Search Results

Search found 7529 results on 302 pages for 'replace'.

Page 216/302 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Driver issue for 7850 HD Diamond Windows 7

  - by Mr.Student

  I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

  Read the article

• Static noise in headphones

  - by John Murdoch

  I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

  Read the article

• Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

  - by Om Nom Nom

  I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

  Read the article

• Will restoring a cPanel account delete irrelevant mysql databases?

  - by user54625

  Long story short: I have many accounts in WHM, many domains. However, most of the MySQL databases for all the sites were created under one user, "admin" (let's say it's admin.com). I recently moved the admin.com account to another web server , and now I need to move it back. I would like to restore this account from a backup made by that web server. However, it only has 3 databases attached to that domain, while the server I'm moving it to has those 3 databases (old DBs that need to be replaced), PLUS all the other databases which are used by other accounts on the server. My question: if I restore the admin.com account, will it delete all the other databases on the account, or will it only replace the 3 DBs it has? I can't take any chances here to delete all those other DBs... If it WOULD delete all those other accounts, how would I go about restoring this account without losing the other data? An easy to way to resolve this situation would be to move the mysql owners to the proper accounts, but alas it doesn't seem that there is a way to do that via WHM.

  Read the article

• Why are SMART error rates going down?

  - by Jeff Shattock

  I have a hard drive that's part of a Linux software raid5 array. SMART has reported that its multi_zone_error_rate was 0, then 1, then 3. So I figured I better start backing up more frequently and prepare to replace the drive. Now, today, the multi_zone_error_rate of that very same drive is back down to 1. It seems that 2 errors unhappened while I wasn't looking. I've also seen simliar behaviour by inspecting the syslog on the server. Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 8 02:31:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 These are raw values, not the human-useful values that smartctl -a produces, but the behaviour is similar: error rates changing, then undoing the change. None of these are the drive that had the multi_zone weirdness. I haven't seen any problems from the RAID; its most recent scrub ( < 24 hours ago) came back totally clean. The only thing I can think of is that the SMART reporting circuitry on the drive isn't working properly all the time. The cables are in tight on the drive and board. What's going on here?

  Read the article

• What Wireless Router/ADSL Modem to get? N-band a must!!

  - by JJarava

  I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

  Read the article

• Windows 7 64-bit installation from alternative media (no DVD/USB Flash drive)

  - by Niels Willems

  Greetings I currently have Windows 7 x86 installed on my computer. I want to install Windows 7 x64 on a different partition on my computer. However there is a little issue, I cannot run the x64 install from Windows 7 x86 which I currently have. I was planning to Install Windows 7 x64 on another partition to then boot up from that partition to install it on the partition I actually want my OS on. Once that is complete I could just format the partition from the Windows 7 x64 that I didn't need anymore. But the installer will not run from the x86 version of Windows 7 even though I do not want to upgrade that Windows directly. The reason I'm doing this in such a weird way is that my optical drive is broken and I'm really not into buying a new one since I would use it like once every year or so. I also don't have a USB Flash Drive which is big enough to hold the installation files. As far as I'm aware I cannot use an external hard drive such as this one, which I do have. Are there any alternatives in which I can install Windows 7 x64 or am I forced into buying a USB Flash Drive or new optical drive? Thank you in advance for your replies. Edit: This picture shows my current partitions on my laptop. I want to get Windows 7 x64 on the C partition but have to install it first on the F partition to then boot up the F partition windows to format C and install x64 on that one. My external drive is J. Edit 2: No alternative computer which has a DVD drive, install files are located on an iso from MA3D. To install my 32 bit version I mounted the ISO in Daemon Tools to replace my Windows Vista but since I cannot run 64 bit into my 32 bit OS this doesn't work.

  Read the article

• Need to boot into chkdsk from USB on Windows netbook

  - by Gaz Davidson

  While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

  Read the article

• passing on command line options in bash

  - by bryan

  I have a question. I have a script, a kind of long script written in bash aprox. 370 lines. That has several functions and in those functions the user has to enter information which is then stored in files. ( This is suppose to represent a MySQL database, with the functions INSERT, UPDATE, SELECT, SELECT where x=y.) I created this myself in bash, now the only thing that rests me is that I need to be able to pass arguments on the command line to the script, that will do the same as the script does. I know that bash has positional parameters such as $1 $2 $3 $* $@ $0 ( refers to the name of the script) etc. I know how I can use these parameters in a simple if function. This is not enough for my script. I basicly need to do the same thing that the script does, but then from the command line. I have been struggling with this for a couple of days now and I cannot think of a way to get it to work. Maybe someone here can help me with this? If you want to have the script. That can be possible, but I don't think I can paste it in here... EDIT: Link to script, http://pastebin.com/Hd5VsDv2 Note, I am a beginner in bash scripting. EDIT: This is in reply to Answer 1. As I said I hope I can just replace the if [ "$1" = "one" ] ; then echo "found one" to if [ "$1" = "one" ] ; then echo SELECT where SELECT is the function I previously had in my script(above) http://pastebin.com/VFMkBL6g LINK to testing script

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• PhpMyAdmin Missing parameter:

  - by Ali

  Everything was working fine until this moment I want to create a new database and I'm receiving this error db_create.php: Missing parameter: new_db (FAQ 2.8) Also when I was trying to export my database I also receive the following error export.php: Missing parameter: what (FAQ 2.8) export.php: Missing parameter: export_type (FAQ 2.8) When I looked it FAQ 2.8 from the suggested link in PHPMYADMIN 2.8 I get "Missing parameters" errors, what can I do? Here are a few points to check: In config.inc.php, try to leave the $cfg['PmaAbsoluteUri'] directive empty. See also FAQ 4.7. Maybe you have a broken PHP installation or you need to upgrade your Zend Optimizer. See http://bugs.php.net/bug.php?id=31134. If you are using Hardened PHP with the ini directive varfilter.max_request_variables set to the default (200) or another low value, you could get this error if your table has a high number of columns. Adjust this setting accordingly. (Thanks to Klaus Dorninger for the hint). In the php.ini directive arg_separator.input, a value of ";" will cause this error. Replace it with "&;". If you are using Hardened-PHP, you might want to increase request limits. The directory specified in the php.ini directive session.save_path does not exist or is read-only. I did tried with php.ini to make sure that I've session.save_path = "/tmp" I'm using Mac Xserver and running with MAMP I did tried everything to restart my server and nothing help. Please if anyone help me to give me some suggestion. Apologize if I post in a wrong place.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• Why are Microsoft Windows Update taking so long to install?

  - by Mathieu Pagé

  Hi, I have a question that is not related to a problem I have. Just something I'd like to understand. Why are Windows update so long? First Windows Update need to find witch updates you needs and this take about 5 minutes. What is happening behind the scene during those 5 minutes? I would have tought that it would be enough to compare the updates you already have to the complete list of updates or to check the version numbers of a couples files. Then when it comes time to install the upgrades, they're also taking a long time. Some 1 Mb updates takes 2, 3 or 5 minutes to install. What is taking so long. I would have though that it was simply a mater of backup the old file, uncompress the new files, replace the old file. This should be really fast. Is Windows doing something else? For comparison, under Linux, you can find which updates you need in about 20 seconds and installing them is usually pretty fast (The time to uncompress the files). I can do a complete updgrade of my linux machine in about 25 minutes (download 600-800 Mb of updates, hundreds of them and install them) while under windows 25 minutes is the time it needs to find witch update are needed and install about 5-10 updates. I just updated a Windows XP home from SP1a to SP3 + all other updates. It took me more than 3 hours. Doing something like that in the Linux World takes about 30 minutes. I don't want to bash Microsoft here. I genuinly want to know what they do differently that makes it so long.

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless for requests coming from outside of my network. Accessing the router itself (admin UI) from outside is without any issues, no delay whatsoever. But when I try to access a service residing on any of the computers in my network from outside the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine, as does any 'inner' communication turning off firewall on target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• cron doesn't execute any task, but writes into log as executed

  - by FractalizeR

  I have strange problem on one of my servers. Cron does not execute any task, but it writes to it's log, that task has been executed successfully. Like some simulation mode is activated... Apr 30 03:03:08 nd-10049 crond[13387]: (root) CMD (php /usr/local/frb/backup.php) Apr 30 03:05:01 nd-10049 crond[13397]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php>/home/support/public_html/cron/hourly.log) Apr 30 03:09:01 nd-10049 crond[19108]: (root) CMD (/etc/webmin/cron/tempdelete.pl ) Apr 30 03:10:01 nd-10049 crond[19467]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php>/home/support/public_html/cron/hourly.log) Apr 30 03:14:44 nd-10049 crontab[21154]: (root) BEGIN EDIT (root) Apr 30 03:15:01 nd-10049 crond[21309]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php>/home/support/public_html/cron/hourly.log) Apr 30 03:15:38 nd-10049 crontab[21154]: (root) REPLACE (root) Apr 30 03:15:38 nd-10049 crontab[21154]: (root) END EDIT (root) Apr 30 03:16:01 nd-10049 crond[14961]: (root) RELOAD (cron/root) Apr 30 03:20:02 nd-10049 crond[22620]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php) There are no errors about cron in common log (messages). The OS is CentOS. What can I do to check what is the problem? What can the problem be?

  Read the article

• What is the latest on Microsoft Expressoin Studio licensing?

  - by DanM

  In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

  Read the article

• How flexible is the 'indirect' function?

  - by Chuck

  My curiosity pushes me to ask this question. If I were to have a series of functions that referenced a different column in a worksheet but all ended on the same row of data is there a way to point the 'row' part of a cell reference to a blank cell and use it has a variable to show the results of the functions up to a desired row simultaneously? Example: =Average('worksheet 1'.$A$1:'worksheet 1'.$A100) =Max('worksheet 1'.$B$1:'worksheet 1'.$B100) =Min('worksheet 1'.$C$1:'worksheet 1'.$C100) =Sum('worksheet 1'.$D$1:'worksheet 1'.$D100) Pseudo formulas... =Average('worksheet 1'.$A$1:'worksheet 1'.$A*('worksheet 2'.$A$1)*) =Max('worksheet 1'.$B$1:'worksheet 1'.$B*('worksheet 2'.$A$1)*) =Min('worksheet 1'.$C$1:'worksheet 1'.$C*('worksheet 2'.$A$1)*) =Sum('worksheet 1'.$D$1:'worksheet 1'.$D*('worksheet 2'.$A$1)*) Where 'worksheet 2'.$A$1 would only contain a number corresponding to a row in 'worksheet 1'. After stumbling upon and playing with the indirect() function I have only been able to replace the entire cell reference (Column and Row) with any success. The formula so far =SUM('worksheet 1'.C3:INDIRECT(A1)) Where A1 is on 'worksheet 2' and contains a full cell reference pointing to 'worksheet 1'. Any pointers?

  Read the article

• Is there any free software to check for issues with a DVD drive?

  - by AgentConundrum

  I don't usually play movies on my laptop (prefer the standalone with the tv), but I tried to watch one the other night, and noticed playback was really choppy and had audio artifacts in places. I thought it could be related to memory issues so I rebooted and tried again, but the results were the same. I considered that it could be an issue with the disc, so I tried to clean it but again there was no change. I don't think the problem is with the disc, because I tried another disc and it also had the same problem. I don't think I've ever watched the second disc since I've had it, so it should have been safe in its jewel case. Also, there were no issues when I watched an episode off the first disc in my standalone player. What I'm wondering is: are there are any (free) utilities that can check for issues with the drive itself? I looked around but most of the software I found focuses on integrity checks for the disc, not the drive. I have had issues with this laptop recently (had to replace the keyboard when the cat damaged it while I was cleaning dust out and the machine was ripped apart, also replaced part of the chassis after I cracked it when I tried to open it not knowing a screw was still in it) so I may have just replaced the drive incorrectly. I'm going to check on this while I await an answer to this question. Thanks.

  Read the article

• Mac Grey/White Screen of Death

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen. Update (18/05/10): I've been told that I could be getting the White/Grey screen of death because the optical flex cable is damaged (aparently this is common). Apparently the Optical Drive is part of the POST sequence, and an inability to read the drive can result in failure for the system to move on to other bootable volumes. More info here. I will disable the optical drive and see if that works.

  Read the article

• Managing ip6tables (or an alternative firewall) remotely

  - by Matthew Iselin

  I'm working with IPv6 and have run into an issue configuring ip6tables on our main router in order to control what can come into the network. A default DROP rule in the FORWARD section has worked well (obviously leaving ESTABLISHED,RELATED as ACCEPT) to keep internal clients' open ports from being accessed. However, running an ip6tables command for every little change is unwieldy. Whilst we are able to continue creating rules manually, I'm wondering if there's some sort of management interface we could use to create the rules quickly and easily. We're looking to be able to save time working on our firewall as well as providing a simple method for modifying rules for those who will eventually replace us. I know webmin (heavily locked down on our network, naturally) has support for modifying iptables rules, but seemingly no support for ip6tables. Something similar would be fantastic. Alternatively, suggestions for a firewall solution apart from iptables/ip6tables which can be managed remotely wouldn't be out of order. A web interface for management is certainly preferable, even if it is just a wrapper with shiny buttons over the raw config files.

  Read the article

• Server 2003 Terminal Services Printers not redirecting, no sessions created.

  - by mikerdz

  Ok, odd scenario on a Windows Server 2003 Server Standard running as Terminal Server. Friday, installed 2 new Windows 7 machines to replace older XP machines. After adding these machines and their local printers, none of the otehr 16 Windows 7 machines can redirect printing to the server. I have checked Global Policy on domain controller, nothing is being blocked. In Terminal Services Manager, the client settings are set to User Client Settings. On RDP client, port redirection is enabled. I have tried disabling the Use Client Settings option and manually selected the options for print redirection and default printer connection, but still does not work. After some reaserching, I found this MS article: http://support.microsoft.com/kb/2492632 I went ahead and added the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\fEnablePrintRDR DWORD that the article references and set it to "1" to enable the option. I restarted the server, but still would not print. I am getting quite desperate with this issue because nothing seems to have changed when installing the two new clients and printers. I uninstalled the print drivers for the printers from the server. I have even gone as far as connecting each of the printers manually via UPD (\computername\printer) but even thought it works, it prints awfully slow. Please help!!!!

  Read the article

• Sluggish Windows SBS 2003

  - by TomWilsonFL

  One of my customers has a Windows 2003 Small Business Server which at this point is basically the DC, DNS, Fileserver and Symantec Protection Manager. I have disabled Exchange because I moved their mail to Google Apps. The server is extremely sluggish when doing anything. It is most noticeable when a dialog box is open (say the System properties), and you try to change tabs. This is usually instant, but on this machine can take 3-5 seconds. What additional services / packages can I uninstall from this machine knowing that it is only performing the above roles? Will removing the "Small Business Server" package in Add / Remove Programs get rid of a few unnecessary things? Any other thoughts? P.S. I know Symantec Endpoint and the Protection Manager are hogs, but I have nothing to replace the solution with at the moment. Thanks, Tom UPDATE: I looked over the different performance metrics, but nothing stood out as a problem. One of my friends mentioned Symantec's log and temp files can get quite huge and slow things down, so I ran CCleaner on the machine and found close to 3 GB of Symantec "stuff." Removed that and now the machine is MUCH better. I am still unsure why the data just sitting there would cause such a slowdown. The drive is not even near full. The only thing I can imagine is that Symantec must have to run through this stuff now and then.

  Read the article

• Simple options for port forwarding to a different port?

  - by Nick

  I have three network printers at our local office, all of which listen on port 9100. Non of them offer the option of changing the listening port. We have a single public static IP address, and access to our main network is through a Linksys WRT-54G. We need to be able to print to these printers from outside the office. The problem is, with the 54G, I can only forward a port to the SAME port on a particular IP address. What I really need though is a way to forward to an ip address and a DIFFERENT port. I need to do this: In port Destination 9100 192.168.1.1 : 9100 9101 192.168.1.2 : 9100 9102 192.168.1.3 : 9100 So I'm looking for options. I could setup an old computer with two network cards and IPtables I suppose, but that seems like a lot of overhead for something relatively simple. Is there a way a virtual machine (read: one network card) could do the advanced port forwarding? Where I forward all traffic to it, and it forwards it on to the right printer? Or what about those mini Linux distros that replace the WRT-54G's firmware? Do any of those support what I need "out of the box"? I have a spare WRT- could I make it an IP tables router? Recommendations for mini distros? Or is there an off-the-shelf product that does this (cheap/local preferred)? Any advice / options appreciated. Thanks!

  Read the article

• Is it possible/practical to install and run Linux on a USB flash drive?

  - by Graeme Donaldson

  I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

  Read the article

• what is the fastest way to copy all data to a new larger hard drive?

  - by SUPER user

  I was certain this would have been covered before, but I cannot find an answer amongst all the almost-duplicates that come up; sorry if I've missed something obvious. I have a full 320gb disk inside my machine, a new 1tb disk to replace it, and a USB 2.0 chassis. It is only data on a single partition, no OS/apps involved, and the old drive will be kept somewhere as backup (no secure wiping etc). The simple option would be to put new disk in USB chassis, copy files, then swap them over. But for USB pen drives, reading is around 4x faster than writing. If the same is true for a USB SATA chassis (is it?) then it would be significantly faster to swap the drives first and read from the old drive over USB, right? Then the other consideration is that copying lots of files is usually slower than a single file of equivalent size. Is Windows 7 smart enough to do everything in a single lump like that, or is there specialised software that should be used instead? (Even if SATA-SATA copying is faster than involving USB, knowing what to do when it isn't an option is useful information.) Summary: Does a USB SATA chassis suffer from a read/write inequality? (like a USB pen drive does, but unlike a direct SATA connection) Can Windows 7 do sequential access? (I can't find confirmation if Robocopy does this.) Or is it necessary to use a bootable CD/USB with something like Clonezilla to achieve sequential copy speeds?

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >