Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 445/788 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Looking for detailed Instructions on building a DIY NAS

  - by Kaushik Gopal

  I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

  Read the article

• How do I recover from a Linux CentOS 4.6 Operating System Crash

  - by Greg Omebije

  Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

  Read the article

• Remote Desktop or Streaming Software/Services that Supports Gaming

  - by Griffin

  I've simply been amazed by the quality and speed of Onlive, as this technology has the potential of making hardware requirements irrelevant to the average user. However, at the moment Onlive is only for remotely controlling video games, and not desktops or other devices in general. I'm in pursuit of software or services that can accomplish this as well as Onlive does. I need: viewer (client) program portability (able to run on a USB stick) DirectX, OpenGL / full-screen game compatibility on the server side.** Gaming-acceptable color/scaling quality and responsiveness. I have a very powerful desktop at home and I want to be able to access this raw power from any other computer that I stick my USB into (in the same way Onlive gives gamers use of their powerful servers) What software/services has most of the above? NOTE: please specify what features your suggestion doesn't have.

  Read the article

• Can't resolve localhost on Mac OS X Server

  - by iainbeeston

  I have a server running OS X Server 10.5 and it can't resolve localhost to 127.0.0.1. When I try ping this is what happens: ping localhost ping: cannot resolve localhost: Unknown host SSH and web browsers get similar results (uknown host). If I try using 127.0.0.1 or the ip address assigned on the LAN all of the above work. Here's the contents of my /etc/hosts file: cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I have no local DNS service running. Does anyone have any idea why this might be happening or how I can fix it?

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• Handling Junk Email with Apple Mail.app and Gmail

  - by Axeva

  I've just setup my Apple Mail client to work with Google Apps through IMAP. One lingering question is how to best handle SPAM (Junk Mail), however. In their Help section, Google recommends that we disable junk filtering on the client. http://mail.google.com/support/bin/answer.py?answer=78892 This leads me to wonder what we should do when a junk message makes it past Google's filter? Do I just delete the message? If I do, the Google spam filter will never improve and "learn" that the message was junk. Do I have to log in to the web interface at Google to mark the message as spam? That seems a bit arduous for every spam email I get. What's the best way to handle this? Thanks!

  Read the article

• What are the licensing differences between Windows 8 Professional x64 fqc-05955 and fqc-05956?

  - by Razvan Panda

  If I do a search for Windows 8 Professional x64 in my country, the only version I can find is having the code fqc-05955 and is labeled OEM. If I perform same search on amazon.com, the only version I can find is having the code fqc-05956 and is labeled System Builder. There's not much information about licensing of Windows 8 that I could find. According to this article when using System Builder it can be transferred from one computer to another. What are the differences in licensing between those 2? Is fqc-05955 transferable from one hardware to another like System Builder is? Can I install fqc-05955 on a computer I already own that has no prior windows licensing? I am asking this, since many stores that sell fqc-05955 say it can only be bough with a computer. Thanks for your help!

  Read the article

• Error in using DBAN on HDD

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

  Read the article

• Parse HTTP requests through Wireshark?

  - by diogobaeder

  Hi, guys, Is there any way to parse HTTP request data in wireshark? For example, can I expose the request parameters upon an HTTP GET request (being sent by my machine), so that I don't need to read the (sometimes) truncated URL and find them by myself? I was using Tamper Data and Firebug, on my Firefox, to analyse these requests, but they're not as reliable as a stand-alone tool for monitoring my network interface, but wireshark keeps data too raw concerning HTTP flow. If you guys know any other stand-alone tool that does this (must be Linux-compatible), please tell me. Thanks!

  Read the article

• SAN newbie: What kind of fiber cables do I need to connect to the front end ports on my EMC CX300

  - by red888

  I have an old CX300 I'm messing with and I cant determine what kind of HBA\fiber cables I need to connect a server to the front end ports on the DPE2. The hardware reference doesn't give me any details and being new to FC-SAN all of the options are pretty overwhelming. I don't know if the ports are SC or LC or if it requires singlemode or multimode. Googling hasn't turned up anything for me either. All I know is that it supports 2GB Fiber. Here is a pic of one the modules. You can clearly see the front-end ports (FE)

  Read the article

• How to change the fonts used in Foxit Reader?

  - by user982438

  I really want to use Foxit Reader as my default PDF reader for its Tab Interface, and low memory footprint. Having tried mutiple times over the years the only thing that is stopping me are the Fonts. PDF in Adobe Reader looks Regular, but PDF Rendered in Foxit Looks Ugly. Would this solution works in Chrome as well? Since i record Chrome is using Foxit Reader as its embedded PDF engine. And is there any reasons why Fonts are used differently in Adobe and Foxit Reader?

  Read the article

• Kannel step-by-step installation tutorial

  - by user1410971

  I've been trying to install Kannel opensource gateway for sending free sms on my computer. But I never managed to make it work by reading the guide from the official website. So I'm starting over and interested in all information I can get. What hardware do I need? Can I install it on Ubuntu 12.04? Could someone post a link of a good tutorial, or write one here on step-by-step Kannel installation. Edit: Also, an example of sms sending using a php script would be appreciated. Thanks in advance :)

  Read the article

• IP route ppp0 + eth0 access to outside network

  - by Vitor

  I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

  Read the article

• Why doesn’t windows explorer show my removable / USB drive even though the command prompt does ?

  - by Gishu

  I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

  Read the article

• RAMDiskVE keeps causing computer to freeze

  - by Steph

  I found this in the Event Viewer logs: The description for Event ID 11 from source RAMDiskVE cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. Which doesn't say much. The details don't reveal much more: Failed to read configuration information from registry. 0000000002002C00000000000B0007C0000000000000000000000000000000000000000000000000 So my question is, what is RAMDiskVE and what device is it for? Basically I'm trying to rule out hardware but I have no idea what's failing...

  Read the article

• dhcpd: varying vendor-class-identifier

  - by jessicah

  I'm having trouble selectively sending parameters in response to a DHCP Inform packet using groups (or even without, just using host declarations) for bootp stuff. My configuration file right now looks like: subnet 130.123.131.128 netmask 255.255.255.128 { allow unknown-clients; } host dev-mac-09 { option vendor-class-identifier "example-identifier"; hardware ethernet 10:9a:dd:51:ff:83; } If I put vendor-class-identifier in the global scope, using tcpdump I can see that the client receives the vendor class option successfully. If I take it out, and just keep it in the host scope (or group scope), the client never receives the option. Specifying option dhcp-parameter-request list 60 doesn't help either. I did try using a class definition inside a group, but then it applied even if the host wasn't a part of the group. As an aside, how do I get detailed logging? At least something to indicate what groups and things got used to generate the response to the client.

  Read the article

• Huawei b260a gsm modem not forwarding gre for pptp tunnel

  - by Priit

  I have a huawei gsm modem that does not want to let gre through. The goal is to connect into a pptp server thats behind the huawei. In the modems port forwarding settings theres a ready made profile for pptp (1723). After activating that the MS pptp test tools show that connection is being initiated but no gre packets make it to the server. After taking a closer look into the modems iptables rules theres nothing in there about gre. So I tried making gre rules manualy into forward and preroute chains without any success what so ever. As far as I can tell theres no ip_gre module present on the device is that needed for gre forwarding? Thats what I'm afraid of that it doesn't support gre in NAT but how would I turn it into a bridge? The wan interface is ppp0 so bridging it with eth0 would not work right? Is there some iptables rule I could use to make the modem let all the traffic just straight through?

  Read the article

• Windows 7 client can't connect to CentOS PPTP VPN

  - by Chris

  Have a Macintosh (10.8.2) that connects just fine to a CentOS 6.0 virtual private server (OpenVZ, with PPP added by the host) via PPTP. A Windows 7 Home Premium client (virtualized in Sun's Virtual Box), on the same computer, using the same Ethernet connection, cannot connect to the Linux VPN server. I have iptables disabled (for testing) on the Linux box. I have the Windows firewall turned off. /var/log/messages looks like this, for a Windows connection: Oct 12 18:44:30 production pptpd[1880]: CTRL: Client 66.104.246.168 control connection started Oct 12 18:44:30 production pptpd[1880]: CTRL: Starting call (launching pppd, opening GRE) Oct 12 18:44:30 production pppd[1881]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Oct 12 18:44:30 production pppd[1881]: pptpd-logwtmp: $Version$ Oct 12 18:44:30 production pppd[1881]: pppd options in effect: Oct 12 18:44:30 production pppd[1881]: debug#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: nologfd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: dump#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: plugin /usr/lib/pptpd/pptpd-logwtmp.so#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: require-mschap-v2#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: refuse-pap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: refuse-chap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: refuse-mschap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: name pptpd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: pptpd-original-ip 66.104.246.168#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: 115200#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: lock#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: local#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: novj#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: novjccomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: ipparam 66.104.246.168#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: proxyarp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: 192.168.97.1:192.168.97.10#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: nobsdcomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: require-mppe-128#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: mppe-stateful#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: pppd 2.4.5 started by root, uid 0 Oct 12 18:44:30 production pppd[1881]: Using interface ppp0 Oct 12 18:44:30 production pppd[1881]: Connect: ppp0 <--> /dev/pts/1 (At this point the Windows machine displays a dialog, reading: "Verifying user name and password...") Oct 12 18:45:00 production pppd[1881]: LCP: timeout sending Config-Requests Oct 12 18:45:00 production pppd[1881]: Connection terminated. Oct 12 18:45:00 production pppd[1881]: Modem hangup Oct 12 18:45:00 production pppd[1881]: Exit. Oct 12 18:45:00 production pptpd[1880]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Oct 12 18:45:00 production pptpd[1880]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Oct 12 18:45:00 production pptpd[1880]: CTRL: Client 66.104.246.168 control connection finished The Macintosh connecting looks like this in /var/log/messages: Oct 12 18:50:49 production pptpd[1920]: CTRL: Client 66.104.246.168 control connection started Oct 12 18:50:49 production pptpd[1920]: CTRL: Starting call (launching pppd, opening GRE) Oct 12 18:50:49 production pppd[1921]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Oct 12 18:50:49 production pppd[1921]: pptpd-logwtmp: $Version$ Oct 12 18:50:49 production pppd[1921]: pppd options in effect: Oct 12 18:50:49 production pppd[1921]: debug#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: nologfd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: dump#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: plugin /usr/lib/pptpd/pptpd-logwtmp.so#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: require-mschap-v2#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: refuse-pap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: refuse-chap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: refuse-mschap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: name pptpd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: pptpd-original-ip 66.104.246.168#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: 115200#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: lock#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: local#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: novj#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: novjccomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: ipparam 66.104.246.168#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: proxyarp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: 192.168.97.1:192.168.97.10#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: nobsdcomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: require-mppe-128#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: mppe-stateful#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: pppd 2.4.5 started by root, uid 0 Oct 12 18:50:49 production pppd[1921]: Using interface ppp0 Oct 12 18:50:49 production pppd[1921]: Connect: ppp0 <--> /dev/pts/1 Oct 12 18:50:52 production pppd[1921]: MPPE 128-bit stateless compression enabled Oct 12 18:50:52 production pppd[1921]: Unsupported protocol 'IPv6 Control Protocol' (0x8057) received Oct 12 18:50:52 production pppd[1921]: Unsupported protocol 'Apple Client Server Protocol Control' (0x8235) received Oct 12 18:50:52 production pppd[1921]: Cannot determine ethernet address for proxy ARP Oct 12 18:50:52 production pppd[1921]: local IP address 192.168.97.1 Oct 12 18:50:52 production pppd[1921]: remote IP address 192.168.97.10 Oct 12 18:50:52 production pppd[1921]: pptpd-logwtmp.so ip-up ppp0 chris 66.104.246.168 I'm baffled...

  Read the article

• Fine control over zoom and aspect ratio in VLC player

  - by ashh

  In VLC Player (v1.01), how do I zoom video and control aspect ratio with fine control, as is possible with Media Player Classic Home Cinema (MPCHC)? The standard zoom appears to only support double, normal, quarter size etc, not useful to me at all. An example: I play an older music video file that is in 4:3 aspect ratio. In MPCHC I can use the number pad to zoom in small increments until I have removed the left and right letterbox bars and the video fills the whole screen. I can also stretch and move the video in small increments until I am happy with the aspect ratio and position. I could continue using MPCHC, but I have two displays and really like VLC feature enabling full-screen video on the main screen and the VLC interface (menus etc) on the second. I have not found a way to do this on MPCHC, if anyone knows I'd also be interested to hear.

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• Errors reported by "powercfg -energy"

  - by Tim

  Running "powercfg -energy" under Windows 7 command line, I received a report with following three errors: System Availability Requests:Away Mode Request The program has made a request to enable Away Mode. Requesting Process \Device\HarddiskVolume2\Program Files\Windows Media Player\wmpnetwk.exe CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 49.25 Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. I was wondering for the first error, what does "enable away mode" mean? for the second, what utilization percentage of CPU is reasonable? for the third, what is "PCI Express Active-State Power Management (ASPM)"? How I can correct the three errors? Thanks and regards!

  Read the article

• Macbook pro asks me to "Service Battery"

  - by Uwe Honekamp

  A couple of weeks ago I checked the battery and at that point in time (after 160 load cycles) it still had a capacity of 5000 mAh. Today, my 2006 macbook pro tells me via the battery menu to "Service Battery". According to Coconut Battery the current capacity is only 1590 mAh. The corresponding help text suggests contacting an Apple Authorized Service Provider (AASP) to have the computer checked. Before I decide to throw money at the AASP I'd like to understand what the AASP could possibly do to eliminate the problem. Isn't it more likely that the battery simply broke at 160 cycles and needs to be replaced? Are there any means by software or firmware to influence battery behavior? Of course, the computer hardware might be broken but how could this result in the described effect? And yes, I'm currently trying a calibration cycle but I have some doubts that it will save the day.

  Read the article

• PEN daemon as load balancer, IIS web logs not showing true requester IPs

  - by Aszurom

  I have a Hercules vmware appliance, which is a micro-linux vm that runs the PEN daemon and acts as a server load-balancer. It takes any incoming request on the appliance's IP and routes it out to a number of alternate IPs. The logs of the daemon show the true IP of the browsers hitting the website. The logs of the websites themselves (iis 6 and 7) only show the requester IP as being that of the load balancer. The IT manager tells me that when we had a hardware appliance (serveriron XL) doing the load balancing, the web logs reflected the requester IPs accurately. Is there any way to get this resolved with the daemon, or will I be digging that out of the closet and plugging it back in?

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >