Search Results

Search found 27308 results on 1093 pages for 'nvidia current dev'.

Page 24/1093 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Ubuntu 12.04 installation on GPT + RAID going into grub rescue

  - by Proy

  I have two 2TB disks. I am installing Ubuntu 12.04 using the alternate version of the server cd. On the partitioning page I have done my partitioning as follows /dev/sda1 - 32 MB - bios_grub /dev/sda2 - 50 GB -raid device /dev/sda3 - 8 GB -raid device /dev/sda4 - Balance full GB - raid device /dev/sdb1 - 32 MB - bios_grub /dev/sdb2 - 50 GB -raid device /dev/sdb3 - 8 GB -raid device /dev/sdb4 - Balance full GB - raid device After this I have setup raid devices /dev/md0 for /(/dev/sda2 + /dev/sdb2) for / ext4 /dev/md1 for swap( /dev/sda3 + /dev/sdb3)for swap /dev/md2 for /home(/dev/sda4 + /dev/sdb4)for /home ext4 The installation finishes it shows that it is installing grub to /dev/sda and /dev/sdb. But once the system reboots it falls into grub rescue mode. on doing ls I can not see the md devices only hd once. I also tried booting into rescue mode with the install cd and doing grub-install /dev/sda and /dev/sdb. What am I doing wrong ? Why is grub2 not detecting the raid revices ? UPDATE: I just did the same steps with Ubuntu 10.04 and it worked perfectly fine. I wiped out the RAID and partitions and everything and did it from scratch. I think the issue is with Ubuntu 12.04 and the way it partitions 2 TB disks

  Read the article

• Best triple head display setup

  - by dgel

  I'm currently running Ubuntu 12.04 with a darn good triple head display setup. I've got a VisionTek 900530 Radeon HD 5450 512MB DDR3 PCI Express video card that has two DVI outputs and one Mini DisplayPort that I have connected to a HDMI adapter. I'm running three identical Asus 1920x1080 monitors that each have a DVI, VGA, and HDMI input. I'm using the xorg-edgers ppa, so I'm using the open source radeon driver version 6.99.99. I tried using the ATI binary fglrx driver, but I wasn't able to get the three monitors working properly- the monitor connected via HDMI / DisplayPort wouldn't run at full resolution. The setup is almost perfect: Compiz runs fine and is quite snappy. I'm not able to use that great compiz feature where you can drag a window to the side of a display and it will half maximize. I occasionally experience display corruption weirdness with Unity and need to restart it. When I use a dropdown menu in LibreOffice it often pops the menu down in another window. For example, if I'm using the center monitor and click the Insert menu, the menu pulls down on the monitor to my right, forcing me to chase it. If I chase down the menu and choose Manual Break, the dialog appears over on my left monitor. This absurdity is mildly entertaining but has lost its novelty. I've decided to build a new system and have spared no expense- latest i7 processor, SSD, etc. I really like the performance of the Nvidia binary drivers, so I put two ZOTAC ZT-40707-10L GeForce GT 440 in the system, figuring I'd have four DVI outputs and an awesome triple (or even eventually quad) head setup. Unfortunately it appears that I didn't do sufficient research before my purchase. It seems that Nvidia TwinView only supports two monitors on one card (I guess that's why they call it TwinView...). I messed around with running two X servers, but I really don't want that- being able to drag windows to any monitor is critical. It doesn't sound like Xinerama is an option because from what I understand it simply doesn't support Compiz. I've seen a BaseMosaic option that can be used with the Nvidia drivers that appears to support an almost unlimited number of heads- unfortunately me cheap little cards don't support it. I'm also not sure whether you'll still have all nice maximizing and snapping that TwinView provides, or whether Ubuntu will only see it as one massive display. I put my old trusty ATI card into my new system and installed 12.10. I'm using the opensource radeon drivers again because even in 12.10 I can't get the fglrx binary drivers to do triple head. Unfortunately, even with an unbelievably powerful system the experience is extremely sluggish (much more so than my experience in 12.04). The menu scattering problem appears to be fixed, but I get a lot of nasty Unity display corruption. So finally, my question is this: What hardware / drivers should I use? I'm willing to buy (almost) any video card(s). I have two PCI-Express 3.0 slots on my motherboard (which has an integrated Intel HD card). I'm willing to use ATI or Nvidia cards and willing to run Ubuntu 12.04.1 or 12.10. I'm not a gamer, but do want beautiful and snappy Compiz effects. Does anyone out there have the perfect triple head setup in 12.04 or 12.10? What hardware / drivers are you using? I have those two Nvidia cards but will probably be returning them unless someone knows a way to use them together for a triple head setup. Since I'm having pretty good luck with a single ATI card providing three displays, should I just buy a beefier one with the hopes that it will fix the horrible sluggishness I'm experiencing in 12.10?

  Read the article

• Why is /dev/rfcomm0 giving PySerial problems?

  - by Travis G.

  I am connecting my Ubuntu box to a wireless readout setup over Bluetooth. I wrote a Python script to send the serial information through /dev/rfcomm0. The script connects fine and works for a few minutes, but then Python will start using 100% CPU and the messages stop flowing through. I can open rfcomm0 in a serial terminal and communicate through it by hand just fine. When I open it through a terminal it seems to work indefinitely. Also, I can swap the Bluetooth receiver for a USB cable, and change the port to /dev/ttyUSB0, and I don't get any problems over time. It seems either I'm doing something wrong with rfcomm0 or PySerial doesn't handle it well. Here's the script: import psutil import serial import string import time sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' gauges = serial.Serial() gauges.port = '/dev/rfcomm0' gauges.baudrate = 9600 gauges.parity = 'N' gauges.writeTimeout = 0 gauges.open() print("Connected to " + gauges.portstr) filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) while(1): usage = psutil.cpu_percent(interval=sampleTime) gauges.write(USAGE_CHAR) gauges.write(chr(int(usage))) #write the first byte #print("Wrote usage: " + str(int(usage))) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) gauges.write(TEMP_CHAR) gauges.write(chr(temp)) #print("Wrote temp: " + str(temp)) Any thoughts? Thanks. EDIT: Here is the revised code, using Python-BlueZ instead of PySerial: import psutil import serial import string import time import bluetooth sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' #gauges = serial.Serial() #gauges.port = '/dev/rfcomm0' #gauges.baudrate = 9600 #gauges.parity = 'N' #gauges.writeTimeout = 0 #gauges.open() gaugeSocket = bluetooth.BluetoothSocket(bluetooth.RFCOMM) gaugeSocket.connect(('00:06:66:42:22:96', 1)) filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) while(1): usage = psutil.cpu_percent(interval=sampleTime) #gauges.write(USAGE_CHAR) gaugeSocket.send(USAGE_CHAR) #gauges.write(chr(int(usage))) #write the first byte gaugeSocket.send(chr(int(usage))) #print("Wrote usage: " + str(int(usage))) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) #gauges.write(TEMP_CHAR) gaugeSocket.send(TEMP_CHAR) #gauges.write(chr(temp)) gaugeSocket.send(chr(temp)) #print("Wrote temp: " + str(temp)) It seems either Ubuntu must be closing /dev/rfcomm0 after a certain time or my Bluetooth receiver is messing things up. Even when the BluetoothError arises, the "connected" light on the receiver stays illuminated, and it is not until I power-cycle to receiver that I can reconnect. I'm not sure how to approach this problem. It's odd that the connection would work fine for a few minutes (seemingly a random amount of time) and then seize up. In case it helps, the Bluetooth receiver is a BlueSmirf Silver from Sparkfun. Do I need to be trying to maintain the connection from the receiver end or something?

  Read the article

• RAID degraded on Ubuntu server

  - by reano

  We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

  Read the article

• HDMI video connection cuts top and bottom borders of screen

  - by Luis Alvarado

  Ok this is an extension of another problem I had with a VGA connection and an Nvidia Geforce GT 440 card. Here is goes the explanation of this particular problem: I have a Soneview 32' TV. This TV has many connections including VGA (First reason I bought it), HDMI (Second reason but did not have a HDMI cable at that time) and DVI. I have had this TV for little over a month now, actually I had it to celebrate the release of Ubuntu 11.10 and started using it exactly on that date (I know too much fan there but hey, I like geek stuff). I started using it with the VGA cable. After 2 weeks I bought an Nvidia GT440 card. The previous 9500GT was working correctly with no problems whatsoever. I installed the GT440 and the first problem that I encountered using this latest card is mentioned here: Nvidia GT 440 black screen problem when loading lightdm greeter. The solution to this problem was to actually disconnect then connect again the VGA cable. This would result in the screen showing me the lightdm screen for my login. If I did not disconnect then connect the cable I could be there forever thinking that there is no video signal. I got tired of looking for answers that did not work and for solutions that made me literally have to install Ubuntu again. I just went and bought a HDMI cable and changed the VGA one for that one. It worked and I did not have to disconnect/connect the cable but now I have this problem when using any resolution. My normal resolution is 1920x1080 (This TV is 1080HD) so in VGA I could use this resolution with no problem, but on HDMI am getting the borders cut out. Here is a pic: As you can see from the PIC, the Launcher icons only show less than 50% of their witdh. Forget about the top and bottom parts, I can access them with the mouse but I can not visualize them in the screen. It is like it's outside of the TVs view. Basically there is like 20 to 30 pixels gone from all sides. I searched around and came to running xrand --verbose to see what it could detect from the TV. I got this: cyrex@cyrex:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 175, current 1920 x 1080, maximum 1920 x 1080 default connected 1920x1080+0+0 (0x164) normal (normal) 0mm x 0mm Identifier: 0x163 Timestamp: 465485 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1920x1080 (0x164) 103.7MHz *current h: width 1920 start 0 end 0 total 1920 skew 0 clock 54.0KHz v: height 1080 start 0 end 0 total 1080 clock 50.0Hz 1920x1080 (0x165) 105.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz v: height 1080 start 0 end 0 total 1080 clock 51.0Hz 1920x1080 (0x166) 107.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 56.2KHz v: height 1080 start 0 end 0 total 1080 clock 52.0Hz 1920x1080 (0x167) 109.9MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 57.2KHz v: height 1080 start 0 end 0 total 1080 clock 53.0Hz 1920x1080 (0x168) 112.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 58.3KHz v: height 1080 start 0 end 0 total 1080 clock 54.0Hz 1920x1080 (0x169) 114.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 59.4KHz v: height 1080 start 0 end 0 total 1080 clock 55.0Hz 1680x1050 (0x16a) 98.8MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 58.8KHz v: height 1050 start 0 end 0 total 1050 clock 56.0Hz 1680x1050 (0x16b) 100.5MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 59.9KHz v: height 1050 start 0 end 0 total 1050 clock 57.0Hz 1600x1024 (0x16c) 95.0MHz h: width 1600 start 0 end 0 total 1600 skew 0 clock 59.4KHz v: height 1024 start 0 end 0 total 1024 clock 58.0Hz 1440x900 (0x16d) 76.5MHz h: width 1440 start 0 end 0 total 1440 skew 0 clock 53.1KHz v: height 900 start 0 end 0 total 900 clock 59.0Hz 1360x768 (0x171) 65.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 48.4KHz v: height 768 start 0 end 0 total 768 clock 63.0Hz 1360x768 (0x172) 66.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 49.2KHz v: height 768 start 0 end 0 total 768 clock 64.0Hz 1280x1024 (0x173) 85.2MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.6KHz v: height 1024 start 0 end 0 total 1024 clock 65.0Hz 1280x960 (0x176) 83.6MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 65.3KHz v: height 960 start 0 end 0 total 960 clock 68.0Hz 1280x960 (0x177) 84.8MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.2KHz v: height 960 start 0 end 0 total 960 clock 69.0Hz 1280x720 (0x178) 64.5MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 50.4KHz v: height 720 start 0 end 0 total 720 clock 70.0Hz 1280x720 (0x179) 65.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.1KHz v: height 720 start 0 end 0 total 720 clock 71.0Hz 1280x720 (0x17a) 66.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.8KHz v: height 720 start 0 end 0 total 720 clock 72.0Hz 1152x864 (0x17b) 72.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.1KHz v: height 864 start 0 end 0 total 864 clock 73.0Hz 1152x864 (0x17c) 73.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.9KHz v: height 864 start 0 end 0 total 864 clock 74.0Hz ....Many Resolutions later... 320x200 (0x1d1) 10.2MHz h: width 320 start 0 end 0 total 320 skew 0 clock 31.8KHz v: height 200 start 0 end 0 total 200 clock 159.0Hz 320x175 (0x1d2) 9.0MHz h: width 320 start 0 end 0 total 320 skew 0 clock 28.0KHz v: height 175 start 0 end 0 total 175 clock 160.0Hz 1920x1080 (0x1dd) 333.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 173.9KHz v: height 1080 start 0 end 0 total 1080 clock 161.0Hz If it helps, the Refresh Rate at 1920x1080 is 60. There is a flickering effect at this resolution using HDMI but not VGA which I imagine is related to the borders cut off issue am asking here. I have also done the following but this will only solve the problem on lower resolutions than 1920x1080 or on others TV (My father has a Sony TV where this problem is also solved): NVIDIA WAY Go to Nvidia-Settings and there will be an option that will have more features if a HDMI cable is connected. In the next pic the option is DFP-1 (CNDLCD) but this name changes depending on what device the PC is connected to: Uncheck Force Full GPU Scaling What this will do for resolutions LOWER than 1920x1080 (At least in my case) is solve the flickering problem and fix the borders cut by the monitor. Save to Xorg.conf file the changes made after changing to a resolution acceptable to your eyes. TV WAY If you TV has OSD Menu and this menu has options for scanning the screen resolution or auto adjusting to it, disable them. Specifically the option about SCAN. If you have an option for AV Mode disable it. Basically disable any option that needs to scan and scale the resolution. Test one by one. In the case of my father's TV this did it. In my case, the Nvidia solved it for lower resolutions. NOTE: In the case this is not solved in the next couple of weeks I will add this as the answer but take into consideration that the issue is still active with 1920x1080 resolutions.

  Read the article

• Configure 27" 2560x1440 for a monitor with corrupt EDID

  - by Aras

  I am trying to get a monitor work with my Ubuntu laptop. The monitor is this cheap 27" Korean monitors which has a 2560x1440 resolution -- and nothing else. Here are some specifications of this monitor: 2560x1440 @60Hz Only one dual link DVI-D input -- no other input port (no HDMI or display port) no OSD no scalar reports corrupt EDID does 2560x1440 @60Hz, did I say that already? Anyways, the monitor works beautifully with my Ubuntu desktop which has an nVidia card with DVI output. However, I am having problem using this monitor with my laptop. After some searching around I found a few posts suggesting to use an active adaptor for mini display port, so I went and bought a mini display to dual link DVI-D adaptor.. When using this adaptor the monitor is recognized by nvidia-settings tool but with incorrect resolution information. As you can see the monitor is incorrectly recognized and there are no other resolution available to set. This post on ubuntu forums and this other post on overclock both suggest that the monitor is reporting corrupt EDID file. I have tried following their instructions, but so far I have not been able to display any image on the monitor from my laptop. The laptop I am using is an ASUS G75VW with a 1920x1080 screen. It has a VGA, an HDMI 1.4a, and a mini display port. The graphic card is an nvidia gforce gtx 660M with 2GB dedicated memory. I am running Ubuntu 12.10 on here which I upgrade from 12.04 a few weeks ago. As I said I have tried several suggestions, including specifying Modeline in xorg.conf and also linking to EDID files I found from those forum posts above. However, I am not sure if the EDID files I found are suitable for my monitor. I think the solution to my problem consist of obtaining the EDID file of my monitor and then fixing it and modifying xorg.conf to force nvidia driver to load the correct resolution. However, I am not sure what steps I need to take to do this. Here is the part of sudo xrandr --prop output that is related to this monitor: DP-1 connected 800x600+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm SignalFormat: DisplayPort supported: DisplayPort ConnectorType: DisplayPort ConnectorNumber: 3 (0x00000003) _ConnectorLocation: 3 (0x00000003) 800x600 60.3*+ I was expecting to see the EDID file in this output as was mentioned in this post, but it is not there. After several hours of tweaking X configurations, I decided it was time to ask for help here. I would really appreciate if someone with experience regarding EDID and X configuration could give me a hand to solve this issue.

  Read the article

• Where to find gtx560Ti driver for ubuntu 12.04?

  - by sam

  I found in this nvidia link : http://www.nvidia.com/object/linux-display-amd64-295.59-driver.html It says Linux x64 (AMD64/EM64T) Display Driver Version: 295.59 Certified Supported: NVS 5400M NVS 310 Quadro 410 GeForce GT 620M GeForce GT 640M GeForce GT 640M LE GeForce GT 650M GeForce GTX 660M GeForce GTX 670M GeForce GTX 675M GeForce GTX 555 GeForce GTX 560 SE GeForce GT 415 GeForce GTX 460 v2 Is that driver support for gtx560Ti? If not ,where is the proper driver? (I don't want to use the driver in ubuntu settings) Thank you~

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• 12.04 "Try Ubuntu without installing" results in graphical artifacts on MacBook

  - by ubuntukeks

  I am trying to bless my MacBookPro 5,3 (Unibody/Core2Duo/Nvidia 9400M+Nvidia 9600M GT) with Ubuntu 12.04 (already got rEFIt running), but every time I select Try Ubuntu without installing, it will lock up and always give me the same coloured graphical artifacts all over the screen. Whether I use a CD-ROM or a USB Stick, it does not change a thing. Is there anything else that can be done or am I stuck for now?

  Read the article

• Why is my card Unity blacklisted with all the requirements fulfilled?

  - by Oxwivi

  The following is the Unity test output: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.30 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity supported: no As you can see, all requirements are fulfilled but my GPU is blacklisted. What can I do about it?

  Read the article

• Unity won't load with proprietary drivers

  - by Nobita

  First time running Ubuntu 11.04 and getting used to Unity, I decided to install proprietary drivers for my Nvidia graphic card. The output of lspci | grep VGA is: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev a1) If I activate the driver that is "recommended", next time I try to login in a Unity session it just changes to the classic. How can that be happening? I attach the screenshoot of my proprietary driver screen:

  Read the article

• Geforce GT240M: How to disable Notebook screen and enable external Monitor

  - by bdr529

  When i attach my Notebook (Nvidia Geforce GT 240M) to my Panasonic-TV via HDMI, both screens are activated. I use Nvidia-Driver Version 260.19.06. I wonder how to deactivate my notebook display automatically or with one Script and switch to the external Monitor when attached. The TV needs an overscan-correction of 100px to display the whole screen. I also want to close the notebook without deactivating the external monitor, what still happens now. Is this possible?

  Read the article

• Geforce(410m with CUDA) screen resolution on Ubuntu 12.04 issue

  - by Marco K

  I made a succesful installation of Ubuntu 12.04 64-bit on my Sony Vaio PCG-71811M. I have a Geforce 410M with CUDA,it seems works fine and i have already installed packages nvidia-current and nvidia-settings at version 302.17 (I think it's the latest in this moment), but my maximum screen resolution is 1366x768(and in the native display settings it's the same thing). How can I switch it to an highest resolution, like 1920x1080?

  Read the article

• Enable Compiz on Alienware M11x R2

  - by user3307

  I want to enable compiz on my Alienware m11x r2 but when I try to I get a message that I have to enable Nvidia propietary drivers and I cant enable them because it will cause problems with next startup because the nvidia is the discrate GPU of my laptop, I had search a little on this here and here. But I seem to not get it working right, if someone can help me I will thank you alot! I have also tried the vga-swticheroo thing with no results at all...

  Read the article

• "Try Ubuntu without installing" results in graphical artifacts on MacBook

  - by ubuntukeks

  I am trying to bless my MacBookPro 5,3 (Unibody/Core2Duo/Nvidia 9400M+Nvidia 9600M GT) with Ubuntu 12.04 (already got rEFIt running), but every time I select Try Ubuntu without installing, it will lock up and always give me the same coloured graphical artifacts all over the screen. Whether I use a CD-ROM or a USB Stick, it does not change a thing. Is there anything else that can be done or am I stuck for now?

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• Custom initrd init script: how to create /dev/initctl

  - by Posco Grubb

  I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

  Read the article

• Can't install libglib2.0-dev

  - by Joachim Pileborg

  Since Handbrake can't be installed in Oneiric, I decided to try and build it from source instead. The build is interrupted because it complains glib is not installed, so I thought I better install the glib development package. But I cant: $ sudo aptitude install -V libglib2.0-dev The following NEW packages will be installed: libglib2.0-dev{b} [2.30.0-0ubuntu4] 0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 1 775 kB of archives. After unpacking 8 831 kB will be used. The following packages have unmet dependencies: libglib2.0-dev: Depends: libglib2.0-0 (= 2.30.0-0ubuntu4) but 2.31.0-0ubuntu1~oneiric1 is installed. Depends: libglib2.0-bin (= 2.30.0-0ubuntu4) but 2.31.0-0ubuntu1~oneiric1 is installed. Internal error: the solver Install(libglib2.0-bin 2.30.0-0ubuntu4 <libglib2.0-dev 2.30.0-0ubuntu4 -> {libglib2.0-bin 2.30.0-0ubuntu4 libglib2.0-bin 2.30.0-0ubuntu4}>) of a supposedly unresolved dependency is already installed in step 237 Aptitude the suggest a solution that involves removing basically all libraries, including libc. How do I install the glib development package?

  Read the article

• Problems when rendering code on Nvidia GPU

  - by 2am

  I am following OpenGL GLSL cookbook 4.0, I have rendered a tesselated quad, as you see in the screenshot below, and i am moving Y coordinate of every vertex using a time based sin function as given in the code in the book. This program, as you see on the text in the image, runs perfectly on built in Intel HD graphics of my processor, but i have Nvidia GT 555m graphics in my laptop, (which by the way has switchable graphics) when I run the program on the graphic card, the OpenGL shader compilation fails. It fails on following instruction.. pos.y = sin.waveAmp * sin(u); giving error Error C1105 : Cannot call a non-function I know this error is coming on the sin(u) function which you see in the instruction. I am not able to understand why? When i removed sin(u) from the code, the program ran fine on Nvidia card. Its running with sin(u) fine on Intel HD 3000 graphics. Also, if you notice the program is almost unusable with intel HD 3000 graphics, I am getting only 9FPS, which is not enough. Its too much load for intel HD 3000. So, sin(X) function is not defined in the OpenGL specification given by Nvidia drivers or something else??

  Read the article

• Video card not detected on Lenovo T410 in Linux

  - by wich

  I have a T410 with an nVidia NVS 3100M, this is not a hybrid system, there is no Optimus. (No option in the BIOS for Optimus, lspci in linux as well as the Windows device manager only show the nVidia) Using lspci I see the GPU as a present device, however, I can not, for the life of me, get any video driver to work that will let me start an X session, every time X craps out with the error (EE) No devices detected. I have tried the nVidia binary blob, (with nvidia-config, made sure no nvidia support in the kernel), I have tried nouveau, I have tried nv, I have even tried generic vesa, nothing will work. When I compare the dmesg that I get when loading the nvidia kernel module, I see that it is missing some lines compared with another system that also has an nvidia card, specifically the line mentioning the GPU name (3100M) is not there. I have checked every option in the BIOS, there is nothing to control except for the BIOS video output port, which is set to the LCD panel. I have no idea anymore what the problem may be, or even how I can diagnose this problem further. Any help will be appreciated.

  Read the article

• Adobe premiere CS5 problem with the display driver

  - by user30179

  This error is really hindering our project. I get an error, it started showing-up June 16th 2010. There are no windows updates at the on the same date as the error, other than (Windows Defender) Seems to happen when working with Image overlays. ERROR: "The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close." We opened the side of the case in the possibility there is an over heating problem. Nvidia Driver ver 8.16.11.9175 (nVidia Quadro FX 1700) I am running: Windows 7 x64 Adobe premiere CS5 Production nVidia Quadro FX 1700 (MRGA14L) 4 Gig ram RAID 10 2 750GB drives Duo core 3.0 6MB L2 Cache This is at least three other people that have come across this error: NVidia Forum EVGA Forum NVidia Forum UPDATE: Having the case open did not help. I also installed New Nvidia drivers now I get a different error: *ERROR:*Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. I ran Windows Update and installed all four updates so now I am waiting to see if the error occurs again. Anything beyond this I am out of options.

  Read the article

• Mount to /dev/sdb1 without password

  - by Jarmo

  I am unable to mount a USB drive (or SD card) to my system without root access. When I plug in a USB drive, it is visible in the left column of Nautilus, but when I click on it to open it, I receive the error message Unable to mount 2.1 GB Filesystem Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/sdb1 I am able to mount the drive using sudo mount -w /dev/sdb1, but this causes problems for operations such as creating startup discs, which requires unmounting and remounting the drive. I suspect this problem may be caused by the fact that when I upgraded from 11.10 to 12.04, I had an SD card plugged in. This caused the system to stall during later startups, as it could not find this drive. I remedied this by editing a line of /etc/fstab to read /dev/sdb1 /media/sdb1 vfat noauto 0 0 However, I am dual booting Ubuntu with Windows XP, and I have no problem mounting the C: drive of the Windows system without root access, so I feel that this is a problem related to the mount point rather than mounting in general.

  Read the article

• A good language for c# dev to expand his mind [closed]

  - by Jan Kratochvil

  I have some free time on my hands and I was thinking about learning a new language. I do not plan to use it in my day-to-day job, but I rather want to expand my way of thinking to get a better sense where the dev world is heading from a language perspective and to don't get stuck in my way when programming by rather try new approaches. I was thinking either a functional language, like Haskell or F# (which is a bit more 'pragmatic from a .NET dev standpoint) or something dynamic (like Python, that in my oppinion has nicer syntax than Ruby). What can you recommend that is enjoyable, at least a bit practical, but most of all, new (from a c# dev perspective). I appreciate any answers.

  Read the article

• /dev/sda1 100% Mysql to blame?

  - by SJP

  I have a an API running that receives raw binaries, processes them, and then stores metadata about the bins in a mysql database. I have been running it for a couple days on a VM. Today the API stopped processing the mySQL commands. After using the command df-h the results were: root@mwdb1:/# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 104G 99G 0 100% / udev 16G 4.0K 16G 1% /dev tmpfs 6.3G 364K 6.3G 1% /run none 5.0M 0 5.0M 0% /run/lock none 16G 0 16G 0% /run/shm /dev/sdb1 5.5T 42G 5.2T 1% /data sda1 is at 100%

  Read the article

• “Disk /dev/xvda1 doesn't contain a valid partition table”

  - by Simpanoz

  Iam newbie to EC2 and Ubuntu 11 (EC2 Free tier Ubuntu). I have made following commands. sudo mkfs -t ext4 /dev/xvdf6 sudo mkdir /db sudo vim /etc/fstab /dev/xvdf6 /db ext4 noatime,noexec,nodiratime 0 0 sudo mount /dev/xvdf6 /db fdisk -l I got following output. Can some one guide me what I am doing wrong and how it can be rectified. Disk /dev/xvda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table Disk /dev/xvdf6: 6442 MB, 6442450944 bytes 255 heads, 63 sectors/track, 783 cylinders, total 12582912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvdf6 doesn't contain a valid partition table.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >