective RAM has been replaced?

  - by DustByte

  I recently discovered that my RAM is faulty (MemTest86+). I am waiting for new RAM to be sent to me.  It was through sheer luck that I discovered something was wrong. I was copying a large amount of big files and decided to verify the copies by their checksums. I discovered strange discrepancies, and noticed that checksum computation for the same file was not consistent. Now, this is the only problem I have encountered; no BSOD, no crashes, no errors. In a sense this makes me more worried than if I would have had massive crashes. I have no idea for how long the RAM has been faulty, and I have no idea if corrupt bits have been saved into files on my hard drives. I do know the RAM was fine two months ago (tested it back then). I am a user of Adobe's Lightroom and I am worried that photos or the catalog itself could carry corrupt data. Question: what should I do once new healthy RAM has been installed? Reinstall Windows (I'm using Windows 7, 64 bit)? Is there a risk that I will be presented with nasty surprises in the future if I don't? What about personal files? I have backups of some of the files but for newer files I'm not sure I can even trust the backups. It's going to take me many hard hours to manually replace files with older versions, or compare checksums.

  Read the article

• Drivers and firmware for the LiteOn ihap-122-9 DVD drive

  - by Sandy

  I'm trying to replace the DVD drive in my old PC. LiteOn.com is a mess and I can't find a single working driver or firmware update there, or anywhere. Windows XP tries to use a default, generic driver dated 2001. (About 9 years before this drive even existed.) http://www.firmwarehq.com/download_1..._6L0H.EXE.html This correctly finds my LiteOn ihap-122-9 DVD Drive. It correctly finds that I'm currently using firmware 6L0F. It correctly tries to install 6L0H. It completes 100% but then just fails and says "contact your vendor". Does anyone know why? Where can I actually get drivers... and firmware updates... that actually work for the ihap-122-9? Apparently, the newest driver IS the 1 made 9 years before the drive existed. (Unbelievable.) And the latest firmware is the 1 that is already in the drive. (Common.) No other drive I've had in this computer ever had a problem. This brand new LiteOn is doing this: Opening MY COMPUTER now takes 60 seconds. MY COMPUTER marking the drive as "DVD F:" takes another 30 seconds. MY COMPUTER showing "Batman II" title takes another 15 seconds. Clicking and running the movie will take another 30 seconds for the main-menu to appear. The movie starts about 20 seconds later. The movie runs fine for 1-2 seconds... then stops for 5 seconds.... then starts again and plays for 1-2 seconds. Repeats for 2 hours. (It happens with all store-bought DVDs and all home-made DVDs.)

  Read the article

• Does the same lame settings (--alt-preset standard) have differrent names?

  - by erikric

  I've always used windows, and therefore EAC to rip my CDs, but since I've started using Ubuntu more often, I decided to try to rip some albums there. I ended up using k3b (since I found it in the Ubuntu Software center. Tried to install RubyRipper first, but when 'sudo apt-get install ' or UDC fails, a Windows user like me is lost) The real question here is about the settings for the lame encoder. I'm used to just writing --alt-preset standard, and everything works like a charm, but the default in k3b look like this: lame -r --bitwidth 16 --little-endian -s 44.1 -h --tt %t --ta %a --tl %m --ty %y --tc %c --tn %n - %f I assume these are some sensible lame settings, and not a malicious perl script (although it looks like it). It seems to me like some of these ought to be there, and that I can not overwrite the whole thing with my good ol' --alt-preset. So, the question is do I need to replace anything, or is -h the same as old --alt-preset? Is it a difference between '--preset standard' and '--alt-preset standard'? And are those the same as -V 2?

  Read the article

• How can I update generic non-pnp monitor?

  - by njk

  Background I've been running a KVM switch with my monitor at 1920 x 1080 over VGA for over a year. Did a Windows Update on 12/11/12 which did the following: Update for Windows 7 for x64-based Systems (KB2779562) Security Update for Windows 7 for x64-based Systems (KB2779030) Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2761465) Windows Malicious Software Removal Tool x64 - December 2012 (KB890830) Security Update for Windows 7 for x64-based Systems (KB2753842) Security Update for Windows 7 for x64-based Systems (KB2758857) Security Update for Windows 7 for x64-based Systems (KB2770660) After a restart, my extended monitor was dark. I attempted to reset the extended display configuration, and noticed my monitor was being detected as a Generic Non-PnP Monitor: I uninstalled, downloaded new, and re-installed display drivers. Nothing. I attempted to unplug my monitor from the power for 15 minutes. Nothing. I followed some of the suggestions on this thread; specifically DanM's which suggested to create a new *.inf file and replace that in Device Manager. Device Manager said the "best driver software for your device is already installed". The only thing that works is when the monitor is directly attached to the laptop. This obviously is not what I want. My thought is to somehow remove the Generic Non-PnP Monitor from registry. How would I accomplish this and would this help? Any other suggestions? Relevant Hardware ASUS VE276 Monitor TRENDnet 2-Port USB KVM Switch (TK-207K) HP Laptop w/ ATI Radeon HD 4200 Screens

  Read the article

• Local references to old server name remain after Windows 2003 server rename

  - by imagodei

  I have a standalone Win 2003 server with Windows Sharepoint Services (WSS3) running on it. I had to rename the server and I had bunch of problems resulting from this. Note that the server is not in AD environment. Most obvious problems were with Sharepoint, which didn't work. I was somewhat naive to think it will work in the first place, but OK - I've solved this using step 1 & 3 from this site (TNX) Other curious behavior/problems remain. Most disturbing is that Sharepoint isn't able to send email notifications to participants. I noticed there are several references to old server name everywhere I look: in Registry, in Windows Internal Database (MICROSOFT##SSEE). I see instances of old server name in the Sharepoint Central Administration - Operations - Servers in farm. There is reference to a servers: oldname.domain.local oldname.local On one of those servers there is also Windows SharePoint Services Outgoing E-Mail Service (Stopped). Also, when I try to telnet locally to the mail server (Simple Mail Transfer Protocol (SMTP) service), I get a response: 220 oldname.domain.local Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Tue, 15 Jun 2010 13:56:19 +0200 IMO these strange naming problems are also the reason why email notifications from within Sharepoint don't work. Can anyone tell me how to correct/replace those references to oldservername? Why is the email service insisting on old name? Of course I would like to try it without reinstalling the server. TNX!

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• How to create a init.d script for openssh-server which was compiled and installed from source using configure + make + make install?

  - by Patrick L

  I have installed openssh-server in my Ubuntu PC using apt-get install openssh-server. The version is 5.9. Now, I would like to compile and install openssh-server version 6.2 from source codes. I have successfully downloaded the source codes, and run the following commands: ./configure make make install I found that the new version of openssh-server was installed into /usr/local/sbin/. The old version of openssh-server is in /usr/sbin/. I found that the service script in /etc/init.d/ssh is still pointing to /usr/sbin/. And the old openssh-server (v5.9) is still running. How can I replace the old openssh-server with the new openssh-server that I have just compiled and installed? How can I create a init.d script to start and stop the new openssh-server that I've compiled from source manually? How to start the new openssh-server on boot? When I install openssh-server using apt-get install, the config files will be installed into /etc/ssh/. If I compile and install it from source, where is the config file? If I compiled openssh-server from source, but I install openssh-client package using apt-get install, will there be any config files conflict? Thanks.

  Read the article

• Interesting phenomenom with Windows Server 2008 R2 user access controls and NTFS ACLs

  - by Simon Catlin

  One to try, and I'd appreciate any thoughts on this. On a Windows Server 2008 R2 box (or presumably 2008 R1, Windows Vista or Windows 7): i) Logon as an administrator, and create a new NTFS volume ii) Blow away the standard MS ACLS on the root of the volume (which are laughable), and replace with Administrators:Full Control, System:Full Control, e.g.: echo Y|cacls.exe d:\ /g "Administrators:F" "SYSTEM:F" iii) Now, from a Command Prompt shell window or PowerShell window, switch to that drive (cd /d D:\ or set-location D:\ ). Works fine... no issues. iv) Now, try to browse to the root of the new volume using MS Explorer... Access denied. Now, I've kind of convinced myself that it is UAC getting in the way, as you can add "Authenticated Users:List" access to D:\ and Explorer then works. I can only assume that MS Explorer isn't able to use the "admin" token for the Administrator. Browsing to explorer.exe and doing a "Run as administrator" has no effect. Any thoughts? Cheers in advance.

  Read the article

• Route all wlan0 traffic over tun0

  - by Tuinslak

  I'm looking for a way to route all wlan0 traffic (tcp and udp) over tun0 (openvpn). However, all other traffic originating from the device itself should not be routed through tun0. I'm guessing this could be realized using iptables or route, but none of my options seem to work. # route add -net 0.0.0.0 gw 172.27.0.1 dev wlan0 SIOCADDRT: No such process Info: This is because the VPN server is not redundant, and wlan users are not really important. However, all services running on the device are fairly important and having a VPN virtual machine with no SLA on it is just a bad idea. Trying to minimize the odds of something going wrong. So setting the VPN server as default gateway is not really an option. I also want all wlan0 user to use the VPN server's IP address as external IP. Edit with the script provided: root@ft-genesi-xxx ~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.27.0.17 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.13.37.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 172.27.0.0 172.27.0.17 255.255.192.0 UG 0 0 0 tun0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 root@ft-genesi-xxx ~ # ./test.sh RTNETLINK answers: No such process root@ft-genesi-xxx ~ # cat test.sh #!/bin/sh IP=/sbin/ip # replace with the range of your wlan network, or use fwmark instead ${IP} rule add from 10.13.37.0/24 table from-wlan ${IP} route add default dev tun0 via 127.72.0.1 table from-wlan ${IP} route add 10.13.37.0/24 dev wlan0 table from-wlan

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >