Search Results

Search found 3025 results on 121 pages for 'amazon ec2'.

Page 4/121 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to secure a group of Amazon EC2 instances

  - by ks78

  I have several Amazon EC2 instances running Ubuntu 10.04 and I've recently started using Amazon's Route 53 as my DNS. The purpose of doing that was to allow the instances to refer to each other by name rather than private IP (which can change). I've pointed my domain name (via GoDaddy) to Amazon's name servers, allowing me to access my EC2 webservers. However, I noticed I can now access the EC2 instances which I don't want to be public, such as the dedicated MySQL Server. I was thinking Amazon's Security Groups would still be in effect when using Route 53, but that doesn't seem to be the case. Before I started using Route 53, I was thinking of having one instance run a reverse proxy, which would help protect the web servers behind it. Then IP-restrict all the other instances. I know IP restricting can be done using the firewall within each instance, but should I ever need to access them from another IP address, I'd need a way in. Amazon's control panel made it a breeze to open a port when necessary. Does anyone have any suggestions for keeping EC2 instances secure, but also accessible to their administrator? Also, what's the best topology for a group of EC2 instances, consisting of web servers and a dedicated database server, from a security perspective? Does having a reverse proxy server even make sense?

  Read the article

• How do I set up DNS with nic.io to point to an AWS EC2 server?

  - by Chad Johnson

  I purchased a domain one week ago via nic.io. I have elected to provide my own DNS [because they provided no other option]. I'm trying to point my .io domain at my EC2 server instance. I've allocated an elastic IP and associated it with the instance. I can SSH into the instance and access point 80 via the IP address just fine. The IP is 54.235.201.241. nic.io support said the following: "You have selected to provide your own DNS and therefore if there is an issue with the set-up of the name servers you will need to contact your DNS provider." So, I created a Hosted Zone via Route 53 in AWS. This created NS and SOA records. I then set the Primary and Secondary servers at nic.io's domain admin page to the SOA record domains. Additionally, I set the optional servers to the NS domains. I did this two days ago, and I can't access the server via the domain. I ran a DNS check here...still not sure what I need to do: http://mydnscheck.com/?domain=chadjohnson.io&ns1=&ns2=&ns3=&ns4=&ns5=&ns6=. I have no idea what I'm supposed to do. Does anyone have any ideas?

  Read the article

• Amazon EC2 instance was not available for few minutes (amazon showed that everything ok)

  - by Salvador Dali

  Few minutes ago my amazon Ec2 instance was unavailable for a few minutes. During this time neither I was able to connect to web-site with http, nor I was able to ssh to it. Also I was not able to connect to my amazon management console for some time (less than amount of unavailability of my instance). When I was able to connect to management console, it was showing me that everything is running smoothly (but I still was not able to connect to instance in any way for a minute or two). During this time I have checked their status page just to see that there is no issues (my instance is in Ireland and there is nothing wrong there today). After that I was able to log in. I checked my logins with last to see that no one except me was logging in. I also looked in apache logs and there was no errors or warnings during this time. Right now when I see my amazon monitor, I see a small spike in CPU in last 15 minutes (but this is from 10% to like 20%) I have no idea what can it be (I have never experienced anything like this before) and therefore I have no idea how scared should I be or what else should I look for. Can anyone give me a hint what my actions should be in such situation?

  Read the article

• Indefinite hang when restoring SQL 2005 database on a SQL 2008 server in EC2

  - by erinloy

  I'm trying to restore a 25 GB database backup taken from a Windows 2003/SQL 2005 machine to a Windows 2008/SQL 2008 machine in the Amazon EC2 cloud, using a .bak file and the SQL Management Studio. SQL Management Studio reports the restore reaches 100% complete, and then just hangs indefinitely (24+ hours) using a lot of CPU, until I restart the SQL Server service. Upon restart, SQL again uses a lot of CPU activity for what seems to be an indefinite amount of time, but the DB never comes online. Here are some details: - I have created two EBS volumes, one for DATA and one for LOGS, and I have set the default directories in SQL Server to the \DATA and \LOG directory on these respective volumes. (I wonder if the issue could be related to this, but the DB is too big to restore on the root drive.) - I have given the SQL Server user group full access to these directories. - The server can create a new empty test DB in these directories just fine, and can backup and restore the test DB. - I have tried both restoring of a .bak file and attaching directly to copies of the original .mdf/.ldf files, and the result is the same in both cases. - Both the .bak restore and the .mdf/.ldf attach occur from/to the EBS volumes. - I've also tried the above via SQL script, and "WITH RECOVERY", with no difference in the result, just less UI. - The backup contains two full text indexes. - I have to use "WITH MOVE" for most of the files in the backup. - There's nothing wrong with the backup or .mdf/.ldf files, as this works just fine on a Windows 2003/SQL 2005 machine in the Amazon EC2, but not Windows 2008/SQL 2008. - The DB is NOT marked as "Restoring" in the SQL Management Studio - it is just listed as a normal database, but throws errors when I try to do anything with it (expand the object browser tree, view properties, etc.) Any ideas?

  Read the article

• Options for EC2 ec2-create-snapshot and family

  - by shabda

  I am trying to use the various tools provided by ec2-ami-tools Eg, ec2-create-snapshot -h .... -K, --private-key KEY Specify KEY as the private key to use. Defaults to the value of the EC2_PRIVATE_KEY environment variable (if set). Overrides the default. -C, --cert CERT Specify CERT as the X509 certificate to use. Defaults to the value of the EC2_CERT environment variable (if set). Overrides the default. -K and -C are two required values, and I cant understand what values are these expecting? If I create a Keypair from Elasticfox, I get only one file to download and a fingerprint. So which of this need to get where?

  Read the article

• Amazon Web Services : Fault tolerant solution

  - by Algorist

  Hi, I am using Boto library to write scripts for automating our jobs on AWS. My script actually starts a hadoop cluster using cloudera scripts and then does some customization. I am having a problem with retries. Seems like very command in my script fails once couple of days. I started adding retry to all the commands, but then the code is very clumsy and difficult to maintain. what do people do in general. Thank you Bala

  Read the article

• (Newbie) Amazon Web Services Apache Server

  - by Samnsparky

  Hello! I am trying to get a feel for the costs imposed by running apache on AWS continually. Assuming that the service is scarcely used, does anyone know how many cpu hours that would eat up in a month just by sitting there and running? I understand that this is slightly impractical but I am trying to figure out what the cost of entry is to deploy an application on this platform (as compared to GAE). I suspect it to be small but I would like to know. Thank you for your help, Sam

  Read the article

• Amazon Web Services Apache Server

  - by Samnsparky

  I am trying to get a feel for the costs imposed by running apache on AWS continually. Assuming that the service is scarcely used, does anyone know how many cpu hours that would eat up in a month just by sitting there and running? I understand that this is slightly impractical but I am trying to figure out what the cost of entry is to deploy an application on this platform (as compared to GAE). I suspect it to be small but I would like to know.

  Read the article

• Amazon AWS S3 to Force Download Mp3 File instead of Stream It

  - by Calua

  Hi everybody, I'm using Amazon AWS S3 to put the mp3 file then allow our site visitor to download the mp3 from Amazon AWS. I use S3Fox to manage the file, everything seems working fine until recently we got many complaints from visitor that the mp3 was streamed via the browser instead of displaying browser save dialog. I try for some mp3 and notice that for some mp3, the save dialog box is appear, and for some others they're streamed via browser. What can I do to force that the Mp3 file will be downloaded instead of streamed via web browser.... Any help would be much appreciated. Thanks

  Read the article

• Amazon EC2 spot instances - is there a catch ?

  - by gareth_bowles

  I needed to start a new EC2 instance today and decided to try out the new spot instances, where you can reduce your instance cost by bidding on the maximum per-hour price you're prepared to pay. Since today's spot price was only 35c / hour, compared with 85c / hour for an on-demand instance, I was wondering: if I just bid a really high price, say $1 / hour, can I effectively be sure of getting a much cheaper long-running instance than an on-demand instance (since the spot instances are only charged by the current spot price) ? I suppose it's theoretically possible for the spot price to go over the on-demand price, but as far as I can tell from the data on the AWS site, the spot price has always been well below that.

  Read the article

• Amazon EC2 spot instances - is there a catch ?

  - by gareth_bowles

  I needed to start a new EC2 instance today and decided to try out the new spot instances, where you can reduce your instance cost by bidding on the maximum per-hour price you're prepared to pay. Since today's spot price was only 3.5c / hour, compared with 8.5c / hour for an on-demand instance, I was wondering: if I just bid a really high price, say 10c / hour, can I effectively be sure of getting a much cheaper long-running instance than an on-demand instance (since the spot instances are only charged by the current spot price) ? I suppose it's theoretically possible for the spot price to go over the on-demand price, but as far as I can tell from the data on the AWS site, the spot price has always been well below that.

  Read the article

• Linux & Windows Boot Up Times in Amazon Web Service and Windows Azure

  - by Adron

  I've been working with Windows Azure and Amazon Web Services EC2 for a good many months now (almost getting to the years range) and I've seen something over and over that seems troubling. With AWS & Linux I commonly get instance startup times with EC2 around the 1-3 minute range. With AWS & Windows OS on an EC2 instance it often takes 10-20 minutes. With Windows Azure Web or Service Role I often get anywhere from 6-30 minutes waiting for a role to startup. I assume of course this involves booting up a windows instance somewhere in the fabric. I know there has always been tons of FUD about windows vs. Linux, but I'd really like to know why it is that Windows 08 or 03 boots so much slower in the cloud than Linux. Any specific technical information regarding this would be greatly appreciated! Thanks.

  Read the article

• Decreasing Root Disk Size of an "EBS Boot" AMI on EC2

  - by darkAsPitch

  So I have followed Eric's wonderful article here: http://alestic.com/2009/12/ec2-ebs-boot-resize This was the code basically that helped me increase the default size of the AMI: ec2-run-sintances ami-ID -n 1 --key keypair.pem --block-device-mapping "/dev/sda1=:250" Running Ubuntu 11.10 I didn't even have to re-size the disk afterwards, it was immediately a 250GB drive. How do I go about decreasing the default size of the AMI??? I tried: ec2-run-sintances ami-ID -n 1 --key keypair.pem --block-device-mapping "/dev/sda1=:100" Obviously... but I was told: Client.InvalidBlockDeviceMapping: Volume of size 100GB is smaller than snapshot ####### <250

  Read the article

• Connect to MySQL EC2 Instance outside of VPC

  - by Brian W

  I have a VPC setup with a few EC2 instances inside. I'm attempting to connect to a MySQL database on an EC2 instance outside the VPC, with no luck. I have the security groups on the VPC EC2 instances set to outbound 0.0.0.0/0 which I assumed would let it connect to any outbound connection. I also followed a tutorial on creating a NAT, but wasn't exactly sure how to use it to connect to an external database. In any case, if anyone has experience and knows the proper way to connect to a database outside the VPC, it would be greatly appreciated!

  Read the article

• Storing bundled AMI:s at Amazon EC2

  - by Industrial

  Hi everybody, I am totally new on configuring servers and working with EC2, so please bare with me. I managed after a lot of hair pulling to get a server with Ubuntu up and running with memcached and some other goodies that would make a great package for me. I thought that however, when storing it as an AMI with this tool I would be able to have memcached available next time I launched an instance based upon that image. What can I do to make sure that my configuration is saved properly to an instance? Question number two: - Can I someway make a command that is automatically run on server creation, like initiating memcache with "memcache -d -m 1700 -u root" or even a batch of them?

  Read the article

• bottle.py on EC2 micro instance causes 2 order of magnitude slowdown

  - by user61633

  Cross-posted from StackOverflow: I wrote a little toy script to solve this type of game, and put it on my new micro EC2 instance. It works perfectly, but while it takes around 0.5 seconds to run a local version, and takes under 0.5 seconds to run both the local and the bottle.py version on my home computer, running the bottle.py version on the EC2 instance takes over 2 minutes. Python has the cpu pegged at 99% the entire time. Only 7.4% memory usage, consistently, and no swapping. The only guess I have is initialization time for bottle.py on EC2, but if it were that, why would it be ~200x faster on my own computer with bottle.py?

  Read the article

• Getting ID of an instance newly launched with ec2-api-tools

  - by Jonik

  I'm launching an EC2 instance, by invoking ec2-run-instances from simple a bash script, and want to perform further operations on that instance (e.g. associate elastic IP), for which I need the instance id. The command is something like ec2-run-instances ami-dd8ea5a9 -K pk.pem -C cert.pem --region eu-west-1 -t c1.medium -n 1, and its output: RESERVATION r-b6ea58c1 696664755663 default INSTANCE i-945af9e3 ami-dd8ea5b9 pending 0 c1.medium 2010-04-15T10:47:56+0000 eu-west-1a aki-b02a01c4 ari-39c2e94d In this example, i-945af9e3 is the id I'm after. So, I'd need a simple way to parse the id from what the command returns - how would you go about doing it? My AWK is a little rusty... Feel free to use any tool available on a typical Linux box. (If there's a way to get it directly using EC2-API-tools, all the better. But afaik there's no EC2 command to e.g. return the id of the most recently launched instance.)

  Read the article

• Easy GUI way to auto scale EC2 and RDS: aws console, scalr, ylastic...?

  - by Zillo

  I am managing all my instances with the AWS Management Console (the GUI web console) but now I want to use Auto Scale and it seems that this can not be done with that console. Yes, there is CloudWatch but I can only create alarms (e-mail notifications), it seems that CouldWatch needs you to add the auto scale policy in some other place (by command line console?). I would like to use some easy GUI interface. Ylastic and Scalr seems to be a good option. Which one do you think is better? Regarding Scalr, is there any difference between the open source software Scalr and the service Scalr.net? I mean, is the GUI interface the same? I like the idea of the Scalr because I do not need to give my Secret Access Key to a third party (like in Ylastic or in Scalr.net) One question about the Scalr software, it has to be installed in the instances or it must be installed in another machine? Do I need to setup again all my security permissions, AMIs, snapshots, etc. or I can use AWS Management Console for everything and Scalr just to auto scale.

  Read the article

• Understanding where an amazon ec2 instance run?

  - by kenzo450D

  I am currently using the aws api from my local desktop. I can successfully take backups of my amazon volumes, and even create an ami from it. Now when i wanted to run the instance to be built from this ami, where does the instance run? In their Elastic Cloud or the computer from which the command was issued. Suppose I want to create the new instance in a new region? (locations as defined in ec2-describe-regions) How would I do that? It seems i have a bad knowledge about how the relation between amazon volumes and instances? Please explain it. I am only allowed to use the CLI tools to do all of my work. I made a new snapshot of the existing instance, made an ami using ec2-register, made a keypair, and then followed these steps, http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/launching-an-instance.html#launching-an-instance-cli but i got an error as this Client.InvalidParameterValue: The requested instance type's architecture (i386) does not match the architecture in the manifest for aki-fc37bacc (x86_64) my local computer is 32bit. But I do not want to load instance on the local computer but on amazon servers?

  Read the article

• Ubuntu 12.04 on Amazon EC2: /dev/xvda1 will be checked for errors at next reboot?

  - by cwd

  I'm running the lastest Ubuntu 12.04 AMI (ami-a29943cb) from Canonical on Amazon EC2 and quite often when I log in I get the message: *** /dev/xvda1 will be checked for errors at next reboot *** I have read a bunch of documentation on this and seem to understand that every so many reboots (around 37 see Mount count / Maximum mount count below) Ubuntu wants to check a disk for errors. I can see that by using dumpe2fs -h /dev/xvda1 (reference) to get information such as: Last mounted on: / Filesystem UUID: 1ad27d06-4ecf-493d-bb19-4710c3caf924 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 524288 Block count: 2097152 Reserved block count: 104857 Free blocks: 1778055 Free inodes: 482659 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 511 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Tue Apr 24 03:07:48 2012 Last mount time: Thu Nov 8 03:17:58 2012 Last write time: Tue Apr 24 03:08:52 2012 Mount count: 3 Maximum mount count: 37 Last checked: Tue Apr 24 03:07:48 2012 Check interval: 15552000 (6 months) Next check after: Sun Oct 21 03:07:48 2012 Lifetime writes: 2454 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 0a25e04c-6169-4d68-bfa6-a1acd8e39632 Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x0000158b Journal start: 1 I've tried these things to get rid of the message and usually the badblocks is what does it for me: Run this command and reboot: sudo touch /forcefsck Run badblocks to check the disk: badblocks /dev/sda1 Edit /etc/fstab and change the last "0" which is the fs_passno column accordingly and then reboot: The root filesystem should be specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. I don't understand: If this is a virtual drive shouldn't it be less prone to errors? Was the image created with one of the flags set? If not what is triggering it? Why is fs_passno set to 0 on Amazon EC2 Ubuntu images? This is not the first one that is like this.

  Read the article

• rsync to EC2 using ssh -i

  - by isomorphismes

  I'm able to ssh -i mykey.pem to EC2. I'm able to scp -i mykey.pem to EC2. But when I try to rsync -avz -e "ssh -i mykey.pem" I get this error: Warning: Identity file mykey.pem not accessible: No such file or directory. Permission denied (publickey). rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(605) [sender=3.0.9] Any suggestions what I've done wrong?

  Read the article

• Mounting an Amazon EC2 instance on MAC OS X

  - by hinghoo

  What are some methods for transferring files to and from Amazon EC2 instances. I'm looking for solutions / tools for editing files as well as copying files to EC2 instances from both Mac and Windows. For example, what are some solutions for mounting a drive from an instance locally? Generally, what other methods are out there?

  Read the article

• Amazon EC2, fastest way to get a node into an existing cluster

  - by imaginative

  I'm new to Amazon AWS. A lot of the time I hear about people folks spawning instances and almost instantly putting them behind a load balancer and into an existing cluster. In the traditional world of managed machines, this would include provisioning hardware, installing an OS, configuring the network on the machine and once the network is available, use a tool of your choice such as CFengine, Puppet or Chef to bootstrap the machine based on its class. It seems like there are "shortcuts" that are able to get a server of a particular class up and running in Amazon EC2. If I have a particular stack running on my server, such as erlang, tomcat6 etc.. what's the fastest way to get these up and running and hooked into Amazon's load balancer? From network, to software stack to kernel tuning? Is it a combination of creating an AMI then running a tool like Puppet against the new instance? Any idea

  Read the article

• Encrypt EC2 API call

  - by Frank

  I have to host an AMI in the Amazon Marketplace. i need to get the type of instance, whenever some user launches the AMI., like if its small medium or large. based on that i need to make some changes in the AMI when its created. I can do this with Amazon API call, to get the instance type, but the problem is that the instances created with the AMI will be started by other users, and i cannot use my AWS Credentials in the Amazon API. Is there any way that i can create an anonymous readonly user to make only specific type of EC2 API Calls? Or can i encrypt my EC2 API credentials, so no one can use it?

  Read the article

• Autoscaling EC2 with NFS mounts

  - by Jamie Taylor

  I'm trying to set up a shared filesystem on EC2 and I've read tutorials such as this: http://blog.ronaldmccollam.com/2012/07/configuring-nfs-on-ubuntu-in-amazon-ec2.html In step 2 it talks about configuring the exports, for this I need an IP range but when I'm auto-scaling I can't predict what the IP will be before it scales. Is there any other way of doing this while still staying secure? Thanks Edit: Just tried s3fs, didn't seem to work properly

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >