Search Results

Search found 26810 results on 1073 pages for 'linux scripting'.

Page 350/1073 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

  • How do I apply multiple subnets to a server with one NIC?

    - by Cosban
    I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

    Read the article

  • Find all duplicate files by md5 hash

    - by Jamie Curran
    I'm trying to find all duplicate files based upon md5 hash and ordered by file size. So far I have this: find . -type f -print0 | xargs -0 -I "{}" sh -c 'md5sum "{}" | cut -f1 -d " " | tr "\n" " "; du -h "{}"' | sort -h -k2 -r | uniq -w32 --all-repeated=separate The output of this is: 1832348bb0c3b0b8a637a3eaf13d9f22 4.0K ./picture.sh 1832348bb0c3b0b8a637a3eaf13d9f22 4.0K ./picture2.sh 1832348bb0c3b0b8a637a3eaf13d9f22 4.0K ./picture2.s d41d8cd98f00b204e9800998ecf8427e 0 ./test(1).log Is this the most efficient way?

    Read the article

  • Rate limit a wireless interface

    - by Jamie Hankins
    I have access to my routers SSH and IPTables. I want to rate limit my guest network to 1Mb/s so they can't guzzle my bandwidth. rai1 RTWIFI SoftAP ESSID:"GuestNetwork" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi0 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F8 Bit Rate=300 Mb/s wdsi1 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi2 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s wdsi3 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s I'm just wondering the command I need to limit it. I tried the iwconfig limit command but it failed. Thanks

    Read the article

  • KVM CLI install for CentOS 6.3 defaults to Minimal Install

    - by i.h4d35
    So I now I've installed KVM (and its associated tools and packages- libvirt, VMM etc.). On the GUI (i.e using the VMM), installation works as its supposed to. However, when I try to create a VM using the command line interface, the OS (I am working with CentOS 6.3) defaults to a Minimal Install instead of giving me options to choose from at the time of installation. I am trying to install using the following command: virt-install \ --connect qemu:///system \ --virt-type kvm --name testVM2 \ --ram 512 --disk path=/var/lib/libvirt/images/testVM2.img,size=8 --vnc \ --cdrom /media/db18de8e-0853-49fb-80de-5c794d58a46f/CentOS-6.3- x86_64-bin-DVD1.iso \ --network network=default Specifying the OS-type or the OS-variant parameters doesn't make a difference. Is there something that I am missing out on or some other parameter that I must specify? Thanks in advance.

    Read the article

  • 2 nics. 2 Defaults Gateways

    - by andre.dias
    Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits using eth0, traffic coming from eth1 exits using eth1. And there is a default gateway configured. $route: default IP 0.0.0.0 UG 0 0 0 eth0 With this configuration, the traffic generated in the server is going out using eth0 (lynx www.google.com for example). The problem is: the Internet link from eth0 went down today. The traffic coming from eth1 was ok...no problem. But the traffic generated in the server was a problem...the default gateway was out...no access do the Internet anymore (no more lynx www.google.com) So i added a new default gateway configuration, pointing to eth1. For 30 minutes i kept that way...2 default gateways, but just one was "working"...and everything was working just fine. But then i removed de eth0 gateway entry because, well, 2 default gateways is kind of weird. My question: is there any problem on keeping these 2 default gateways, one for each? So i don´t need to do nothing when one link go down again? $route: default IP1 0.0.0.0 UG 0 0 0 eth0 default IP2 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Limiting Sybase ASE 15 CPU usage on VM

    - by reiniero
    I've set up a single CPU Sybase ASE 15.7 test/hobby/experimentation system on a Debian Squeeze x64 KVM VM. I notice the CPU load goes to 100% and stays there. Definitely not a Sybase guru, only interested to see if some programs I'm running work on the database. Looking at Sybase docs it seems ASE detects the machine is idle and then takes over all processing just waiting for a connection (and if needed, doing some housekeeping apparently). Normally that would be fine but as it is running in a VM it's taking away processor resources other VMs could use - and the increased fan noise of the PC near my desk annoy me. I've tried to remedy this: set the "runnable process search count" parameter from DEFAULT (2000 IRC) to 3 in /opt/sybase/ASE-15_0/SYBASE.cfg from http://sybase.reygrobellet.com/tutorials/install_sybase_vb/standalone04_configure_oralin11#TOC-Configure-kernel I added this to my /etc/init.d/sybase startup script: echo 0 /proc/sys/kernel/randomize_va_space (though I don't think it'll make much difference) How can I tell Sybase to "behave" and not hog the processor - I don't mind reduced performance.

    Read the article

  • using python Paramiko for ssh: sudo: no tty present and no askpass program specified

    - by misteryes
    I want to use paramiko to ssh into a bunch a remote nodes and run some command line with root priviledge I have ssh key in my home directory and so i don't need to input password when I ssh into those remote nodes but when running the following script: def connect(hostname): ssh = paramiko.SSHClient() ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy()) ssh.connect(hostname, username='niky', pkey=paramiko.RSAKey.from_private_key(open('id_rsa'), 'passwd'), timeout = 240.0) return ssh def run(hostname): ssh = connect(hostname) (stdin, stdout, stderr) = ssh.exec_command("sudo ls") res = stderr.readlines() print hostname+': '+''.join(str(elem) for elem in res)+'\n' run(remote.nity.com) I got the following error: remote.nity.com: sudo: no tty present and no askpass program specified if I don't add sudo before ls everything works fine what are potential reasons ? thanks!

    Read the article

  • iftop Shows Lots of Mysterious Connections - Not Showing in netstat

    - by HOLOGRAPHICpizza
    I've just stopped all pretty much all services except sshd on my server (Ubuntu Server 10.04), and when I run iftop I get output that looks like this: 12.5Kb 25.0Kb 37.5Kb 50.0Kb 62.5Kb mqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqq flash.gateway.2wire.net:ssh <=> 172.16.1.151:60405 1.75Kb 1.54Kb 2.22Kb flash.gateway.2wire.net:21095 <=> 69.127.29.20:32582 536b 107b 27b flash.gateway.2wire.net:21095 <=> 190.164.122.134:13557 0b 105b 26b flash.gateway.2wire.net:21095 <=> 79.165.212.195:45138 0b 105b 26b flash.gateway.2wire.net:21095 <=> 151.42.15.151:9031 0b 72b 18b flash.gateway.2wire.net:21095 <=> 88.185.120.179:51413 0b 0b 49b flash.gateway.2wire.net:21095 <=> 178.120.152.97:25924 0b 0b 29b flash.gateway.2wire.net:21095 <=> 109.110.217.77:27868 0b 0b 26b flash.gateway.2wire.net:21095 <=> 84.13.201.90:16509 0b 0b 26b flash.gateway.2wire.net:21095 <=> 171.7.125.224:11777 0b 0b 26b flash.gateway.2wire.net:21095 <=> 115.177.164.170:21360 0b 0b 26b flash.gateway.2wire.net:21095 <=> 50.88.126.18:25540 0b 0b 25b flash.gateway.2wire.net:21095 <=> 223.206.230.163:13431 0b 0b 25b flash.gateway.2wire.net:21095 <=> 78.144.187.26:24515 0b 0b 25b flash.gateway.2wire.net:21095 <=> 83.20.61.211:27572 0b 0b 25b flash.gateway.2wire.net:21095 <=> 82.134.151.42:18448 0b 0b 18b flash.gateway.2wire.net:21095 <=> 126.117.95.247:25316 0b 0b 18b flash.gateway.2wire.net:21095 <=> 116.202.65.230:9044 0b 0b 18b flash.gateway.2wire.net:21095 <=> 88.120.63.205:51413 0b 0b 17b qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cumm: 61.6KB peak: 8.00Kb rates: 1.59Kb 1.38Kb 2.04Kb RX: 18.4KB 1.64Kb 696b 549b 640b TOTAL: 80.0KB 9.64Kb 2.27Kb 1.92Kb 2.66Kb This is the first part (not the unix socket part) of the output of netstat -a: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:55677 *:* LISTEN tcp 0 0 flash.gateway.2wire:ssh 172.16.1.151:60405 ESTABLISHED tcp 0 48 flash.gateway.2wire:ssh 172.16.1.151:60661 ESTABLISHED tcp6 0 0 [::]:ssh [::]:* LISTEN udp 0 0 *:37790 *:* What could all those strange connections on port 21095 be? And why would they not show up in netstat?? Any advice would be greatly appreciated.

    Read the article

  • What's an easy way to install a bunch of OSS apps in my home dir on my company's aging Redhat VNC servers?

    - by subopt
    My company's IT group doesn't want to install lots of common stuff on our VNC servers, which run RHEL 4. The list of stuff i want/need includes graphviz, midnight commander, various python libs, sqlite, netbeans, antlr, jdk1.6, etc. They've hobbled rpm somehow, so i can't do rpm --relocate. And i don't want the RHEL4 compatible revs of this stuff anyway. I've probably got the room to build all this stuff in my home dir, but i don't want to take forever tracking down dependencies. Looking for an easy way to get the apps/tools i need, and nothing (or very little) else. Any suggestions?

    Read the article

  • Where to set catch-all address in Postfix (virtual mailboxes in affect)

    - by Cem
    I successfully configured Postfix to deliver messages to virtual mailboxes. I can set aliases and pipes inside /etc/postfix/virtual and mailboxes inside /etc/postfix/virtual_mailbox files. However, whenever I set a catch-all domain and point to a remote email address, it overrides all other virtual mailboxes and virtual aliases set in postfix. How can I set a catch-all forwarding to the remote email address when virtual mailbox is enabled? I set catch-all like this: @mydomain.com [email protected] Thanks for your help!

    Read the article

  • Keeping new Ubuntu installation's /var on separate drive without formatting

    - by tlayton
    I have a server running an older version of Ubuntu and with /var stored on a separate partition on a separate hard drive. I am attempting to update Ubuntu to 10.04, but I still want to store /var on a separate partition and hard drive. However, I don't want to format the drive which currently contains /var, as it has important data. Is there some way to have 10.04 set up the new /var on this separate drive at installation, without formatting the drive and losing the old /var?

    Read the article

  • Bad I/O scheduler?

    - by user62367
    os: up-to-date Fedora 14. Working as a "normal desktop". It's doing very well, but if i start VirtualBox, and e.g.: install a guest on it, it just "freezez". I mean if there are disk activities on a VirtualBox guest, then the computer becomes unrespondable..even the mouse is laggin for about 50 minutes.. What could be the bottleneck? What could be the problem? If anyone has any tips/howtos to speed it up, please help! It has a normal 2,5" HDD, with 5400 RPM. Does it worth for me if i buy a 2,5" HDD with 7200 RPM? T7200 cpu, 4 GByte RAM, "vm.swappiness = 0". Thank you!

    Read the article

  • How to improve the HTML formatting in Evolution mail client

    - by Tom
    I have a question about viewing HTML emails in the Evolution mail client. Basically, I am receiving some emails that look lovely in Thunderbird but not in Evolution because the HTML rendering of Evolution isn't as advanced. Does anyone know how to improve the HTML rendering of Evolution? e.g. a plugin, tip, code patch, etc... The closest I've got is to right-click the email, "Save As...", save as a html file, then open in Firefox. Not exactly streamline! What emails can't it display well? We use the subversion revision control system which is set up to send an email whenever someone commits via svnnotify all nicely coloured via the --handler HTML::ColorDiff -d parameter. When Evolution fails to use the colours, I find it very had to read the raw diff.

    Read the article

  • mysql is not connecting after data directory change

    - by user123827
    I've changed data directory in /etc/my.cnf. datadir=/data/mysql socket=/data/mysql/mysql.sock I also moved mysql folder from /var/lib/mysql/ to /data/mysql Now when i connect to mysql i get following error: [root@youradstats-copy mysql]# mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) also when i see /var/logs/msqld.log i get following messages in that: InnoDB: Setting log file /data/mysql/ib_logfile0 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 120704 7:43:31 InnoDB: Log file /data/mysql/ib_logfile1 did not exist: new to be created InnoDB: Setting log file /data/mysql/ib_logfile1 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 InnoDB: Cannot initialize created log files because InnoDB: data files are corrupt, or new data files were InnoDB: created when the database was started previous InnoDB: time but the database was not shut down InnoDB: normally after that. 120704 7:43:36 [ERROR] Plugin 'InnoDB' init function returned error. 120704 7:43:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. I shut down mysql properly before doing these changes and then started it properly but dont know why getting these messages. please help to solve issue as i have changed socket path in my.cnf but still its pointing to old path...

    Read the article

  • Increasing resolution in FreeNX headless server

    - by syrenity
    Hi. I'm running a FreeNX server on headless CentOS machine, and the resolution seems to be locked on 800 x 600. I tried editing the xorg.conf file, but without success so far. Has anyone succeed of running the FreeNX remote under 1280 x 1024 resolution, and can post a working configuration? Thanks! P.S.: Here is the pastebin of my current xorg.cof file: http://pastie.org/835308

    Read the article

  • /var/log/secure user activity. also, httpd can not start without two users

    - by user52869
    hello, i found some strange informations in /var/log/secure file: Feb 10 02:02:04 server2364 usermod[30750]: unlock user `username1' password Feb 10 02:02:04 server2364 usermod[30811]: lock user `username2' password Feb 10 02:05:16 server2364 usermod[30992]: unlock user `username2' password Feb 10 02:05:18 server2364 usermod[31114]: unlock user `username1' password username1 and username2 are two usernames on system, that have no ability to login. for every night in 02:02h results like that are in /var/log/secure file. one more thing: files /etc/shadow, and /etc/shadow have timestamps 02:05h. what can be cause for it? next thing, if i remove those two accounts (username1 and username2), i can not start web server. can you help me with some ideas, am i hacked?

    Read the article

  • Machine check events logged

    - by GoldenNewby
    In /var/log/messages, this error occurred: Sep 19 13:18:15 wdc kernel: [2772302.630416] Machine check events logged Shortly there after, the entire server became unresponsive. This is in the log of the Dom0 for a Xen Server (running the latest version on Debian Squeeze). Can anyone shed some light on what this error means? Should I be ordering new hardware? Edit: Also, it seems to imply it logged something, where can I find that?

    Read the article

  • How to prevent Ubuntu from combining networks on 2 NIC server?

    - by SolarPower
    I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

    Read the article

  • What does "link to unknown" mean?

    - by Question Overflow
    I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

    Read the article

  • droid cam makefile understanding and error

    - by nerorevenge
    I tried installing the droid cam on my fedora 19 (64 bit) . Link to the droid cam application is here and whenever I try to install it , the Makefile which is as follows is invoked obj-m := v4l2loopback-dc.o all: make -C /lib/modules/`uname -r`/build M=`pwd` test: gcc test.c -o test clean: make -C /lib/modules/`uname -r`/build M=`pwd` clean insmod: sudo insmod v4l2loopback-dc.ko width=320 height=240 rmmod: sudo rmmod v4l2loopback-dc.ko and here is the error -- INSTALL: Webcam parameters: '320' and '240' -- INSTALL: Building v4l2loopback-dc.ko make -C /lib/modules/`uname -r`/build M=`pwd` make: *** /lib/modules/3.9.5-301.fc19.x86_64/build: No such file or directory. Stop. make: *** [all] Error 2 -- INSTALL: v4l2loopback-dc.ko not built.. Failure build happens to be a symbolic link.I was wondering what exactly is the makefile trying to and why is it failing?

    Read the article

  • Clients didn't switch to secondary DNS server during fail over

    - by The Digital Ninja
    I have two internal dns servers set up and all my servers have both of them in the resolv.conf Our main dns server went down and suddenly no server could see each other. I edited a few of the servers resolv.conf manually and committed out the first (down) dns server and that machine would instantly be able to ping again. What did I do wrong, does it not auto switch to the secondary dns server when it times out? # File managed by puppet nameserver 192.168.146.100 nameserver 192.168.159.101 ;nameserver 72.14.188.5 domain example.com search example.com

    Read the article

  • Bash Script Exits su or ssh Session Rather than Script

    - by Russ
    I am using CentOS 5.4. I created a bash script that does some checking before running any commands. If the check fails, it will simply exit 0. The problem I am having is that on our server, the script will exit the su or ssh session when the exit 0 is called. #!/bin/bash # check if directory has contents and exit if none if [ -z "`ls /ebs_raid/import/*.txt 2>/dev/null`" ]; then echo "ok" exit 0 fi here is the output: [root@ip-10-251-86-31 ebs_raid]# . test.sh ok [russ@ip-10-251-86-31 ebs_raid]$ as you can see, I was removed from my sudo session, if I wasn't in the sudo session, it would have logged me out of my ssh session. I am not sure what I am doing wrong here or where to start.

    Read the article

  • Good Free Ubuntu Server VMWare Image Needed

    - by Yaakov Ellis
    Can anyone recommend a good, free Ubuntu Server VMWare Image (or Virtual Appliance, as they call them)? I have looked on the VMWare VAM and there are literally hundreds to choose from. I am looking for something that can with very minimal effort serve as a development platform for LAMP applications (so it should have all of those installed, plus things like PhpMyAdmin). Bonus points if there is some way to create new Virtual Hosts (for developing and testing new sites) on Apache without having to go digging around conf files and guessing on the sytax.

    Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >