Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 355/1051 | < Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >

  • How to manage mounted partitions (fstab + mount points) from puppet

    - by Cristian Ciupitu
    I want to manage the mounted partitions from puppet which includes both modifying /etc/fstab and creating the directories used as mount points. The mount resource type updates fstab just fine, but using file for creating the mount points is bit tricky. For example, by default the owner of the directory is root and if the root (/) of the mounted partition has another owner, puppet will try to change it and I don't want this. I know that I can set the owner of that directory, but why should I care what's on the mounted partition? All I want to do is mount it. Is there a way to make puppet not to care about the permissions of the directory used as the mount point? This is what I'm using right now: define extra_mount_point( $device, $location = "/mnt", $fstype = "xfs", $owner = "root", $group = "root", $mode = 0755, $seltype = "public_content_t" $options = "ro,relatime,nosuid,nodev,noexec", ) { file { "${location}/${name}": ensure => directory, owner => "${owner}", group => "${group}", mode => $mode, seltype => "${seltype}", } mount { "${location}/${name}": atboot => true, ensure => mounted, device => "${device}", fstype => "${fstype}", options => "${options}", dump => 0, pass => 2, require => File["${location}/${name}"], } } extra_mount_point { "sda3": device => "/dev/sda3", fstype => "xfs", owner => "ciupicri", group => "ciupicri", $options = "relatime,nosuid,nodev,noexec", } In case it matters, I'm using puppet-0.25.4-1.fc13.noarch.rpm and puppet-server-0.25.4-1.fc13.noarch.rpm.

    Read the article

  • What are useful .screenrc settings?

    - by gyaresu
    Basically like some of my own that I've posted below. I'm looking for added functionality to the programme 'screen'. At the very least have a look at the last line for a fantastic 'menu bar' at the bottom of a screen session. ## gyaresu's .screenrc 2008-03-25 # http://delicious.com/search?p=screenrc # Don't display the copyright page startup_message off # tab-completion flash in heading bar vbell off # keep scrollback n lines defscrollback 1000 # Doesn't fix scrollback problem on xterm because if you scroll back # all you see is the other terminals history. # termcapinfo xterm|xterms|xs|rxvt ti@:te@ # These will let you use bind -c selectHighs 0 select 10 #these three commands are bind -c selectHighs 1 select 11 #added to the command-class bind -c selectHighs 2 select 12 #selectHighs bind -c selectHighs 3 select 13 bind -c selectHighs 4 select 14 bind -c selectHighs 5 select 15 bind - command -c selectHighs #bind the hyphen to #command-class selectHighs screen -t rtorrent 0 rtorrent #screen -t tunes 1 ncmpc --host=192.168.1.4 --port=6600 #was for connecting to MPD music server. screen -t stuff 1 screen -t irssi 2 irssi screen -t dancing 4 screen -t python 5 python screen -t giantfriend 6 these_are_ssh_to_server_scripts.sh screen -t computerrescue 7 these_are_ssh_to_server_scripts.sh screen -t BMon 8 bmon -p eth0 screen -t htop 9 htop screen -t hellanzb 10 hellanzb screen -t watching 3 #screen -t interactive.fiction 8 #screen -t hellahella 8 paster serve --daemon /home/gyaresu/downloads/hellahella/hella.ini shelltitle "$ |bash" # THIS IS THE PRETTY BIT #change the hardstatus settings to give an window list at the bottom of the ##screen, with the time and date and with the current window highlighted hardstatus alwayslastline #hardstatus string '%{= mK}%-Lw%{= KW}%50>%n%f* %t%{= mK}%+Lw%< %{= kG}%-=%D %d %M %Y %c:%s%{-}' hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{= kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B} %d/%m %{W}%c %{g}]'

    Read the article

  • Cannot build digiKam

    - by Tichomir Mitkov
    I'm trying to compile digiKam 2.8.0. I have installed the required libraries but cMake seems to stuck without any meaningful reason. Here is the output of cMake: $ cmake -DCMAKE_BUILD_TYPE=relwithdebinfo -DCMAKE_INSTALL_PREFIX=/usr/local . -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Found KDE 4.6 include dir: /usr/include -- Found KDE 4.6 library dir: /usr/lib64 -- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler -- Found automoc4: /usr/bin/automoc4 -- Local kdegraphics libraries will be compiled... YES -- Handbooks will be compiled..................... YES -- Extract translations files..................... NO -- Translations will be compiled.................. YES -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libmediawiki ----------------------------------------------------------------------------- -- The following external packages were located on your system. -- This installation will have the extra features provided by these packages. ----------------------------------------------------------------------------- * QJSON - Qt library for handling JSON data ----------------------------------------------------------------------------- -- Congratulations! All external packages have been found. ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkgeomap -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- kexiv2 found, the demo application will be compiled. -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkface -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- First try at finding OpenCV... -- Great, found OpenCV on the first try. -- OpenCV Root directory is /usr/share/opencv -- External libface was not found, use internal version instead... -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: kipi-plugins -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): extra/kipi-plugins/CMakeLists.txt:123 (FIND_PACKAGE) -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi CMake Warning at extra/kipi-plugins/CMakeLists.txt:139 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- Found GObject libraries: /usr/lib64/libgobject-2.0.so;/usr/lib64/libgmodule-2.0.so;/usr/lib64/libgthread-2.0.so;/usr/lib64/libglib-2.0.so -- Found GObject includes : /usr/include/glib-2.0/gobject -- Check for Ksane library in local sub-folder... -- Found Ksane library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libksane -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- Check Mediawiki library in local sub-folder... -- Found Mediawiki library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libmediawiki -- Check Vkontakte library in local sub-folder... -- Found Vkontakte library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkvkontakte -- Boost version: 1.38.0 -- libkgeomap: Found version 2.0.0 -- Found X11: /usr/lib64/libX11.so -- CMake version: cmake version 2.8.9 -- CMake version (cleaned): cmake version 2.8.9 -- -- ---------------------------------------------------------------------------------- -- kipi-plugins 2.8.0 dependencies results <http://www.digikam.org> -- -- libjpeg library found.................... YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libxml2 library found.................... YES (optional) -- libxslt library found.................... YES (optional) -- libexpat library found................... YES (optional) -- native threads support library found..... YES (optional) -- libopengl library found.................. YES (optional) -- Qt4 OpenGL module found.................. YES -- libopencv library found.................. YES (optional) -- QJson library found...................... YES (optional) -- libgpod library found.................... YES (optional) -- Gdk library found........................ YES (optional) -- libkdepim library found.................. YES (optional) -- qca2 library found....................... YES (optional) -- libkgeomap library found................. YES (optional) -- libmediawiki library found............... YES (optional) -- libkvkontakte library found.............. YES (optional) -- boost library found...................... YES (optional) -- OpenMP library found..................... YES (optional) -- libX11 library found..................... YES (optional) -- libksane library found................... YES (optional) -- -- kipi-plugins will be compiled............ YES -- Shwup will be compiled................... YES (optional) -- YandexFotki will be compiled............. YES (optional) -- HtmlExport will be compiled.............. YES (optional) -- AdvancedSlideshow will be compiled....... YES (optional) -- ImageViewer will be compiled............. YES (optional) -- AcquireImages will be compiled........... YES (optional) -- DNGConverter will be compiled............ YES (optional) -- RemoveRedEyes will be compiled........... YES (optional) -- Debian Screenshots will be compiled...... YES (optional) -- Facebook will be compiled................ YES (optional) -- Imgur will be compiled................... YES (optional) -- VKontakte will be compiled............... YES (optional) -- IpodExport will be compiled.............. YES (optional) -- Calendar will be compiled................ YES (optional) -- GPSSync will be compiled................. YES (optional) -- Mediawiki will be compiled............... YES (optional) -- Panorama will be compiled................ YES (optional) -- ---------------------------------------------------------------------------------- -- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: digiKam -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): core/CMakeLists.txt:156 (FIND_PACKAGE) -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi -- Check Kface library in local sub-folder... -- Found Kface library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkface -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- PGF_INCLUDE_DIRS = /usr/local/include/libpgf -- PGF_INCLUDEDIR = /usr/local/include/libpgf -- PGF_LIBRARIES = pgf -- PGF_LDFLAGS = -L/usr/local/lib;-lpgf -- PGF_CFLAGS = -I/usr/local/include/libpgf -- PGF_VERSION = 6.12.24 -- PGF_CODEC_VERSION_ID = 61224 -- Could NOT find any working clapack installation -- Boost version: 1.38.0 -- Check for LCMS1 availability... -- Found LCMS1: /usr/lib64/liblcms.so /usr/include -- Paralelized PGF codec disabled... -- Identified libjpeg version: 62 -- Found MySQL server executable at: /usr/sbin/mysqld -- Found MySQL install_db executable at: /usr/bin/mysql_install_db CMake Warning at core/CMakeLists.txt:310 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- libkgeomap: Found version 2.0.0 -- Found gphoto2: -L/usr/lib64 -lgphoto2_port;-L/usr/lib64 -lgphoto2 -lgphoto2_port -lm -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- PKGCONFIG() indicates that lqr-1 is not installed (install the package which contains lqr-1.pc if you want to support this feature) -- Could NOT find Lqr-1 (missing: LQR-1_INCLUDE_DIRS LQR-1_LIBRARIES) -- Found SharedDesktopOntologies: /usr/share/ontology -- Found SharedDesktopOntologies: /usr/share/ontology (found version "0.5.0", required is "0.2") -- -- ---------------------------------------------------------------------------------- -- digiKam 2.8.0 dependencies results <http://www.digikam.org> -- -- Qt4 SQL module found..................... YES -- MySQL Server found....................... YES -- MySQL install_db tool found.............. YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libjasper library found.................. YES -- liblcms library found.................... YES -- Boost Graph library found................ YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libkface library found................... YES -- libkgeomap library found................. YES -- libpgf library found..................... YES (optional) -- libclapack library found................. NO (optional - internal version used instead) -- libgphoto2 and libusb libraries found.... YES (optional) -- libkdepimlibs library found.............. YES (optional) -- Nepomuk libraries found.................. YES (optional) -- libglib2 library found................... YES (optional) -- liblqr-1 library found................... NO (optional - internal version used instead) -- liblensfun library found................. YES (optional) -- Doxygen found............................ YES (optional) -- digiKam can be compiled.................. YES -- ---------------------------------------------------------------------------------- -- -- Adjusting compilation flags for GCC version ( 4.5.1 ) -- Configuring incomplete, errors occurred! Actually this line shows a sign of error CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. 'version.h' doesn't exists instead there is a file 'version.h.cmake' I have installed libkdcraw (64-bit) from sources. I'm using OpenSuse

    Read the article

  • How to interrupt stuck bash tab completion?

    - by codeape
    Case: A Windows share mounted using samba over a flaky VPN connection (sometimes very slow, sometimes it drops) When doing tab-completion on filenames, my bash shell can freeze up if the VPN is slow or dropped when I am attempting the tab completion. Example: $ cp myfile.zip /mnt/winbox-c/Progr<tab> key pressed here Is there a bash key I can press to get bash out of its hung state when something like this happens?

    Read the article

  • Server load high, CPU idle. NFS the cause?

    - by Mech Software
    I am running into a scenario where I'm seeing a high server load (sometimes upwards of 20 or 30) and a very low CPU usage (98% idle). I'm wondering if these wait states are coming as part of an NFS filesystem connection. Here is what I see in VMStat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 1 0 1298784 0 0 0 0 16 5 0 9 1 1 97 2 0 0 1 0 1308016 0 0 0 0 0 0 0 3882 4 3 80 13 0 0 1 0 1307960 0 0 0 0 120 0 0 2960 0 0 88 12 0 0 1 0 1295868 0 0 0 0 4 0 0 4235 1 2 84 13 0 6 0 0 1292740 0 0 0 0 0 0 0 5003 1 1 98 0 0 4 0 0 1300860 0 0 0 0 0 120 0 11194 4 3 93 0 0 4 1 0 1304576 0 0 0 0 240 0 0 11259 4 3 88 6 0 3 1 0 1298952 0 0 0 0 0 0 0 9268 7 5 70 19 0 3 1 0 1303740 0 0 0 0 88 8 0 8088 4 3 81 13 0 5 0 0 1304052 0 0 0 0 0 0 0 6348 4 4 93 0 0 0 0 0 1307952 0 0 0 0 0 0 0 7366 5 4 91 0 0 0 0 0 1307744 0 0 0 0 0 0 0 3201 0 0 100 0 0 4 0 0 1294644 0 0 0 0 0 0 0 5514 1 2 97 0 0 3 0 0 1301272 0 0 0 0 0 0 0 11508 4 3 93 0 0 3 0 0 1307788 0 0 0 0 0 0 0 11822 5 3 92 0 0 From what I can tell when the IO goes up the waits go up. Could NFS be the cause here or should I be worried about something else? This is a VPS box on a fiber channel SAN. I'd think the bottleneck wouldn't be the SAN. Comments?

    Read the article

  • How do I align the bottom edges of two monitors with xrandr?

    - by denaje
    I have two outputs that I'd like to use on my laptop: LVDS1 - 1366x768 HDMI1 - 1920x1080 I set my monitors up like so: xrandr --output LVDS1 --auto --output HDMI1 --auto --right-of LVDS1 This is all well and good, but my laptop sits considerably lower than my external monitor, and with the top edges of the screens being aligned, it makes the jump from one screen to the other rather unintuitive. Is there a way I can align the bottom edges instead? I thought I could use the --pos flag to do this, but I have tried and not seen any difference (perhaps I do not know how to use it properly). EDIT: Solved. Thanks to tink's link, I deconstructed the Python script and discovered the way to do this is as follows: xrandr --output LVDS1 --pos 0x312 # 312 = 1280 - 768 xrandr --output HDMI1 --pos 1366x0 Not sure I understand exactly what the --pos flags are doing here, but it at least works!

    Read the article

  • Building a Social Networking website, should I have separate servers for certain parts of the site? [closed]

    - by Dylan Cross
    I have been working on building a social networking website, I'm pretty committed to this and I think I have something that could work out. I hope to be launching it January 1st, and so I have a question for server setup and such. Facebook has separate domain names/servers for their photos (and I don't know what else), so I would assume that by doing this it would help spread the server loads out. So I am wondering if it would make a very big difference in speed if I had my main server for basically everything, but had another server and such that the photos would be stored on and access them the same way that facebook does.

    Read the article

  • VNC failure on Xen

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • How to drop all subnets outside of the US using iptables

    - by Jim
    I want to block all subnets outside the US. I've made a script that has all of the US subnets in it. I want to disallow or DROP all but my list. Can someone give me an example of how I can start by denying everything? This is the output from -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:ftp state NEW DROP icmp -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And these are the rules iptables --F iptables --policy INPUT DROP iptables --policy FORWARD DROP iptables --policy OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -i eth0 --dport 21 -m state --state NEW -j ACCEPT iptables -A INPUT -p icmp -j DROP Just for clarity, with these rules, I can still connect to port 21 without my subnet list. I want to block ALL subnets and just open those inside the US.

    Read the article

  • Multithread http downloader with webui [closed]

    - by kiler129
    I looking for software similar to JDownloader or PyLoad. JD is pretty good but use heavy Java and for now have very weak web interface. PyLoad is awesome, include simple but powerful web-UI but downloading 10 files (10 threads each, so summary it's 100 connections running at around 8MB/s all) consume a lot of cpu - it's whole core for me. Do you know any lightweight alternatives? Aria2c is good for console but I failed to find any good webui, official one is good but after adding more files almost crashes Chrome :)

    Read the article

  • Getting VSFTP running on Fedora 14

    - by Louis W
    Having troubles getting VSFTPD running on Fedora 14. Here is what I have done so far, please let me know if I am missing something. When I try to connect through FTP it says connection time out. Installed VSFTP with yum yum install vsftpd Edited config file vi /etc/vsftpd/vsftpd.conf Started service and made sure it would always start up service vsftpd start chkconfig vsftpd on Added and configured a new user /usr/sbin/useradd upload /usr/bin/passwd upload usermod -c "This user cannot login to a shell" -s /sbin/nologin upload Added firewall rules iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A OUTPUT -p tcp --sport 20 -j ACCEPT service iptables save service iptables restart Checked netstat (In reply to comment below) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 23752/vsftpd

    Read the article

  • Bridging Network Devices with Multiple IPs

    - by Andy
    I have a small server with a single NIC that I am trying to get a bridge functioning on so that I can run KVM. On this NIC I have a couple IPs statically assigned to it: eth0 = 192.168.1.1 eth0:1 = 192.168.1.2 eth0:2 = 192.168.1.3 eth0:3 -> Assign the bridge to this I am attempting to set up a bridge using the following instructions: sudo brctl addbr br0 sudo brctl addif br0 eth0:3 sudo ifconfig br0 192.168.1.120 netmask 255.255.255.0 up sudo route add -net 192.168.1.0 netmask 255.255.255.0 br0 sudo route add default gw 192.168.1.1 br0 sudo tunctl -b -u root -t tap0 > /dev/null sudo ifconfig tap0 up sudo brctl addif br0 tap0 However, when I do the second command: sudo brctl addif br0 eth0:3 It puts the ENTIRE eth0 device into promiscuous mode. This knocks the server offline and inaccessible by anything other than locally. Is there a way to bridge JUST eth0:3 to br0 and not put the entire device into promiscuous mode?

    Read the article

  • SSL certificates work fine from command line but fail in script

    - by jrallison
    I'm trying to setup email notifications for my continuous integration server. I have a script which uses nail to send the email when the build works: #!/bin/bash echo "Build Worked!" | nail -A myisp -s 'Build Success' [email protected] When I run this from the command line with sh build-worked, it works and I receive the email. However, when I start the continuous integration server which executes the same script, I get the following error: nail: /opt/bitnami/common/lib/libssl.so.0.9.8: no version information available (required by nail) nail: /opt/bitnami/common/lib/libcrypto.so.0.9.8: no version information available (required by nail) Error with certificate at depth: 0 issuer = /C=ZA/ST=Western Cape/L=Cape Town/O=Thawte Consulting cc/OU=Certification Services Division/CN=Thawte Premium Server CA/[email protected] subject = /C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com err 20: unable to get local issuer certificate Continue (y/n)? could not initiate SSL/TLS connection: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed . . . message not sent. I must be messing some configuration, any ideas?

    Read the article

  • Passing PATH through sudo

    - by whitequark
    In short: how to make sudo not to flush PATH everytime? I have some websites deployed on my server (Debian testing) written with Ruby on Rails. I use Mongrel+Nginx to host them, but there is one problem that comes when I need to restart Mongrel (e.g. after making some changes). All sites are checked in VCS (git, but it is not important) and have owner and group set to my user, whereas Mongrel runs under the, huh, mongrel user that is severely restricted in it's rights. So Mongrel must be started under root (it can automatically change UID) or mongrel. To manage mongrel I use mongrel_cluster gem because it allows starting or stopping any amount of Mongrel servers with just one command. But it needs the directory /var/lib/gems/1.8/bin to be in PATH: this is not enough to start it with absolute path. Modifying PATH in root .bashrc changed nothing, tweaking sudo's env_reset and keepenv didn't either. So the question: how to add a directory to PATH or keep user's PATH in sudo?

    Read the article

  • Why doens't my Postgres user have permissions to add a Postgres database?

    - by orokusaki
    First, I ran: sudo su postgres createuser -U postgres foouser -P which worked fine, and I ran: createdb -U foouser -E utf8 -O foouser foodatabase -T template0 and got "permission denied: cannot create database" Firstly, should I even su as postgres to do operations like the first one (assuming my postgres data dir is owned by postgres), or is -U postgres from any user (assuming trust is used in pg_hba.conf) sufficient? Secondly, why am I running into this error? Is this because the user foouser is a non-superuser? Should I create foodatabase using the postgres user and simply -O foouser?

    Read the article

  • Broken fonts in konsole kde 4.3.4

    - by depesz
    I have strange situation - after some upgrade couple of days ago fonts in KDE konsole broke. To make it more specific - standard fonts look more or less ok, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in gnome-terminal. I usually use Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: gnome-terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

    Read the article

  • md5sum returns a different hash value than online hash generators

    - by Ravi
    On suse10, md5sum myname gives md5 hash as 49b0939cb2db9d21b038b7f7d453cd5d The file myname contains string "ravi" while some of the online md5 hash generators for the same string seem to give a different hash http://md5-encryption.com/ http://www.miraclesalad.com/webtools/md5.php They spit out the hash for "ravi" as 63dd3e154ca6d948fc380fa576343ba6 Why is there a difference in md5sum for the same string "ravi" ?

    Read the article

  • Apache configuration to access directory

    - by Felipe Hummel
    I'm on Ubuntu 9.10. My web application is in a directory on my /home/me/app . I want to configure Apache in such a way that I can access my app through a directory. For example: People can access my machine through domain.com. What I would like to do is access my web application (located at /home/me/app) through a directory, using something like: domain.com/myapp. How can I set up the apache configuration for this kind of behavior? Of course, I do not want to move all my application to /var/www/myapp. Thanks

    Read the article

  • Refresh devices - reconnect CF card drive by script (unplug-plug equivalent)

    - by Chris
    Hello I plug a completely clean CF-card into my USB card-writer. Then I dd a mbr block of 512 bytes size to the device, which contains the partition table and the definition of one partition. Problem: While "fdisk -l /dev/sdx" correctly displays the partition, it happens that there is no device like "/dev/sdx1" after these operations (as it was not present before). Unplugging and plugging the card-writer solves the problem and makes the device(s) appear. Since I use this procedure in a script, manually unplugging and re-plugging is no option whatsoever. Is there a way to "refresh" the devices or to "unplug and re-plug" the drive by script such that /dev/sdx1 appears? Thanks for any help, Chris

    Read the article

  • How can OpenGL graphics be displayed remotely using VNC?

    - by Jared Brown
    I am attempting to run a program that uses OpenGL to render a model in a viewport through VNC unsuccessfully. The error message I receive is - Xlib: extension "GLX" missing on display ":1.0". It was my understanding that VNC can be configured to render all graphics remotely and send a compressed screen grab from the display buffer to the local client. This would seem to negate the need for GLX extensions on the local client. Can VNC be configured this way and could you briefly describe how? Remote host: vncserver on RHEL 5 Local client: UltraVNC on Windows XP

    Read the article

  • Can I get advice on my nginx configuration (as a proxy in front of Jira and Confluence)?

    - by Nate
    I was wondering if I could get some advice on my nginx configuration. The config seems to be working, but I'm unsure if I'm doing everything properly. The basic idea is to have a Jira and Confluence server (in separate Tomcat instances) running on the same machine, with nginx in front to handle SSL for both. I want only SSL connections to be made to Jira/Confluence. Jira is running on 127.0.0.1:9090 and Confluence on 127.0.0.1:8080. Here is my nginx.conf, any advice or tips would be greatly appreciated. user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] $request ' '"$status" $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; # Load config files from the /etc/nginx/conf.d directory include /etc/nginx/conf.d/*.conf; # Our self-signed cert ssl_certificate /etc/ssl/certs/fissl.crt; ssl_certificate_key /etc/ssl/private/fissl.key; # redirect non-ssl Confluence to ssl server { listen 80; server_name confluence.example.com; rewrite ^(.*) https://confluence.example.com$1 permanent; } # redirect non-ssl Jira to ssl server { listen 80; server_name jira.example.com; rewrite ^(.*) https://jira.example.com$1 permanent; } # # The Confluence server # server { listen 443; server_name confluence.example.com; ssl on; access_log /var/log/nginx/confluence.access.log main; error_log /var/log/nginx/confluence.error.log; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header X-Forwarded-Proto https; proxy_set_header Host $http_host; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } # # The Jira server # server { listen 443; server_name jira.example.com; ssl on; access_log /var/log/nginx/jira.access.log main; error_log /var/log/nginx/jira.error.log; location / { proxy_pass http://127.0.0.1:9090/; proxy_set_header X-Forwarded-Proto https; proxy_set_header Host $http_host; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } }

    Read the article

  • Running multiple sites on a LAMP with secure isolation

    - by David C.
    Hi everybody, I have been administering a few LAMP servers with 2-5 sites on each of them. These are basically owned by the same user/client so there are no security issues except from attacks through vulnerable deamons or scripts. I am builing my own server and would like to start hosting multiple sites. My first concern is... ISOLATION. How can I avoid that a c99 script could deface all the virtual hosts? Also, should I prevent that c99 to be able to write/read the other sites' directories? (It is easy to "cat" a config.php from another site and then get into the mysql database) My server is a VPS with 512M burstable to 1G. Among the free hosting managers, is there any small one which works for my VPS? (which maybe is compatible with the security approach I would like to have) Currently I am not planning to host over 10 sites but I would not accept that a client/hacker could navigate into unwanted directories or, worse, run malicious scripts. FTP management would be fine. I don't want to complicate things with SSH isolation. What is the best practice in this case? Basically, what do hosting companies do to sleep well? :) Thanks very much! David

    Read the article

  • Why does my $LD_LIBRARY_PATH get unset when using screen with bash?

    - by UltraNurd
    This is related to http://superuser.com/questions/27376/why-does-my-ld-library-path-get-unset-launching-terminal, but a different set of symptoms. First, /usr/bin/screen is setuid as per the other question. Second, the default shell on this system is /bin/tcsh for various historical reasons, and we're not allowed to chsh to /bin/bash, so I typically run bash manually immediately after login. Third, I almost always use screen, but I want ctrl-a ctrl-c in screen to create a new bash "tab", so I always invoke bash first. That is: {~} $ echo $SHELL /bin/tcsh {~} $ bash [~] echo $SHELL /bin/bash [~] screen -U [~] ...and when reconnecting: {~} $ echo $SHELL /bin/tcsh {~} $ screen -dUr [~] echo $SHELL /bin/bash [~] However, my $LD_LIBRARY_PATH is there in tcsh, there in bash, but empty once I run screen; it is still present if I just run screen from tcsh, but then I get new tcsh "tabs" when I use ctrl-a ctrl-c in screen. Any ideas?

    Read the article

< Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >