Search Results

Search found 15925 results on 637 pages for 'os walk'.

Page 436/637 | < Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >

  • Grub does not show a Windows 8 option after dual boot

    - by skytreader
    So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

    Read the article

  • Active DFS node did not restore after failure

    - by Mark Henderson
    On Tuesday we had a Server 2008 R2 DFS-R node go offline unexpectedly. DFS did the right thing and started routing requests to a different node, which was in a remote site. This is by design, because even though it's slow, at least it's still working. We had the local DFS-R node back online within an hour, and it had synced all its changes 10 minutes after that. 3 of the 5 terminal servers reset themselves to the local DFS node, but the other two stayed pointing at the remote DFS node for three days, until someone finally piped up about how slow requests were. What reasons could there be why some, but not all, of the server reverted? Is the currently active DFS node for a namespace exposed anywhere in the OS (WMI, or even scripts) so that we can monitor the active nodes?

    Read the article

  • Viewing and deleting partitions using the BIOS?

    - by cluelesscoder
    I have an M4A785TD-M EVO Asus motherboard which uses Asus Express Gate for its motherboard (says American Megatrends, Inc at the bottom). I activate it by pressing Del; also says Tab activates BIOS Post but that doesn't seem to do anything. I went into this expecting to see a breakdown of the partitions. I have a 300GB hard-drive separated into 3 partitions. While it does show SATA for my main hard-drive and my disk drive, it doesn't show the partitions. Is this typical? Do I have to us an OS-based tool to delete the partitions or can I delete using my BIOS? I tried updating the BIOS through Asus's Update utility but it appears to be broken (connects/disconnects repeatedly). I used HWiNFO32 to get some information: BIOS Date: 06/30/10 BIOS Version: 2103 EFI BIOS: Not Capable Tried to update but it directs me to biosagentsplus.com which wants $30 for the download (another question would be how to avoid them).

    Read the article

  • Remap Apple MacBook Eject key in Windows?

    - by user1238528
    I have a MacBook with Windows 7 on it as my daily driver. My MacBook has a nearly useless Eject key, but I wish it was a forward delete key. KeyRemap4Macboook works great in OS X. Is there any software that is equivalent in Windows? I have tried KeyTweaks and HotKeys and neither of them will recognize the Eject key. I looked it up and I think it is key 161. Is there any way to make the key into a more useful forward delete? Could I just go into the registry and do it that way?

    Read the article

  • HTG Explains: Should You Buy Extended Warranties?

    - by Chris Hoffman
    Buy something at an electronics store and you’ll be confronted by a pushy salesperson who insists you need an extended warranty. You’ll also see extended warranties pushed hard when shopping online. But are they worth it? There’s a reason stores push extended warranties so hard. They’re almost always pure profit for the store involved. An electronics store may live on razor-thin product margins and make big profits on extended warranties and overpriced HDMI cables. You’re Already Getting Multiple Warranties First, back up. The product you’re buying already includes a warranty. In fact, you’re probably getting several different types of warranties. Store Return and Exchange: Most electronics stores allow you to return a malfunctioning product within the first 15 or 30 days and they’ll provide you with a new one. The exact period of time will vary from store to store. If you walk out of the store with a defective product and have to swap it for a new one within the first few weeks, this should be easy. Manufacturer Warranty: A device’s manufacturer — whether the device is a laptop, a television, or a graphics card — offers their own warranty period. The manufacturer warranty covers you after the store refuses to take the product back and exchange it. The length of this warranty depends on the type of product. For example, a cheap laptop may only offer a one-year manufacturer warranty, while a more expensive laptop may offer a two-year warranty. Credit Card Warranty Extension: Many credit cards offer free extended warranties on products you buy with that credit card. Credit card companies will often give you an additional year of warranty. For example, if you buy a laptop with a two year warranty and it fails in the third year, you could then contact your credit card company and they’d cover the cost of fixing or replacing it. Check your credit card’s benefits and fine print for more information. Why Extended Warranties Are Bad You’re already getting a fairly long warranty period, especially if you have a credit card that offers you a free extended warranty — these are fairly common. If the product you get is a “lemon” and has a manufacturing error, it will likely fail pretty soon — well within your warranty period. The extended warranty matters after all your other warranties are exhausted. In the case of a laptop with a two-year warranty that you purchase with a credit card giving you a one-year warranty extension, your extended warranty will kick in three years after you purchase the laptop. In that many years, your current laptop will likely feel pretty old and laptops that are as good — or better — will likely be pretty cheap. If it’s a television, better television displays will be available at a lower price point. You’ll either want to upgrade to a newer model or you’ll be able to buy a new, just-as-good product for very cheap. You’ll only have to pay out-of-pocket if your device fails after the normal warranty period — in over two or three years for typical laptops purchased with a decent credit card. Save the money you would have spent on the warranty and put it towards a future upgrade. How Much Do Extended Warranties Cost? Let’s look at an example from a typical pushy retail outlet, Best Buy. We went to Best Buy’s website and found a pretty standard $600 Samsung laptop. This laptop comes with a one-year warranty period. If purchased with a fairly common credit card, you can easily get a two-year warranty period on this laptop without spending an additional penny. (Yes, such credit cards are available with no yearly fees.) During the check-out process, Best Buy tries to sell you a Geek Squad “Accidental Protection Plan.” To get an additional year of Best Buy’s extended warranty, you’d have to pay $324.98 for a “3-Year Accidental Protection Plan”. You’d basically be paying more than half the price of your laptop for an additional year of warranty — remember, the standard warranties would cover you anyway for the first two years. If this laptop did break sometime between two and three years from now, we wouldn’t be surprised if you could purchase a comparable laptop for about $325 anyway. And, if you don’t need to replace it, you’ve saved that money. Best Buy would object that this isn’t a standard extended warranty. It’s a supercharged warranty plan that will also provide coverage if you spill something on your laptop or drop it and break it. You just have to ask yourself a question. What are the odds that you’ll drop your laptop or spill something on it? They’re probably pretty low if you’re a typical human being. Is it worth spending more than half the price of the laptop just in case you’ll make an uncommon mistake? Probably not. There may be occasional exceptions to this — some Apple users swear by Apple’s AppleCare, for example — but you should generally avoid buying these things. There’s a reason stores are so pushy about extended warranties, and it’s not because they want to help protect you. It’s because they’re making lots of profit from these plans, and they’re making so much profit because they’re not a good deal for customers. Image Credit: Philip Taylor on Flickr     

    Read the article

  • Best motherboard power supply combo for backblaze server

    - by jin14
    Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

    Read the article

  • Changes to talk/ytalk or alternative chat in the Linux terminal

    - by cascaval
    While looking for a piece of software that provides chat between 2 Linux server users logged in the terminal, I tried talk/ytalk. Unfortuntaley it provides chat between users on separate walls (each user has its own wall) and the messages lack timestamps. Is it possible to set it up so that at least timestamps are provided? Alternatively, is there any other software that could provide one wall on which users write messages prepended with time? Simple chat with messages listed in the order of submission would be ideal: 13:05:48 [bridgekeeper@...]: What is the air-speed velocity of an unladen swallow? 13:06:28 [cascaval@...]: What do you mean? An African or European swallow? I already tried wall and write but they don't fit the bill. OS: Debian 6.0

    Read the article

  • Snow Leopards Desktop Icons keeps Resizing Repeatedly

    - by Arashi
    I'm using a new macbook 10.6.5. I've been using mac OS for years. However, the problem that I'm getting is that the desktop icons keep resizing repeatedly. It keeps going to the biggest size possible and its driving me crazy. I've been resizing it back to medium size all the time. But when I start doing something at the finder it starts resizing by itself once again. Is there a fix to this problem? Please help.

    Read the article

  • Everytime I click on a link from within Mac, parallels boots up my Windows VM and opens the link there

    - by Christoph
    Everytime I click on a link from within Mac, parallels boots up my Windows VM and opens the link there. That's super annoying and I haven't found a configuration to change it. In the settings of my Windows VM there is an option where to launch the webbrowser. However that seems to only affect links that I open from within my Windows session. UPDATE I just stumbled across this answer: How to disassociate a file type with an application in Mac OS So I disabled "share windows apps with mac" completely. Also this seems to be overly protective it at least does the trick. I think it also deactivates that running windows apps show up in the dock but I don't care that much about that anyway.

    Read the article

  • iSCSI RAID1 on two servers, fail scenario

    - by Franz Kafka
    Hallo, a simple question: Image I have two servers, each server has two disks in RAID1. Now I merge the two arrays with iSCSI to one RAID1 disk. Two questions: Can I do the merging of the 4 disks in one go? I can't image how. First I will have to install the os, and then the raid controller is already set up to RAID1. If a whole server fails the other server would continue working without any problems? Does iSCSI notice that the other server is missing and treet this as if the two disks were broken? When the server comes back online the data is resynced, as if I installed new disks into a array? Can I image that this way? Thanks alot.

    Read the article

  • Hearing repeated sound in Linux mint Chrome Browser

    - by aravind.udayashankara
    I am using Linux mint OS since an Year , I use to consistently download updates and install , I use chrome as a default browser , when ever I open youtube and watch some video , I listen to some repetition in sound ( say repeated lyrics of song ) while it is playing , In firefox it is working fine . What is the problem am I missing any plugin , AFAIK Chrome doesn't need a flash player plug in , It has a built in flash player . IS that the problem ? And also previously I was not facing this , recently I started using Cinimon UI centOS after this all these kind of problems started MY hard ware is 64 bit intel core i3 and also I have installed linux mint 64 bit Please let me know what is the problem and how to fix this . Thanks in advance for responding to this post

    Read the article

  • "This CPU is not compatible with 64-bit mode." - Installing Windows 7 Ultimate 64-bit on a netbook with a 64-bit Intel Atom CPU

    - by galacticninja
    I tried installing Windows 7 Ultimate SP 1, 64-bit on a netbook (Lenovo IdeaPad S110), which has the Intel Atom N2800 (1.86 GHz) as its processor, but I get the following error message when the Windows 7 installation DVD is loading: It says "Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode". The Intel Atom N2800 is a 64-bit CPU according to its webpage. I am wondering why the Windows 7 installer shows this error message, despite this. Is there something I must configure first before installing Windows 7, 64-bit? Or is the netbook not compatible with a 64-bit OS? I am trying to format the netbook and install Windows 7 Ultimate 64-bit, instead. Other details: The netbook has 2 GB RAM. The netbook initially had Windows 7 Starter (32-bit) installed.

    Read the article

  • Dual boot Windows 8 and Ubuntu?

    - by askvictor
    I've installed Windows 8 on a machine (lenovo x220 laptop) with Ubuntu 12.10 already installed on another disk. I am guessing that Windows 8 has convinced the laptop to switch to UEFI boot (rather than the BIOS boot that was there previously) as the Lenovo splash screen on startup now no longer has the options to interrupt the boot process (e.g. to choose the boot drive). Previously I had Windows 8 on one drive and Ubuntu on the other drive, so could choose my OS through the BIOS rather than through grub or other bootloader but now no longer have that option. How can I get back the option to boot Ubuntu? I would sort of prefer UEFI boot as it seems much faster than BIOS.

    Read the article

  • Why does my computer show a black screen when booting into Windows Vista?

    - by dassouki
    Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

    Read the article

  • Are there plans for handwriting recognition?

    - by Patrick
    This is a big feature when it comes to putting Ubuntu onto tablets. Currently, Netbook edition works great for that purpose and the pen digitiser is perfect, but the handwriting would be a real dealmaker (especially for my business - we could actually move to Linux) to compete with the Windows one. CellWriter exists, but that only handles character and keyboard input (but I don't know about multitouch on the keyboard). It also needs to handle print and cursive, because character mode can be slow and uncomfortable (unless you're writing passwords). Lastly, CellWriter needs to have some default letter shapes rather than having to be trained from the start. There is a software package called MyScript (by Vision Objects) that handles all four modes (keyboard, character, print, cursive) plus calculator and fullscreen, but it's only free as a trial. Still, it would be nice to see it in the For Purchase section and the trial in the free section of the Software Centre. The only other ones are for Chinese/Japanese/Korean characters. What would really make a difference for us is the integration of some formal API with the OS that can automatically activate when running on a tablet to pass ink data to whatever recognition system is installed, and have something available (however rudimentary) to use it.

    Read the article

  • How can I check whether a volume is mounted where it is supposed to be using Python?

    - by Ben Hymers
    I've got a backup script written in Python which creates the destination directory before copying the source directory to it. I've configured it to use /external-backup as the destination, which is where I mount an external hard drive. I just ran the script without the hard drive being turned on (or being mounted) and found that it was working as normal, albeit making a backup on the internal hard drive, which has nowhere near enough space to back itself up. My question is: how can I check whether the volume is mounted in the right place before writing to it? If I can detect that /external-backup isn't mounted, I can prevent writing to it. The bonus question is why was this allowed, when the OS knows that directory is supposed to live on another device, and what would happen to the data (on the internal hard drive) should I later mount that device (the external hard drive)? Clearly there can't be two copies on different devices at the same path! Thanks in advance!

    Read the article

  • Where did the text of my .html file go in text edit on mac.

    - by David
    I recently created a .html file in text edit on my mac (os x 10.5.8). I then opened that .html file in my browser and it showed the page i created just fine. I closed the .html file and text edit and refreshed the page. It still worked fine. Then i opened up the .html file in text edit again and all the text was gone (the page in the browser still works fine though). Where did all the text go?

    Read the article

  • Best practice on Linux servers and CPU/power throttling?

    - by Valentin
    I am running a couple of Debian 6 (2.6.32) and 7 (3.2) Linux servers and all of them have energy saving settings enabled in their BIOS. Furthermore Linux shows that the CPUs are throttled if the servers are idling. I wonder if this could cause any harm - could there be e.g. performance impacts because Linux would not be able to handle throttling correctly? Is there a best practice for Linux servers and power/CPU throttling? Do you guys switch your energy profiles to "performance" or do you leave both the BIOS and the OS with their default settings? The reason I am asking is that I encountered several performance issues on physical Dell servers although all values (CPU/load, memory, I/O, network etc.) seemed to be normal. After changing the BIOS power settings to "performance" in those specific cases, I was able to get rid of the performance issues.

    Read the article

  • How do I get wireless and video working on a Sony Vaio vpc-z21x9r

    - by Alex
    OS: Ubuntu 11.10 Kernel: 2.6.37.6 Laptop: sony vaio vpc-z21x9r The problem: I can't change level of screen backlight; also can't enable wi-fi. While using 3.0 kernel everything is ok, but the laptop discharges too quickly. Results for lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 5f) VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) there is no wlan0 in ifconfig -a too. I've fount that kernel should already have drivers for this graphics controller, but when i load up in restore mode, it writes "fall" while trying to load up some video drivers. To change the level of backlight i've alrady tried: xbacklight -set XX , smartdimmer -s XX and got this init_ nvclock() failed! also sudo setpci -s 00:02.0 F4.B=XX with no results. As for wi-fi, i've found driver but i don't understand how to install it. Here it is How can I fix these problems? Thank you for your help and time! Also tried to fix problems with backlight writing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor Still no results. Is there any sense in recompiling kernel, I mean 2.6.37.6. Can it make any improvements in the situation?

    Read the article

  • How does the build quality of laptops compare?

    - by pgwillia
    I'm looking to replace my 5 year old laptop. I want my next laptop to endure at least this long. I typically have Thunderbird, Firefox, Eclipse Java IDE, Skype, a ssh session, and Apache Tomcat running. I'm currently running Karmic Ubuntu, but am agnostic about operating system and would move to Win 7 or OS X. I frequently travel with this computer. I also value battery longevity and power conservation (if possible). Above all I'm looking to minimize cost. I think the hardware that best meets my needs is an Intel i7 processor, 8 GB RAM, 100GB @7200 rpm or SSD hardrive, and about 15 inch monitor. These specs are met by most brands. Does anyone know specific pros/cons and build quality for Macbook Pro, Lenovo Thinkpad (W510 or T510), Sony's VPC-F1190, and ASUS G Series G73JH-X1 NoteBook? Are all i7 processors created equal? Do you have other suggestion that meet my needs?

    Read the article

  • Software/FakeRAID: Windows 8 Disk Mirroring vs Intel Onboard

    - by Johnny W
    So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

    Read the article

  • Is there way to scan a registry hive on an attached USB drive?

    - by johnny
    I have a hard drive with a virus that I removed from a PC. I can scan the file system of it as an attached USB drive. But how do I scan the registry of that USB drive since it is not booted up like a regular hard drive? Thank you EDIT: To clarify, the USB drive was a regular hard drive in a PC that got infected. I cannot boot into the OS to run a scan. I removed it to attach it to a working PC so I can scan its file system. But, I cannot scan the registry of that hard drive because that drive is not booted up. The hard drive was a regular XP hard drive install that I removed to scan as an attached drive (with an adapter to make it a USB drive.)

    Read the article

  • Configuring permissions with Bastille

    - by Lucio
    I was using Bastille to improve the security of OS and I found the next question there I don't know if I should answer for YES or NOT: Questions: Would you like to set more restrictive permissions on the administration utilities? Explanation: In general, the default file permissions set by most vendors are fairly secure. To make them more secure, though, you can remove non-root user access to some administrator functions. If you choose this option, you'll be changing the permissions on some common system administration utilities so that they're not readable or executable by users other than root. These utilities (which include linuxconf, fsck, ipconfig, runlevel and portmap) are ones that most users could never have a need to access. This option will increase your system security, but there's a chance it will inconvenience your users. My users: When I installed Ubuntu I had create a user (admin), then I was able to create another user (people) but I cannot change the permissions of this user. Questions: The user there I am using like admin it's not the root, right? The effects of this option will affect to the two users (admin & people) or just to people?

    Read the article

  • How would I batch rename a lot of files using command-line?

    - by Whisperity
    I have a problem which I am unable to solve: I need to rename a great dump of files using patterns. I tried using this, but I always get an error. I have a folder, inside with a lot of files. Running ls -1 | wc -l, it returns that I have like 160000 files inside. The problem is, that I wish to move these files to a Windows system, but most of them have characters like : and ? in them, which makes the file unaccessible on said Windows-based systems. (As a "do not solve but deal with" method, I tried booting up a LiveCD on the Windows system and moving the files using the live OS. Under that Ubuntu, the files were readable and writable on the mounted NTFS partition, but when I booted back on Windows, it showed that the file is there but Windows was unable to access it in any fashion: rename, delete or open.) I tried running rename 's/\:/_' * inside the folder, but I got Argument list too long error. Some search revealed that it happens because I have so many files, and then I arrived here. The problem is that I don't know how to alter the command to suit my needs, as I always end up having various errors like Trying find -name '*:*' | xargs rename : _, it gives xargs: unmatched single quote; by default quotes are special to xargs unless you use the -0 option [\n] syntax error at (eval 1) line 1, near ":" [\n] xargs: rename: exited with status 255; aborting Adding the -0 after xargs turns the error message to xargs: argument line too long These files are archive files generated by various PHP scripts. The best solution would be having a chance to rename them before they are moved to Windows, but if there is no way to do it, we might have a way to rename the files while they are moved to Windows. I use samba and proftpd to move the files. Unfortunately, graphical software are out of the question as the server containing the files is what it is, a server, with only command-line interface.

    Read the article

  • How I disable "Safely remove hardware" in Windows 8?

    - by DarkGhostHunter
    I have a Marvell 91XX and I just updated to Windows 8. The problem I have with the latest drivers 1.0.2.1027 is the absence of "Policies" tab inside the Properties in the Device Manager, where I could disable de "Safely Remove Hardware". It was in Windows 7, but in the new version is not, so the OS shows my two hard disks has removable hardware and I can't do anything about it. Is gone forever? Is in another part? Or is not supported? PD: The best I can come up for a fix is to roll back to Windows 7, see if the option changes some regedit value, export, update to Windows 8 and import.

    Read the article

< Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >