Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 436/985 | < Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >

  • How to make my Ubuntu an internet gateway for my Android phone

    - by yacine
    I want to use the internet of my school on my Android, the problem is they have a Squid proxy, and many applications on my phone don't use the proxy at all. The obvious solution is to install a transparent proxy on my Android to force all applications to connect through it. The problem is that I need to root the phone to make it work, and I don't want to do it because it's not really my phone and rooting is a little risky- Another solution, which is safer, is to make my computer run as a gateway, so I put my Ubuntu IP in the gateway parameter of the phone. I'm running a small proxy on my ubuntu (cntlm), so I redirect the Android traffic to it. I did it with "iptables" as follows: iptables -t nat -A PREROUTING -s 10.0.1.118 -p tcp -j REDIRECT --to-ports 8888 iptables -t nat -A PREROUTING -s 10.0.1.118 -p udp -j REDIRECT --to-ports 8888 10.0.1.118 is the IP of the phone, 8888 is the port of cntlm (proxy on my PC). Now, on the phone: When I enter www.google.com on the navigator I get nothing (web site not found, error message of Firefox). But, when I enter http://74.125.143.101 (IP of Google) I get an error message from the school proxy (so it worked in some way – my PC redirected the traffic of the phone to the Squid proxy). The error message is : The requested URL could not be retrieved while trying to process the request get / http/1.1 host 74.125.143.101 user-Agent ... ... I think the problem is in the "GET" header,it should be GET 74.125.143.101 HTTP/1.1. But I don't understand what's happening, and I'm a certified CCNA.

    Read the article

  • Limited bandwidth and transfer rates per user.

    - by Cx03
    I searched for a while but couldn't find anything concrete, hopefully someone can help me. I'm going to be running a Debian server on a gigabit port, and want to give each user his/her fair share of internet access. The first objective is easy - transfer rates (speed) per user. From what I've looked at, IPTables/Shorewall could do the job easy. Is this easy to setup, or could one of you point me at a config? I was hoping to limit users at 300mbit or 650mbit each. The second objective gets complicated. Due to the usage of the boxes, most of the traffic will be internal network traffic that does NOT get counted to the quota. However, I still need to limit the external traffic, and if they go over, cut off access (or throttle traffic to a very low speed (10mbit?)). Let's say the user has a 3TB external traffic limit. The IF part is: If the hostname they are exchanging the traffic with DOES NOT MATCH .ovh. or .kimsufi. (company owns multiple TLDs), count to the quota. Once said quota exceeds 3TB, choke them. Where could I find a system to count that for me? It would also need to reset or be able to be manually reset on a monthly basis. Thanks ahead of time!

    Read the article

  • How to change font size on display

    - by Tim
    My laptop is Lenovo T400, whose screen size is 14.1 inches and default resolution is 1440 x 900. My main OS is Ubuntu 10.10. The default font size on the display is somehow small, which might contribute to the fatigue of my eyes. My previous laptop is Acer 5000, whose screen size is 15.4 inches and the default resolution is 1024 x 768. I like reading on my old laptop better than on my new one. Is it possible to change the setting of my new one to look like reading my old one? What are the parameters that control the font size? Are screen size, resolution part of them? In Windows, there are choices for font size, while in Ubuntu I haven't find out where I can change the setting and would like know if someone here knows about it. I also wonder if I can use a separate bigger display (perhaps just like a desktop display) as the display of my laptop, in case I don't want to enlarge font size at the cost of sacrificing the amount of the content to display, and how I shall do it? Thanks and regards!

    Read the article

  • Crontab -- scheduling my backups

    - by Garfonzo
    I want to do a backup every Friday night (no, this is not the whole backup routine, just part of it). Each Friday night's backup will not be overwritten until 4 weeks later. So, essentially, I have a four revolving backups: Week1, week2, week3, and week4. Now, I need the week1 backup script to run every 4 weeks. But I also want week2's script to run every four weeks. I know that I can tell the crontab to execute something every X weeks/days/hours/whatever. However, how do I set it up so that each of these four scripts actually run on different weeks, how do I avoid all 4 scripts running on the same night, then dutifully waiting for weeks only to all run again? Thanks.

    Read the article

  • forward outbound traffic rule

    - by Claudiu
    I am trying to forward the outbound traffic to another server. Current rule is: /sbin/iptables -A OUTPUT -p tcp -s localhost -o 91.xxx.xxx.xxx --dport 65000:65010 -j ACCEPT but when I do a iptables -L, the rule its showed like this: ACCEPT tcp -- localhost.localdomain anywhere tcp dpts:65000:65010 So I guess my rule is bad written since the "destination" column shows "anywhere" Can you help me with this?

    Read the article

  • Remove some junk characters from server console log.

    - by Jayakrishnan T
    Please look in to the picture,here am trying to open(with vi editor) my server console log file(around 100MB) and it takes more than two minutes to open with so many special characters.after deleting the first line (means typing "dd")then i can easily view the file and size of the file is also reduced very much.My server OS is RHEL 5.4 and jboss is running in to it. Please help me to avoid such junk characters coming to my server console log files and it helps me to save my valuable space in server.

    Read the article

  • Why doesn't the value in /proc/meminfo seem to map exactly to the system RAM?

    - by Eric Asberry
    The values in /proc/meminfo for MemTotal don't make sense. As a human, eyeballing it, it seems to roughly correspond to the installed RAM, but for using it to display the installed RAM from an automated utility it appears to be inexact, and inconsistent. For a system with 1G of RAM, I would expect the MemTotal line to have a value of 1048576 - 1024*1024. But instead, I'm seeing 1029392. On another 4G box, I'm seeing 3870172, which is not a multiple of 1024, and it's not even close to 1029392*4. On an 8G box, I get 8128204, which again seems to have no correlation to the other values, nor is it a multiple of 1024. I'm trying to use this information to report the RAM on a status web page. My work-around is to just "round" it to the nearest 1G multiple, but I'd like to understand why these values seem inconsistent and don't match my expectations. Can somebody fill me in on what I'm missing here? EDIT: To expand on the accepted answer below.... The reference can be found here. Also of interest to me from that page, which explains the inconsistency, is this bit: meminfo: Provides information about distribution and utilization of memory. This varies by architecture and compile options. ...

    Read the article

  • Hardware recommendations for building an Ubuntu encrypted file server

    - by Robert Mashlan
    I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

    Read the article

  • Ubuntu 12.04 as router with 2 nic

    - by Blue Gene
    I have been trying this setup for weeks and still can not make this to work... ubuntu 12.04 64 bit with 2 nic nic1: eth0:192.168.2.33 -static ip with internet access (connected to modem) nic2: eth1:192.168.1.2 -static ip connected to LAN. enabled ip_forward on ubuntu box net_ip_forward = 1 on the LAN with ip address 192.168.1.5 specified gateway as 192.168.1.2 and able to ping gateway.But can not ping public address.What am i missing? on router box: route -n Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 tried ip route add 192.168.2.0/24 via 192.168.1.2 dev eth0 route -n on LAN 192.168.1.5 Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.2 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.2.0 192.168.1.2 255.255.255.0 UG 0 0 0 eth0 iptables default policy is to accept all. tracepath 8.8.8.8 from LAN 1: 192.168.1.5 0.060ms pmtu 1500 1: 192.168.1.2 3.367ms 1: 192.168.1.2 3.764ms 2: no reply Is there a way to make this work,other than NAT ing.

    Read the article

  • proxy refused to connect

    - by kichu
    i cant access internet,after showing the message "connection is established" in ubuntu 9.04 version OS . saying that proxy server is refusing to connect.what is the problem?

    Read the article

  • Running JBoss 6 with Runit / daemontools or other process supervision framework

    - by Alex Recarey
    I'm tying to use runit to daemonize JBoss. I use the /opt/jboss-6.1.0.Final/bin/run.sh script to start the server. When I do so from the comandline, JBoss does not detach (which is what we want), and will also shut down when CTRL+C is pressed. In theory a perfect candidate to use runit on. Everything works fine except when I try to get runit to shut down JBoss. When I issue the command sv stop jboss nothing happens. Runit thinks the process is stopped but jboss continues to run normally. I'm not doing anything special with the run script. This is my runit run script: #!/bin/sh exec 2>&1 exec /opt/jboss-6.1.0.Final/bin/run.sh -c standard -b 0.0.0.0 Looking at the jboss_init_redhat.sh script, the start section does mention ./bin/run.sh but the stop section has the following text: JBOSS_CMD_STOP=${JBOSS_CMD_STOP:-"java -classpath $JBOSSCP org.jboss.Shutdown --shutdown"} Any ideas of what I could try?

    Read the article

  • How to find the process(es) which are hogging the machine

    - by Aaron Digulla
    Scenario: All of a sudden, my computer feels sluggish. Mouse moves but windows take ages to open, etc. uptime says the load is 7.69 and raising. What is the fastest way to find out which process(es) are the cause of the load? Now, "top" and similar tools isn't the answer because they either show CPU or memory usage but not both at the same time. What I need is the single command which I might be able to type as it happens - something that will figure out any of System is trying to swap 8GB of RAM to disk because process X ... or process X seeks all over the disk or process X uses 400% CPU" So what I'm looking for is iostat, htop/atop and similar tools run into one with an output like this: 1235 cp - Disk trashing 87 chrome - Uses 2&nbsp;GB of RAM 137 nfs_bench - Uses 95% of the network bandwidth I don't want a tool that gives me some numbers which I can analyze but a tool that tells me exactly which process causes the current load. Assume that the user in front of the keyboard barely knows how to write "process", but the user is quickly overwhelmed when it comes to "resident size", "virtual memory" or "process life cycle". My argument goes like this: A user notices a problem. There can be thousands of reasons ... well, almost :-) The user wants to know the source of the problem. The current solutions give me lots of numbers, and I need to know what these numbers mean. What I'm looking for is a meta tool. 99% of the data is irrelevant to the problem. So what the tool should do is look for processes which hog some resource and list only those along with "this process needs a lot of CPU, this produces many IRQs, this process allocates a lot of RAM (and it's still growing)". This will be a relatively short list. It will be much more simple for someone new to this to locate the culprit from this list than from the output of, say, htop which gives me about 5000 numbers but requires me to fold multi-threaded processes myself (I have 50 lines which say VIRT 2750M but only 16 GB of RAM - the machine ought to swap itself to death but of course, this is a misinterpretation of the data that can happen quickly).

    Read the article

  • In a php script making /coderoot refer to /var/webroot/coderoot?

    - by Josh
    We are migrating a server and have modified the architecture slightly so that instead of /var/coderoot we now have /var/webroot/coderoot - I realize I could do a scripted find and replace, but I would rather have full unmodified reverse compatibility, or if that's unreasonable lets just say for theories sake. I tried using a symmlink ln -s /var/coderoot /var/webroot/coderoot but attempting to include a file in the code root using /var/coderoot/file does not work. I also tried using mod_alias with ScriptAlias and Alias. Neither worked. Is there anyway to do this?

    Read the article

  • mysql on ubunto 4 is not running and is not remotely accessible

    - by user628119
    Currently i installed ubunot on ubunto 4.4, and using following commands i can see mysql, mysqld running ps -ef | grep mysql ps -ef | grep mysqld but when I run, netstat i don't see mysql and 3306 anywhere. in my.cnf file, i have given my ip and port is 3306. also when i run this command sudo netstat -tap | grep mysql i don't see anything and commands I needed to run the mysql 5 on port 3306 and on ip=x.x.x.x for remotely accessible Looking forward to your reply

    Read the article

  • Permission denied when trying to execute a binary burned to a CD-R

    - by user16654
    On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message: bash: ./FPS1_1: Permission denied I can open other files like text documents (the executable also comes with shared libraries). I realized I had burned the CD as root so I burned another one as another user but I still have the same problem. How can I remove this permission or what is the problem? P.S. the image was in / if that helps

    Read the article

  • How to retry connections with wget?

    - by Andrei
    I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

    Read the article

  • difference between success and failed event in auditd/aureport

    - by user112358132134
    The aureport command has two options that limit the list of displayed events to those that were successful and those that failed. Per the man page: --failed Only select failed events for processing in the reports. The default is both success and failed events. --success Only select successful events for processing in the reports. The default is both success and failed events. What does this mean? Is the failure/success with regard to the actual event (e.g., a syscall that returned non-zero) or does the failure/success apply to auditd and whether or not there was an issue in processing the event?

    Read the article

  • Gentoo+urxvt+terminus: How do I change font version?

    - by gaidal
    In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

    Read the article

  • Creating own Amazon Machine Image - Kernel panic

    - by amra
    I have created own AMI and registered it on Amazon EC2. But while AMI startup I receive following error: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) The image is running locally without any problems. fstab contains: proc /proc proc defaults 0 0 /dev/sda1 / ext3 relatime,errors=remount-ro 0 1 thx for help

    Read the article

  • Right solution for /etc/hosts file reset on reboot

    - by user846226
    i've just installed funtoo and after setting the FQDN on /etc/conf.d/hostname i noticed when setting a list of aliases in /etc/hosts file it get overwtiten on each reboot. Someone points to set the aliases to 127.0.0.2 ip address but that's not a valid solution for me. Could someone point me to the file where i should place entries like 127.0.0.1 local.foo 127.0.0.1 local.bar in order to make them persist in /etc/hosts after rebooting? Thanks! PD: I think openresolv could be the one who is overwritting the file.

    Read the article

< Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >