Search Results

Search found 44090 results on 1764 pages for 'working conditions'.

Page 349/1764 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• radeon display driver clones monitors while using Xinerama

  - by gregmuellegger

  I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

  Read the article

• Issue with image lightbox and enlargement / Jquery Mobile

  - by Matt

  I'm working on a redesign of my weather website using Jquery Mobile. I have it set up so that you drill down through a series of content containers to get to the weather info (each group of info opens in a dialog display). Everything's worked well, but I've run into an issue with my images. I have them sized so that they fit a mobile device's screen nicely, but because of that, when you look at them in a desktop browser, you can't really make out what the image is. I've tried several image lightbox / enlargement solutions, but for some reason, none of them have worked. Either nothing happens or the images open in a new window. I thought that this might be caused by Jquery Mobile somehow overwriting the scripts and css of the lightbox / enlargements I've tried. I'm not completely sure though that this is the case, and if it is, how I can get around it to be able to enlarge the images to their original size, preferably onclick. Here is a working (for the most part - still some kinks to work out) example. If you look under the "Tropical" section at the "Satellite-Derived Products", you'll see what I mean. http://www.suncoaststormwatch.com/Beta/Index.html

  Read the article

• MySQL documentation writer for MEM and Replication wanted!

  - by stefanhinz

  As MySQL is thriving and growing, we're looking for an experienced technical writer located in the UK or Ireland to join the MySQL documentation team. For this job, we need the best and most dedicated people around. You will be part of a geographically distributed documentation team responsible for the technical documentation of all MySQL products. Team members are expected to work independently, requiring discipline and excellent time-management skills as well as the technical facilities and experience to communicate across the Internet. Candidates should be prepared to work intensively with our engineers and support personnel. The overall team is highly distributed across different geographies and time zones. Our source format is DocBook XML. We're not just writing documentation, but also handling publication. This means you should be familiar with DocBook, and willing to learn our publication infrastructure. Your areas of responsibility would initially be MySQL Enterprise Monitor, and MySQL Replication. This means you should be familiar with MySQL in general, and preferably also with the MySQL Enterprise offerings. A MySQL certification will be considered an advantage. Other qualifications you should have: Native English speaker 5 or more years previous experience in writing software documentation Familiarity with distributed working environments and versioning systems such as SVN Comfortable with working on multiple operating systems, particularly Windows, Mac OS X, and Linux Ability to administer own workstations and test environment Excellent written and oral communication skills Ability to provide (online) samples of your work, e.g. books or articles If you're interested, contact me under [email protected]. For reference, the job offer can be viewed here.

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• Minimum percentage of free physical memory that Linux require for optimal performance

  - by csoto

  Recently, we have been getting questions about this percentage of free physical memory that OS require for optimal performance, mainly applicable to physical compute nodes. Under normal conditions you may see that at the nodes without any application running the OS take (for example) between 24 and 25 GB of memory. The Linux system reports the free memory in a different way, and most of those 25gbs (of the example) are available for user processes. IE: Mem: 99191652k total, 23785732k used, 75405920k free, 173320k buffers The MOS Doc Id. 233753.1 - "Analyzing Data Provided by '/proc/meminfo'" - explains it (section 4 - "Final Remarks"): Free Memory and Used Memory Estimating the resource usage, especially the memory consumption of processes is by far more complicated than it looks like at a first glance. The philosophy is an unused resource is a wasted resource.The kernel therefore will use as much RAM as it can to cache information from your local and remote filesystems/disks. This builds up over time as reads and writes are done on the system trying to keep the data stored in RAM as relevant as possible to the processes that have been running on your system. If there is free RAM available, more caching will be performed and thus more memory 'consumed'. However this doesn't really count as resource usage, since this cached memory is available in case some other process needs it. The cache is reclaimed, not at the time of process exit (you might start up another process soon that needs the same data), but upon demand. That said, focusing more specifically on the percentage question, apart from this memory that OS takes, how much should be the minimum free memory that must be available every node so that they operate normally? The answer is: As a rule of thumb 80% memory utilization is a good threshold, anything bigger than that should be investigated and remedied.

  Read the article

• Tail-recursive implementation of take-while

  - by Giorgio

  I am trying to write a tail-recursive implementation of the function take-while in Scheme (but this exercise can be done in another language as well). My first attempt was (define (take-while p xs) (if (or (null? xs) (not (p (car xs)))) '() (cons (car xs) (take-while p (cdr xs))))) which works correctly but is not tail-recursive. My next attempt was (define (take-while-tr p xs) (let loop ((acc '()) (ys xs)) (if (or (null? ys) (not (p (car ys)))) (reverse acc) (loop (cons (car ys) acc) (cdr ys))))) which is tail recursive but needs a call to reverse as a last step in order to return the result list in the proper order. I cannot come up with a solution that is tail-recursive, does not use reverse, only uses lists as data structure (using a functional data structure like a Haskell's sequence which allows to append elements is not an option), has complexity linear in the size of the prefix, or at least does not have quadratic complexity (thanks to delnan for pointing this out). Is there an alternative solution satisfying all the properties above? My intuition tells me that it is impossible to accumulate the prefix of a list in a tail-recursive fashion while maintaining the original order between the elements (i.e. without the need of using reverse to adjust the result) but I am not able to prove this. Note The solution using reverse satisfies conditions 1, 3, 4.

  Read the article

• Developing my momentum on open source projects

  - by sashang

  Hi I've been struggling to develop momentum contributing to open source projects. I have in the past tried with gcc and contributed a fix to libstdc++ but it was a once off and even though I spent months in my spare time on the dev mailing list and reading through things I just never seemed to develop any momentum with the code. Eventually I unsubscribed and got my free time back and uncluttered my mailbox. Like a lot of people I have some little open source defunct projects lying around on the net, but they're not large and I'm the only contributor. At the moment I'm more interested in contributing to a large open source project and want to know how people got started because I find it difficult while working full time to develop any momentum with the code base. Other more regular contributors, who are on the project full-time, are able to make changes at will and as result enter that positive feedback cycle where they understand the code and also know where it's heading. It makes the barrier to entry higher for those that come along later. My questions are to people who actively contribute to large opensource projects, like the Linux kernel, or gcc or clang/llvm or anything else with say a developer head count of more than 10. How did you get started? Was there a large chunk of time in your life that you just could dedicate to working on the project? I know in Linus's case he had a chunk of time (6 months) to get it started. What barriers to entry did you encounter? Can you describe the initial stages of the time spent with the project, from when you had little understanding of the code to when you understood enough to commit regularly. Thanks

  Read the article

• Xlib: extension "GLX" missing on display ":0". Asus k53s

  - by Steve

  I had everything working fine, I use a number of openGL graphics software, example pymol, mgltools, vmd, ballview, rasmol etc. All of these give the error: Xlib: extension "GLX" missing on display ":0". and fail to initialize. I have an i7 asus k53s with nvidia gforce I need these to do my work. I tried the umblebee fix, and just removing all nvidia drivers, or rolling back. I do not know why these were working then stopped, but did notice a new nvidia console in the mu which I assume was from enabling the automatic nvidia feeds, etc? I also played with the xorg, however have no clue what settings are valid. In addition, the display is 50% of the time not recognized now? It just gives a geeic 640x480 and I have to login and out 10 times to get it to return to a normal setting. When I try and set it manual, there is no other setting allowed from the settings menus, and the terminal changes just get re set every time I log out?

  Read the article

• design an extendible and pluggable business logic flow handler in php

  - by Broncha

  I am working on a project where I need to allow a pluggable way to inject business processes in the normal data flow. eg There is an ordering system. The standard flow of the application is A consumer orders an item. Pays for it and card is authorized. Admin captures the payment. Order is marked as complete and item is shipped. But this process may vary (extra steps in between) for different clients. Say a client would need to validate the location of the consumer before he is presented with a credit card form, OR his policies might require some other processes in between. I am thinking of using State Pattern for processing orders, saving the current state of the order in database, and initializing the state of order from the saved state. I would also need some mechanism, where a small plugin would be able to inject business specific states in the state machine. Am I thinking the right way? Are there already implemented patterns for this kind of situation? I am working with Codeigniter and basically this would mean for me, to redirect to proper controller according to the current state of the order. Like, if the state of the order is unconfirmed then redirect the user to details page and then change the state to pending. If some client would need to do some validation, then register an intermediate state between unconfirmed and pending Please suggest.

  Read the article

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• Recommended formats to store bitmaps in memory?

  - by Geotarget

  I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

  Read the article

• Welcome to the Gamification Blog!

  - by erikanollwebb

  If you are here, you have probably been hearing about gamification and game mechanics, and wondering how it all fits into the enterprise space.  Although I've been leading some efforts in the Fusion Apps UX team on gamification for a while, I have left it to a couple of others to blog on it.  For example, check out the links below from Ultan Ó Broin if you haven't seen these already: #gamifyOracle: Oracle Applications Gamification Worldwide #UX Design Jam Oracle Applications UX Gamification Worldwide All Hands Day Gamification, Schamification: Reality Isn't Broken. Your User Experience Is I've been tweeting to #GamifyOracle for a while but I'll try to use this blog to put a little of my own thoughts on the matter together.  In the meantime, I spoke at the GSummit in June on the things we're working on and I'll be leading a workshop and speaking on Enterprise Gamification at the Enterprise Gamification Summit in September.  Oracle peeps, let me know if you are interested in attending, since we can get a group discount for the workshop/summit.  We're also planning to conduct some more research on gamification in the enterprise space at Oracle OpenWorld this October.  In the meantime, let me know if there are issues you are interested in and I'll try to put some things together here.  I'd love to know who all is working on gamification in Oracle--I know some of you but I'm sure there are others!

  Read the article

• More Denali Execution Plan Warning Goodies

  - by Dave Ballantyne

  In my last blog, I showed how the execution plan in denali has been enhanced by 2 new warnings ,conversion affecting cardinality and conversion affecting seek, which are shown when a data type conversion has happened either implicitly or explicitly. That is not all though, there is more .  Also added are two warnings when performance has been affected due to memory issues. Memory spills to tempdb are a costly operation and happen when SqlServer is under memory pressure and needs to free some up. For a long time you have been able to see these as warnings in a profiler trace as a sort or hash warning event,  but now they are included right in the execution plan.  Not only that but also you can see which operator caused the spill , not just which statement.  Pretty damn handy. Another cause of performance problems relating to memory are memory grant waits.  Here is an informative write up on them,  but simply speaking , SQLServer has to allocate a certain amount of memory for each statement. If it is unable to you get a “memory grant wait”.  Once again there are other methods of analyzing these,  but the plan now shows these too. Don't worry that’s not real production code There is one other new warning that is of interest to me, “Unmatched Indexes”.  Once I find out the conditions under which that fires ill blog about it.

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• Skillset improvement in coming new year

  - by exiter2000

  Here is a little background information. I have been working for Java 10 years. The product I am working on went to live about 3 years ago. Now, the product is getting stable. After all the post-product drama, I gained a lot of knowledge about Oracle & SQL. People(mainly management) were desperated enough to give me deep oracle-related task over DBAs. I admit I considered becoming DBA but eventually decided to remain as a programmer. DBAs & Management are demanding all the DB & Query related task back to DBA, which makes me a bit sad. In short, I anticipate a lot of time next year. What would you do to improve your skillset?? I am thinking to upgrade my Java version(Not from experience though, we are using JDK1.5) to 1.6 getting certificate. Any good idea from fellow developers?? -----------Edit --------------------- How about data modeling for application? Do you guys think it is developer role??

  Read the article

• Trouble dual booting Ubuntu 14.04 & Windows 8

  - by AkBKukU

  My motherboard (MSI G45-Z87) has efi, I still can't figure out how to make stuff work with it. I had Ubuntu working with Windows 8 before 14.04 came out and I did a clean install of Ubuntu when it did to upgrade. Since then I hadn't been able to boot Windows but I don't use it anyway so it didn't effect me. I tried getting it working today so I could use some adobe software. The last time I had tried to do something with the boot it was giving me warnings that my boot files were to far in the drive. So I followed this guide to use gparted and boot-repair to add a boot partition. I was able to reboot Ubuntu after that. I then proceeded to install Windows 8.1 to a different drive. Now the computer will only boot straight into Windows and if I manually select Ubuntu, but not the drive Ubuntu is on, to boot it stops on a black screen during boot after showing the Ubuntu logo. I've run boot-repair in several different ways but have had no luck. Here is the boot summary info from the recommended settings for it. I could really use some help.

  Read the article

• Ubuntu 12.10 won't display properly after kernel upgrade

  - by Daniel

  After updating a system today, Ubuntu's doesn't display correctly. The desktop now looks like this. It was working properly before. I had to use the terminal to run synaptic package manager, so I could view the update history; which is as follows: Commit Log for Wed Nov 7 11:50:36 2012 Upgraded the following packages: linux-image-generic (3.5.0.17.19) to 3.5.0.18.21 Installed the following packages: linux-image-3.5.0-18-generic (3.5.0-18.29) linux-image-extra-3.5.0-18-generic (3.5.0-18.29) Prior to this issue, the last active driver was nvidia-current-updates, version 304.51. I tried using the nvidia-current driver, version 304.51.really.304.43 instead, but the problem persists. I tried running nvidia-settings from terminal, so I could try configuring something, but the application informs that the Nvidia driver is not being used. As the x-swat repository has nothing for Quantal, I desperately used the unstable x-edgers repository & upgraded, but to no avail; so I purged it. The display should normally be full HD, but the only available resolutions now are 1024x768(4:3) and 800x600(4:3). The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen. How can I fix this problem? Update: I tried using the Nouveau third-party driver & this fixes the issue. However, if you have any idea how to get the Nvidia drivers working properly with the latest kernel, please share; as I've noticed some videos playing very slowly on the system, though I'm not sure exactly why.

  Read the article

• Games without a(n explicit) game loop

  - by Davy8

  Most game development happens with a main game loop. Are there any good articles/blog posts/discussions about games without a game loop? I imagine they'd mostly be web games, but I'd be interested in hearing otherwise. (As a side note, I think it's really interesting that the concept is almost exclusively used in gaming as far as I'm aware, perhaps that may be another question.) Edit: I realize there's probably a redraw loop somewhere. I guess what I really mean is a loop that is hidden to you. Frames are something you as the developer are not concerned with as you're working on a higher level of abstraction. E.g. someLootItem.moveTo(inventory, someAnimatationType) and that will move from the loot box to your inventory using the specified animation type without the game developer having to worry about the implementation details of that animation. Maybe that's how "real" games end up working, but from reading most tutorials they seem to imply a much more granular level of control is used, but that might just be an artifact of being a tutorial.

  Read the article

• PHP Debugging

  - by Bob Porter

  Originally posted on: http://geekswithblogs.net/blogofbob/archive/2013/06/25/php-debugging.aspxI have been experimenting setting up a PHP development environment. I have been trying on Windows, Linux (Ubuntu) and Mac OS X. So far my favorite environment is on Mac OS X. I have tried a number of IDE's and debuggers as well.  IDE's Eclipse with the PDT Add On The PDT version of Eclipse Aptana Zend Netbeans  Debuggers Zend XDebug So far the only environments that I could get running quickly were Zend and Netbeans. Eclipse is a nightmare of versions and capabilities. I could only get Eclipse working well on Windows. On Ubuntu I was able to get the debugger working once. Thats it, one session, then it never worked again. I love the Zend tools and environment and it worked well everywhere I tried it, but it was beyond my budget.  Aptana also worked best on Windows, on Mac OS X it was fragile and I never could get debugging to work.  Netbeans worked first time, every time, every where. With one oddity, after several debugging sessions the debugger would refuse to connect. On every platform, I would end having to reboot to restore debugging, which would then work correctly for quite some time. I am sure I will discover that some process is hanging and there is a less intrusive way to clear the issue, but for now rebooting always works. In a future post I will go over how exactly I set my environment up, for now I have decided to stay with OS X. By the way, I did NOT use MAMP or the Zend Server, I stuck with PHP compiled and built from source, as well as Apache and MySQL installed locally. I use Homebrew as a package manager for OS X. I tried PORT but did not like the fact I had to sudo all the time to use it, and it installed things in /opt which I was not used to. Homebrew does sandbox the apps but it is nice enough to symlink them to their "normal" locations usually in /usr/local.

  Read the article

• How can I connect my USB (HP) printer in 10.4, which can't be discovered and worked in 9.x

  - by Brian

  My printer was working under 9.x. It is a an hp photosmart C3100 series. When I open the Admin- printing. no local printers are found. I try to add via other (My local choices are Serial and other). I have tried many uri's - ipp://localhost:631/ipp, http://localhost/ipp, localhost, 127.0.0.1, etc... None have worked. Under the networked I have tried JetDirect, using localhost and 127.0.0.1 and port 631. I have tried many options under IPP with different variants in the host trying to verify a printer. No luck. I tried LPD/LPR with localhost and tried the probe. no luck. I tried the cups admin via localhost:631 and that didn't work. On the old version its simply found the local printer, I might have picked the driver, I can't remember but it was the photosmart c3100 series that was working. I just can't get 10.4 to print.

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• Wireless on ThinkPad Edge E420s

  - by user21820

  I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

  Read the article

• Installing Django on Windows

  - by Pranav

  Ever needed to install Django in a Microsoft Windows environment, here is a quick start guide to make that happen: Read through the official Django installation documentation, it might just save you a world of hut down the road. Download Python for your version of Windows. Install Python, my preference here is to put it into the Program Files folder under a folder named Python<Version> Add your chosen Python installation path into your Windows path environment variable. This is an optional step, however it allows you to just type python in the command line and have it fire up the Python interpreter. An easy way of adding it is going into Control Panel, System and into the Environment Variables section. Download Django, you can either download a compressed file or if you’re comfortable with using version control – check it out from the Django Subversion repository. Create a folder named django under your <Python installation directory>\Lib\site-packages\ folder. Using my example above that would have been C:\Program Files\Python25\Lib\site-packages\. If you chose to download the compressed file, open it and extract the contents of the django folder into your newly created folder. If you’d prefer to check it out from Subversion, the normal check out points are http://code.djangoproject.com/svn/django/trunk/ for the latest development copy or a named release which you’ll find under http://code.djangoproject.com/svn/django/tags/releases/. Done, you now have a working Django installation on Windows. At this point, it’d be pertinent to confirm that everything is working properly, which you can do by following the first Django tutorial. The tutorial will make mention of django-admin.py, which is a utility which offers some basic functionality to get you off the ground. The file is located in the bin folder under your Django installation directory. When you need to use it, you can either type in the full path to it or simply add that file path into your environment variables as well. Hope this helps!

  Read the article

• Learn More About the PO Approvals Analyzer

  - by LuciaC

  You may think that the PO Approvals Analyzer for Release 12 is only for diagnosing problems when you have a single Purchase Order or Requisition stuck in process, but it offers valuable information to keep your Procurement environment healthy.  Consider this:     The analyzer will list all Procurement critical patches that have not been applied.     It will provide Procurement invalid objects with error messages and provides solutions.     Validations of setup and database conditions for example max extents and space issues. Also the analyzer can be run on all Purchasing documents starting from a date you enter.  This multiple document check provides validations on:     Data corruption issues.     Workflow errors with generic messages i.e. document manager errors.     Documents with workflows in error that cannot be progressed via the application. And, unlike other diagnostics, the analyzer provides known solutions to the problems indicated! So access the Analyzer today and run it on your instance!  Access it now via Doc ID 1525670.1.

  Read the article

• Offshoring: does it ever work?

  - by DanSingerman

  I know there has been a fair amount of discussion on here about outsourcing/offshoring, and the general opinion seems to be that at best it is difficult, and at worst it fails. I have direct experience of offshoring myself; a previous company where I was a dev manager wanted to send some development offshore, and we ran a pilot scheme to see how well it would work. Of course it was a complete failure, although it is not completely clear to me whether this was down to the offshore devs being less talented, the process, or other factors (no doubt it was really a combination). I can see as a business how offshoring looks attractive (much lower day rate), but as far as I can see, the only way it could possibly work is if you do exceptionally detailed design up front, with incredibly detailed specifications; and by the time you have invested in producing that, you have probably spent as nearly as much as if you had written the actual code locally (which I think is an instance of No Silver Bullet) So, what I want to know is, does anyone here have any experience of offshoring actually working ever? Especially if there are any success stories of it working in a semi-agile way? I know there are developers here from all over the World; has anyone worked on an offshore project they consider successful?

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >