Search Results

Search found 26810 results on 1073 pages for 'linux scripting'.

Page 354/1073 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

• Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

  - by Beres Botond

  I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• How do I determine the cause of a sustained spike in mysql queries/activity?

  - by mattmcmanus

  So this is more of a "I'm trying to learn about how this works" question rather than "there is a serious problem I can't figure out!" question. I'm setting up a VPS and have been tweaking and changing things here and there. I recently installed munin (like two days ago) and yesterday I noticed a significant increase in mysql activity. So now my curiosity is going crazy. How do I setup/access mysql's query log? I have about 5 databases on the server so I want to see which one is getting all the action. Is there anything else I can do to keep a better eye on what's going on? Here are the graphs. As you can tell, it's not that much activity at all but I'm just curious at the change. The sites that are on the server right now do not get a lot of traffic. It's running a couple drupal sites, only one of which is live. The live one hasn't had a spike in traffic and the last spike was 250 visitors so it's barely a spike at all.

  Read the article

• Setting up Windows SBS 2008 network on Xen

  - by samyboy

  I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

  Read the article

• Installing VPN connection and wifi drivers on RHEL5

  - by Hulk

  In RHEL5, 1.How to establish a VPN connection,The details i get to connect the VPN are ipaddreess ,username/password 2.How to install wifi drivers on RHEL5 Thanks..

  Read the article

• How to execute with /bin/false shell

  - by Amar

  I am trying to setup per-user fastcgi scripts that will run each on a different port and with a different user. Here is example of my script: #!/bin/bash BIND=127.0.0.1:9001 USER=user PHP_FCGI_CHILDREN=2 PHP_FCGI_MAX_REQUESTS=10000 etc... However, if I add user with /bin/false (which I want, since this is about to be something like shared hosting and I don't want users to have shell access), the script is run under 1001, 1002 'user' which, as my Google searches showed, might be a security hole. My question is: Is it possible to allow user(s) to execute shell scripts but disable them so they cannot log in via SSH?

  Read the article

• Wake On Lan for Fedora 12

  - by Toymakerii

  I have a fedora 12 box that I am using as a sandbox for web development and a few other toys. The box gets really hot so I would like it to sleep/hibernate when no one is using it, however most of the people connecting to the box will not be able to access it physically. Is it possible to set up a Wake On Lan that wakes up the machine when it detects an SSH connection? A google search didn't yield much information. (or atleast I wasn't smart enough to register it as useful!)

  Read the article

• Running scripts from another directory

  - by Desmond Hume

  Quite often, the script I want to execute is not located in my current working directory and I don't really want to leave it. Is it a good practice to run scripts (BASH, Perl etc.) from another directory? Will they usually find all the stuff they need to run properly? If so, what is the best way to run a "distant" script? Is it . /path/to/script or sh /path/to/script and how to use sudo in such cases? This, for example, doesn't work: sudo . /path/to/script

  Read the article

• Can I use a package manager of one distribution on another?

  - by Yktula

  I want to use Gentoo's packages on Fedora. Is this possible?

  Read the article

• Why is (free_space + used_space) != total_size in df? [migrated]

  - by Timothy Jones

  I have a ~2TB ext4 USB external disk which is about half full: $ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdc 1922860848 927384456 897800668 51% /media/big I'm wondering why the total size (1922860848) isn't the same as Used+Available (1825185124)? From this answer I see that 5% of the disk might be reserved for root, but that would still only take the total used to 1921328166, which is still off. Is it related to some other filesystem overhead? In case it's relevant, lsof -n | grep deleted shows no deleted files on this disk, and there are no other filesystems mounted inside this one.

  Read the article

• getting input/output error from NFS client on RHEL5

  - by Andrew Watson

  i have two RHEL5 boxes on a private network together (192.168.2.0/24) and I am trying to export a file system from one to the other but I keep getting the following error: mount.nfs: Input/output error on the client side I see this output: mount: trying 192.168.2.101 prog 100003 vers 3 prot tcp port 2049 mount: trying 192.168.2.101 prog 100005 vers 3 prot tcp port 960 and on the server side I see this: Sep 20 14:14:32 omicron mountd[18739]: authenticated mount request from 192.168.2.87:635 for /srv/nfs/web (/srv/nfs/web) but that's all. I opened up iptables so that the whole 192.168.2.0/24 network is allowed to communicate freely but the public side is locked down to 22,80 etc.... any ideas?

  Read the article

• socat and rich terminals (with Ctrl+C/Ctrl+Z/Ctrl+D propogation)

  - by Vi

  socat - exec:'bash -li',pty,stderr,ctty - bash: no job control in this shell What options should I use to get fully fledged shell as I get with ssh/sshd? I want be able to connect the shell to everything socat can handle (socks5, udp, openssl), but also to have a nice shell which correctly interprets all keys, various Ctrl+C/Ctrl+Z and jobs control. Update: Found "setsid" socat option. It fixes "no job control". Now trying to fix Ctrl+D.

  Read the article

• Config files for xterm

  - by petersohn

  Is there any config files for xterm for default settings? For example, on my system, xterm start with black text on white background, and I want it the other way around. I can do it by starting it with: xterm -bg black -fg white. I want to set in a config file that if I run it without arguments, it will start with these options.

  Read the article

• Unable to install bin files.(No such file or directory error)

  - by rogerstone

  I wanted to install adobe reader on my ubuntu 10.10(Maverick Meerkat).I have downloaded the file and copied it on my desktop.I had then browsed to the desktop directory through command line terminal. I had tried all the possible combinations of the commands but still i get a "file or directory does not exist error" roger@ubuntu:~/Desktop$ chmod a+x AdbeRdr9.4-1_i486linux_enu.bin roger@ubuntu:~/Desktop$ sudo ./AdbeRdr9.4-1_i486linux_enu.bin sudo: unable to execute ./AdbeRdr9.4-1_i486linux_enu.bin: No such file or directory I tried without the sudo and this is what i get roger@ubuntu:~/Desktop$ chmod a+x AdbeRdr9.4-1_i486linux_enu.bin roger@ubuntu:~/Desktop$ ./AdbeRdr9.4-1_i486linux_enu.bin bash: ./AdbeRdr9.4-1_i486linux_enu.bin: No such file or directory The file is present in the desktop.Where am i going wrong? P.S:This is not a duplicate of the question Cannot install .bin package on Ubuntu

  Read the article

• Changing VolumeID inside wine

  - by Oleksandr Bolotov

  How can I change disk volume id in wine? There is vol command in windows which shows volume id and VolumeID (from Sysinternals) which can change VolumeID in windows but not in wine.

  Read the article

• Xen networking is inconsistent in multiple ways

  - by WildVelociraptor

  I've been running xen for a few weeks now on an Ubuntu 12.04 server. I've got 3 guests: a Windows Server 2003 guest, an Ubuntu guest, and a Windows 7 Guest. My Server 2003 guest seems to work fine; I can ping it from the network, the hostname resolves correctly, and it can see the internet. This guest is attached to xenbr0, and its IP is 10.100.1.21. My Win7 guest is what is driving me crazy. I use the same configuration script as a base, changing the important parts (hostname and boot disk, mainly). It installed correctly, and is currently running, but I am unable to ping this guest. It's hostname is "alexander", with an IP of 10.100.1.22. It is also using xenbr0. The guest can ping the firewall and various IP addressess, but seems unable to resolve hostnames. Now heres the weird part: when I use rdesktop (RDP client) from my laptop (not the xen host) to connect to alexander, it works just fine. It apparently resolves the hostname fine, and does the same with the IP address. So, can someone tell me why I can access this guest using RDP, but not using ping, nslookup, traceroute, etc? It's apparently invisible to all but RDP. Also, is it okay to use two guests on the same bridge, or do i need different ones for each guest? Thanks in advance for any help. Regards

  Read the article

• Troubleshooting High Load on Plesk LAMP Dedicated Server

  - by Callmeed

  I have 2 nearly identical dedicated servers with the same provider. They also run a nearly identical software stack: RedHat 5 64-bit, Plesk, PHP, Apache, & MySQL. We use them for hosting custom sites we build. The problem is, while our 1st server has a load average (in top) of around 0.3, the 2nd server consistently has a load average of around 4.0 or higher. Basic functions in Plesk are delayed and there is a bit of latency when executing shell commands. Anyone have ideas why it would be so high? And why it would differ from our other server so much? Here is my current top output (sorted by %MEM) ... Any help is much appreciated ... top - 21:48:04 up 100 days, 4:28, 1 user, load average: 3.74, 4.20, 4.23 Tasks: 336 total, 1 running, 335 sleeping, 0 stopped, 0 zombie Cpu(s): 0.8%us, 0.4%sy, 0.0%ni, 91.3%id, 7.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 12290884k total, 11886452k used, 404432k free, 2920212k buffers Swap: 2096472k total, 244k used, 2096228k free, 6560692k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22536 apache 15 0 860m 547m 6484 S 0.0 4.6 0:10.96 httpd 26467 apache 15 0 859m 546m 6408 S 0.0 4.5 0:07.67 httpd 3620 apache 15 0 859m 545m 5552 S 0.0 4.5 0:06.15 httpd 1895 apache 15 0 858m 544m 6356 S 0.0 4.5 0:08.25 httpd 16933 apache 15 0 858m 544m 5488 S 0.0 4.5 0:01.57 httpd 6431 apache 15 0 856m 542m 6076 S 10.6 4.5 0:05.32 httpd 14417 apache 15 0 856m 542m 5568 S 0.0 4.5 0:03.88 httpd 15403 apache 15 0 855m 541m 5616 S 0.0 4.5 0:03.73 httpd 19165 apache 15 0 853m 539m 6252 S 0.0 4.5 0:12.40 httpd 15898 apache 15 0 852m 539m 5376 S 0.0 4.5 0:02.68 httpd 14401 apache 15 0 851m 538m 5460 S 0.0 4.5 0:02.97 httpd 15393 apache 15 0 851m 538m 5404 S 0.0 4.5 0:03.12 httpd 15427 apache 15 0 851m 538m 5496 S 0.0 4.5 0:02.44 httpd 14412 apache 15 0 851m 538m 5324 S 0.0 4.5 0:02.15 httpd 18330 apache 15 0 851m 537m 5136 S 0.0 4.5 0:01.30 httpd 18303 apache 15 0 848m 535m 5140 S 0.0 4.5 0:00.47 httpd 21190 apache 15 0 845m 533m 3988 S 0.0 4.4 0:00.33 httpd 15923 root 18 0 822m 521m 9928 S 0.0 4.3 10:04.81 httpd 22021 apache 15 0 828m 520m 4964 S 0.0 4.3 0:00.16 httpd 22146 apache 15 0 823m 515m 3016 S 0.0 4.3 0:00.02 httpd 22345 apache 15 0 822m 514m 2408 S 0.0 4.3 0:00.00 httpd 14721 apache 15 0 733m 510m 488 S 0.0 4.3 0:00.00 httpd 5094 root 15 0 1452m 122m 15m S 1.0 1.0 852:24.24 java 4636 mysql 15 0 532m 57m 6440 S 1.0 0.5 488:05.84 mysqld 4799 popuser 15 0 166m 53m 2368 S 0.0 0.4 0:36.64 spamd 16761 popuser 15 0 159m 46m 2312 S 0.0 0.4 0:00.38 spamd 4797 root 15 0 158m 45m 2448 S 0.0 0.4 0:01.27 spamd 5074 root 34 19 255m 20m 2144 S 0.0 0.2 1:37.53 yum-updatesd 9917 named 15 0 366m 9804 1980 S 0.0 0.1 0:10.26 named 4332 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.06 sw-engine-cgi 4341 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.07 sw-engine-cgi 4350 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.09 sw-engine-cgi 4352 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.11 sw-engine-cgi 4376 ntp 15 0 23388 5020 3896 S 0.0 0.0 0:00.58 ntpd 4331 sw-cp-se 15 0 61336 4572 1480 S 0.0 0.0 5:53.22 sw-cp-serverd 4213 haldaemo 15 0 31252 4460 1684 S 0.0 0.0 0:01.52 hald 4778 postgres 18 0 117m 4164 3484 S 0.0 0.0 0:00.11 postmaster 18555 root 16 0 98.3m 3716 2852 S 0.0 0.0 0:00.01 sshd 4488 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4489 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4492 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4493 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4490 sso 18 0 119m 3040 220 S 0.0 0.0 0:00.00 sw-engine-cgi

  Read the article

• Samba - permission issue

  - by user88432

  I am trying to get samba to work properly... I have a "Movies" share (//server/Movies), I want only root account to be able to upload and delete. Guest can view "Movies" share without password/login but they cant delete/update (only view). [Movies] path = /mnt/user/Movies browsable = yes public = yes writable = no write list = root guest ok = yes I can access to Movies share as guest but when I try to add new file I get an error saying: "You need permission to perform this action" I expected username/password to popup but it didn't, how to fix this?

  Read the article

• What's the best way of handling permissions for apache2's user www-data in /var/www ?

  - by gyaresu

  Has anyone got a nice solution for handling files in /var/www/ ? We're running Name Based Virtual Hosts and the apache2 user is 'www-data' We've got two regular users & root. So when messing with files in /var/www ,rather than having to... chown -R www-data:www-data ...all the time, what's a good way of handling this? Supplementary question. How hardcore do you then go on permissions? This one has always been a problem in collaborative development environments. Cheers.

  Read the article

• Changed login for a user with encrypted home, now I can't login

  - by HappyDeveloper

  I changed a user's login by doing this: $ usermod old_login -l new_login I also wanted to move his home to reflect his new username, but it wouldn't let me, so I just rebooted. But now after I login, the screen blinks and I'm redirected back to the login screen. And that's what happens when you cannot access your home, that's why I think it has something to do with his home being encrypted. How do I fix this? I'm on a Ubuntu 12 Virtualbox VM.

  Read the article

• openwrt uses a single interface bridge?

  - by timbo

  My understanding of bridging is that it ties together two interfaces at layer 2. I am looking at a Ubiquiti Nanostation2 running OpenWRT that has an ethernet port 'eth0' and a wifi port 'ath0'. The ethernet port (the 'wan' port) is not part of the bridge and the bridge is just a single interface. Can anyone clarify this? - seems very different to Ubuntu. /etc/config/network: config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' config 'interface' 'wifi' option 'ipaddr' '192.168.13.1' option 'type' 'bridge' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ifname' 'wifi0'

  Read the article

• NSD Daemon (DNS SERVER)

  - by Catalin

  While searching for a secure dns server I came across this http://www.nlnetlabs.nl/projects/nsd/ I was really impressed by what seemed to me the best option out there that's open source. One problem thought their 'tutorial' is really NOT noob friendly I have basic DNS knoledge but what's in there is out of my league. Any help in setting up this DNS server please ? I need to have multiple sites on this CentOs server I've recently got my hands on :). They also need to receive email. Details: I have a master host and would love to set this in the way described in the rows that follow: masterhost.com -> ns1.masterhost.com mail.masterhost.com www.masterhost.com addonhost.com -> ns1.masterhost.com mail.masterhost.com www.addonhost.com And so on, all answers and suggestions are welcomed, Thank you in advance.

  Read the article

• Strategies for very fast delivery of webpages.

  - by Cherian

  I run a website Cucumbertown with an initial pay load of nearly 9KB zipped. All my js is delayed loaded with requirejs and modernizer is the only exception. Now all my webpages are Nginx cached and only 10-15% hits go to the backend proxy. And the cache is invalidated by logged in users as proxy_cache_bypass. So for an anonymous user its nearly always a cache hit. I have some basic OS tuning with default via ip dev eth0 initcwnd 15 net.ipv4.tcp_slow_start_after_idle 0 Despite an all cache & large initcwnd my pages still take 2.5 – 3 seconds. I have a yslow score of And page speed at Are there strategies that can help deliver webpages even faster than this? Deliver pages at 1+ second time for 10KB payload? Notes: My servers run of a fairly good data center from Linode at Fremont.

  Read the article

• “Disk /dev/xvda1 doesn't contain a valid partition table”

  - by Simpanoz

  Iam newbie to EC2 and Ubuntu 11 (EC2 Free tier Ubuntu). I have made following commands. sudo mkfs -t ext4 /dev/xvdf6 sudo mkdir /db sudo vim /etc/fstab /dev/xvdf6 /db ext4 noatime,noexec,nodiratime 0 0 sudo mount /dev/xvdf6 /db fdisk -l I got following output. Can some one guide me what I am doing wrong and how it can be rectified. Disk /dev/xvda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table Disk /dev/xvdf6: 6442 MB, 6442450944 bytes 255 heads, 63 sectors/track, 783 cylinders, total 12582912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvdf6 doesn't contain a valid partition table.

  Read the article

• SVN Authz - Any Subfolder permission or List contents

  - by Jaspa Jones

  Goal Basically I would like SVN users to be able to browse through a directory containing a lot of subfolders without allowing them to read its subfolders. [/] * = r [/Projects] * = # Allow viewing contents, but not reading. At least to be able to see Project1. [/Projects/Project1] my_group = rw Problem The problem is that there are a lot of projects. I could add every other project and make them disappear for the user, but that would be a lot of work to maintain. It would look like this: [/] * = r [/Projects] * = r [/Projects/Project1] my_group = rw [/Projects/Project2] * = [/Projects/Project3] * = [/Projects/Project4] * = [/Projects/Project5] * = It would be nice if I could use this: [/Projects/*] * = Any ideas? Thanks in advance, Jaspa Jones

  Read the article

• running automated fsck on remote server

  - by GriffinHeart

  I had another question about df, and now i came to conclusion i need to run fsck my partition, i've been reading about it and would like some advice, if possible. The situation is like this, no physical access to the server and i want to run fsck. from what i read i just need to touch /forcefsck and when i reboot it will run fsck. My question is, at its basis, with what arguments will the fsck run? Will it need user input to correct errors, etc? and after running will it save a log of what happened? if this was how it ran it would be perfect, anyway of enforcing that on reboot? fsck -v -p /machine/disk/p1 2>&1 > fscklog.txt Also here they describe this: it's also a good idea on debian and debian-derivatives like ubuntu to edit /etc/default/rcS on remote servers and set "FSCKFIX=yes" that adds "-y" to the boot time fsck, so it doesn't risk the remote server being stuck waiting for someone to login at the console and run fsck. But on Centos that doesn't seem to exist I only have ssh access at the moment so that is why i'm being so picky with it. here's some info about disks and mounted volumes on the server: http://pastebin.centos.org/33314 Thanks.

  Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >