Search Results

Search found 7129 results on 286 pages for 'battery usage'.

Page 226/286 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• Google Chrome is running my system out of memory

  - by jasondavis

  I am running Windows 7 x64 with 12GB of RAM I often have multiple windows and a ton of tabs open. I use the extension Session Buddy to restore all my windows and tabs once the memory gets too high. So my 12gb of ram will get up to around 93% used because of Chrome, now I can close chrome down and restore the same amount of windows and tabs and it will only use about 25% of memory, it then over time increases back up to the 90% zone after several hours. It seems that when I close tabs, instead of freeing that memory up, it doesn't so that is why the huge increase of memory usage as new tabs are opened and closed it just adds up, this sounds like a huge bug in chrome. Just for an example I just re-booted my system, I only have 1 window with 4 tabs open and in the task manager, it shows 29 chrome.exe processes I then killed all chrome processes and opened a chrome window with just 1 tab, it made 27 chrome.exe processes. Is this an issue that others have? More importantly, is there a fix? UPDATE I just read that each plugin and extension creates a chrome.exe process, I then couunted 24 extensions so that helps explain a portion of the large processes. Still not sure about memory not being freed up though!

  Read the article

• Why does Windows/Microsoft Updates always take such a long time to detect available updates?

  - by RLH

  It's a common task for many of us who work in any form of IT position using Windows. Eventually you have to install/re-install a version of Windows and what follows is a very long OS updating process. For a long time I have accepted the fact that this is a slow process and that's all there is to it. There is a lot to download, and some updates require restarts followed by further updates... Ugh! This morning I had to go through the process of installing Windows XP with SP3. I'm installing the OS on a VM on an SSD and I've been working on this thing for over 6 hours. Although, think there are many ways to knit-pick this process for improvements, there is one step that is always particularly slow and I can not figure out a good reason why. That step is the detection step on a manual update. Specifically, when navigate to the Windows (or Microsoft) Updates page, and then click the 'Custom' button to detect your updates. It appears that your PC just sits there for a painful amount of time. Check your Task Manager and it looks like your PC is, in fact, locked because your CPU isn't cooking but that's certainly not the case. Somethings happening but I have no clue what's going on? What is the updating software doing? If the registry was being searched, shouldn't my CPU usage peak? Does anybody know what's happening? I can loosely justify why some of the steps in the update process take so long. However, this one doesn't seem to have any reasoning.

  Read the article

• High memory utilization with firebird + windows server 2008 r2

  - by chesterman

  i have a Windows Server 2008 R2 (64bit) running a 64bit installation of Firebird 2.1.4.18393_0 in a 4GB phisical server. After a while, the task manager show that all memory is used, but the sum of the memory of all process does not stack to the half of the memory. Unfortunally, it's start swapping. Using RAMMAP, i can see that my entire database file is mapped into the memory. This only occours in windows server 2008 r2 and windows 7 64 bit. i can use firebird 32 or 64bit installations, doesn't matter. How can i prevent this? Why this only occours in w2k8r2 and w7? tks in advance ** UPDATE Aparently, this occours by the use of all memory by the file system cache. The microsoft documentations explain that this WAS a issue in windows xp, 2k3, vista and 2k8, but it was solved in 7 and 2k8r2. also adds that this issue is more common in 64bit hosts. (http://support.microsoft.com/kb/976618) there are some tools (DynCache, setcache and the Get/SetSystemFileCacheSize system calls from windows API) that allows me to fix a upper limit to the memory usage by the fscache, but the documentation argues that i should not do this in w2k8r2 because it will severely impact on the overall system performance. anyway, i tried, the performance remained the same shit and the use of the page file remained, although there is now more the 1gb of free memory.

  Read the article

• Ubuntu on VPS becomes unresponsive: BUG: soft lockup - CPU#0 stuck for 22s

  - by Bhante Nandiya

  We have a VPS running Ubuntu, on Xen. The problem is this, about once a day, for about 20-50 minutes, at a random time, the server becomes completely unresponsive to the outside world. After this period, it becomes responsive again, as if nothing had happened, it doesn't lose uptime, it doesn't restart. It just starts responding again as if it had been in suspended animation. These outages occur under conditions of non-exceptional memory and cpu, for example 70% mem, 5% cpu. I have stopped all non-essential services so the usage is very even. These outages don't particularly occur during times of increased memory/cpu (during daily tasks), they sometimes occur at times of very low cpu use (<2%), but in the past also occured during swapping. These blackouts have been occurring both under Ubuntu 12.04 LTS, and Ubuntu 14.04 LTS - no change at all (I upgraded Ubuntu specifically to see if it helped this problem). It is possible to log into our webhosts site, and use their administration console to see error messages from during this time. Presumably, these messages are from the Xen virtualization, the main message goes like this: BUG: soft lockp - CPU#0 stuck for 22s! [ksoftireqd/0:3] (repeats many times) SysRq : Emergency Sync (Sometimes this is the only message in the console) Others seen previously under different load situations include: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] (repeated many times) or: INFO: rcu_sched detected stall on CPU 0 (t=15000 jiffies) (repeated many times with t getting bigger) From googling around I've tried various kernel parameters such as nohz=off and acpi=off to no avail. All tech support has said is that other Ubuntu installations are not suffering the same problem. Anyone got any ideas or experience with this problem?

  Read the article

• Track kids browsing history even when they know how to clear it manually

  - by Darren Newton

  I have a colleague with two teenage boys (yes, cue cliche's about 'I have this friend see...') He's currently having issues with them browsing pr0n and wants to do a little spying on their browsing (I'm staying clear of the philosophies/ethics on this.) The kids are savvy enough to clear their browsing history when they're done. As I'm his goto for IT he has asked me if there is a way to keep a hold of the browsing history. The family uses Macs, and the kids surf with Safari. I know that browsing history is kept here ~/Library/Safari/History.plist. I figure there should be a way to write either an AppleScript or other script (Python/Ruby/Bash) that can backup this file to a different location (/opt/local/history, etc.) Since the kids know to clear their history when they're done should the file be periodically backed up with something similar to a cron job or something like Hazel? While that could work it seems like it would create a ton of little incremental backups. Or is it possible to 'watch' ~/Library/Safari/History.plist and incrementally add changes to a backup file (saving a diff so to speak) but not lose any data? Any ideas/solutions appreciated. UPDATE/EDIT: Got the word from concerned dad that the oldest uses Firefox on a different PC, so the OpenDNS solution (preferably at the router level) is the best answer so far as it would capture usage for the whole house.

  Read the article

• "What happens?" server performance monitor

  - by AlexAtNet

  Hello! After reviewing some thread about server monitoring software I end up with a simple question: Which of the server monitoring tools should I use for automatic detection of "abnormal" situations with recommendations on how to fix them? I look for software that checks the system performance after installation and calculate some average load values (memory, CPU, etc). And when something happens (CPU load is increased to 20%) then it tries to detect a reason for this. If it is apache, it should check for access logs. If mysql, it should check mysql logs and tell me what happens. It this is because some user decodes a lot of images, I'd like to know which command is executed, when and user name. The same for disk usage, memory, number of processes, threads and so on. Ideally, this software should periodically checks the system and report problems: errors in PHP error log, outdated packages, security vulnerabilities. In other word I'm looking a software that will keep my simple Debian/Apache/PHP/MySQL server without forcing me to monitor the charts every day. I hope that such program exists. Thanks, Alex

  Read the article

• Php5-fpm Crash if much visitors

  - by chillah

  I decided to change my OP to Nginx from Litespeed because i read much about the low resource that Nginx would cost. Im running a Wordpress site with 500 users online My www.conf in "/etc/php5/fpm/pool.d" pm.max_children = 200 pm.start_servers = 20 pm.min_spare_servers = 20 pm.max_spare_servers = 60 ;pm.process_idle_timeout = 10s; ;pm.max_requests = 1000 Since i changed that config to higher requests and more children the Site needs longer till it shows me a White blank page. If i restart the php5-fpm prozess then, the site is running fine again. The CPU usage is at 5% if the php5-fpm is crashed and if its running its about 20 to 90%! Heres my Nginx.conf: user www-data; worker_processes 2; pid /var/run/nginx.pid; events { worker_connections 3048; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; I already tried changing the settings, tryed all variants but nothing worked. The Mashine: Dualcore 4gb ram

  Read the article

• How do I find the cause for a huge difference in performance between two identical Ubuntu servers?

  - by the.duckman

  I am running two Dell R410 servers in the same rack of a data center. Both have the same hardware configuration, run Ubuntu 10.4, have the same packages installed and run the same Java web servers. No other load. One of them is 20-30% faster than the other, very consistently. I used dstat to figure out, if there are more context switches, IO, swapping or anything, but I see no reason for the difference. With the same workload, (no swapping, virtually no IO), the cpu usage and load is higher on one server. So the difference appears to be mainly CPU bound, but while a simple cpu benchmark using sysbench (with all other load turned off) did yield a difference, it was only 6%. So maybe it is not only CPU but also memory performance. I tried to figure out if the BIOS settings differ in some parameter, did a dump using dmidecode, but that yielded no difference. I compared /proc/cpuinfo, no difference. I compared the output of cpufreq-info, no difference. I am lost. What can I do, to figure out, what is going on?

  Read the article

• SSD suddenly full

  - by Daniel

  Today the hard drive of our server was suddenly full. The disk usage always stayed around 50 % in the weeks and months before (old data is regularly expunged from the server). I deleted 10 GB of files in /tmp, which strangely freed 51 GB. Here is what I did: root@***:~# df -h Dateisystem Size Used Avail Use% Eingehängt auf /dev/sda3 139G 137G 0 100% / tmpfs 3,9G 0 3,9G 0% /lib/init/rw udev 3,9G 116K 3,9G 1% /dev tmpfs 3,9G 0 3,9G 0% /dev/shm /dev/sda1 985M 25M 910M 3% /boot root@***:/var# du -hs * 3,3M backups 438M cache 9,4G lib 4,0K local 12K lock 76M log 24K mail 4,0K opt 88K run 184K spool 10G tmp 12K www root@***:/var/tmp# find -type f -print0 | xargs -0 rm root@***:/var/tmp# df -h Dateisystem Size Used Avail Use% Eingehängt auf /dev/sda3 139G 81G 51G 62% / tmpfs 3,9G 0 3,9G 0% /lib/init/rw udev 3,9G 116K 3,9G 1% /dev tmpfs 3,9G 0 3,9G 0% /dev/shm /dev/sda1 985M 25M 910M 3% /boot Any explanation as to why deleting 10 GB in /tmp gave me back 51 GB on the disk? Could this point to an SSD failure? Are there any tools for Debian to test SSD health? I already have checked syslog. The first entry relating to this incidient is a mysql message: 1:22:02 [ERROR] /usr/sbin/mysqld: Disk is full writing... So I have absolutely no idea what caused this.

  Read the article

• High disk I/O activity in CentOS server

  - by triiim

  I have about 16 websites in a CentOS dedicated, and I am having some problems on high traffic hours, it seems to be a high disk I/O activity causing a general slowdown. I've installed atop and this is what I see on the bottom (the server has been restarted thats why the values are so low): *** system and process activity since boot *** PID RDDSK WRDSK WCANCL DSK CMD 1/18 2176 1.7G 7.3G 854.4M 39 mysqld 671 1248K 3.0G 0K 13 flush-8:0 566 0K 1.1G 0K 5 jbd2/sda2-8 2401 124.2M 529.1M 22408K 3 crond 2032 2.2G 502.0M 0K 12 nginx 2360 425.8M 115.3M 4188K 2 httpd flush-8:0 and jbd2/sda2-8 are the processes I see with iotop using 99% on the IO column, and they are the processes that write the most on the hdd (after mysql). From what I saw in google this could be caused by some ext4 related bug, the current kernel is: Linux srvr.com 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux I asked the hosting support to update the kernel and they tried but they now say that the server wont boot with the new installed kernel and they had to go back to the previous, they are not helping very much. Does someone has any idea how could I solve the high disk usage caused by flush-8:0 and jbd2/sda2-8 processes?

  Read the article

• pdns-recursor allocates resources to non-existing queries

  - by azzid

  I've got a lab-server running pdns-recursor. I set it up to experiment with rate limiting, so it has been resolving requests openly from the whole internet for weeks. My idea was that sooner or later it would get abused, giving me a real user case to experiment with. To keep track of the usage I set up nagios to monitor the number of concurrent-queries to the server. Today I got notice from nagios that my specified limit had been reached. I logged in to start trimming away the malicious questions I was expecting, however, when I started looking at it I couldn't see the expected traffic. What I found is that even though I have over 20 concurrent-queries registered by the server I see no requests in the logs. The following command describes the situation well: $ sudo rec_control get concurrent-queries; sudo rec_control top-remotes 22 Over last 0 queries: How can there be 22 concurrent-queries when the server has 0 queries registered? EDIT: Figured it out! To get top-remotes working I needed to set ################################# # remotes-ringbuffer-entries maximum number of packets to store statistics for # remotes-ringbuffer-entries=100000 It defaults to 0 storing no information to base top-remotes statistics on.

  Read the article

• Which project management software for technophobes who've never worked with something like that?

  - by Ernst

  Hi, Our director has asked me to get something to manage projects. Note that so far we haven't used anything of the sort. I did not get very clear instructions yet, probably because she doesn't know exactly what we need either. My guess is, we'll only find out while using something. I've looked at some, openworkbench, ganttproject, and microsoft project. The latter has the advantage of easy importing of users from exchange, are there others that do that (even if not directly, easily)? I don't think it's a critical requirement though. We're using some other custom software where I have to add users manually anyway and we're small enough that it's maybe once a month that I have to add or remove a user. In any case, I'm not in favour of buying anything, since I'm skeptic about us actually succeeding in putting it to good use, and even if we do, we will only during usage discover what we need. We're also not a tech shop, most people vary from not very technically adept to technophobic. This means we need something very userfriendly. I prefer to stay away from online solutions, since we deal with sensitive information and I prefer to keep that in house, but I guess it would be acceptable for the trial period. An intranet site is an option though, but preferably something that is easy to set up with IIS. Xplanner plus and redmine I found too hard to set up for this experiment. Some other options I haven't yet tried to install, but which look to complex for our technophobes: Endeavour Software Project Management, Project-Open, Trac. Any suggestions? Thanks, Ernst

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• How do I change file protections running XP on a disk from Windows Server?

  - by cdkMoose

  I had a Windows Server 2003 machine running at home, along with my desktop which I use for development. Server went belly up, but since my desktop is reasonably powerful, I figured I would move the disk from the file server (it was OK) into my XP machine to keep all of the files. Disk comes up fine and shows all of the files. I have been getting access denied errors when trying to work with some of the files. When I display attributes in Explorer, none of them are marked Read-Only. When I view properties on the directories, the Read-Only checkbox is not checked, but has a green background(which I thought meant mixed usage for files in the directory). When I click on the checkbox to clear it and click Apply, the disk does some work and all looks well. However, I continue to get the Access Denied errors, the files still don't show any Read-Only attribute and the directory properties shows the green background again on the Read-Only checkbox. I did check the box which says to apply the change to the folder and all files /subfilders under it. I am assuming that the issue relates to userids/permissions carried over from the Server install. So, why does it let me think I can change the attribute when I can't and how can I correct this problem so that the disk correctly recognizes the ids from XP?

  Read the article

• Internet setup for my office

  - by prakash

  We have two internet connections to our office and our current setup is like this.. The internet connections require pppoe log in so i take each cable and plug it into a wifi router and configure the router to log in to the pppoe and then plug in a cable from the router to a switch and distribute the internet throughout my office. The problem with this setup is it is really hard to monitor and im not able to monitor who is hogging internet usage and what he or she is actually using it for. apart from this we also have a nas setup which is routed through another switch . Could someone please throw a little light on how i can restructure this setup for easy monitoring and better transparency... ? each wan router is connected to a different switch and is distributed to users accordingly.. we have around 40 users in the office.. we want to setup a single linux box to which i want to connect the two wan connections and from there distribute it to all our users.... im looking for a solution where we do not have to invest more that buying a single pc and a couple of nics

  Read the article

• System With Two Network Adapters

  - by Synetech inc.

  Hi, My system has a NIC (Marvell Yukon) built-into the motherboard, but I also have a D-Link (RealTek) card. I figure that using the D-Link and disabling the Marvell makes the most sense, though I'm wondering if maybe the built-in one has better throughput (not that my Internet connection is so fast). Also, I'm wondering about the merits of using both at the same time. My router has four ports and I have experimented with enabling and plugging both NICs into the router. I was able to connect to the Internet, but the pattern of usage seemed irregular (which adapter was chosen for the transfer and any given point). I also considered bridging the two, but am having difficulty in finding out what exactly creating network bridge does in the context of the Windows Network Connections window. I am familiar with the concept of connecting networks, so it seems to me that birding two connections on the same segment is pointless at best (and can cause problems like loops?) Does anyone have any tips on what to do if a system has more than one NIC and any clarification on the bridge option? Thanks a lot.

  Read the article

• Slow upload, fast download on Windows 7 64bit system

  - by Malik

  I've got a weird problem in the download speeds on my desktop PC (Windows 7 Home Premium 64bit) are consistently fast (approx. 400kB/s) but uploads are very slow (around 6-10kB/s). This has been going on for the last 3 weeks or so. I am a very competent user and troubleshooter, and have searched online for 2 weeks for a solution, to no avail. Part of the problem is that internet is provided by WiFi by my landlord and I have no access to the router (BT Home Hub router) although I know for sure he wouldn't have the first idea on how to restrict my usage :) (rules that out) Anyway, I've tried: - various drivers (my Wifi 'card' is TP-link TL-WN851N, and I've tried TP-link + Atheros + Qualcomm Atheross drivers, suggested by Microsoft) - various tweaks to network parameters (e.g. as suggested by SpeedOptimser) - various tweaks to Windows 7 services (e.g. disabling/manual-ing unecessary services) - raising and lowering head onto a reasonably firm surface at moderate frequency (jk :D) None of the above have helped, and I'm officialy asking for help now!! Thanks for your time and effort in advance!

  Read the article

• Choice of filesystem for GNU/Linux on an SD card

  - by gspr

  Hi. I have am embedded ARM-based system running on an SD card. It's currently Debian GNU/Linux using ext3 as filesystem. As I'm about to reinstall the system, I started wondering about changing to a more flash-friendly filesystem. I've heard about JFFS2, YAFFS2 and LogFS, and they all seem suited to the job. Which one would you recommend? Also, I've heard there have been a lot of ext4 improvements to better suit SSD disks; am I to interpret that as running ext4 should be just fine? What do I need to think especially about in that case? I guess the usage of the system is important. But for the sake of generality, imagine it'll do standard desktop stuff (even though it is infact a small ARM-based system). Thanks for any replies. Edit: Wikipedia tells me (in a "citation needed" statement) that Removable flash memory cards and USB flash drives have built-in controllers to perform wear leveling and error correction so use of a specific flash file system does not add any benefit. Thus, I'm leaning towards sticking with an ext filesystem.

  Read the article

• Computer freezing while watching Flash videos from net

  - by t3st

  I have a Windows 7 home basic, while watching videos from net (within 5 minutes) computer starts to freeze and shows 100 percent CPU usage. I first thought it's a browser issue but watching videos from different browsers also has the same issue. My system runs the latest Firefox browser and all my plugins (including Flash) is up-to-date. After this when I shutdown/restart the computer it will go to the login window with out any problem. From there when I tried to log in to any account, the system starts to freeze and again I have to start and run Windows in safe mode (which doesn't show any problem). I read it in an article to do these steps CMD->sfc/scannow chkdsk after that only my system works normally, even now I can't watch any videos on the net otherwise it starts freezing( I can watch downloaded videos in computer without a problem) and have to do the whole process once more (which takes a lot of time). while running sfc/scannow its showed results that some of the files are corrupted and it could not be repaired. Can this be the cause for freezing of my computer while running Flash videos? or is it a hardware related problem? What different steps do I have to take to correct those corrupt files? System restore works only some times.

  Read the article

• Disk Activity Alert Windows SBS 2003 on Dell PowerEdge 830 with Raid

  - by Ron Whites

  Background: I have a Dell PowerEdge 830 Server running Windows SB Server 2003. It has 4gbs of RAM and a ATA CERC SATA 6CH controller with 3 160gb drives in a Raid 5 configuration. The Problem I am seeing Admin ---"Disk Activity Alert on Server" emails These often occur when disk backups, de-frag or high disk usage is going on. Generally the server isn't over stressed. The Disk Alert emails say in part ... The following disk has low idle time, which may cause slow response time when reading or writing files to the disk. Disk: 0 C: F: D: Review the Disk Transfers/sec and % Idle Time counters for the PhysicalDisk performance object. If the Disk Transfers/sec counter is consistently below 150 while the % Idle Time counter remains very low (close to 0), there may be a problem with the disk driver or hardware. The Questions I have: With what utility can I review the Disk Transfers/sec and Idle Time? It appears there is no utility for that on the server! I think I may need to download a very large (two DVD) Dell "OpenManage" utility to be able to monitor the raid system and see what is a problem is that true?

  Read the article

• Apache suddenly very slow on http and faster on https

  - by hsnm

  Background: I have Apache 2 running on ubuntu. There is a low usage on it and mostly being accessed for a web service URL from mobile apps. It was working fine until I installed SSL certificates. I now have both http and https. When I access the server using https, I get a fairly quick response (but probably not as fast as before). When I use http, it's so slow. What I tried: From this post: I curl localhost from the host and it takes some time, meaning there is no routing issue. The server runs on Amazon EC2 instance and is managed by me only. Also: I see that Apache once running, creates the maximum number of processes it is allowed to, which was not the case before. I lowered the MaxClients to 20 and I think I'm getting faster responses but it still takes over a minute and I always have MaxClients Apache processes. dmesg returns many [ 1953.655703] TCP: Possible SYN flooding on port 80. Sending cookies. When I netstat I get many entries with SYN_RECV. Possibly a DDoS attack? From EC2's monitoring diagrams I see a pattern of high "Maximum Network In (Bytes)" since 2 days ago. By the way the server is still being tested, the actual traffic is very low and not consistent. I tried to go with this solution to limit incoming connections using iptables, still no luck, but I'm trying. Question: What could be the problem? Is this a DDoS attack?

  Read the article

• Win 7 crashes, PC reboots and says "Hard drive 0 not found" until I turn if off and on again

  - by Danny T.

  I recently made the move from Windows XP to Windows 7. Since then, when my computer is on for a few hours it always ends up rebooting without warning. Then the BIOS won't recognize my hard drive (hard drive 0 not found). If I turn off my computer and then on again, it boots normally. Some details: Dell Dimension 9150 Windows 7 I updated the BIOS I updated all system drivers with the latest version from Dell (SATA, Chipset, etc.) Other drivers updated too (Graphic card, sound, etc.) There is one thing that I tried after some Googling: I turned off the DMA access to the drives, but it's still rebooting after a few hours. Any clue? UPDATE 2010/12/13 Here are the events from the Event Log for today, from when I turned the computer on until it crashed: 19:17 - Error - ID 10016 - DistributedCom 20:06 - Error - ID 1008 - Customer Improvement Program (could not send data to Microsoft) 21:48 - Critical - ID 41 - Kernel-Power (System was restarted without proper shutdown) 21:48 - Error - ID 6008 - EventLog (Previous system down was not planned) 21:48 - Error - ID 1101 - EventLog (Audit Event ignored) 21:49 - Error - ID 10016 - DistributedCom Both DistributedCom events have a description along these lines (translated from French): The authorisation parameters specific to the application are not allowing Local Execeution for the COM server application with the CLSID {C97FCC79-E628-407D-AE68-A06AD6D8B4D1} and the APPID {344ED43D-D086-4961-86A6-1106F4ACAD9B} to the SID AUTHORITY NT\User System (S-1-5-18) from the address LocalHost (LRPC usage). This security authorisation can be changed with the Component service administration tool. UPDATE 2010/12/31 Here are the error messages I have on blue screens : STOP C000007xA - Kernel_Data_Inpage_Error "Unkown hard error" C00000135 - Can't start because &hs is missing

  Read the article

• Suggestions for Backup solution

  - by jiewmeng

  i am considering between windows home server simple nas extra HDD's in desktop btw, i will be the main user i am looking to fulfil the following needs: reliability (i am think RAID 1 or 5) not so prone to virus/malware infections (will using a separate NAS or home server help? say windows home server is still a windows pc except separated by network?) power efficiency (eg. spin down when not in use) download (eg. i may want to dl big files/torrents overnight and i may not want to use a full powered PC for it? does a full pc vs NAS provide significant power usage to justify cost of new system esp. since i am only user?) performance (i guess i like to write/access my files fast, on 2nd thought, maybe for backup i can forgo this? maybe for a WD Green HDD? but how much slower will it be? plus since i am the only user, i think the whole HDD will be mine?)

  Read the article

• torrent downloads not showing on Squid log

  - by noobroot

  hello, i have just a few months working as sysadmin, hence i still have lots to learn, first thing id like to do is as follows: We have an OpenBSD 4.5 box acting like firewall,dns,cache etc, the box has 2 network cards, one conected directly to the internet and the other to our switch, i used to work with sarg for the log analysis but then changed to the much faster free-sa. I use a daily free-sa report to check the bandwidth usage and report our top 5 bandwidth consumers (3 days a week being #1 and you will be buying the pizzas :D, we are a small company ~20 so we are very familiar). this was working really good until recently, one of us required to download some stuff via torrent (~3GB) and since the pizza rule is active for non-work related downloads, he told me (verified) that his download was indeed work related so i would dismiss that 3GB off his quota, but to my surprise the log didnt showed that 3GB, since his ip consumption was only around 290MB. More recently, since the FIFA world cup started, we know that some of the employees are watching the match's streaming, we know it and we dont care about it since, like already stated, we are a small company so we dont have restrictive policies, we all can chat, watch youtube, download anything we want BUT we are only allowed 300MB a day otherwise you'll get in the top5-pizza-board, anyway, that streaming consumption is also not showing in the free-sa reports. So my question is, why is these data being excluded from the reports? im thinking that the free-sa reports list only certain types of things but im also thinking if are the squid logs the ones that are not erm... logging these conections. Any help, guide, advice or clarification is appreciated.

  Read the article

• VPS Memory Exchausted Even With Light Settings

  - by user101570

  Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >