Search Results

Search found 26810 results on 1073 pages for 'linux scripting'.

Page 353/1073 | < Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >

• ls returns nothing only in certain directories

  - by Jakobud

  I have a raid drive mounted here: /data/ And certain directories like this one: /data/somedir/somesubdir/ when I run ls w/ or w/o any flags, terminal doesn't return anything. It does not return an empty directory listing. It simply goes to the next line and sits there blank with no prompt coming up. I cannot CTRL-C out of it. I have to close this terminal instance and start over. At first I thought it was something to do with the ls command, but its pointing to /bin/ls and I can ls other directories just fine. Also, running this find /data/somedir/somesubdir immediately finds all the files just as expected.

  Read the article

• Why do I get "Permission denied (publickey)" when trying to SSH from local Ubuntu to a Amazon EC2 server?

  - by Vorleak Chy

  I have an instance of an application running in the cloud on Amazon EC2 instance, and I need to connect it from my local Ubuntu. It works fine on one of local ubuntu and also laptop. I got message "Permission denied (publickey)" when trying to access SSH to EC2 on another local Ubuntu. It's so strange to me. I'm thinking some sort of problems with security settings on the Amazon EC2 which has limited IPs access to one instance or certificate may need to regenerate. Does anyone know a solution?

  Read the article

• NAT ports - how do they work?

  - by Davidoper

  I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

  Read the article

• Block IP Address including ICMP using UFW

  - by dr jimbob

  I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

  Read the article

• XTerm and a bold text

  - by user610378

  This is my Xterm config: XTerm*saveLines: 512 XTerm*reverseVideo: false XTerm*reverseWrap: true XTerm*fullCursor: true XTerm*scrollTtyOutput: on XTerm*scrollKey: on XTerm*eightBitInput: false XTerm*pointerColor: white XTerm*pointerShape: left_ptr XTerm*charClass: 37:48,45-47:48,58:48,64:48,126:48 XTerm*cursorColor: rgb:aa/aa/aa XTerm*cursorColor2: black XTerm*color0: rgb:71/71/71 XTerm*color1: rgb:cd/00/00 XTerm*color2: rgb:b4/cd/00 XTerm*color3: rgb:cd/cd/00 XTerm*color4: rgb:71/71/71 XTerm*color5: rgb:cd/00/cd XTerm*color6: rgb:00/cd/cd XTerm*color7: rgb:e5/e5/e5 XTerm*color8: rgb:4c/4c/4c XTerm*color9: rgb:ff/00/00 XTerm*color10: rgb:55/ac/55 XTerm*color11: rgb:ff/ff/00 XTerm*color12: rgb:46/82/b4 XTerm*color13: rgb:ff/00/ff XTerm*color14: rgb:00/ff/ff XTerm*color15: rgb:ff/ff/ff XTerm*colorBD: white XTerm*colorUL: SkyBlue XTerm*colorBDMode: on XTerm*colorULMode: on XTerm*underLine: on XTerm*background: rgb:30/0a/24 XTerm*foreground: white XTerm*font: -*-monospace-medium-r-normal-9-140-*-*-m-*-* XTerm*font1: 5x7 XTerm*font2: 6x10 XTerm*font3: fixed XTerm*font4: 9x15 XTerm*ScrollBar.Background: gray XTerm*ScrollBar.thickness: 0 XTerm*ScrollBar.foreground: gray XTerm*ScrollBar: false XTerm*ScrollBar.DrawBorder: false XTerm*loginShell: true XTerm*faceName: Mono XTerm*faceSize: 9 Could anyone say is it possible to make bold some text, wich color is e.g. color1 from my config? I've tried XTerm*color1: rgb:cd/00/00 bold, but this doesn't work.

  Read the article

• "TCP Sweep" - What is it? How am I causing it?

  - by Stephen Melrose

  Hi there, I've just had an email from my hosting company telling me I'm in violation of their Acceptable Use Policy. They forwarded me an email from another company complaining about something to do with a "TCP sweep of port 22". They included a snippet from their logs, 20:29:43 <MY_SERVER_IP> 0.0.0.0 [TCP-SWEEP] (total=325,dp=22,min=212.1.191.0,max=212.1.191.255,Mar21-20:26:34,Mar21-20:26:34) (USI-amsxaid01) Now, my server knowledge is limited at best, and I've absolutely no idea what this is or what could be causing it. Any help would be greatly appreciated! Thank you

  Read the article

• NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use

  - by Francesco

  I have an issue with sendmail on my server (ubuntu 12.10) with php, mysql,and wordpress installed. Basically I want to create a contact form in my blog to receive emails from visitors directly into my gmail account but it doest work! I created a php file called testmail.php to recall it from the browser: <?php $to = '[email protected]'; $subbject = 'TEST MAIL'; $msg = 'test test test test test test test test test test test test test test test'; $isMailed = mail($to, $subbject, $msg, 'From:me <[email protected]>'); if($isMailed) echo 'mail has been send to: ' . $to; else echo 'mail has NOT been send..'; ?> But I dont receive anything! The /var/log/mail.log says: NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use What do i do wrong? Where do I need to check? What info do you need more? I checked also into the spam folder, nothing. Thank you!

  Read the article

• Free space on Dedi' in CentOS

  - by Trance84

  It will sound stupid but i need to figure out how much disk space i have in my dedicated server, it runs CentOS6...the last command i issued was this [root@ks34900 ~]# df -h Filesystem Size Used Avail Use% Mounted on rootfs 9.7G 6.4G 2.9G 69% / /dev/root 9.7G 6.4G 2.9G 69% / none 1000M 288K 1000M 1% /dev /dev/sda2 914G 200M 868G 1% /home But again, stupid as it may sound... i cant figure out how much space i have in "/" folder (root) And is it possible that "/usr" have a different space (partition)?

  Read the article

• Log Analyzer for Apache

  - by madphp

  Hi, Two related questions. Is there any good apache log analyzer other than awstats and webalizer? and is there any error log analyzers? --Mark

  Read the article

• virturalmin webmin dose not respond

  - by Miranda

  I have installed Virtualmin on a CentOS remote server, but it dose not seem to work https://115.146.95.118:10000/ at least the Webmin page dose not work. I have opened those ports http ALLOW 80:80 from 0.0.0.0/0 ALLOW 443:443 from 0.0.0.0/0 ssh ALLOW 22:22 from 0.0.0.0/0 virtualmin ALLOW 20000:20000 from 0.0.0.0/0 ALLOW 10000:10009 from 0.0.0.0/0 And restarting Webmin dose not solve it: /etc/rc.d/init.d/webmin restart Stopping Webmin server in /usr/libexec/webmin Starting Webmin server in /usr/libexec/webmin And I have tried to use Amazon EC2 this time, still couldn't get it to work. http://ec2-67-202-21-21.compute-1.amazonaws.com:10000/ [ec2-user@ip-10-118-239-13 ~]$ netstat -an | grep :10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* [ec2-user@ip-10-118-239-13 ~]$ sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Since I need more than 10 reputation to post image, you can find the screenshots of the security group setting at the Webmin Support Forum. I have tried: sudo iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It did not change anything. [ec2-user@ip-10-118-239-13 ~]$ sudo yum install openssl perl-Net-SSLeay perl-Crypt-SSLeay Loaded plugins: fastestmirror, priorities, security, update-motd Loading mirror speeds from cached hostfile * amzn-main: packages.us-east-1.amazonaws.com * amzn-updates: packages.us-east-1.amazonaws.com amzn-main | 2.1 kB 00:00 amzn-updates | 2.3 kB 00:00 Setting up Install Process Package openssl-1.0.0j-1.43.amzn1.i686 already installed and latest version Package perl-Net-SSLeay-1.35-9.4.amzn1.i686 already installed and latest version Package perl-Crypt-SSLeay-0.57-16.4.amzn1.i686 already installed and latest version Nothing to do [ec2-user@ip-10-118-239-13 ~]$ nano /etc/webmin/miniserv.conf GNU nano 2.0.9 File: /etc/webmin/miniserv.conf port=10000 root=/usr/libexec/webmin mimetypes=/usr/libexec/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=1 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.585 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sessiononly=/virtual-server/remote.cgi preload= mobile_preroot=virtual-server-mobile mobile_prefixes=m. mobile. anonymous=/virtualmin-mailman/unauthenticated=anonymous ssl_cipher_list=ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:!MD5:!SSLv2:+SSLv3:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM

  Read the article

• Increasing file descriptor limit on Debian does not work! Help!

  - by Aco

  I am running Debian 6 and I am trying to increase the file descriptor limit but it does not want to work. This is what I have done: I edited /etc/sysctl.conf by adding fs.file-max = 64000 at the end and applied the changes using sysctl -p. I then edited /etc/security/limits.conf and added the following lines: * soft nofile 64000 and * hard nofile 64000. Now when I execute ulimit -Hn and ulimit -Sn I still see 1024. I rebooted the server and I still get the same result. What have I failed to do?

  Read the article

• RHEL 5.3 Kickstart - How specify location of individual package in Workstation folder?

  - by Ed

  I keep getting "package does not exist" errors during the install. I made a kickstart ISO to create an unattended install of a RHEL 5.3 build machine for C++ software releases. It pulls the kickstart config file from our internal web server. This is handy; it makes it easy to test and modify without having to make a new ISO. And I plan to check it in to version control if I can get it working. Anyway, the rpm packages are located in two folders on the disk; Client and Workstation. The packages install fine for the ones that are physically located under the Client folder. It cannot find those under the Workstation folder such as as doxygen and subversion complaining that packages do not exist. Is there a way to specify the individual package location? # ----------------------------------------------------------------------------- # P A C K A G E S # ----------------------------------------------------------------------------- %packages @gnome-desktop @core @base @base-x @printing @development-tools emacs kexec-tools fipscheck xorg-x11-server-Xnest xorg-x11-server-Xvfb #Packages Located in Workstation Folder *** Install can not find any of these ?? bison doxygen gcc-c++ subversion zlib-devel freetype-devel libxml2-devel Thanks in advance, -Ed

  Read the article

• CentOS 6.2 Bridge Setup for KVM

  - by Gaia

  I'm trying to set up bridged networking with KVM on CentOS 6.2 to no avail. There are plenty of docs and tutorials about it, but they all seem to conflict or don't provide info specific enough to my situation. I just don't get it. I access the host via public IP "xxx.xxx.128.58". All other available IPs (/29) should be bridged and made available to the only KVM guest (running a public facing LAMP stack) that will be setup on this machine. The amazingly unhelpful NOC people assigned the extra IPs to eth1. Is this correct? Should br0 bridge to eth0 or eth1? How do I set this up? Here is the relevant info: eth0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BC inet6 addr: fe80::225:90ff:fe68:febc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:763 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:550811 (537.9 KiB) TX bytes:648 (648.0 b) Memory:fb980000-fba00000 eth1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.58 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 inet6 addr: fe80::225:90ff:fe68:febd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1806 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:133166 (130.0 KiB) TX bytes:106070 (103.5 KiB) Memory:fb900000-fb980000 eth1:0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.59 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.60 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:2 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.61 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:3 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.62 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) virbr0 Link encap:Ethernet HWaddr 52:54:00:62:55:68 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=XXXX.domain.com > brctl show bridge name bridge id STP enabled interfaces br0 8000.00259068febc no eth0 virbr0 8000.525400625568 yes virbr0-nic > ls -fl | grep ifcfg -rw-r--r-- 1 root root 198 Jun 7 10:58 ifcfg-eth0 -rw-r--r--. 1 root root 254 Oct 7 2011 ifcfg-lo -rw-r--r-- 1 root root 77 Jun 6 18:51 ifcfg-eth1-range0 -rw-r--r-- 1 root root 168 Jun 6 18:50 ifcfg-eth1 > cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BRIDGE="br0" HWADDR="00:25:90:68:FE:BC" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" IPADDR="yyy.yyy.216.131" NETMASK="255.255.255.128" > cat ifcfg-eth1 DEVICE="eth1" HWADDR="00:25:90:68:FE:BD" NM_CONTROLLED="yes" ONBOOT="yes" BOOTPROTO="static" IPADDR="xxx.xxx.128.58" NETMASK="255.255.255.248" GATEWAY="xxx.xxx.128.57" > cat ifcfg-eth1-range0 IPADDR_START="xxx.xxx.128.59" IPADDR_END="xxx.xxx.128.62" CLONENUM_START="0" Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.128.56 * 255.255.255.248 U 0 0 0 eth1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 1003 0 0 eth1 default xxx.xxx.128.57 0.0.0.0 UG 0 0 0 eth1

  Read the article

• Limit rate of outgoing UDP packets per second

  - by tim82

  Hi, since Teamspeak version 3 sends lots of packets per user and our provider is getting problems with his infrastructure above 20.000 packets per second we have to limit it that our servers are not going to be shut down. Red a lot about iptables but was not able to find the right rules. Could you give me an advise how to manage that the server is not going to send more than 19k packets per seconds? We are running on debian 4 Thanks in Advance Tim

  Read the article

• Postfix connect timing out remotely, working fine locally

  - by Moritz

  Running Postfix on Debian I cannot connect to send mail any more. It worked until approximately a week ago. I do not recall touching the configuration of the server during that time, which makes it difficult for me to find out what the problem is. When connecting from the server to itself it works fine: root@xxxx:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. ehlo localhost 220 mail.xxxx.de ESMTP Postfix (Debian/GNU) 250-mail.xxxx.de 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. Trying to do the same remotely times out: laptop:~ $ telnet mail.xxxx.de 25 Trying 93.xx.xx.xx... telnet: connect to address 93.xx.xx.xx: Operation timed out telnet: Unable to connect to remote host Configuration is as follows: root@xxxx:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 mailbox_command = mailbox_size_limit = 0 mydestination = localhost.localdomain, localhost.localdomain, localhost myhostname = mail.xxxx.de mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_gid_maps = static:8 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 150 virtual_transport = dovecot Receiving mails is no problem, as is retrieving them remotely. Do you have an idea what I could check next?

  Read the article

• rdiff-backup command to restore

  - by Hulk

  Let say i have a source directory which contains The contents /foo/a /foo/b(These are the files in a directory on a remote system) using rdiff command i make a backup as rdiff-backup [email protected]::/foo backups And a,b are now present in my backups directory.And then i delete file a from the remote system and again i do a sync so my local directory has the file b only. My question is that how do i restore file a if the deletion and sync is done on the same day Thanks..

  Read the article

• Read only bind-mount?

  - by depesz

  I use mount -o bind to mount directories inside chroots, which works really well. The problem is that I'd like some of these bind-mounted directories to be read only in chroot. Is it possible? If not - any other way to achieve it? I was thinking about using NFS for localhost mounts, but it looks like overkill.

  Read the article

• What does the -P option do to mount?

  - by Simon

  I'm migrating from an archaic version of Red Hat to Ubuntu 9. When going through my old nfs mount script, I found that it contained the -P option. So my script looks like: sudo mount -t nfs -o -P ... It looks like the -P is one of the -o options. My question is: what does the -P option do? I've searched every man page I can find, with no luck. Could it have to do with privileged ports?

  Read the article

• wildcard dns setting for another server

  - by basit.

  my domain is on one server and i wanted to put wildcard dns settings for another server. basically i have two servers and i want all the wildcard to go on second server, how can i do that?

  Read the article

• Adding lines to /etc/profile with puppet?

  - by miku

  I use puppet to install a current JDK and tomcat. package { [ "openjdk-6-jdk", "openjdk-6-doc", "openjdk-6-jre", "tomcat6", "tomcat6-admin", "tomcat6-common", "tomcat6-docs", "tomcat6-user" ]: ensure => present, } Now I'd like to add JAVA_HOME="/usr/lib/java" export JAVA_HOME to /etc/profile, just to get this out of the way. I haven't found a straightforward answer in the docs, yet. Is there a recommended way to do this? In general, how do I tell puppet to place this file there or modify that file? I'm using puppet for a single node (in standalone mode) just to try it out and to keep a log of the server setup.

  Read the article

• Why doesn't my symbolic link work?

  - by orokusaki

  I'm trying to better understand symbolic links... and not having very much luck. This is my actual shell output with username/host changed: username@host:~$ mkdir actual username@host:~$ mkdir proper username@host:~$ touch actual/file-1.txt username@host:~$ echo "file 1" > actual/file-1.txt username@host:~$ touch actual/file-2.txt username@host:~$ echo "file 2" > actual/file-2.txt username@host:~$ ln -s actual/file-1.txt actual/file-2.txt proper username@host:~$ # Now, try to use the files through their links username@host:~$ cat proper/file-1.txt cat: proper/file-1.txt: No such file or directory username@host:~$ cat proper/file-2.txt cat: proper/file-2.txt: No such file or directory username@host:~$ # Check that actual files do in fact exist username@host:~$ cat actual/file-1.txt file 1 username@host:~$ cat actual/file-2.txt file 2 username@host:~$ # Remove the links and go home :( username@host:~$ rm proper/file-1.txt username@host:~$ rm proper/file-2.txt I thought that a symbolic link was supposed to operate transparently, in the sense that you could operate on the file that it points to as if you were accessing the file directly (except of course in the case of rm where of course the link is simply removed).

  Read the article

• rsyslog - regex trouble

  - by benmccann

  I'm trying to setup the logentries service. If a log entry has a token in it then I would like to send it to api.logentries.com:10000. The token is a guid in the format aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee. Right now I'm doing: # If there's a logentries token then send it directly to logentries :msg, regex, ".*[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}.*" & @@api.logentries.com:10000 I checked the rsyslog debug logs and my regex is not matching, but I can't figure out why or how to fix it: 5245.961161378:7fb79b514700: Filter: check for property 'msg' (value ' fb1c507f-2ede-4d7f-a140-2bd8d56e133 - application - [play-akka.actor.default-dispatcher-1] - Found user: 4fb11ea5e4b00a1aeebe2800') regex '.*[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}.*': FALSE

  Read the article

• can't figure out why apache LDAP auth fails

  - by SethG

  Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

  Read the article

• Proper procedure - sftp access to www folder - To be able to upload files

  - by Jay

  My www folder is root:root. What should it be? My site works perfectly but maybe I am doing something wrong. My nginx.conf says user is 'nginx'. Should I be changing the www onwership and group to that or something else? Mainly I want to be able to sftp into the www folder using FileZilla. Preferably only allow access to the www folder. I want to be able to upload the website files but I just don't know the proper procedure. I have tried changing owners and groups but I get worried some part of the stack will not like it. For example does nginx play along, and php? I thought about having a sftp group or even an sftp user. But I don't want to go down a path that should be avoided. What should I be doing with my setup?

  Read the article

• Pecl install ssh2, make failed

  - by user28259

  Hi! I'm trying really hard since two hours to install ssh2 with pecl... But all I get is: /bin/sh /root/ssh2-0.11.0/libtool --mode=compile cc -I. -I/root/ssh2-0.11.0 -DPHP_ATOM_INC -I/root/ssh2-0.11.0/include -I/root/ssh2-0.11.0/main -I/root/ssh2-0.11.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/ssh2-0.11.0/ssh2.c -o ssh2.lo mkdir .libs cc -I. -I/root/ssh2-0.11.0 -DPHP_ATOM_INC -I/root/ssh2-0.11.0/include -I/root/ssh2-0.11.0/main -I/root/ssh2-0.11.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/ssh2-0.11.0/ssh2.c -fPIC -DPIC -o .libs/ssh2.o /root/ssh2-0.11.0/ssh2.c:52: error: duplicate 'static' /root/ssh2-0.11.0/ssh2.c: In function 'zif_ssh2_methods_negotiated': /root/ssh2-0.11.0/ssh2.c:503: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:504: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:508: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:509: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:510: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:511: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:516: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:517: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:518: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:519: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c: In function 'zif_ssh2_publickey_add': /root/ssh2-0.11.0/ssh2.c:1045: warning: passing argument 1 of '_efree' discards qualifiers from pointer target type /usr/include/php/Zend/zend_alloc.h:46: note: expected 'void *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c: In function 'zif_ssh2_publickey_list': /root/ssh2-0.11.0/ssh2.c:1104: warning: passing argument 4 of 'add_assoc_stringl_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:361: note: expected 'char *' but argument is of type 'const unsigned char *' /root/ssh2-0.11.0/ssh2.c:1105: warning: passing argument 4 of 'add_assoc_stringl_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:361: note: expected 'char *' but argument is of type 'const unsigned char *' make: *** [ssh2.lo] Error 1 I looked on google a lot, I found some patches which didn't worked at all. So if you think you could help me, go ahead! Thanks!

  Read the article

< Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >