Search Results

Search found 16824 results on 673 pages for 'model binding'.

Page 458/673 | < Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Burn iTunes playlist to Audio Image

  - by MikeHoss

  I have Snow Leopard on an early model MacBook Pro. The CD Drive has been giving me fits the last few months -- I stick a blank CD in it, and it claims it's bad and spits it out. I can go through a pile of brand-new CD's and it will choose 1 out of 7 that it wants to use, even though all the CD's come from the same package. The rejected CD's work fine on a Linux machine I have. I need to burn an audio CD from iTunes and my thought was: Burn playlist to audio CD Image file (Red Book image?) Copy ISO file to Linux Machine Use Linux machine to burn audio image to a CD But looking around, it doesn't seem that iTunes on OSX will support this. I was wondering if anyone else has accomplished this.

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

• Manual TRIM Windows 7 on OCZ VERTEX 2 SATA II 2.5" SSD

  - by INTPnerd

  I have an OCZ VERTEX 2 SATA II 2.5" SSD with Windows 7 Professional installed on it. I am pretty sure TRIM is not working because my motherboard is the Asus M2N-SLI (not the Deluxe model) which does not support AHCI mode for the drive. Is there a utility that is compatible with this drive that I could possibly run once a day that would do something similar to a manual TRIM in order to keep the drive performance up? I could not find one specifically for this drive on the OCZ website. I did find a User-Initiated Garbage Collection wiper tool, but it is for a Vertex drive not Vertex 2. I tried to run it, but it said that wiper could not be run for all the drives on this system.

  Read the article

• My laptop suppose to have 6 GB ram but it's only 2 GB installed

  - by monablo

  My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

  Read the article

• Where can I find this HP modular keyboard or similar?

  - by Chaos Whistler

  I'm looking for an HP USB 104-Key Modular Keyboard with Detachable Number Pad (model number is DT530A, I believe), shown at this online store, where it's quite cheap but is sadly sold out. I've searched for hours on Google, and I've found several - the problem is they're Spanish or Greek keyboards but I need one in English (US keys preferred)! I would also be happy with a keyboard which is not exactly this but is similar, either with a detachable keypad or with no keypad at all, as long as the keyboard key layout and positioning is the same as on a standard keyboard. Can you help me find such a keyboard?

  Read the article

• Can I connect my ipod's earphones to my computer?

  - by user1361315

  My computer (recent model Dell z600) has 2 input devices on the front of the computer, 1 has an icon of headphones and the other is a Mic icon. When I plugin my earphones to the input device that has the headphones, and play some sound I don't hear anything from my earphones (sounds comes from built in speakers). I know when I plugin a USB headphone set, it switches over to those on but for some reason my earphones are not being picked up. Is it not compatible? Note: my earphones look similar to http://www.hdaccessory.com/catalog/reprearphone.jpg

  Read the article

• Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

  - by jpreed00

  The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• No sigal showing on LCD TV when Conects Leptop via VGA Cable [migrated]

  - by Amit Prajapati

  I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

  Read the article

• COUNTIFS over multiple worksheets

  - by Alison

  I am trying to make COUNTIFS go across two worksheets in the same excel file (Final Driver Forecast Model), just on different tabs. I need it to count if a driver returns between a certain time, then to put a 1 in that time slot. For example if a driver returns at 2:30 p.m. on the 27th, then the formula will put in a 1 in the July 27th slot from 2:00 p.m.-4:00 p.m. I have tried two different formulas the first is =COUNTIF3D(Bid Sheet '[1]Bid Sheet 1'!O4:O110,">="&B76,O4:O110,"<="&C76) This is looking at the worksheet called Bid Sheet 1 and the column O4 through O110 and deciding if the time fits in the time slot of B76 00:00 (12 a.m.) and C 76 2:00 a.m. The second formula I tried to do the exact same thing =COUNTIF3D(O4:O110,">="B76,O4:O110,"<="&C76,"FinalDriverForecastModel',Bid Sheet 1") Neither is working and they both give me #NAME? when I hit enter......What am I doing wrong?

  Read the article

• Can't run monitor at native 1080p resolution on Windows 7

  - by Rex

  I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

  Read the article

• TextPad printing to incorrect printer

  - by TecBrat

  I have tried to find an answer on Google, and searched SU, but have not found anything on this particular issue. I Looked for a setting in the TextPad menu and didn't see anything that seemed relevant. I have 2 networked printers that are the same model. (HP LaserJet 2200 Series PCL 5) One is near me and the other is across the building. The one near me is my default. It seems that TextPad remembers the last printer used and defaults to it rather than printing to the system default, so when I force it to print to my default printer once, the problem is solved until I decide to print to the other printer for some reason. If I don't remember the problem, and specifically print a job to the nearby printer to correct it, I'll end up either wasting paper or wasting trips across the building to pick up printjobs that got printed there by accident. Has anyone else noticed this problem? Is there a solution?

  Read the article

• Startech SVx41HDI Series Server Remote Control Usage Question - How do I switch away from a dead por

  - by tajh

  We have a Startech KVM over IP model SV841HDI and it was stuck pointing a port where the machine has been removed. We ended up having to physically plug something into that port in order to switch ports again, meaning that if someone in support accidentally switches to an empty port, we need to have a documented solution for making it useable again. The unit is old, no longer under warranty, firmware updates for it are no longer available (interestingly it runs a powerPC version of busybox). Since it does work well except for this one catch, we would like to avoid replacing it. Reading the manual, you have a several recommended methods. I tried them. Hit the left CTRL key a few times (as well as all the other popular KVM keys I could think of). The VNC GUI offers lots of buttons - none of them switch away from a dead port. The question is: how do I switch away from a dead port on this particular KVM remotely?

  Read the article

• How to make a quiet laptop ? [closed]

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be pdf/docs processing, real-time audio processing, web-surfing and skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend me any solution please? Thanks in advance!

  Read the article

• About Hard Disk Drive Docks

  - by Crossbrowser

  I'm thinking of buying a drive dock to put my unused large HDD to use. I will also probably use the dock to backup files and swap the drives regularly. I have a few questions though: Are they noisy? I plan to use them via USB (because I don't think I have eSata connectors), am I gonna want to kill myself every time I backup? (I know it's supposed to be 480 Mbps, but how realistic is this?) Do you recommend a particular model? (I was thinking about this Startech HDD dock) Thank you

  Read the article

• Laptop hot after format [migrated]

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Samba 4 or Active Directory

  - by Jon Rhoades

  Now that Samba 4 has finally been released we find ourselves in new position of having a choice of of either upgrading our Samba 3 domain to either a Samba 4 domain on Linux or a Windows AD domain on Windows 2012. Given that we are equally expert at managing Windows and Linux servers, is there any reason not to use Samba 4 over AD on Windows; specifically: Are there functional differences from a Windows/OS X client perspective? Are there issues with other services that use AD, such as storage appliances that use AD/Kerberos for authentication/authorisation. Will the Microsoft "System Centre" suite of tools and other similar products work seamlessly? How will Samba 4 handle AD's Multimaster DC model and FMSO roles. Are there any other issues to be aware of, such as vendor support?

  Read the article

• 7.0.1 and Photoshop openGL requirements

  - by mcgd

  Hi, I'm running Workstation 7.0.1 on a 64-bit Linux host, with a Vista guest, and the Aero theme works a treat - full marks for getting that working! However, when running Photoshop there are some operations (like interactive image rotation) that seem to require graphics support that VMWare doesn't have - attempting to do these operations returns an error that the functionality "only works with OpenGL enabled windows". It seems that it needs OpenGL 2.0 and Shader Model 3.0 which I gather are supported under Workstation 7 - do I need to put in additional settings of some kind? I've updated to the right version of VMWare Tools, and the video driver is listed as "VMWare SVGA 3D (Microsoft Corporation - WDDM)". I see that in 6.5 there was an option to switch between the beta WDDM driver and the SVGAII driver, but I assume the features of both of these would have been merged into the standard driver in 7.0? Thanks -Matthew

  Read the article

• How can the shared hosting server provide unlimited physical subdomains as opposed to unlimited virtual subdomains?

  - by xport

  Some hosting companies offer unlimited subdomains. There are two kind of subdomains: physical subdomains and virtual subdomains. A physical subdomains has its own site directory rather than being nested inside the site directory of its parent domain. A virtual subdomain site directory, on the other hand, is nested inside the site directory of its parent domain. I wonder how can the shared hosting company provide unlimited (theoritically) physical subdomains? In my understanding, each physical subdomain represents a new site (rather than a new application or virtual directory) in IIS. Please correct me if my mental model is wrong.

  Read the article

• Ranking tables from Excel data

  - by Joe

  Hi all (asking here because this meta question told me to). I have some data in an excel spreadsheet here. It's no more than a table with about five columns. Year Purchased Manufacturer Model Num Unit Price Total Price 2007 SMARTBOX FuturePad XP 1 £2,915.00 £2,915.00 2007 Attainment Company Inc Go Talk 9+ 1 £104.00 £104.00 2007 Attainment Company Inc Go Talk 20+ 1 £114.00 £114.00 I'd like to be able to build a 'top ten' of either manufacturers or models (and I'd like to be able to do it by either most mentioned, most sales, or highest value of sales) - but I've got no idea what the best method is in excel. Any suggestions...? The ideal output might be a set of sells that says something like Company Units A 5342 B 232 C 2 D 1

  Read the article

• Any examples of a complex, changeable system modelled with a spreadsheet?

  - by andygrunt

  When I asked this question using games as the example (hoping it would be more likely to have been done), it was closed as being off topic so let me ask it this way... Has anyone used a spreadsheet to model a complex, changeable system (something like crowd behaviour, weather systems, a closed ecology, evolution or whatever) and if so, can you point me at it? I'm hoping for a normal (albeit complex) spreadsheet using the spready's inbuilt formulae and functions rather than something specially coded. I'm also after something where it's possible to change the variables and see the changed outcome - perhaps the variables change using random numbers or the like.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• MacBook repeatedly disconnects from WiFi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4GHz). The WiFi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without issue. The problem also seemingly becomes more pronounced after midnight. Any ideas as to what the problem could be?

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

< Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >