Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 357/686 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• Network does not connect at boot

  - by Daniel Svozil

  I am on Ubuntu 12.04, fresh install. When I boot a machine, the boot screen says Connecting to network, later it is changed to something like Did not connect, trying for another 60s. However, the network does not connect at the boot. But I can then log in without a network connection, and if I start a network manager service manually from the terminal (sudo service network-manager start), the network is connected without any problems. Please, does anybody know where the problem could be? I don't want to wait more than two minutes every computer restart :-). I am new to Ubuntu (and also to upstart) so I am a bit lost. There is no /var/log/messages, in dmesg I found this record, though it may not be related: init: network-interface (eth1) pre-start process (492) terminated with status 1 init: network-interface (eth1) post-stop process (548) terminated with status 1 Thanks Daniel

  Read the article

• Horible lag on Xubuntu media center setup

  - by William

  I am setting up a media center running Xubuntu 11.10 as a media center. It is using the XFCE desktop enviroment. I have the NVIDIA drivers installed from the Additional Drivers program, and uninstalled all but the esennitial software. The computer is a Dell Dimension 3000. You can view detailed technical specifications here. The graphics card installed is a Geforce 8400 GS. I have installed all updates through Update Manager. What can I do to fix the horrible lag? It makes watching TV impossible.I have uploaded two videos of the lag, here and here. The second one does not have sound because the sound stops playing on some channels that lag a lot. The TV card is a Hauppage 950q USB, and the TV recording program is Kaffiene. Please help me with this, I am trying to do this to show how great Ubuntu is to the rest of the family.

  Read the article

• Ubuntu on USB does not boot on MacBook

  - by Sean H

  Ubuntu is installed on a 32 gigabyte flash-drive and it successfully booted every time up until I partitioned my hard-drive and installed Windows as a secondary boot (for programming reasons). Now every time I attempt to boot the Ubuntu flash-drive it boots into Windows XP. The same goes for partitions, I partitioned my hard-drive and installed Ubuntu and it only booted Windows XP. I am on a MacBook 6,1 with Mac OS X 10.6.8, 2 partitions, and I am using ReFit as my boot-loader. EDIT: I had Ubuntu working fine from FLASH DRIVE and at one point as a partition. I later uninstalled Ubuntu from my hard-drive and installed Windows. I then had to re-image my computer for certain reasons and I installed windows. Now when I attempt to boot anything other than Windows or OS X it boots into windows. Ubuntu was never on my hard drive while Ubuntu was on it. The flash-drive has been its own thing and has the boot-loader installed to it and loads from ReFit but boots into windows.

  Read the article

• Any enlightenment for understanding Object Oriented Programming? [closed]

  - by ????

  I studied computer science near the end of 1980s, and wasn't taught OOP that formally. With Pascal or C, when I understand the top-down design of functions, and the idea of black box, then everything just seem to make sense, as if there is a "oh I get it!" -- some kind of totally getting it and enlightenment feeling. But with OOP, all I know was the mechanics: the class, instance, method, inheritance, polymorphism, encapsulation. It was like, I knew all the "this is how it is", but never had the feeling of "I totally get it", the enlightened feeling. Would somebody be able to describe it, or point to a chapter in some book or paper which talks about OOP so that the reader can feel: "I totally get it!" on OOP?

  Read the article

• Why is the file /var/crash/_usr_lib_empathy_empathy-chat.1000.upload empty?

  - by user43816

  I just experienced an unusual crash: I tried to click on a name entry in the contact list of Empathy. A crash happened. Usually I am asked then if I'd like to report the error to Launchpad, and Launchpad opens. This time the error message was: "Excuse me. Ubuntu 12.04 noticed an internal error. If you notice further problems try to restart your computer. Send an error report to Launchpad to help removing this problem?" This time Launchpad did not open automatically. A new window opened and I could read the relevant error report. Later I found the error report in the file /var/crash/_usr_lib_empathy_empathy-chat.1000.crash. Why went the course of action this time differently from other crashes? Why is the file /var/crash/_usr_lib_empathy_empathy-chat.1000.upload empty?

  Read the article

• What will be a good python script (or your favorite language goes here) to test a system's performance and capabilities?

  - by dassouki

  Let's say you're in a computer store looking at 10 laptops, you want to really compare the system's capabilities. What will be an efficient "your fav language goes here" script that will allow you to do this? As an example, when I go to the store I usually open a macbook and a pro's terminal and write an equation in python, iterate it a million or so times, and time them. I like to compare the difference in time. What would be an ideal and simple script that can efficiently compare systems?

  Read the article

• How to use short breaks at work effectively for self-development?

  - by Alaudo

  At the moment my daily work as a developer requires me to have short 10-20 min breaks after every 2-3 hours. It would be nice if I could use those effectively to improve my expertise in programming or CS in general. I tried several things: Reading jokes online gets boring very soon. Trying to solve some (even the most simple) tasks from different code contests requires more time, as long as I have some idea of an algorithm the time is over. Reading a randomly picked Wikipedia-article about Computer Science: depending upon the article sometimes it requires more time and is not an easy reading for a break. So, I ended up reading StackOverflow questions and answers with most votes: that is entertaining and educative. Do you have any other suggestions?

  Read the article

• Is it worth it to learn some programming before college?

  - by Howlgram

  I'm in my last year of highschool and I am very interested in programming, the thing is I don't know if it could be worth it to start learning programming now, im afraid that when I get to college they might just teach all I might have learned in a few classes making a waste the time spent on learning that before college. Right now I'm on my last year of highschool and I know absolutely nothing about programming. There are other similar questions where people answer saying it is good to learn beforehand, but I doubt their situation might be like mine, maybe they had much more time to learn programming (as if they were not on their last year of highschool) before college so they could learn some serious skills, besides they say they already know at least the basics about a language, instead, I know nothing and I have no idea how much could I learn this year. If it wasn't clear I want to study computer's science

  Read the article

• Where to train while earning to be a Web Programmer

  - by user3295525

  Good day everyone. I'm a fresh graduate of Bachelor of Science in Computer Science and I really love coding in web. But my skills are not that high that's why I want to train while earning in a company but there are so few companies that offer it here. Web Programming is a passion for me and i really love it that's why i want to enhance my skills for my self and for the benefit of the company that will hire me. Do you have any suggestions or recommendations that I can use because I really need a mentor cause my self studying is in limit now. Good day everyone and God bless. P.S. I really love web programming.

  Read the article

• Unity Desktop not loading and ccsm method not working

  - by slimy-spork

  I installed Ubuntu 13.04 x86_64 on my HP Pavillion DV7-6c60us. It installs fine and works until I update. I run the software updater and reboot as it requests after. When my computer comes back on I get the desktop background but the rest of the Unity desktop doesn't load. I've tried the ccsm method and re-enabling but it just de-enables itself. I've also tried installing the gnome desktop but that does nothing for me either. I really want to switch to Ubuntu but this is causing issues. P.S. I've also tried using 12.10 and 12.04 with no dice.

  Read the article

• First languages with generic programming support

  - by oluies

  Which was the first language with generic programming support, and what was the first major staticly typed language (widely used) with generics support. Generics implement the concept of parameterized types to allow for multiple types. The term generic means "pertaining to or appropriate to large groups of classes." I have seen the following mentions of "first": First-order parametric polymorphism is now a standard element of statically typed programming languages. Starting with System F [20,42] and functional programming lan- guages, the constructs have found their way into mainstream languages such as Java and C#. In these languages, first-order parametric polymorphism is usually called generics. From "Generics of a Higher Kind", Adriaan Moors, Frank Piessens, and Martin Odersky Generic programming is a style of computer programming in which algorithms are written in terms of to-be-specified-later types that are then instantiated when needed for specific types provided as parameters. This approach, pioneered by Ada in 1983 From Wikipedia Generic Programming

  Read the article

• How to enable ping in windows firewall in windows server 2008 r2

  - by ybbest

  If you are unable ping your windows server 2008 r2 machine or if you have a “one way ping problem”. You need to check whether you have it enabled in your windows firewall.To enable it , you need to do the following: 1. You need to go to control panel >> windows firewall >> Advanced settings 2. Go to Inbound Rules and enable File and Printer Sharing (Echo Request – ICMPv4-In),after you have done this ,your computer will become pingable.

  Read the article

• How to fix a gstreamer error

  - by BJsgoodlife

  I upgraded to 14.04 and now gstreamer is not working. What I am trying to accomplish is to hear the audio input on my computer coming from a ham radio. This is the command that I am using: gst-launch pulserc ! pulseink. This is the error message that I am receiving: ERROR: pipeline could not be constructed: no element "pulserc". I am wondering if I should purge gstreamer, or if there is another command that I should put it. Thank you again everyone for all of your help.

  Read the article

• ubuntu 12.04 nvidia breaks resolution

  - by Terje Kristiansen

  i am running ubuntu 12.04 64-bit and i have a nvidia Geforce GT 650m, it was running fine with 1920 x 1024, except a lot of tearing everytime i ran videos. I thought activating the nvidia driver maybe would fix this. When entering "nvidia X server setting" it says " you do not appear to be using nvidia X driver. Please edit your X configuration file ( just run "nvidia-xconfig" as root), and restart the X server. I did and then the computer reboots with a resolutioin of 640 x 480. How can i restore the previous settings, or preferably get it to show full resolution without tearing ? When i enter "nvidia X Server Settings" now it still says the same as above, " do not appear to be using nvidia X driver" when i go to "system settings, additional drivers" it says nvidia_current -- "This driver is activated but not currently in use" astr0

  Read the article

• Brightness controls doesn't work on a MacBook Pro 5.5

  - by Jeff Labonte

  I recently installed Ubuntu on my MacBook pro 5.5 (mid 2009). I have a problem with the brightness control. The thing is, when I try to reduce the brightness of my display which would help my battery life dramaticlly is doesnt work. I tried to use the system preference but no succes. I tried to look of it changes something if disconnect the computer from the charge I the screen will dimm but once against I failed. I tried many things such as pommed or Many other little things that I have had read on forums.

  Read the article

• Grub Rescue Error: Unknown Filesystem

  - by James

  I was trying to dual boot Windows with Linux (linux installed first). I read that it was easier to do so if windows was installed first. So I tried to install windows, by creating a partition for it. There wasn't enough room on the drive so I tried changing the filesystem of my existing partition to support windows. Now whenever I try to start my computer I get the grub rescue screen. I've tried booting from CD and USB with ubuntu and also with windows, but nothing happens. I ran ls in grub rescue and got hd0, (hd0,msdos5), cd (with an install disc inserted), fd0, and fd1. However if I run ls on any of these I receive the error: unknown filesystem. Can anyone help me out?

  Read the article

• How to merge two .iso images

  - by pgrytdal

  I am following this tutorial to install Android onto my computer VIA Virtual Box. My problem is, they want you to download liveandroidv0.3.iso.001 liveandroidv0.3.iso.002 then they want you to merge these two files with cat liveandroidv0.3.iso.001 liveandroidv0.3.iso.002 > liveandroidv0.3.iso in the Terminal. The problem is, when I run the command, I get the following output cat liveandroidv0.3.iso.001 liveandroidv0.3.iso.002 > liveandroidv0.3.iso cat: liveandroidv0.3.iso.001: No such file or directory cat: liveandroidv0.3.iso.002: No such file or directory So, I was wondering if there was an alternative way to merge these files? Or if you guy's could help me merge them this way? Extra info: OS: Ubuntu 12.10 I downloaded the files to my /downloads folder in my home directory.

  Read the article

• Why does Network-Manager close when it cannot bind to any connection?

  - by Agmenor

  When Network-Manager is not able to bind my Ubuntu to any connection, after a while it closes. The icon in the notification area (or indicator area) disappears, and it does not run any more. For instance this happens when there is really no ethernet network nor wireless one. Nonetheless this is a problem, since I often plug in my ethernet cable long after having booted my computer. As a hack I therefore hit Alt + F2, and type nm-applet. But I am not satisfied with this solution, because I think it is not intuitive enough. Is there a way to keep Network-Manager always running? I have Network-Manager 0.8.1 on Ubuntu 10.10, but this has been so for a long time, at least for one year.

  Read the article

• After upgrading to 13.04 Unity interface is not showing

  - by ?????? ?????

  I've upgraded to Raring last night. The upgrade itself went okay, no errors. But when I rebooted the computer afterwards and logged in to my Unity session, all I could see was the Desktop background (together with Desktop icons), and no Unity interface. The Super button shortcut wasn't showing the Dash, there was no top panel etc. Please see the screenshot. As a hint, I'm suspecting it's got something to do with my switchable graphics. I'm running Ubuntu on Acer Aspire AS5830TG with nVidia GT540M and an Intel integrated card. In 12.10 I was using Bumblebee to manage the graphic card switching. During the upgrade I saw something related to nvidia had to be uninstalled, but didn't pay much attention to it. I can't be sure if it has anything to do with my problem though. What could possibly go wrong?

  Read the article

• Ubuntu 13.04 on UEFI system with Windows Boot Manager as the main loader

  - by Mehrdad

  On my old laptop (legacy BIOS, MBR disk), this was perfectly possible to get working: I turn on the computer and see the Windows Boot Manager I use EasyBCD (or BootPart, or something else) to add an option to the BCD menu which allows me to boot into GRUB, and then into Ubuntu I can't figure how to do this on my new laptop (UEFI, GPT disk), whether in UEFI or legacy mode. Currently I've installed (and even booted!) Ubuntu on my laptop, but only with the help of an external GRUB (on a USB flash drive). How can I add GRUB as an option in the Windows Boot Manager on a UEFI laptop? (No, I don't want to change my primary boot loader. So no, I don't want to overwrite the Windows boot loader with GRUB.)

  Read the article

• How do I fool 12.10 to think it uses Unity2d in order to get the resolution my screen can use?

  - by Konstapel Kask

  On a laptop (model older) I have two screens (one built in, one external). I wish to use them both at the same time, but the settings app complains: Requested size (2944, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. The problem though, Unity 2D has been discontinued. I have forced Ubuntu to render Unity in 2D mode (with the help of echo export UNITY_LOW_GFX_MODE=1 >> .xprofile in accordance to this askubuntu post. But the error message still remains. How can one get the resolution that my computer supports? Or, how can I assure Ubuntu that it truly does use a 2D session?

  Read the article

• How to install hardware drivers for my laptop

  - by John Flisk

  Everytime I change the OS I usually format my laptop. It is an HP tx-2 Touchsmart. It has a touchscreen and additional hardware that isn't working (i.e. volume control buttons and the network discovery) If I was on windows I would just download the hardware drivers from the HP website. How do I go about installing the software for the built-in hardware of my laptop? I am new to the community and I really want to get this computer working like it used to, to get the full Ubuntu experience. Please direct me, thank you.

  Read the article

• Breaking into database administration

  - by user603794

  Hello to all, I am brand new on this site and look forward to interacting with each of you. I am graduating in June with my Bachelors Degree in Computer Information Systems with hopes of become a DBA in the future. I am currently taking a Database class now and studying SQL Server/T-SQL on the side. My experience in IT is limited to managing an Access database at my last employer for two years. What are the chances of landing a junior DBA position after I graduate?

  Read the article

• Information about SATA, IDE (PATA) controllers

  - by Adam Matan

  I have a remote computer on which I want to install a new hard drive for rsync backup. The problem is, I don't know what controller technology is used (PATA, SATA, SATA2, ...) and how many available slots are left. I want to spare me an unnecessary drive just for opening the chassis and looking into wires. How do I query the SATA or PATA controllers? I'm interested in the following points: Which controllers exist in the machine How many (and which) disks are attached to each controller How many available slots are there

  Read the article

• How do I stop Ubuntu Precise freezing/hanging

  - by artfulrobot

  At least once a day I lose work on my (2 different) Intel i5 machines running Ubuntu 12.04. The entire system will freeze/lock-up/hang, and never return. At this point nothing works; even the caps lock key doesn't toggle the light on the keyboard; Ctrl-Alt-F1 won't do anything either. askubuntu.com is apparently where I'm directed for support. I suspect this is a kernel bug. But I simply can't keep losing work like this, so I'm anxious to try whatever it takes to get the thing reliably working. Can you suggest something I can try to fix the problem an existing bug I can follow progress on and contribute to (from users/tester's POV) the most constructive way I can contribute to helping fix the problem, keeping in mind that I do need the computer (so can't do things that might "brick" it!)

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >