Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 435/624 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

  - by Xeoncross

  Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Resolution Chart Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

  Read the article

• error in auth.log but can login; LDAP/PAM

  - by Peter

  I have a server running OpenLDAP. When I start a ssh-session I can log in without problems, but an error appears in the logs. This only happens when I log in with a LDAP account (so not with a system account such as root). Any help to eliminate these errors would be much appreciated. The relevant piece from /var/log/auth.log sshd[6235]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=example.com user=peter sshd[6235]: Accepted password for peter from 192.168.1.2 port 2441 ssh2 sshd[6235]: pam_unix(sshd:session): session opened for user peter by (uid=0) pam common-session session [default=1] pam_permit.so session required pam_unix.so session optional pam_ldap.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 session required pam_limits.so session required pam_unix.so session optional pam_ldap.so pam common-auth auth [success=1 default=ignore] pam_ldap.so auth required pam_unix.so nullok_secure use_first_pass auth required pam_permit.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 silent auth sufficient pam_unix.so nullok_secure use_first_pass auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth required pam_deny.so pam common-account account [success=2 new_authtok_reqd=done default=ignore] pam_ldap.so account [success=1 default=ignore] pam_unix.so account required pam_unix.so account sufficient pam_succeed_if.so uid < 1000 quiet account [default=bad success=ok user_unknown=ignore] pam_ldap.so account required pam_permit.so account sufficient pam_ldap.so account sufficient pam_unix.so

  Read the article

• Windows product key is valid but wont activate

  - by pnongrata

  Last month, I needed to install Windows XP (Pro Version 2002 SP3) from a Reinstallation CD a co-worker gave me, and with a product key the IT team told me to use. Everything installed successfully and I have been using the XP machine for the last 30 days without any problems; however it kept reminding me to activate Windows, and of course, I never did (laziness). It now has me locked out of my machine and won't let me log in until I activate it. So I proceed to the Activation Screen which asks me: Do you want to activate Windows now? I choose "Yes, let's activate Windows over the Internet now.", and click the Next button. It now asks me: Do you want to register while you are activating Windows? I choose "No, I don't want to register now; let's just activate Windows.", and click the Next button. I now see the following screen: Notice how the title reads "Unauthorized product key", and how there are only 3 buttons: Telephone Remind me later Retry Please note that the Retry button is disabled until I enter the full product key that IT gave me, then it enables. However, at no point in time do I see a Next button, indicating that the product key was valid/successful. So instead, I just click the Retry button, and the screen refreshes, this time with a different title Incorrect product key Could something be wrong with the Windows XP reinstallation CD (do they "expire" after a certain amount of time, etc.)? Or is this the normal/typical workflow for what happens when you just have a bad product key? I ask because, after this happened I emailed IT and they supplied me whether several other product keys to try. But every time its the same result, same thing happening over again and again. So I guess it's possible that IT has given me several bad keys, but it's more likely something else is going on here. Any thoughts or ways to troubleshoot? Thanks in advance!

  Read the article

• Problem with diacritics on psql 9.0 (PostgreSQL)

  - by Gaks

  I have two instances of PostgreSQL installed on my server: 8.3 and 9.0. There seams to be some problem with Polish diacritic characters (like óleaszzc) on postgresql 9.0 client - psql. When I connect to DB (either 8.3 or 9.0) with psql 8.3 - I can type all diacritics on the terminal without any problems: www:/tmp# sudo -u postgres /usr/lib/postgresql/8.3/bin/psql -q postgres=# ólscn However, when I connect to the same DBs with psql 9.0 client - I can't type diacritics on the terminal anymore: www:/tmp# sudo -u postgres /usr/lib/postgresql/8.3/bin/psql -q Here are some encoding settings: www:/tmp# sudo -u postgres /usr/lib/postgresql/9.0/bin/psql -q -c "show client_encoding" client_encoding ----------------- UTF8 (1 row) . www:/tmp# sudo -u postgres /usr/lib/postgresql/8.3/bin/psql -q -c "show client_encoding" client_encoding ----------------- UTF8 (1 row) . www:/tmp# sudo -u postgres /usr/lib/postgresql/9.0/bin/psql -q -l List of databases Name | Owner | Encoding | Collation | Ctype | Access privileges ---------------------+--------------+----------+-------------+-------------+----------------------- postgres | postgres | UTF8 | pl_PL.UTF-8 | pl_PL.UTF-8 | . www:/tmp# echo $LANG pl_PL.UTF-8 It looks like DB/cluster configuration doesn't matter - if psql 8.x on terminal works fine and psql 9.x does not. Any idea how to fix that?

  Read the article

• Mapped networkdrive on logout

  - by Robuust

  I'm using a script to keep a mapped networkconnection alive, but ofcourse the mapped connection is gone when I logout. The point is now, that I'm running this on Windows Server 2008 R2, where I use remote desktop to login on the administrator account. However, it should remain logged in and not remove the mapped connection as this script takes care of not logging out on MS office 365 sharepoint. Is there a way to keep the mapped networklocation (L:) available after logout? So the script can run to remain the connection? # Create an IE Object and navigate to my SharePoint Site $ie = New-Object -ComObject InternetExplorer.Application $ie.navigate('https://xxx.sharepoint.com/') # Don't need the object anymore, so let's close it to free up some memory $ie.Quit() # Just in case there was a problem with the web client service # I am going to stop and start it, you could potentially remove this # part if you want. I like it just because it takes out a step of # troubleshooting if I'm having problems. Stop-Service WebClient Start-Service WebClient # We are going to set the $Drive variable here, this is just # going to tell the command what drive letter to map you can # change this to whatever you want (if you change it to a # drive that is already mapped it will overwrite it, so be careful. $Drive = "L:" # You can change the drive destiniation to whatever you want, # it has to be a document library or folder of course. $DrvDest = "https://xxx.sharepoint.com/files/" # Here is where we create the object to map the network drive and # then map the network drive $net = New-Object -ComObject WScript.Network; $net.mapnetworkdrive($Drive,$DrvDest) # That is the end of the script, now schedule this with task # scheduler and every so often and you should be set.

  Read the article

• Share Point ACL on OSX Lion Server - Posix group always takes over ACLs

  - by Ben

  Trying to configure a share point on a Lion Server machine. The directory is created by the local server admin (serveradmin) and has rwxr-x--- given to it. The serveradmin user belongs to the local staff group so serveradmin readwrite staff group read Others none We have an OD group for all the employees (Workers) . Using the Server tool we've given Full Control to the share point: Workers Full Control serveradmin readwrite staff group read Others none We would assume that Workers could then do what they want on the share but that doesn't seem to be the case. It appears the POSIX permissions take over the ACL permissions for Worker. If I change the staff permission to readwrite then the Workers can create a file or folder in the share point. I would think the ACL should take over but it doesn't, posix always win, rendering ACL useless. Furthermore if I leave the readwrite permission for staff and take Write permission away for the Workers group then the posix group still wins. Essentially the Workers ACL does absolutely nothing. There are reports of similar problems in this Apple forum thread: https://discussions.apple.com/thread/3722901 The directory nesting fix suggested there doesn't work for us. Has anyone had similar issues and know how to fix this? Edit: in Workgroup Manager the employees user are set to primary group staff and given the additional OD group Workers. Changing their primary group doesn't help, it only shifts the problem onto Others taking over rights (logically) Edit 2: Ok, this is interesting, adding OD Users to the share's ACL works totally fine

  Read the article

• online backup plan for a home office with servers

  - by TiernanO

  So, i am in the process of tweaking my spending and i need to change my backup plan... I am currently using a mix of JungleDisk and ZManda ZCB to backup files on my MacBook Pro, Main Windows Server Wrokstation, a dedicated Windows Server in a datacenter, and various other machines and file sources. The problem is the cost: this month, it has cost me about $90 to backup a little over 500Gb... This amount of data will increese over time too, since i am backing up Photos (24Mb RAW images + 4-8MB JPEGs), Videos (various cameras shooting 720p and 1080p), Music, Movies, TV shows and Apps from iTunes (though with iTunes cloud, this might not need to be backed up again) and source code... I have looked at the likes of Mozy, CrashPlan+ and Pro, Backblaze and Carbonite, but each have their problems: Mozy seems overly expenvice per gig at 50C Crashplan wont sell to me since i am outside the US (they hide it on their site... hidden in the FAQ section!) Backblaze dont support Windows Server Carbonite business pricing is $600 up front for 500Gb of storage... Fro $229, they will not backup Windows Servers. So, other than those, Jungle Disk (at 15c per Gig) or ZManda (also at 15c per Gig) what other options are there? what are other people using?

  Read the article

• Custom HTTP Status Codes (a la Twitter 420: Enhance Your Calm) [migrated]

  - by Max Bucknell

  I'm currently implementing an HTTP API, my first ever. I've been spending a lot of time looking at the Wikipedia page for HTTP status codes, because I'm determined to implement the right codes for the right situations. Listed on that page is a code with number 420, which is a custom code that Twitter used to use for rate limiting. There is already a code for rate limiting, though. It's 429. This led me to wonder why they would set a custom one, when there is already a use case. Is that just being cute? And if so, then which circumstances would make it acceptable to return a different status code, and what, if any problems may clients have with it? I read somewhere that Mozilla doesn't implement the joke 418: I’m a teapot response, which makes me think that clients choose which status codes they implement. If that's true, then I can imagine Twitter's funny little enhance your calm code being problematic. Unless I'm mistaken, and we can appropriate any code number to mean whatever we like, and that only convention dictates that 404 means not found, and 429 means take it easy.

  Read the article

• How-To Configure Weblogic, Agile PLM and an F5 LTM

  - by Brian Dunbar

  Agile, Weblogic, and an F5 walk into a bar ... I've got this Agile PLM v 9.3 Running on WebLogic, two managed servers. An F5 BigIP LTM. We're upgrading from Agile v 9.2.1.4 running on OAS. The problem is that while the Windows client works fine the Java client does not. My setup is identical to one outlined in F5's doc: http://www.f5.com/pdf/deployment-guides/bea-bigip45-dg.pdf When I launch the java client it returns this error "Server is not valid or is unavailable." Oracle claims Agile PLM is setup correctly, but won't comment on the specifics of the load balancer. F5 reports the configuration is correct but can't comment on the specifics of the application. I am merely the guy in a vortex of finger-pointing who wants my application to work. It's that or give up on WLS and move back to OAS. Which has it's own problems but at least we know how it works. Any ideas?

  Read the article

• how to correctly mount fat32 partition in Ubuntu in order to preserve case

  - by Dean

  I've found there are couple of problems might be related how my FAT32 partition was mounted. I hope you can help me to solve the problem. I also included the command I used to help others when they find this post, sorry to those might feel I should use less space. I've the following file structures on my disk dean@notebook:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x08860886 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS In the etc/fstab I've got UUID=91c57a65-dc53-476b-b219-28dac3682d31 / ext4 defaults 0 1 UUID=BEA2A8AFA2A86D99 /media/NTFS ntfs-3g quiet,defaults,locale=en_US.utf8,umask=0 0 0 UUID=0C0C-9BB3 /media/FAT32 vfat user,auto,utf8,fmask=0111,dmask=0000,uid=1000 0 0 /dev/sda5 swap swap sw 0 0 /dev/sda1 /media/sda1 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 /dev/sda2 /media/sda2 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 I checked my id using id and I've got dean@notebook:~$ id uid=1000(dean) gid=1000(dean) groups=4(adm),20(dialout),24(cdrom),46(plugdev),103(fuse),104(lpadmin),115(admin),120(sambashare),1000(dean) I don't know why with these settings I still have problem of using svn like in this one Thank you for your help!

  Read the article

• Windows 7 Can't Connect to Network Drive on Windows XP

  - by Alex Yan

  I have a Windows XP desktop and a Windows 7 laptop both connected to a TrendNET TEW-432BRP router, which is connected to the Internet. They both have static IPs. The desktop has an external hard drive connected to it. The laptop is wireless and the desktop is wired. I enabled sharing on the external hard drive about two years ago when I bought it. I mapped it as a network drive on the laptop. I think it was yesterday, the laptop just stopped recognizing any of the computers on my network (When I open network, my laptop's the only one on it). I also get an error message "An error occurred while connecting A: to \CERTIFIED-DATA\Expansion Microsoft Windows Network: The network path was not found. The connection has not been restored" when I try to connect to the network drive. Both computers run Avast, and there hasn't been any problems with it. This has happened before but I never figured out why and how to fix it. It's usually fixed when I reinstall the OS of the affected system. Edit: I can't navigate the computer using \\CERTIFIED-DATA. I get a message saying "Windows cannot access \CERTIFIED-DATA. Check the spelling of the name, Otherwise, there might be a problem with your network" I clicked diagnose on the message and it failed to find anything wrong I clicked diagnose on my wireless connection, and it just keeps trying to check if something is wrong with the connection I can ping it successfully

  Read the article

• sendmail relay status

  - by Andy

  Hello all, I have a RHEL3 server with sendmail configured to relay mail to: # "Smart" relay host (may be null) DSmailrelay This relay server is an exchange server not administered by me. A few days ago its IP address was changed without my knowledge so I've updated the correct ip in /etc/hosts for the mail relay entry. Unfortunately no mail is currently going through and maillog reports: Oct 26 14:32:39 fsimag sendmail[12580]: n9Q3VxPA012580: from=root, size=3685, class=0, nrcpts=1, msgid=<~R.*.2009102614315955@*>, relay=root@localhost Oct 26 14:32:39 fsimag sendmail[12580]: n9Q3VxPA012580: to=wodwest@*.net, delay=00:00:40, mailer=esmtp, pri=33685, dsn=4.4.3, stat=queued Oct 26 14:36:09 fsimag sendmail[13670]: n9Q3ZTcf013670: from=root, size=5831, class=0, nrcpts=1, msgid=<~R.medicus.2009102614352914@*>, relay=root@localhost Oct 26 14:36:09 fsimag sendmail[13670]: n9Q3ZTcf013670: to=tsgastro@(.net, delay=00:00:40, mailer=esmtp, pri=35831, dsn=4.4.3, stat=queued Oct 26 14:36:50 fsimag sendmail[13882]: n9Q3aAxj013882: from=root, size=5830, class=0, nrcpts=1, msgid=<~C.medicus.2009102614361009@*>, relay=root@localhost Oct 26 14:36:50 fsimag sendmail[13882]: n9Q3aAxj013882: to=elmwood@*.net, delay=00:00:40, mailer=esmtp, pri=35830, dsn=4.4.3, stat=queued (With domains obscured) The mailq command shows nothing, and I've also tried connecting to this new mail server via telnet and manually sending and reports as being queued but not sent. The administrator of this machine has put it back to me saying he sees no problems, and I just want to cover everything before passing it back to him. Is there any other tests/logs/reasons for sendmail to only report it as "stat=queued" ? I've looked in previous logs and the relay is set to root@localhost in those but none were ever set to queued. Thanks for any help, Andy

  Read the article

• Computer turns off unexpectedly

  - by Shahar

  My computer turns itself off unexpectedly after some time of use. It appears that this might be temperature related, but not for sure. I installed 2 tools that monitor temperature: SpeedFan and CPU Thermometer. The only definite finding is that there is a sensor (labelled temp1 in SpeedFan and CPU in CPU thermometer), which shows a temperature of 108C a second before the computer powers down. Until that moment, this sensor shows a constant temperature of 40C. I can usually reproduce the shutdown by viewing a few movies together, which cause another sensor (labelled CPU in SpeedFan) to go up to 60sC, but I do experience the problem even at times when this sensor remains low and cool. It does seem that the problem is more frequent if the computer is turned back on immediately after shutdown, but not always. I have had other hardware problems recently, which might be related: My hard disk heated up. I installed a fan on it, which worked to reduce the heat. The hard disk sensor shows around 40C. I had occasional blue screens and hard disk failures. Replacing the power supply seems to solve both these issues, but then this powerdown problem began appearing. I would appreciate any suggestions as to how to determine where the fault is, or what needs to be replaced.

  Read the article

• Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

  - by Holocryptic

  I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

  Read the article

• Networking Problem MrxSmb event 50 "Delayed Write Failed" errors occurring all of the sudden

  - by Johnny Musso

  JUST THIS MONTH, we have started getting reports from a number of very stable clients that MrxSmb event id 50 errors keep appearing in their system event logs. Otherwise, they do not appear to have any networking problems except that there is a critical legacy application which seems to either be generating the MrxSmb errors or having errors occur because of them. The legacy application is comprised of 16 bit and 32 bit code and has not been changed or recompiled in many years. It has always been stable on Windows XP systems. The customers that have the problem usually have a small (5 clients or less) peer to peer network with all Windows XP systems. All service packs are loaded on the XP machines. Note: The only thing that seems to correct the problem is disabling opportunistic locking. I don't like this solution because it seems to slow down the network and sometimes causes record locking issues between users (on some networks). Also, this seems to have just started happening - as if a Windows update for XP has caused it? However, I have removed recent updates and it did not correct the issue. Thanks in advance for any help you can provide.

  Read the article

• MSDTC - Communication with the underlying transaction manager has failed (Firewall open, MSDTC network access on)

  - by SocialAddict

  I'm having problems with my ASP.NET web forms system. It worked on our test server but now we are putting it live one of the servers is within a DMZ and the SQL server is outside of that (on our network still though - although a different subnet) I have open up the firewall completely between these two boxes to see if that was the issue and it still gives the error message "Communication with the underlying transaction manager has failed" whenever we try and use the "TransactionScope". We can access the data for retrieval it's just transactions that break it. We have also used msdtc ping to test the connection and with the amendments on the firewall that pings successfully, but the same error occurs! How do i resolve this error? Any help would be great as we have a system to go live today. Panic :) Edit: I have created a more straightforward test page with a transaction as below and this works fine. Could a nested transaction cause this kind of error and if so why would this only cause an issue when using a live box in a dmz with a firewall? AuditRepository auditRepository = new AuditRepository(); try { using (TransactionScope scope = new TransactionScope()) { auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#1", 1); auditRepository.Save(); auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#2", 1); auditRepository.Save(); scope.Complete(); } } catch (Exception ex) { Response.Write("Test Error For Transaction: " + ex.Message + "<br />" + ex.StackTrace); }

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Exchange 2003 ActiveSync problem

  - by colemanm

  We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

  Read the article

• Windows Bluescreen - atikmpag.sys

  - by Mochan

  Information Name: atikmpag.sys bluescreen (BSOD or BlueScreen of Death) Error code: 0x00000116 Appears when: Playing games, watching videos Can be reproduced: Yes Cause: Graphics Card is the main assumption System Specifications Before we begin - I will inform you of my specifications. OS: Windows 7 x64 Home Edition Model: Dell Inspiron 15R Special Edition (aka Inspiron 7520) (Add 2GB of RAM to the model linked) Hard Drive: 1TB CPU: Intel Quad-Core i7 Sandy Bridge (I think) Processor at 2.10GHz (I think it can be clocked to 3GHz?) RAM: 6GB (I think 1 x 4GB and 1 x 2GB) Display: 15.6" HD (1366x768) Graphics: AMD Radeon HD 7500M 2GB Details So now that you know some basics about my computer, I'll get to the problem. Being an Ubuntu user I hardly use Windows, but occasionally I do. Like to run Skyrim and other games incompatible with Linux and WINE. The new Sims 3 Seasons patch is also now not supported. When playing these two games and other ones, theoretically. I have also heard others saying that while watching HD movies and video series it also happens. While watching the bluescreen as it happens, I see it is the 'atikmpag.sys' error. I have not installed much and nothing significant. I think I have downloaded Skyrim, Firefox and The Sims 3. I haven't done much more... since Ubuntu is definitely the best in comparison! (No hate, just a joke :P). I can reproduce it easily (just by running a game for less than a minute). It is always there each time, but it's never at a specific time or anything. So far I have found that it may be caused by lack of power to the graphics card, or it may be damaged or fried. Since I've had the computer for a mere 4 months (and have had other problems with it also). I have contacted Dell but they are useless beyond belief. Anyone with any information, solutions or details are encouraged to share your knowledge, as it would be immensely appreciated.

  Read the article

• Windows 7 machine, can't connect remotely until after ping

  - by rjohnston

  I have a Windows 7 (Home Premium) machine that doubles as a media centre and subversion server. There's a couple of problems with this setup, when connecting to the server from an XP (SP3) machine: Firstly, the machine won't respond to it's machine name until after it's IP address has been pinged. Here's an example: Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Rob>ping damascus Ping request could not find host damascus. Please check the name and try again. C:\Documents and Settings\Rob>ping 192.168.1.17 Pinging 192.168.1.17 with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time=2ms TTL=128 ... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 2ms, Average = 1ms C:\Documents and Settings\Rob>ping damascus Pinging damascus [192.168.1.17] with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time<1ms TTL=128 .... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\Documents and Settings\Rob> Likewise, subversion commands with either the machine name or IP address will fail until the machine's IP address is pinged. Occasionally, the machine won't respond to pings on it's IP address, it'll just come back with "Request timed out". The svn server is VisualSVN, if that helps... Any ideas?

  Read the article

• VPN being blocked somewhere between either my BT2700HGV and DLink DFL-210

  - by Dom

  Hi, For some time I have been unable to get VPN working through my set up. I have a BT2700HGV Router (2 Wire Model) and as a firewall I have the Dlink DFL-210. You can't turn the firewall completely off on the BT2700HGV so I have it set to DMZplus mode for the Firewall. In theory this should then allow the VPN ports through. On the Firewall I have a series of rules set up and one is the pptp-allow rule which should allow access on the correct ports also. When I try to connect via VPN however the client machine gets an error 809. If I check the log on the Dlink firewall, I see this record: http://dl.dropbox.com/u/1041315/packetdrop.PNG The laptop I am testing the vpn with is connected directly to the BT2700HGV router and I am trying to VPN from it onto 81.138.86.217. I can't work out whether I have some sort of problem in the set up of the rules on my firewall or if the BT router (even though it's in DMZplus mode) is still blocking port 1723. I read somewhere that there where problems because BTs Openzone held onto this port for some reason. Any help would be greatly appreciated. If you need further screen shots or information then please let me know. I wasn't able to create new tags for the router and firewall name or insert the picture in as I am new to the forum. Dom :-)

  Read the article

• Web Server Routing Based On Location

  - by Eric

  I have a website that has users from both Hong Kong and Australia. Unfortunately, since the server is located in Australia, users from Hong Kong are going to suffer latency problems. Traffic has to go through US before travelling back to Australia. So I've setup a server in Hong Kong as well, and users using the .hk TLD are going to be redirected to the Hong Kong web server. It shares the same database server with the Australian server but due to aggressive SQL query caching, impact on performance from latency from SQL queries are negligible. But for users accustomed to the Hong Kong website but have since traveled to Australia, they suffer from additional latency because they go to the .hk site which redirects to the HK server even when they're in Australia. The website is targeted at international students from Hong Kong so this is an significant issue for me. Instead of redirecting users to the closest web server based on the TLD, how do I redirect users based on their location? Currently I am using nginx, postgres and Django. Say I know how to estimate users' location based on users' IP addresses, what is my next step? At what level would I work on? What topic should I read up?

  Read the article

• Updating modules on VPS hosted under OpenVZ

  - by tertle

  Been trying to install OpenVPN on a VPS but come into a few problems when trying to start the openvpn server: Service deferred error: IPTablesServiceBase: failed to run iptables-restore [status=1]: ['FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'iptables-restore: line 46 failed']: internet/base:1175,internet/base:752,internet/process:45,internet/process:306,internet/_baseprocess:48,internet/process:775,internet/_baseprocess:60,svc/pp:116,svc/svcnotify:26,internet/defer:238,internet/defer:307,internet/defer:323,sagent/ipts:105,sagent/ipts:39,util/error:52,util/error:32 service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['iptables_openvpn']) Anyway so after a bit of playing around and some advice, I found that the Linux kernel and modules don't match on my server. uname -r returns 2.6.18-028stab070.14 and ls /lib/modules returns 2.6.18-028stab070.7 The server is running OpenVZ and my container uses Ubuntu 9.10. So my question is, is it possible for me to update my modules on a VPS and if so how would I do this, or is this something I'll need to try get my host to do? Thanks in advance.

  Read the article

• Windows 8 - no internet connetction to some hosts while VPN is active

  - by HTD

  I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

  Read the article

• Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

  - by david

  I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >