Search Results

Search found 35444 results on 1418 pages for 'lock down computer'.

Page 326/1418 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• Macbook pro asks me to "Service Battery"

  - by Uwe Honekamp

  A couple of weeks ago I checked the battery and at that point in time (after 160 load cycles) it still had a capacity of 5000 mAh. Today, my 2006 macbook pro tells me via the battery menu to "Service Battery". According to Coconut Battery the current capacity is only 1590 mAh. The corresponding help text suggests contacting an Apple Authorized Service Provider (AASP) to have the computer checked. Before I decide to throw money at the AASP I'd like to understand what the AASP could possibly do to eliminate the problem. Isn't it more likely that the battery simply broke at 160 cycles and needs to be replaced? Are there any means by software or firmware to influence battery behavior? Of course, the computer hardware might be broken but how could this result in the described effect? And yes, I'm currently trying a calibration cycle but I have some doubts that it will save the day.

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• Copy wrongs and Copyright

  - by Tony Davis

  Recently, a Chinese blog website copied, wholesale and without permission, a Simple-Talk article on troubleshooting locking and blocking. Our initial reaction was exasperation and anger, tempered slightly by the fact that there was, at the top, a clear link to the original, and the book from which it was extracted. On the day the copy was posted, our original article saw a 30K spike in visits, so the site clearly has a substantial following! This made us pause for thought. Indeed, we wondered whether it might not be more profitable, and certainly more enjoyable, to notify the offender of similar content and serve a "put up" notice, rather than the usual DMCA "take down" . The DMCA request, issued to protect our and our authors' assets, is a necessary but tiresome, chore. So often, simple communication and negotiation could have averted the need for it. We are, after all, in the business of presenting knowledge, information and help to the SQL Server Community. If only they had asked! Of course, one's attitude changes according to the motivation behind the copying of content. One of the motivations seems to be pure vanity; they do it to try to enhance their CV, or their company's expertise, by pretending to expertise they don't possess. There is a class of plagiariser, however, that is doing it purely for money, getting advertising revenue by attracting hapless readers to their site. Not content with stealing content, sites can invest in services that provide 'load-testing' for websites that is so realistic that even the search engines can be fooled. Stolen content, fake visitors, swindled advertisers. Zero-tolerance is really the only way of dealing with plagiarism, and action will only be completely effective once Bing, Google, and the other search engines strike out from their listings the rogue sites that refuse to take down plagiarised content. It is, after all in everyone else's interests. Cheers, Tony.

  Read the article

• Laptop Function Key Dysfunctional

  - by Kanini

  My laptop has Windows Vista installed in it. Everytime, I switch on the computer, the function key seems to be enabled automatically. So, when I press i, 5 is displayed and so on and so forth. Now, I have checked and ensured that Function is key is not locked due to a faulty keyboard or coke spilling on it and suchlike. I am able to get out of it with the following key combination Fn + Ctrl + Ins (Num Lk) However, the next time I switch on my PC, the Function key is automatically enabled. Also, if my computer goes to sleep mode and comes back, it is enabled again. Anything that I can do to change this behaviour?

  Read the article

• Windows Vista to Windows 7 Gbit LAN slow file copy

  - by ashgromnies

  I have two computers with gigabit LAN, one running Windows 7 and the other running Vista. I have a D-Link DIR-655 router, with gigabit LAN ports. I created a shared directory on the Vista computer, mapped it as a network drive on the Win 7 computer, and tried copying a 2 GB file... and it's going at 900 KB/s Yep... 900 kilobytes per second, about 7 Mb/s. Why so slow? Any ideas?

  Read the article

• Proxification rulte for System process

  - by kseen

  I'm trying to configure Microsoft Visual Studio 2010 remote debugging and ran into issue: while connecting to remote computer running MSVSMON, client computer sends SYN request for connection. It makes it under the System process (as I see it in TCPView). As every network apps should be configured to use proxy in our network, I'm trying to add devenv.exe to proxification rules to make its traffic goes thru LAN's proxy server. It doesn't help. So my question is how can I make that low-level-system traffic will go through local area network proxy server?

  Read the article

• Powerbook G4 unresponsive on wake?

  - by David

  I have a Powerbook G4 17" and I recently updated to the Mac OS 10.5.8 and got a monitor. I put it to sleep by closing the lid and sometimes it resumes normally and sometimes it doesn't. It doesn't matter if it's on sleep for a day or 10 minutes, it just happens randomly. It wakes up, but the screen doesn't flash blue for a few seconds like it normally would, indicating that it found the second monitor. It just wakes up, and a picture appears on both screens and the mouse moves, but nothing responds. The only way I can make it work again is by holding down the power button until it shuts down and then turning it on again. this frustrating because then I have to reopen all my programs and Safari tabs. I tried resetting the PMU by unplugging everything and taking out the batter, then holding the power button for five seconds, but it has the same problem no matter what I do.

  Read the article

• Can connect to DNS addresses typed in the URL but not by IP addresses

  - by Ben

  I just changed over my modem to bridged mode, and changed my wireless router to PPPoE. My PC IP address is reserved and forwards port 80 to my computer's IP address based on my MAC address. I have a problem, however. I cannot access my local webserver by public IP address or my router 192.168.0.1 wirelessly from any other computer or iPad. I can, however, connect by this PC which is connected to the wireless router via ethernet. Via wireless, it says it cannot connect, however DNS addresses work (e.g. google.com, etc.) Any ideas?

  Read the article

• mpirun -np N, what if N is larger than my core number?

  - by Daniel

  Say I have a 4-core workstation, what would linux (Ubuntu) do if I execute mpirun -np 9 XXX Q1. Will 9 run immediately together, or they will run 4 after 4? Q2. I suppose that using 9 is not good, because the remainder 1, it will make the computer confused, (I don't know is it going to be confused at all, or the "head" of the computer will decide which core among the 4 cores will be used?) Or it will be randomly picked. Who decide which one core to call? Q3. If I feel my cpu is not bad and my ram is okay and large enough, and my case is not very big. Is it a good idea in order to fully use my cpu and ram, that I do mpirun -np 8 XXX, or even mpirun -np 12 XXX. Q4. Who decides all of these effciency optimization, Ubuntu, or linux, or motherboard or cpu? Your enlightenment would be really appreciated.

  Read the article

• MAC and PC problems on home network

  - by tombull89

  Hello! At home we have a wireless router that my family want to use. We have our main computer physically connected to the router, and my laptop is connected wirelessly. When the network is like this then it is faultless. However, when my brother introduces is Apple MAC into the equation, both my laptop and the family machine gets all sorts of problems, primarily long load times and timeouts. The MAC, however, works fine. I think I've read something here or SF about a MAC continusly pinging a router which times it out, but I've not found any solution so far. Router: Belkin F5D7634uk4A-H Home Computer: XP SP3 My Laptop: Windows 7, Ultimate Mac: 13" Macbook Pro, Snow Lepoard

  Read the article

• Sysadmin Nightmares – Server Room Disasters [Videos]

  - by Asian Angel

  There you are, looking at a pristine server room when disaster suddenly strikes! Whether it is fire, floods, or other causes you will feel sympathy for the sysadmins involved when watching this collection of seven server room disasters that Wired has put together. You can view the other six videos in the collection by visiting the Wired post linked below… Server Snuff: 7 Videos of a Sysadmin’s Worst Nightmares [via Fail Desk] HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• Save all music files in a VLC xspf playlist to another folder

  - by Parto

  I have a VLC playlist (.xspf) of over a 100 songs all scattered all over my computer. I'm looking for a way to save this playlist and all it's songs to another folder - flash drive, external drive or just a different location in my computer. How can I do this? EDIT The xspf playlist is in XML and is such a format: <?xml version="1.0" encoding="UTF-8"?> <playlist xmlns="http://xspf.org/ns/0/" xmlns:vlc="http://www.videolan.org/vlc/playlist/ns/0/" version="1"> <title>Playlist</title> <trackList> <track> <location>file:///home/subroot/Music/3%20Days%20Grace%20-%20Wake%20Up.mp3</location> <title>Wake Up</title> <creator>3 Days Grace</creator> <album>Three Days Grace</album> <trackNum>10</trackNum> <annotation> </annotation> <duration>206036</duration> <extension application="http://www.videolan.org/vlc/playlist/0"> <vlc:id>0</vlc:id> </extension> </track> . . [Many more tracks here] . </trackList> <extension application="http://www.videolan.org/vlc/playlist/0"> <vlc:item tid="0"/> . . [Other id's here] . </extension> </playlist>

  Read the article

• Issues connection to Ubuntu via PuTTy

  - by user1787262

  I'm not sure this is the appropriate stack exchange site to post this question on. If not, please flag this for migration. I am trying to use PuTTy ssh into my ubuntu machine which is wirelessly connected to the same network. I originally ran ifconfig to get my ubuntu machines private network IP address. I then verified that ssh was running, I even ssh'd into my school network and then into the ubuntu machine itself. No problems yet. On my windows 8 machine I ran ipconfig to get my private network IPv4 address. I then pinged my ubunty machines IP and 100% of packets were received. I figured, "OK we are ready to use PuTTy to connect to my Ubuntu Machine". Keep in mind this was my first time using PuTTy. I tried entering the IP of my ubuntu machine in the PuTTy Config GUI but I got a connection timeout. At this moment I don't really know what's going on, SSH is running on port 22 of my Ubuntu machine and I can ping the machine why is it not connecting? (I tried [username]@ip too). So I went on my Ubuntu machine and ran nmap -sP 192.168.0.1/24 and found that my windows machines IP did not show up, the host is down. I'm at a lost in something I am not very familiar with. Would anyone be able to help me or direct me to some resources that would trouble shoot my problem? Thank you EDIT (ADDITION): tyler@tyler-Aspire-5250:~$ nmap -v 192.168.0.123 Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 01:56 MDT Initiating Ping Scan at 01:56 Scanning 192.168.0.123 [2 ports] Completed Ping Scan at 01:56, 3.00s elapsed (1 total hosts) Nmap scan report for 192.168.0.123 [host down] Read data files from: /usr/bin/../share/nmap Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 3.14 seconds tyler@tyler-Aspire-5250:~$ nmap -Pn 192.168.0.123 Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 01:56 MDT Nmap scan report for 192.168.0.123 Host is up (0.022s latency). Not shown: 998 filtered ports PORT STATE SERVICE 2869/tcp open icslap 5357/tcp open wsdapi Nmap done: 1 IP address (1 host up) scanned in 72.51 seconds

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• How can I auto-connect to a WPA2 Enterprise network?

  - by Demetri

  I would like my computer to automatically connect to a WPA2-Enterprise network as soon as it boots whenever the network is available, without any action needed by me. The computer already offers to connect, and even remembers the password, but I must still hit 'Enter' to connect. Also, connection does not occur if my login is at the terminal. I would like to automatically connect every time I login, no matter how I do so, unless a more preferred network is available. What is the best way to do this? I am running Fedora 19. A shell script that can be invoked at the terminal would be preferred. Connecting even if the Gnome-desktop has not launched is a must.

  Read the article

• How to switch sound-drivers, and to which? [AMD] Hudson Azalia Controller

  - by Anders Martini

  System settings/sound does not open, freezes and I have to force close. Speaker symbol with volume control does not open scroll-down menu, and there is no sounds. Many people have problems with Hudson Azalia in Ubuntu, but I found no working solution. I don't really understand much of this, but here are some more details: aplay -l : **** List of PLAYBACK Hardware Devices **** (after running this one, it starts some kind of process that doesn't get any results, and doesn't stop, terminal has to be shut down) lspci -vnn | grep -iA5 audio: 00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Device [1002:9902] Subsystem: Hewlett-Packard Company Device [103c:184c] Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f0444000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel -- 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:184c] Flags: bus master, slow devsel, latency 32, IRQ 54 Memory at f0440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel It seems to me that I'm currently running hda Intel drivers on my AMD Hudson Azalia soundcard. I can't see what drivers this soundcard uses. Do I need any additional drivers for my soundcard, and where would I find them?

  Read the article

• Windows 7 can't connect to via ethernet to Airpot Extreme

  - by Mr AJL

  I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

• IIS won't start

  - by doekman

  When I startup my computer, pages from my local webserver (IIS) won't load. In the event viewer(System log) I get the error below. The only way I get IIS to work again is to issue an iisreset.exe. I have Windows XP. Any ideas to fix this? Event Type: Warning Event Source: W3SVC Event Category: None Event ID: 36 Date: 27-4-2010 Time: 10:30:47 User: N/A Computer: NLD4P4Z2J Description: The server failed to load application '/LM/W3SVC'. The error was '8007045b'. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• How to repair the boot selection on grub?

  - by Zignd

  I had installed on my computer as a dual-boot: Debian Squeeze and Windows XP, so I decided to install Windows 8 just to test and then I would remove it and install in its place Debian Wheezy as dual-boot with Windows XP, that was already installed. During the Debian Wheezy installation, I deleted the Windows 8 partition to install Debian W. on its place. The problem is, that after the installation finished I rebooted the computer and on the grub menu was written: Debian Wheezy and Windows 8 (loader) - this Windows 8 (loader) is a boot manager as grub, and after the Win8 installation I was capable of choose between Win8 and WinXP. And when I select Windows 8 (loader) it says the Windows 8 is corrupted and is not possible to boot Windows XP. So, after that, I would like to know, how can I get Windows XP on the grub menu? Because I know its there (the Windows XP), but I can not boot it from grub. Observation: I already tried update-grub, but it only finds Debian W. and Windows 8.

  Read the article

• Skype message sync and notifications - Windows 8

  - by Raykud

  The problem is that my messages don't seem to sync and neither do I get notifications from the Windows Store App. I have both, the desktop program and the Windows Store App, the problem is that whenever someone messages me I do not receive a notification of the App but I get one from the desktop program. The Skype app is running in the background and does not have disabled the notifications neither have turned on sleep notifications. I have to manually open the app and moreover, open the chat window of the one who is talking to me, then wait like 10 minutes and then the chat will get syncronized. in short: Notifications don't work even: if computer unlocked and Skype is running in background if computer unlocked and Skype is running in foreground These doesn't seem to help: Reboot doesn't affects skype. Having only the App opened. Uninstalling/reinstalling Is there a way to fix this? or is this an issue with the Skype app in Windows 8?

  Read the article

• SQL SERVER – Function to Round Up Time to Nearest Minutes Interval

  - by pinaldave

  Though I have written more than 2300 blog posts, I always find things which I have not covered earlier in this blog post. Recently I was asked if I have written a function which rounds up or down the time based on the minute interval passed to it. Well, not earlier but it is here today. Here is a very simple example of how one can do the same. ALTER FUNCTION [dbo].[RoundTime] (@Time DATETIME, @RoundToMin INT) RETURNS DATETIME AS BEGIN RETURN ROUND(CAST(CAST(CONVERT(VARCHAR,@Time,121) AS DATETIME) AS FLOAT) * (1440/@RoundToMin),0)/(1440/@RoundToMin) END GO Above function needs two values. 1) The time which needs to be rounded up or down. 2) Time in minutes (the value passed here should be between 0 and 60 – if the value is incorrect the results will be incorrect.) Above function can be enhanced by adding functionalities like a) Validation of the parameters passed b) Accepting values like Quarter Hour, Half Hour etc. Here are few sample examples. SELECT dbo.roundtime1('17:29',30) SELECT dbo.roundtime1(GETDATE(),5) SELECT dbo.roundtime1('2012-11-02 07:27:07.000',15) When you run above code, it will return following results. Well, do you have any other way to achieve the same result? If yes, do share it here and I will be glad to share it on blog with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL DateTime, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Volume key occassionally changes relative volume in mixer

  - by bobobobo

  I find this a bit of a nuisance but I usually use the "volume up/down" key on my Microsoft ergo 4000 to change the volume of my system. The problem I'm experiencing is every so often, the volume of Winamp goes way down relative to the other apps in the mixer: So I don't always notice this right away, suddenly I can't hear Brandy warbling. And that makes me sad. Or mad. Or both. But it's a nuisance - is there a special key combination I need to avoid pressing to stop the mixer from imbalancing? Is there a way to disable this "app specific" mixer, because it is completely useless to me.

  Read the article

• Server freezes at XX:25

  - by Karevan

  We've ordered a 50 euro/month server on hetzner.de, it has debian OS. The problem is that server is freezing in random time of the day and nothing appears in log. Only hardware reboot helps. Part of the log file while it was freezing: Aug 17 22:38:26 Debian-60-squeeze-64-minimal pure-ftpd: ([email protected]) [INFO] New connection from 95.211.120.220 Aug 17 22:38:26 Debian-60-squeeze-64-minimal pure-ftpd: ([email protected]) [INFO] Logout. Aug 17 22:39:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22828]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 17 23:09:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22835]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 17 23:17:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22842]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 17 23:39:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22847]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: imklog 4.6.4, log source = /proc/kmsg started. Aug 18 09:47:47 Debian-60-squeeze-64-minimal rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1229" x-info="http://www.rsyslog.com"] (re)start Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5$ Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/md2 ro As you can see, it appears only the fact of starting. No. theres no way to look in server's console right after when it freezes, sadly. Datacenter supporters do not really want to help about that. Server has been installed 30th july, times and dates of freezes are down there: 6 august, 0:25 18 august, 2:27 21 august, 1:25 26 august, 23:26. We decided that freezing around ??:25 isn't a hardware fault, and decided to reinstall the OS. Later, 31 august, our admin backed up all files, reinstalled Debian, and restored the backup. But then, 7 september, server went down again, at 5:05. We thought it was related to Anyone else experiencing high rates of Linux server crashes during a leap second day? and turned ntp off. But then the server went down twice again, 21 september, 17:29 and 24 september, 20:27. I called all linux admins I knew to help with solving it and they said everything is fine about configuring OS and it could be hardware only. But they dont know why it always freezes at XX:25-30. Maybe some of you know about something related to that?

  Read the article

• Encrypted off-site data storage

  - by Dan

  My business has a rather unique problem. We work in China and we want to implement a file server paradigm which does not store any files locally, but rather in a server overseas. Applications would be saved onto our local machines, but data would be loaded directly into memory from the cloud, e.g. I load a docx into word at the beginning of the day, saving periodically to the cloud as I work on it, and turn off my computer at night, with nothing saved locally. Considering recent events, we worry about being raided by the Chinese authorities, and although all our data is encrypted, it would not be hard for the authorities to force us to give up the keys. So the goal is not to have anything compromising physically in China. We have about 20 computers, and we need an authenticated, encrypted connection with this overseas file server. A system with Active-Directory-like permissions would be best, so that only management can read or write to certain files, or workers can only access files that relate to their projects, and to which all access can be cut off should the need arise. The file server itself would also need to be encrypted. And for convenience, it would be nice if this system was integrated with each computer's file explorer (like skydrive or dropbox does, but, again, without saving a copy locally), rather than through a browser. I can't find any solution online. Does anyone know of a service that does this? Otherwise I'll have to do it myself (which kinda sounds fun, but I don't really have the time), and I'm not sure where to start. Amazon maybe. But the protocols that offices would use on their intranet typically aren't encrypted; we need all traffic securely tunneled out of the country. Each computer already has a VPN to a server in California, but I'm unsure whether it would be efficient to pipe file transfers through it. Let me know if anyone has any ideas. And this is my first post; feel free say whether this question is inappropriate/needs to be posted elsewhere.

  Read the article

• How to restore default iPod playlists on Amarok?

  - by obvio171

  I wanted to "reset" the collection on my iPod and ended up accidentally deleting, through Amarok, all the playlists, including the default ones like "Most Played" and "Highest Rated". Since these are dynamic playlists with a special meaning for iPod, I don't think creating new, normal playlists with the same name will bring their special behavior back. How do I restore them with the same dynamic functionality? Is there a way to do that on Amarok? Rhythmbox? GTKPod? Command line? P.S.: not entirely sure what the policy about iPod questions are, but this one in particular seems to me to be very computer-related because, although it's about interfacing with a device, everything has to be done on my computer, using standard PC libraries/programs, etc. If it's still off-topic, please point me to where I could post it.

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >