Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 432/985 | < Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >

• Execute script before shutting down in Ubuntu

  - by juanefren

  When I shut down my computer I want to show some pending tasks that I have to do before leaving the office... I did a local application to manage those tasks, so basically I just want to run a command, and shut down after I kill the app executed. I have already tried with these options: * /etc/gdm/PostSession/Default -- this works only when I select LogOut option instead Shutdown. * /etc/rc0.d/K01mycustomscript -- execute script after X is killed * $HOME/.bash_logout -- This looks like does nothing. * ./app-to-run && sudo shutdown -h now -- Don't like it for 2 reasons, prompts for sudo password, and can't use my laptop shutdown button. I am using Ubuntu 10.04

  Read the article

• lilo.conf questions

  - by Jack

  I use lilo, and have two different kernels. One is newer and use KMS with it. What I would like to do, is to be able to set vga=xxx for only one of the kernels. Is this possible? I would also like to be able to code into lilo.conf options that I pass on the commandline, but am unsure how to do this

  Read the article

• Configuring snedmail to forward mail for a specific domain to a specific mail server without using M

  - by aHunter

  I am new to sendmail and would like to configure sendmail to forward all mail for a specific email address to another internal mail server. I need it to ignore the MX records and only send it to the server I specify but am not sure which files to edit or how to configure the sendmail config. Is it sufficiant to add the server to the /etc/hosts and the /etc/mail/local-host-names files? Thanks in advance.

  Read the article

• Upgrade CentOS 5.2 to 5.3 -- but not 5.4

  - by Jeff Leyser

  Server currently running CentOS 5.2. Developers tell me they'd like the machine upgrade to CentOS 5.3 -- but not all the way to CentOS 5.4, as they haven't tested with 5.4 yet. I'm pretty sure a yum upgrade will put me at 5.4, as a yum check-update shows all sorts of 5.4 packages. So how do I move up to 5.3?

  Read the article

• Is there any reason this cronjob would fail in cron, but not on the command line?

  - by Treffynnon

  I have written a little one liner that will email me when a list of files changes - I used sha512 to generate a list of hashes and then periodically check that those hashes still match. */5 * * * * /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] It works fine on the command line with: /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] As soon as I run it as a cronjob though it emails every time it runs with the failure message instead of only when the sha512sum check should fail. Is there something silly I have missed in a rush? I forgot to mention that I am running an Ubuntu machine.

  Read the article

• What's wrong with this iptable rule?

  - by warl0ck

  I run dnsmasq locally as a cache server, in the old days, I allow all INPUT packets from lo+, and set policy of INPUT to DROP: -A INPUT -i lo+ -j ACCEPT Now I decide to put this on the raw table to speed up rules matching, -A PREROUTING -i lo+ -j ACCEPT But that doesn't work as expected. Why? Since the packets get processed by the raw table first, then nat, then filter, why isn't that rule work the same as the old one?

  Read the article

• Url rewrite rule

  - by vvr

  How to redirect a page form show.php?id=(15charstring) to show/(15charstring) I tried like this it is doing reverse means it is redirecting /show/(15chars) to show.php?id=(15chars) RewriteEngine on RewriteRule ^/show/([a-zA-Z0-9]{15})$ http://site.com/show.php?id=$1 Second case is i have to redirect to another page if he added &m=true to the url show.php?id=(15chars)&m=true html/show.php?id=(15chars).

  Read the article

• NSD reply from unexpected source

  - by Ximik

  I have server with NSD. There are MAIN_IP and ADD_IP. When I try to get IP of my site from server I have right output dig @localhost my_site.com But when I try to make this from my PC, I have dig @my_ns_server.com my_site.com ;; reply from unexpected source: MAIN_IP#53, expected ADD_IP#53 (ADD_IP is IP of my_ns_server.com) What should I do? UPD: My interfaces conf auto eth2 allow-hotplug eth2 iface eth2 inet static address xxx.xxx.xxx.234 netmask 255.255.255.252 network xxx.xxx.xxx.232 broadcast xxx.xxx.xxx.235 gateway xxx.xxx.xxx.233 dns-nameservers MY_ISP_IP dns-search MY_ISP_DOMAIN auto eth2:0 iface eth2:0 inet static address xxx.xxx.xxx.124 netmask 255.255.255.0 xxx.xxx.xxx is the same for all IPs

  Read the article

• why page is automatically redirecting to some other sites

  - by raj

  In my browser (Firefox 10.0.7) the page is automatically redirect to some other sites without clicking any link. If I enter the superuser.com url after pressing Enter button, It redirect to some other sites. sometimes while refreshing also the page is redirect to some other site. It's redirecting to this sites http://result.seenfind.com/ncp/Default.aspx?term=gatlinburg%20cabin&u=1000670913 http://search.cpvee.com/search.php?q=gatlinburg+cabin&y=&f=2168&s= http://www.insidecelebritygossip.com/ I cleared all history and all but still same problem. I am using CentOS 6.3

  Read the article

• Corrupt tar (Resulting folder smaller than packed file)

  - by Om3g4

  Hi everybody, I have an issue with a tarball created on a SuSe 10.3 Server version. The .tar file has a size of 6.5 GB but if I untar it under Ubuntu 9.10 the resulting folder only has a size of 1.5 GB. commands used: tar cvf for packing, tar xvf for unpacking. Perhaps somebody knows how this can be fixed, would be great, cheers

  Read the article

• sudoer scheme to allow useful access to another web developer yet retain future control of a virtual

  - by Tchalvak

  Background: Virtual Private Server I have a virtual private server that I'm looking to host multiple websites on, and provide access to another web developer. I don't care about putting too many constraints on him, though I wouldn't mind isolating the site that he'll be developing from other sites on the server that I will develop. The problem: retain control Mainly what I want is to make sure that I retain control over the server in the future. I want to reserve the ability to create/promote/demote and other administrative functions that don't deal with web software. If I make him an admin, he can sudo su - and become root and remove root control from me, for example. I need him not to be able to: take away other admin permissions change the root password have control over other security/administrative functions I would like him to still be able to: install software (through apt-get) restart apache access mysql configure mysql/apache reboot edit web development configuration type files in /etc/ Other Standard Setups would be happily considered I've never really set up a good sudoers file, so simple example setups would be very useful, even if they're only somewhat similar to the settings that I'm hoping for above. Edit: I have not yet finalized permissions, so standard, useful sudo setups are certainly an option, the lists above are more what I'm hoping I can do, I don't know that that setup can be done. I'm sure that people have solved this type of problem before somehow, though, and I'd like to go with something somewhat tested as opposed to something I've homegrown.

  Read the article

• How to map Ctrl + ',' to greater key( '>') or Ctrl + '.' to less key( '<' ) using xmodmap?

  - by Maxrunner

  So im trying to creating a combination of keys to generate the ISO key for Portuguese layout, the key in question is the <, pressing it normally will generate the '<' character, pressing + shift will generate the ' ' character. So i'm trying to create a combination while using xmodmap, and i want this to work for all programs.I've been searching on Google and came up with this example for Control + P = Up: Control + p = Up arrow example The example for that behaviour is: xmodmap -e "keycode 33 = p P Up" keycode 33 matches the p key, so where does control comes up in that command? regards,

  Read the article

• What is the meaning of the 'Personalities' feature under /proc/mdstat

  - by drcelus

  On some systems I see this : Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty] md1 : active raid1 sdb1[1] sda1[0] 10485696 blocks [2/2] [UU] md2 : active raid1 sdb2[1] sda2[0] 477371328 blocks [2/2] [UU] And other systems show : Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204788 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 4193272 blocks super 1.1 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 483985276 blocks super 1.1 [2/2] [UU] bitmap: 0/4 pages [0KB], 65536KB chunk I wonder what is the meaning of Personalities and the impact of having different values.

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• Postifix SMTP Load Balance

  - by user103373

  I want to load balance outbound emails between 3 post-fix gateways for sending mails only reason is to use multiple different source IPs to increase throughput & inbox delivery. Each gateway should receive an approximately equal amount of outbound messages. How is it possible please suggest. +---------- smtp A --------- Internet | clients -------- smtp lb ----- smtp B --------- Internet | +---------- smtp C --------- Internet

  Read the article

• Almost All Logical Volumes Disappeared - Recovery?

  - by Alex

  We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

  Read the article

• $DISPLAY dependent gtk themes

  - by Vlad Seghete

  I have a computer at home that I log into remotely. The "monitor" for it is a TV, so I want gtk applications to use a large font and icon theme, which I managed to do by editing the ~/.gtkrc-2.0 file and some other similar stuff. What I want to be able to do is have a separate theme for when I'm logging in remotely. The best way to explain is that I would like my gtk theme choice to be dependent on the X display that the application is started on. For example, if I start something on :0.0 then that is the TV and I want large fonts, but if I start it on localhost:10.0 I want to use a regular size font, because it will get rendered on my laptop screen. The elegant solution would be to have some sort of IF statement in the .gtkrc-2.0 file that checks the $DISPLAY variable and behaves accordingly. The problem is I can't find any documentation on control structures in .gktrc files, or if it's even possible to do that.

  Read the article

• Explanation of command to uppercase the first letter of a file

  - by hazielquake

  Hi I'm trying to learn to rename files with the command line, and after browsing around a lot of pages I finally found a command that uppercases the first letter of a file, but the problem is that I want to understand the meaning of each command. The command is: for i in *; do new=echo "$i" | sed -e 's/^./\U&/'; mv "$i" "$new";done I understand the 'for' kinda... but not the 'echo' or '`' and especially the sed command. if someone has a little patience to explain the meaning of each thing that'd be awesome! Thanks!

  Read the article

• Autosaving on emacs or xemacs files (preferably on loss of focus)

  - by Spencer

  Ideally I want to replicate with emacs functionality from TextMate, whereby on loss of focus i.e. I click away from the buffer, my file saves. If this isn't possible, I want to customize emacs so that it will autosave the file for every character I write. When I say this I don't mean I want to autosave to the ~ backup files. I want to save the file I am currently working on. I am working on a Fedora VM. Note I am not looking for a backup or autosave. I want the file I am actually in to save, so that if I loaded the html file I am editing in a web browser it would reflect my new changes without me having to explicitly change it.

  Read the article

• how to check if something is in the queue of torque?

  - by kloop

  I want to re-run some jobs that completed prematurely under torque. These jobs are run through .job scripts (using qsub). However, I don't want to re-run a job which is already in the queue. Given a script filename, how can I know whether it is already in torque's queue (using qstat?) or not? I prefer to do it programmatically, of course, so any oneliner that searches for a given script name would be great. I will note that I can grep submit_args in qstat -f, but I can't get it to display the whole script name when it is too long. This is crucial. EDIT: I managed to solve it using the following command: qstat -x | perl -pi -e 's/\<\//\n/g' | grep job$ | grep -v submit_args | perl -pi -e 's/Job_Id\>\<Job_Name\>//' works because all my scripts end in the string "job".

  Read the article

• How do I make sure that BOTH my server and MYSQL have the same timezone?

  - by Alex

  Because when I create a time in Python scripts..I want it to match MYSQL's time. How do I make BOTH of them pacific time?

  Read the article

• My Filesystem is almost used up. How do I use my other filesystem?

  - by Alex

  Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 7.4G 120M 99% / udev 3.7G 4.0K 3.7G 1% /dev tmpfs 1.5G 168K 1.5G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.7G 0 3.7G 0% /run/shm /dev/xvdb 414G 199M 393G 1% /mnt How can I use /dev/xvdb's space? (Or move some gigs into xvda1)

  Read the article

• create symlink to another machine

  - by microchasm

  Hi, I have 2 machines. Both running CentOS. Box1 is webserver with apache, php. Box2 is mysql, and file storage. The files will only be accessible from Box1 within the webapp. I'd like to somehow create a symlink or somesuch on box1 to a folder on box2 where uploaded files can be stored and retrieved. Security in mind, what would be the best way to go about linking these 2 boxes up in a transparent (to apache) way? NB: the boxes are connected directly to each other via a crossover cable; no lan access to box2. Much thanks!

  Read the article

• File permissions on web server

  - by plua

  I have just read this useful article on files permissions, and I am about to implement a as-strict-as-possible file permissions policy on our webserver. Our situation: we have a web server accessed through sftp by different users from within our company, and we have the general public accessing Apache - sometimes uploading files through PHP. I distinguish folders and files by their use. So based on this reading, here is my plan: All people who need to upload files will have separate users. But all of those users will belong to two groups: uploaders, and webserver. Apache will belong to the group webserver. Directories Permission: 771 Owner: user:uploaders Explanation: to access files in the folder, everybody needs to have execute permission. Only uploaders will be adding/removing files, so they also get r+w permission. Files within the web-root Permission: 664 Owner: user:uploaders Explanation: they will be uploaded and changed by different users, so both owner and group need to have w+r permissions. Webserver needs to only read files, so r permission only. Upload-directories Permission: 771 Owner: user:webserver Explanation: when files need to be uploaded, Apache needs to be able to write to this directory. But I figure it is safer to change the owner to webroot, thus giving Apache sufficient privileges (and all uploaders also belong to this group and will have the same permissions), while safeguarding from "others" writing to this folder. Uploaded files Permission: 664 Owner: user:webserver Explanation: after uploading Apache might need to delete files, but this is no problem because they have w+r permission of the folder. So no need to make this file any more accessible than r access for group. Being not an expert on file permissions, my question is whether or not this is the best possible policy for our situation? Any suggestions welcome.

  Read the article

• What I should know about memory management?

  - by bua

  first of all: I don't use stackadmin or similar so please don't vote for moving there, I'm reading man top and paper "what every programmer should know about memory ..." I need really simple explanation like for retard ;) Having following top dump: top - 11:21:19 up 37 days, 21:16, 4 users, load average: 0.41, 0.75, 1.09 Tasks: 313 total, 5 running, 308 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.6%sy, 0.9%ni, 96.2%id, 0.1%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 132103848k total, 131916948k used, 186900k free, 54000k buffers Swap: 73400944k total, 73070884k used, 330060k free, 13931192k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3305 tudb 25 10 144m 52m 940 R 6.0 0.0 1306:09 app 3011 tudb 15 0 71528 19m 604 S 3.3 0.0 171:57.83 app 3373 tudb 25 10 209m 93m 940 S 3.0 0.1 1074:53 app 3338 tudb 25 10 144m 47m 940 R 2.7 0.0 780:48.48 app 4227 tudb 25 10 208m 99m 904 S 1.3 0.1 198:56.01 app 8506 tudb 25 10 80.7g 49g 932 S 2.0 39.6 458:31.22 app I'm wondering what is: RES (my expl. physical memory consumption ? see 49GB) VIRT (memory mapped disk to cache? see 80GB) SHR (shared pages?) Swap: (is this cached label - for memory mapped disk into swap cache?) Should sum of RES give MEM: X used? or maybe sum of VIRT?

  Read the article

< Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >