Search Results

Search found 10313 results on 413 pages for 'hardware sharing'.

Page 275/413 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• Does servers to >$1000 really have a memory limit of 4GB?

  - by Sandra

  Hi, I am looking for a server, and when I look at the specs some of the servers can only handle 4GB. Other can handle 8GB or 16GB, and others 64GB. Can that really be true? Is this really a hardware limitation, or are they disabling it in the BIOS, so there is no way to use 16GB on a 4GB supported server? An example is the Dell PowerEdge SC 440. Only 4GB supported, they say. Would Linux allow me to use 16GB on a 4GB server? Sandra

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• Duplicate incoming TCP traffic on Debian Squeeze

  - by Erwan Queffélec

  I have to test a homebrew server that accepts a lot of incoming TCP traffic on a single port. The protocol is homebrew as well. For testing purposes, I'd like to send this traffic both : - to the production server (say, listening on port 12345) - to the test server (say, listening on port 23456) My clients apps are "dumb" : they never read data back, and the server never replies anyway, my server only accepts connections, and do statistical computations and store/forward/service both raw and computed data. Actually, client apps and hardware are so simple there is no way I can tell clients to send their stream on both servers... And using "fake" clients is not good enough. What could be the simplest solution ? I can of course write an intermediary app that just copy incoming data and send it back to the testing server, pretending to be the client. I have a single server running Squeeze and have total control over it. Thanks in advance for your replies.

  Read the article

• best filesystem for an aws s3 like service

  - by gucki

  Hi! I need to build a fault tolerant, highly available key/value storage (no posix, only same functionaluty as S3) using cheap existing hardware. The storage should be able to handle several billions of items. The maximum size of items is around 1GB, most are only several KB. What's the best software/ filesystem for this task? I already had a brief look at mogilefs, mongodb (grid-fs) & glusterfs but I'm not really sure which is stable & fault tolerant enough. The simpler the setup and later expansion the better :). Corin

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Wake network adapter from deep sleep mode

  - by BeatMe

  I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

  Read the article

• Need software to save videos from 4tube.com - to watch the videos smoothly

  - by Harold34

  Isn't there a programs that will capture screen writes at the hardware level? I have tried several Firefox add-ons, and several stand-alone programs, and none of them will save videos from this site. I even paid for Replay Media Catcher, and it didn't work, so I got a refund. (The website for the best Firefox video downloader I have, Downloadhelper, said Replay Media Catcher worked with that site.) I have a slow internet connection, and cannot watch videos smoothly unless I can cache them. This site (4tube.com) doesn't cache, when you restart, it reloads, when you pause it stops - so I need to be able to save the videos to be able to watch them.

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• After low level formatting can microsoft track previously pirated windows installed on pc

  - by Neelabh

  I am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

  Read the article

• Apple shortcuts in Ubuntu

  - by rcourtna

  Hi, I switch between a Mac and Ubuntu often. On my Ubuntu box, I use an Apple Aluminum keyboard. I'm interested in Apple's "command" key: ? (I'm not concerned about the hardware control keys) cmd-T opens a browser tab cmd-C, cmd-V for copy/paste, especially in a terminal window control-c maintains the same meaning in terminal (abort) Just switching the control & command keys in Ubuntu would almost get me there, except for the special behaviour of the keys a terminal (Terminal is my most frequently used app). Has it been done? edit: using Gnome, not KDE

  Read the article

• Where should I go to learn about networking? [closed]

  - by Ollie Saunders

  I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

  Read the article

• GNU/Linux: SAS-disk detected as /dev/sg7 - not as /dev/sdb

  - by Ole Tange

  I have just installed a SAS disk into a Debian server. It was detected correctly and everything was fine. Then I moved the SAS disk to a different Debian server, the same hardware model and running same version of Debian, but here the SAS disk is detected as /dev/sg7 and not /dev/sdb. smartctl -a /dev/sg7 works fine, but fdisk and cat hang. I tried putting the SAS disk in another slot: Same problem. How can I force the SAS disk to be detected as /dev/sdb? # uname -a Linux maxwell 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux

  Read the article

• Fullscreen Video stutters on second monitor laptop

  - by nobrandheroes

  Fullscreen video on my new 1080p monitor is choppy when it comes from my laptop. The same video plays when not full screen. This goes for all video(Flash/MKV, etc), regardless of video resolution. I have an ATI Mobility Radeon HD 4200 Series card in my Thinkpad Edge, Turion X2 2GHz. The computer plays 1080p fine. Things I've tried: Updating Drivers Switching cables Turning Hardware Acceleration Changing video players process priority Rebooting Turning of laptop screen Turning off unused processes Nothing Works. What is the likelyhood that my laptop cannot power a 1920x1280 display?

  Read the article

• High CPU usage on Linux machine

  - by user305210

  I have a piece of java code running on two different machines, but on one of the linux machines, the code uses alot of CPU (close to 100% cpu usage). On the other machine the same code uses less cpu (under 3 to 4%). The machine where cpu usage is high, is a more powerful machine, more CPU and and more memory. This has started happening recently and performance on the machine with high cpu usage has degraded significantly. I am wondering if anyone has any ideas why something like this could happen, possible causes behind this etc. any guesses? No recent changes in hardware were made, no recent code updates... Thank you.

  Read the article

• Ubuntu server failing daily

  - by deanvz

  Symptoms: Server becomes unresponsive - Increase in load, all services stop Loss of connectivity - Ping/SSH Flush MySQL hosts after reboot - As MySQL refuses new connections Intermittent Apache crashes Generally happens early morning hours - 2 days of the week are however excluded Changes made: Updated the OS - to Ubuntu 10.04.4 LTS Not sure if the MySQL server was also updated in the process Current MySQL version - mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (x86_64) using readline 6.1 Updated Plesk from 10.4.4 Update #47 to 11.0.9 Update #23 Rebooted on almost daily basis All crons stopped for the times corresponding to the server crashes Created a MySQL log to monitor the lock times on queries Possible causes: Failing hardware Incorrect software configuration (MySQL, Apache etc) Responsibilities: Small webserver Runs our billing system - WHMCS Responsible for CRONs Bulk-email solution - No delivery times coincide with server crashes Proposed solutions: Move machine over to VM Format and restore the Plesk server backup and take it from there? Side notes: Seems to be a general Apache failure across all our linux servers - Intermittent problem Are we doing something fundamentally wrong in the Apache config? (I understand that this is a secondary question, just making sure that it isnt possibly holding any relevance)

  Read the article

• OpenVZ multiple networks on CTs

  - by picca

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• What are the "software" requirements for a 3D video?

  - by Diogo Rocha

  Today, looking for the technical explanations about MPEG4, I saw that it can implement the VRML rendering for a 3D video. This makes me wondering about the "software" requirements to make or to see a 3D video. I mean, assuming that I have all the "hardware" requirements(3D monitor, VGA, 3D-camera, etc), what should I need to make and see 3D videos looking over the "software" side? Must I need to make it on MPEG4 instead MPEG1 or MPEG2 because of the VRML support? May I need a specifc 3D codec to open and see 3D videos?? Until today, I believed that a 3D video was just a regular/ordinary video composed of 2 "overlapping layers". PS: This is the first time I'm researching about technical explanations/references about MPEG standards and 3D videos, any help or basic explanations will help.

  Read the article

• Unlocking AMD Phenom II X2 550 Black Edition cores - what are the risks?

  - by Vilx-

  I've got the above mentioned CPU and a GigaByte GA-MA790XT-UD4P motherboard, which should be capable of unlocking the extra two cores - if I'm lucky and they're not faulty. The Internet is full of instructions on how to do that. What I don't have is spare money to buy new hardware if I brick something. What are the risks when attempting to do this? Is it completely safe, or can I be left with an expensive pile of junk? What should I keep in mind when doing so? Bigger cooler maybe (I'm running with the default box cooler)? Should I lower the frequencies too? I've never done any OC before.

  Read the article

• How to disable Microsoft eHome MCIR Keyboard and company?

  - by AndrejaKo

  Hi! I'm and unlucky owner of and Acer 7720G laptop which, like many in its category, has receiver for a proprietary infra red remote control device (which I did not receive with my laptop!) . Now my problem is that the receiver is detected as Microsoft eHome MCIR Keyboard, Microsoft eHome MCIR 109 Keyboard and Microsoft eHome Remote Control Keyboard keys. My problem is that this driver has incompatibilities with some programs I use like for example DosBox. When these devices are installed, they cause DosBox to incorrectly detect some keyboard buttons. The workaround is to remove or disable the 3 hardware devices. Unfortunately, I the disable option is grayed out and when I delete them, they are reinstalled on next restart. Is there any way to hack windows in order to prevent their installation? I was thinking about locating the drivers these devices use, but they are buried somewhere in windows installation and I don't have enough experience to find them, so I'm asking you for help.

  Read the article

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• Disabling a touchpad in Windows

  - by Shamaoke

  I want to permanently disable a touchpad in Windows running on my laptop, since firstly, I use a mouse, and secondly, when I work, I often touch it accidentally what causes definite inconviniences. I tried the following approaches to disable it but with no result: Turned it off through BIOS — there's no such function there; Turned it off through the touchpad configuration utility — there's no such function there; Turned it off through the device manager — the disable button is inactive; Turned it off through a hotkey (Fn + F1 in my case) — the hotkey doesn't work; Uninstalled the proprietary driver — Windows automatically downloaded the standard driver; Uninstalled the standard driver and turned off the automatic driver download function (Win + R ? "systempropertiesadvanced" ? Hardware ? Device Installation Settings) — all the same, Windows downloaded and installed the driver. How can I disable a touchpad? Windows 7; the Alps touchpad.

  Read the article

• MySQL-5.5.10 - Lost connection to MySQL server during query (Both Web Clients and MySQL Slaves)

  - by kwiksand

  We've just upgraded our existing MySQL5.1 DB servers to newer (much better) hardware with MySQL 5.5, and things have been going mostly smoothly for almost 6 weeks. Just the last few days, I've noticed a few errors, such as: From a MySQL Slave: [ERROR] Error reading packet from server: Lost connection to MySQL server during query ( server_errno=2013) Or From Apache/Other: Lost connection to MySQL server at 'reading initial communication packet', system error: 110 At one point this evening, many webnodes reported this error for a three minute period (many such reports as this was in a busy period). However, the issues don't appear to correspond with any times of extreme load. For all intents and purposes, the connection/thread load on MySQL is at a normal rate (between about 10 and 40 connected threads), and Web load has been a LOT higher at times over the last few weeks. Could there bee other reasons for these connection errors, that I'm not seeing?

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Links to detailed instructions on building a DIY NAS

  - by Kaushik Gopal

  I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by user27977

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >