Search Results

Search found 26146 results on 1046 pages for 'white box testing'.

Page 361/1046 | < Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

    - by Corey Kennedy
    What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help!

    Read the article

  • SSH traffic over openvpn connection freezes when I cat a file

    - by user42055
    I have an openvpn (version 2.1_rc15 at both ends) connection setup between two gentoo boxes using shared keys. it works fine for the most part. I use mysql, http, ftp, scp over the vpn with no problems. But when I ssh from the client to the server over the vpn, weird things happen. I can login, i can execute some commands. But if i try to run an ncurses application like top, or i try to cat a file, the connection will stall and I'll have to sever the ssh session. I can, for example, execute "echo blah; echo .; echo blah" and it will output the three lines of text over the ssh session fine. But if i execute "cat /etc/motd" the session will freeze the moment I press enter. I compiled openvpn 2.1.1 on my mac and copied over my config directory from my gentoo client. The mac connected and ssh sessions worked fine without freezing. I then compiled it on my older gentoo box (2.6.26 kernel) which I am retiring due to a dying hard drive, and ssh over it also works perfectly. Why does it fail on my brand new gentoo box ? I've tried compiling three different kernels in case it was that, but other than that there should be no difference between my older and my newer gentoo boxes that I can think of. Any suggestions on what's wrong ?

    Read the article

  • Backup solution, or, how Duplicati duped me

    - by blarghmaster
    TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

    Read the article

  • Outlook 2007/2010 autodiscovering old Exchange info

    - by Dan
    I currently have an Exchange setup as follows: two Exchange 2003 servers clustered together set up as the current mailbox stores, one Exchange 2003 setup as a frontend, one Exchange 2007 set up as a frontend (was set up for testing by my predecessor, never really used intentionally), and now four Exchange 2010 servers - two mailboxes in a DAG and two with Hub/CAS. Everything seems to be working fine with one exception - Outlook 2007/2010 clients are still autodiscovering the test 2007 frontend and not the 2010 CAS array. I know this because there's an expired cert on the 2007 box so the client displays a cert error when you attempt to autocreate the outlook profile. From what I've read, there is an SCP (Service Connection Point) in AD that is pointing to the old server and it is getting returned first, causing Outlook to try it first. How can I prevent Outlook from even attempting to connect to this 2007 box from now on? http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html When Outlook 2007 is installed on a domain joined workstation then the Outlook client will query Active Directory for the Autodiscover information. Active Directory will return a list of SCP’s and the Outlook client will automatically select the first SCP in this list. Using the information found in the SCP the Outlook client will contact the Client Access Server for its configuration information and the Outlook client will be configured automatically.

    Read the article

  • ESX 4.0 space: DASD, NAS, or ?

    - by thormj
    I put together an ESX box for better management, but its performance is a WTF item; I'm a noob at dealing with ESX, so I'm looking for a laundry-list of reading material to help me straighten this out so I can go back to .NET programming. Current storage system: We're running Raid5+Hotspare (8x500 GB spindles) on a PERC6i on a Dell 2910. Due to ESX limitatios, the PERC is showing the storage as 1x2TB + 1x800GB "partitions." I'm not sure of the setup's configuration (stride / stripe / ???) at all. Our Applications We have a SBS server as well as a minor (2x50 GB, but growing at 10GB/month) database server... Our application that lives on the database VM is CPU and I/O insense; it's a database churning excercise mixed in with a lot of computation on the data (fixing that performance is what I'm supposed to be working on)... Perfomance Issue When I do a backup, restore, or worse (copy a backup from 1 vm to another to move it to the QA VM), the entire system slows to a crawl (even "unrelated" VMs). I originally thought a DASD situation would be quite good since you had PCI-x bandwidth, but the systemwide slowdown is killing productivity. Questions What should I do to make an intelligent decision about NAS vs RAID vs SAN vs DASD? Are there sweet spots/ugly spots in the storage setup? Can you use a SSD PCI-X card in ESX for the tempdb? Good/Bad idea? Is there any way to "share" some image in a copy-on-write fashion? Most of the "Backup-Copy-Restore" is to "put a clean image on the dev boxes"; if I could have them "share" the master image, the "big copy" (2x50 GB) would only need to be done once per week instead of once per dev per week...[runtime performance isn't a concern with the dev boxes, but the backup/copy/restore kills production, SBS, and everything else on the box]

    Read the article

  • filesystem compatible with freenas and windows

    - by Daniel
    Hi all, I'm planning on using FreeNAS (was considering openfiler but freenas seems simpler) for my home NAS box running off ESXI. I have managed to get local sata drives to mount in ESXI (http://serverfault.com/questions/216902/esxi-add-datastore-without-partitioning). I've had one of the drives fail on my before and I was able to retrieve most of the data off it using windows tools (I'm not much of a linux guy I know enough to be dangerous!). If I go the freenas route in the event that something goes bad what would be the best file system to use so that I could pop the drive out of the freenas box (vm) and put it in another pc running windows so I could try and run various recovery tools to get the data back. All in all its not a major problem if I lose the data just would be a bit annoying, so I'm not looking for suggestions around backing up etc. I was considering using NTFS that the drives are already formatted as but it appears that while freenas does support NTFS that its a bit buggy and not 100% reliable, anyone know if this is still true? Read that on a forum somewhere.

    Read the article

  • SQL Server 2008 Cluster Installation - First network name always fails

    - by boflynn
    I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

    Read the article

  • Migrating to CF9: trouble getting JRun working with SSL

    - by DaveBurns
    I have a client on MX7 who wants to migrate to CF9. I have a dev environment for them on my WinXP machine where I've configured MX7 to run with JRun's built-in web server. I've had that working for a long time with both regular and SSL connections. I installed CF9 yesterday side-by-side with the existing MX7 install to start testing. The install was smooth and detected MX7, adjusted CF9's port numbers for no conflict, etc. Testing started well: MX7 over regular and SSL still worked and CF9 worked over regular HTTP. But I can't get CF9 to work with SSL. I installed a new certificate with keytool, FireFox (v3.6) complained about it being unsigned, I added it to the exception list, and now I get this: Secure Connection Failed An error occurred during a connection to localhost:9101. Peer reports it experienced an internal error. (Error code: ssl_error_internal_error_alert) I've been Googling that in all variations but can't find much help to get past this. I don't see any info in any log files either. FWIW, here's my SSL config from SERVER-INF/jrun.xml: <service class="jrun.servlet.http.SSLService" name="SSLService"> <attribute name="enabled">true</attribute>` <attribute name="interface">*</attribute> <attribute name="port">9101</attribute> <attribute name="keyStore">{jrun.rootdir}/lib/mykey</attribute> <attribute name="keyStorePassword">*deleted*</attribute> <attribute name="trustStore">{jrun.rootdir}/lib/trustStore</attribute> <attribute name="socketFactoryName">jrun.servlet.http.JRunSSLServerSocketFactory</attribute> <attribute name="deactivated">false</attribute> <attribute name="bindAddress">*</attribute> <attribute name="clientAuth">false</attribute> </service> Anyone here know of any issues re setting up SSL and CF9? Anyone had success with it? Dave

    Read the article

  • Epson Artisan 800 on Ubuntu/Linux

    - by Tim Lytle
    Update for Ubuntu 10.04: Printing should work 'out-of-box', scanning still needs the newer sane backend. Looking for a known good way to setup an Epson Artisan 800 on Ubuntu specifically or any linux box in general. It is a printer/scanner with ethernet/wifi/usb. I'd like to use it as a network printer/scanner being able to do both from my Windows and Ubuntu machines; however, if it needs to be physically connected to a computer (preferably the Ubuntu machine) that is doable (again, then sharing print/scan functions to the network). Basically, I'm looking for someone who has used this printer/scanner (or similar) in a multi-platform environment to share how the set it up and how well it worked. Updated: A little more information, like most printers (I expect) the documentation for the printer basically says, "don't use plug-n-play, run our setup CD from your Windows/Mac system", to do anything (set it up for network use even). I guess that's to make it easy for anyone else to setup, but when you're looking to use it with an unsupported (by Epson's documentation) OS, you're just stuck on your own. What I was hoping for was someone who could say, "Forget the bundled software, do [this] to set it up on wifi manually, install [this] to connect to the scanner from [os], printing works with [this] driver - at least that's how I set it up." I'll will (and have so far) use the information here, and post my own setup when I'm done, if there's no one else out there with that experience.

    Read the article

  • Windows Server 2008 backup VHD's - is it possible to mount/open in Windows 7?

    - by Simon
    Hi All, Is it possible to mount the VHD files created by the Windows Server 2008 backup utility onto a Windows 7 (release) client? Following an array failure I was very worried that there was a problem with both the backup sets on different USB drives as attaching the VHD to a Win 7 box did not show the expected structure (instead they behaved like unformatted disk space). Subsequently, I've attached the backup drive to a 2008r2 machine that I'd intended to be the replacement and the backup set can be browsed without issue (seemingly). When the new disks arrive I'll go through the recovery process and see where we are, but it looks promising so far. Is it simply the case that you can't take server created VHD's and mount them on desktop machines? (Rather than hyper-ventilating at the thought of years of lost photos and email, I'm now just mildly curious) Edit:One thing that has confused things is that the backup utility on Win7 is more restrictive about restoring from external devices than the equivilent on 2008r2. With r2, I can restore files 'from another server' and browse to external storage. Win7 only allows the back to be located on a network share. Once my box of new disks arrive and I've got something to restore onto, I'll move the smaller of the backup VHDs onto network storage reachable by Win7 and see if the VHD is readable. I haven't read up on the VHD process used by the backup app - I'm assuming it's a base VHD and differencing files used for incremental backups and that the restore app understands this. Finally: In retrospect the question should have been, 'can I restore a 2008r2 backup set via a Win 7 client' Thanks

    Read the article

  • Shared printer hosted by Windows 7 to XP peers [closed]

    - by Alistair Knock
    Possible Duplicate: Add Network Printer drivers in Windows 7/Server 2008 R2? A Canon Pixma ip4600 installed all by itself when connected to a Windows 7-64 bit machine. I then updated it with the add-on Canon provide to give additional functionality. I then wish to share it with a box which is running Windows XP 32-bit. The XP box can see the printer but can't find a driver from the 7 machine, which is fine. I ask the 7 machine to get the x86 drivers, but it can't. I install the 32-bit XP drivers on the XP machine, but unlike previous Canon drivers (which unzip to give an .inf file), they assume a local printer and partially give up. I find the .inf file in the Program files\CanonBJ\... directory. Neither the XP machine, nor the 7 machine when the CanonBJ directory is shared to it, is happy with the .inf file. I attempt to install the 32-bit drivers on the 64-bit 7 machine, which, understandably, fail. Where do we go from here? (I apologise for posting in the first-person, I'm not sure why this was)

    Read the article

  • Desktop bigger than screen

    - by alex
    I am using MSI U115 11" netbook (OS: Windows XP Home, graphics card: Intel Graphics Media Accelerator 500) and today after I switched it on, desktop was bigger than screen. To be exact: screen resolution was set to the lowest possible and I could move mouse outside of screen (but only below - left, right and up worked normally, mouse could not exceed screen boundaries). I changed resolution back to normal, but the problem with desktop being bigger than screen remained (as before, only lower part - cannot see task bar, etc. When I hit windows button on keyboard, only upper part of menu start is visible). What I already tried was changing all kind of graphics and screen settings - none of them helped. I also tried to restore the system to few days before, but it didn't help neither. What can I do to make the desktop look "normally"? EDIT: Some additional info regarding screen: Sorry it's in polish - but let me explain. There are two screens I can choose (Monitor domyslny means default screen), but the second one (the default one) is not available. After I choose it and click apply number 1. is used (and as you can see it has only two resolutions available. There are more in the second one - but without 1024x600 though). The two ticked and grayed out options here are Use this screen as the main one and Enlarge Windows desktop to match this monitor's size. Too bad I cannot change them. When I choose the second screen, the first box is unchecked and grayed out. The second box is available to be changed but it doesn't matter anyway as after applying changes it reverts to the first screen anyway. EDIT: Intel Graphics Media Control Panel screenshot.

    Read the article

  • How to disable irritating Office File Validation security alert?

    - by Rabarberski
    I have Microsoft Office 2007 running on Windows 7. Yesterday I updated Office to the latest service pack, i.e. SP3. This morning, when opening an MS Word document (.doc format, and a document I created myself some months ago) I was greeted with a new dialog box saying: Security Alert - Office File Validation WARNING: Office File Validation detected a problem while trying to open this file. Opening this is probably dangerous, and may allow a malicious user to take over your computer. Contact the sender and ask them to re-save and re-send the file. For more security, verify in person or via the phone that they sent the file. Including two links to some microsoft blabla webpage. Obviously the document is safe as I created it myself some months ago. How to disable this irritating dialog box? (On a sidenote, a rethorical question: Will Microsoft never learn? I consider myself a power user in Word, but I have no clue what could be wrong with my document so that it is considered dangerous. Let alone more basic users of Word. Sigh....)

    Read the article

  • Vagrant doesn't detect chef-solo unless re-installed

    - by nightowl
    I am using Vagrant to test my Chef recipes in Amazon AWS, and I am encountering an irritating issue: I initially assumed that Vagrant would install chef itself (as it does when using Virtual Box as the provider) but it seems that this needs to be done using the cloud-init script. However, even after I successfully installed the chef gem via cloud-init I was still getting the following error: The chef binary (eitherchef-soloorchef-client) was not found A quick google of this error suggested three probable causes: Chef had failed to install It had installed, but the directory was not in the $PATH environment variable It had installed and in the $PATH but with incorrect permissions I logged in and double checked; chef-solo and chef-client were installed; The path variable for the user, sudo and root all included /usr/local/bin and permissions were all fine. I managed to solve this problem by uninstalling and reinstalling the gem using sudo gem install chef. I don't understand why this should resolve the issue and it is a bit of a problem if I have to ssh into a test box and manually install the gem every time. Does anyone have any suggestions why this might be happening?

    Read the article

  • Bad font anti-aliasing in Ubuntu

    - by Juliano
    I'm switching from Fedora 8 to Ubuntu 9.04, and I can't seem to get it to get a good font anti-aliasing to work. It seems that Ubuntu's fontconfig tries to keep characters in integral pixel widths. This makes text more difficult to read, when 1 pixel is too thin and 2 pixels is too thick. Check the image below. In Fedora, when fontconfig anti-aliasing is enabled, fonts have their thickness proportional to the font size. Below, the thickness is different for 8, 9 and 10pt sizes. In Ubuntu, on the other hand, even when anti-aliasing is enabled, all 8, 9 and 10pt sizes have 1 pixel thickness. This makes reading larges amount of text difficult. I'm using the very same home directory, and I already checked that X resources are the same in both systems: ~% xrdb -query | grep Xft Xft.antialias: 1 Xft.dpi: 96 Xft.hinting: 1 Xft.hintstyle: hintfull Xft.rgba: none GNOME settings: ~% gconftool-2 -a /desktop/gnome/font_rendering antialiasing = grayscale hinting = full dpi = 96 rgba_order = rgb So, the question is: What should I change in the new box (Ubuntu) in order to get anti-aliasing like in the old box (Fedora)?

    Read the article

  • L2TP over IPSec VPN with OpenSwan and XL2TPD can't connect, timeout on Centos 6

    - by Disco
    I'm setting up LT2p over IPSec on my Centos 6.3 fresh install. I have iptables flushed, permit all. Whenever I try to connect, i get a 'no reply from vpn' and nothi Here's my ipsec.conf file (Server is 1.2.3.4) : config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=1.2.3.4 leftprotoport=17/1701 right=%any rightprotoport=17/%any My /etc/ipsec.secrets 1.2.3.4 %any: PSK "password" My sysctl.conf (appened lines) net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.default.log_martians = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.icmp_ignore_bogus_error_responses = 1 Here's what 'ipsec verify' gives: # ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.32/K2.6.32-279.19.1.el6.x86_64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] And I see xl2tpd is listening on 1701/udp : udp 0 0 1.2.3.4:1701 0.0.0.0:* 2096/xl2tpd

    Read the article

  • Exchange 2010 DAG + VMWare HA = no support?

    - by Dan
    We currently have an Exchange 2003 clustered environment (two machine cluster) that we're looking to upgrade to 2010. We recently purchased a VMWare virtualization environment (three Dell R710's with an EMC NS-120 serving up NFS datastores - iSCSI is available) that we wish to use for this new environment. I'm seeing that Microsoft does not support Exchange 2010 DAGs with a virtualization high availability solution (see links below). I would like to utilize the DAG to ensure the data stays available if one host goes down, and HA to ensure that if the physical host goes down, the VM will come back up on the other available host. Does anybody know why MS does not support this? VMWare HA will only restart the VM if it is hung/down - I don't see any difference between this and restarting the physical box if someone pulled the power... Will we only run into issues with support if it has something to do with HA/DAG failover or will they see we have HA and tell us to put it on a physical box even if it has nothing to do with HA? If we disable HA for these VM's will that satisfy them on a support case? Has anybody set up an Exchange 2010 DAG on VMware with HA enabled? Will they have any issues with using an NFS datastore? We have much greater flexibility on the EMC with NFS vs iSCSI, so I would prefer to continue utilizing that. Thanks for any input! http://www.vmwareinfo.com/2010/01/verifying-microsoft-exchange-2010.html Take a look at the second image under "Not Supported" http://technet.microsoft.com/en-us/library/aa996719.aspx "Microsoft doesn't support combining Exchange high availability solutions (database availability groups (DAGs)) with hypervisor-based clustering, high availability, or migration solutions. DAGs are supported in hardware virtualization environments provided that the virtualization environment doesn't employ clustered root servers."

    Read the article

  • iptables forwarding to a dummy interface

    - by madinc
    Hi, I'm trying to accomplish the following: I have a box with a service listening on a dummy interface (say 172.16.0.1), udp port 5555. Now what I'd like to do is to take packets that arrive on interfaces eth0 (1.1.1.1:5555) and eth1 (2.2.2.2:5555) and forward them to the service on the dummy interface, and have replies go back to clients out the same physical interface they came in. Clients must think they're talking to 1.1.1.1:5555 or 2.2.2.2:5555. I think I need a mix of iptables rules and packet marking, plus some iproute rules (if it's possible at all). What I tried is to catch packets coming in from eth0 and eth1, udp port 5555, and mark them with 1 and 2 respectively, and --save-mark in the connmark. Then I used a DNAT to 172.16.0.1. The service seems to be getting the packets. Now I'm not sure how to do the reverse. It seems that for packets originating from the box, you can't do anything before the routing decision, but that would be the place to restore the marks, and thus make a routing decision based on those. Here's what I have so far: iptables -t mangle -A PREROUTING -d 1.1.1.1 -p udp --port 5555 -j MARK --set-mark 1 iptables -t mangle -A PREROUTING -d 2.2.2.2 -p udp --port 5555 -j MARK --set-mark 2 iptables -t mangle -A PREROUTING -d 1.1.1.1 -p udp --port 5555 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -d 2.2.2.2 -p udp --port 5555 -j CONNMARK --save-mark iptables -t nat -A PREROUTING -m mark --mark 1 -j DNAT --to-destination 172.16.0.1 iptables -t nat -A PREROUTING -m mark --mark 2 -j DNAT --to-destination 172.16.0.1 # What next? As I said, I'm not even sure it can be done. To give a bit of background, it's an old OpenVPN installation that cannot be upgraded (otherwise I'd install a recent version that supports multihoming natively). Thanks for any help.

    Read the article

  • 502 Bad Gateway error after failed requests using Passenger

    - by Nicolas Buduroi
    I've got a staging server running nginx 1.0.5 using Rails 3.1 under Passenger 3.0.9. The problem is that a request sent just after one where there's an application error return 502 Bad Gateway. To test it I've set up a simple controller with an action that just raise a dummy exception. One request will show the Rails error message and the next one will show nginx 502 Bad Gateway error, then it goes back to the Rails application error, etc. While investigating this problem I've found out that load testing the application (which increase the number of application processes) make that issue disapear. That is until the extra processes are shutdown, then it reappear. I've tried setting the passenger_min_instances option, but doing so doesn't change anything and in this case each time an application error happen one instance is killed while after load testing all instances are kept alive. P.S.: Some people on my team told me that they've seen the 502 error even when there's no application error but I've not been able to reproduce that. Update: Just found out how to display the responses status codes using ab and most of them are 502!

    Read the article

  • Natting trafic from a tunnel to internet

    - by mezgani
    I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

    Read the article

  • filter / directing URLs coming onto a network

    - by Jon
    Hi all, I an not sure if this is possible or not but what i would like to do is as follows: I have one IP address (dynamic using zoneedit.com to keep it upto date). I have one webserver running my main site which is an Ubuntu machine running Apache. I also have a windows 2008 server running another site. Just to confuse things I also run part of my Apache site on the windows server, currently using proxypassreverse to get the information from it. So it looks something like this: IP 1.2.3.4 maps to mydomain.com as well as myotherdomain.com All requests that come into port 80 are forwarded to the Apache box and I use Virtualhost settings to proxy the windows sites where needed. so mydomain.com is an Apache site mydomain.com/mywindowssection is the Apache server using proxypassreverse to get part of the site from the Windows server myotherdomain.com uses Apache and proxypassreverse to get the whole site. What I would like to be able to do is forward all http requests that come into my network to one machine that figures out who should be serving that content. so: mydomain.com would go to the Apache machine myotherdomain.com would go the windows machine. I am just in the process of setting up an Astaro gateway (never done this before so taking a while to configure) as my firewall, dns, dhcp etc, don't know if this can handle it. I have the capacity to run a VM on the network if a seperate box would be needed for this process as well. Thanks for any and all feedback. Jon

    Read the article

  • IIS 8 URL Redirect on site level

    - by jackncoke
    I am trying to do a simple 301 perm redirect to another url in IIS 8. The end results would be if i navigated to domain2.com i would end up on domain1.com. We are moving from IIS 6 to a new server and have aprox 600+ sites that will be configured on this IIS 8 box. All of these sites run a property CMS and are looking at the same directory for source code. In IIS 6 i would just go to the Home directory tab of each site and check the box that says "Permanent Redirect" and provide a URL. With IIS 8 there is "HTTP Redirect" and this looks like it would do the trick but it is being applied to all the sites in IIS 8. Not on the site level like it use to be in IIS 6. I also looked into URL Rewriting module for IIS 8 but it seems to take rules in the style of a firewall and i am not sure if i could effectly create rules that would cater to 600+ sites. I am looking for the easiest way to have redirects on my site level so that that customers with multiple domains can have there sites redirect to there main domain for seo purposes. I feel like this was so easily achieved in IIS 6 that i must be overlooking something in the new version.

    Read the article

  • How do I Install Intermediate Certificates (in AWS)?

    - by getmizanur
    I have installed private key (pem encoded) and public key certificate (pem encoded) on Amazon Load Balancer. However, when I check the SSL with site test tool, I get the following error: Error while checking the SSL Certificate!! Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found. Normally this indicates that not all intermediate certificates are installed on the server. I converted crt file to pem using these commands from this tutorial: openssl x509 -in input.crt -out input.der -outform DER openssl x509 -in input.der -inform DER -out output.pem -outform PEM During setup of Amazon Load Balancer, the only option I left out was certificate chain. (pem encoded) However, this was optional. Could this be cause of my issue? And if so; How do I create certificate chain? UPDATE If you make request to VeriSign they will give you a certificate chain. This chain includes public crt, intermediate crt and root crt. Make sure to remove the public crt from your certificate chain (which is the top most certificate) before adding it to your certification chain box of your Amazon Load Balancer. If you are making HTTPS requests from an Android app, then above instruction may not work for older Android OS such as 2.1 and 2.2. To make it work on older Android OS: go here click on "retail ssl" tab and then click on "secure site" "CA Bundle for Apache Server" copy and past these intermediate certs into certificate chain box. just incase if you have not found it here is the direct link. If you are using geo trust certificates then the solution is much the same for Android devices, however, you need to copy and paste their intermediate certs for Android.

    Read the article

  • I want to add a Quality Assurance domain. How do I handle DNS servers?

    - by Tim
    I'm advising a large client on how to isolate their dev and testing from their production. They already have one domain, lets say xyz.net with the active directory domain as "XYZ01". I want to add second domain say QAxyz.net and make its active directory domain "QA01" All development and QA servers would be moved to the QAxyz.net domain, the machines would be part of the QA01 domain. Note: Some of these servers will have the same name as the production servers for testing purposes. I believe we would have separate DNS servers for each domain. If I am logged into the QA01 domain, to access the production domain I would qualify my access like so: \PRODSERVER.xyz.net login: XYZ01\username Do I need to add a forwarder to my QAxyz.net DNS server so that it can see xyz.net? Would I need to do the same to the xyz.net DNS server to see QAxyz.net? I don't know how to advise them in this. Does anyone have any other recommendations to isolationg a QA domain? Many Thanks in advance! Tim

    Read the article

< Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >