Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 438/624 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

• Why are SMART error rates going down?

  - by Jeff Shattock

  I have a hard drive that's part of a Linux software raid5 array. SMART has reported that its multi_zone_error_rate was 0, then 1, then 3. So I figured I better start backing up more frequently and prepare to replace the drive. Now, today, the multi_zone_error_rate of that very same drive is back down to 1. It seems that 2 errors unhappened while I wasn't looking. I've also seen simliar behaviour by inspecting the syslog on the server. Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 8 02:31:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 These are raw values, not the human-useful values that smartctl -a produces, but the behaviour is similar: error rates changing, then undoing the change. None of these are the drive that had the multi_zone weirdness. I haven't seen any problems from the RAID; its most recent scrub ( < 24 hours ago) came back totally clean. The only thing I can think of is that the SMART reporting circuitry on the drive isn't working properly all the time. The cables are in tight on the drive and board. What's going on here?

  Read the article

• Need Info on the Hidden Switch in SET - "/S" How to implement

  - by ttyl

  I am having some problems doing a proper search of "SET/S" or "SET /S" on google and other search providers. The difficulty arises with the SLASH "/", it is commonly used in search engines to add a "nearness" to the search parameter. I have found no way to escape the SLASH when searching for a SLASH. For those on this community, try searching this domain with the two search terms listed above. It just doesn't work, it ends up looking for SET S instead. But I digress. So Im asking the uber-guru's on this board to help me find out about the documentation of /S and how to implement SET /S in a batch file. SET is an internal DOS/cmd commandand allows many things incuding prompting the user, integer math and writing environment strings. in looking at this link: http://www.robvanderwoude.com/os2set.php it appears that the /S is only for OS2 but im thinking that this might not be the case, due to this: http://www.dostips.com/forum/viewtopic.php?t=2704, apparently used with substings and macros. any help is much appreciated

  Read the article

• arp requests are sent continuously and my linux machine disconnected to the world

  - by sees

  I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

  Read the article

• How to set up a VPN Incoming connection with Windows to tunnel Internet traffic?

  - by Mehrdad

  I want to set up a VPN on a remote server to route all my Internet traffic for privacy reasons. I can set up an incoming connection and connect to it successfully. The problem is, I can just see the remote computer and no other Web sites will open. I want the remote server to act like a NAT. How can I do that? Note that I don't want to split Internet traffic. I actually want to send all the traffic to the remote server but need to make it relay the traffic. For the record, my remote server is Windows Web Server 2008 which does not have routing and remote access service. Clarification I'm mostly interested in server configuration. I don't have any problems configuring the client. By the way, Windows Web Server 2008 seems to have the same VPN features built in client OSes (like Vista) and specifically, it doesn't include the RRAS console in MMC. I'm also open to suggestions regarding third party PPTP/L2TP daemons available, if they are free.

  Read the article

• Dante (SOCKS server) not working

  - by gregmac

  I'm trying to set up a SOCKS proxy using dante for testing purposes. However, I can't even get it to work with a web browser, after looking at several tutorials on how to do that. I've tried in both IE and Firefox, in both cases, using "Manual proxy configuration", leave everything blank except for SOCKS host, and then put in the IP of my proxy and the port number (1080). I just get "Server not found" / "Problems loading this page" and don't see anything in danted, even running in debug mode. If I do a "telnet 10.0.0.40 1080" I do see the connection open in danted debug output, so I know that much is working. Here's my config: logoutput: stdout /var/log/danted/danted.log internal: eth0 port = 1080 external: eth0 method: username none #rfc931 user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody connecttimeout: 30 # on a lan, this should be enough if method is "none". client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client pass { from: 127.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } block { from: 0.0.0.0/0 to: 127.0.0.0/8 log: connect error } pass { from: 10.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } pass { from: 127.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } I'm sure I'm probably missing something simple, but I'm lost. I haven't even thought about SOCKS since the late 90's.

  Read the article

• Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

  - by royatl

  My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

  Read the article

• CIFS mounted drive setting "stick-bit" on all files, cannot change permissions or modify files

  - by mattmcmanus

  I have a folder mounted on an Ubuntu 8.10 sever through cifs that I simply cannot change the permissions on once mounted. Here is a breakdown of what's going on: All files within the mounted folder automatically have their permissions set to -rwxrwSrwx regardless of whether the file is create on the windows server or on the linux machine. I have the same directory mounted on two other linux servers (both running 9.10 instead of 8.10) with no problems at all. They all are using the same fstab options and the same credentials. //server/folder /media/backups cifs credentials=/etc/samba/.arcadia_cred,noexec,noserverino 0 0 I've I run a chmod command a million different ways, all of which report successfully changing the permissions. However it doesn't. The issue began after I updated from 8.04 to 8.10 Any idea why this may be happening on one machine? Since it started after an upgrade I'm not sure what is the bes thing to do. Any help you could give would great! None of my automated backup scripts are working because of this!

  Read the article

• Site to Site VPN problem, connection succesful data only oneway?

  - by Charles

  To start things off, I'm not the actual Administrator for the VPN Server, but he is also at a loss so I thought I'd ask it here. I know it's a Cisco ASA Firewall/VPN. I have a router that connects to the Cisco VPN server, it does so succesfully. I can ping everything within the remote network and from the remote network into my own. I've been able to SSH into a remote server over VPN as well, it all seems to work; until there's some more data returned. A quick example would be an internal webserver. The default homepage simply redirects, so only sends back HTTP headers with a "Location:". I receive this on my computer, but when I request the actual page then (which isn't that big) I don't get a response at all - it just stalls. And it does this for other services as well, for example SSH. I can do a couple of things while connected, but if there's more than xx output it seems to do nothing. The connection remains active throughout all of this. Has anyone ever experienced anything like this before / know what the problem might be? Another user who has a site-to-site connection with this VPN using the -exact same setup- has no problems, the only difference is that I have around 200ms ping to the VPN server/network because of a very long distance (other continent).

  Read the article

• Ubuntu 11.10 ATI Drivers vesa park

  - by Matthias

  This is probably not an issue, from all I can get it seems my hardware and drivers are properly installed. However when I go to system settings - system info - graphics. I get Driver: VESA:PARK. Experience: Standard. my graphics card is a: Ati Mobility Radeon HD 5470 512MB. I am pretty sure it's not a same-die GPU since there is a fan exhaust at the side of my laptop which I presume is the exhaust for the GPU... I have no clue whatsoever what this means. I installed the ati drivers first using the 'additional drivers' method. However I also decided to look a manual installation up via the terminal since I've had problems before with Ubuntu and ati cards. I used wget and something among the lines of sh dpkg -i. I can recall exactly, I took them from another stackoverflow answer. Anyway, it seems everything is installed properly since it shows up with these commands: sudo lshw -C video fglrxinfo however the first command seems to detect hardware, not the driver per se, although the driver is probably needed to detect the hardware anyway which would indicate its properly installed. I am still not sure about that VES:PARK thing though. I'd like to know what it means.. Also, if someone happens to know a good way of testing if the gpu is connected/being used...some sort of benchmark maybe...I'd like to hear it. P.s. I can find my way around in Ubuntu but I would probably still be considered a rookie by more experienced users.

  Read the article

• Updating a backup image (.wim and/or Acronis .tib)

  - by Backdraft

  Anyways, I've got a Windows 7 installation that I want to make a generalized backup image of so I can use it for future installs on not only my desktop from which the image is to be derived from, but also other systems with dissimilar hardware. Therefore I've arrived at either 2 options, using either sysprep/imagx from WAIK (guide here), or the simpler Acronis True Image w/ their Universal Restore addon. Of course, they create distinct image file types, .wim and .tib respectively. What I'd like to do is to periodically update this image, say with Windows Updates, by booting it to either a physical partition or using virtualization (VirtualBox/VMWare), perform the updates, and save the updated .wim or .tib image file again. What's the simplest way I could do this? Another question is, I created this generalized backup image on a 500GB Seagate 7200RPM HDD. Say I get an SSD as an OS drive in the future, can I just deploy this backup image to the SSD normally, or are there any potential problems to be aware/avoid (ie. is it best to completely reinstall the OS on the SSD from scratch, or can I use the image created on the normal HDD with no issue)? Thanks and Happy Holidays.

  Read the article

• Install IIS on Server 2003 unattended via PowerShell as a service user (no terminal session)

  - by maik

  I've been racking my brain with this for a bit and figured I would ask here to see if anyone could enlighten me. As the title says, I'm trying to install the IIS role on Server 2003 using an unattended install method launched via a service. We're using RightScale and most of what we want to accomplish is pretty straightforward. I created an unattend file for use with sysocmgr.exe: [Components] iis_common = ON iis_www = ON iis_www_vdir_scripts = ON iis_inetmgr = ON fp_extensions = ON iis_ftp = ON And I invoke it like so: sysocmgr.exe /i:%windir%\inf\sysoc.inf /u:C:\path\to\iis-unattend.txt /r /x /q If I run that from a command prompt while logged in as Administrator it works just fine, but if it runs via RightScript (the RightScale user on the server, which is a local admin) it fails somewhere in the middle and the logs I get are rather unhelpful. The thing is I can do this same thing with the SNMP Client (which is a Windows component, not a server role) and it works with no problems while run via the script service user. My best guess is that sysocmgr.exe is expecting a GUI element to be there during the role installation and since the service user has no terminal session it coughs and dies. That's just a wild stab in the dark.

  Read the article

• Exchange server intermittently not receiving or delivering emails to a few addresses?

  - by Gary Willoughby

  This is a strange problem. We are using an Exchange 2007 server to handle the emails to and from the company. There are two main problems which are probably related. None of our mails sent to one single customer are ever received. When we send any type of mail to one particular customer, they never get it. We have confirmed the address and tried to send more to other mail addresses on the same domain and they still don't receive it. No error (email or otherwise) is ever issued. (Domain related? Blacklisted?) Sometimes (intermittently) a mail sent to our company (can be any address on our domain) is never received. I tried this the other day from home and sent a mail to my work address. It was never received. But then a day later i sent another and it was received fine (so the mail address is fine). No error (email or otherwise) is ever issued. Any ideas where to start looking for causes?

  Read the article

• nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

  - by user167328

  I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

  Read the article

• Snow Leopard takes a long time to connect to Windows/Samba server

  - by hood

  We run a very heterogeneous network here: There is some XP, Vista, 7, Leopard, Snow Leopard clients, and Windows 2003 (one remaining legacy app), 2008, and Linux servers. The main file server runs Ubuntu Linux and has been added to the Windows Domain and has been used for many years; SBS 2008 is the PDC (the 2003 and 2008 are on the domain also). In Leopard there were no problems at all authenticating to the file servers. We've upgraded one of the Leopard iMacs to Snow Leopard, though the same problem occurs in a new MBP which came with the newer OS as well as a clean install on another iMac. It does not matter whether connected through wired or wireless. In the Finder when clicking on the server - whether on first boot or after it is connected - it will display "Connecting..." for up to a few minutes before either generally working (if username/password in keychain) or displaying "Connection Failed" - at which time clicking "Connect As" and typing in the username/password will take some more time and eventually work. Sometimes it will display "Connecting..." indefinitely. (I've left it as long as 15 minutes before trying something else) Accessing shares on the the 2003 and SBS servers have the problem (so I don't think it's a Samba server issue). The Server 2008 Standard is connecting instantly at the moment. Accessing the share through an alias/stacks doesn't have this problem. Leopard and Windows clients still have no problem. I've searched Google but hasn't yielded any working result. How do I get rid of this delay?

  Read the article

• Adding a Second Wireless Router to an Existing Wired Network

  - by KVCrawford

  I apologize ahead of time, I know this has been asked before, but I'm still having problems...maybe you guys can help. I started out with the basic instructions from the highest-voted answer at http://serverfault.com/questions/41572/adding-a-second-wireless-router-to-my-network The new Wireless router in question is a Linksys Wireless-N Gigabit Router, Model # WRT310N Here are the steps I've taken in setting it up: Plug my laptop into LAN port #2 in the new router. Nothing else is connected at this point Configure the new router to be 192.168.1.200 (the original router is 192.168.1.1, and its DHCP clients are from 192.168.1.100-x.x.x.199) Set the internet connection on the new router to "DHCP Client" Turn off the DHCP server & NAT routing on the new router Plug in a LAN cable from the original router into the LAN port #1 on the new router (NOT the WAN port, nothing is plugged in there) Reset the new router Afterwards, I try to ping 192.168.1.1 from the laptop plugged into LAN port #2 on the new router, with no response. 192.168.1.200 garners no response either. Typing "ipconfig" tells me: Autoconfiguration IP Address: 169.254.198.113 Subnet Mask: 255.255.0.0 Default Gateway: 169.254.198.113 What's going wrong? I appreciate any help!

  Read the article

• Mustek 1200 CP driver SFC4.SYS bluescreens with BAD_POOL_HEADER

  - by Slink84

  I have Windows XP SP2. Recently it started bluescreening right after starting up with 'BAD_POOL_HEADER', 0x00000019 error caused by SFC4.SYS driver. After googling for a while I've found out that this is my Mustek's 1200 CP scanner driver. Booting in safe mode and uninstalling it solved the problem... And created another one: now I can't use my scanner. The weird thing is, that it has been working for a while on this PC without any problems. It all started suddenly, and I can't remember installing anything that might have affected it. Reverting to several earlier system restore points didn't help. I've tried re-installing it from the Mustek website, just in case if my copy got corrupted or infected by a virus, but it did not help - it still bluescreens. Also, I've installed Avast and scanned my PC - there were no viruses found. If anyone had such a problem before or has an idea what might have caused it, please help. ED: @Michael Todd: ...try installing on another PC... I've installed it on my friends PC. He has the same OS version, with the latest updates just like mine (he wasn't too happy, even after I've assured him that it is easy to fix by uninstalling that driver :] ). It worked fine - no bluescreens or whatsoever. So I think I've narrowed it down to either BIOS settings, or some wicked driver conflict. Next thing I'm going to try is to re-install XP, or install windows 7. I'm not too happy with a prospect of mucking about with BIOS settings...

  Read the article

• Ubuntu: unattended-upgrades from a local package archive

  - by Novelocrat

  I have a local apt archive with a bunch of packages I built in it. The Packages and Release file are generated by apt-ftparchive. The Release file looks like Date: Thu, 06 May 2010 23:04:33 UTC Label: PPL Origin: PPL Suite: ppl MD5Sum: ebec3527ebc8351468b2ef8796c19855 37325 Packages d41d8cd98f00b204e9800998ecf8427e 0 Release SHA1: a0593b663d77fde88ee35b56ae1f3c17801cfe99 37325 Packages da39a3ee5e6b4b0d3255bfef95601890afd80709 0 Release SHA256: dd73a02846aee111cac58a869c6bf650886632ba82c2172ffddd81aa4429981c 37325 Packages e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 0 Release I'm using unattended-upgrades to keep the machines in the lab up to date on security and bug fixes, but I'm finding that it doesn't pull from my local archive. The configuration file for it looks like // Automaticall upgrade packages from these (origin, archive) pairs Unattended-Upgrade::Allowed-Origins { "Ubuntu hardy-security"; "Ubuntu hardy-updates"; "PPL ppl"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. The package 'mailx' // must be installed or anything that provides /usr/bin/mail. //Unattended-Upgrade::Mail "root@localhost"; Yet, when I run sudo unattended-upgrade on one of these machines, newer package versions don't get installed. Can anyone point out what I'm getting wrong?

  Read the article

• After update to Windows 8.1 brigthness isn't working (changing)

  - by Bibo

  I just update my Windows 8 to Windows 8.1 by Windows Store and I have some problems. My notebook is Acer Aspire Timelinex 3820TG and I know it's little old for Windows 8 but I install them and works fine (I updated my HDD to SSD). Now I just updated Windows and I have problem with changing brightness on my dedicated graphic card (Ati HD 5650). First I can changing brigthness with fn + keys but It just changing level in OS. No change in real. I tried reinstall drivers, install drivers for my card from Acer with compatibility to Windows 7 and without change. When I switch to integrated card changing brightness works. I think the problem is with drivers but I don't know how to get it working. Thanks for help Bonus question: I have another problem (but this one is not so important). Does anyone knows what msietxghh.exe is doing? Everytime when my system runs (after update) I get message that this program stops working but I just cancel and looks everything works fine.

  Read the article

• MySQL not releasing temp file descriptors

  - by Wakaru44

  Since a few days ago, we’ve been experiencing some serious problems with our MySQL installation: MySQL keeps opening temporal files (normal behaviour) but these files are never released. The consequence is that, eventually, the disk space is exhausted and we have to restart the service and clean up /tmp manually. Using lsof, we see something like this: mysqld 16866 mysql 5u REG 8,3 0 692 /tmp/ibyWJylQ (deleted) mysqld 16866 mysql 6u REG 8,3 0 707 /tmp/ibf5adsT (deleted) mysqld 16866 mysql 7u REG 8,3 0 728 /tmp/ibGjPRyW (deleted) mysqld 16866 mysql 8u REG 8,3 0 5678 /tmp/ibMQDLMZ (deleted) mysqld 16866 mysql 13u REG 8,3 0 5679 /tmp/ibQAnM42 (deleted) Maybe it's not related, but when we shutdown the server, the files are finally freed, and we can see the following warnings in the MySQL log: 121029 7:44:27 [Warning] /usr/local/mysql/bin/mysqld: Forcing close of thread 1333 user: 'xxx' 121029 7:44:27 [Warning] /usr/local/mysql/bin/mysqld: Forcing close of thread 1156 user: 'yyy' 121029 7:44:27 [Warning] /usr/local/mysql/bin/mysqld: Forcing close of thread 1151 user: 'zzz' where 'xxx', 'yyy' and 'zzz' are distinct mysql users (and the only 3 users with active connections to the database). We have a few theories: There is a problem in the OS, that keeps file handlers open. Could it be possible that the OS "delete" operation blocks the threads until shutdown? This may explain the warning at shutdown and the fact that files are finally deleted when the process dies. Until now, data sets were so small that temp files were relatively small and there was enough time to release the file handles without exhausting disk space. We are using Mysql 5.5 on a RHEL 6.2 with the default kernel.

  Read the article

• Multi-IP address zimbra server DNS PTR records and spam

  - by David Fraser

  We have a mail server running Zimbra (ZCS 6.0.8). The server has 5 active public IP addresses in the same subnet. (.226-.230). I currently have A records for each of these (host0.domain.com..host4.domain.com), with the main host.domain.com of the machine pointing to .226. Our host has ended up being listed on the SORBS DUHL list (even though it's in a server farm). According to them you can get removed quickly by checking that your host has an MX record, an A record, and a PTR record that points back to the hostname given in the MX record. I tried setting the PTR records so that each of these addresses resolved back to their A record (i.e. .228 had a PTR to host2.domain.com). However, I then got mail being rejected from other servers because when Postfix (under Zimbra control) sends out mail, it uses the main hostname for the HELO - there doesn't seem to be any way to override it. So the PTR records currently say host.domain.com for all 5 IP addresses. What's the correct way to handle this? Should I have an A record for the domain that points to all the IP addresses (for round-robin handling)? I'm nervous of changes that could cause problems, so I'm wondering what the standard way to handle a multiple-IP-address mail server is.

  Read the article

• Fix MBR from installed Windows Vista

  - by Danilo

  Hi guys, I have a quite strange problem. I had a system with Vista and Ubuntu installed. We always use Vista and Ubuntu was something we really did not need. BUT: to boot, GRUB was used (I guess grub2). Now, while being in Vista I cancelled the Ubuntu partition and with it also GRUB. Now the system does not boot anymore. I tried to reinstall Ubuntu, but I had some problems with the CD. At the moment, when the system boots I get into the GRUB shell. From there, I am able to boot Windows Vista with some commands like this ones: grub> title windows rootnoverify (hd0,msdos3) chainloader +1 boot Now the question is: if I am able to boot in Windows Vista with this trick, is it possible to fix the MBR from inside the installed windows Vista with some command/tool of Vista itself? I shall probably mention that we are not interested in double boot at the moment. We only want Vista to start. I can sum up the question like this: is there a way to fix the MBR from the installed version on Windows Vista, considering that GRUB is at the moment installed? I hope I was clear enough. Thanks for your help.

  Read the article

• network latency, TCP and UDP packets

  - by user115848

  Hello recently my network has started to cause me lots of problems. I have a cable modem, connected to a tp-link router (with some port forwarding). Everything was working fine then i started to get lots of udp (port 53) "UNREPLIED" logs in the router. Now there are tcp UNREPLIED logs too. This is causing lots of latency and failed connections when trying to connect to different internet sites. Also, we run an openfire server for spark connections, and I believe its causing connectivity issues for some users who are trying to connect using Spark (some people connect fine, others don't). Please see screen shot below for packet logs. It has to be something internally, as I connected straight to the comcast modem and i was able to connect to the internet and various sites as normal. I tried to swap out the router with a different and got the same issue. I scanned both my internal dns servers for viruses or malware and it came up empty. Another anomaly is that when i try to connect to www.cnn.com, i get redirected to the different site. I scanned my own machine for hijacks. Not sure if this is related to the networking issue. Please let me know if you have any ideas for troubleshooting.

  Read the article

• vmware vmdk disk problem

  - by dmtr

  Hello, I have a vmware esxi 4 server and 2 storage servers (mount as nfs). Between the storage servers (fedora 14) is made drbd cluster (dual primary) and ocfs2 filesystem, also every server has local partition with ext4 filesystem, both are mounted as nfs on esxi server. When i tried to copy a virtual machine (naturally it power off) files from ext4 partition to ocfs2 partition, vmdk total file size is different, but md5sum is the same. on ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 on ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When i power on the virtual machine from ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after windows logo. From ext4 partition the virtual machine is worked. Test with linux (create and install on ext4 partition and copy) the same problem appears. When i create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and i have the same problem. Any suggestions ?

  Read the article

• repair partition table

  - by m.sr

  Hallo. I've just overwritten my partition table of my system's hard disk. i made a cfdisk on the wrong device (/dev/sda instead of /dev/sdd), deleted all partitions, made one new primary spanning over the whole device, set its type to 07 (NTFS) and hit write. So here i am with my system running. Until i reboot, i hope/guess nothing will change - meaning: all my data is accessible (I'm currently making a dd-backup of the whole device and plan to make a .tar.gz-backup of the most important data later). I also backed up /proc/partitions, /proc/diskstats (even though i guess this is more about throughput and stuff like this ...) and /sys/block/sda/sda?/{start,size}. Some further things i know: 4 primary partitions 1st partition: ~100Mb, ext3, /boot 2nd partition: ~100Mb, "Win7 Boot Partition", ntfs(?) 3rd partition: ~20...30GB, Win7, ntfs 4th partition: ~20...30GB, luks-encrypted device The luks- de crypted device is a LVM-PV The /, /home & swap-partitions are all LVs on the (VG on the) above noted PV So my questions: What is the simplest way to just write the kernels partition table to the disk? What is the simplest way to take the above mentioned (and perhaps other I don't know of ...) data and generate the partition table? Are there any problems to take care of regarding to luks and/or lvm? Is there any data I should backup before rebooting (meanig stuff from kernel [ /sys/..., /proc/...] and so on, which could help me regenerate the partition table)? Thanks a lot! P.S.: debian sid, Kernel 2.6.34-1-amd64 from debian-experimental, 80GB Intel SSD

  Read the article

• Can't set screen brightness in Gentoo system

  - by Real Yang

  My system: Linux gentoo 3.10.7-gentoo-r1 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 240M] (rev a2) output of xbacklight: No outputs have backlight property output of xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 720, maximum 1280 x 768 default connected 1280x720+0+0 0mm x 0mm 1280x720 0.0* 1024x768 61.0 800x600 61.0 640x480 60.0 1280x768 0.0 output of ls /proc/acpi: button/ event When I'm in kernel 3.8.13, I can change my brightness using xbacklight. I compiled 3.10.7-r1 using genkernel all. Before the upgrade I did get a notice of "compatible issues for Nvdia users" from emerge but I still don't know the details. It there anyway to let me set the brightness? Then i found a ebuild app-laptop/nvdiabl-0.81 and tried to emerege nvidabl, I got this message: Your kernel does not support FB_BACKLIGHT. To enable you it you can enable any frame buffer with backlight control or nouveau. Note that you cannot use FB_NVIDIA with nvidia's proprietary driver Please check to make sure these options are set correctly. Failure to do so may cause unexpected problems. Once you have satisfied these options, please try merging this package again. ERROR: app-laptop/nvidiabl-0.81::gentoo failed (pretend phase): Incorrect kernel configuration options Call stack: ebuild.sh, line 93: Called pkg_pretend nvidiabl-0.81.ebuild, line 31: Called linux-mod_pkg_setup linux-mod.eclass, line 559: Called linux-info_pkg_setup linux-info.eclass, line 911: Called check_extra_config linux-info.eclass, line 805: Called die The specific snippet of code: die "Incorrect kernel configuration options" [SOLVED] I enter the menuconfig again and check the Device Drivers -> Graphics support -> Support for frame buffer devices, then i found this: <*> nVidia Framebuffer Support [*] Support for backlight control (NEW) What can i say. Recompiling...

  Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >