Search Results

Search found 27308 results on 1093 pages for 'nvidia current dev'.

Page 23/1093 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Triple-head on a Lenovo T520

  - by codeape

  Lenovo T520 with integrated Intel HD graphics + a NVidia card (Optimus) Ubuntu 11.10 on the computer. I would like to use the built-in screen plus two external screens. This PDF indicates that it is possible to connect up to four external monitors to the laptop. The information is Windows only. I was planning to disable the NVidia card, since I have read that Linux support for Optimus is not good. Questions: Has anyone set up three monitors on NVidia hardware? Has anyone set up three monitors using Intel HD 3000? Can I expect it to work out of the box, or are there tricks I need to be aware of?

  Read the article

• Ubuntu 11.10 doesn't detect Intel integrated graphics (i7-2670QM CPU)

  - by Telmo Marques

  The laptop I'm using is an MSI GT683DX-847PT that comes with an NVIDIA GeForce GTX570M discrete GPU, and an Intel Core i7-2670QM CPU. According to Intel's description of the Core i7-2670QM CPU, it has an HD Graphics 3000 integrated GPU. The problem is that the Intel integrated graphics GPU doesn't come up in lspci nor in lshw, only the NVIDIA GPU shows up. Here is the output of both commands: sudo lspci: http://pastebin.com/raw.php?i=9AZg8bJy sudo lshw: http://pastebin.com/raw.php?i=6cAMFQsY I was counting on having two GPU's to run CUDA programs on the discrete NVIDIA GPU, while X was handled by the integrated Intel GPU, to prevent kernel execution timeout. Why doesn't the Intel HD Graphics 3000 GPU show up? Any tests I could make to verify the presence of an integrated GPU?

  Read the article

• Vdpau performance in Precise with Unity 3d

  - by bowser

  vdpau seems to be broken in Precise under Unity 3d. CPU usage ranges around 50-70% for 1080p movies while same movies utilizes around 5-10% in Natty with vdpau enabled (under Unity3d) The card is Nvidia G105m. It doesn't seem to be a Nvidia driver problem because in gnome-shell everything works as expected and I have tried different versions of Nvidia drivers (295.20, 295.33, 295.40 and the latest 302.XX from xorg-edgers) The results are all the same, works in Gnome Shell but not in Unity 3d. Disabling syn to vbank works if movie is not in full screen mode, but it doesn't work for full screen. I have searched around and haven't found much info. I am wondering if others are experiencing the same problem and if there are some known work around that I have missed. Unity 3d is otherwise very nice in Precise, but this is a show stopping issue for me (literally). Thanks. I have filed a bug here https://bugs.launchpad.net/unity/+bug/993397

  Read the article

• Video Freezes Every few seconds

  - by Chandan

  Hi, I have problems playing videos on my Ubuntu 10.10 machine. The video FREEZES every 20-25 seconds, while I could still hear the audio. I use Totem Movie Player (GStreamer) & have nVidia on-board graphics card & AMD DualCore processor. After some 5-10 seconds, the videos resumes skipping the hung portion. But, I can hear the audio of that part! I've tried it with SMPlayer (GUI), VLC & Kaffeine. But, the same problem... I recently uninstalled the nVidia drivers and since then, not even for a second, no video hung! So, I thought its the problem with the proprietary nVidia drivers. But, since its uninstalled, I'm not able to get the desired desktop resolution & effects. So, is there any way I can work it out?

  Read the article

• Cannot login via Unity login screen after upgrade to 12.04

  - by codesurgeon

  Logging in via the shell accessed through Ctrl+Alt-F1 and logging in as guest via the graphical user interface work 0O When I try to log into my standard user account via the graphical interface, the screen flashes to black for a couple of seconds and bumps me back to a pristine login screen. Entering a wrong password for my user account yields the standard error message - my user account and credential verification seem to be OK. I suppose that my individual graphics configuration causes problems ... I'm not sure how to reset that. I've tried stopping the UI via sudo service lightdm stop executed sudo nvidia-xconfig and restarted the UI sudo service lightdm start to no avail. My workstation has a Nvidia GeForce 560-448 graphics card. I've tried getting this fixed with the latest Nvidia 64-bit drivers (cURL'ed from the official website), that is 295.49 and the latest beta driver 302.07. Anybody have an idea how to get this fixed? Your help is appreciated :)

  Read the article

• Display not using xorg.conf?

  - by mark kirby

  How can I force my PC to use the xorg.conf file ? I have it set up correctly and it is located at etc/x11/xorg.conf but it is ignored by at start up, I know the file is valid as I created it using nvidia-settings. I just do not know why it is been ignored. Thanks for any help Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Vestel 40 FHD_LCD-TV" HorizSync 15.0 - 46.0 VertRefresh 49.0 - 61.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 650" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60 +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Cannot upgrade or install 12.04 - Black screen

  - by Paul

  An update from 11.10 to 12.04 failed because of a boot into black screen (Nvidia graphics card) after selecting normal boot in Grub (recovery console was available though). I then wiped the whole partition (deleting all proprietary drivers) and tried a fresh install, but could not run the installation cd because it was booting straight into a black screen again. Now I reinstalled 11.10 (and installed proprietary Nvidia driver version 173), and would like to ask 2 questions: 1 - Is there a proven method to fix this problem from the recovery console, so that I can safely try upgrading again (without much knowledge of Ubuntu)? 2 - Is there a website which I could check for updated Nvidia drivers packaged into the upgrade, so that I can safely upgrade without running into a black screen some time later on?

  Read the article

• Why am I stuck at 640x480 on an Optimus hybrid-graphics system?

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• 12.04 monitor brightness commands ignored

  - by jarvisschultz

  I cannot change the brightness of the monitor on a laptop either from the command line or from keyboard shortcuts. I have verified that the file in /sys/class/backlight/acpi_video0/brightness is changing. I have also verified that I am running the nvidia drivers. Things I have tried: Adding entries to /etc/default/grub The GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX entries now read GRUB_CMDLINE_LINUX_DEFAULT="quite nosplash acpi_backlight=vendor" GRUB_CMDLINE_LINUX="noapic" I have also tried various commands here (with an update grub and reboot each time) but nothing has helped I enabled brightness control in /etc/X11/xorg.conf so that it now looks like Section "Device" Identifier "Default Device" Driver "nvidia" Option "NoLogo" "True" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Investigated installing linux-kamal-mjgbacklight and determined it was not applicable to my system Nothing seems to have made any difference. I am using an Nvidia GeForce GT 330M with driver version 295.40. Does anyone have any other suggestions?

  Read the article

• screen driver problem

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• Problems after upgrading to 14.04 (only background and pointer after login)

  - by fabikw

  After upgrading from 12.04 to 14.04 I could log in to my X session (albeit with really low graphics). While trying to fix the graphics, I managed to break the X session. Now, after typing my password in the unity-greeter, the items disappear and I can only see the desktop background and the pointer. This happens for every user. I can still log in in tty's. How can I solve this? Also, I cannot seem to be able to install nvidia-current as it tries to install nvidia-304 and it depends on old video-abi libraries. Is there a way to tell the package manager that nvidia-current should use a newer version?

  Read the article

• Boot screen appears to be asking a question but garbled

  - by mark kaylor

  I'm running 12.04 Precise Pangolin, Kernel 3.2.0-32 w/ GNOME 3.4.2 I perused the prior questions/answers and did not find exactly the same problem, I am concerned that AUTOFSCK, Grub or some other critical event that needs some attention ? Any idea on how to get my video clean during boot? Once I get past the boot screen the video driver/card, etc is performing beautifully ! Here is a photo of the boot screen; nVidia GeForce CARD INFORMATION (lspci -vvv) 01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gateway 2000 Device 3a07 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: Kernel driver in use: nvidia Kernel modules: nvidia_173, nouveau, nvidiafb Thanks for your help/advice.

  Read the article

• What is the "don't force full gpu scalling" configuration in the newest Nvida driver settings?

  - by wild_oscar

  I have a Zotac Ion board on a computer running Linux ad I had the driver version 295.xx. I was trying to run a 1080 video on XBMC and, because playback was a bit sluggish, part of my (unsuccessful) attempt at making it run smoothly was to upgrade the Nvidia driver. The problem is that the computer is connected by HDMI to a Pioneer A/V system - which in turn is connected to the TV (also through HDMI). When I created this set up I didn't get any image on my tv until I Unchecked "force full gpu scaling" in "Flat Panel Scaling". After upgrading the Nvidia driver I no longer have image. Upon investigating, I saw on the release changelog: Removed Flat Panel Scaling configurability in nvidia-settings. Any desired scaling can be configured through the new "ViewPortIn" and "ViewPortOut" MetaMode attributes. I know very little about this, however, so I'm lost. What would the correct configuration be with these new ViewPortIn/Out options to achieve the same result as "unchecking force full gpu scalling"?

  Read the article

• video playback works only as root (ubuntu 13.10 64 bit)

  - by Hybris

  That is, video playback with anything: chrome (html 5), firefox (flash), vlc, totem, smplayer... whatever It works only if the software is started as root otherwise it freezes at the begin Interesting enough, in chrome, you can move the slider to whatever position and see the current frame updated However the video stays stil This started to happen a couple of days ago after an unidentified update Relevant output from chrome run as normal user gives some hint: NVIDIA: could not open the device file /dev/nvidia0 No output coming from firefox or vlc $ ls -l /dev/nvidia0 crw-rw-rw- 1 root root 195, 0 nov 8 21:18 /dev/nvidia0

  Read the article

• La technologie G-Sync de NVIDIA expliquée : la solution de NVIDIA contre les problèmes de synchronisation entre la carte graphique et le moniteur

  Le G-Sync de NVIDIA expliqué Comprenez ce qu'est le G-Sync et comment il fonctionneNVIDIA a annoncé une nouveauté qui pourrait changer la vie des joueurs. En effet, pratiquement tout le monde connaît les déchirements dans l'image que l'on peut apercevoir lorsque la synchronisation verticale est désactivée et NVIDIA apporte une solution sous la forme d'une carte se connectant entre la carte graphique et le moniteur. Mais, revenons sur le problème.Actuellement, l'écran affiche un nombre d'images...

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• NVIDIA Puts Out Its OpenGL 4.0 Linux Driver

  <b>Phoronix:</b> "With NVIDIA having announced the GeForce GTX 470 and 480 graphics cards (formerly known as "Fermi") at the end of March and these graphics cards starting to appear at Internet retailers (see links below), NVIDIA has now put out its OpenGL 4.0 Linux driver."

  Read the article

• RenderAction not finding action method in current controller in current area

  - by Andrew Davey

  I'm creating an ASP.NET MVC 2 (RTM) project that uses areas. The Index action of the Home controller of one area needs to use RenderAction to generate a sub-section of the page. The action called is also defined in the same Home controller. So the call should just be: <% Html.RenderAction("List") %> However, I get an exception: A public action method 'List' was not found on controller 'RareBridge.Web.Areas.Events.Controllers.HomeController'. Note that I'm not in the "Events" area! I'm in a completely different area. If I remove the "Events" home controller, then the exception still occurs but names a different controller (still not the one I want it to call). I've also tried providing the controller name and area to the RenderAction method, but the same exception occurs. What is going on here? BTW: I am using Autofac as my IoC container

  Read the article

• Help: Best way to do a TV-out in 7300GT Nvidia video card?

  - by Martin Ongtangco

  I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

  Read the article

• Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

  - by John H

  mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

  Read the article

• Linux ls[] command

  - by pedro

  ubuntu@ubuntu:/$ ls /dev/tty[15-24]* /dev/tty1 /dev/tty13 /dev/tty17 /dev/tty40 /dev/tty44 /dev/tty48 /dev/tty10 /dev/tty14 /dev/tty18 /dev/tty41 /dev/tty45 /dev/tty49 /dev/tty11 /dev/tty15 /dev/tty19 /dev/tty42 /dev/tty46 what is wrong?

  Read the article

• Solaris mounting partitions

  - by Benco

  I'm trying to mount a partition in solaris 10... bash-3.00# mount /dev/dsk/c0t0d0s3 /data mount: /dev/dsk/c0t0d0s3 is already mounted or /data is busy As far as I know c0t0d0s3 isn't already mounted elsewhere, so what's really going on here? From /etc/mnttab : /dev/dsk/c1t0d0s0 / ufs rw,intr,largefiles,logging,xattr,onerror=panic,dev=7800001285811136 /devices /devices devfs dev=4840000 1285811125 ctfs /system/contract ctfs dev=48c0001 1285811125 proc /proc proc dev=4880000 1285811125 mnttab /etc/mnttab mntfs dev=4900001 1285811125 swap /etc/svc/volatile tmpfs xattr,dev=4940001 1285811125 objfs /system/object objfs dev=4980001 1285811125 sharefs /etc/dfs/sharetab sharefs dev=49c0001 1285811125 /usr/lib/libc/libc_hwcap1.so.1 /lib/libc.so.1 lofs dev=780000 1285811131 fd /dev/fd fd rw,dev=4b40001 1285811136 swap /tmp tmpfs xattr,dev=4940002 1285811137 swap /var/run tmpfs xattr,dev=4940003 1285811137 -hosts /net autofs nosuid,indirect,ignore,nobrowse,dev=4c00001 1285811148 auto_home /home autofs indirect,ignore,nobrowse,dev=4c00002 1285811148 cordb:vold(pid530) /vol nfs ignore,noquota,dev=4bc0001 1285811149 I suspect the problem is not related to the mount point, but rather the disk slice I'm trying to mount: bash-3.00# newfs -v /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3: Device busy

  Read the article

• Is NVIDIA GeForce GTX 480 Video Card Compatbile with a Mac Pro Running Windows 7 Pro 64?

  - by aquat33nfan

  I have a Mac Pro (early 2008) and I'm running Windows 7 Pro (64 bit) natively (i.e., with just Windows installed and no OSX or boot camp) on it. If I buy an NVIDIA GeForce GTX 480 video card, will it work or do I have to buy a card that is Mac-specific (e.g., GeForce GTX 285 'for Mac')? Also, more generally, will Windows video cards work on Intel Macs running Windows (in case I pick a cheaper card)? I can't tell if it matters that a Mac does not have a bios. I searched other boards and I gathered that video cards would work fine because Windows has the proper drivers for them and OSX doesn't and not having the BIOS doesn't make a difference. I found one thread on here that seemed to indicate that as well, but I wanted to make sure. Thanks.

  Read the article

• Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

  Read the article

• Xorg does not see my monitor EDID

  - by sean farley

  Below is the output from my Xorg.0. X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.311] X Protocol Version 11, Revision 0 [ 22.311] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 22.311] Current Operating System: Linux sean-P55-USB3 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 22.311] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=0a34603e-aee9-44d1-8982-a5a5a38c3e4d ro quiet splash [ 22.311] Build Date: 29 August 2012 12:12:33AM [ 22.311] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 22.311] Current version of pixman: 0.24.4 [ 22.311] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.311] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.311] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 17 13:20:45 2012 [ 22.311] (==) Using config file: "/etc/X11/xorg.conf" [ 22.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.311] (==) No Layout section. Using the first Screen section. [ 22.311] (==) No screen section available. Using defaults. [ 22.311] (**) |-->Screen "Default Screen Section" (0) [ 22.311] (**) | |-->Monitor "<default monitor>" [ 22.311] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 22.311] (**) | |-->Device "Default Device" [ 22.311] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.311] (==) Automatically adding devices I have searched all over, and followed lots of dead ends and unanswered questions on this issue. I need to get this monitor recognised so I can use the native resolution of 1600x1200. The Nvidia driver in Windows has no problem with this. The monitor is an old Iiyama HM204DT A. Is there a way of configuring Xorg manually to get these working? I have tried xrandr but this will not work. Output:- sean@sean-P55-USB3:~$ xrandr Screen 0: minimum 8 x 8, current 1152 x 864, maximum 16384 x 16384 DVI-I-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 disconnected (normal left inverted right x axis y axis) Tried Nvidia Xorg.config: sean@sean-P55-USB3:~$ sudo nvidia-xconfig [sudo] password for sean: Using X configuration file: "/etc/X11/xorg.conf". VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Device section "Default Device" must have a Driver line. Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original' Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' How do I insert a driver line? This is a bit of a pain as I want to use my Vectorworks cad program in a WinXP Vbox at 1600x1200 but all virtual drives are restricted to the host screen resolution. Do i need to manually create EIDI info in Xorg? I am slightly confused about how Xorg and Nvidia relate Please help

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >