Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 336/740 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

  • Windows Virtual Machine not seen by host (Mac OS X) using VMWare Fusion

    - by Malkuth
    Hi, I installed Windows XP with VMware Fusion on my MacBook and while internet works, Windows can ping the Mac, etc. from the Mac or any other machine in the network we can not see the Virtual Machine. In between, I use bridged option and obtain the the VM's IP dynamically; tried also static assignment from the free addresses but the problem persisted. Any ideas what is wrong?

    Read the article

  • wrt54gl reboots; troubleshooting steps?

    - by Bill
    I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

    Read the article

  • How do i use a USB wifi device properly?

    - by acidzombie24
    I'll just say a few random things One usb wifi device i notice only worked when it plugged into my usb hub Another one worked but couldnt get full speed. It came with an extention cord and when i had it a few feet away i was able to (usually) get full speed I had a wifi card in a tower in the past and just about all laptops have it built in How do i use a USB wifi adapter properly? The first device didnt come with an extention cord and made no mention of bringing it away from the computer. When someone else tested the device he said he was getting full speed while it was plugged into his tower so i was pretty surpised. How do i use USB wifi devices properly?

    Read the article

  • How do I increase my home's bandwidth?

    - by Derek
    I just mistakingly posted this on Stack Exchange but don't know how to delete it... Anyway, I was thinking of building a home server to use instead of renting a VPS, because in the long run it would be cheaper. What I'm concerned with is the bandwidth limit of my house. I know when I'm downloading something off the internet, if I download at high speeds the rest of the computers connected to my router will become slower. Is there any way to avoid this? There are other cable outlets in my house, will connecting a modem and router there avoid this problem?

    Read the article

  • Disable (or switch off) a network interface on windows but keep the "plug and play"

    - by Leandro
    I'm looking for a good workaround to do this on Windows 7 and Windows XP: Disable or make ineffective the network interface (ETH, WIFI, any NIC). If the user connect his ETH cable, the network interface enable again. Important Notes to take care: I'm working with wmic on Win7 (through the command line) I'm working with devcon on WinXP (through the command line) I'm specifically working with the .NET Framework 2.0 on C# but this is just for informational purposes. I know that an event won't help me to detect it (if there is a way or workaround to do this I don't know it). The real problem is that when I disable the NIC, I can't know if the user connects his cable or has a wired network. This is why I am looking for a workaround. I'll treat suggestions as answers if no direct answer exists. I'll provide any extra detail necessary.

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

    Read the article

  • NFS performance troubleshooting

    - by aix
    I am troubleshooting NFS performance issues on Linux, and I'm looking at the following nfsiostat output: host:/path mounted on /path: op/s rpc bklog 96.75 0.01 read: ops/s kB/s kB/op retrans avg RTT (ms) avg exe (ms) 86.561 1408.294 16.269 0 (0.0%) 34.595 89.688 write: ops/s kB/s kB/op retrans avg RTT (ms) avg exe (ms) 10.113 326.282 32.265 0 (0.0%) 19.688 72446.246 What exactly is the meaning of avg RTT (ms) and avg exe (ms)? avg exe for writes is 72 seconds(!) -- would you say this is abnormal and, if so, how do I go about troubleshooting this further? I'm using NFS over TCP. Both the client and the server are on the same GigE LAN.

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    Hi, I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • Can I be a wireless server WITHOUT offering internet?

    - by Kenny Hendrick
    I would like to pull into a truck stop and offer a folder of free documentaries to quell some of the ignorance LOL I run Linux ";-) Very happy to have made that switch by the way...and have an internal wireless in the laptop but my bus has an antenna on the roof which I connect via usb to create a wireless signal (this is the one I'd like to focus on since it will offer the most reach to all those truckers out there. My question is this. I'm running apache2 and have a bunch of videos tossed into the www folder and can access it locally and would like others that frown on paying to use the truckstops slow internet service and would like an alternative by simply logging onto me and getting the narrow content I offer freely without passwords and the like. Has anyone a good means of doing this? p.s. I've done this in the past but am getting old and forgetful (my crutch)

    Read the article

  • outgoing DNS flood targeted to non-ISP hosts

    - by radudani
    Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform. My question is not about the effects of the flood, but about the nature of the source of it. Is this some known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me. Thank you for any hint. 14:40:10.115876 IP 192.168.7.42.4122 > 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.115943 IP 192.168.7.42.4124 > 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116015 IP 192.168.7.42.4126 > 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116086 IP 192.168.7.42.4128 > 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116154 IP 192.168.7.42.4130 > 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116222 IP 192.168.7.42.4132 > 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116290 IP 192.168.7.42.4134 > 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116358 IP 192.168.7.42.4136 > 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116430 IP 192.168.7.42.4138 > 67.228.0.181.53: S 930184999:930184999(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116498 IP 192.168.7.42.4140 > 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116566 IP 192.168.7.42.4142 > 67.228.0.181.53: S 546074424:546074424(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116634 IP 192.168.7.42.4144 > 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116702 IP 192.168.7.42.4146 > 67.228.0.181.53: S 668634627:668634627(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116769 IP 192.168.7.42.4148 > 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.117360 IP 192.168.7.42.4111 > 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 > 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 > 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OS>M-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 > 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 > 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 > 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 > 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 > 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 > 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 > 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 > 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 > 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 > 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 > 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 > 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

    Read the article

  • Macports Apache Slow to Start/Stop

    - by moranjk
    I am running OSX 10.8.5 (Mountain Lion) with Apache2 from MacPorts for local development, and just recently I noticed it is taking almost a minute to restart Apache. I wouldn't think anything of it except it normally would restart in less than a second. I had all but given up Googling when I noticed that if I turned off the WiFi (I haven't tried hardwire yet) Apache would restart just as it use to. What would cause Apache to take longer to start when I am connected to the LAN? What can be done to mitigate this issue?

    Read the article

  • Linux Transparent Bridge for Network

    - by Blackninja543
    I am attempting to set up a semi-transparent bridge. I say semi because I want it to act as a transparent tap for all traffic moving through both sides of the bridge. What I also want is to have the "green zone" accessible to a web interface for the bridge that will display all results of the IDS and other network monitoring tools. My example would be as such: eth0 <--> bridge(br0) <--> eth1 The entire network would be on the same subset however anything coming from eth0 to eth1 would be accepted. The only time anything would be drop is if the eth0 attempted to access br0. If someone attempts to access the web interface on br0 through eth1 it will succeed. My biggest problem I feel is if I attempt to block anything from eth0 to br0 this will drop the bridge all together.

    Read the article

  • Why does a wired network slow down with user increase?

    - by Ed Briscoe
    If you had a wired network, 20 PCs hooked up to a 100 Mbit/sec switch (same onboard ethernet port speed) and you were just sending some test data round. What is the technical explanation as to why 20 machines sending test data around this network to each other is slower than one to one? I mean I know a busy network means it's slower but I'm really trying to understand some more technical details. Thanks for any help

    Read the article

  • Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

    - by Srekel
    I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

    Read the article

  • What could prevent one Amazon EC2 instance from pinging another instance's Private IP?

    - by ks78
    I have multiple Amazon EC2 instances which need to communicate using private IPs. However, so far I've been unable to ping one instance's private IP from another instance. I can ping external addresses, such as their Elastic IPs and other sites (yahoo, google, etc), so it seems there's nothing wrong with the instances' network configuration. Also, they are all in the same zone, so that shouldn't be an issue. Does anyone have any idea what I could be doing wrong? Could this related to the Security Group settings?

    Read the article

  • Archlinux/atheros WLAN configuration troubles

    - by GrinReaper
    I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

    Read the article

  • How to set WAN side buffers for WRT54GL running Tomato Firmware

    - by Vickash
    I've recently set up a machine running m0n0wall to try and fight buffer bloat and do some traffic shaping. It was more convenient (geographically speaking) to connect the cable modem directly to my old WRT54GL, then pass everything to the m0n0wall machine and have that do the real routing work. It took a bit of work, but it's working pretty well. I have a cable connection. I have m0n0wall set up to utilize only 90% of the specified speed of my subscription, which is fine. But I've noticed that at certain times of the day (possibly when my true bandwidth drops below that 90%), there's more latency if the connection is used heavily, and traffic shaping doesn't seem to work as well. I suspect this is caused by the buffers on the WRT54GL still being unnecessarily large. If the connection is working as expected, they won't get filled, but in times of reduced bandwidth they would. Does anyone know the command I need to execute, on the WRT54GL running Tomato Firmware, to reduce the buffers on the WAN interface to the minimum size possible?

    Read the article

  • vista wireless adapter not working

    - by Sam Adams
    After this script gets called http://blogs.technet.com/b/heyscriptingguy/archive/2008/09/29/how-can-i-enable-or-disable-my-network-adapter.aspx 50 times over a 12 hour span, disabling wireless/enabling wired, followed by enabling wireless/disabling wired, the wireless adapter stops finding connections entirely, even if it is enabled, needing a reboot. vista, powershell 1.0 (for some reason vista is not accepting powershell 2 for an update), 32 bit, intel R pro /wireless 3945ABG adapter. Any reasons why, thanks.

    Read the article

  • What's the likely culprit in email delay?

    - by Kiki
    If anyone can shed light or point me to a tutorial, I'd appreciate it. We are a tiny company and have experienced occasional delays in receiving email sent between staff members. We are in separate cities but all in the same state; our webhost/email ISP is across the country from us. If it matters, we're on Macs and most of use Entourage. Our email configurations are POP server: companyname.com and SMTP: smtp.companyname.com (When we used our DSL providers for SMTP we had unreliable service) Our ISP says they're not seeing delays related to their equipment and the problem is elsewhere in the network. A co-worker believes that the delays are with the ISP. Is there a good way to figure this out?

    Read the article

  • How to prevent Ubuntu from combining networks on 2 NIC server?

    - by SolarPower
    I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

    Read the article

  • "Address already in use" error from socket bind, when ports are not being used

    - by Ivan Novick
    I can not bind (using C or python sockets) to any port in the range: 59969-60000 Using lsof, netstat and fuser I do not see any processes using these ports. Other ports such as 59900-59968 and 60001-60009 I can bind to them. My OS: is CentOS release 5.5 (Final) 2.6.18-194.3.1.el5 There must be something missing? Anyone have any idea how to debug why this port range is not usable? Cheers, Ivan

    Read the article

  • One email user keeps disconnecting from our exchange server

    - by Funky Si
    I have one user who keeps reporting that Outlook keeps disconnecting from our email server. All other users are fine. Our email server is running Exchange 2010 and the client is running Outlook 2003. The disconnection only lasts a moment. I have checked for logs on the client and Exchange server and can not see any reason for the disconnect, On the Client I get EventId 26 telling me Outlook has disconnected and reconnected but no reason why. Can anyone give me some suggestions of things to try and track down where the problem could be? --Update-- I have found the following log file C:\Program Files\Microsoft\Exchange Server\V14\Logging\RPC Client Access which suggests that it is a problem with RPC sessions. Excerpt is below 2013-01-31T15:21:24.015Z,6413,15,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,0,00:00:00,"BS=Conn:24,HangingConn:0,AD:$null/$null/0%,CAS:$null/$null/2%,AB:$null/$null/0%,RPC:$null/$null/1%,FC:$null/0,Policy:ClientThrottlingPolicy2,Norm[Resources:(Mdb)Mailbox Database 0765959540(Health:-1%,HistLoad:0),(Mdb)Public Folder Database 1945427388(Health:-1%,HistLoad:0),];GC:6/1/0;", 2013-01-31T15:21:24.015Z,6413,16,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,PublicLogoff,0,00:00:00,LogonId: 1, 2013-01-31T15:21:24.015Z,6413,16,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,"BS=Conn:24,HangingConn:0,AD:$null/$null/0%,CAS:$null/$null/2%,AB:$null/$null/0%,RPC:$null/$null/1%,FC:$null/0,Policy:ClientThrottlingPolicy2,Norm[Resources:(Mdb)Mailbox Database 0765959540(Health:-1%,HistLoad:0),(Mdb)Public Folder Database 1945427388(Health:-1%,HistLoad:0),];GC:6/1/0;", 2013-01-31T15:21:24.015Z,6417,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,OwnerLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.015Z,6417,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,0x6BA (rpc::Exception),00:02:54.7668000,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0; SessionDropped,"RpcEndPoint: [ServerUnavailableException] Connection must be re-established - [SessionDeadException] Connection doesn't have any open logons, but has client activity. This may be masking synchronization stalls. Dropping a connection." 2013-01-31T15:21:24.015Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00.0156000,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, 2013-01-31T15:21:24.031Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,Disconnect,0,00:02:54.2364000,, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,OwnerLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,Disconnect,0,00:02:54.4392000,, 2013-01-31T15:21:24.031Z,6416,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6416,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, Can anyone help point me in the right direction for a solution?

    Read the article

  • Displaying ads over WiFi hotspot

    - by Ahsan
    I have recently distributed my WiFi network with highpseed antennas to my area which covers almost 300-400 peoples. I am not charging them anything but i would like to generate some revenue through Advertisements placed on the websites that they visit. Is it possible to display ads from Google (I know i can do redirect the Advertisements, using some cache server or firewall) . Its just like a free vpn but i would like to have my advertisements above the websites they visit so i can take out the cost for the WiFi that i offer. Any suggestions would be great!

    Read the article

  • Open ports broken from internal network

    - by ksvi
    Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP. Note: I know I could just use the internal IP inside of the network to access this service. But if I have a laptop that must be able to do this both from inside and outside it would be annoying to constantly switch between 1.2.3.4 and 192.168.1.100 in the software configuration. Router output: > iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 224.0.0.0/3 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 to:192.168.1.101 DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:25 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:12345 to:192.168.1.102 DNAT udp -- 0.0.0.0/0 192.168.1.1 udp dpt:53 to:217.118.96.203 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 192.168.1.0/24 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >