Search Results

Search found 33194 results on 1328 pages for 'development approach'.

Page 431/1328 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

• How to limit click'n'drag movement to an area?

  - by Vexille

  I apologize for the somewhat generic title. I'm really don't have much clue about how to accomplish what I'm trying to do, which is making it harder even to research a possible solution. I'm trying to implement a path marker of sorts (maybe there's a most suitable name for it, but this is the best I could come up with). In front of the player there will be a path marker, which will determine how the player will move once he finishes planning his turn. The player may click and drag the marker to the position they choose, but the marker can only be moved within a defined working area (the gray bit). So I'm now stuck with two problems: First of all, how exactly should I define that workable area? I can imagine maybe two vectors that have the player as a starting point to form the workable angle, and maybe those two arcs could come from circles that have their center where the player is, but I definetly don't know how to put this all together. And secondly, after I've defined the area where the marker can be placed, how can I enforce that the marker should only stay within that area? For example, if the player clicks and drags the marker around, it may move freely within the working area, but must not leave the boundaries of the area. So for example, if the player starts dragging the marker upwards, it will move upwards until it hits he end of the working area (first diagram below), but if after that the player starts dragging sideways, the marker must follow the drag while still within the area (second diagram below). I hope this wasn't all too confusing. Thanks, guys.

  Read the article

• Using 2D sprites and 3D models together

  - by Sweta Dwivedi

  I have gone through a few posts that talks about changing the GraphicsDevice.BlendState and GraphicsDevice.DepthStencilState (SpriteBatch & Render states). . however even after changing the states .. i cant see my 3D model on the screen.. I see the model for a second before i draw my video in the background. . Here is the code: case GameState.InGame: GraphicsDevice.Clear(Color.AliceBlue); spriteBatch.Begin(); if (player.State != MediaState.Stopped) { videoTexture = player.GetTexture(); } Rectangle screen = new Rectangle(GraphicsDevice.Viewport.X, GraphicsDevice.Viewport.Y, GraphicsDevice.Viewport.Width, GraphicsDevice.Viewport.Height); // Draw the video, if we have a texture to draw. if (videoTexture != null) { spriteBatch.Draw(videoTexture, screen, Color.White); if (Selected_underwater == true) { spriteBatch.DrawString(font, "MaxX , MaxY" + maxWidth + "," + maxHeight, new Vector2(400, 10), Color.Red); spriteBatch.Draw(kinectRGBVideo, new Rectangle(0, 0, 100, 100), Color.White); spriteBatch.Draw(butterfly, handPosition, Color.White); foreach (AnimatedSprite a in aSprites) { a.Draw(spriteBatch); } } if(Selected_planet == true) { spriteBatch.Draw(kinectRGBVideo, new Rectangle(0, 0, 100, 100), Color.White); spriteBatch.Draw(butterfly, handPosition, Color.White); spriteBatch.Draw(videoTexture,screen,Color.White); GraphicsDevice.BlendState = BlendState.Opaque; GraphicsDevice.DepthStencilState = DepthStencilState.Default; GraphicsDevice.SamplerStates[0] = SamplerState.LinearWrap; foreach (_3DModel m in Solar) { m.DrawModel(); } } spriteBatch.End(); break;

  Read the article

• Checker AI in visual basic not working [on hold]

  - by Eugene Galkine

  I am trying to a make checkers in visual basic with ai. I am using the minimax algorithm (or at least what I understand of it) and it works, except the ai is retarded and plays like it is trying to loose and I tried to switch around the min and the max but the results are IDENTICAL. I am pissed of and have been trying to fix it for over a week now, I would really appreciate it if someone could help me out here. I have 3 years experience of programming (in Java, only about of month of VB experience) and I always am able to solve all my errors on my own so I don't know why I can't get this to work. The program is not at all optimized or anything at this point and is over 1.2K lines long, so here is the entire vb project instead: https://www.dropbox.com/sh/evii0jendn93ir2/9fntwH2dNW I would really appreciate any help I could get.

  Read the article

• Including slick2d or slick-util in maven build?

  - by BotskoNet

  I'm converting a project to lwjgl and trying to use slick-util as well. There's no slick-util maven repo anywhere (nor slick2d itself anymore). I've included local dependancies before using <dependency> <groupId>org.newdawn</groupId> <artifactId>slick</artifactId> <version>237</version> <scope>system</scope> <systemPath>${project.basedir}/lib/slick-util.jar</systemPath> </dependency> The maven package process runs without issue, but when I try to run the jar, it errors out with a ClassNotFoundException. There's no mention of slick-util in the manifest and I can't find out how to make my game load that jar properly. Side question: how do I ensure when I distribute my applications, the game properly installs these libraries?

  Read the article

• Mesh with quads to triangle mesh

  - by scape

  I want to use Blender for making models yet realize some of the polygons are not triangles but contain quads or more (example: cylinder top and bottom). I could export the the mesh as a basic mesh file and import it in to an openGL application and workout rendering the quads as tris, but anything with more than 4 vert indices is beyond me. Is it typical to convert the mesh to a triangle-based mesh inside blender before exporting it? I actually tried this through the quads_convert_to_tris method within a blender py script and the top of the cylinder does not look symmetrical. What is typically done to render a loaded mesh as a tri?

  Read the article

• Blur gets displaced compared to original image

  - by user1294203

  I have implemented a SSAO and I'm using a blur step to smooth it out. The problem is that the blurred texture is slightly displaced compared to the original. I'm blurring using a 4x4 kernel since that was my noise kernel in SSAO. The following is the blurring shader: float result = 0.0; for(int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ vec2 offset = vec2(TEXEL_SIZE.x * i, TEXEL_SIZE.y * j); result += texture(aoSampler, TexCoord + offset).r; } } out_AO = vec4(vec3(0.0), result * 0.0625); Where TEXEL_SIZE is one over my window resolution. I was thinking that this is was an error based on how OpenGL counts the Texel center, so I tried displacing the texture coordinate I was using by 0.5 * TEXEL_SIZE, but there was still a slight displacement. The texture input to my blur shader, has wrap parameters: glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); When I tell the blur shader to just output the the value of the pixel, the result is not displaced, so it must have something to do with how neighboring pixels are sampled. Any thoughts?

  Read the article

• Meaning of offset in pygame Mask.overlap methods

  - by Alan

  I have a situation in which two rectangles collide, and I have to detect how much did they collide so so I can redraw the objects in a way that they are only touching each others edges. It's a situation in which a moving ball should hit a completely unmovable wall and instantly stop moving. Since the ball sometimes moves multiple pixels per screen refresh, it it possible that it enters the wall with more that half its surface when the collision is detected, in which case i want to shift it position back to the point where it only touches the edges of the wall. Here is the conceptual image it: I decided to implement this with masks, and thought that i could supply the masks of both objects (wall and ball) and get the surface (as a square) of their intersection. However, there is also the offset parameter which i don't understand. Here are the docs for the method: Mask.overlap Returns the point of intersection if the masks overlap with the given offset - or None if it does not overlap. Mask.overlap(othermask, offset) -> x,y The overlap tests uses the following offsets (which may be negative): +----+----------.. |A | yoffset | +-+----------.. +--|B |xoffset | | : :

  Read the article

• Balancing game difficulty against player progression

  - by Raven Dreamer

  It seems that the current climate of games seems to cater to an obvious progression of player power, whether that means getting a bigger, more explosive gun in Halo, leveling up in an RPG, or unlocking new options in Command and Conquer 4. Yet this concept is not exclusive to video or computer games -- even in Dungeons and Dragons players can strive to acquire a +2 sword to replace the +1 weapon they've been using. Yet as a systems designer, the concept of player progression is giving me headache after headache. Should I balance around the players exact capabilities and give up on a simple linear progression? (I think ESIV:Oblivion is a good example of this) Is it better to throw the players into an "arms race" with their opponents, where if the players don't progress in an orderly manner, it is only a matter of time until gameplay is unbearably difficult? (4th Edition DnD strikes me as a good example of this) Perhaps it would make most sense to untether the core gameplay mechanics from progression at all -- give them flashier, more interesting (but not more powerful!) ways to grow?

  Read the article

• Which data structure you will use to for a witness list?

  - by mateen

  I'm making a game where the plot is a bank robbery. Lots of people witness that robbery. The game will load a list of suspects, while the players (witnesses) will have to identify the suspects of this robbery. The game should load a list of suspects to identify the one as quickly as possible. Admin can add/remove suspects in the lists and two or more lists of suspects can also be merged into one (to show it to the player). The question is which data structure will be suitable to develop the lists?

  Read the article

• Draw multiple objects with textures

  - by Simplex

  I want to draw cubes using textures. void OperateWithMainMatrix(ESContext* esContext, GLfloat offsetX, GLfloat offsetY, GLfloat offsetZ) { UserData *userData = (UserData*) esContext->userData; ESMatrix modelview; ESMatrix perspective; //Manipulation with matrix ... glVertexAttribPointer(userData->positionLoc, 3, GL_FLOAT, GL_FALSE, 0, cubeFaces); //in cubeFaces coordinates verticles cube glVertexAttribPointer(userData->normalLoc, 3, GL_FLOAT, GL_FALSE, 0, cubeFaces); //for normals (use in fragment shaider for textures) glEnableVertexAttribArray(userData->positionLoc); glEnableVertexAttribArray(userData->normalLoc); // Load the MVP matrix glUniformMatrix4fv(userData->mvpLoc, 1, GL_FALSE, (GLfloat*)&userData->mvpMatrix.m[0][0]); //Bind base map glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_CUBE_MAP, userData->baseMapTexId); //Set the base map sampler to texture unit to 0 glUniform1i(userData->baseMapLoc, 0); // Draw the cube glDrawArrays(GL_TRIANGLES, 0, 36); } (coordinates transformation is in OperateWithMainMatrix() ) Then Draw() function is called: void Draw(ESContext *esContext) { UserData *userData = esContext->userData; // Set the viewport glViewport(0, 0, esContext->width, esContext->height); // Clear the color buffer glClear(GL_COLOR_BUFFER_BIT); // Use the program object glUseProgram(userData->programObject); OperateWithMainMatrix(esContext, 0.0f, 0.0f, 0.0f); eglSwapBuffers(esContext->eglDisplay, esContext->eglSurface); } This work fine, but if I try to draw multiple cubes (next code for example): void Draw(ESContext *esContext) { ... // Use the program object glUseProgram(userData->programObject); OperateWithMainMatrix(esContext, 2.0f, 0.0f, 0.0f); OperateWithMainMatrix(esContext, 1.0f, 0.0f, 0.0f); OperateWithMainMatrix(esContext, 0.0f, 0.0f, 0.0f); OperateWithMainMatrix(esContext, -1.0f, 0.0f, 0.0f); OperateWithMainMatrix(esContext, -2.0f, 0.0f, 0.0f); eglSwapBuffers(esContext->eglDisplay, esContext->eglSurface); } A side faces overlapes frontal face. The side face of the right cube overlaps frontal face of the center cube. How can i remove this effect and display miltiple cubes without it?

  Read the article

• Updating physics for animated models

  - by Mathias Hölzl

  For a new game we have do set up a scene with a minimum of 30 bone animated models.(shooter) The problem is that the update process for the animated models takes too long. Thats what I do: Each character has ~30 bones and for every update tick the animation gets calculated and every bone fires a event with the new matrix. The physics receives the event with the new matrix and updates the collision shape for that bone. The time that it takes to build the animation isn't that bad (0.2ms for 30 Bones - 6ms for 30 models). But the main problem is that the physic engine (Bullet) uses a diffrent matrix for transformation and so its necessary to convert it. Code for matrix conversion: (~0.005ms) btTransform CLEAR_PHYSICS_API Mat_to_btTransform( Mat mat ) { btMatrix3x3 bulletRotation; btVector3 bulletPosition; XMFLOAT4X4 matData = mat.GetStorage(); // copy rotation matrix for ( int row=0; row<3; ++row ) for ( int column=0; column<3; ++column ) bulletRotation[row][column] = matData.m[column][row]; for ( int column=0; column<3; ++column ) bulletPosition[column] = matData.m[3][column]; return btTransform( bulletRotation, bulletPosition ); } The function for updating the transform(Physic): void CLEAR_PHYSICS_API BulletPhysics::VKinematicMove(Mat mat, ActorId aid) { if ( btRigidBody * const body = FindActorBody( aid ) ) { btTransform tmp = Mat_to_btTransform( mat ); body->setWorldTransform( tmp ); } } The real problem is the function FindActorBody(id): ActorIDToBulletActorMap::const_iterator found = m_actorBodies.find( id ); if ( found != m_actorBodies.end() ) return found->second; All physic actors are stored in m_actorBodies and thats why the updating process takes to long. But I have no idea how I could avoid this. Friendly greedings, Mathias

  Read the article

• Camera closes in on the fixed point

  - by V1ncam

  I've been trying to create a camera that is controlled by the mouse and rotates around a fixed point (read: (0,0,0)), both vertical and horizontal. This is what I've come up with: camera.Eye = Vector3.Transform(camera.Eye, Matrix.CreateRotationY(camRotYFloat)); Vector3 customAxis = new Vector3(-camera.Eye.Z, 0, camera.Eye.X); camera.Eye = Vector3.Transform(camera.Eye, Matrix.CreateFromAxisAngle(customAxis, camRotXFloat * 0.0001f)); This works quit well, except from the fact that when I 'use' the second transformation (go up and down with the mouse) the camera not only goes up and down, it also closes in on the point. It zooms in. How do I prevent this? Thanks in advance.

  Read the article

• Doing powerups in a component-based system

  - by deft_code

  I'm just starting really getting my head around component based design. I don't know what the "right" way to do this is. Here's the scenario. The player can equip a shield. The the shield is drawn as bubble around the player, it has a separate collision shape, and reduces the damage the player receives from area effects. How is such a shield architected in a component based game? Where I get confused is that the shield obviously has three components associated with it. Damage reduction / filtering A sprite A collider. To make it worse different shield variations could have even more behaviors, all of which could be components: boost player maximum health health regen projectile deflection etc Am I overthinking this? Should the shield just be a super component? I really think this is wrong answer. So if you think this is the way to go please explain. Should the shield be its own entity that tracks the location of the player? That might make it hard to implement the damage filtering. It also kinda blurs the lines between attached components and entities. Should the shield be a component that houses other components? I've never seen or heard of anything like this, but maybe it's common and I'm just not deep enough yet. Should the shield just be a set of components that get added to the player? Possibly with an extra component to manage the others, e.g. so they can all be removed as a group. (accidentally leave behind the damage reduction component, now that would be fun). Something else that's obvious to someone with more component experience?

  Read the article

• SDL_image & OpenGL Problem

  - by Dylan

  i've been following tutorials online to load textures using SDL and display them on a opengl quad. but ive been getting weird results that no one else on the internet seems to be getting... so when i render the texture in opengl i get something like this. http://www.kiddiescissors.com/after.png when the original .bmp file is this: http://www.kiddiescissors.com/before.bmp ive tried other images too, so its not that this particular image is corrupt. it seems like my rgb channels are all jumbled or something. im pulling my hair out at this point. heres the relevant code from my init() function if ( SDL_Init(SDL_INIT_VIDEO) != 0 ) { return 1; } SDL_GL_SetAttribute(SDL_GL_DOUBLEBUFFER, 1); SDL_GL_SetAttribute( SDL_GL_RED_SIZE, 8 ); SDL_GL_SetAttribute( SDL_GL_GREEN_SIZE, 8 ); SDL_GL_SetAttribute( SDL_GL_BLUE_SIZE, 8 ); SDL_GL_SetAttribute( SDL_GL_ALPHA_SIZE, 8 ); SDL_GL_SetAttribute(SDL_GL_MULTISAMPLEBUFFERS, 1); SDL_GL_SetAttribute(SDL_GL_MULTISAMPLESAMPLES, 4); SDL_SetVideoMode(WINDOW_WIDTH, WINDOW_HEIGHT, 32, SDL_HWSURFACE | SDL_GL_DOUBLEBUFFER | SDL_OPENGL); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(50, (GLfloat)WINDOW_WIDTH/WINDOW_HEIGHT, 1, 50); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glEnable(GL_DEPTH_TEST); glEnable(GL_MULTISAMPLE); glEnable(GL_TEXTURE_2D); glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA); glEnable(GL_BLEND); heres the code that is called when my main player object (the one with which this sprite is associated) is initialized texture = 0; SDL_Surface* surface = IMG_Load("i.bmp"); glGenTextures(1, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, surface->w, surface->h, 0, GL_RGB, GL_UNSIGNED_BYTE, surface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); SDL_FreeSurface(surface); and then heres the relevant code from my display function glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); glColor4f(1, 1, 1, 1); glPushMatrix(); glBindTexture(GL_TEXTURE_2D, texture); glTranslatef(getCenter().x, getCenter().y, 0); glRotatef(getAngle()*(180/M_PI), 0, 0, 1); glTranslatef(-getCenter().x, -getCenter().y, 0); glBegin(GL_QUADS); glTexCoord2f(0, 0); glVertex3f(getTopLeft().x, getTopLeft().y, 0); glTexCoord2f(0, 1); glVertex3f(getTopLeft().x, getTopLeft().y + size.y, 0); glTexCoord2f(1, 1); glVertex3f(getTopLeft().x + size.x, getTopLeft().y + size.y, 0); glTexCoord2f(1, 0); glVertex3f(getTopLeft().x + size.x, getTopLeft().y, 0); glEnd(); glPopMatrix(); let me know if i left out anything important... or if you need more info from me. thanks a ton, -Dylan

  Read the article

• 2D object-aligned bounding-box intersection test

  - by AshleysBrain

  Hi all, I have two object-aligned bounding boxes (i.e. not axis aligned, they rotate with the object). I'd like to know if two object-aligned boxes overlap. (Edit: note - I'm using an axis-aligned bounding box test to quickly discard distant objects, so it doesn't matter if the quad routine is a little slower.) My boxes are stored as four x,y points. I've searched around for answers, but I can't make sense of the variable names and algorithms in examples to apply them to my particular case. Can someone help show me how this would be done, in a clear and simple way? Thanks. (The particular language isn't important, C-style pseudo code is OK.)

  Read the article

• Camera doesnt move on opengl qt

  - by hugo

  Here is my code, as my subject indicates i have implemented a camera but i couldnt make it move,Thanks in advance. #define PI_OVER_180 0.0174532925f define GL_CLAMP_TO_EDGE 0x812F include "metinalifeyyaz.h" include include include include include include include metinalifeyyaz::metinalifeyyaz(QWidget *parent) : QGLWidget(parent) { this->setFocusPolicy(Qt:: StrongFocus); time = QTime::currentTime(); timer = new QTimer(this); timer->setSingleShot(true); connect(timer, SIGNAL(timeout()), this, SLOT(updateGL())); xpos = yrot = zpos = 0; walkbias = walkbiasangle = lookupdown = 0.0f; keyUp = keyDown = keyLeft = keyRight = keyPageUp = keyPageDown = false; } void metinalifeyyaz::drawBall() { //glTranslatef(6,0,4); glutSolidSphere(0.10005,300,30); } metinalifeyyaz:: ~metinalifeyyaz(){ glDeleteTextures(1,texture); } void metinalifeyyaz::initializeGL(){ glShadeModel(GL_SMOOTH); glClearColor(1.0,1.0,1.0,0.5); glClearDepth(1.0f); glEnable(GL_DEPTH_TEST); glEnable(GL_TEXTURE_2D); glDepthFunc(GL_LEQUAL); glClearColor(1.0,1.0,1.0,1.0); glShadeModel(GL_SMOOTH); GLfloat mat_specular[]={1.0,1.0,1.0,1.0}; GLfloat mat_shininess []={30.0}; GLfloat light_position[]={1.0,1.0,1.0}; glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular); glMaterialfv(GL_FRONT,GL_SHININESS,mat_shininess); glLightfv(GL_LIGHT0, GL_POSITION, light_position); glEnable(GL_LIGHT0); glEnable(GL_LIGHTING); QImage img1 = convertToGLFormat(QImage(":/new/prefix1/halisaha2.bmp")); QImage img2 = convertToGLFormat(QImage(":/new/prefix1/white.bmp")); glGenTextures(2,texture); glBindTexture(GL_TEXTURE_2D, texture[0]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img1.width(), img1.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img1.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glBindTexture(GL_TEXTURE_2D, texture[1]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img2.width(), img2.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img2.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); // Really nice perspective calculations } void metinalifeyyaz::resizeGL(int w, int h){ if(h==0) h=1; glViewport(0,0,w,h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, static_cast<GLfloat>(w)/h,0.1f,100.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); } void metinalifeyyaz::paintGL(){ movePlayer(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); GLfloat xtrans = -xpos; GLfloat ytrans = -walkbias - 0.50f; GLfloat ztrans = -zpos; GLfloat sceneroty = 360.0f - yrot; glLoadIdentity(); glRotatef(lookupdown, 1.0f, 0.0f, 0.0f); glRotatef(sceneroty, 0.0f, 1.0f, 0.0f); glTranslatef(xtrans, ytrans+50, ztrans-130); glLoadIdentity(); glTranslatef(1.0f,0.0f,-18.0f); glRotatef(45,1,0,0); drawScene(); int delay = time.msecsTo(QTime::currentTime()); if (delay == 0) delay = 1; time = QTime::currentTime(); timer->start(qMax(0,10 - delay)); } void metinalifeyyaz::movePlayer() { if (keyUp) { xpos -= sin(yrot * PI_OVER_180) * 0.5f; zpos -= cos(yrot * PI_OVER_180) * 0.5f; if (walkbiasangle >= 360.0f) walkbiasangle = 0.0f; else walkbiasangle += 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } else if (keyDown) { xpos += sin(yrot * PI_OVER_180)*0.5f; zpos += cos(yrot * PI_OVER_180)*0.5f ; if (walkbiasangle <= 7.0f) walkbiasangle = 360.0f; else walkbiasangle -= 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } if (keyLeft) yrot += 0.5f; else if (keyRight) yrot -= 0.5f; if (keyPageUp) lookupdown -= 0.5; else if (keyPageDown) lookupdown += 0.5; } void metinalifeyyaz::keyPressEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_Escape: close(); break; case Qt::Key_F1: setWindowState(windowState() ^ Qt::WindowFullScreen); break; default: QGLWidget::keyPressEvent(event); case Qt::Key_PageUp: keyPageUp = true; break; case Qt::Key_PageDown: keyPageDown = true; break; case Qt::Key_Left: keyLeft = true; break; case Qt::Key_Right: keyRight = true; break; case Qt::Key_Up: keyUp = true; break; case Qt::Key_Down: keyDown = true; break; } } void metinalifeyyaz::changeEvent(QEvent *event) { switch (event->type()) { case QEvent::WindowStateChange: if (windowState() == Qt::WindowFullScreen) setCursor(Qt::BlankCursor); else unsetCursor(); break; default: break; } } void metinalifeyyaz::keyReleaseEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_PageUp: keyPageUp = false; break; case Qt::Key_PageDown: keyPageDown = false; break; case Qt::Key_Left: keyLeft = false; break; case Qt::Key_Right: keyRight = false; break; case Qt::Key_Up: keyUp = false; break; case Qt::Key_Down: keyDown = false; break; default: QGLWidget::keyReleaseEvent(event); } } void metinalifeyyaz::drawScene(){ glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,1.0f); // glColor3f(0,0,1); //back glVertex3f(-6,0,-4); glVertex3f(-6,-0.5,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,-1.0f); //front glVertex3f(6,0,4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,0,4); glEnd(); glBegin(GL_QUADS); glNormal3f(-1.0f,0.0f,0.0f); // glColor3f(0,0,1); //left glVertex3f(-6,0,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); // glColor3f(0,0,1); //right glVertex3f(6,0,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(6,0,4); glEnd(); glBindTexture(GL_TEXTURE_2D, texture[0]); glBegin(GL_QUADS); glNormal3f(0.0f,1.0f,0.0f);//top glTexCoord2f(1.0f,0.0f); glVertex3f(6,0,-4); glTexCoord2f(1.0f,1.0f); glVertex3f(6,0,4); glTexCoord2f(0.0f,1.0f); glVertex3f(-6,0,4); glTexCoord2f(0.0f,0.0f); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,-1.0f,0.0f); //glColor3f(0,0,1); //bottom glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glEnd(); // glPushMatrix(); glBindTexture(GL_TEXTURE_2D, texture[1]); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); glTexCoord2f(1.0f,0.0f); //right far goal post front face glVertex3f(5,0.5,-0.95); glTexCoord2f(1.0f,1.0f); glVertex3f(5,0,-0.95); glTexCoord2f(0.0f,1.0f); glVertex3f(5,0,-1); glTexCoord2f(0.0f,0.0f); glVertex3f(5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(5,0.5,-1); glVertex3f(5,0,-1); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5,0,-0.95); glVertex3f(5, 0.5, -0.95); glColor3f(1,1,1); //right near goal post front face glVertex3f(5,0.5,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0,1); glVertex3f(5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(5,0.5,1); glVertex3f(5,0,1); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0.5, 0.95); glColor3f(1,1,1); //right crossbar front face glVertex3f(5,0.55,-1); glVertex3f(5,0.55,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5.05,0.5,1); glVertex3f(5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(5.05,0.5,-1); glVertex3f(5.05,0.5,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5,0.55,1); glVertex3f(5,0.55,-1); glColor3f(1,1,1); //left far goal post front face glVertex3f(-5,0.5,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5,0,-1); glVertex3f(-5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(-5,0.5,-1); glVertex3f(-5,0,-1); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5, 0.5, -0.95); glColor3f(1,1,1); //left near goal post front face glVertex3f(-5,0.5,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0,1); glVertex3f(-5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(-5,0.5,1); glVertex3f(-5,0,1); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0.5, 0.95); glColor3f(1,1,1); //left crossbar front face glVertex3f(-5,0.55,-1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5.05,0.5,1); glVertex3f(-5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(-5.05,0.5,-1); glVertex3f(-5.05,0.5,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.55,-1); glEnd(); // glPopMatrix(); // glPushMatrix(); // glTranslatef(0,0,0); // glutSolidSphere(0.10005,500,30); // glPopMatrix(); }

  Read the article

• Ideas for attack damage algorithm (language irrelevant)

  - by Dillon

  I am working on a game and I need ideas for the damage that will be done to the enemy when your player attacks. The total amount of health that the enemy has is called enemyHealth, and has a value of 1000. You start off with a weapon that does 40 points of damage (may be changed.) The player has an attack stat that you can increase, called playerAttack. This value starts off at 1, and has a possible max value of 100 after you level it up many times and make it farther into the game. The amount of damage that the weapon does is cut and dry, and subtracts 40 points from the total 1000 points of health every time the enemy is hit. But what the playerAttack does is add to that value with a percentage. Here is the algorithm I have now. (I've taken out all of the gui, classes, etc. and given the variables very forward names) double totalDamage = weaponDamage + (weaponDamage*(playerAttack*.05)) enemyHealth -= (int)totalDamage; This seemed to work great for the most part. So I statrted testing some values... //enemyHealth ALWAYS starts at 1000 weaponDamage = 50; playerAttack = 30; If I set these values, the amount of damage done on the enemy is 125. Seemed like a good number, so I wanted to see what would happen if the players attack was maxed out, but with the weakest starting weapon. weaponDamage = 50; playerAttack = 100; the totalDamage ends up being 300, which would kill an enemy in just a few hits. Even with your attack that high, I wouldn't want the weakest weapon to be able to kill the enemy that fast. I thought about adding defense, but I feel the game will lose consistency and become unbalanced in the long run. Possibly a well designed algorithm for a weapon decrease modifier would work for lower level weapons or something like that. Just need a break from trying to figure out the best way to go about this, and maybe someone that has experience with games and keeping the leveling consistent could give me some ideas/pointers.

  Read the article

• 2D Platformer Collision Handling

  - by defender-zone

  Hello, everyone! I am trying to create a 2D platformer (Mario-type) game and I am some having some issues with handling collisions properly. I am writing this game in C++, using SDL for input, image loading, font loading, etcetera. I am also using OpenGL via the FreeGLUT library in conjunction with SDL to display graphics. My method of collision detection is AABB (Axis-Aligned Bounding Box), which is really all I need to start with. What I need is an easy way to both detect which side the collision occurred on and handle the collisions properly. So, basically, if the player collides with the top of the platform, reposition him to the top; if there is a collision to the sides, reposition the player back to the side of the object; if there is a collision to the bottom, reposition the player under the platform. I have tried many different ways of doing this, such as trying to find the penetration depth and repositioning the player backwards by the penetration depth. Sadly, nothing I've tried seems to work correctly. Player movement ends up being very glitchy and repositions the player when I don't want it to. Part of the reason is probably because I feel like this is something so simple but I'm over-thinking it. If anyone thinks they can help, please take a look at the code below and help me try to improve on this if you can. I would like to refrain from using a library to handle this (as I want to learn on my own) or the something like the SAT (Separating Axis Theorem) if at all possible. Thank you in advance for your help! void world1Level1CollisionDetection() { for(int i; i < blocks; i++) { if (de2dCheckCollision(ball,block[i],0.0f,0.0f)==true) { int up = 0; int left = 0; int right = 0; int down = 0; if(ball.coords[0] < block[i].coords[0] && block[i].coords[0] < ball.coords[2] && ball.coords[2] < block[i].coords[2]) { left = 1; } if(block[i].coords[0] < ball.coords[0] && ball.coords[0] < block[i].coords[2] && block[i].coords[2] < ball.coords[2]) { right = 1; } if(ball.coords[1] < block[i].coords[1] && block[i].coords[1] < ball.coords[3] && ball.coords[3] < block[i].coords[3]) { up = 1; } if(block[i].coords[1] < ball.coords[1] && ball.coords[1] < block[i].coords[3] && block[i].coords[3] < ball.coords[3]) { down = 1; } cout << left << ", " << right << ", " << up << ", " << down << ", " << endl; if (left == 1) { ball.coords[0] = block[i].coords[0] - 16.0f; ball.coords[2] = block[i].coords[0] - 0.0f; } if (right == 1) { ball.coords[0] = block[i].coords[2] + 0.0f; ball.coords[2] = block[i].coords[2] + 16.0f; } if (down == 1) { ball.coords[1] = block[i].coords[3] + 0.0f; ball.coords[3] = block[i].coords[3] + 16.0f; } if (up == 1) { ball.yspeed = 0.0f; ball.gravity = 0.0f; ball.coords[1] = block[i].coords[1] - 16.0f; ball.coords[3] = block[i].coords[1] - 0.0f; } } if (de2dCheckCollision(ball,block[i],0.0f,0.0f)==false) { ball.gravity = -0.5f; } } } To explain what some of this code means: The blocks variable is basically an integer that is storing the amount of blocks, or platforms. I am checking all of the blocks using a for loop, and the number that the loop is currently on is represented by integer i. The coordinate system might seem a little weird, so that's worth explaining. coords[0] represents the x position (left) of the object (where it starts on the x axis). coords[1] represents the y position (top) of the object (where it starts on the y axis). coords[2] represents the width of the object plus coords[0] (right). coords[3] represents the height of the object plus coords[1] (bottom). de2dCheckCollision performs an AABB collision detection. Up is negative y and down is positive y, as it is in most games. Hopefully I have provided enough information for someone to help me successfully. If there is something I left out that might be crucial, let me know and I'll provide the necessary information. Finally, for anyone who can help, providing code would be very helpful and much appreciated. Thank you again for your help!

  Read the article

• How to use batch rendering with an entity component system?

  - by Kiril

  I have an entity component system and a 2D rendering engine. Because I have a lot of repeating sprites (the entities are non-animated, the background is tile based) I would really like to use batch rendering to reduce calls to the drawing routine. What would be the best way to integrate this with an engtity system? I thought about creating and populating the sprite batche every frame update, but that will probably be very slow. A better way would be to add a reference to an entity's quad to the sprite batch at initialization, but that would mean that the entity factory has to be aware of the Rendering System or that the sprite batch has to be a component of some Cache entity. One case violates encapsulation pretty heavily, while the other forces a non-game object entity in the entity system, which I am not sure I like a lot. As for engine, I am using Love2D (Love2D website) and FEZ ( FEZ website) as entity system(so everything is in Lua). I am more interested in a generic pattern of how to properly implement that rather than a language/library specific solution. Thanks in advance!

  Read the article

• Is there a simpler way to create a borderless window with XNA 4.0?

  - by Cypher

  When looking into making my XNA game's window border-less, I found no properties or methods under Game.Window that would provide this, but I did find a window handle to the form. I was able to accomplish what I wanted by doing this: IntPtr hWnd = this.Window.Handle; var control = System.Windows.Forms.Control.FromHandle( hWnd ); var form = control.FindForm(); form.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None; I don't know why but this feels like a dirty hack. Is there a built-in way to do this in XNA that I'm missing?

  Read the article

• OpenGL Tessellation makes point

  - by urza57

  A little problem with my tessellation shader. I try to implement a simple tessellation shader but it only makes points. Here's my vertex shader : out vec4 ecPosition; out vec3 ecNormal; void main( void ) { vec4 position = gl_Vertex; gl_Position = gl_ModelViewProjectionMatrix * position; ecPosition = gl_ModelViewMatrix * position; ecNormal = normalize(gl_NormalMatrix * gl_Normal); } My tessellation control shader : layout(vertices = 3) out; out vec4 ecPosition3[]; in vec3 ecNormal[]; in vec4 ecPosition[]; out vec3 myNormal[]; void main() { gl_out[gl_InvocationID].gl_Position = gl_in[gl_InvocationID].gl_Position; myNormal[gl_InvocationID] = ecNormal[gl_InvocationID]; ecPosition3[gl_InvocationID] = ecPosition[gl_InvocationID]; gl_TessLevelOuter[0] = float(4.0); gl_TessLevelOuter[1] = float(4.0); gl_TessLevelOuter[2] = float(4.0); gl_TessLevelInner[0] = float(4.0); } And my Tessellation Evaluation shader: layout(triangles, equal_spacing, ccw) in; in vec3 myNormal[]; in vec4 ecPosition3[]; out vec3 ecNormal; out vec4 ecPosition; void main() { float u = gl_TessCoord.x; float v = gl_TessCoord.y; float w = gl_TessCoord.z; vec3 position = vec4(gl_in[0].gl_Position.xyz * u + gl_in[1].gl_Position.xyz * v + gl_in[2].gl_Position.xyz * w ); vec3 position2 = vec4(ecPosition3[0].xyz * u + ecPosition3[1].xyz * v + ecPosition3[2].xyz * w ); vec3 normal = myNormal[0] * u + myNormal[1] * v + myNormal[2] * w ); ecNormal = normal; gl_Position = vec4(position, 1.0); ecPosition = vec4(position2, 1.0); } Thank you !

  Read the article

• Cocos2d and Body with few collision shapes using chipmunk

  - by Eimantas

  I'm using Cocos2d (0.99.5) with chipmunk physics engine. Currently I'm trying to place a body into space which is combined from few circle shapes. Let's say I have a corresponding sprite image with displays atom (nucleus + 3 electrons around it. Something like this without orbit lines). In it's simplest form - only one circle shape at the center should be enough which would detect collisions from other objects with nucleus. Now I'd like to add other circle shapes for each electron. How can I do that? Now when I add those shapes to the body and add the body into chipmunk space - the shapes (together with the body/sprite) start flickering and spinning with no recognizable pattern (or reason for that matter).

  Read the article

• Beginning android games, 2nd edition engine

  - by Benjamin Stephen

  I recently bought the book from Apress and have worked my way through it, unfortunately, it seems to just be dealing with side scrolling games and not Zelda-like top down games. I was wondering if anyone out there can tell me if it's possible to use their engine to create such a game? It doesn't go into how to build a top down tile map. Using the engine in their book, how can I make a tile map easily that has walls and things like that? Any help would be appreciated. Thanks in advance.

  Read the article

• LibGdx drawing weird behaviour

  - by Ryckes

  I am finding strange behaviour while rendering TextureRegions in my game, only when pausing it. I am making a game for Android, in Java with LibGdx. When I comment out the line "drawLevelPaused()" everything seems to work fine, both running and paused. When it's not commented, everything works fine until I pause the screen, then it draws those two rectangles, but maybe ships are not shown, and if I comment out drawShips() and drawTarget() (just trying) maybe one of the planets disappears, or if I change the order, other things disappear and those that disappeared before now are rendered again. I can't find the way to fix this behaviour I beg your help, and I hope it's my mistake and not a LibGdx issue. I use OpenGL ES 2.0, stated in AndroidManifest.xml, if it is of any help. Thank you in advance. My Screen render method(game loop) is as follows: @Override public void render(float delta) { Gdx.gl.glClearColor(0.1f, 0.1f, 0.1f, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); controller.update(delta); renderer.render(); } When world state is PAUSED controller.update does nothing at all, there is a switch in it. And renderer.render() is as follows: public void render() { int worldState=this.world.getWorldState(); updateCamera(); spriteBatch.begin(); drawPlanets(); drawTarget(); drawShips(); if(worldState==World.PAUSED) { drawLevelPaused(); } else if(worldState==World.LEVEL_WON) { drawLevelWin(); } spriteBatch.end(); } And those methods are: private void updateCamera() { this.offset=world.getCameraOffset(); } private void drawPlanets() { for(Planet planet : this.world.getPlanets()) { this.spriteBatch.draw(this.textures.getTexture(planet.getTexture()), (planet.getPosition().x - this.offset[0]) * ppuX, (planet.getPosition().y - this.offset[1]) * ppuY); } } private void drawTarget() { Target target=this.world.getTarget(); this.spriteBatch.draw(this.textures.getTexture(target.getTexture()), (target.getPosition().x - this.offset[0]) * ppuX, (target.getPosition().y - this.offset[1]) * ppuY); } private void drawShips() { for(Ship ship : this.world.getShips()) { this.spriteBatch.draw(this.textures.getTexture(ship.getTexture()), (ship.getPosition().x - this.offset[0]) * ppuX, (ship.getPosition().y - this.offset[1]) * ppuY, ship.getBounds().width*ppuX/2, ship.getBounds().height*ppuY/2, ship.getBounds().width*ppuX, ship.getBounds().height*ppuY, 1.0f, 1.0f, ship.getAngle()-90.0f); } if(this.world.getStillShipVisibility()) { Ship ship=this.world.getStillShip(); Arrow arrow=this.world.getArrow(); this.spriteBatch.draw(this.textures.getTexture(ship.getTexture()), (ship.getPosition().x - this.offset[0]) * ppuX, (ship.getPosition().y - this.offset[1]) * ppuY, ship.getBounds().width*ppuX/2, ship.getBounds().height*ppuY/2, ship.getBounds().width*ppuX, ship.getBounds().height*ppuY, 1f, 1f, ship.getAngle() - 90f); this.spriteBatch.draw(this.textures.getTexture(arrow.getTexture()), (ship.getCenter().x - this.offset[0] - arrow.getBounds().width/2) * ppuX, (ship.getCenter().y - this.offset[1]) * ppuY, arrow.getBounds().width*ppuX/2, 0, arrow.getBounds().width*ppuX, arrow.getBounds().height*ppuY, 1f, arrow.getRate(), ship.getAngle() - 90f); } } private void drawLevelPaused() { this.shapeRenderer.begin(ShapeType.FilledRectangle); this.shapeRenderer.setColor(0f, 0f, 0f, 0.8f); this.shapeRenderer.filledRect(0, 0, this.width/this.ppuX, PAUSE_MARGIN_HEIGHT/this.ppuY); this.shapeRenderer.filledRect(0, (this.height-PAUSE_MARGIN_HEIGHT)/this.ppuY, this.width/this.ppuX, PAUSE_MARGIN_HEIGHT/this.ppuY); this.shapeRenderer.end(); for(Button button : this.world.getPauseButtons()) { this.spriteBatch.draw(this.textures.getTexture(button.getTexture()), (button.getPosition().x - this.offset[0]) * this.ppuX, (button.getPosition().y - this.offset[1]) * this.ppuY); } }

  Read the article

• Undefined fireball movement behavior

  - by optimisez

  Demonstration video I try to do after the player shoot 10 times of fireball, then delete all the fireball objects and recreate a 10 new set of fireball objects. I did it but there is a weird bug happens that sometimes the fireball will come out from top and move to the right after shooting a few times. All the 10 fireballs should follow the player all the time and all the fireball should come out from player even after a new set of fireballs is recreated. Any ideas to fix it? Variables typedef struct gameObject{ float X; float Y; int length; int height; bool action; }; // Fireball #define FIREBALL_NUM 10 LPDIRECT3DTEXTURE9 fireball = NULL; RECT fireballRect; gameObject *fireballDest = new gameObject[FIREBALL_NUM]; int iFireBallAnimation; int fireballCount = 0; Set up Fireball void setUpFireBall() { // Initialize destination rectangle, rectangle height and length for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].X = 0; fireballDest[i].Y = 0; fireballDest[i].length = fireballRect.right - fireballRect.left; fireballDest[i].height = fireballRect.bottom - fireballRect.top; } iFireBallAnimation = fireballRect.right - fireballRect.left; // Initialize boolean for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].action = false; } } Initialize fireball void initFireball() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "fireball.png", 512, 512, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 0), NULL, NULL, &fireball); // Initialize source rectangle fireballRect.left = 0; fireballRect.top = 256; fireballRect.right = 64; fireballRect.bottom = 320; setUpFireBall(); } Update fireball void update() { updateAnimation(); updateAI(); updatePhysics(); updateGameState(); } void updatePhysics() { motion(); collison(); } void motion() { playerMove(); playerJump(); playerGravity(); shootFireball(); fireballFollowPlayer(); } void shootFireball() { if (keyArr['Z']) fireballDest[fireballCount].action = true; if (fireballDest[fireballCount].action) { fireballDest[fireballCount].X += 10; if (fireballDest[fireballCount].X > 800) fireballCount++; } } void fireballFollowPlayer() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action == false) { fireballDest[i].X = playerDest.X - 30; fireballDest[i].Y = playerDest.Y - 14; } } } void updateGameState() { // When no more fireball left, rearm fireball if (fireballCount == FIREBALL_NUM) { delete[] fireballDest; fireballDest = new gameObject[10]; fireballCount = 0; setUpFireBall(); } } Render fireball void renderFireball() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action) sprite->Draw(fireball, &fireballRect, NULL, &D3DXVECTOR3(fireballDest[i].X, fireballDest[i].Y, 0), D3DCOLOR_XRGB(255,255, 255)); } }

  Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >