Search Results

Search found 7936 results on 318 pages for 'kernel modules'.

Page 219/318 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

  • What could be causing frequent display freezes?

    - by austen
    I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

    Read the article

  • CodePlex Daily Summary for Saturday, June 07, 2014

    CodePlex Daily Summary for Saturday, June 07, 2014Popular ReleasesSFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedcsv2xlsx: Source code: Source code of applicationFamily Tree Analyzer: Version 4.0.0.0-beta5: This major release introduces a significant new feature the ability to search the UK Ordnance Survey 50k Gazetteer for small placenames that often don't appear on a modern Google Map. This means significant numbers of locations that were previously not found by Google Geocoding will now be found by using OS Geocoding. In addition I've added support for loading the Scottish 1930 Parish boundary maps, whilst slightly different from the parish boundaries in use in the 1800s that are familiar to...TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....ConEmu - Windows console with tabs: ConEmu 140602 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...New Projects.NET Extended Framework: .NET Extended FrameworkActivity Diagram: This is an attempt to parse C# Operation source and convert them into UML Activity Diagrams. The development of a suitable diagram editor is the next priorityBango Payment Flow in-app payments: Bango Payment Flow in-app paymentsDeckEditor: ?????????????????????????????????。 ?????????、CSV????、???????????。demodjango: just a demo project to record how to using djangoExport Bugs: This application will export all the bugs in a current project from TFS. It also has the option to export all attachments in the current projectFantom - Expression Based Dynamic Language Manager: Easy Dynamic Language (over MSSQL) Management for Asp.Net Web Forms. Very easy create dynamic multi language Asp.Net web site.JIRAShell: Provides PowerShell cmdlets for working with JIRA.PipeUtil: PipeUtil is a library that simplifies use the feature PIPE windows. Has the capability of client and server with threads support.Post Deployment Smoke Tester: This tool enables you to easily carry out post deployment smoke tests against your installed deployments to determine if your environment is in a good state.Quan Ly Dang Ki Internet: quan ly dang ki internetToolKD: ToolKD console application designed to change the binary code for directories that are used KitchenDraw program. Wiki Parsing Service: A web service to Parse wiki mark-up to HTML and vice versaXBee-API for .NET: This is .NET library for communication with XBee/XBee-Pro series 1 (IEEE 802.15.4) and series 2 (ZB/ZigBee Pro) OEM RF Modules. XPinterest: XPinterestZSoft-CMS: the project is going to use a new approach other than regular modular cms es.

    Read the article

  • Cannot login in account with encrypted home after update from 11.04 to 11.10

    - by martin
    After upgrading from ubuntu 11.04 to 10.10 I cannot access my encrypted home partition anymore. I can login, however all data stays encrypted. ecryptfs-mount-private gives: ERROR: Encrypted private directory is not setup properly Any idea how to fix this? Update I have several kernels installed (after the upgrade my menu.lst looks like this: http://paste.org/pastebin/view/35591) the problem is the same for all kernels. Booting from 2.6.32-27-generic and adduser --encrypt-home tes gives: Adding user `tes' ... Adding new group `tes' (1008) ... Adding new user `tes' (1007) with group `tes' ... Creating home directory `/home/tes' ... Setting up encryption ... ************************************************************************ YOU SHOULD RECORD YOUR MOUNT PASSPHRASE AND STORE IT IN A SAFE LOCATION. ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase THIS WILL BE REQUIRED IF YOU NEED TO RECOVER YOUR DATA AT A LATER TIME. ************************************************************************ Error: Your kernel does not support filename encryption ERROR: Could not add passphrase to the current keyring adduser: `/usr/bin/ecryptfs-setup-private -b -u tes' returned error code 1. Exiting.

    Read the article

  • How do I re-enable the backlight?

    - by Scott Severance
    Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

    Read the article

  • Restrictive routing best practices for Google App Engine with python?

    - by Aleksandr Makov
    Say I have a simple structure: app = webapp2.WSGIApplication([ (r'/', 'pages.login'), (r'/profile', 'pages.profile'), (r'/dashboard', 'pages.dash'), ], debug=True) Basically all pages require authentication except for the login. If visitor tries to reach a restrictive page and he isn't authorized (or lacks privileges) then he gets redirected to the login view. The question is about the routing design. Should I check the auth and ACL privs in each of the modules (pages.profile and pages.dash from example above), or just pass all requests through the single routing mechanism: app = webapp2.WSGIApplication([ (r'/', 'pages.login'), (r'/.+', 'router') ], debug=True) I'm still quite new to the GAE, but my app requires authentication as well as ACL. I'm aware that there's login directive on the server config level, but I don't know how it works and how I can tight it with my ACL logic and what's worse I cannot estimate time needed to get it running. Besides, it looks only to provide only 2 user groups: admin and user. In any case, that's the configuration I use: handlers: - url: /favicon.ico static_files: static/favicon.ico upload: static/favicon.ico - url: /static/* static_dir: static - url: .* script: main.app secure: always Or I miss something here and ACL can be set in the config file? Thanks.

    Read the article

  • The Ideal Platform for Oracle Database 12c In-Memory and in-memory Applications

    - by Michael Palmeter (Engineered Systems Product Management)
    Oracle SuperCluster, Oracle's SPARC M6 and T5 servers, Oracle Solaris, Oracle VM Server for SPARC, and Oracle Enterprise Manager have been co-engineered with Oracle Database and Oracle applications to provide maximum In-Memory performance, scalability, efficiency and reliability for the most critical and demanding enterprise deployments. The In-Memory option for the Oracle Database 12c, which has just been released, has been specifically optimized for SPARC servers running Oracle Solaris. The unique combination of Oracle's M6 32 Terabytes Big Memory Machine and Oracle Database 12c In-Memory demonstrates 2X increase in OLTP performance and 100X increase in analytics response times, allowing complex analysis of incredibly large data sets at the speed of thought. Numerous unique enhancements, including the large cache on the SPARC M6 processor, massive 32 TB of memory, uniform memory access architecture, Oracle Solaris high-performance kernel, and Oracle Database SGA optimization, result in orders of magnitude better transaction processing speeds across a range of in-memory workloads. Oracle Database 12c In-Memory The Power of Oracle SuperCluster and In-Memory Applications (Video, 3:13) Oracle’s In-Memory applications Oracle E-Business Suite In-Memory Cost Management on the Oracle SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One In-Memory Applications on Oracle SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One In-Memory Sales Advisor on the SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One Project Portfolio Management on the SuperCluster M6-32 (PDF)

    Read the article

  • The Silverlight 4 Training Kit and Green Eggs &amp; Ham

    - by Jim Duffy
    Microsoft has released the Silverlight 4 Training Kit that steps you through the process of constructing Silverlight 4 business applications. “The Silverlight 4 Training Course includes a whitepaper explaining all of the new Silverlight 4 features, several hands-on-labs that explain the features, and a 8 unit course for building business applications with Silverlight 4. The business applications course includes 8 modules with extensive hands on labs as well as 25 accompanying videos that walk you through key aspects of building a business application with Silverlight. Key aspects in this course are working with numerous sandboxed and elevated out of browser features, the new RichTextBox control, implicit styling, webcam, drag and drop, multi touch, validation, authentication, MEF, WCF RIA Services, right mouse click, and much more!” What I think is pretty cool is that there are two ways to access this content, online and offline. Obviously the online version is great when you’re sitting at your desk and you’re connected to the web. What about when you don’t have a connection like when you’re located where you won’t eat green eggs & ham, like on a train or on plane perhaps? :-) You can download the offline version and hope that Sam I Am won’t be to distracting while you try to watch the videos or work your way through the labs. :-) Have a day. :-|

    Read the article

  • Collision Detection for a 2D RPG

    - by PHMitrious
    First of all, I have done some research on this topic before asking, and I'm asking this question as a mean to get some opinions on this topic, so I don't make a decision only on my own, but taking into account other people's experience as well. I'm starting a 2D online RPG project. I am using SFML for graphics and input and I'm creating a basic game structure and all for the game, creating modules for each part of the game. Well, let me get to the point I just wanted to give you guys some context. I want to decide on how I'm going to work with collision detection. Well I'm kinda going to work on maps with a tile map divided in layers (as usual) and add an extra 2 layers - not exactly in the map - for objects. So I'll have collisions between objects and agents (players - npcs - monsters - spells etc) and agents and tiles. The seconds one can be easily solved the first one need a little bit of work. I considered both creating a basic collision test engine using polygons and a quadtree to diminish tests since I'm going to be working with big maps with lots of objects - creating both a physical and graphical world representation. And I also considered using a physics engine like Box2D for collision tests. I think the first approach would take more work on my part but the second one would have the overhead of using a whole physics engine for just collision detection and no physics. What do you guys think ?

    Read the article

  • What features are helpful when performing remote debugging / diagnostics?

    - by Pemdas
    Obviously, the easiest way to solve a bug is to be able to reproduce it in-house. However, sometimes that is not practical. For starters, users are often not very good at providing you with useful information. Customer Service: "what seems to be the issue?" User: "It crashed!" To further compound that, sometimes the bug only occurs under certain environmentally conditions that can not be adequately replicated in-house. With that in mind, it is important to build some sort of diagnostic framework into your product. What types of built-in diagnostic tools have you used or seen used? Logging seems to be the predominate method, which makes sense. We have a fairly sophisticated logging frame work in place with different levels of verbosity and the ability to filter on specific modules (actually we can filter down to the granularity of a single file). Error logs are placed strategically to manufacture a pretty good representation of a stack trace when an error occurs. We don't have the luxury of 10 million terabytes of disk space since I work on embedded platforms, so we have two ways of getting them off the system: a serial port and a syslog server. However, an issue we run into sometimes is actually getting the user to turn the logs on. Our current framework often requires some user interaction.

    Read the article

  • cpufreq-selector, cpufreq-info reporting wrong max speed

    - by dty
    Hi, I've just built a new machine with a Core i5-760 CPU. Max speed is 2.80GHz (turbo mode notwithstanding). I've also done a vanilla install of Ubuntu 10.10. I've added the cpufreq-selector applet to the top panel, and its menus only allow me to select up to 2.39GHz. If I select the "performance" governor, it also shows 2.39GHz. cpufreq-info reports: $ cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.20 GHz - 2.39 GHz available frequency steps: 2.39 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.20 GHz and 2.39 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.20 GHz. cpufreq stats: 2.39 GHz:13.74%, 2.26 GHz:0.09%, 2.13 GHz:0.08%, 2.00 GHz:0.08%, 1.86 GHz:0.07%, 1.73 GHz:0.07%, 1.60 GHz:0.08%, 1.46 GHz:0.08%, 1.33 GHz:0.11%, 1.20 GHz:85.61% (15560) [...CPUs 1-3 elided, but similar...] Any idea how to get Ubuntu and the various tools to recognise this as a 2.80GHz processor? And ideally to report the actual speed when running in turbo mode too, but that's not critical. Edit: I should probably add that the BIOS (& Windows) are quite happy that it's a 2.80GHz CPU. Thanks.

    Read the article

  • How to make pulseaudio and ubuntu detect the same audio device as alsa driver

    - by Kiwy
    I use Ubuntu 14.04 x64 and I use gnome-shell on my laptop. I have a Bose companion 5 (which is basically a USB sound system) and a HDMI port, both does work perfectly when I just boot with the cable plugin. However, when my laptop go to sleep or get unplugged from those two outputs, if I plug back the device, I end up without any hardware detection (only the built-in speakers) from pulse and gnome-shell sound output selector while if I use alsamixer, the device look up and ready. gstreamer-properties allow me to select and test effectively any device but while alsa recognize any device on the run, pulse is not capable of handling things correctly, my question is then: How can I make pulse detect and use the same hardware as alsa, or how to remove completely and gracefully pulseaudio (meaning volume applet running in gnome shell) I don't mind if the project implies to recompile half gnome shell if it implies those audio outputs work all the time. Pulse does not list my soundcard when I use command pactl list cards while the module plug&play for sound card is loaded in pactl list modules. I really don't know what to do, the behavior seems pretty random.

    Read the article

  • LUKS no longer accepts my my passphrase

    - by Two Spirit
    I created a 4 drive RAID5 setup using mdadm and upgrading from 2TB drives to the new Hitachi 7200RPM 4TB drives. I can initially open my luks partition, but later can no longer access it. I can no longer access my LUKS partition even tho I have the right passphrases. It was working and then at an unknown point in time loose access to LUKS. I've used the same procedures for upgrading from 500G to 1TB to 1.5TB to 2TB. After the first time this happened a week ago, I thought maybe there was some corruption so I added a 2nd Key as a backup. After the second time the LUKS became unaccessible, none of the keys worked. I put LUKS on it using cryptsetup -c aes -s 256 -y luksFormat /dev/md0 # cryptsetup luksOpen /dev/md0 md0_crypt Enter LUKS passphrase: Enter LUKS passphrase: Enter LUKS passphrase: Command failed: No key available with this passphrase. The first time this happened while I was upgrading to 4TB drives, I thought it was a fluke, and ultimately had to recover from backups. I went an used luksAddKey to add a 2nd key as a backup. It happened again and I tried both passphrases, and neither worked. The only thing I'm doing differently this time around is that I've upgraded to 4TB drives which use GPT instead of fdisk. The last time I had to even reboot the box was over 2 years ago. I'm using ubuntu-8.04-server with kernel 2.6.24-29 and upgraded to -2.6.24-31, but that didn't fix the problem.

    Read the article

  • Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

    - by Najdmie
    I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

    Read the article

  • 1.5 TB USB Drive failed to mount

    - by user89348
    Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • NetBeans Hangs on New Project Creation

    - by Jason
    When creating a New Project in NetBeans, it hangs on the creation screen; Screenshot I'm running Netbeans 7.0.1 on Xubuntu 13.04. Java -version prints: java version "1.7.0_25" OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1ubuntu0.13.04.2) OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode) /usr/lib/jvm/ contains the following folders; java-1.5.0-gcj-4.7-amd64 java-6-openjdk-amd64 java-7-openjdk-common java-1.6.0-openjdk-amd64 java-6-openjdk-common java-1.7.0-openjdk-amd64 java-7-openjdk-amd64 I tried editing /usr/share/netbeans/7.0.1/etc/netbeans.conf with the following (as was suggested in another post); netbeans_jdkhome="/usr/lib/jvm/java-7-openjdk-amd64/jre/" But that didn't work. Instead, NetBeans then presented an error on the loading splash when it reached "Turning on Modules..." claiming the JDK was missing. Both NetBeans and the OpenJDK Java 7/6 Runtimes were installed through the Ubuntu Software Centre. I've also tried uninstalling and reinstalling both Java and NetBeans. Any help would be greatly appreciated, thanks!

    Read the article

  • Chrome window controls in xubuntu 12.04

    - by Norbert
    I'm a long time ubuntu 10.04 LTS user, very used to having window controls on top left borders. New computer with new video card requires newer kernel. Unity doesn't suit and much googling turned up recommendations for xubuntu. Installed 12.04 and first aggravation is window controls at upper right a la Windows. No problem ... Settings Manager - Windows Manager - rearrange button layout Fixes everything until ... I abandoned firefox long ago because of memory leak issues and general fat. I fetch a current version of chrome (19.0.1084.52) and install. Once adblock is added and it's the default browser, everything's great. Except ... Alone among all applications, chrome will not honour the window manager's preferred button layout. Buttons are at upper right no matter what I try. Uninstall and then reinstall: nope. Trawl through /home/user/.config/google-chrome/* looking for a likely setting: nope. Search the web: nothing useful. How do I get chrome's window decoration in sync? Thanks very much for any and all help.

    Read the article

  • Can no longer boot with rEFIt and Grub on early 2006 MacBook Pro

    - by Don Quixote
    I don't know what happened to cause this. I have Snow Leopard, Ubuntu 11.04 Natty Narwhal and Windows XP SP3 on my early 2006 MacBook Pro. It is a Core Duo unit, NOT Core 2 Duo, so it is 32-bit only - Model Identifier MacBookPro1,1. I use rEFIt 0.14 for my boot menu. For some reason neither XP nor Ubuntu would boot anymore. I'd just get a black screen with a rapidly flashing underscore in the top-left corner. Having both those OSes failing to boot suggested a problem with the boot loader in my MBR. The rEFIT partition tool verified that my MBR partitions were still synced with my GPT partitions, so I rewrote my MBR partition table with fdisk while booted from Parted Magic: # fdisk /dev/sda (fdisk warns about the disk having a GPT. I press on anyway.) p (Print the existing partition table to make sure it's OK.) w (Write the old partition table back to disk. This also writes a new MBR boot loader.) After this XP would boot but Ubuntu would not, with the same symptom. Now I used update-grub while chrooted into Ubuntu from Parted Magic: # mount /dev/sda3 /mnt # mount --bind /dev /mnt/dev # mount --bind /sys /mnt/sys # mount --bind /proc /mnt/proc # chroot /mnt Chroot issues some warnings about not being able to identify some group IDs. I don't know why that happens, or whether it is a problem. At this point while I am still booted off of Parted Magic's kernel, I am running from Natty's filesystem. # update-grub Update-grub detects each of my operating systems then claims to complete successfully, but still won't boot. I asked this same question over at rEFIt's Sourceforge support forum but there have been no replies yet. I also Googled quite a bit, and see many who have the same black screen problem, but none of their situations seem quite like mine. Thanks for any help you can give me. -- Don Quixote

    Read the article

  • 14.04 LTS Unity no longer boots after last 94 MB update

    - by Harryg123
    I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

    Read the article

  • Fan always on and overheating problems on HP G62

    - by Dave
    I have a HP G62 with i5 processor, 4G Ram and ATI HD 5470. Started using Ubuntu 4 months ago, first was 11.10 and after 12.04. Everything worked perfectly until some weeks ago when my cpu fan became "crazy" and I mean by this always on, noise and overheating problems, for sure if I put a glass with water in some minutes will boil (and I mean it). There can be a bug in the last kernel or any other Ubuntu's official update? And by the way CPU fan is cleaned like a new born baby; Used jupiter and all those stuff (lm-sensor, psensor...) - same problem; Don't ask me to install ATI drivers because will work like sh#t (interface laggy as HD 5470 isn't supported by Ubuntu) and I can't even open ATI Catalyst (error when I try to open it), more than this I always used open source drivers and as I said, worked perfectly (3d, effects). Right now I'm back to Windows and everything is working perfectly but my main problem is that I get used with Ubuntu and kinda weird to use windows again. I want back my nice and almost perfect Ubuntu. Thanks, Dave

    Read the article

  • Are the Ubuntu ISO images updated From release .ubuntu.com

    - by tijybba
    Just got idea from this(may not be related though) question however. Are the ISO images from the official site updated with updates in Core Ubuntu system , like Kernel Updates , desktop Environment Updates(unity), i mean Updates of BASE system including X-org, Office suite, Package Manager , Update manager or Gnome Base Modules, those released in update Branches like precise-Updates branch. The reason i am asking this is , if i download the ISO image of Ubuntu 12.04 Say after two or three months from release , i have to do an update of approximately 200~300 MB's size. So why are these ISO images not updated to recent updates, i am aware that all of the components are not updated at the same time , but let's say after One month from actual release ( Both LTS and normal releases), the updated components can be added to form a Updated ISO in regular intervals, which provides new users to use latest versions and features with improved stability and less bandwidth Consumption. I am not mentioning the idea of comparison to Rolling Release , or External PPA's added updates , and neither Netinstal but the ISO of updated Packages .This can be provided as optional download. Since my question is within the boundary of Official updates releases so stability could not be the reason. I guess there are custom packagers out there , but having an official option would be better. It helps in distributing Newest ISO OS which impresses a lot new users , since it makes availability of newer features and a faster system ofcourse. Another reason of asking this is here. Edit: Since almost all new (Desktop) users download the Default ISO's having one or few issue , which may have been corrected in following updates. But most of new laptop users i encountered gave up because of it , so should i suggest ,for laptop not listed on Certified H/W list , to try daily Builds , if needed.

    Read the article

  • Where can I find design exercises to work on?

    - by Oak
    I feel it's important to continue practicing my problem-solving skills. Writing my own mini-projects is one way, but another is to try and solve problems posted online. It's easy to find interesting programming quizzes online that require applying clever algorithms to solve - Project Euler is one well-known example. However, in a lot of real-life projects the design of the software - especially in the initial phases - has a large impact and at later stages it cannot be tweaked as easily as plain algorithms. In order to improve these skills, I'm looking for any collection of design problems. When I say "design", I mean the abstract design of a software solution - for example what modules will there be and what are the dependencies between them, how data will flow in the program, what sort of data needs to be saved in the database, etc. Design problems are those problems that are critical to solve in the early stages of any project, but their solution is a whiteboard diagram without a single line of code. Of course these sort of problems do not have a single correct solution, but I'll be especially happy with any place that also displays pros and cons of the typical solutions that might be used to approach the problem.

    Read the article

  • Oracle Database 12c and Oracle Solaris 11 DTrace

    - by Larry Wake
    As you may have heard, Oracle Database 12c is now available for Oracle Solaris and Oracle Linux. Among other things, that means we now have the opportunity to share some of the cool things the Oracle Database and Oracle Solaris engineering teams have been doing together. And here's a good one: In this screencast, Jon Haslam describes how on Oracle Solaris 11, DTrace is now integrated into Oracle Database V$ views to provide a top-to-bottom picture of a database transaction I/O -- from storage devices, through the Oracle Solaris kernel, up to Oracle Database 12c itself: With this end-to-end view, you can easily identify I/O outliers -- transactions that are taking an unusually long time to complete -- and use this comprehensive data to identify and mitigate storage system problems that were previously extremely hard to debug. This is a great example of the power of DTrace, which is just about to celebrate its 10th anniversary in the wild. The screencast has some nice examples of DTrace's power on its own, as well as diving into the DTrace/Oracle Database 12c synergy. There's more, of course.  Over on the OTN Garage blog, Rick Ramsey has put together a nice compendium of ways the OS makes the database scream, and Ginny Henningsen's written an article on the same topic.  And, we've also got an OTN page that digs further into Oracle Database / Oracle Solaris synergies.

    Read the article

  • Decreasing the Height of the PinkMatter Flamingo Ribbon Bar

    - by Geertjan
    The one and only thing prohibiting wide adoption of PinkMatter's amazing Flamingo ribbon bar integration for NetBeans Platform applications (watch the YouTube movie here and follow the tutorial here) is... the amount of real estate taken up by the height of the taskpane: I was Skyping with Bruce Schubert about this and he suggested that a first step might me to remove the application menu. OK, once that had been done there was still a lot of height: But then I configured a bit further and now have this, which is pretty squishy but at least shows there are possibilities: How to get to the above point? Get the PinkMatter Flamingo ribbon bar from java.net (http://java.net/projects/nbribbonbar), which is now the official place where it is found, and then look in the "Flaming Integration" module. There you'll find com.pinkmatter.modules.flamingo.LayerRibbonComponentProvider. Do the following: Comment out "addAppMenu(ribbon);" in "createRibbon()". That's the end of the application menu. Change the "addTaskPanes(JRibbon ribbon)" method from this... private void addTaskPanes(JRibbon ribbon) { RibbonComponentFactory factory = new RibbonComponentFactory(); for (ActionItem item : ActionItems.forPath("Ribbon/TaskPanes")) {// NOI18N ribbon.addTask(factory.createRibbonTask(item)); } } ...to the following: private void addTaskPanes(JRibbon ribbon) { RibbonComponentFactory factory = new RibbonComponentFactory(); for (ActionItem item : ActionItems.forPath("Ribbon/TaskPanes")) { // NOI18N RibbonTask rt = factory.createRibbonTask(item); List<AbstractRibbonBand<?>> bands = rt.getBands(); for (AbstractRibbonBand arb : bands) { arb.setPreferredSize(new Dimension(40,60)); } ribbon.addTask(rt); } } Hurray, you're done. Not a very great result yet, but at least you've made a start in decreasing the height of the PinkMatter Flamingo ribbon bar. If anyone gets further with this, I'd be very happy to hear about it!

    Read the article

  • Boot failure randomly. Can someone help?

    - by desgua
    I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

    Read the article

  • HP Notebook Pavilion g6-2101sl freeze

    - by StErMi
    I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

    Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >