Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 433/985 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >

• Why does everybody have the same MAC address as me?

  - by iblue

  I just bought some consumer-grade McCheap PCI-E NICs (and this was a bad idea). They both have the same MAC address. When I google it, it seems like every card of that company has the same address: 00:50:43:00:45:3e. Shouldn't they be unique? According to lspci it's a Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20). Is there a way to permanently flash a new address?

  Read the article

• Large volume at /mnt on AWS instance

  - by rhaag71

  I know this is probably a somewhat 'dumb' question :) I have an AWS (small) instance and I just noticed that there is a ~150gb volume attached at /mnt, is this normal? It kinda freaked me out, I was thinking maybe someone was trying to capture whatever I mount in /mnt, there is the entry in my fstab too (and I found that others have this by googling)... the entry is as follows /dev/xvdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 I don't have any volumes this large in my AWS volumes section though. I was just trying to understand this and be sure that someone is not trying to 'get in'... as there are many attempts daily. Thanks

  Read the article

• Iptables - forward email ports?

  - by Emmet Brown

  im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

  Read the article

• Using screen to monitor non-interactive scripts (or some other solution)

  - by Michael

  I have some autonomous scripts that run commands on remote machines over ssh. These scripts rely on getting stdout, stderr, and the return code of each command run. I want to be able to monitor the progress of the scripts on each target machine so that I can see if something has hung and possibly intervene if necessary. My initial idea was to have the scripts run commands in a screen session, so that the person monitoring could simply attach to the session with screen -x. However, it was hard to do that from a script since screen is an interactive program. I can send a command to the screen session with screen -S session -X stuff "command^M", but then I don't get the output and return code that I need back. My second idea was to put script /path/to/log in ~/.bash_profile and log the entire session to a file. Then the monitoring person could simply tail the log file. However, this doesn't provide the interactivity that I was looking for. Any ideas on how to solve this problem?

  Read the article

• How to find the reason for a weekly downtime on an Ubuntu web server hosted by AWS?

  - by IceSheep

  We started monitoring our web server using Pingdom and found out that we have a downtime of a few minutes every Sunday at 0:00 UTC. The test runs every minute and checks if a successful HTTP response (code 200) is returned on port 80. The test fails due to a timeout (no response after 30 seconds). Here's what we've already checked – without success: Since we run our webserver behind a load balancer, I've set the Pingdom test on the load balancer's public DNS and the webserver's public DNS in order to find out if there's a problem with the AWS load balancer – both tests return the same result We set up Munin on our webserver. Everything looked fine even after the failure. Since the last failure lasted only 2 minutes I suppose Munin couldn't capture a potential problem (it only checks every 5 minutes) I have checked /var/log/apache2/error.log and /var/log/syslog for suspicious entries I have checked /etc/cron.weekly and /etc/crontab for suspicious entries I have searched for files created or last-modified during 0:00 and 0:15 using this method: touch -t 201209020000 start touch -t 201209020015 end find / -newer start -and ! -newer end (nothing found) Has anybody experienced a similar problem? Any proposals on how to find the reason for this behavior? It's Ubuntu 10.04 LTS running on an AWS m1.large instance. Thanks!

  Read the article

• VPS stops responding every now and again

  - by Or W

  I have a Linode vps that I use to host some of my websites on. It's Ubuntu based and it's up to date in terms of all packages. I don't have any cron jobs scheduled or any automatic processes. I host a few (up to date) wordpress blogs there that have very little traffic altogether. Every day (at a different time) my server stops responding, I can't SSH to it, web access is getting timed out and it just dies until I reboot it through the Linode manager. On the linode dashboard I can see that the CPU is not very high (2-3%) Incoming/Outgoing traffic is on 0 and the IO count has a spike just before the server stops responding (SWAP IO is at 2k and IO Rate is at 5k). When I reboot the server everything is just fine. I'm trying to figure out a way to analyze what's going on at these random times where the server freezes up. How can I determine the problem?

  Read the article

• Listing packages in a repositiory?

  - by noloader

  I'm working on Ubuntu 12.04 Server. I want to install OpenStack, so I enabled the Cloud Archive repo: sudo add-apt-repository cloud-archive:havana After the subsequent update and upgrade, I noticed python-crypto changed. python-crypto recently fixed a CVE, so I would like to ensure I'm using the patched version of python-crypto. I'd also like to compare the python-crypto in both Ubuntu and Cloud Archive. How does one list the package information for both Ubuntu::python-crypto and CloudArchive::python-crypto? (And sorry I could not tag this with apt-cache. Its not available in the list of tags). Thanks in advance

  Read the article

• Shell script to read value from a file and compare it to another one

  - by maneeshshetty

  I have a C program which puts one unique value inside a test file (it would be a two digit number). Now I want to run a shell script to read that number and then compare with my required number (e.g. 40). The comparison should deliver "equal to" or "greater". For example: The output of the C program is written into the file called c.txt with the value 36, and I want to compare it with the number 40. So I want that comparison to be "equal to" or "greater" and then echo the value "equal" or "greater".

  Read the article

• Is it safe to run two instances of svnserve on one repository, or only one?

  - by fredden

  We've two nodes running heartbeat/drbd, and one of the services we're using is subversion. What I want to know is: is it safe to run svnserve on both nodes all the time, or should it only run on the active node? Does svnserve use file-level locking, or is it all in memory? What are the implications of running svnserve without its repositories accessible? Please let me know if this isn't clear, and I'll try my best to rephrase/clarify. :)

  Read the article

• Iptables port mapping from two PCs to one

  - by Anton

  We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

  Read the article

• Gentoo+urxvt+terminus: How do I change font version?

  - by gaidal

  In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

  Read the article

• How to know that my IP is invalid

  - by PeterMmm

  I have a script running that will start up an interface with a new IP. If the script comes up with an IP that is already in use i am in trouble. Is it possible that the script set up the new Ip, detects that this IP is already in use and then check the next one, until it finds an ip that works ? B=192.168.1. I=1 while [ "$I" != "256" ] do ifconfig eth0:1 $B.$I # check here that IP is Ok ! let "I=I+1" done

  Read the article

• Find command exclude files whose path match a certain pattern

  - by user40570

  I have a find command that looks for files that was modified recently and outputs the date find /path/on/server -mtime -1 -name '*.js' -exec ls -l {} \; I would like it to exclude any deeply nested folder that matches a certain pattern e.g. there are a number of folders that have a "statistics" directory and ".svn" directories. So i'd like to be able to say if the file that was modified yesterday is in a folder named statistics ignore it. Or perhaps not search for files in those folders at all.

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• Table 'mysql.host' doesn't exist

  - by eriktm

  100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

  Read the article

• Can't create LVM due to: not found (or ignored by filtering)

  - by James

  I'm planning to use LVM for KVM, and when I try to create a VG it fails, so how can I create my VG and LV ? Thanks [root@server ~]# vgcreate virtual-machines /dev/sda Device /dev/sda not found (or ignored by filtering). Unable to add physical volume '/dev/sda' to volume group 'virtual-machines'. [root@server ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 2.0T 929G 976G 49% / tmpfs 3.9G 124K 3.9G 1% /dev/shm /dev/sda1 194M 57M 128M 31% /boot [root@server ~]# pvscan No matching physical volumes found

  Read the article

• How can I check for a string match AND an empty file in the same if/then bash script statement?

  - by Mike B

  I'm writing a simple bash script to do the following: 1) Check two files (foo1 and foo2). 2) If foo1 is different from foo2 and foo1 NOT blank, send an email. 3) If foo1 is the same as foo2... or foo1 is blank... do nothing. The blank condition is what's confusing me. Here's what I've got to start with: diff --brief <(sort ./foo1) <(sort ./foo2) >/dev/null comp_value=$? if [ $comp_value -ne 0 ] then mail -s "Alert" [email protected] <./alertfoo fi Obviously this doesn't check for blank contents. Any thoughts on how to do that?

  Read the article

• Explanation of command to uppercase the first letter of a file

  - by hazielquake

  Hi I'm trying to learn to rename files with the command line, and after browsing around a lot of pages I finally found a command that uppercases the first letter of a file, but the problem is that I want to understand the meaning of each command. The command is: for i in *; do new=echo "$i" | sed -e 's/^./\U&/'; mv "$i" "$new";done I understand the 'for' kinda... but not the 'echo' or '`' and especially the sed command. if someone has a little patience to explain the meaning of each thing that'd be awesome! Thanks!

  Read the article

• php extensions & apache mods gone/not working after server restart?

  - by user1782359

  I was wondering if anyone has ever come across this before, as I'm pretty stumped to be honest, and my server admin knowledge isn't particular good so I'm not sure what could even be wrong, let alone how to fix it. Basically, Thursday last week everything was fine on our server. I come in on Friday and it's a mess: php extensions are missing/not working, apache modules are gone. (e.g. oci_* was gone completely, odbc_ not working but still there, the apache ntlm_auth for single sign on was gone and so the website wasn't even loading in IE). I'm ruling out anything deliberate because it's just incredibly unlikely. The only thing that really happened between thursday & friday is that on thursday evening one of the network guys did a RAM upgrade on the server and restarted it. That's it, nothing else. Now I'm wondering if somehow those extensions and such which we installed months ago were somehow only saved in a local memory of sorts, and a restart has wiped them? But we installed them all as root, so I don't see why it should be any different from installing anything else. It makes little/no sense to me. To expand on an example of something that's gone very wrong, the php odbc_ extension: It's still on the server, it doesn't return undefined function or anything. But it just cannot connect to the datasource any more. I've tested it through the command line and it's working perfectly fine with that datasource and login details, but all of a sudden having it in the php odbc_connect() function and it just can't connect. ( [S1000][unixODBC][FreeTDS][SQL Server]Unable to connect to data source. ) But unixODBC is set up fine. Like I say i've tested it all through the terminal and it can connect, and we've not changed anything, it's just now all of a sudden not working through the PHP function. Anyone have any ideas whatsoever as to what could be going on? This is on CentOS 5.x by the way.

  Read the article

• OpenSSH (Windows) does not forward X11

  - by Shulhi Sapli

  I'm running Ubuntu 13.04 in VM and I wanted to do X11 forwarding to my host (Win 8), so far it works fine using PuTTY and XMing server for Windows. But I am curious why it doesn't work if I use OpenSSH binaries (it comes together with Git for windows). This is what I've done so far: ssh -X [email protected] (also tried with -Y) then gedit but received error of Cannot open display. echo $DISPLAY came out as empty. So, I try to export DISPLAY=localhost:0.0 but it still won't work. The DISPLAY environment that I set is exactly as when it runs with Putty. I also try changing the DISPLAY to 192.168.2.3:0.0 and other display number as well, but still it won't work. Of course I could just use Putty to make it work, but I was wondering why OpenSSH binaries does not work. I have enabled all settings required in both /etc/ssh/ssh_config and /etc/ssh/sshd_config. If I run with -v option, this is what I get F:\SkyDrive\Projects> ssh -X -v [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to 192.168.2.3 [192.168.2.3] port 22. debug1: Connection established. debug1: identity file /c/Users/Shulhi/.ssh/identity type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_rsa type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.2.3' is known and matches the RSA host key. debug1: Found key in /c/Users/Shulhi/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Shulhi/.ssh/identity debug1: Trying private key: /c/Users/Shulhi/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password: It seems that there is no request for X11 (I'm not sure if there is should be one too here). Any pointers why it doesn't work?

  Read the article

• Help with user login on Centos 5.6

  - by Owen

  I added a user for the sole purpose of using SU for root. I did not allow the creation of a home directory when creating the user. So now when I login as this user I get the following: Could not chdir to home directory /home/MYUSERNAME: No such file or directory Couldn't resolve homedir for current user at - line 0 BEGIN failed--compilation aborted. Couldn't resolve homedir for current user at - line 0 BEGIN failed--compilation aborted. Is this an error, and if so how do I fix it so it is not looking to "resolve" the homedir?

  Read the article

• How to configure multiple addresses on a single interface using Fedora 16

  - by cg.

  I upgraded from Fedora 14 to 16, recently. I had two static IP v4 addresses configured on my ethernet interface by creating two files in /etc/sysconfig/network-scripts: ifcfg-eth0 -> first address ifcfg-eth0:1 -> second address After the upgrade, this resulted in an error message during the boot process and in only the second address being successfully configured on the interface. So, what is the correct way to configure multiple addresses on a single interface on Fedora 16? I could not find anything on this subject in the documentation so far.

  Read the article

• Is there a version of Debian-Lenny that is legal for export from the US?

  - by molecules

  I wanted to bundle my application in a Debian-Lenny Virtual Machine so others could download it and run it without having to configure anything. However, I don't want to have to worry about US legal issues. Many of the packages in a default Debian installation include encryption algorithms. Are all default versions export-safe?    If not, is there an export-safe version?       If not, is there an easy way to make one?

  Read the article

• How to retry connections with wget?

  - by Andrei

  I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

  Read the article

• `adduser [options] user group` fails ubuntu 11.04

  - by Rob

  I'm want to use adduser However it doesn't seem to work if I provide the second argument for the user's group root@a:~# adduser rick staff adduser: The user `rick' does not exist. The group exists root@a:~# addgroup staff addgroup: The group `staff' already exists. The man page says this should work... adduser [options] user group Any ideas? I can do: adduser --ingroup staff rick So no massive issue, just seems strange.

  Read the article

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >