Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 384/740 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

• Security of a free public VPN service

  - by Mark Belli

  I just started using VPNBOOK, which is a (very efficent) free VPN solution. I have a question: VPNBOOK user and pass used to connect to their vpn network are publicily available on their homepage; everybody uses them to connect to the vpn. Can a user intercept my wifi traffic and: Understand that my connections are directed to VPNBOOK servers. If point 1 is successful, then they could use VPNBOOK public user and pass to decrypt my traffic? I hope I am missing something, otherwise it would be a very big weakness and I would revert to a paid service (with a private account)

  Read the article

• Unable to connect to network

  - by user33750

  Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

  Read the article

• Will a 2.4Ghz WAP intefere with a 5.0Ghz WAP if placed directly next to each other

  - by Dan

  This is mostly a curiosity question to people who know more about radio and wi-fi than I. The 2.4Ghz band is massively overpopulated near my house to the point of sometimes getting 1000ms pings to the router from only a few feet away. inSSIDer finds at least 10 broadcasting SSID's within around 15 seconds of starting, so this isn't a real surprise to me! Sometimes I can get good results by changing the channel to something like 3 or 8, but it's usually temporary as the others use Auto Channel and hop around. Now, the router I have is capable of 5.0Ghz, as is the laptop I type this on. Switching to 5.0Ghz gives superb results: I can download at ~90Mbps and get consistent 1ms pings. The problem is that only this laptop supports 5.0Ghz! My question: Would I still get decent 5.0Ghz performance if I place a 2.4Ghz access point directly next to my router? And, indeed, will 2.4Ghz continue working as 'normal'? Testing would be an obvious step, but I threw all my superfluous equipment out in a recent house move. My understanding is that I should get good performance, certainly in comparison to having two devices using the same frequency range, but I do believe there will be some impact by the virtue of them being directly next to each other. (Cabling is not an option due to it being a rented house)

  Read the article

• How to serve media across home network?

  - by TK Kocheran

  I'm looking to share my media across my home network. Router fully supports running a DLNA server, but I don't know if it'd be better to run the server from my main server computer instead of from the router, as the router would have to operate off of a network share and my server can operate directly off of the files. Here's what I need to serve, in order of importance: ISO 1:1 DVD rips (4-8GB files), MP4/H.264 encoded videos, MKV videos, MP3 files, JPEG/CR2 images. Maybe I'm completely ludicrous for wanting to push full DVD files across my network, but in reality, I would assume that only the parts of the actual file needed (ie: menu, main video payload for main title) would be served at any one time. Plus, encoding takes time and precious disk space, so why not stream it 1:1 ;) Does anyone know of the best way to accomplish this? Main goal is to serve it to Logitech Revue downstairs and secondary goal is to serve it to other computers in the house. For music, I assume I could run a DAAP server, but I don't think that the Revue supports that (and I can't exactly throw together an app that does it just yet).

  Read the article

• Can't route specific subnet thru VPN in ubuntu

  - by Disco

  I'm having issues routing traffic thru VPN. Here's my setup I have 3 hosts, let's call them A, B and Z B and Z have a VPN connection in the 10.10.10.x SUBNET A and B have a direct connection in the 10.10.12.x SUBNET I want to be able to route traffic from A to Z, like : A <= 10.10.12.254 [LAN] 10.10.12.111 => B <= 10.10.10.152 [VPN] 10.10.10.10 => Z On host B, i have set up ip_forwarding : net.ipv4.ip_forward = 1 and routing on host B: [root@hostA: ~]# ip route 10.10.10.10 dev ppp0 proto kernel scope link src 10.10.10.152 10.10.12.0/24 dev eth1 proto kernel scope link src 10.10.12.111 10.10.10.0/24 dev ppp0 scope link 169.254.0.0/16 dev eth1 scope link routing on host A: [root@hostA: ~]# ip route 10.10.10.0 via 10.10.12.111 dev eth1 10.10.12.0/24 dev eth1 proto kernel scope link src 10.10.12.254 169.254.0.0/16 dev eth1 scope link default via 192.168.1.1 dev eth0 But still not able to ping 10.10.10.10 from host A. Any idea ? I'm pulling my hairs out.

  Read the article

• What does "incoming" and "outgoing" traffic mean?

  - by mgibsonbr

  I've seen many resources explaining how to set up a server's firewall to allow incoming and outgoing traffic on HTTP standard ports (80 and 443), but I can't figure out why I would need either of them. Do I need to unblock both for a "regular" web site to work? For file uploads to work? Are there situations where it would be advisable to unblock one and leave the other blocked? Sorry if that's a basic question, but I couldn't find it explained anywhere (also I'm not a native english speaker). I know in a "regular" web site the client is always the one who initiates a request, so I'm assuming a web server must accept incoming traffic on those ports, and my common sense tells me the server is allowed to send a response without unblocking anything else (otherwise it wouldn't make sense to have two types of rules). Is that correct? But what is an outgoing web (service) traffic, and what would be its use? AFAIK if the server wanted to initiate a connection with another machine, the specific port that matters is the one in the other end (i.e. the destination port would be 80), on its end any free port could be used (the source port would be random). I can open HTTP requests from my server (using wget for instance) without unblocking anything. So I'm assuming my concepts of "incoming" and "outgoing" are wrong somehow.

  Read the article

• Netgear router keeps disconnecting iPhone

  - by DisgruntledGoat

  My old router (Voyager 2091) packed up so I just got a new router - a Netgear N150 model DGN1000. My laptop connects OK wirelessly, but my iPhone 4S is constantly getting "disconnected" - it has perfect wifi signal and is seemingly connected to the router, but no pages load (it says "server cannot be found"). If I disconnect manually ("forget this network") then reconnect, it works fine again for a random amount of time (usually 10-30 minutes) then I get the same problem again. I've done some searching and this appears to be a known problem - there are dozens of forum posts out there lamenting similar connection problems. The only advice I have seen is to set a specific channel under Wireless Settings on the router CP, although every forum post recommends a different channel! 1, 3, 5, 6, 11... I have tried them all for hours at a time and get the exact same problem. The firmware is up to date. Is there an actual solution for this, or do I need to get a different router just to be able to use my iPhone?

  Read the article

• My network manager stop running very shotly when installed VirtualBox-4.0, reporting network manager not running

  - by wangolo joel

  I fell into a snare when i downloaded and install virtual box 4.0 on my ubuntu 10.4, when i started the virtualbox i tried i saw that my network icon on my desktop showed my red x showing iam disconnected and this happened shortily when i installed virtual box 4.0 I have searched through the web and found some people who have faced some problem. but the solution they gave them i tried but it coudn't work, of restarting,starting ,stoping the netowrk manager, i was even thinking of uninstalling this virutalbox but not netowrk connection truely i need your help

  Read the article

• Not getting IP from ISP on Multicast Network

  - by Johan Nielsen

  Im having an odd issue with my ISP (COMX.dk) I have a managed access gateway box (Telsay) with three 8P8C ports for use with Internet and Ip-Tv (respectively on different VLANS (so does my ISP tell me)) To utilize a port you will need to register your device's mac address through an online interface. You will then get your device paired with a static ip. I am using one port actively and I have registered another device (router). The router is configured to listen for an active dhcpd on the network. When my router get a lease I get a private ip 192.168.2.2 (not the one bound to my mac) which is odd! I unconnected my router from the gateway and connected my laptop directly. Same thing happened - I was given a private address. I did a port scan on the gateway and found port 80 to be open and browsed to the ip. I was then presented with a management interface of a Belkin wireless router (HMMM!!!!) <--by the way, not my gear At this point I called the ISP to let them know of my issue/findings - Only to be replied "Well, we cant see any rogue dhcp servers" (thinking to myself, well I can) I then decided that it could be fun to try the other port of my gateway, only to experience the same. So I reconnected my router and used the remaining port to make an observer(wireshark promic etc.) I am able to see my router trying to discover a dhcp server but I can also see my ISP's IGMP and PIMv2 packages just repeating the same pattern. Hello...Hello...Hello :) So I called them again, only to get the same response, "we dont see any rogue dhcp's...we cant see the host you are talking to (mac address of the Belkin router)...you are definitively connected through wireless?!?(no im not, no such thing as a wireless wire - i thought to myself)" My questions is, What is going on? (besides from what im reporting here) What am I seeing that the don't? What can I tell them in order for them to resolve mine/their issue?

  Read the article

• Percentage of computers on Internet behind a NAT?

  - by Mr.M

  I'm in a process of developing a server application and I would like to know if there are some numbers (or experience from people) on how many computers are behind the NAT on the Internet? Since my application is supposed to be a small server, being forced to implement UPNP support and TCP hole-punching with an external server may sway my determination, especially if more than 80% of the Internet is behind NAT.

  Read the article

• OpenVPN multiple servers on the same subnet, high availability

  - by andre

  Hey everyone. Let me start by saying that my Linux experience isn't super awesome but I can usually find my way around things easily. Over at work we have an OpenVPN setup that's been due for some improvement for a while now. The main server (tap mode) runs in our office, behind a rather slow DSL connection. The main problem is that, since I'm usually out of the office, every time I want to access something on the virtual network I have to go through that server to get anywhere else. We have two servers up on 100 Mbit connections that we use for development and production purposes, about 3 more servers in the office (one of them behind a different T1 line for VOIP) and about two dozen clients who use the network on a daily basis from various locations. We've had situations where network routing (outside of our control) would not allow people to reach our main OpenVPN server whilst the other locations were connectable. Also any time someone outside the office wants to fetch something from any of the servers (say, a 500 MB code repository), a whopping 20 KB/s download speed is just unacceptable these days (did I mention slow DSL? ok). We had to implement traffic shaping on this server since maxing out this connection was fairly trivial. I had the thought of running two (or more) OpenVPN servers in the network. These would have to have the same subnet though, as our application relies on virtual network's IP addresses for some of its core functionality. The clients would also preferably retain the same IP addresses but that's not vital. For simplicity, lets call the current server office and the second server I'm setting up, cloud. Call the server on the T1 phone. This proved to be rather complex because as soon as I connect to cloud, I cannot see office. Any routes to a server that would go through office also do not work while I'm connected to cloud (no ping, nothing) and vice-versa. There's no rules for iptables that would be blocking the traffic either. Recently I came across this article on linuxjournal but the solution they provide seems to only cover the use of two servers and somewhat outdated (can't even find much documentation, their wiki is offline). They also state that adding more servers would be a complex task. Ideally I would like to keep the existing server office running the virtual network and also run the OpenVPN daemon on the cloud and phone servers (100 Mbit and very reliable connection, respectively) so that we're on safe ground in case of a hardware failure, DSL failure, etc. So, in essence, I'm looking for a highly available OpenVPN solution (fix, patch, hack, tweak, whatever you want to call it) that will accept connections on multiple hosts (2 or more) whilst keeping the same IP address subnet regardless of the server to which you connect to. Thanks for reading and sorry for the long post, I hope it gets the point across :P

  Read the article

• Dnsmasq offering IP via DHCP, but nobody is accepting

  - by Matt

  As clients connect the logs light up with DHCPDISCOVER(wlan0) and DHCPOFFER(wlan0) but the IPs being offered are not being accepted. Currently dnsmasq offers IPs on eth1 which works flawlessly. It seems to be just wlan0 that poses this problem for me today. ifconfig of wlan0: wlan0 Link encap:Ethernet HWaddr aa:aa:aa:aa:aa:aa inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::baa3:86ff:fe70:796a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1609 errors:0 dropped:0 overruns:0 frame:0 TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308739 (301.5 KiB) TX bytes:319185 (311.7 KiB)

  Read the article

• Keep source IP after NAT

  - by John Miller

  Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

  Read the article

• Can not access network computers anymore

  - by Johny Skovdal

  Last Thursday (03/05/12) I got a new computer to be able to work from home. I plugged it, by cable, into the company network and installed most of the software needed for me to do so, by accessing a share on my stationary computer at work. I had no issues here what so ever, and everything just worked. Yesterday evening I tried accessing the company network trough Windows VPN, and while I was able to connect to the network, I was unable to connect to any computers on the network. I did, however, get an error when connecting, but I can't seem to get the error again, to get the details of the error message. Today I am sitting on the company network again, and now I can not access anything on the network like I could last Thursday, though I can ping all the computers I am attempting to access. Here is a list of details that might help in troubleshooting this issue (updated): List of observations / actions My computer is identical to another computer that has no issues. It is not on the domain but rather on the default workgroup, but this was not an issue last Thursday, so I am assuming it still is not. I am able to access my e-mail on the exchange server. I can connect to our TFS server from Visual Studio but not from Explorer. I can also connect to Database Servers and Remote Desktop. I can see several computers when browsing network computers, but I am unable to connect to any of them. When trying to connect to a computer I am consistently met with the error code "0x80070035" (network path not found). I also get the 0x80070035 error when double clicking the target computer from the Network UI. I am not met with a login dialog when trying to access a computer, as I should, since I am not on the domain. (I did login to both Exchange, Remote Desktop and TFS though) Between Thursday where it worked and Sunday evening where it did not, I have installed quite a few security updates, plus various tools etc. that I need for programming. I have tried accessing by computer name and ip and neither of them work. I can ping by computer name. I have deleted all (1 entry) stored network credentials. I am able to access my computer from the target computer. Client and Server can see each other on the network = Network Discovery is enabled. I am using the network profile "Work". When accessing the network through VPN, I am unable to get anything to work using computernames, but all of the above applies when using IP adresses instead of computername. I run Windows 7 Home Premium on my computer. Using powershell attempting to access a share I get the following error (ComputerName and ShareName being correct values of course): PS C:\Users\MyUser> cd \\ComputerName\ShareName Set-Location : Cannot find path '\\ComputerName\ShareName' because it does not exist. At line:1 char:3 + cd <<<< \\ComputerName\ShareName + CategoryInfo : ObjectNotFound: (\\ComputerName\ShareName:String) [Set-Location], ItemNotFoundException + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SetLocationCommand However, ping'ing the same machine (ping ComputerName) from powershell I get response immediately. (As mentioned in the list of observations/actions, I tried the above with the IP address again on VPN, to get the same result) Conclusion So to sum up, pretty much the only thing I can not do, is access the other computers through browsing (explorer.exe, powershell, map networkdrive, etc.), which means that I am pretty much down to, that it is unable to resolve the path somehow, when trying to connect to other computers trough browsing, though the path gets resolved perfectly using all kinds of other services. Any recommendations as to what I can try next to resolve the issue? :)

  Read the article

• Outlook locking network connection/session?

  - by HaydnWVN

  Scenario: We have an 'automatic orders' machine sat in the corner running XP with Outlook 2003. Its job is to check for new emails on a specific account, when it encounters one it checks the e-mail body for specific wording to determine which customer it is from (using a macro), then it checks the attachment for specific order codes before parsing the attachment to create a .csv file (which is then e-mailed onto one of the sales team) before importing the .csv into our bespoke ERP/Sales Order system to create an order. Problem: Periodically the machine will have symptoms of a lost network connection (unable to connect to any network source). Sometimes after several days, sometimes over a week. Volume of emails/orders processed does not seem to be linked. Additional info: The machines .pst is stored on a mapped network location. The .csv created is stored on a mapped network location. This is a workgroup, not a domain. All network drives are Samba shares from an Ubuntu fileserver. Our bespoke system runs from a database (MySQL) Ubuntu server. Our troubleshooting so far: I have switched machines (previous was Win2000) with the same symptoms. Restarting the machine FIXES the problem. Closing Outlook and then end tasking an Outlook.exe background process FIXES the problem. If you close Outlook, without end taking the background process, outlook will not reopen (saying it cannot find the pst file & it will not open any network location). Does Outlook have some kind of 'max session' linking it to network activity that is not closing after a mail request? Could Auto-archive be causing this? Is there a tool to check/display what each outlook.exe process is doing? Have not found many ways to troubleshoot this yet, as it is so infrequent...

  Read the article

• Can I build a VPN on top of Tor?

  - by Thilo

  If I understand correctly, the Tor client works as a combination of a proxy server and application plugins (such as the Firefox Torbutton) that enable use of the proxy and contain additional application-specific privacy features (such as suppressing cookies, sandboxing JavaScript, turning off Flash). That works very well with applications that support it (such as Firefox). But is there a way to establish a VPN over Tor, so that my whole Wifi network can be protected, including applications that do not support proxy configuration and devices like iPod touches?

  Read the article

• hosts file for ip address

  - by Jon Clegg

  I would like to map ip address to specific localhost interfaces (e.g. 23.45.66.77 = 127.0.3.3). For named hosts I can use the hosts file. Naturally this doesn't work for IP address. This has to work in windows, the only option I've found so far is implementing a TAP/TUN driver like openvpn does. Are there any other options?

  Read the article

• TC hashing filters - single rule deletion

  - by exa

  For traffic shaping I'm currently using a setup that looks exactly like the setup from LARTC, on this page: http://lartc.org/howto/lartc.adv-filter.hashing.html I have a simple problem with that - everytime I want to modify something in the hash table (like assign a IP to different flowid), I need to delete the whole filter table and add it again filter by filter. (I actually don't do it by hand, I have a nice program that does it for me... but still...) There is a problem - I got roughly 10k filters allocated this way and deleting and refilling the whole filtertable can get pretty lengthy, which is not exactly good for traffic shaping. My program could easily manage to delete only the rules that need to be deleted (thus reducing the whole problem to several commands and miliseconds), but I simply don't know the command that deletes only the one hashing rule. My tc filter show: filter parent 1: protocol ip pref 1 u32 filter parent 1: protocol ip pref 1 u32 fh 2: ht divisor 256 filter parent 1: protocol ip pref 1 u32 fh 2:a:800 order 2048 key ht 2 bkt a flowid 1:101 match 0a0a0a0a/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 2:c:800 order 2048 key ht 2 bkt c flowid 1:102 match 0a0a0a0c/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 link 2: match 00000000/00000000 at 16 hash mask 000000ff at 16 The wish: 'tc filter del ...' command that removes only one specific filter (for example the 0a0a0a0a IP match (IP address 10.10.10.10)). Removal of some small subgroup would also be good - for example I could still recreate a bucket (bkt a) pretty fast. My attempts: I tried to number all the filters using prio, but with no help -- they just create something unusuable (but deletable) below, but the bucketed filters remain there after that gets deleted. Any ideas? edit - I'm adding a simplified tl;dr description of the problem: I created hash filter on some interfce just like in this http://lartc.org/howto/lartc.adv-filter.hashing.html I want to find a command that deletes one rule (e.g. 1.2.1.123) from the table, leaving the rest untouched and working.

  Read the article

• What is the most common default computer name (sys properties)

  - by John

  What is the most common default computer name for Windows (Home, Pro, Vista, and 7)? (Or a list of the most common.) I tried Google, and read that Redhat linux defaults to "localhost," and Toshiba laptops (Windows) default to Toshiba, and some Dells default to DELL+some model number.

  Read the article

• server dosnt produce syn-ack

  - by steve

  I have a small program that take packets from the nfqueue . change the ip.dst to my server dst (and ttl), recalc checksum and return the packet to the nfqueue. The server and the client are linux and apache web server is run on the server and listen on port 80. i open telnet in the client to fake ip on port 80 . the packet is changed by my program and sent to the server, but the target server (the new dst ip) get the syn , but dosnt generate syn-ack (the server also belong to me , so i can see that it get the syn with checksum correct , but dosnt generate syn-ack). if i do the same , but with the real server ip as the dest, the tcp handshake is done correct (in this case i just change the ttl and checksum. The change that i did to the ttl is just a test to see that my checksum calc is ok). i compare the sys's , but didnt find and difference. Any idea? Ps. i saw this topic : Server not sending a SYN/ACK packet in response to a SYN packet and i set all flags the same , but this didnt help. Thank you

  Read the article

• How do I set or remove a Windows SMB password?

  - by David Is Not Here

  I recently purchased a computer with the intention of using it as network-attached storage. It presently has no Windows password and only one account. Can I create two different shares (share two different folders) in different ways -- make one publicly accessible, and make another only visible to people with a certain username/password combination? Creating multiple users isn't a problem, I just can't figure out where to start within Windows.

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• stunnel: SSL-to-SSL? (for smtp/imap)

  - by nonot1

  Hello, How can I configure stunnel to accpet SSL connections, and connect then to an SSL port on a different server? Here is my setup: Our ISP's server, "Mail Server", supports smtp/imap over SSL. (Not starttls. Just over ssl.) But, I have a bunch of client machines that will only trust a specific, internal, root certificate. Thus, they can not connect to "Mail Server". For these client machines, I'd like to make a dedicated "Mail Tunnel" host that uses stunnel to listen with an in-house signed SSL certificate, and just forward data to "Mail Server" using a 2nd SSL connection. Can this be done? What would be the specific steps for Ubuntu Server 10.10? (I'm not too familiar with persistent service configuration.) Thank you

  Read the article

• Howto monitor traffic between IIS and MSSQL

  - by kockiren

  Hello @all, i try to check how much traffic flows between MSSQL Server and IIS Server in different Locations. There are 1 ipcop in every Location and i download the tcpdump file from one Firewall and search for DST=ipmssql and SRC=ipIIS but i did not find the ip from the Database Server. But there are traffic between both. Any suggestions why i did not find the IP Adress from the MSSQL Server? Is this an configuration failure in IPCop or is the Traffic between ISS and MSSQL so strange :-) Regards Rene

  Read the article

• Mangling traffic from a Mikrotik Router

  - by TiernanO

  I have a MikroTik powered Router in the house with a couple of internet connections (2 200/10Mb Cable modems and a 100/20Mb VDSL Line). I am using Mangle rules to set routing marks and NAT rules to do some load balancing, and everything seems to be going grand... But it only works for traffic from outside the router... Let me explain: I have 4 GigE ports on the machine, WAN1,2 and 3, and a LAN port named LAN1. All traffic from LAN1 is getting mangled (as it should be) but traffic from the load router itself (proxy traffic, IPv6 tunnels, VPN connections) are not being mangled. They get the first route to 0.0.0.0/0, which in my case is WAN2, and stick with it. So, how do I get traffic from the local router to be mangled? Originally it was proxy traffic that caused the problem, but now with IPv6 and VPN, they are more important to be mangled... last time i enabled IPv6 traffic, all traffic only went though WAN2, and the rest where unused... Any ideas?

  Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >