Search Results

Search found 7529 results on 302 pages for 'replace'.

Page 219/302 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• What precautions should I take once defective RAM has been replaced?

  - by DustByte

  I recently discovered that my RAM is faulty (MemTest86+). I am waiting for new RAM to be sent to me.  It was through sheer luck that I discovered something was wrong. I was copying a large amount of big files and decided to verify the copies by their checksums. I discovered strange discrepancies, and noticed that checksum computation for the same file was not consistent. Now, this is the only problem I have encountered; no BSOD, no crashes, no errors. In a sense this makes me more worried than if I would have had massive crashes. I have no idea for how long the RAM has been faulty, and I have no idea if corrupt bits have been saved into files on my hard drives. I do know the RAM was fine two months ago (tested it back then). I am a user of Adobe's Lightroom and I am worried that photos or the catalog itself could carry corrupt data. Question: what should I do once new healthy RAM has been installed? Reinstall Windows (I'm using Windows 7, 64 bit)? Is there a risk that I will be presented with nasty surprises in the future if I don't? What about personal files? I have backups of some of the files but for newer files I'm not sure I can even trust the backups. It's going to take me many hard hours to manually replace files with older versions, or compare checksums.

  Read the article

• Configure php mail() on Windows/IIS

  - by Adam Tuttle

  I have a Windows Server 2003 / IIS web server running various application servers, and ended up begrudgingly adding PHP into the mix. I know Win/IIS isn't the ideal environment for PHP, but it's what I've got and I need to make it work. From phpinfo(): Configuration File (php.ini) Path: C:\WINDOWS Loaded Configuration File: C:\php\php.ini From C:\php\php.ini: [mail function] ; For Win32 only. SMTP = localhost smtp_port = 25 ; For Win32 only. ;sendmail_from = [email protected] ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ;sendmail_path = ; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_parameters = Lastly, I have IIS setup to run an SMTP relay that allows connection and relay, but only from localhost. But when I try something that uses mail(), I get this error: The e-mail could not be sent. Possible reason: your host may have disabled the mail() function... Any ideas?

  Read the article

• Reconnecting OST with Exchange

  - by syrenity

  Hi. I have a quite big problem with customer's MS Exchange. The server got it's disk filled about 2 weeks ago, so it's currently offline. They plan to upgrade it, but not in hurry, as they use it mainly for OWA and back-up - the mails exchange is done via SMTP and POP3. Trying to diagnose some problem today, one of the users has (following the ISP instructions), removed the Exchange account from Outlook, which essentially left the OST orphaned. The user naturally didn't move the emails or any other data to the Archive / PST before, so these emails located on the OST only. So currently I'm trying to figure out how to restore them. There are 2 options: 1) Make the user buy some tool to convert them to PST, and import as archive / main Outlok file? 2) Reconnect the Outlook to Exchange (once it up), let it sync the old server content, then shutdown Outlook and replace the new OST with the old one, start Outlook again in offline mode and move these files to archive. 3) Any other method? Can someone advice what would be the best approach here? The used versions are Outlook 2007 and Exchange 2003. Thanks!

  Read the article

• mshtml.dll latest version for Internet Explorer 8, Windows XP Service Pack 3

  - by AllSolutions

  Many applications in my system (Internet Explorer 8, Yahoo Messenger, Skype 10) are crashing and error details shows module name mshtml.dll. I checked the version of mshtml.dll in system32 folder. It is 8.0.6001.19170. My Internet Explorer version is 8.0.6001.18702. I am not concerned about crash of IE, because I generally use Firefox, but how do I solve the crashes in other applications, which are due to mshtml.dll? I have moved to Windows XP Service Pack 3 (32 bit). I have tried to update Internet Explorer 8 (from Tools-Windows Update), but again it crashes. I can not migrate to IE 9, as it requires Vista or Windows 7. I have applied Cumulative Security update for IE8, which has this file name: IE8-WindowsXP-KB2618444-x86-ENU.exe I could not get much info from Microsoft sites or Google. I do not want to use Automatic Updates feature of Windows. Can somebody give the download links for mshtml.dll and any associated files, which I can replace in system32 folder? Thanks.

  Read the article

• Computer does not boot after ram upgrade

  - by Calmarius

  I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

  Read the article

• raid 0 data recovery?

  - by Fred

  HI All, I have two identical seagate 7200.9 500Gb drives confiured as a RAID 0 spanned disk in windows. One of the drives has lost power and wont spin up at all. I know this normally means death for the data on both drives but i have a cunning plan.. DISK 1 - NO POWER RAID 0 DISK DISK 2 - FULLY FUNCTIONAL RAID 0 DISK DISK 3 - FULLY FUNCTIONAL SPARE DISK Copy the working drive (disk 2) data to a third 500GB DISK (disk 3), remove the logic board from the working disk (disk 2) and replace it with the non working logic board on the broken drive (disk 1) , then hopefully recreate the RAID 0 with disk 1 and disk 3, just long enough to get the data off it. Hope this makes sense, here are my questions: Windows disk manager atm recognises disk 2 but wont let me access it in anyway, therefore copying the data off it (or getting a disk image) cant be done in windows. Does anyone know of any software (in linux or self booting) that would allow me to access this disk? Anyone know of any software that will recreate the spanned drive off two disk images Am i missing any key information that means i definitely shouldn't even bother starting this, i know its a long shot anyway but its worth a try unless i definitely cant do it. The irritating thing is that i am sure its a logic board failure on disk 1 as it simply wont power up at all, suddenly no signs of life, so i am sure the data is intact! Any help would be really appreciated! Thanks

  Read the article

• How to create a init.d script for openssh-server which was compiled and installed from source using configure + make + make install?

  - by Patrick L

  I have installed openssh-server in my Ubuntu PC using apt-get install openssh-server. The version is 5.9. Now, I would like to compile and install openssh-server version 6.2 from source codes. I have successfully downloaded the source codes, and run the following commands: ./configure make make install I found that the new version of openssh-server was installed into /usr/local/sbin/. The old version of openssh-server is in /usr/sbin/. I found that the service script in /etc/init.d/ssh is still pointing to /usr/sbin/. And the old openssh-server (v5.9) is still running. How can I replace the old openssh-server with the new openssh-server that I have just compiled and installed? How can I create a init.d script to start and stop the new openssh-server that I've compiled from source manually? How to start the new openssh-server on boot? When I install openssh-server using apt-get install, the config files will be installed into /etc/ssh/. If I compile and install it from source, where is the config file? If I compiled openssh-server from source, but I install openssh-client package using apt-get install, will there be any config files conflict? Thanks.

  Read the article

• Dual pane file manager for Mac OS X

  - by Alex Kaushovik

  Is there a good customizable dual-pane file manager for Mac like Total Commander / Far Manager in Windows, or like Krusader / Midnight Commander in Linux? I used to work on Windows for quite a while and mostly used Far Manager and sometimes Total Commander, then I switched to Ubuntu Linux and used Krusader, now I switched to Mac OS (Snow Leopard) and I'm having a hard time trying to find a good file manager... Many of the existing applications are trying to replace the Finder with "multimedia capabilities nobody cares about in file manager - IMHO" (Path Finder, ForkLift), some of them are almost good dual-pane file managers (couldn't remember examples), but none of them worked for me mostly because of one reason: I couldn't integrate my file/folder comparison utility (Araxis Merge for Mac) with them... The way it worked for me in Windows and Linux is that I was setting the cursor on one file in the left pane, then setting the right-pane cursor on another file in right pane, then I pressed a hotkey that launched Araxis Merge with those to files/folders comparison results. It was very easy to set up in Far Manager (Windows) and Krusader (Linux, actually in Linux I used "Meld" instead of Araxis Merge...) The tool I'm looking for doesn't necessarily has to be free... Thank you!

  Read the article

• Getting rid of your server in a small business environment

  - by andygeers

  In a small business environment, is it still necessary to have a central server? Speaking for my own company (a small charity with about 12 employees) we use our server (Windows Server 2003) for the following: Email via Microsoft Exchange Central storage Acting as a print server User authentication / Active Directory There are significant costs associated with running a server like this: Electricity, first for the server itself then for the air conditioning required (this thing pumps out a lot of heat) Noise (of which there is a lot) IT support bills (both Windows Server and Exchange are pretty complicated, and there are many ways they can go wrong) I've found ways to replace many of these functions with cheaper (better?) alternatives: Google Apps / GMail is a clear win for us: we have so many spam related problems it's not even funny, and Outlook is dog slow on our aging computers You can buy networked storage devices with built in print servers, such as the Netgear ReadyNAS™ RND4210 that would allow us to store/share all of our documents, and allow us to access printers over the network The only thing that I can't figure out how to do away with is the authentication side of things - it seems to me that if we got rid of our server, you'd essentially have a bunch of independent PCs that had no shared pool of user accounts / no central administrator. Is that right? Does that matter? Am I missing any other good reasons to keep a central server? Does anybody know of any good, cost-effective ways of achieving the same end but without the expensive central server?

  Read the article

• Sudden and frequent hangs on desktop computer: mobo or CPU fault?

  - by djechelon

  I have a desktop computer equipped with an ASUS Crosshair 2 Formula and a Phenom x6 3.2GHz CPU. My problem is that often the computer will hang all of a sudden, completely stopping responding. When that occurs, reset key is inoperative and power button turns the computer off but is unable to turn it back on. I have to physically disconnect power cable. The problem can occur anytime, when I'm booting Windows, when I'm logging in, when I'm listening to a song, when I'm browsing Internet, etc. It always occurs after very few minutes of 3D gameplay I thought it was a video card fault. I had 3 8800GTX so I could try all combinations of them: didn't fix I thought it was a RAM problem: I tried running with only a subset of my DDR2 banks but didn't fix. Almost every time I have to reset and reconfigure BIOS (without AHCI, Win7 won't boot, so I need to restore a few things). If I enable AMD Live, Cool&Quiet or other things from CPU configuration menu I'll be sure that the computer won't reach Windows desktop in 99% of cases (it randomly hangs somewhere in the boot process or even in the BIOS POST). Another interesting thing is that during the POST process the computer always takes unusually long time detecting USB devices (LCD POSTer shows USB INIT), and I've also tried disconnecting all USB devices but didn't take less time to POST BIOS revision is 2702, the latest. Today I found a different behaviour once: during boot screen I got a BSOD with error Stop 0x00000101 A clock interrupt was not received on a secondary processor within the allocated time interval, and this is usually related to overclocking, but I never overclocked my CPU. Judging from the description of my problem, hoping someone had the same and fixed, and since I don't have a spare CPU or motherboard for replacement, I'd like to ask if you think this is a problem with faulty CPU or faulty motherboard, and if I can perform additional tests (I mean software tests because of my lack of spare components) to identify the component to replace.

  Read the article

• Interesting phenomenom with Windows Server 2008 R2 user access controls and NTFS ACLs

  - by Simon Catlin

  One to try, and I'd appreciate any thoughts on this. On a Windows Server 2008 R2 box (or presumably 2008 R1, Windows Vista or Windows 7): i) Logon as an administrator, and create a new NTFS volume ii) Blow away the standard MS ACLS on the root of the volume (which are laughable), and replace with Administrators:Full Control, System:Full Control, e.g.: echo Y|cacls.exe d:\ /g "Administrators:F" "SYSTEM:F" iii) Now, from a Command Prompt shell window or PowerShell window, switch to that drive (cd /d D:\ or set-location D:\ ). Works fine... no issues. iv) Now, try to browse to the root of the new volume using MS Explorer... Access denied. Now, I've kind of convinced myself that it is UAC getting in the way, as you can add "Authenticated Users:List" access to D:\ and Explorer then works. I can only assume that MS Explorer isn't able to use the "admin" token for the Administrator. Browsing to explorer.exe and doing a "Run as administrator" has no effect. Any thoughts? Cheers in advance.

  Read the article

• Route all wlan0 traffic over tun0

  - by Tuinslak

  I'm looking for a way to route all wlan0 traffic (tcp and udp) over tun0 (openvpn). However, all other traffic originating from the device itself should not be routed through tun0. I'm guessing this could be realized using iptables or route, but none of my options seem to work. # route add -net 0.0.0.0 gw 172.27.0.1 dev wlan0 SIOCADDRT: No such process Info: This is because the VPN server is not redundant, and wlan users are not really important. However, all services running on the device are fairly important and having a VPN virtual machine with no SLA on it is just a bad idea. Trying to minimize the odds of something going wrong. So setting the VPN server as default gateway is not really an option. I also want all wlan0 user to use the VPN server's IP address as external IP. Edit with the script provided: root@ft-genesi-xxx ~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.27.0.17 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.13.37.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 172.27.0.0 172.27.0.17 255.255.192.0 UG 0 0 0 tun0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 root@ft-genesi-xxx ~ # ./test.sh RTNETLINK answers: No such process root@ft-genesi-xxx ~ # cat test.sh #!/bin/sh IP=/sbin/ip # replace with the range of your wlan network, or use fwmark instead ${IP} rule add from 10.13.37.0/24 table from-wlan ${IP} route add default dev tun0 via 127.72.0.1 table from-wlan ${IP} route add 10.13.37.0/24 dev wlan0 table from-wlan

  Read the article

• windows 95 virtualization and CPU idle

  - by brtlvrs

  We are in the situation that we need to migrate our windows 95 systems (i know, that is so last century ). There is no hardware for a reasonable price available to run our windows 95 systems. So we are extending the overdue lifetime of it, by making them virtual. Now we see that VMware reports 100% CPU utilization of a windows 95 VM. This is because windows 95 doesn't know how to manage a CPU. For this reason software like rain or Waterfall, or CPUCool are introduced. The they are sending a HLT instruction to the CPU. This causes the CPU to halt and wait for new triggers to work. I've tested the mentioned programs in the VM, but they don't work, but generate errors. anyone has a valid workaround, solution ?? btw. I know that the best solutiuon is to replace the windows95 with windows XP. But in our situation that will take at least 5 years. Our windows 95 systems are running factory process control software.....

  Read the article

• Dropped WD External Harddisk, now it's shown as "Not initialized"

  - by Phelios

  So, the WD my passport external harddisk is dropped, and after that, the computer is unable to read it anymore. I was hopping if I can just find another case to try if the harddisk is still readable, but looks like the hard drive itself is not a normal SATA or PATA drive. I think it's modified. So, I can't find another case that I can try on. In the computer, I still can see the drive in the "Disk Management", but it's shown as Uninitialized, no size, and no drive letter. I've also tried a couple of recovery tools. Some can't detect at all, there is one (find and mount software) that can detect but shows 0 size. None of them can recover the data. WD is willing to replace it with a new one, but I still need to recover the data. Any way I can recover the data? UPDATE: I tried initialized it from the windows Disk Manager, but it give error "The request could not be performed because of an I/O device error."

  Read the article

• Debian Stable: Can't update kernel, libc won't update.

  - by pascal

  I use Debian Stable (squeeze) on a virtual host where I can't touch the kernel, it's stuck (and will be for some time as support told me) at Linux 2.6.18-028stab070.3 #1 SMP Wed Jul 21 18:33:27 MSD 2010 x86_64 So when I try to update, several packages fail with FATAL: kernel too old for example Preparing to replace libgcc1 1:4.6.0-11 (using .../libgcc1_1%3a4.6.1-1_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.1-1) ... FATAL: kernel too old Segmentation fault dpkg: error processing libgcc1 (--configure): subprocess installed post-installation script returned error exit status 139 and some version chaos ensued: The following packages have unmet dependencies: libc-dev-bin : Depends: libc6 (> 2.13) but 2.11.2-13 is installed libc6 : Depends: libc-bin (= 2.11.2-13) but 2.13-5 is installed libc6-dev : Depends: libc6 (= 2.13-5) but 2.11.2-13 is installed libquadmath0 : Depends: gcc-4.6-base (= 4.6.0-2) but 4.6.0-11 is installed libstdc++6 : Depends: gcc-4.6-base (= 4.6.0-2) but 4.6.0-11 is installed locales : Depends: glibc-2.13-1 What should I do? I want to keep the system up-to-date, so I want to pin as few packets as possible, but I also don't want to have to compile anything manually. Trying to pin the status quo and figured out where the error came from: ldconfig segfaults. -v doesn't print anything more so I can't tell what's the actual problem. # ldconfig FATAL: kernel too old

  Read the article

• Does this mean the router is faulty?

  - by Ashfame

  I have a router to which I have my desktop (running Ubuntu) connected via LAN & I use it on my phone via wifi. Sometimes it happen that the LAN one will stop working for no reason but the wifi will work fine. And it will resolve away by itself. Since last night, the router was restarting again & again on its own, so I lodged a complaint about it and they said the router is faulty and will be replaced, but I know they don't know anything about how things work & is just going to shoot an arrow in the dark. These restarts has happened for the first time, LAN-wifi issue described earlier is a common one (but not frequent one). So is the router faulty or there is some issue from my ISP side which will continue to persist even after they change the router? My very best guess is that they will replace it with an older refurbished router which will tend to give me more troubles in the coming time, so its better if I change it only its faulty (this is a new one - 6months old, I am its first hand user). I am happy to provide any details.

  Read the article

• How can I get web pages from sub.a.com using url sub.b.com?

  - by Steven

  I have developed www.mysite.com. This site can be "integrated" into my partners website. What I do is to create partner1.mysite.com and repalce my header and footer with my partners header and footer and replace some CSS styling. This should make it as transaprent as possible for the user, so that they think they are still browsing my partners website. There are two ways I see how I can accomplish this: 1. My partner uses an IFrame to show the content from partner1.mysite.com 2. My partner creates sub domain and points it to my sub domain. Solution 1 is easy, but I'm not sure how search engines likes this, so I will try solution 2. QUESTION Can I use mysite.partner1.com but read content from partner1.mysite.com? I don't want to forward / redirect users to partner1.mysite.com. It's important that the URL is mysite.partner1.com / mysite.partner1.com/some/page. Is this possible? For testing, I have Apache configuration more or less like this: NameVirtualHost 10.0.0.17 <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/mysite/ ServerName mysite.com </VirtualHost> <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/mysite/ ServerName site1.mysite.com </VirtualHost> // Since this is on my localhost, I also configure site1 here <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/site1/ ServerName site1.com </VirtualHost> <VirtualHost 10.0.0.17> ServerName mysite.site1.com --> DO SOME SORT OF FORWARDING HERE <-- </VirtualHost>

  Read the article

• Missing whole disk device in OpenSolaris

  - by Jeff Mc

  I have begun experimenting with Solaris and ZFS as a NAS. All was going very smoothly until I had a drive failure. When I replaced the drive, I no longer have a device file mapped to the whole disk. /dev/dsk/c7t3d0 does not exist but c7t2d0 and c7t4d0 both do. Also the sd@3,0:wd file under the /devices/ tree is non-existent. Do I have to prepare/partition the disk somehow to cause the whole disk device to exist? Here are a few outputs that might be useful. jeffmc@ats-ds2:/dev/dsk$ zpool status pool: datapool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: none requested config: NAME STATE READ WRITE CKSUM datapool DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 UNAVAIL 0 0 0 cannot open mirror-1 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 jeffmc@ats-ds2:/dev/dsk$ zpool replace datapool c7t3d0 cannot open 'c7t3d0': no such device in /dev/dsk must be a full path or shorthand device name jeffmc@ats-ds2:/dev/dsk$ sudo format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@0,0 1. c7t1d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@1,0 2. c7t2d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@2,0 3. c7t3d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@3,0 4. c7t4d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@4,0 5. c7t5d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@5,0

  Read the article

• Production deployment to EC2 with minimal downtime

  - by jensendarren

  I have a simple web application deployed on a large instance with EC2. I now want to deploy the latest code to this server but I want to do this in a way which minimizes downtime and is a smooth as possible for the end user. Here is my plan: Fire up another large instance Install all the software layers on that instance Restore and attach an EBS drive to the instance Deploy our latest production ready code on the new instance Run all tests (including manual testing of the application) (If tests pass) Put a "Site Under Maintenance" notice on the live site. Backup the EBS instance on the live site Detach the EBS instance from the new server and replace with the latest backup Use ec2-associate-address to move the IP address to the new instance Sit back and wait for traffic to start flowing though the new instance Terminate the old instance Does this seem like a good strategy? Are there any tutorials or books that might cover this topic? I have already read Cloud Application Architectures by George Reese, which is an excellent book, but does not cover deployment. Additionally, I know that there are tools that can help with this like RightScale or enStratus which I will use when I start using more than one instance.

  Read the article

• EventID 1058 Code 5, Sysvol is subdir of Sysvol - how to fix?

  - by nulliusinverba

  I have been trying to resolve this error, like many others: The processing of Group Policy failed. Windows attempted to read the file \domain.local\SysVol\domain.local\Policies{3EF90CE1-6908-44EC-A750-F0BA70548600}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following: a) Name Resolution/Network Connectivity to the current domain controller. b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller). c) The Distributed File System (DFS) client has been disabled. Error code: 5 = Access Denied. The incredibly helpful post is this one (http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/A_1073-Diagnosing-and-repairing-Events-1030-and-1058.html). Quoting from this post: HERE IS A LIST OF POTENTIAL PROBLEMS THAT CAN LEAD TO 1030 AND 1058 EVENT ERRORS: --Sometimes the permissions of the file folders that contain Group policies (the Sysvol folder) can be corrupted. --Sometimes you have problems with NetBIOS: --Sometimes the GPO itself is corrupt, or you have a partial set of data for that GPO. --Sometimes you may have problems with File Replication Services, which almost always indicates a problem with DNS --Sysvol may be a subfolder of itself: Sysvol/Sysvol I have the problem listed where sysvol is a subfolder of sysvol. The directory structure is: -sysvol -domain -staging -staging areas -sysvol (shared as "\\server\sysvol") -domain.local -ClientAgent -Policies -scripts Interestingly, the second sysvol folder is the one that is shared as "\server\sysvol". This makes me confident this is the issue with the permissions and error code 5. Also interestingly, my server 2008 R2 servers can see it fine - my server 2008 servers cannot, and get the error. This is consistent across all my servers. This latter fact makes me uncertain what I need to do to fix this up. Do I, e.g., simply move the shared sysvol folder up a level to replace the non-shared one? Any help greatly appreciated. Cheers, Tim.

  Read the article

• ATI firepro will not detect a second DVI-D monitor

  - by John

  OK so weird issue here. I have previously been running 6 screens off of 3 of the older ATI firepro graphics cards but they had a problem with the heat sink getting too hot and warping the PCB resulting in total failure of the card, to replace my three dead cards I purchased a new-type ATI firepro with the newer heat sink design. I'm only using one at the moment to make sure they've fixed the problem before I waste more money on 2 more cards but this is where things start to get weird. The Firepro's only have one port on them, they connect to two monitors via a splitter cable going from the one port to two DVI connectors for the screens. When I plug two identical monitors in via their DVI inputs not matter what I do windows and Catalyst will only detect one screen. However if I use the VGA input on one of the screens with a VGA - DVI adaptor to plug it in to the card it works fine. This confuses me greatly. I'm currently using the ATI Firepro 2270 Graphics card with identical DELL U2311H screens. I can post the rest of the system spec as well if needed but I wouldn't have thought it would make much difference as it had no problem handling 6 screens before the graphics cards failed. Naturally both catalyst and ATI drivers are the most current version. ATI tech support has been absolutely zero help, they seemed to get stumped as soon as I verified that both screens were plugged in and connected properly. Anyone have any ideas?

  Read the article

• Exchange 2007 - Mailbox Database Recovery

  - by Phrontiste

  Exchange 2007 edb Can we restore Exchange edb (First storage group\mailbox database.edb) to another exchange server ? Do I just copy the edb to the new exchange server and delete the first storage group\mailbox database.edb and replace it with this one ? How can I get all the mailboxes from that (old) mailbox database.edb ? I had a exchange 2007 server with 10 mailboxes, I have installed exchange on another machine and was thinking if I can do the above ? or is there any way I can get all the mailboxes from that edb (old mailbox database) and import them into the new one. I have deleted the old exchange install I had (these are test machines) What are the steps required to get the DB working on the new machine ? Also, I am confused about the recovery storage group ? I can mount a mailbox database in recovery storage group, but when I try to get mailbox out of it, it won't match any thing ? can someone please assist in understanding RSG and how to restore the OLD mailbox database. thanks and regards Phrontiste

  Read the article

• How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

  - by Boris Okun

  The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

  Read the article

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• how to rewrite '%25' in url

  - by nn4l

  My website software replaces space characters with '+' characters in the URL, A proper link would look like 'http://www.schirmacher.de/display/INFO/How+to+reattach+a+disk+to+XenServer' for example. Some websites link to that article but somehow their embedded editor can't handle the encoding, so what I see in the httpd log files is actually GET /display/INFO/How%2525252bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer which of course leads to a 404 error. It seems that the '+' character is encoded as '%2b' and then the '%' character is encoded as '%25' - several times. Since there are many such references to different pages from different websites, I would like to rewrite the url so that the visitors get the correct page. Here's my attempt which does not work: RewriteRule ^(.*)%25(.*)$ $1%$2 [R=301] What it is supposed to do is: take everything before the %25 string and everything after it, concat those strings with a '%' in between, then redirect. With the example input URL the rule should rewrite to /display/INFO/How%25252bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer followed by a redirect, then it should rewrite to /display/INFO/How%252bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer and again to /display/INFO/How%2bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer and so on. Finally, after a lot of redirects I should have left /display/INFO/How%2bto%2breattach%2ba%2bdisk%2bto%2bXenServer which is a valid url equivalent to /display/INFO/How+to+reattach+a+disk+to+XenServer. My problem is that the expression does not match at all, so it does not even replace a single occurrence of %25. I understand that there is a limit in the number of redirects and I should really use the [N] flag however I don't even get the first step right.

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >