Search Results

Search found 33677 results on 1348 pages for 'access levels'.

Page 415/1348 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

  • How to set up a PC which can be booted from Linux AND Windows?

    - by Martin
    Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

    Read the article

  • Slow website load with CNAME, fast when using IP

    - by Nate Strandberg
    I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

    Read the article

  • ffmpeg volume parameter format

    - by tanon
    ffmpeg's -vol parameter is confusing me. 256 => normal (i guess meaning same as input volume, no change) 512 => (double the volume - read this somewhere). So what to do for 3 times the volume? 1.5 times the volume? Basically, lets say I have the max sound amplitudes (audacity levels) in 3 files as: 0.8 0.6 0.9 I want to amplify in the first two files, so that max=0.9 in all files. What parameters of -vol I would use?

    Read the article

  • Is it possible to change error messages for users connecting to network printers?

    - by eric.s
    We are cleaning up our print server (Win XP). To test that printers are no longer really there we have set up some tests. These tests have left us with 176 questionable printers. We have now set Print access to Everyone to Deny. Testing shows this gives the user a 5 Access is denied. message. We would like to change this message for the user, so when they call our workstudy's who answer the phone do not interpret this as a computer rights management issue and can route the call properly. Is it possible? Is this error number system wide, or just for printing errors? If it's not a system wide error where might the string for this error be?

    Read the article

  • What's the easiest way to allow Exchange 2003 remote (no MSO client) users check their Mailbox size?

    - by Myrddin Emrys
    We are migrating from Exchange 2003 with no quota settings to Exchange 2010 with limited mailbox sizes. We are trying to get users to clean their mailboxes prior to the move to reduce the transfer load, as well as to comply with new quotas on the 2010 system. But many users access their mail through webmail only. I cannot see a way for users to access their mail store size in this manner. Has anyone else run into this problem? Is there a good way to easily let users check their own mailbox size? The only thing I've come up with as a workaround is a report that IT generates and mail-merge it out to users daily with their current mailbox size. This is cumbersome and time consuming compared to a way for them to check their own mailbox size however.

    Read the article

  • restrict windows remote desktop

    - by radioactive21
    Is there any way to prevent users from launching and using remote desktop and to restrict it to only local admins or domain admins? The reason being is that we do not want users to remote desktop home, but at the same time we want it to be available to certain users like administrators or power users. Ideally there is a group policy that can be set to groups or users who have access to the remote desktop application from their machine. Clarifications: I need the machine to be able to still have remote desktop work, just only with a specific user or group. The point is that we allow certain users to use remote desktop and others to not have access to it. There are machines where there are multiple users, so we cant just block a whole machine or by IP. This needs to be done per a user account or login.

    Read the article

  • How do I make a partition usable in windows 7 after power loss?

    - by user1306322
    A few days ago I was installing some software and power went down. When I rebooted, the partition to which the software was installed was not accessible. Disk manager shows that it's there, but doesn't show type, if it's healthy and gives me an error when trying to read its properties. The problem seems to be common after power loss, people recommend solving it by assigning a letter to the partition via DiskPart utility, but partition isn't listed in my case. I can access that partition with bootable OSs (like bootable Ubuntu or winXP) and all the files are there, but another installation of Windows 7 gives me the same results as the original. I could just copy all data to another disk if there was enough space, but unfortunately the size of partition I'm having problems with is 1.1TB. How do I regain access to the partition in my original Windows 7 installation without losing any data?

    Read the article

  • How to get full write permission on my second drive after dual boot?

    - by Shaul
    I had a WinXP installation on my hard drive. Then I bought a 2nd drive and installed Win7. Dual boot working fine. But when I'm in the Win7 environment, it appears that I don't have full admin permission on the "D" drive (that's the drive with WinXP). Even though the user I'm logged in as has admin permissions, I have to run my apps with administrator privileges in order to get write access to the D drive. This is not the case when I do stuff on the C drive. I could just get into running those apps that access the D drive in admin mode, but that seems like overkill. Is there some secret switch I can flip so that my D drive acts like my C drive, security-wise?

    Read the article

  • How do I set the UNC permissions on a SQL Server 2008 Filestream UNC?

    - by Justin Dearing
    I have a SQL Server 2008 instance. I have configured filestream access properly, and use it from one column on one table in one of my databases. However, I cannot access the UNC share for the filestream data. I have tried browsing to it as well as trying to open specific files and I get errors both ways. I am running SQL Server 2008 enterprise on a Windows 7 workstation running on the domain. I've tried running the sql server service as a local user, then as network admin. The user I am logged in as is a local admin and a sysadmin in SQL server.

    Read the article

  • Lighttpd with FastCGI configuration running ViewVC - rewrite problems

    - by 0xC0000022L
    At the moment I am struggling with the configuration of lighttpd together with ViewVC. The configuration was ported from Apache 2.2.x, which is still running on the machine, serving the WebDAV/SVN stuff, being proxied through. Now, the problem I am having appears to be with the rewrite rules and I'm not really sure what I am missing here. Here's my configuration (slightly condensed to keep it concise): var.hgwebfcgi = "/var/www/vcs/bin/hgweb.fcgi" var.viewvcfcgi = "/var/www/vcs/bin/wsgi/viewvc.fcgi" var.viewvcstatic = "/var/www/vcs/templates/docroot" var.vcs_errorlog = "/var/log/lighttpd/error.log" var.vcs_accesslog = "/var/log/lighttpd/access.log" $HTTP["host"] =~ "domain.tld" { $SERVER["socket"] == ":443" { protocol = "https://" ssl.engine = "enable" ssl.pemfile = "/etc/lighttpd/ssl/..." ssl.ca-file = "/etc/lighttpd/ssl/..." ssl.use-sslv2 = "disable" setenv.add-environment = ( "HTTPS" => "on" ) url.rewrite-once += ("^/mercurial$" => "/mercurial/" ) url.rewrite-once += ("^/$" => "/viewvc.fcgi" ) alias.url += ( "/viewvc-static" => var.viewvcstatic ) alias.url += ( "/robots.txt" => var.robots ) alias.url += ( "/favicon.ico" => var.favicon ) alias.url += ( "/mercurial" => var.hgwebfcgi ) alias.url += ( "/viewvc.fcgi" => var.viewvcfcgi ) $HTTP["url"] =~ "^/mercurial" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.hgwebfcgi, "socket" => "/tmp/hgwebdir.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } else $HTTP["url"] =~ "^/viewvc\.fcgi" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.viewvcfcgi, "socket" => "/tmp/viewvc.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } expire.url = ( "/viewvc-static" => "access plus 60 days" ) server.errorlog = var.vcs_errorlog accesslog.filename = var.vcs_accesslog } } Now, when I access the domain.tld, I correctly see the index of the repositories. However, when I look at the links for each respective repository (or click them, for that matter), it's of the form https://domain.tld/viewvc.fcgi/reponame instead of the intended https://domain.tld/reponame. What do I have to change/add to achieve this? Do I have to "abuse" the index file mechanism somehow? Goal is to keep the /mercurial alias functional. So far I've tried sifting through the lighttpd book from Packt again, also through the lighttpd documentation, but found nothing that seemed to match the problem.

    Read the article

  • ASA 5505 8.4 open ports for subnet

    - by fwrawx
    I have an ASA 5505 running 8.4 with its outside interface plugged into our internal network. I want to open up access to hosts on one of the vlans behind that ASA to hosts on our internal network. I was just starting to grasp NAT on our older PIX but the ASA 8.4 has me confused now. Given a clean ASA with an outside vlan of 10.0.0.1/24 and test vlan of 10.0.1.1/24 what's the basic configuration needed to allow any hosts on the outside network to have access to any of the hosts on the test network?

    Read the article

  • some keyboard keys not working properly

    - by surfmadpig
    I'm using Windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

    Read the article

  • Windows Server 2003 (as workstation) unable to write to Samba fileshares

    - by remyhorton
    Setup is a Samba fileserver under Linux, which i am trying to access from a Windows Server 2003 box which has been reconfigured as a workstation. I can log onto the fileshares and can copy/delete files, but trying to open a file then write to it fails. Renaming files also fails with an error about requiring a filename. Drag/dropping files onto Xemacs gives me a message about copying from the network zone, and once open the file is read-only. Any ideas of what is wrong? I suspect it is a miscommunication of security details, as folder security options are all unchecked (checking them has no effect). I know it is not a problem with Samba itself, as Window2000, WindowsXP, and Nautulas (under Linux) can all access/edit fileshare files fine using the same userid/password. I am not using domain logins.

    Read the article

  • Signal strength and Speed of wireless network

    - by Tim
    As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

    Read the article

  • Single NFS folder shared across multiple clients

    - by parthi_for_tech
    I'm trying to mount a single NFS folder from server say "/share/folder" to multiple clients up to 32 clients, and the clients tries to access the folder and create files. The problem I'm facing is that when I execute the write command I see only one client is able to access the folder the remaining clients are blocked and not able to proceed to write. So, is whatever I'm trying to do above is correct? Can we write/read files from the same folder on multiple clients? if yes how can I do it prallel? Kindly advice! Thanks

    Read the article

  • Cant remove/delete symlink

    - by user477519
    I have tried to create a symlink and it threw this error: ln: accessing `.test': Permission denied Now I can't unlink or delete the symlink file. Tried Googling for help but could not find a solution. Please find the results of following commands. stat .test : File: `.test'stat: cannot read symbolic link `.test': Permission denied Size: 26 Blocks: 0 IO Block: 16384 symbolic link Device: 1fh/31d Inode: 312075453 Links: 1 Access: (0777/lrwxrwxrwx) Uid: (11160/ chatt) Gid: (11307/ pgr) Access: 2012-11-12 11:36:51.167327500 +0000 Modify: 2012-11-12 11:36:51.163331700 +0000 Change: 2012-11-12 11:36:51.163331700 +0000 Birth: - chattr -i .test: chattr: Permission denied while trying to stat .test lsatter .test lsattr: Operation not supported While reading flags on .test Any help would be appreciated. Thanks

    Read the article

  • vsftpd with pam_winbind.so

    - by David
    I'm trying to setup vsftpd to use logins from our domain. I want the ftp users to be able to login using their active directory username/password and have be able to have full access to /media/storage/ftp/username. I setup pptp using winbind and it is working fine, so I belive the issue is with vsftpd and pam. The ftp server runs and gives 530 for the login. I turned on debug for the pam module, but I see nothing in the syslog. Vsftp only logs a wrong login in its log. /etc/pam.d/vsftpd auth required pam_winbind.so debug /etc/vsftpd.conf listen=YES listen_ipv6=NO connect_from_port_20=YES anonymous_enable=NO local_enable=YES write_enable=YES xferlog_enable=YES idle_session_timeout=600 data_connection_timeout=120 nopriv_user=ftp ftpd_banner=Welcome to Scantiva! Authorized access only! local_umask=022 local_root=/media/storage/ftp/$USER user_sub_token=$USER chroot_local_user=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd guest_enable=YES guest_username=ftp ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=NO force_local_logins_ssl=NO ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES rsa_cert_file=/etc/ssl/private/vsftpd.pem

    Read the article

  • Mount linux partition as Windows network share over internet

    - by CptEO
    I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

    Read the article

  • Dial-in VPN Routing issue when on 192.168.x.x network range

    - by Ian
    I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

    Read the article

  • VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

    - by Chris Miller
    Firstly, is this possible? The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual server with one network card running windows server 2008r2. I need to set up a site-to-site style VPN using IPsec between the firewall of one ISP and the windows host on the other (gateway-to-host). This host has to run a SQL-Server that I can access from the other ISP's servers through the VPN tunnel. It seems looking at the RFC for IPsec that this should be possible using the features of Windows 2008, but I can't get it to work so far... It seems that I can't access any services running on the same computer or IP address used as the tunnel endpoint? Thanks Chris

    Read the article

  • How to get Apache web server to run on other computers?

    - by Eric
    I have been using Apache Web Server for a while now and one thing I have noticed is that outside of my computer I can not access it. I use my Apache server for PHP development on my computer, but I would like to access stuff I have made outside of my computer. I am on a linksys router network. I usually run it of http://localhost/ or http://127.0.0.1/. I IPCONFIGED my computer and got 192.168.1.105 so I went there with my browser and got the page just fine. I tried doing this on another computer on the same network but it didn't work. How do I fix this? Sorry about the bad wording. I am in ah hurry Information you might need to know: Server: Apache 2.2 Operating System: Windows 7 ULTIMATE

    Read the article

  • How to forward connection from one interface to another under linux

    - by Daniel
    Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

    Read the article

  • SSH Connection Refused - Debug using Recovery Console

    - by olrehm
    Hey everyone, I have found a ton of questions answered about debugging why one cannot connect via SSH, but they all seem to require that you can still access the system - or say that without that nothing can be done. In my case, I cannot access the system directly, but I do have access to the filesystem using a recovery console. So this is the situation: My provider made some kernel update today and in the process also rebooted my server. For some reason, I cannot connect via SSH anymore, but instead get a ssh: connect to host mydomain.de port 22: Connection refused I do not know whether sshd is just not running, or whether something (e.g. iptables) blocks my ssh connection attempts. I looked at the logfiles, none of the files in /var/log contain any mentioning on ssh, and /var/log/auth.log is empty. Before the kernel update, I could log in just fine and used certificates so that I would not need a password everytime I connect from my local machine. What I tried so far: I looked in /etc/rc*.d/ for a link to the /etc/init.d/ssh script and found none. So I am expecting that sshd is not started properly on boot. Since I cannot run any programs in my system, I cannot use update-rc to change this. I tried to make a link manually using ln -s /etc/init.d/ssh /etc/rc6.d/K09sshd and restarted the server - this did not fix the problem. I do not know wether it is at all possible to do it like this and whether it is correct to create it in rc6.d and whether the K09 is correct. I just copied that from apache. I also tried to change my /etc/iptables.rules file to allow everything: # Generated by iptables-save v1.4.0 on Thu Dec 10 18:05:32 2009 *mangle :PREROUTING ACCEPT [7468813:1758703692] :INPUT ACCEPT [7468810:1758703548] :FORWARD ACCEPT [3:144] :OUTPUT ACCEPT [7935930:3682829426] :POSTROUTING ACCEPT [7935933:3682829570] COMMIT # Completed on Thu Dec 10 18:05:32 2009 # Generated by iptables-save v1.4.0 on Thu Dec 10 18:05:32 2009 *filter :INPUT ACCEPT [7339662:1665166559] :FORWARD ACCEPT [3:144] :OUTPUT ACCEPT [7935930:3682829426] -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT -A INPUT -p tcp -m tcp --dport 993 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 143 -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 8080 -s localhost -j ACCEPT -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 -A INPUT -j ACCEPT -A FORWARD -j ACCEPT -A OUTPUT -j ACCEPT COMMIT # Completed on Thu Dec 10 18:05:32 2009 # Generated by iptables-save v1.4.0 on Thu Dec 10 18:05:32 2009 *nat :PREROUTING ACCEPT [101662:5379853] :POSTROUTING ACCEPT [393275:25394346] :OUTPUT ACCEPT [393273:25394250] COMMIT # Completed on Thu Dec 10 18:05:32 2009 I am not sure this is done correctly or has any effect at all. I also did not find any mentioning of iptables in any file in /var/log. So what else can I do? Thank you for your help.

    Read the article

  • Very slow accessing printer shared from Windows Machine

    - by Tarski
    Hello, How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

    Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >