Search Results

Search found 11954 results on 479 pages for 'gets'.

Page 465/479 | < Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >

  • Who writes the words? A rant with graphs.

    - by Roger Hart
    If you read my rant, you'll know that I'm getting a bit of a bee in my bonnet about user interface text. But rather than just yelling about the way the world should be (short version: no UI text would suck), it seemed prudent to actually gather some data. Rachel Potts has made an excellent first foray, by conducting a series of interviews across organizations about how they write user interface text. You can read Rachel's write up here. She presents the facts as she found them, and doesn't editorialise. The result is insightful, but impartial isn't really my style. So here's a rant with graphs. My method, and how it sucked I sent out a short survey. Survey design is one of my hobby-horses, and since some smartarse in the comments will mention it if I don't, I'll step up and confess: I did not design this one well. It was potentially ambiguous, implicitly excluded people, and since I only really advertised it on Twitter and a couple of mailing lists the sample will be chock full of biases. Regardless, these were the questions: What do you do? Select the option that best describes your role What kind of software does your organization make? (optional) In your organization, who writes the text on your software user interfaces? (for example: button names, static text, tooltips, and so on) Tick all that apply. In your organization who is responsible for user interface text? Who "owns" it? The most glaring issue (apart from question 3 being a bit broken) was that I didn't make it clear that I was asking about applications. Desktop, mobile, or web, I wouldn't have minded. In fact, it might have been interesting to categorize and compare. But a few respondents commented on the seeming lack of relevance, since they didn't really make software. There were some other issues too. It wasn't the best survey. So, you know, pinch of salt time with what follows. Despite this, there were 100 or so respondents. This post covers the overview, and you can look at the raw data in this spreadsheet What did people do? Boring graph number one: I wasn't expecting that. Given I pimped the survey on twitter and a couple of Tech Comms discussion lists, I was more banking on and even Content Strategy/Tech Comms split. What the "Others" specified: Three people chipped in with Technical Writer. Author, apparently, doesn't cut it. There's a "nobody reads the instructions" joke in there somewhere, I'm sure. There were a couple of hybrid roles, including Tech Comms and Testing, which sounds gruelling and thankless. There was also, an Intranet Manager, a Creative Director, a Consultant, a CTO, an Information Architect, and a Translator. That's a pretty healthy slice through the industry. Who wrote UI text? Boring graph number two: Annoyingly, I made this a "tick all that apply" question, so I can't make crude and inflammatory generalizations about percentages. This is more about who gets involved in user interface wording. So don't panic about the number of developers writing UI text. First off, it just means they're involved. Second, they might be good at it. What? It could happen. Ours are involved - they write a placeholder and flag it to me for changes. Sometimes I don't make any. It's also not surprising that there's so much UX in the mix. Some of that will be people taking care, and crafting an understandable interface. Some of it will be whatever text goes on the wireframe making it into production. I'm going to assume that's what happened at eBay, when their iPhone app purportedly shipped with the placeholder text "Some crappy content goes here". Ahem. Listing all 17 "other" responses would make this post lengthy indeed, but you can read them in the raw data spreadsheet. The award for the approach that sounds the most like a good idea yet carries the highest risk of ending badly goes to whoever offered up "External agencies using focus groups". If you're reading this, and that actually works, leave a comment. I'm fascinated. Who owned UI text Stop. Bar chart time: Wow. Let's cut to the chase, and by "chase", I mean those inflammatory generalizations I was talking about: In around 60% of cases the person responsible for user interface text probably lacks the relevant expertise. Even in the categories I count as being likely to have relevant skills (Marketing Copywriters, Content Strategists, Technical Authors, and User Experience Designers) there's a case for each role being unsuited, as you'll see in Rachel's blog post So it's not as simple as my headline. Does that mean that you personally, Mr Developer reading this, write bad button names? Of course not. I know nothing about you. It rather implies that as a category, the majority of people looking after UI text have neither communication nor user experience as their primary skill set, and as such will probably only be good at this by happy accident. I don't have a way of measuring those frequency of those accidents. What the Others specified: I don't know who owns it. I assume the project manager is responsible. "copywriters" when they wish to annoy me. the client's web maintenance person, often PR or MarComm That last one chills me to the bone. Still, at least nobody said "the work experience kid". You can see the rest in the spreadsheet. My overwhelming impression here is of user interface text as an unloved afterthought. There were fewer "nobody" responses than I expected, and a much broader split. But the relative predominance of developers owning and writing UI text suggests to me that organizations don't see it as something worth dedicating attention to. If true, that's bothersome. Because the words on the screen, particularly the names of things, are fundamental to the ability to understand an use software. It's also fascinating that Technical Authors and Content Strategists are neck and neck. For such a nascent discipline, Content Strategy appears to have made a mark on software development. Or my sample is skewed. But it feels like a bit of validation for my rant: Content Strategy is eating Tech Comms' lunch. That's not a bad thing. Well, not if the UI text is getting done well. And that's the caveat to this whole post. I couldn't care less who writes UI text, provided they consider the user and don't suck at it. I care that it may be falling by default to people poorly disposed to doing it right. And I care about that because so much user interface text sucks. The most interesting question Was one I forgot to ask. It's this: Does your organization have technical authors/writers? Like a lot of survey data, that doesn't tell you much on its own. But once we get a bit dimensional, it become more interesting. So taken with the other questions, this would have let me find out what I really want to know: What proportion of organizations have Tech Comms professionals but don't use them for UI text? Who writes UI text in their place? Why this happens? It's possible (feasible is another matter) that hundreds of companies have tech authors who don't work on user interfaces because they've empirically discovered that someone else, say the Marketing Copywriter, is better at it. And once we've all finished laughing, I'll point out that I've met plenty of tech authors who just aren't used to thinking about users at the point of need in the way UI text and embedded user assistance require. If you've got what I regard, perhaps unfairly, as the bad kind of tech author - the old-school kind with the thousand-page pdf and the grammar obsession - if you've got one of those then you probably are better off getting the UX folk or the copywriters to do your UI text. At the very least, they'll derive terminology from user research.

    Read the article

  • jQuery CSS Property Monitoring Plug-in updated

    - by Rick Strahl
    A few weeks back I had talked about the need to watch properties of an object and be able to take action when certain values changed. The need for this arose out of wanting to build generic components that could 'attach' themselves to other objects. One example is a drop shadow - if I add a shadow behavior to an object I want the shadow to be pinned to that object so when that object moves I also want the shadow to move with it, or when the panel is hidden the shadow should hide with it - automatically without having to explicitly hook up monitoring code to the panel. For example, in my shadow plug-in I can now do something like this (where el is the element that has the shadow attached and sh is the shadow): if (!exists) // if shadow was created el.watch("left,top,width,height,display", function() { if (el.is(":visible")) $(this).shadow(opt); // redraw else sh.hide(); }, 100, "_shadowMove"); The code now monitors several properties and if any of them change the provided function is called. So when the target object is moved or hidden or resized the watcher function is called and the shadow can be redrawn or hidden in the case of visibility going away. So if you run any of the following code: $("#box") .shadow() .draggable({ handle: ".blockheader" }); // drag around the box - shadow should follow // hide the box - shadow should disappear with box setTimeout(function() { $("#box").hide(); }, 4000); // show the box - shadow should come back too setTimeout(function() { $("#box").show(); }, 8000); This can be very handy functionality when you're dealing with objects or operations that you need to track generically and there are no native events for them. For example, with a generic shadow object that attaches itself to any another element there's no way that I know of to track whether the object has been moved or hidden either via some UI operation (like dragging) or via code. While some UI operations like jQuery.ui.draggable would allow events to fire when the mouse is moved nothing of the sort exists if you modify locations in code. Even tracking the object in drag mode this is hardly generic behavior - a generic shadow implementation can't know when dragging is hooked up. So the watcher provides an alternative that basically gives an Observer like pattern that notifies you when something you're interested in changes. In the watcher hookup code (in the shadow() plugin) above  a check is made if the object is visible and if it is the shadow is redrawn. Otherwise the shadow is hidden. The first parameter is a list of CSS properties to be monitored followed by the function that is called. The function called receives this as the element that's been changed and receives two parameters: The array of watched objects with their current values, plus an index to the object that caused the change function to fire. How does it work When I wrote it about this last time I started out with a simple timer that would poll for changes at a fixed interval with setInterval(). A few folks commented that there are is a DOM API - DOMAttrmodified in Mozilla and propertychange in IE that allow notification whenever any property changes which is much more efficient and smooth than the setInterval approach I used previously. On browser that support these events (FireFox and IE basically - WebKit has the DOMAttrModified event but it doesn't appear to work) the shadow effect is instant - no 'drag behind' of the shadow. Running on a browser that doesn't support still uses setInterval() and the shadow movement is slightly delayed which looks sloppy. There are a few additional changes to this code - it also supports monitoring multiple CSS properties now so a single object can monitor a host of CSS properties rather than one object per property which is easier to work with. For display purposes position, bounds and visibility will be common properties that are to be watched. Here's what the new version looks like: $.fn.watch = function (props, func, interval, id) { /// <summary> /// Allows you to monitor changes in a specific /// CSS property of an element by polling the value. /// when the value changes a function is called. /// The function called is called in the context /// of the selected element (ie. this) /// </summary> /// <param name="prop" type="String">CSS Properties to watch sep. by commas</param> /// <param name="func" type="Function"> /// Function called when the value has changed. /// </param> /// <param name="interval" type="Number"> /// Optional interval for browsers that don't support DOMAttrModified or propertychange events. /// Determines the interval used for setInterval calls. /// </param> /// <param name="id" type="String">A unique ID that identifies this watch instance on this element</param> /// <returns type="jQuery" /> if (!interval) interval = 200; if (!id) id = "_watcher"; return this.each(function () { var _t = this; var el$ = $(this); var fnc = function () { __watcher.call(_t, id) }; var itId = null; var data = { id: id, props: props.split(","), func: func, vals: [props.split(",").length], fnc: fnc, origProps: props, interval: interval }; $.each(data.props, function (i) { data.vals[i] = el$.css(data.props[i]); }); el$.data(id, data); hookChange(el$, id, data.fnc); }); function hookChange(el$, id, fnc) { el$.each(function () { var el = $(this); if (typeof (el.get(0).onpropertychange) == "object") el.bind("propertychange." + id, fnc); else if ($.browser.mozilla) el.bind("DOMAttrModified." + id, fnc); else itId = setInterval(fnc, interval); }); } function __watcher(id) { var el$ = $(this); var w = el$.data(id); if (!w) return; var _t = this; if (!w.func) return; // must unbind or else unwanted recursion may occur el$.unwatch(id); var changed = false; var i = 0; for (i; i < w.props.length; i++) { var newVal = el$.css(w.props[i]); if (w.vals[i] != newVal) { w.vals[i] = newVal; changed = true; break; } } if (changed) w.func.call(_t, w, i); // rebind event hookChange(el$, id, w.fnc); } } $.fn.unwatch = function (id) { this.each(function () { var el = $(this); var fnc = el.data(id).fnc; try { if (typeof (this.onpropertychange) == "object") el.unbind("propertychange." + id, fnc); else if ($.browser.mozilla) el.unbind("DOMAttrModified." + id, fnc); else clearInterval(id); } // ignore if element was already unbound catch (e) { } }); return this; } There are basically two jQuery functions - watch and unwatch. jQuery.fn.watch(props,func,interval,id) Starts watching an element for changes in the properties specified. props The CSS properties that are to be watched for changes. If any of the specified properties changes the function specified in the second parameter is fired. func (watchData,index) The function fired in response to a changed property. Receives this as the element changed and object that represents the watched properties and their respective values. The first parameter is passed in this structure:    { id: itId, props: [], func: func, vals: [] }; A second parameter is the index of the changed property so data.props[i] or data.vals[i] gets the property value that has changed. interval The interval for setInterval() for those browsers that don't support property watching in the DOM. In milliseconds. id An optional id that identifies this watcher. Required only if multiple watchers might be hooked up to the same element. The default is _watcher if not specified. jQuery.fn.unwatch(id) Unhooks watching of the element by disconnecting the event handlers. id Optional watcher id that was specified in the call to watch. This value can be omitted to use the default value of _watcher. You can also grab the latest version of the  code for this plug-in as well as the shadow in the full library at: http://www.west-wind.com:8080/svn/jquery/trunk/jQueryControls/Resources/ww.jquery.js watcher has no other dependencies although it lives in this larger library. The shadow plug-in depends on watcher.© Rick Strahl, West Wind Technologies, 2005-2011

    Read the article

  • CodePlex Daily Summary for Friday, October 21, 2011

    CodePlex Daily Summary for Friday, October 21, 2011Popular ReleasesCodekicker.BBCode: CodeKicker.BBCode-Parser-5.0: This is the best and newest version.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0Umbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...thinktecture IdentityServer: IdentityServer RC: This is the RC of Thinktecture.IdentityServerWebForms.ControlExtender: WebForms.ControlExtender 1.0.0.0 (binary): Initial release.Windows Phone 7 Skydrive Library: Skydrive WP7 rel. 1: Till the Rest Api gets out of beta you can use this release You can: - browse the folders -download files It uses WebDAVVkontakte WP: Vkontakte: source codeDotNet.Framework.Common: DotNetFramework.Common?????: DotNetFramework.Common?????Way2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.Naked Objects: Naked Objects Release 4.0.110.0: Corresponds to the packaged version 4.0.110.0 available via NuGet. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wish to re-build the framework, consul the file HowToBuild.txt in the release. Documentation Please note that after ...myCollections: Version 1.5: New in this version : Added edit type for selected elements Added clean for selected elements Added Amazon Italia Added Amazon China Added TVDB Italia Added TVDB China Added Turkish language You can now manually add artist Added Order by Rating Improved Add by Media Improved Artist Detail Upgrade Sqlite engine View, Zoom, Grouping, Filter are now saved by category Added group by Artist Added CubeCover View BugFixingFacebook C# SDK: 5.3: This is a BETA release which adds new features and bug fixes to v5.2.1. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ added support for early preview for .NET 4.5 added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added new CS-WinForms-AsyncAwait.sln sample demonstrating the use of async/await, upload progress report using IProgress<T> and cancellation support Query/QueryAsync methods uses graph api instead...IronPython: 2.7.1 RC: This is the first release candidate of IronPython 2.7.1. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. If there are no showstopping issues, this will be the only release candidate for 2.7.1, so please speak up if you run into any roadblocks. The highlights of 2.7.1 are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython To...Rawr: Rawr 4.2.6: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...Home Access Plus+: v7.5: Change Log: New Booking System (out of Beta) New Help Desk (out of Beta) New My Files (Developer Preview) Token now saved into Cookie so the system doesn't TIMEOUT as much File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.data.dll ~/bin/hap.web.configuration.dll ~/bookingsystem/admin/default.aspx ~/bookingsystem/default.aspx REMOVED ~/bookingsystem/bookingpopup.ascx REMOVED ~/bookingsystem/daylist.ascx REMOVED ~/bookingsystem/new.aspx ~/helpdesk/default.aspx ...Visual Micro - Arduino for Visual Studio: Arduino for Visual Studio 2008 and 2010: Arduino for Visual Studio 2010 has been extended to support Visual Studio 2008. The same functionality and configuration exists between the two versions. The 2010 addin runs .NET4 and the 2008 addin runs .NET3.5, both are installed using a single msi and both share the same configuration settings. The only known issue in 2008 is that the button and menu icons are missing. Please logon to the visual micro forum and let us know if things are working or not. Read more about this Visual Studio ...DotSpatial: Release: Moved IExtension to a separate assembly.Phalanger - The PHP Language Compiler for the .NET Framework: 2.1 (October 2011) for .NET 4.0: October 2011 release of Phalanger - the PHP compiler for .NET 4.0 - introduces following: Performance enhancements several duplicitous runtime checks omitted New functionality 31586 __toString() magic method compile time check hash_update_stream() supports second argument Issue fixes 31455 PCRE named groups addcslashes() with second argument fix 31577 31575, 31567 31566 31484 Note if you need Phalanger running on .NET 2.0, please use Phalanger 2.0. For the full list of cha...New Projects#foo SqlServer: Useful Sql Server extensionsBaufQuery: Material de la presentación que voy a realizar en Baufest sobre jQueryBoringColorPicker: A simple color picker i created on a busy Saturday morning, and i couldn't stress myself calculating color codes. I hope someone finds it useful. Developed in c#, for desktop use.Charity Social Network1: ????? ??? ?????? ??? ?????2 devianARTGallery: <devianART Gallery> makes it easier for <artist, graphic designer, art, web designer, interface design> to<following news images, graphics, vectors and new resouces for your needs at this application in your hands>. It's developing in<C# windows phone 7>Diving: MVC Application for testingDotNet.Framework.Common: .NET ??????????Drama-AddictFeed: Retrieve feed a top siteDuckWorld: Logica architect courseEasy Monitor: ??ASP.NET_MVC4???????????????,????。 Server, Monitoring, ASP.net, mvc, mvc4, svg, vml, KVDB, WebsiteEvent_Manager: Event Manager V 2FETCH! Go Fetch that remote task. Good task doogie!: Email sent, task accomplished. This little task execution agent can be a remote domain support's best friend. Save time on late night and off hours administration tasks. When there is no time to RDP, send Fetch an email and he'll take care of it quick. Secure, reliable. InQuestaRed UTN: Proyecto de UTNInsert from Windows Live Image Search: Allows you to do an image search using Windows Live Search and put the resulting image into a blog entry.ioak: iOakLibertyJournal free diary journal software: LibertyJournal - A freeware personal diary software/journal software/program, could become your personal digital diary and journal software to record your daily events and memories, in your creative words. Runs on Desktop PCs, and Netbooks too.memcachedext - .NET library: A .NET library providing support for advanced caching scenarios, including memcached server.myWebfetion: my web fetionNuMetaheuristics: NuMetaheuristics is a general framework for optimization developed in C#. It is capable of supporting any optimization paradigm (local search, naturally inspired, multi-objective, etc.). It supports extensions to allow for new genotypes, operators, and algorithms.Oil Prices: Application about Thailand's oil pricesOnline Ontology Editor: Online Ontology BuilderOrchard Documentation: Orchard Documentation repository.QuipuxConnector: QuipuxConnector es el primer Addins para word que permite enviar documentos a QuipuxSignature Recognition: An application that authenticates scanned signature images.SmartFramework: SmartFramework là n?n t?ng xây d?ng các h? th?ng l?n connect t?i các ngu?n CSDL khác nhau, d?c bi?t là các h? th?ng online, real-time.smartKin: Studienarbeit TIT 09 - Kinect / Robotik Zum räumlichen Sehen von Robotern mit Kinect: Initiale Experimente für 3D-Szenen Rekonstruktion, Steuerung durch natürliche GestenTAudioPlayer: TAudioPlayer would take more facility in your aural comprehension exercise. It most conspicuous function is comfortably add time-tags to an audio file which is playing and you can jump to the position you defined easily. It also provides various hotkey setting and you can define most of the operation hotkey by yourself. The project is developed in C# with Visual Studio 2010.Watin - TestEasy: WatiN - TestEasy is the idea to make WatiN based test generation and excution easier. Mainly it will provide interface to data driven automation using WatiN.WebForms.ControlExtender: WebForms.ControlExtender simplify the creation of components which extend (or adds) their own properties to other controls or components in the Visual Studio ASP.NET designer.Windows Phone 7 Skydrive Library: Use this library if you need to access Skydrive from Windows PhonezDBA: SQL Server 2008 tookit!

    Read the article

  • ASP.NET: Building tree picker dialog using jQuery UI and TreeView control

    - by DigiMortal
    Selecting things from dialogs and data represented as trees are very common things we see in business applications. In this posting I will show you how to use ASP.NET TreeView control and jQuery UI dialog component to build picker dialog that hosts tree data. Source code You can find working example with source code from my examples repository in GitHub. Please feel free to give me feedback about my examples. Source code repository GitHub Building dialog box As I don’t like to invent wheels then I will use jQuery UI to solve the question related to dialogs. If you are not sure how to include jQuery UI to your page then take a look at source code - GitHub also allows you to browse files without downloading them. I add some jQuery based JavaScript to my page head to get dialog and button work. <script type="text/javascript">     $(function () {         $("#dialog-form").dialog({             autoOpen: false,             modal: true         });         $("#pick-node")             .button()             .click(function () {                 $("#dialog-form").dialog("open");                 return false;             });     }); </script> Here is the mark-up of our form’s main content area. <div id="dialog-form" title="Select node">     <asp:TreeView ID="TreeView1" runat="server" ShowLines="True"          ClientIDMode="Static" HoverNodeStyle-CssClass="SelectedNode">         <Nodes>             <asp:TreeNode Text="Root" Value="Root">                 <asp:TreeNode Text="Child1" Value="Child1">                     <asp:TreeNode Text="Child1.1" Value="Child1.1" />                     <asp:TreeNode Text="Child1.2" Value="Child1.2" />                 </asp:TreeNode>                 <asp:TreeNode Text="Child2" Value="Child2">                     <asp:TreeNode Text="Child2.1" Value="Child2.1" />                     <asp:TreeNode Text="Child2.2" Value="Child2.2" />                 </asp:TreeNode>             </asp:TreeNode>         </Nodes>     </asp:TreeView>     &nbsp; </div> <button id="pick-node">Pick user</button> Notice that our mark-up is very compact for what we will achieve. If you are going to use it in some real-world application then this mark-up gets even shorter – I am sure that in most cases the data you display in TreeView comes from database or some domain specific data source. Hacking TreeView TreeView needs some little hacking to make it work as client-side component. Be warned that if you need more than I show you here you need to write a lot of JavaScript code. For more advanced scenarios I suggest you to use some jQuery based tree component. This example works for you if you need something done quickly. Number one problem is getting over the postbacks because in our scenario postbacks only screw up things. Also we need to find a way how to let our client-side code to know that something was selected from TreeView. We solve these to problems at same time: let’s move to JavaScript links. We have to make sure that when user clicks the node then information is sent to some JavaScript function. Also we have to make sure that this function returns something that is not processed by browser. My function is here. <script type="text/javascript">     function         $("#dialog-form").dialog("close");         alert("You selected: " + value + " - " + text);         return undefined;     } </script> Notice that this function returns undefined. You get the better idea why I did so if you look at server-side code that corrects NavigateUrl properties of TreeView nodes. protected override void OnPreRender(EventArgs e) {     base.OnPreRender(e);                 if (IsPostBack)         return;     SetSelectNodeUrls(TreeView1.Nodes); } private void SetSelectNodeUrls(TreeNodeCollection nodes) {     foreach (TreeNode node in nodes)     {         node.NavigateUrl = "javascript:selectNode('" + node.Value +                             "','" + node.Text + "');";         SetSelectNodeUrls(node.ChildNodes);     }        } Now we have TreeView that renders nodes the way that postback doesn’t happen anymore. Instead of postback our callback function is used and provided with selected values. In this function we are free to use node text and value as we like. Result I applied some more bells and whistles and sample data to source code to make my sample more informative. So, here is my final dialog box. Seems very basic but it is not hard to make it look more professional using style sheets. Conclusion jQuery components and ASP.NET controls have both their strong sides and weaknesses. In this posting I showed you how you can quickly produce good results when combining jQuery  and ASP.NET controls without pushing to the limits. We used simple hack to get over the postback issue of TreeView control and we made it work as client-side component that is initialized in server. You can find many other good combinations that make your UI more user-friendly and easier to use.

    Read the article

  • Introduction to Extended Events

    - by extended_events
    For those fighting with all the Extended Event terminology, let's step back and have a small overall Introduction to Extended Events. This post will give you a simplified end to end view through some of the elements in Extended Events. Before we start, let’s review the first Extented Events that we are going to use: -          Events: The SQL Server code is populated with event calls that, by default, are disabled. Adding events to a session enables those event calls. Once enabled, they will execute the set of functionality defined by the session. -          Target: This is an Extended Event Object that can be used to log event information. Also it is important to understand the following Extended Event concept: -          Session: Server Object created by the user that defines functionality to be executed every time a set of events happen.   It’s time to write a small “Hello World” using Extended Events. This will help understand the above terms. We will use: -          Event sqlserver. error_reported: This event gets fired every time that an error happens in the server. -          Target package0.asynchronous_file_target: This target stores the event data in disk. -          Session: We will create a session that sends all the error_reported events to the ring buffer. Before we get started, a quick note: Don’t run this script in a production environment. Even though, we are going just going to be raise very low severity user errors, we don't want to introduce noise in our servers. -- TRIES TO ELIMINATE PREVIOUS SESSIONS BEGIN TRY       DROP EVENT SESSION test_session ON SERVER END TRY BEGIN CATCH END CATCH GO   -- CREATES THE SESSION CREATE EVENT SESSION test_session ON SERVER ADD EVENT sqlserver.error_reported ADD TARGET package0.asynchronous_file_target -- CONFIGURES THE FILE TARGET (set filename = 'c:\temp\data1.xel' , metadatafile = 'c:\temp\data1.xem') GO   -- STARTS THE SESSION ALTER EVENT SESSION test_session ON SERVER STATE = START GO   -- GENERATES AN ERROR RAISERROR (N'HELLO WORLD', -- Message text.            1, -- Severity,            1, 7, 3, N'abcde'); -- Other parameters GO   -- STOPS LISTENING FOR THE EVENT ALTER EVENT SESSION test_session ON SERVER STATE = STOP GO   -- REMOVES THE EVENT SESSION FROM THE SERVER DROP EVENT SESSION test_session ON SERVER GO -- REMOVES THE EVENT SESSION FROM THE SERVER select CAST(event_data as XML) as event_data from sys.fn_xe_file_target_read_file ('c:\temp\data1*.xel','c:\temp\data1*.xem', null, null) This query will output the event data with our first hello world in the Extended Event format: <event name="error_reported" package="sqlserver" id="100" version="1" timestamp="2010-02-27T03:08:04.210Z"><data name="error"><value>50000</value><text /></data><data name="severity"><value>1</value><text /></data><data name="state"><value>1</value><text /></data><data name="user_defined"><value>true</value><text /></data><data name="message"><value>HELLO WORLD</value><text /></data></event> More on parsing event data in this post: Reading event data 101 Now let's move that lets move on to the other three Extended Event objects: -          Actions. This Extended Objects actions get executed before events are published (stored in buffers to be transferred to the targets). Currently they are used additional data (like the TSQL Statement related to an event, the session, the user) or generate a mini dump.   -          Predicates: Predicates express are logical expressions that specify what predicates to fire (E.g. only listen to errors with a severity greater than 16). This are composed of two Extended Objects: o   Predicate comparators: Defines an operator for a pair of values. Examples: §  Severity > 16 §  error_message = ‘Hello World!!’ o   Predicate sources: These are values that can be also used by the predicates. They are generic data that isn’t usually provided in the event (similar to the actions). §  Sqlserver.username = ‘Tintin’ As logical expressions they can be combined using logical operators (and, or, not).  Note: This pair always has to be first an event field or predicate source and then a value         Let’s do another small Example. We will trigger errors but we will use the ones that have severity >= 10 and the error message != ‘filter’. To verify this we will use the action sql_text that will attach the sql statement to the event data: -- TRIES TO ELIMINATE PREVIOUS SESSIONS BEGIN TRY       DROP EVENT SESSION test_session ON SERVER END TRY BEGIN CATCH END CATCH GO   -- CREATES THE SESSION CREATE EVENT SESSION test_session ON SERVER ADD EVENT sqlserver.error_reported       (ACTION (sqlserver.sql_text) WHERE severity = 2 and (not (message = 'filter'))) ADD TARGET package0.asynchronous_file_target -- CONFIGURES THE FILE TARGET (set filename = 'c:\temp\data2.xel' , metadatafile = 'c:\temp\data2.xem') GO   -- STARTS THE SESSION ALTER EVENT SESSION test_session ON SERVER STATE = START GO   -- THIS EVENT WILL BE FILTERED BECAUSE SEVERITY != 2 RAISERROR (N'PUBLISH', 1, 1, 7, 3, N'abcde'); GO -- THIS EVENT WILL BE FILTERED BECAUSE MESSAGE = 'FILTER' RAISERROR (N'FILTER', 2, 1, 7, 3, N'abcde'); GO -- THIS ERROR WILL BE PUBLISHED RAISERROR (N'PUBLISH', 2, 1, 7, 3, N'abcde'); GO   -- STOPS LISTENING FOR THE EVENT ALTER EVENT SESSION test_session ON SERVER STATE = STOP GO   -- REMOVES THE EVENT SESSION FROM THE SERVER DROP EVENT SESSION test_session ON SERVER GO -- REMOVES THE EVENT SESSION FROM THE SERVER select CAST(event_data as XML) as event_data from sys.fn_xe_file_target_read_file ('c:\temp\data2*.xel','c:\temp\data2*.xem', null, null)   This last statement will output one event with the following data: <event name="error_reported" package="sqlserver" id="100" version="1" timestamp="2010-03-05T23:15:05.481Z">   <data name="error">     <value>50000</value>     <text />   </data>   <data name="severity">     <value>2</value>     <text />   </data>   <data name="state">     <value>1</value>     <text />   </data>   <data name="user_defined">     <value>true</value>     <text />   </data>   <data name="message">     <value>PUBLISH</value>     <text />   </data>   <action name="sql_text" package="sqlserver">     <value>-- THIS ERROR WILL BE PUBLISHED RAISERROR (N'PUBLISH', 2, 1, 7, 3, N'abcde'); </value>     <text />   </action> </event> If you see more events, check if you have deleted previous event files. If so, please run   -- Deletes previous event files EXEC SP_CONFIGURE GO EXEC SP_CONFIGURE 'xp_cmdshell', 1 GO RECONFIGURE GO XP_CMDSHELL 'del c:\temp\data*.xe*' GO   or delete them manually.   More Info on Events: Extended Event Events More Info on Targets: Extended Event Targets More Info on Sessions: Extended Event Sessions More Info on Actions: Extended Event Actions More Info on Predicates: Extended Event Predicates Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Why unhandled exceptions are useful

    - by Simon Cooper
    It’s the bane of most programmers’ lives – an unhandled exception causes your application or webapp to crash, an ugly dialog gets displayed to the user, and they come complaining to you. Then, somehow, you need to figure out what went wrong. Hopefully, you’ve got a log file, or some other way of reporting unhandled exceptions (obligatory employer plug: SmartAssembly reports an application’s unhandled exceptions straight to you, along with the entire state of the stack and variables at that point). If not, you have to try and replicate it yourself, or do some psychic debugging to try and figure out what’s wrong. However, it’s good that the program crashed. Or, more precisely, it is correct behaviour. An unhandled exception in your application means that, somewhere in your code, there is an assumption that you made that is actually invalid. Coding assumptions Let me explain a bit more. Every method, every line of code you write, depends on implicit assumptions that you have made. Take this following simple method, that copies a collection to an array and includes an item if it isn’t in the collection already, using a supplied IEqualityComparer: public static T[] ToArrayWithItem( ICollection<T> coll, T obj, IEqualityComparer<T> comparer) { // check if the object is in collection already // using the supplied comparer foreach (var item in coll) { if (comparer.Equals(item, obj)) { // it's in the collection already // simply copy the collection to an array // and return it T[] array = new T[coll.Count]; coll.CopyTo(array, 0); return array; } } // not in the collection // copy coll to an array, and add obj to it // then return it T[] array = new T[coll.Count+1]; coll.CopyTo(array, 0); array[array.Length-1] = obj; return array; } What’s all the assumptions made by this fairly simple bit of code? coll is never null comparer is never null coll.CopyTo(array, 0) will copy all the items in the collection into the array, in the order defined for the collection, starting at the first item in the array. The enumerator for coll returns all the items in the collection, in the order defined for the collection comparer.Equals returns true if the items are equal (for whatever definition of ‘equal’ the comparer uses), false otherwise comparer.Equals, coll.CopyTo, and the coll enumerator will never throw an exception or hang for any possible input and any possible values of T coll will have less than 4 billion items in it (this is a built-in limit of the CLR) array won’t be more than 2GB, both on 32 and 64-bit systems, for any possible values of T (again, a limit of the CLR) There are no threads that will modify coll while this method is running and, more esoterically: The C# compiler will compile this code to IL according to the C# specification The CLR and JIT compiler will produce machine code to execute the IL on the user’s computer The computer will execute the machine code correctly That’s a lot of assumptions. Now, it could be that all these assumptions are valid for the situations this method is called. But if this does crash out with an exception, or crash later on, then that shows one of the assumptions has been invalidated somehow. An unhandled exception shows that your code is running in a situation which you did not anticipate, and there is something about how your code runs that you do not understand. Debugging the problem is the process of learning more about the new situation and how your code interacts with it. When you understand the problem, the solution is (usually) obvious. The solution may be a one-line fix, the rewrite of a method or class, or a large-scale refactoring of the codebase, but whatever it is, the fix for the crash will incorporate the new information you’ve gained about your own code, along with the modified assumptions. When code is running with an assumption or invariant it depended on broken, then the result is ‘undefined behaviour’. Anything can happen, up to and including formatting the entire disk or making the user’s computer sentient and start doing a good impression of Skynet. You might think that those can’t happen, but at Halting problem levels of generality, as soon as an assumption the code depended on is broken, the program can do anything. That is why it’s important to fail-fast and stop the program as soon as an invariant is broken, to minimise the damage that is done. What does this mean in practice? To start with, document and check your assumptions. As with most things, there is a level of judgement required. How you check and document your assumptions depends on how the code is used (that’s some more assumptions you’ve made), how likely it is a method will be passed invalid arguments or called in an invalid state, how likely it is the assumptions will be broken, how expensive it is to check the assumptions, and how bad things are likely to get if the assumptions are broken. Now, some assumptions you can assume unless proven otherwise. You can safely assume the C# compiler, CLR, and computer all run the method correctly, unless you have evidence of a compiler, CLR or processor bug. You can also assume that interface implementations work the way you expect them to; implementing an interface is more than simply declaring methods with certain signatures in your type. The behaviour of those methods, and how they work, is part of the interface contract as well. For example, for members of a public API, it is very important to document your assumptions and check your state before running the bulk of the method, throwing ArgumentException, ArgumentNullException, InvalidOperationException, or another exception type as appropriate if the input or state is wrong. For internal and private methods, it is less important. If a private method expects collection items in a certain order, then you don’t necessarily need to explicitly check it in code, but you can add comments or documentation specifying what state you expect the collection to be in at a certain point. That way, anyone debugging your code can immediately see what’s wrong if this does ever become an issue. You can also use DEBUG preprocessor blocks and Debug.Assert to document and check your assumptions without incurring a performance hit in release builds. On my coding soapbox… A few pet peeves of mine around assumptions. Firstly, catch-all try blocks: try { ... } catch { } A catch-all hides exceptions generated by broken assumptions, and lets the program carry on in an unknown state. Later, an exception is likely to be generated due to further broken assumptions due to the unknown state, causing difficulties when debugging as the catch-all has hidden the original problem. It’s much better to let the program crash straight away, so you know where the problem is. You should only use a catch-all if you are sure that any exception generated in the try block is safe to ignore. That’s a pretty big ask! Secondly, using as when you should be casting. Doing this: (obj as IFoo).Method(); or this: IFoo foo = obj as IFoo; ... foo.Method(); when you should be doing this: ((IFoo)obj).Method(); or this: IFoo foo = (IFoo)obj; ... foo.Method(); There’s an assumption here that obj will always implement IFoo. If it doesn’t, then by using as instead of a cast you’ve turned an obvious InvalidCastException at the point of the cast that will probably tell you what type obj actually is, into a non-obvious NullReferenceException at some later point that gives you no information at all. If you believe obj is always an IFoo, then say so in code! Let it fail-fast if not, then it’s far easier to figure out what’s wrong. Thirdly, document your assumptions. If an algorithm depends on a non-trivial relationship between several objects or variables, then say so. A single-line comment will do. Don’t leave it up to whoever’s debugging your code after you to figure it out. Conclusion It’s better to crash out and fail-fast when an assumption is broken. If it doesn’t, then there’s likely to be further crashes along the way that hide the original problem. Or, even worse, your program will be running in an undefined state, where anything can happen. Unhandled exceptions aren’t good per-se, but they give you some very useful information about your code that you didn’t know before. And that can only be a good thing.

    Read the article

  • How Visual Studio 2010 and Team Foundation Server enable Compliance

    - by Martin Hinshelwood
    One of the things that makes Team Foundation Server (TFS) the most powerful Application Lifecycle Management (ALM) platform is the traceability it provides to those that use it. This traceability is crucial to enable many companies to adhere to many of the Compliance regulations to which they are bound (e.g. CFR 21 Part 11 or Sarbanes–Oxley.)   From something as simple as relating Tasks to Check-in’s or being able to see the top 10 files in your codebase that are causing the most Bugs, to identifying which Bugs and Requirements are in which Release. All that information is available and more in TFS. Although all of this tradability is available within TFS you do need to understand that it is not for free. Well… I say that, but if you are using TFS properly you will have this information with no additional work except for firing up the reporting. Using Visual Studio ALM and Team Foundation Server you can relate every line of code changes all the way up to requirements and back down through Test Cases to the Test Results. Figure: The only thing missing is Build In order to build the relationship model below we need to examine how each of the relationships get there. Each member of your team from programmer to tester and Business Analyst to Business have their roll to play to knit this together. Figure: The relationships required to make this work can get a little confusing If Build is added to this to relate Work Items to Builds and with knowledge of which builds are in which environments you can easily identify what is contained within a Release. Figure: How are things progressing Along with the ability to produce the progress and trend reports the tractability that is built into TFS can be used to fulfil most audit requirements out of the box, and augmented to fulfil the rest. In order to understand the relationships, lets look at each of the important Artifacts and how they are associated with each other… Requirements – The root of all knowledge Requirements are the thing that the business cares about delivering. These could be derived as User Stories or Business Requirements Documents (BRD’s) but they should be what the Business asks for. Requirements can be related to many of the Artifacts in TFS, so lets look at the model: Figure: If the centre of the world was a requirement We can track which releases Requirements were scheduled in, but this can change over time as more details come to light. Figure: Who edited the Requirement and when There is also the ability to query Work Items based on the History of changed that were made to it. This is particularly important with Requirements. It might not be enough to say what Requirements were completed in a given but also to know which Requirements were ever assigned to a particular release. Figure: Some magic required, but result still achieved As an augmentation to this it is also possible to run a query that shows results from the past, just as if we had a time machine. You can take any Query in the system and add a “Asof” clause at the end to query historical data in the operational store for TFS. select <fields> from WorkItems [where <condition>] [order by <fields>] [asof <date>] Figure: Work Item Query Language (WIQL) format In order to achieve this you do need to save the query as a *.wiql file to your local computer and edit it in notepad, but one imported into TFS you run it any time you want. Figure: Saving Queries locally can be useful All of these Audit features are available throughout the Work Item Tracking (WIT) system within TFS. Tasks – Where the real work gets done Tasks are the work horse of the development team, but they only as useful as Excel if you do not relate them properly to other Artifacts. Figure: The Task Work Item Type has its own relationships Requirements should be broken down into Tasks that the development team work from to build what is required by the business. This may be done by a small dedicated group or by everyone that will be working on the software team but however it happens all of the Tasks create should be a Child of a Requirement Work Item Type. Figure: Tasks are related to the Requirement Tasks should be used to track the day-to-day activities of the team working to complete the software and as such they should be kept simple and short lest developers think they are more trouble than they are worth. Figure: Task Work Item Type has a narrower purpose Although the Task Work Item Type describes the work that will be done the actual development work involves making changes to files that are under Source Control. These changes are bundled together in a single atomic unit called a Changeset which is committed to TFS in a single operation. During this operation developers can associate Work Item with the Changeset. Figure: Tasks are associated with Changesets   Changesets – Who wrote this crap Changesets themselves are just an inventory of the changes that were made to a number of files to complete a Task. Figure: Changesets are linked by Tasks and Builds   Figure: Changesets tell us what happened to the files in Version Control Although comments can be changed after the fact, the inventory and Work Item associations are permanent which allows us to Audit all the way down to the individual change level. Figure: On Check-in you can resolve a Task which automatically associates it Because of this we can view the history on any file within the system and see how many changes have been made and what Changesets they belong to. Figure: Changes are tracked at the File level What would be even more powerful would be if we could view these changes super imposed over the top of the lines of code. Some people call this a blame tool because it is commonly used to find out which of the developers introduced a bug, but it can also be used as another method of Auditing changes to the system. Figure: Annotate shows the lines the Annotate functionality allows us to visualise the relationship between the individual lines of code and the Changesets. In addition to this you can create a Label and apply it to a version of your version control. The problem with Label’s is that they can be changed after they have been created with no tractability. This makes them practically useless for any sort of compliance audit. So what do you use? Branches – And why we need them Branches are a really powerful tool for development and release management, but they are most important for audits. Figure: One way to Audit releases The R1.0 branch can be created from the Label that the Build creates on the R1 line when a Release build was created. It can be created as soon as the Build has been signed of for release. However it is still possible that someone changed the Label between this time and its creation. Another better method can be to explicitly link the Build output to the Build. Builds – Lets tie some more of this together Builds are the glue that helps us enable the next level of tractability by tying everything together. Figure: The dashed pieces are not out of the box but can be enabled When the Build is called and starts it looks at what it has been asked to build and determines what code it is going to get and build. Figure: The folder identifies what changes are included in the build The Build sets a Label on the Source with the same name as the Build, but the Build itself also includes the latest Changeset ID that it will be building. At the end of the Build the Build Agent identifies the new Changesets it is building by looking at the Check-ins that have occurred since the last Build. Figure: What changes have been made since the last successful Build It will then use that information to identify the Work Items that are associated with all of the Changesets Changesets are associated with Build and change the “Integrated In” field of those Work Items . Figure: Find all of the Work Items to associate with The “Integrated In” field of all of the Work Items identified by the Build Agent as being integrated into the completed Build are updated to reflect the Build number that successfully integrated that change. Figure: Now we know which Work Items were completed in a build Now that we can link a single line of code changed all the way back through the Task that initiated the action to the Requirement that started the whole thing and back down to the Build that contains the finished Requirement. But how do we know wither that Requirement has been fully tested or even meets the original Requirements? Test Cases – How we know we are done The only way we can know wither a Requirement has been completed to the required specification is to Test that Requirement. In TFS there is a Work Item type called a Test Case Test Cases enable two scenarios. The first scenario is the ability to track and validate Acceptance Criteria in the form of a Test Case. If you agree with the Business a set of goals that must be met for a Requirement to be accepted by them it makes it both difficult for them to reject a Requirement when it passes all of the tests, but also provides a level of tractability and validation for audit that a feature has been built and tested to order. Figure: You can have many Acceptance Criteria for a single Requirement It is crucial for this to work that someone from the Business has to sign-off on the Test Case moving from the  “Design” to “Ready” states. The Second is the ability to associate an MS Test test with the Test Case thereby tracking the automated test. This is useful in the circumstance when you want to Track a test and the test results of a Unit Test designed to test the existence of and then re-existence of a a Bug. Figure: Associating a Test Case with an automated Test Although it is possible it may not make sense to track the execution of every Unit Test in your system, there are many Integration and Regression tests that may be automated that it would make sense to track in this way. Bug – Lets not have regressions In order to know wither a Bug in the application has been fixed and to make sure that it does not reoccur it needs to be tracked. Figure: Bugs are the centre of their own world If the fix to a Bug is big enough to require that it is broken down into Tasks then it is probably a Requirement. You can associate a check-in with a Bug and have it tracked against a Build. You would also have one or more Test Cases to prove the fix for the Bug. Figure: Bugs have many associations This allows you to track Bugs / Defects in your system effectively and report on them. Change Request – I am not a feature In the CMMI Process template Change Requests can also be easily tracked through the system. In some cases it can be very important to track Change Requests separately as an Auditor may want to know what was changed and who authorised it. Again and similar to Bugs, if the Change Request is big enough that it would require to be broken down into Tasks it is in reality a new feature and should be tracked as a Requirement. Figure: Make sure your Change Requests only Affect Requirements and not rewrite them Conclusion Visual Studio 2010 and Team Foundation Server together provide an exceptional Application Lifecycle Management platform that can help your team comply with even the harshest of Compliance requirements while still enabling them to be Agile. Most Audits are heavy on required documentation but most of that information is captured for you as long a you do it right. You don’t even need every team member to understand it all as each of the Artifacts are relevant to a different type of team member. Business Analysts manage Requirements and Change Requests Programmers manage Tasks and check-in against Change Requests and Bugs Testers manage Bugs and Test Cases Build Masters manage Builds Although there is some crossover there are still rolls or “hats” that are worn. Do you thing this is all achievable? Have I missed anything that you think should be there?

    Read the article

  • The Return Of __FILE__ And __LINE__ In .NET 4.5

    - by Alois Kraus
    Good things are hard to kill. One of the most useful predefined compiler macros in C/C++ were __FILE__ and __LINE__ which do expand to the compilation units file name and line number where this value is encountered by the compiler. After 4.5 versions of .NET we are on par with C/C++ again. It is of course not a simple compiler expandable macro it is an attribute but it does serve exactly the same purpose. Now we do get CallerLineNumberAttribute  == __LINE__ CallerFilePathAttribute        == __FILE__ CallerMemberNameAttribute  == __FUNCTION__ (MSVC Extension)   The most important one is CallerMemberNameAttribute which is very useful to implement the INotifyPropertyChanged interface without the need to hard code the name of the property anymore. Now you can simply decorate your change method with the new CallerMemberName attribute and you get the property name as string directly inserted by the C# compiler at compile time.   public string UserName { get { return _userName; } set { _userName=value; RaisePropertyChanged(); // no more RaisePropertyChanged(“UserName”)! } } protected void RaisePropertyChanged([CallerMemberName] string member = "") { var copy = PropertyChanged; if(copy != null) { copy(new PropertyChangedEventArgs(this, member)); } } Nice and handy. This was obviously the prime reason to implement this feature in the C# 5.0 compiler. You can repurpose this feature for tracing to get your hands on the method name of your caller along other stuff very fast now. All infos are added during compile time which is much faster than other approaches like walking the stack. The example on MSDN shows the usage of this attribute with an example public static void TraceMessage(string message, [CallerMemberName] string memberName = "", [CallerFilePath] string sourceFilePath = "", [CallerLineNumber] int sourceLineNumber = 0) { Console.WriteLine("Hi {0} {1} {2}({3})", message, memberName, sourceFilePath, sourceLineNumber); }   When I do think of tracing I do usually want to have a API which allows me to Trace method enter and leave Trace messages with a severity like Info, Warning, Error When I do print a trace message it is very useful to print out method and type name as well. So your API must either be able to pass the method and type name as strings or extract it automatically via walking back one Stackframe and fetch the infos from there. The first glaring deficiency is that there is no CallerTypeAttribute yet because the C# compiler team was not satisfied with its performance.   A usable Trace Api might therefore look like   enum TraceTypes { None = 0, EnterLeave = 1 << 0, Info = 1 << 1, Warn = 1 << 2, Error = 1 << 3 } class Tracer : IDisposable { string Type; string Method; public Tracer(string type, string method) { Type = type; Method = method; if (IsEnabled(TraceTypes.EnterLeave,Type, Method)) { } } private bool IsEnabled(TraceTypes traceTypes, string Type, string Method) { // Do checking here if tracing is enabled return false; } public void Info(string fmt, params object[] args) { } public void Warn(string fmt, params object[] args) { } public void Error(string fmt, params object[] args) { } public static void Info(string type, string method, string fmt, params object[] args) { } public static void Warn(string type, string method, string fmt, params object[] args) { } public static void Error(string type, string method, string fmt, params object[] args) { } public void Dispose() { // trace method leave } } This minimal trace API is very fast but hard to maintain since you need to pass in the type and method name as hard coded strings which can change from time to time. But now we have at least CallerMemberName to rid of the explicit method parameter right? Not really. Since any acceptable usable trace Api should have a method signature like Tracexxx(… string fmt, params [] object args) we not able to add additional optional parameters after the args array. If we would put it before the format string we would need to make it optional as well which would mean the compiler would need to figure out what our trace message and arguments are (not likely) or we would need to specify everything explicitly just like before . There are ways around this by providing a myriad of overloads which in the end are routed to the very same method but that is ugly. I am not sure if nobody inside MS agrees that the above API is reasonable to have or (more likely) that the whole talk about you can use this feature for diagnostic purposes was not a core feature at all but a simple byproduct of making the life of INotifyPropertyChanged implementers easier. A way around this would be to allow for variable argument arrays after the params keyword another set of optional arguments which are always filled by the compiler but I do not know if this is an easy one. The thing I am missing much more is the not provided CallerType attribute. But not in the way you would think of. In the API above I did add some filtering based on method and type to stay as fast as possible for types where tracing is not enabled at all. It should be no more expensive than an additional method call and a bool variable check if tracing for this type is enabled at all. The data is tightly bound to the calling type and method and should therefore become part of the static type instance. Since extending the CLR type system for tracing is not something I do expect to happen I have come up with an alternative approach which allows me basically to attach run time data to any existing type object in super fast way. The key to success is the usage of generics.   class Tracer<T> : IDisposable { string Method; public Tracer(string method) { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public void Dispose() { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public static void Info(string fmt, params object[] args) { } /// <summary> /// Every type gets its own instance with a fresh set of variables to describe the /// current filter status. /// </summary> /// <typeparam name="T"></typeparam> internal class TraceData<UsingType> { internal static TraceData<UsingType> Instance = new TraceData<UsingType>(); public bool IsInitialized = false; // flag if we need to reinit the trace data in case of reconfigured trace settings at runtime public TraceTypes Enabled = TraceTypes.None; // Enabled trace levels for this type } } We do not need to pass the type as string or Type object to the trace Api. Instead we define a generic Api that accepts the using type as generic parameter. Then we can create a TraceData static instance which is due to the nature of generics a fresh instance for every new type parameter. My tests on my home machine have shown that this approach is as fast as a simple bool flag check. If you have an application with many types using tracing you do not want to bring the app down by simply enabling tracing for one special rarely used type. The trace filter performance for the types which are not enabled must be therefore the fasted code path. This approach has the nice side effect that if you store the TraceData instances in one global list you can reconfigure tracing at runtime safely by simply setting the IsInitialized flag to false. A similar effect can be achieved with a global static Dictionary<Type,TraceData> object but big hash tables have random memory access semantics which is bad for cache locality and you always need to pay for the lookup which involves hash code generation, equality check and an indexed array access. The generic version is wicked fast and allows you to add more features to your tracing Api with minimal perf overhead. But it is cumbersome to write the generic type argument always explicitly and worse if you do refactor code and move parts of it to other classes it might be that you cannot configure tracing correctly. I would like therefore to decorate my type with an attribute [CallerType] class Tracer<T> : IDisposable to tell the compiler to fill in the generic type argument automatically. class Program { static void Main(string[] args) { using (var t = new Tracer()) // equivalent to new Tracer<Program>() { That would be really useful and super fast since you do not need to pass any type object around but you do have full type infos at hand. This change would be breaking if another non generic type exists in the same namespace where now the generic counterpart would be preferred. But this is an acceptable risk in my opinion since you can today already get conflicts if two generic types of the same name are defined in different namespaces. This would be only a variation of this issue. When you do think about this further you can add more features like to trace the exception in your Dispose method if the method is left with an exception with that little trick I did write some time ago. You can think of tracing as a super fast and configurable switch to write data to an output destination or to execute alternative actions. With such an infrastructure you can e.g. Reconfigure tracing at run time. Take a memory dump when a specific method is left with a specific exception. Throw an exception when a specific trace statement is hit (useful for testing error conditions). Execute a passed delegate which e.g. dumps additional state when enabled. Write data to an in memory ring buffer and dump it when specific events do occur (e.g. method is left with an exception, triggered from outside). Write data to an output device. …. This stuff is really useful to have when your code is in production on a mission critical server and you need to find the root cause of sporadic crashes of your application. It could be a buggy graphics card driver which throws access violations into your application (ok with .NET 4 not anymore except if you enable a compatibility flag) where you would like to have a minidump or you have reached after two weeks of operation a state where you need a full memory dump at a specific point in time in the middle of an transaction. At my older machine I do get with this super fast approach 50 million traces/s when tracing is disabled. When I do know that tracing is enabled for this type I can walk the stack by using StackFrameHelper.GetStackFramesInternal to check further if a specific action or output device is configured for this method which is about 2-3 times faster than the regular StackTrace class. Even with one String.Format I am down to 3 million traces/s so performance is not so important anymore since I do want to do something now. The CallerMemberName feature of the C# 5 compiler is nice but I would have preferred to get direct access to the MethodHandle and not to the stringified version of it. But I really would like to see a CallerType attribute implemented to fill in the generic type argument of the call site to augment the static CLR type data with run time data.

    Read the article

  • Our winners- and some BBQ for everyone

    - by Steve Tunstall
    Congrats to our two winners for the first two comments on my last entry. Steve from Australia and John Lemon. Steve won since he was the first person over the International Date Line to see the post I made so late after a workday on Friday. So not only does he get to live in a country with the 2nd most beautiful women in the world, but now he gets some cool Oracle Swag, too. (Yes, I live on the beach in southern California, so you can guess where 1st place is for that other contest…Now if Steve happens to live in Manly, we may actually have a tie going…) OK, ok, for everyone else, you can be winners, too. How you ask? I will make you the envy of every guy and gal in your neighborhood or campsite. What follows is the way to smoke the best ribs you or anyone you know have ever tasted. Follow my instructions and give it a try. People at your party/cookout/campsite will tell you that they’re the best ribs they’ve ever had, and I will let you take all the credit. Yes, I fully realize this post is going to be longer than any post I’ve done yet. But let’s get serious here. Smoking meat is much more important, agreed? J In all honesty, this is a repeat of another blog I did, so I’m just copying and pasting. Step 1. Get some ribs. I actually really like Costco’s pack. They have both St. Louis and Baby Back. (They are the same ribs, but cut in half down the sides. St. Louis style is the ‘front’ of the ribs closest to the stomach, and ‘Baby back’ is the part of the ribs where is connects to the backbone). I like them both, so here you see I got one pack of each. About 4 racks to a pack. So these two packs for $25 each will feed about 16-20 of my guests. So around 3 bucks a person is a pretty good deal for the best ribs you’ll ever have. Step 2. Prep the ribs the night before you’re going to smoke. You need to trim them to fit your smoker racks, and also take off the membrane and add your rub. Then cover and set in fridge overnight. Here’s how to take off the membrane, which will not break down with heat and smoke like the rest of the meat, so must be removed. Use a butter knife to work in a ways between the membrane and the white bone. Just enough to make room for your finger. Try really hard not to poke through the membrane, you want to keep it whole. See how my gloved fingers can now start to lift up and pull off the membrane? This is what you are trying to do. It’s awesome when the whole thing can come off at once. This one is going great, maybe the best one I’ve ever done. Sometime, it falls apart and doesn't come off in one nice piece. I hate when that happens. Now, add your rub and pat it down once into the meat with your other hand. My rub is not secret. I got it from my mentor, a BBQ competitive chef who is currently ranked #1 in California and #3 in the nation on the BBQ circuit. He does full-day classes in southern California if anyone is interested in taking his class. Go to www.slapyodaddybbq.com to check him out. I tweaked his run recipe a tad and made my own. It’s one part Lawry’s, one part sugar, one part Montreal Steak Seasoning, one part garlic powder, one-half part red chili powder, one-half part paprika, and then 1/20th part cayenne. You can adjust that last ingredient, or leave it out. Real cheap stuff you can get at Costco. This lets you make enough rub to last about a year or two. Don’t make it all at once, make a shaker’s worth and use it up before you make more. Place it all in a bowl, mix well, and then add to a shaker like you see here. You can get a shaker with medium sized holes on it at any restaurant supply store or Smart & Final. The kind you see at pizza places for their red pepper flakes works best. Now cover and place in fridge overnight. Step 3. The next day. Ok, I’m ready to go. Get your stuff together. You will need your smoker, some good foil, a can of peach nectar, a bottle of Agave syrup, and a package of brown sugar. You will need this stuff later. I also use a clean spray bottle, and apple juice. Step 4. Make your fire, or turn on your electric smoker. In this example I’m using my portable charcoal smoker. I got this for only $40. I then modified it to be useful. Once modified, these guys actually work very well. Trust me, your food DOES NOT KNOW how expensive your smoker is. Someone who tells you that you need to spend a bunch of money on a smoker is an idiot. I also have an electric smoker that stays in my backyard. It’s cleaner and larger so I can smoke more food. But this little $40 one works great for going camping. Here is what my fire-bowl looks like. I leave a space in the middle open, and place cold charcoal and wood chucks in a circle going outwards. This makes it so when I dump the hot coals down the middle, they will slowly burn outwards, hitting different wood chucks at different times, allowing me to go 4-5 hours without having to even touch my fire. For ribs, I use apple and pecan wood. Pecan works for anything. Apple or any fruit wood is excellent for pork. So now I make my hot charcoal with a chimney only about half-full. I found a great use for that side-burner on my grill that I never use. It makes a fantastic chimney starter. You never use fluids of any kind, nor ever use that stupid charcoal that has lighter fluid built into it. Never, ever, ever. Step 5. Smoke. Add your ribs in the racks and stack them up in your smoker. I have a digital thermometer on a probe that I use to keep track of the temp in the smoker. I just lay the probe on the top rack and shut the lid. This cheap guy is a little harder to maintain the right temperature of around 225 F, so I do have to keep my eye on it more than my electric one or a more expensive charcoal one with the cool gadgets that regulate your temp for you. Every hour, spray apple juice all over your ribs using that spray bottle. After about 3 hours, you should have a very good crust (called the Bark) on your ribs. Once you have the Bark where you want it, carefully remove your ribs and place them in a tray. We are now ready for a very important part to make the flavor. Get a large piece of foil and place one rib section on it. Splash some of the peach nectar on it, and then a drizzle of the Agave syrup. Then, use your gloved hand to pack on some brown sugar. Do this on BOTH sides, and then completely wrap it up TIGHT in the foil. Do this for each rib section, and then place all the wrapped sections back into the smoker for another 4 to 6 hours. This is where the meat will get tender and flavorful. The first three hours is only to make the smoke bark. You don’t need smoke anymore, since the ribs are wrapped, you only need to keep the heat around 225 for the next 4-6 hours. Obviously you don’t spray anymore. Just time and slow heat. Be patient. It’s actually really hard to overdo it. You can let them go longer, and all that will happen is they will get even MORE tender!!! If you take them out too soon, they will be tough. How do you know? Take out one package (use long tongs) and open it up. If you grab a bone with your tongs and it just falls apart and breaks away from the rest of the meat, you are done!!! Enjoy!!! Step 6. Eat. It pulls apart like this when it’s done. By the way, smoking tri-tip is way easier. Just rub it with the same rub, and put in your smoker for about 2.5 hours at 250 F. That’s it. Low-maintenance. It comes out like this, with a fantastic smoke ring and amazing flavor. Thanks, and I will put up another good tip, about the ZFSSA, around the end of November. Steve 

    Read the article

  • CodePlex Daily Summary for Wednesday, May 30, 2012

    CodePlex Daily Summary for Wednesday, May 30, 2012Popular ReleasesOMS.Ice - T4 Text Template Generator: OMS.Ice - T4 Text Template Generator v1.4.0.14110: Issue 601 - Template file name cannot contain characters that are not allowed in C#/VB identifiers Issue 625 - Last line will be ignored by the parser Issue 626 - Usage of environment variables and macrosSilverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.totalem: version 2012.05.30.1: Beta version added function for mass renaming files and foldersAudio Pitch & Shift: Audio Pitch and Shift 4.4.0: Tracklist added on main window Improved performances with tracklist Some other fixesJson.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...DBScripterCmd - A command line tool to script database objects to seperate files: DBScripterCmd Source v1.0.2.zip: Add support for SQL Server 2005Indent Guides for Visual Studio: Indent Guides v12.1: Version History Changed in v12.1: Fixed crash when unable to start asynchronous analysis Fixed upgrade from v11 Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new setting...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...StarTrinity Face Recognition Library: Version 1.2: Much better accuracy????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ????SDK for .Net 4.X???????PHP?SDK???OAuth??API???Client???。 ??????API?? ???????OAuth2.0???? ???:????????,DEMO??AppKey????????????????,?????AppKey,????AppKey???????????,?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitCommonLibrary.NET: CommonLibrary.NET 0.9.8 - Final Release: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. FluentscriptCommonLibrary.NET 0.9.8 contains a scripting language called FluentScript. Application: FluentScript Version: 0.9.8 Build: 0.9.8.4 Changeset: 75050 ( CommonLibrary.NET ) Release date: May 24, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...New Projects5Widgets: 5Widgets is a framework for building HTML5 canvas interfaces. Written in JavaScript, 5Widgets consists of a library of widgets and a controller that implements the MVC pattern. Though the HTML5 standard is gaining popularity, there is no framework like this at the moment. Yet, as a professional developer, I know many, including myself, would really find such a library useful. I have uploaded my initial code, which can definitely be improved since I have not had the time to work on it fu...Azure Trace Listener: Simple Trace Listener outputting trace data directly to Windows Azure Queue or Table Storage. Unlike the Windows Azure Diagnostics Listener (WAD), logging happens immediately and does not rely on (scheduled or manually triggered) Log Transfer mechanism. A simple Reader application shows how to read trace entries and can be used as is or as base for more advanced scenarios.CodeSample2012: Code Sample is a windows tool for saving pieces of codeEncryption: The goal of the Encryption project is to provide solid, high quality functionality that aims at taking the complexity out of using the System.Security.Cryptography namespace. The first pass of this library provides a very strong password encryption system. It uses variable length random salt bytes with secure SHA512 cryptographic hashing functions to allow you to provide a high level of security to the users. Entity Framework Code-First Automatic Database Migration: The Entity Framework Code-First Automatic Database Migration tool was designed to help developers easily update their database schema while preserving their data when they change their POCO objects. This is not meant to take the place of Code-First Migrations. This project is simply designed to ease the development burden of database changes. It grew out of the desire to not have to delete, recreated, and seed the database every time I made an object model change. Function Point Plugin: Function Point Tracability Mapper VSIX for Visual Studio 2010/TFS 2010+FunkOS: dcpu16 operating systemGit for WebMatrix: This is a WebMatrix Extension that allows users to access Git Source Control functions.Groupon Houses: the groupon site for housesLiquifier - Complete serialisation/deserialisation for complex object graphs: Liquifier is a serialisation/deserialisation library for preserving object graphs with references intact. Liquifier uses attributes and interfaces to allow the user to control how a type is serialised - the aim is to free the user from having to write code to serialise and deserialise objects, especially large or complex graphs in which this is a significant undertaking.MTACompCommEx032012: lak lak lakMVC Essentials: MVC Essentials is aimed to have all my learning in the projects that I have worked.MyWireProject: This project manages wireless networks.Peulot Heshbon - Hebrew: This program is for teaching young students math, until 6th grade. The program gives questions for the user. The user needs to answer the question. After 10 questions the user gets his mark. The marks are saved and can be viewed from every run. PlusOne: A .NET Extension and Utility Library: PlusOne is a library of extension and utility methods for C#.Project Support: This project is a simple project management solution. This will allow you to manage your clients, track bug reports, request additional features to projects that you are currently working on and much more. A client will be allowed to have multiple users, so that you can track who has made reports etc and provide them feedback. The solution is set-up so that if you require you can modify the styling to fit your companies needs with ease, you can even have multiple styles that can be set ...SharePoint 2010 Slide Menu Control: Navigation control for building SharePoint slide menuSIGO: 1 person following this project (follow) Projeto SiGO O Projeto SiGO (Sistema de Gerenciamento Odontologico) tem um Escorpo Complexo com varios programas e rotinas, compondo o modulo de SAC e CRM, Finanças, Estoque e outro itens. Coordenador Heitor F Neto : O Projeto SiGo desenvolvido aqui no CodePlex e open source, sera apenas um Prototipo, assim que desenvolmemos os modulos basicos iremos migrar para um servidor Pago e com segurança dos Codigo Fonte e Banco de Dados. Pessoa...STEM123: Windows Phone 7 application to help people find and create STEM Topic details.TIL: Text Injection and Templating Library: An advanced alternative to string.Format() that encapsulates templates in objects, uses named tokens, and lets you define extra serializing/processing steps before injecting input into the template (think, join an array, serialize an object, etc).UAH Exchange: Ukrainian hrivna currency exchangeuberBook: uberBook ist eine Kontakt-Verwaltung für´s Tray. Das Programm syncronisiert sämtliche Kontakte mit dem Internet und sucht automatisch nach Social-Network Profilen Ihrer KontakteWPF Animated GIF: A simple library to display animated GIF images in WPF, usable in XAML or in code.

    Read the article

  • BizTalk: History of one project architecture

    - by Leonid Ganeline
    "In the beginning God made heaven and earth. Then he started to integrate." At the very start was the requirement: integrate two working systems. Small digging up: It was one system. It was good but IT guys want to change it to the new one, much better, chipper, more flexible, and more progressive in technologies, more suitable for the future, for the faster world and hungry competitors. One thing. One small, little thing. We cannot turn off the old system (call it A, because it was the first), turn on the new one (call it B, because it is second but not the last one). The A has a hundreds users all across a country, they must study B. A still has a lot nice custom features, home-made features that cannot disappear. These features have to be moved to the B and it is a long process, months and months of redevelopment. So, the decision was simple. Let’s move not jump, let’s both systems working side-by-side several months. In this time we could teach the users and move all custom A’s special functionality to B. That automatically means both systems should work side-by-side all these months and use the same data. Data in A and B must be in sync. That’s how the integration projects get birth. Moreover, the specific of the user tasks requires the both systems must be in sync in real-time. Nightly synchronization is not working, absolutely.   First draft The first draft seems simple. Both systems keep data in SQL databases. When data changes, the Create, Update, Delete operations performed on the data, and the sync process could be started. The obvious decision is to use triggers on tables. When we are talking about data, we are talking about several entities. For example, Orders and Items [in Orders]. We decided to use the BizTalk Server to synchronize systems. Why it was chosen is another story. Second draft   Let’s take an example how it works in more details. 1.       User creates a new entity in the A system. This fires an insert trigger on the entity table. Trigger has to pass the message “Entity created”. This message includes all attributes of the new entity, but I focused on the Id of this entity in the A system. Notation for this message is id.A. System A sends id.A to the BizTalk Server. 2.       BizTalk transforms id.A to the format of the system B. This is easiest part and I will not focus on this kind of transformations in the following text. The message on the picture is still id.A but it is in slightly different format, that’s why it is changing in color. BizTalk sends id.A to the system B. 3.       The system B creates the entity on its side. But it uses different id-s for entities, these id-s are id.B. System B saves id.A+id.B. System B sends the message id.A+id.B back to the BizTalk. 4.       BizTalk sends the message id.A+id.B to the system A. 5.       System A saves id.A+id.B. Why both id-s should be saved on both systems? It was one of the next requirements. Users of both systems have to know the systems are in sync or not in sync. Users working with the entity on the system A can see the id.B and use it to switch to the system B and work there with the copy of the same entity. The decision was to store the pairs of entity id-s on both sides. If there is only one id, the entities are not in sync yet (for the Create operation). Third draft Next problem was the reliability of the synchronization. The synchronizing process can be interrupted on each step, when message goes through the wires. It can be communication problem, timeout, temporary shutdown one of the systems, the second system cannot be synchronized by some internal reason. There were several potential problems that prevented from enclosing the whole synchronization process in one transaction. Decision was to restart the whole sync process if it was not finished (in case of the error). For this purpose was created an additional service. Let’s call it the Resync service. We still keep the id pairs in both systems, but only for the fast access not for the synchronization process. For the synchronizing these id-s now are kept in one main place, in the Resync service database. The Resync service keeps record as: ·       Id.A ·       Id.B ·       Entity.Type ·       Operation (Create, Update, Delete) ·       IsSyncStarted (true/false) ·       IsSyncFinished (true/false0 The example now looks like: 1.       System A creates id.A. id.A is saved on the A. Id.A is sent to the BizTalk. 2.       BizTalk sends id.A to the Resync and to the B. id.A is saved on the Resync. 3.       System B creates id.B. id.A+id.B are saved on the B. id.A+id.B are sent to the BizTalk. 4.       BizTalk sends id.A+id.B to the Resync and to the A. id.A+id.B are saved on the Resync. 5.       id.A+id.B are saved on the B. Resync changes the IsSyncStarted and IsSyncFinished flags accordingly. The Resync service implements three main methods: ·       Save (id.A, Entity.Type, Operation) ·       Save (id.A, id.B, Entity.Type, Operation) ·       Resync () Two Save() are used to save id-s to the service storage. See in the above example, in 2 and 4 steps. What about the Resync()? It is the method that finishes the interrupted synchronization processes. If Save() is started by the trigger event, the Resync() is working as an independent process. It periodically scans the Resync storage to find out “unfinished” records. Then it restarts the synchronization processes. It tries to synchronize them several times then gives up.     One more thing, both systems A and B must tolerate duplicates of one synchronizing process. Say on the step 3 the system B was not able to send id.A+id.B back. The Resync service must restart the synchronization process that will send the id.A to B second time. In this case system B must just send back again also created id.A+id.B pair without errors. That means “tolerate duplicates”. Fourth draft Next draft was created only because of the aesthetics. As it always happens, aesthetics gave significant performance gain to the whole system. First was the stupid question. Why do we need this additional service with special database? Can we just master the BizTalk to do something like this Resync() does? So the Resync orchestration is doing the same thing as the Resync service. It is started by the Id.A and finished by the id.A+id.B message. The first works as a Start message, the second works as a Finish message.     Here is a diagram the whole process without errors. It is pretty straightforward. The Resync orchestration is waiting for the Finish message specific period of time then resubmits the Id.A message. It resubmits the Id.A message specific number of times then gives up and gets suspended. It can be resubmitted then it starts the whole process again: waiting [, resubmitting [, get suspended]], finishing. Tuning up The Resync orchestration resubmits the id.A message with special “Resubmitted” flag. The subscription filter on the Resync orchestration includes predicate as (Resubmit_Flag != “Resubmitted”). That means only the first Sync orchestration starts the Resync orchestration. Other Sync orchestration instantiated by the resubmitting can finish this Resync orchestration but cannot start another instance of the Resync   Here is a diagram where system B was inaccessible for some period of time. The Resync orchestration resubmitted the id.A two times. Then system B got the response the id.A+id.B and this finished the Resync service execution. What is interesting about this, there were submitted several identical id.A messages and only one id.A+id.B message. Because of this, the system B and the Resync must tolerate the duplicate messages. We also told about this requirement for the system B. Now the same requirement is for the Resunc. Let’s assume the system B was very slow in the first response and the Resync service had time to resubmit two id.A messages. System B responded not, as it was in previous case, with one id.A+id.B but with two id.A+id.B messages. First of them finished the Resync execution for the id.A. What about the second id.A+id.B? Where it goes? So, we have to add one more internal requirement. The whole solution must tolerate many identical id.A+id.B messages. It is easy task with the BizTalk. I added the “SinkExtraMessages” subscriber (orchestration with one receive shape), that just get these messages and do nothing. Real design Real architecture is much more complex and interesting. In reality each system can submit several id.A almost simultaneously and completely unordered. There are not only the “Create entity” operation but the Update and Delete operations. And these operations relate each other. Say the Update operation after Delete means not the same as Update after Create. In reality there are entities related each other. Say the Order and Order Items. Change on one of it could start the series of the operations on another. Moreover, the system internals are the “black boxes” and we cannot predict the exact content and order of the operation series. It worth to say, I had to spend a time to manage the zombie message problems. The zombies are still here, but this is not a problem now. And this is another story. What is interesting in the last design? One orchestration works to help another to be more reliable. Why two orchestration design is more reliable, isn’t it something strange? The Synch orchestration takes all the message exchange between systems, here is the area where most of the errors could happen. The Resync orchestration sends and receives messages only within the BizTalk server. Is there another design? Sure. All Resync functionality could be implemented inside the Sync orchestration. Hey guys, some other ideas?

    Read the article

  • Managed Service Architectures Part I

    - by barryoreilly
    Instead of thinking about service oriented architecture, a concept that is continually defined, redefined, abused and mistreated, perhaps it is time to drop the acronym and consider what we actually need to get the job done.   ‘Pure’ SOA involves the modeling of an organisation’s processes, the so called ‘Top Down’ approach, followed by the implementation of these processes as services.     Another approach, more commonly seen in the wild, is the bottom up approach. This usually involves services that simply start popping up in the organization, and SOA in this case is often just an attempt to rein in these services. Such projects, although described as SOA projects for a variety of reasons, have clearly little relation to process driven architecture. Much has been written about these two approaches, with many deciding that a hybrid of both methods is needed to succeed with SOA.   These hybrid methods are a sensible compromise, but one gets the feeling that there is too much focus on ‘Succeeding with SOA’. Organisations who focus too much on bottom up development, or who waste too much time and money on top down approaches that don’t produce results, are often recommended to attempt an ‘agile’(Erl) or ‘middle-out’ (Microsoft) approach in order to succeed with SOA.  The problem with recommending this approach is that, in most cases, succeeding with SOA isn’t the aim of the project. If a project is started with the simple aim of ‘Succeeding with SOA’ then the reasons for the projects existence probably need to be questioned.   There are a number of things we can be sure of: ·         An organisation will have a number of disparate IT systems ·         Some of these systems will have redundant data and functionality ·         Integration will give considerable ROI ·         Integration will already be under way. ·         Services will already exist in the organisation ·         These services will be inconsistent in their implementation and in their governance   So there are three goals here: 1.       Alignment between the business and IT 2.     Integration of disparate systems 3.     Management of services.   2 and 3 are going to happen,  in fact they must happen if any degree of return is expected from the IT department. Ignoring 1 is considered a typical mistake in SOA implementations, as it ignores the business implications. However, the business implication of this approach is the money saved in more efficient IT processes. 2 and 3 are ongoing, and they will continue happening, even if a large project to produce a SOA metamodel is started. The result will then be an unstructured cackle of services, and a metamodel that is already going out of date. So we get stuck in and rebuild our services so that they match the metamodel, with the far reaching consequences that this will have on all our LOB systems are current. Lets imagine that this actually works ( how often do we rip and replace working software because it doesn't fit a certain pattern? Never -that's the point of integration), we will now be working with a metamodel that is out of date, and most likely incomplete if the organisation is large.      Accepting that an object can have more than one model over time, with perhaps more than one model being  at any given time will help us realise the limitations of the top down model. It is entirely normal , and perhaps necessary, for an organisation to be able to view an entity from different perspectives.   So, instead of trying to constantly force these goals in a straight line, why not let them happen in parallel, and manage the changes in each layer.     If  company A has chosen to model their business processes and create a business architecture, there will be a reason behind this. Often the aim is to make the business more flexible and able to cope with change, through alignment between the business and the IT department.   If company B’s IT department recognizes the problem of wild services springing up everywhere, and decides to do something about it, by designing a platform and processes for the introduction of services, is this not a valid approach?   With the hybrid approach, it is recommended that company A begin deploying services as quickly as possible. Based on models that are clearly incomplete, and which will therefore change rapidly and often in the near future. Natural business evolution will also mean that the models can be guaranteed to change in the not so near future. To ‘Succeed with SOA’ Company B needs to go back to the drawing board and start modeling processes and objects. So, in effect, we are telling business analysts to start developing code based on a model they are unsure of, and telling programmers to ignore the obvious and growing problems in their IT department and start drawing lines and boxes.     Could the problem be that there are two different problem domains? And the whole concept of SOA as it being described by clever salespeople today creates an example of oft dreaded ‘tight coupling’ between these two domains?   Could it be that we have taken two large problem areas, and bundled the solution together in order to create a magic bullet? And then convinced ourselves that the bullet actually exists?   Company A wants to have a closer relationship between the business and its IT department, in order to become a more flexible organization. Company B wants to decrease the maintenance costs of its IT infrastructure. If both companies focus on succeeding with SOA, then they aren’t focusing on their actual goals.   If Company A starts building services from incomplete models, without a gameplan, they will end up in the same situation as company B, with wild services. If company B focuses on modeling, they could easily end up with the same problems as company A.   Now we have two companies, who a short while ago had one problem each, that now have two problems each. This has happened because of a focus on ‘Succeeding with SOA’, rather than solving the problem at hand.   This is not to suggest that the two problem domains are unrelated, a strategy that encompasses both will obviously be good for the organization. But only if the organization realizes this and can develop such a strategy. This strategy cannot be bought in a box.       Anyone who has worked with SOA for a while will be used to analyzing the solutions to a problem and judging the solution’s level of coupling. If we have two applications that each perform separate functions, but need to communicate with each other, we create a integration layer between them, perhaps with a service, but we do all we can to reduce the dependency between the two systems. Using the same approach, we can separate the modeling (business architecture) and the service hosting (technical architecture).     The business architecture describes the processes and business objects in the business domain.   The technical architecture describes the hosting and management and implementation of services.   The glue that binds these together, the integration layer in our analogy, is the service contract, where the operations map the processes to their technical implementation, and the messages map business concepts to software objects in the implementation.   If we reduce the coupling between these layers, we should be able to allow developers to develop services, and business analysts to develop models, without the changes rippling through from one side to the other.   This would allow company A to carry on modeling, and company B to develop a service platform, each achieving their intended goal, without necessarily creating the problems seen in pure top down or bottom up approaches. Company B could then at a later date map their service infrastructure to a unified model, and company A could carry on modeling, insulating deployed services from changes in the ongoing modeling.   How do we do this?  The concept of service virtualization has been around for a while, and is instantly realizable in Microsoft’s Managed Services Engine. Here we can create a layer of virtual services, which represent the business analyst’s view, presenting uniform contracts to the outside world. These services can then transform and route messages to the actual service implementations. I like to think of the virtual services with their beautifully modeled interfaces as ‘SOA services’, and the implementations as simple integration ‘adapter’ services providing an interface to a technical implementation. The Managed Services Engine also provides policy based control over services, regardless of where they are deployed, simplifying handling of security, logging, exception handling etc.   This solves a big problem. The pressure to deliver services quickly is always there in projects. It is very important to quickly show value when implementing service architectures. There is also pressure to deliver quality, and you can’t easily do both at the same time. This approach allows quick delivery with quality increasing over time, allowing modeling and service development to occur in parallel and independent of each other. The link between business modeling and service implementation is not one that is obvious to many organizations, and requires a certain maturity to realize and drive forward. It is also completely possible that a company can benefit from one without the other, even if this approach is frowned upon today, there are many companies doing so and seeing ROI.   Of course there are disadvantages to this. The biggest one being the transformations necessary between the virtual interfaces and the service implementations. Bad choices in developing the services in the service implementation could mean that it is impossible to map the modeled processes to the implementation with redevelopment of the service. In many cases the architect will not have a choice here anyway, as proprietary systems are often delivered with predeveloped services. The alternative is to wait until the model is finished and then build the service according the model. However, if that approach worked we wouldn’t be having this discussion! And even when it does work, natural business evolution will mean that the two concepts (model and implementation) will immediately start to drift away from each other, so coupling them tightly together so that they are forever bound to the model that only applies at the time of the modeling work will not really achieve a great deal. Architecture is all about trade offs, and here a choice has to be made. The choice is between something will initially be of low quality but will work, or something that may well be impossible to achieve in most situations.         In conclusion, top-down is a natural approach for business analysts, and bottom-up  is a natural approach for developers. Instead of trying to force something on both that neither want, and which has not shown itself to be successful,  why not let them get on with their jobs, and let an enterprise architect coordinate the processes?

    Read the article

  • Why Are Minimized Programs Often Slow to Open Again?

    - by Jason Fitzpatrick
    It seems particularly counterintuitive: you minimize an application because you plan on returning to it later and wish to skip shutting the application down and restarting it later, but sometimes maximizing it takes even longer than launching it fresh. What gives? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Bart wants to know why he’s not saving any time with application minimization: I’m working in Photoshop CS6 and multiple browsers a lot. I’m not using them all at once, so sometimes some applications are minimized to taskbar for hours or days. The problem is, when I try to maximize them from the taskbar – it sometimes takes longer than starting them! Especially Photoshop feels really weird for many seconds after finally showing up, it’s slow, unresponsive and even sometimes totally freezes for minute or two. It’s not a hardware problem as it’s been like that since always on all on my PCs. Would I also notice it after upgrading my HDD to SDD and adding RAM (my main PC holds 4 GB currently)? Could guys with powerful pcs / macs tell me – does it also happen to you? I guess OSes somehow “focus” on active software and move all the resources away from the ones that run, but are not used. Is it possible to somehow set RAM / CPU / HDD priorities or something, for let’s say, Photoshop, so it won’t slow down after long period of inactivity? So what is the deal? Why does he find himself waiting to maximize a minimized app? The Answer SuperUser contributor Allquixotic explains why: Summary The immediate problem is that the programs that you have minimized are being paged out to the “page file” on your hard disk. This symptom can be improved by installing a Solid State Disk (SSD), adding more RAM to your system, reducing the number of programs you have open, or upgrading to a newer system architecture (for instance, Ivy Bridge or Haswell). Out of these options, adding more RAM is generally the most effective solution. Explanation The default behavior of Windows is to give active applications priority over inactive applications for having a spot in RAM. When there’s significant memory pressure (meaning the system doesn’t have a lot of free RAM if it were to let every program have all the RAM it wants), it starts putting minimized programs into the page file, which means it writes out their contents from RAM to disk, and then makes that area of RAM free. That free RAM helps programs you’re actively using — say, your web browser — run faster, because if they need to claim a new segment of RAM (like when you open a new tab), they can do so. This “free” RAM is also used as page cache, which means that when active programs attempt to read data on your hard disk, that data might be cached in RAM, which prevents your hard disk from being accessed to get that data. By using the majority of your RAM for page cache, and swapping out unused programs to disk, Windows is trying to improve responsiveness of the program(s) you are actively using, by making RAM available to them, and caching the files they access in RAM instead of the hard disk. The downside of this behavior is that minimized programs can take a while to have their contents copied from the page file, on disk, back into RAM. The time increases the larger the program’s footprint in memory. This is why you experience that delay when maximizing Photoshop. RAM is many times faster than a hard disk (depending on the specific hardware, it can be up to several orders of magnitude). An SSD is considerably faster than a hard disk, but it is still slower than RAM by orders of magnitude. Having your page file on an SSD will help, but it will also wear out the SSD more quickly than usual if your page file is heavily utilized due to RAM pressure. Remedies Here is an explanation of the available remedies, and their general effectiveness: Installing more RAM: This is the recommended path. If your system does not support more RAM than you already have installed, you will need to upgrade more of your system: possibly your motherboard, CPU, chassis, power supply, etc. depending on how old it is. If it’s a laptop, chances are you’ll have to buy an entire new laptop that supports more installed RAM. When you install more RAM, you reduce memory pressure, which reduces use of the page file, which is a good thing all around. You also make available more RAM for page cache, which will make all programs that access the hard disk run faster. As of Q4 2013, my personal recommendation is that you have at least 8 GB of RAM for a desktop or laptop whose purpose is anything more complex than web browsing and email. That means photo editing, video editing/viewing, playing computer games, audio editing or recording, programming / development, etc. all should have at least 8 GB of RAM, if not more. Run fewer programs at a time: This will only work if the programs you are running do not use a lot of memory on their own. Unfortunately, Adobe Creative Suite products such as Photoshop CS6 are known for using an enormous amount of memory. This also limits your multitasking ability. It’s a temporary, free remedy, but it can be an inconvenience to close down your web browser or Word every time you start Photoshop, for instance. This also wouldn’t stop Photoshop from being swapped when minimizing it, so it really isn’t a very effective solution. It only helps in some specific situations. Install an SSD: If your page file is on an SSD, the SSD’s improved speed compared to a hard disk will result in generally improved performance when the page file has to be read from or written to. Be aware that SSDs are not designed to withstand a very frequent and constant random stream of writes; they can only be written over a limited number of times before they start to break down. Heavy use of a page file is not a particularly good workload for an SSD. You should install an SSD in combination with a large amount of RAM if you want maximum performance while preserving the longevity of the SSD. Use a newer system architecture: Depending on the age of your system, you may be using an out of date system architecture. The “system architecture” is generally defined as the “generation” (think generations like children, parents, grandparents, etc.) of the motherboard and CPU. Newer generations generally support faster I/O (input/output), better memory bandwidth, lower latency, and less contention over shared resources, instead providing dedicated links between components. For example, starting with the “Nehalem” generation (around 2009), the Front-Side Bus (FSB) was eliminated, which removed a common bottleneck, because almost all system components had to share the same FSB for transmitting data. This was replaced with a “point to point” architecture, meaning that each component gets its own dedicated “lane” to the CPU, which continues to be improved every few years with new generations. You will generally see a more significant improvement in overall system performance depending on the “gap” between your computer’s architecture and the latest one available. For example, a Pentium 4 architecture from 2004 is going to see a much more significant improvement upgrading to “Haswell” (the latest as of Q4 2013) than a “Sandy Bridge” architecture from ~2010. Links Related questions: How to reduce disk thrashing (paging)? Windows Swap (Page File): Enable or Disable? Also, just in case you’re considering it, you really shouldn’t disable the page file, as this will only make matters worse; see here. And, in case you needed extra convincing to leave the Windows Page File alone, see here and here. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Working with Timelines with LINQ to Twitter

    - by Joe Mayo
    When first working with the Twitter API, I thought that using SinceID would be an effective way to page through timelines. In practice it doesn’t work well for various reasons. To explain why, Twitter published an excellent document that is a must-read for anyone working with timelines: Twitter Documentation: Working with Timelines This post shows how to implement the recommended strategies in that document by using LINQ to Twitter. You should read the document in it’s entirety before moving on because my explanation will start at the bottom and work back up to the top in relation to the Twitter document. What follows is an explanation of SinceID, MaxID, and how they come together to help you efficiently work with Twitter timelines. The Role of SinceID Specifying SinceID says to Twitter, “Don’t return tweets earlier than this”. What you want to do is store this value after every timeline query set so that it can be reused on the next set of queries.  The next section will explain what I mean by query set, but a quick explanation is that it’s a loop that gets all new tweets. The SinceID is a backstop to avoid retrieving tweets that you already have. Here’s some initialization code that includes a variable named sinceID that will be used to populate the SinceID property in subsequent queries: // last tweet processed on previous query set ulong sinceID = 210024053698867204; ulong maxID; const int Count = 10; var statusList = new List<status>(); Here, I’ve hard-coded the sinceID variable, but this is where you would initialize sinceID from whatever storage you choose (i.e. a database). The first time you ever run this code, you won’t have a value from a previous query set. Initially setting it to 0 might sound like a good idea, but what if you’re querying a timeline with lots of tweets? Because of the number of tweets and rate limits, your query set might take a very long time to run. A caveat might be that Twitter won’t return an entire timeline back to Tweet #0, but rather only go back a certain period of time, the limits of which are documented for individual Twitter timeline API resources. So, to initialize SinceID at too low of a number can result in a lot of initial tweets, yet there is a limit to how far you can go back. What you’re trying to accomplish in your application should guide you in how to initially set SinceID. I have more to say about SinceID later in this post. The other variables initialized above include the declaration for MaxID, Count, and statusList. The statusList variable is a holder for all the timeline tweets collected during this query set. You can set Count to any value you want as the largest number of tweets to retrieve, as defined by individual Twitter timeline API resources. To effectively page results, you’ll use the maxID variable to set the MaxID property in queries, which I’ll discuss next. Initializing MaxID On your first query of a query set, MaxID will be whatever the most recent tweet is that you get back. Further, you don’t know what MaxID is until after the initial query. The technique used in this post is to do an initial query and then use the results to figure out what the next MaxID will be.  Here’s the code for the initial query: var userStatusResponse = (from tweet in twitterCtx.Status where tweet.Type == StatusType.User && tweet.ScreenName == "JoeMayo" && tweet.SinceID == sinceID && tweet.Count == Count select tweet) .ToList(); statusList.AddRange(userStatusResponse); // first tweet processed on current query maxID = userStatusResponse.Min( status => ulong.Parse(status.StatusID)) - 1; The query above sets both SinceID and Count properties. As explained earlier, Count is the largest number of tweets to return, but the number can be less. A couple reasons why the number of tweets that are returned could be less than Count include the fact that the user, specified by ScreenName, might not have tweeted Count times yet or might not have tweeted at least Count times within the maximum number of tweets that can be returned by the Twitter timeline API resource. Another reason could be because there aren’t Count tweets between now and the tweet ID specified by sinceID. Setting SinceID constrains the results to only those tweets that occurred after the specified Tweet ID, assigned via the sinceID variable in the query above. The statusList is an accumulator of all tweets receive during this query set. To simplify the code, I left out some logic to check whether there were no tweets returned. If  the query above doesn’t return any tweets, you’ll receive an exception when trying to perform operations on an empty list. Yeah, I cheated again. Besides querying initial tweets, what’s important about this code is the final line that sets maxID. It retrieves the lowest numbered status ID in the results. Since the lowest numbered status ID is for a tweet we already have, the code decrements the result by one to keep from asking for that tweet again. Remember, SinceID is not inclusive, but MaxID is. The maxID variable is now set to the highest possible tweet ID that can be returned in the next query. The next section explains how to use MaxID to help get the remaining tweets in the query set. Retrieving Remaining Tweets Earlier in this post, I defined a term that I called a query set. Essentially, this is a group of requests to Twitter that you perform to get all new tweets. A single query might not be enough to get all new tweets, so you’ll have to start at the top of the list that Twitter returns and keep making requests until you have all new tweets. The previous section showed the first query of the query set. The code below is a loop that completes the query set: do { // now add sinceID and maxID userStatusResponse = (from tweet in twitterCtx.Status where tweet.Type == StatusType.User && tweet.ScreenName == "JoeMayo" && tweet.Count == Count && tweet.SinceID == sinceID && tweet.MaxID == maxID select tweet) .ToList(); if (userStatusResponse.Count > 0) { // first tweet processed on current query maxID = userStatusResponse.Min( status => ulong.Parse(status.StatusID)) - 1; statusList.AddRange(userStatusResponse); } } while (userStatusResponse.Count != 0 && statusList.Count < 30); Here we have another query, but this time it includes the MaxID property. The SinceID property prevents reading tweets that we’ve already read and Count specifies the largest number of tweets to return. Earlier, I mentioned how it was important to check how many tweets were returned because failing to do so will result in an exception when subsequent code runs on an empty list. The code above protects against this problem by only working with the results if Twitter actually returns tweets. Reasons why there wouldn’t be results include: if the first query got all the new tweets there wouldn’t be more to get and there might not have been any new tweets between the SinceID and MaxID settings of the most recent query. The code for loading the returned tweets into statusList and getting the maxID are the same as previously explained. The important point here is that MaxID is being reset, not SinceID. As explained in the Twitter documentation, paging occurs from the newest tweets to oldest, so setting MaxID lets us move from the most recent tweets down to the oldest as specified by SinceID. The two loop conditions cause the loop to continue as long as tweets are being read or a max number of tweets have been read.  Logically, you want to stop reading when you’ve read all the tweets and that’s indicated by the fact that the most recent query did not return results. I put the check to stop after 30 tweets are reached to keep the demo from running too long – in the console the response scrolls past available buffer and I wanted you to be able to see the complete output. Yet, there’s another point to be made about constraining the number of items you return at one time. The Twitter API has rate limits and making too many queries per minute will result in an error from twitter that LINQ to Twitter raises as an exception. To use the API properly, you’ll have to ensure you don’t exceed this threshold. Looking at the statusList.Count as done above is rather primitive, but you can implement your own logic to properly manage your rate limit. Yeah, I cheated again. Summary Now you know how to use LINQ to Twitter to work with Twitter timelines. After reading this post, you have a better idea of the role of SinceID - the oldest tweet already received. You also know that MaxID is the largest tweet ID to retrieve in a query. Together, these settings allow you to page through results via one or more queries. You also understand what factors affect the number of tweets returned and considerations for potential error handling logic. The full example of the code for this post is included in the downloadable source code for LINQ to Twitter.   @JoeMayo

    Read the article

  • Reading OpenDocument spreadsheets using C#

    - by DigiMortal
    Excel with its file formats is not the only spreadsheet application that is widely used. There are also users on Linux and Macs and often they are using OpenOffice and other open-source office packages that use ODF instead of OpenXML. In this post I will show you how to read Open Document spreadsheet in C#. Importer as example My previous post about importers showed you how to build flexible importers support to your web application. This post introduces you practical example of one of my importers. Of course, sensitive code is omitted. We start with ODS importer class and we add new methods as we go. public class OdsImporter : ImporterBase {     public OdsImporter()     {     }       public override string[] SupportedFileExtensions     {         get { return new[] { "ods" }; }     }       public override ImportResult Import(Stream fileStream, long companyId, short year)     {         string contentXml = GetContentXml(fileStream);           var result = new ImportResult();         var doc = XDocument.Parse(contentXml);           var rows = doc.Descendants("{urn:oasis:names:tc:opendocument:xmlns:table:1.0}table-row").Skip(1);           foreach (var row in rows)         {             ImportRow(row, companyId, year, result);         }           return result;     } } The class given here just extends base class for importers (previous post uses interface but as I already told there you move to abstract base class when writing code for real projects). Import method reads data from *.ods file, parses it (it is XML), finds all data rows and imports data. As you may see then first row is skipped. This is because the first row on my sheet is always headers row. Reading ODS file Our import method starts with getting XML from *.ods file. ODS files like OpenXml files are zipped containers that contain different files. We need content.xml as all data is kept there. To get the contents of file we use SharpZipLib library to read uploaded file as *.zip file. private static string GetContentXml(Stream fileStream) {     var contentXml = "";       using (var zipInputStream = new ZipInputStream(fileStream))     {         ZipEntry contentEntry = null;         while ((contentEntry = zipInputStream.GetNextEntry()) != null)         {             if (!contentEntry.IsFile)                 continue;             if (contentEntry.Name.ToLower() == "content.xml")                 break;         }           if (contentEntry.Name.ToLower() != "content.xml")         {             throw new Exception("Cannot find content.xml");         }           var bytesResult = new byte[] { };         var bytes = new byte[2000];         var i = 0;           while ((i = zipInputStream.Read(bytes, 0, bytes.Length)) != 0)         {             var arrayLength = bytesResult.Length;             Array.Resize<byte>(ref bytesResult, arrayLength + i);             Array.Copy(bytes, 0, bytesResult, arrayLength, i);         }         contentXml = Encoding.UTF8.GetString(bytesResult);     }     return contentXml; } If here is content.xml file then we stop browsing the file. We read this file to memory and return it as UTF-8 format string. Importing rows Our last task is to import rows. We use special method for this as we have to handle some tricks here. To keep files smaller the cell count on row is not always the same. If we have more than one empty cell one after another then ODS keeps only one cell for sequential empty cells. This cell has attribute called number-columns-repeated and it’s value is set to the number of sequential empty cells. This is why we use two indexers for cells collection. private void ImportRow(XElement row, ImportResult result) {     var cells = (from c in row.Descendants()                 where c.Name == "{urn:oasis:names:tc:opendocument:xmlns:table:1.0}table-cell"                 select c).ToList();       var dto = new DataDto();       var count = cells.Count;     var j = -1;       for (var i = 0; i < count; i++)     {         j++;         var cell = cells[i];         var attr = cell.Attribute("{urn:oasis:names:tc:opendocument:xmlns:table:1.0}number-columns-repeated");         if (attr != null)         {             var numToSkip = 0;             if (int.TryParse(attr.Value, out numToSkip))             {                 j += numToSkip - 1;             }         }           if (i > 30) break;         if (j == 0)         {             dto.SomeProperty = cells[i].Value;         }         if (j == 1)         {             dto.SomeOtherProperty = cells[i].Value;         }         // some more data reading     }       // save data } You can define your own class for import results and add there all problems found during data import. Your application gets the results and shows them to user. Conclusion Reading ODS files may seem to complex task but actually it is very easy if we need only data from those documents. We can use some zip-library to get the content file and then parse it to XML. It is not hard to go through the XML but there are some optimization tricks we have to know. The code here is safe to use in web applications as it is not using any API-s that may have special needs to server and infrastructure.

    Read the article

  • ASMLib

    - by wcoekaer
    Oracle ASMlib on Linux has been a topic of discussion a number of times since it was released way back when in 2004. There is a lot of confusion around it and certainly a lot of misinformation out there for no good reason. Let me try to give a bit of history around Oracle ASMLib. Oracle ASMLib was introduced at the time Oracle released Oracle Database 10g R1. 10gR1 introduced a very cool important new features called Oracle ASM (Automatic Storage Management). A very simplistic description would be that this is a very sophisticated volume manager for Oracle data. Give your devices directly to the ASM instance and we manage the storage for you, clustered, highly available, redundant, performance, etc, etc... We recommend using Oracle ASM for all database deployments, single instance or clustered (RAC). The ASM instance manages the storage and every Oracle server process opens and operates on the storage devices like it would open and operate on regular datafiles or raw devices. So by default since 10gR1 up to today, we do not interact differently with ASM managed block devices than we did before with a datafile being mapped to a raw device. All of this is without ASMLib, so ignore that one for now. Standard Oracle on any platform that we support (Linux, Windows, Solaris, AIX, ...) does it the exact same way. You start an ASM instance, it handles storage management, all the database instances use and open that storage and read/write from/to it. There are no extra pieces of software needed, including on Linux. ASM is fully functional and selfcontained without any other components. In order for the admin to provide a raw device to ASM or to the database, it has to have persistent device naming. If you booted up a server where a raw disk was named /dev/sdf and you give it to ASM (or even just creating a tablespace without asm on that device with datafile '/dev/sdf') and next time you boot up and that device is now /dev/sdg, you end up with an error. Just like you can't just change datafile names, you can't change device filenames without telling the database, or ASM. persistent device naming on Linux, especially back in those days ways to say it bluntly, a nightmare. In fact there were a number of issues (dating back to 2004) : Linux async IO wasn't pretty persistent device naming including permissions (had to be owned by oracle and the dba group) was very, very difficult to manage system resource usage in terms of open file descriptors So given the above, we tried to find a way to make this easier on the admins, in many ways, similar to why we started working on OCFS a few years earlier - how can we make life easier for the admins on Linux. A feature of Oracle ASM is the ability for third parties to write an extension using what's called ASMLib. It is possible for any third party OS or storage vendor to write a library using a specific Oracle defined interface that gets used by the ASM instance and by the database instance when available. This interface offered 2 components : Define an IO interface - allow any IO to the devices to go through ASMLib Define device discovery - implement an external way of discovering, labeling devices to provide to ASM and the Oracle database instance This is similar to a library that a number of companies have implemented over many years called libODM (Oracle Disk Manager). ODM was specified many years before we introduced ASM and allowed third party vendors to implement their own IO routines so that the database would use this library if installed and make use of the library open/read/write/close,.. routines instead of the standard OS interfaces. PolyServe back in the day used this to optimize their storage solution, Veritas used (and I believe still uses) this for their filesystem. It basically allowed, in particular, filesystem vendors to write libraries that could optimize access to their storage or filesystem.. so ASMLib was not something new, it was basically based on the same model. You have libodm for just database access, you have libasm for asm/database access. Since this library interface existed, we decided to do a reference implementation on Linux. We wrote an ASMLib for Linux that could be used on any Linux platform and other vendors could see how this worked and potentially implement their own solution. As I mentioned earlier, ASMLib and ODMLib are libraries for third party extensions. ASMLib for Linux, since it was a reference implementation implemented both interfaces, the storage discovery part and the IO part. There are 2 components : Oracle ASMLib - the userspace library with config tools (a shared object and some scripts) oracleasm.ko - a kernel module that implements the asm device for /dev/oracleasm/* The userspace library is a binary-only module since it links with and contains Oracle header files but is generic, we only have one asm library for the various Linux platforms. This library is opened by Oracle ASM and by Oracle database processes and this library interacts with the OS through the asm device (/dev/asm). It can install on Oracle Linux, on SuSE SLES, on Red Hat RHEL,.. The library itself doesn't actually care much about the OS version, the kernel module and device cares. The support tools are simple scripts that allow the admin to label devices and scan for disks and devices. This way you can say create an ASM disk label foo on, currently /dev/sdf... So if /dev/sdf disappears and next time is /dev/sdg, we just scan for the label foo and we discover it as /dev/sdg and life goes on without any worry. Also, when the database needs access to the device, we don't have to worry about file permissions or anything it will be taken care of. So it's a convenience thing. The kernel module oracleasm.ko is a Linux kernel module/device driver. It implements a device /dev/oracleasm/* and any and all IO goes through ASMLib - /dev/oracleasm. This kernel module is obviously a very specific Oracle related device driver but it was released under the GPL v2 so anyone could easily build it for their Linux distribution kernels. Advantages for using ASMLib : A good async IO interface for the database, the entire IO interface is based on an optimal ASYNC model for performance A single file descriptor per Oracle process, not one per device or datafile per process reducing # of open filehandles overhead Device scanning and labeling built-in so you do not have to worry about messing with udev or devlabel, permissions or the likes which can be very complex and error prone. Just like with OCFS and OCFS2, each kernel version (major or minor) has to get a new version of the device drivers. We started out building the oracleasm kernel module rpms for many distributions, SLES (in fact in the early days still even for this thing called United Linux) and RHEL. The driver didn't make sense to get pushed into upstream Linux because it's unique and specific to the Oracle database. As it takes a huge effort in terms of build infrastructure and QA and release management to build kernel modules for every architecture, every linux distribution and every major and minor version we worked with the vendors to get them to add this tiny kernel module to their infrastructure. (60k source code file). The folks at SuSE understood this was good for them and their customers and us and added it to SLES. So every build coming from SuSE for SLES contains the oracleasm.ko module. We weren't as successful with other vendors so for quite some time we continued to build it for RHEL and of course as we introduced Oracle Linux end of 2006 also for Oracle Linux. With Oracle Linux it became easy for us because we just added the code to our build system and as we churned out Oracle Linux kernels whether it was for a public release or for customers that needed a one off fix where they also used asmlib, we didn't have to do any extra work it was just all nicely integrated. With the introduction of Oracle Linux's Unbreakable Enterprise Kernel and our interest in being able to exploit ASMLib more, we started working on a very exciting project called Data Integrity. Oracle (Martin Petersen in particular) worked for many years with the T10 standards committee and storage vendors and implemented Linux kernel support for DIF/DIX, data protection in the Linux kernel, note to those that wonder, yes it's all in mainline Linux and under the GPL. This basically gave us all the features in the Linux kernel to checksum a data block, send it to the storage adapter, which can then validate that block and checksum in firmware before it sends it over the wire to the storage array, which can then do another checksum and to the actual DISK which does a final validation before writing the block to the physical media. So what was missing was the ability for a userspace application (read: Oracle RDBMS) to write a block which then has a checksum and validation all the way down to the disk. application to disk. Because we have ASMLib we had an entry into the Linux kernel and Martin added support in ASMLib (kernel driver + userspace) for this functionality. Now, this is all based on relatively current Linux kernels, the oracleasm kernel module depends on the main kernel to have support for it so we can make use of it. Thanks to UEK and us having the ability to ship a more modern, current version of the Linux kernel we were able to introduce this feature into ASMLib for Linux from Oracle. This combined with the fact that we build the asm kernel module when we build every single UEK kernel allowed us to continue improving ASMLib and provide it to our customers. So today, we (Oracle) provide Oracle ASMLib for Oracle Linux and in particular on the Unbreakable Enterprise Kernel. We did the build/testing/delivery of ASMLib for RHEL until RHEL5 but since RHEL6 decided that it was too much effort for us to also maintain all the build and test environments for RHEL and we did not have the ability to use the latest kernel features to introduce the Data Integrity features and we didn't want to end up with multiple versions of asmlib as maintained by us. SuSE SLES still builds and comes with the oracleasm module and they do all the work and RHAT it certainly welcome to do the same. They don't have to rebuild the userspace library, it's really about the kernel module. And finally to re-iterate a few important things : Oracle ASM does not in any way require ASMLib to function completely. ASMlib is a small set of extensions, in particular to make device management easier but there are no extra features exposed through Oracle ASM with ASMLib enabled or disabled. Often customers confuse ASMLib with ASM. again, ASM exists on every Oracle supported OS and on every supported Linux OS, SLES, RHEL, OL withoutASMLib Oracle ASMLib userspace is available for OTN and the kernel module is shipped along with OL/UEK for every build and by SuSE for SLES for every of their builds ASMLib kernel module was built by us for RHEL4 and RHEL5 but we do not build it for RHEL6, nor for the OL6 RHCK kernel. Only for UEK ASMLib for Linux is/was a reference implementation for any third party vendor to be able to offer, if they want to, their own version for their own OS or storage ASMLib as provided by Oracle for Linux continues to be enhanced and evolve and for the kernel module we use UEK as the base OS kernel hope this helps.

    Read the article

  • CodePlex Daily Summary for Saturday, February 26, 2011

    CodePlex Daily Summary for Saturday, February 26, 2011Popular ReleasesDirectQ: Release 1.8.7 Beta 2: Beta 2 release to fix some early reported problems with the original 1.8.7 Beta.Chiave File Encryption: Chiave 0.9.2: Release Notes Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.1 to 0.9.2: ==================== Added: > Now it displays number of files added in the wizard to the Window Title bar. > Added support to Windows XP. > Minor UI tweaks. I...Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...HFR7 - Forum Hardware.fr pour Windows Phone 7: HFR7 - v1.1.1: NOUVELLES FONCTIONS : - Aucune. AMÉLIORATIONS : - La page "Catégories" est désormais intégrée au pivot "Bienvenue". - Apparition de boutons de changement de page en bas du sujet en consultation. - Les en-têtes sur les sujets sont désormais de la même couleur que la couleur d'accentuation de votre téléphone. BUGFIXES : - Les catégories s'affichent correctement. - Cliquer sur le bouton "drapeau" alors qu'on est dans la liste des topics d'une page n'amenait pas directement au dernier post non ...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationsMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...patterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...PhoneyTools: Initial Release (0.1): This is the 0.1 version for preview of the features.Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.Smartkernel: Smartkernel: ????,??????Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Silverlight????[???]: silverlight????[???]2.0: ???????,?????,????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...New Projectsconvert digit to word upto thousand: convert digit to word upto thousandCustom XSLT with recursive loop in Biztalk 2009: Custom XSLT with recursive loop in Biztalk 2009ECO contrib: ECO ist a excellent framework for domain driven design developed by CapableObjects AB. Share your additional features in this contrib project.euler21: euler 21euler22: euler 22 problemflowless: Some workflow thingHFR7 - Forum Hardware.fr pour Windows Phone 7: HFR7 vous permet de surfer sur le forum de Hardware.fr via votre Windows Phone. Il est développé sous Silverlight (C#/XAML).ISP.NET: ISP.NET is a code level verification tool for MPI programs. It includes a Visual Studio 2010 extension that allows for push button verification of user programs that are written in C, C++ and C#. ISP checks for deadlocks, assertion violations, and other MPI program issues. IVY Frameworks: Ivy Frameworks is an architectural framework to create multi-tire application in a consistent way. We are creating specific application blocks. When completed it will help to create a software development pattern, to mass produce .Net applications in a software factory model. Jobeet: Just another Symfony Tutorial I'm following.Lurity: Project Codename "Lurity".Metro Toolkit: Metro ToolkitMySchoolManager: MySchoolManager es un programa de fines didácticos, de código fuente abierto y documentado en español, que simula un sistema de administración del personal de una escuela. NewRapp: Project at KTH in course DD2388NHibernateCMS: NHibernateCMSParametero - Yet Another Console Arguments Parsing Library: Parametero - Yet Another Console Arguments Parsing LibraryRasifiel's test: Test projectSilverlight Gantt Chart: Don't waste time creating your own Gantt Chart. We've already done it!SKWebSite: This is my first ASP.NET MVC3 projectTechChat: TechChat is a ASP.net AJAX based stylish chat room. It demonstrates the use of database and use of AJAX. It is developed in VB.netUDK Development Kit Addons: UDK Development Kit Addons makes it easier for UDK users to develop and debug UDK scripts. It's developed in C# with using Visual Studio Shell.UltraLight.mvvm Windows Phone 7 MVVM Framework: A lightweight (< 300 lines, < 25KB) framework for developing MVVM Silverlight applications with support for tombstoning on the Windows Phone 7.Website Panel: Website PanelxMS (eXtensible Management System): The xMS is a simple console that can be extended using plugins. Those plugins can be written by developers using a simple interface. It's a good starting for who want to develop a plugin based application.Xna Midi Project: A project that will allow midi functionality using only the compact framework for windows and Xbox solutions.

    Read the article

  • Passing Strings by Ref

    - by SGWellens
    Humbled yet again…DOH! No matter how much experience you acquire, no matter how smart you may be, no matter how hard you study, it is impossible to keep fully up to date on all the nuances of the technology we are exposed to. There will always be gaps in our knowledge: Little 'dead zones' of uncertainty. For me, this time, it was about passing string parameters to functions. I thought I knew this stuff cold. First, a little review... Value Types and Ref Integers and structs are value types (as opposed to reference types). When declared locally, their memory storage is on the stack; not on the heap. When passed to a function, the function gets a copy of the data and works on the copy. If a function needs to change a value type, you need to use the ref keyword.  Here's an example:     // ---- declaration -----------------     public struct MyStruct    {        public string StrTag;    }     // ---- functions -----------------------     void SetMyStruct(MyStruct myStruct)     // pass by value    {        myStruct.StrTag = "BBB";    }     void SetMyStruct(ref MyStruct myStruct)  // pass by ref    {        myStruct.StrTag = "CCC";    }     // ---- Usage -----------------------     protected void Button1_Click(object sender, EventArgs e)    {        MyStruct Data;        Data.StrTag = "AAA";         SetMyStruct(Data);        // Data.StrTag is still "AAA"         SetMyStruct(ref Data);        // Data.StrTag is now "CCC"    } No surprises here. All value types like ints, floats, datetimes, enums, structs, etc. work the same way. And now on to... Class Types and Ref     // ---- Declaration -----------------------------     public class MyClass    {        public string StrTag;    }     // ---- Functions ----------------------------     void SetMyClass(MyClass myClass)  // pass by 'value'    {        myClass.StrTag = "BBB";    }     void SetMyClass(ref MyClass myClass)   // pass by ref    {        myClass.StrTag = "CCC";    }     // ---- Usage ---------------------------------------     protected void Button2_Click(object sender, EventArgs e)    {        MyClass Data = new MyClass();        Data.StrTag = "AAA";         SetMyClass(Data);          // Data.StrTag is now "BBB"         SetMyClass(ref Data);        // Data.StrTag is now "CCC"    }  No surprises here either. Since Classes are reference types, you do not need the ref keyword to modify an object. What may seem a little strange is that with or without the ref keyword, the results are the same: The compiler knows what to do. So, why would you need to use the ref keyword when passing an object to a function? Because then you can change the reference itself…ie you can make it refer to a completely different object. Inside the function you can do: myClass = new MyClass() and the old object will be garbage collected and the new object will be returned to the caller. That ends the review. Now let's look at passing strings as parameters. The String Type and Ref Strings are reference types. So when you pass a String to a function, you do not need the ref keyword to change the string. Right? Wrong. Wrong, wrong, wrong. When I saw this, I was so surprised that I fell out of my chair. Getting up, I bumped my head on my desk (which really hurt). My bumping the desk caused a large speaker to fall off of a bookshelf and land squarely on my big toe. I was screaming in pain and hopping on one foot when I lost my balance and fell. I struck my head on the side of the desk (once again) and knocked myself out cold. When I woke up, I was in the hospital where due to a database error (thanks Oracle) the doctors had put casts on both my hands. I'm typing this ever so slowly with just my ton..tong ..tongu…tongue. But I digress. Okay, the only true part of that story is that I was a bit surprised. Here is what happens passing a String to a function.     // ---- Functions ----------------------------     void SetMyString(String myString)   // pass by 'value'    {        myString = "BBB";    }     void SetMyString(ref String myString)  // pass by ref    {        myString = "CCC";    }     // ---- Usage ---------------------------------     protected void Button3_Click(object sender, EventArgs e)    {        String MyString = "AAA";         SetMyString(MyString);        // MyString is still "AAA"  What!!!!         SetMyString(ref MyString);        // MyString is now "CCC"    } What the heck. We should not have to use the ref keyword when passing a String because Strings are reference types. Why didn't the string change? What is going on?   I spent hours unssuccessfully researching this anomaly until finally, I had a Eureka moment: This code: String MyString = "AAA"; Is semantically equivalent to this code (note this code doesn't actually compile): String MyString = new String(); MyString = "AAA"; Key Point: In the function, the copy of the reference is pointed to a new object and THAT object is modified. The original reference and what it points to is unchanged. You can simulate this behavior by modifying the class example code to look like this:      void SetMyClass(MyClass myClass)  // call by 'value'    {        //myClass.StrTag = "BBB";        myClass = new MyClass();        myClass.StrTag = "BBB";    } Now when you call the SetMyClass function without using ref, the parameter is unchanged...just like the string example.  I hope someone finds this useful. Steve Wellens

    Read the article

  • Particle and Physics problem.

    - by Quincy
    This was originally a forum post so I hope you guys don't mind it being 2 questions in one. I am making a game and I got some basic physics implemented. I have 2 problems, 1 with particles being drawn in the wrong place and one with going through walls while jumping in corners. Skip over to about 15 sec video showing the 2 problems : http://youtube.com/watch?v=Tm9nfWsWfiM So the problem with the particles seems to be coming from the removal, as soon as I remove that piece of code it instantly works, but there shouldn't be a problem since they shouldn't even draw when their energy gets to 0 (and then they get removed) So my first question is, how are these particles getting warped all over the screen ? Relevant code : Particle class : class Particle { //Physics public Vector2 position = new Vector2(0,0); public float direction = 180; public float speed = 100; public float energy = 1; protected float startEnergy = 1; //Visual public Sprite sprite; public float rotation = 0; public float scale = 1; public byte alpha = 255; public BlendMode blendMode { get { return sprite.BlendMode; } set { sprite.BlendMode = value; } } public Particle() { } public virtual void Think(float frameTime) { if (energy - frameTime < 0) energy = 0; else energy -= frameTime; position += new Vector2((float)Math.Cos(MathHelper.DegToRad(direction)), (float)Math.Sin(MathHelper.DegToRad(direction))) * speed * frameTime; alpha = (byte)(255 * energy / startEnergy); sprite.Rotation = rotation; sprite.Position = position; sprite.Color = new Color(sprite.Color.R, sprite.Color.G, sprite.Color.B, alpha); } public virtual void Draw(float frameTime) { if (energy > 0) { World.camera.DrawSprite(sprite); } } // Basic particle implementation class BasicSprite : Particle { public BasicSprite(Sprite _sprite) { sprite = _sprite; } } Emitter : class Emitter { protected static Random rand = new Random(); protected List<Particle> particles = new List<Particle>(); public BaseEntity target = null; public Vector2 position = new Vector2(0, 0); public bool Active = true; public float timeAlive = 0; public int particleCount = 0; public int ParticlesPerSeccond { get { return (int)(1 / particleSpawnTime); } set { particleSpawnTime = 1 / (float)value; } } public float dieTime = float.MaxValue; float particleSpawnTime = 0.05f; float spawnTime = 0; public Emitter() { } public virtual void Think(float frametime) { spawnTime += frametime; if (dieTime != float.MaxValue) { timeAlive += frametime; if (timeAlive >= dieTime) Active = false; } if (Active) { if (target != null) position = target.Position; while (spawnTime > particleSpawnTime) { spawnTime -= particleSpawnTime; AddParticle(); particleCount++; } } for (int i = 0; i < particles.Count; i++) { particles[i].Think(frametime); if (particles[i].energy <= 0) { particles.Remove(particles[i]); // As soon as this is removed, it works particleCount--; } } } public virtual void AddParticle() { } public virtual void Draw(float frametime) { foreach (Particle particle in particles) { particle.Draw(frametime); } } } class BloodEmitter : Emitter { Image image; public BloodEmitter() { image = new Image(@"Content/Particles/TinyCircle.png"); image.CreateMaskFromColor(new Color(255, 0, 255, 255)); this.dieTime = 0.5f; this.ParticlesPerSeccond = 100; } public override void AddParticle() { Sprite sprite = new Sprite(image); sprite.Color = new Color((byte)(rand.NextDouble() * 255), (byte)(rand.NextDouble() * 255), (byte)(rand.NextDouble() * 255)); BasicSprite particle = new BasicSprite(sprite); particle.direction = (float)rand.NextDouble() * 360; particle.position = position; particle.blendMode = BlendMode.Alpha; particles.Add(particle); } } The seccond problem is the physics problem, for some reason I can get through the right bottom corner while jumping. I think this is coming from me switching animations but I thought I made it compensate for that. Relevant code : PhysicsEntity : class PhysicsEntity : BaseEntity { // Horizontal movement constants protected const float maxHorizontalSpeed = 1000; protected const float horizontalAcceleration = 15; protected const float horizontalDragAir = 0.95f; protected const float horizontalDragGround = 0.95f; // Vertical movement constants protected const float maxVerticalSpeed = 1000; protected const float verticalAcceleration = 20; // Everything needed for movement and correct animations protected float movement = 0; protected bool onGround = false; protected Vector2 Velocity = new Vector2(0, 0); protected float maxSpeed = 0; float lastThink = 0; float thinkTime = 1f/60f; public PhysicsEntity(Vector2 position, Sprite sprite) : base(position, sprite) { } public override void Draw(float frameTime) { base.Draw(frameTime); } public override void Think(float frameTime) { CalculateMovement(frameTime); base.Think(frameTime); } protected void CalculateMovement(float frameTime) { lastThink += frameTime; while (lastThink > thinkTime) { onGround = false; Velocity.X = MathHelper.Clamp(Velocity.X + horizontalAcceleration * movement, -maxHorizontalSpeed, maxHorizontalSpeed); if (onGround) Velocity.X *= horizontalDragGround; else Velocity.X *= horizontalDragAir; if (maxSpeed < Velocity.X) maxSpeed = Velocity.X; Velocity.Y = MathHelper.Clamp(Velocity.Y + verticalAcceleration, -maxVerticalSpeed, maxVerticalSpeed); lastThink -= thinkTime; DoCollisions(thinkTime); DoAnimations(thinkTime); } } public virtual void DoAnimations(float frameTime) { } public void DoCollisions(float frameTime) { Position.Y += Velocity.Y * frameTime; Vector2 tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.Y += collisionDepth.Y; if (collisionDepth.Y < 0) onGround = true; Velocity.Y = 0; } Position.X += Velocity.X * frameTime; tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.X += collisionDepth.X; Velocity.X = 0; } } public void DoCollisions(Vector2 difference) { CollisionRectangle.Y = Position.Y - difference.Y; CollisionRectangle.Height += difference.Y; Vector2 tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.Y += collisionDepth.Y; if (collisionDepth.Y < 0) onGround = true; Velocity.Y = 0; } CollisionRectangle.X = Position.X - difference.X; CollisionRectangle.Width += difference.X; tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.X += collisionDepth.X; Velocity.X = 0; } } Vector2 GetTileCollision() { int topLeftTileX = (int)(CollisionRectangle.TopLeft.X / World.tileEngine.TileWidth); int topLeftTileY = (int)(CollisionRectangle.TopLeft.Y / World.tileEngine.TileHeight); int BottomRightTileX = (int)(CollisionRectangle.DownRight.X / World.tileEngine.TileWidth); int BottomRightTileY = (int)(CollisionRectangle.DownRight.Y / World.tileEngine.TileHeight); if (CollisionRectangle.DownRight.Y % World.tileEngine.TileHeight == 0) // If your exactly against the tile don't count that as being inside the tile BottomRightTileY -= 1; if (CollisionRectangle.DownRight.X % World.tileEngine.TileWidth == 0) // If your exactly against the tile don't count that as being inside the tile BottomRightTileX -= 1; for (int i = topLeftTileX; i <= BottomRightTileX; i++) { for (int j = topLeftTileY; j <= BottomRightTileY; j++) { if (World.tileEngine.TileIsSolid(i, j)) { return new Vector2(i, j); } } } return new Vector2(-1, -1); } } Player : enum State { Standing, Running, Jumping, Falling, Sliding, WallSlide } class Player : PhysicsEntity { private State state { get { return currentState; } set { if (currentState != value) { currentState = value; animationChanged = true; } } } private State currentState = State.Standing; private BasicEmitter basicEmitter = new BasicEmitter(); public bool flipped; public bool animationChanged = false; protected const float jumpPower = 600; AnimationManager animationManager; Rectangle DrawRectangle; public override Rectangle CollisionRectangle { get { return new Rectangle( Position.X - DrawRectangle.Width / 2f, Position.Y - DrawRectangle.Height / 2f, DrawRectangle.Width, DrawRectangle.Height ); } } public Player(Vector2 position, Sprite sprite) : base(position, sprite) { // Only posted the relevant bit DrawRectangle = animationManager.currentAnimation.drawingRectangle; } public override void Draw(float frameTime) { World.camera.DrawSprite( Sprite, Position + new Vector2(DrawRectangle.X, DrawRectangle.Y), animationManager.currentAnimation.drawingRectangle ); } public override void Think(float frameTime) { //I only posted the relevant stuff if (animationChanged) { // if the animation has changed make sure we compensate for the change in with and height animationChanged = false; DoCollisions(animationManager.getSizeDifference()); } DoCustomMovement(); base.Think(frameTime); if (!onGround && Velocity.Y > 0) { state = State.Falling; } } void DoCustomMovement() { if (onGround) { if (World.renderWindow.Input.IsKeyDown(KeyCode.W)) { Velocity.Y = -jumpPower; state = State.Jumping; } } } public override void DoAnimations(float frameTime) { string stateName = Enum.GetName(typeof(State), state); if (!animationManager.currentAnimationIs(stateName)) { animationManager.PlayAnimation(stateName); } animationManager.Think(frameTime); DrawRectangle = animationManager.currentAnimation.drawingRectangle; Sprite.Center = new Vector2( DrawRectangle.X + DrawRectangle.Width / 2, DrawRectangle.Y + DrawRectangle.Height / 2 ); Sprite.FlipX(flipped); } So why am I warping through walls ? I have given this some thought but I just can't seem to find out why this is happening. Full source if needed : source : http://www.mediafire.com/?rc7ddo09gnr68zd (download link)

    Read the article

  • Toon shader with Texture. Can this be optimized?

    - by Alex
    I am quite new to OpenGL, I have managed after long trial and error to integrate Nehe's Cel-Shading rendering with my Model loaders, and have them drawn using the Toon shade and outline AND their original texture at the same time. The result is actually a very nice Cel Shading effect of the model texture, but it is havling the speed of the program, it's quite very slow even with just 3 models on screen... Since the result was kind of hacked together, I am thinking that maybe I am performing some extra steps or extra rendering tasks that maybe are not needed, and are slowing down the game? Something unnecessary that maybe you guys could spot? Both MD2 and 3DS loader have an InitToon() function called upon creation to load the shader initToon(){ int i; // Looping Variable ( NEW ) char Line[255]; // Storage For 255 Characters ( NEW ) float shaderData[32][3]; // Storate For The 96 Shader Values ( NEW ) FILE *In = fopen ("Shader.txt", "r"); // Open The Shader File ( NEW ) if (In) // Check To See If The File Opened ( NEW ) { for (i = 0; i < 32; i++) // Loop Though The 32 Greyscale Values ( NEW ) { if (feof (In)) // Check For The End Of The File ( NEW ) break; fgets (Line, 255, In); // Get The Current Line ( NEW ) shaderData[i][0] = shaderData[i][1] = shaderData[i][2] = float(atof (Line)); // Copy Over The Value ( NEW ) } fclose (In); // Close The File ( NEW ) } else return false; // It Went Horribly Horribly Wrong ( NEW ) glGenTextures (1, &shaderTexture[0]); // Get A Free Texture ID ( NEW ) glBindTexture (GL_TEXTURE_1D, shaderTexture[0]); // Bind This Texture. From Now On It Will Be 1D ( NEW ) // For Crying Out Loud Don't Let OpenGL Use Bi/Trilinear Filtering! ( NEW ) glTexParameteri (GL_TEXTURE_1D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri (GL_TEXTURE_1D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage1D (GL_TEXTURE_1D, 0, GL_RGB, 32, 0, GL_RGB , GL_FLOAT, shaderData); // Upload ( NEW ) } This is the drawing for the animated MD2 model: void MD2Model::drawToon() { float outlineWidth = 3.0f; // Width Of The Lines ( NEW ) float outlineColor[3] = { 0.0f, 0.0f, 0.0f }; // Color Of The Lines ( NEW ) // ORIGINAL PART OF THE FUNCTION //Figure out the two frames between which we are interpolating int frameIndex1 = (int)(time * (endFrame - startFrame + 1)) + startFrame; if (frameIndex1 > endFrame) { frameIndex1 = startFrame; } int frameIndex2; if (frameIndex1 < endFrame) { frameIndex2 = frameIndex1 + 1; } else { frameIndex2 = startFrame; } MD2Frame* frame1 = frames + frameIndex1; MD2Frame* frame2 = frames + frameIndex2; //Figure out the fraction that we are between the two frames float frac = (time - (float)(frameIndex1 - startFrame) / (float)(endFrame - startFrame + 1)) * (endFrame - startFrame + 1); // I ADDED THESE FROM NEHE'S TUTORIAL FOR FIRST PASS (TOON SHADE) glHint (GL_LINE_SMOOTH_HINT, GL_NICEST); // Use The Good Calculations ( NEW ) glEnable (GL_LINE_SMOOTH); // Cel-Shading Code // glEnable (GL_TEXTURE_1D); // Enable 1D Texturing ( NEW ) glBindTexture (GL_TEXTURE_1D, shaderTexture[0]); // Bind Our Texture ( NEW ) glColor3f (1.0f, 1.0f, 1.0f); // Set The Color Of The Model ( NEW ) // ORIGINAL DRAWING CODE //Draw the model as an interpolation between the two frames glBegin(GL_TRIANGLES); for(int i = 0; i < numTriangles; i++) { MD2Triangle* triangle = triangles + i; for(int j = 0; j < 3; j++) { MD2Vertex* v1 = frame1->vertices + triangle->vertices[j]; MD2Vertex* v2 = frame2->vertices + triangle->vertices[j]; Vec3f pos = v1->pos * (1 - frac) + v2->pos * frac; Vec3f normal = v1->normal * (1 - frac) + v2->normal * frac; if (normal[0] == 0 && normal[1] == 0 && normal[2] == 0) { normal = Vec3f(0, 0, 1); } glNormal3f(normal[0], normal[1], normal[2]); MD2TexCoord* texCoord = texCoords + triangle->texCoords[j]; glTexCoord2f(texCoord->texCoordX, texCoord->texCoordY); glVertex3f(pos[0], pos[1], pos[2]); } } glEnd(); // ADDED THESE FROM NEHE'S FOR SECOND PASS (OUTLINE) glDisable (GL_TEXTURE_1D); // Disable 1D Textures ( NEW ) glEnable (GL_BLEND); // Enable Blending ( NEW ) glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA); // Set The Blend Mode ( NEW ) glPolygonMode (GL_BACK, GL_LINE); // Draw Backfacing Polygons As Wireframes ( NEW ) glLineWidth (outlineWidth); // Set The Line Width ( NEW ) glCullFace (GL_FRONT); // Don't Draw Any Front-Facing Polygons ( NEW ) glDepthFunc (GL_LEQUAL); // Change The Depth Mode ( NEW ) glColor3fv (&outlineColor[0]); // Set The Outline Color ( NEW ) // HERE I AM PARSING THE VERTICES AGAIN (NOT IN THE ORIGINAL FUNCTION) FOR THE OUTLINE AS PER NEHE'S TUT glBegin (GL_TRIANGLES); // Tell OpenGL What We Want To Draw for(int i = 0; i < numTriangles; i++) { MD2Triangle* triangle = triangles + i; for(int j = 0; j < 3; j++) { MD2Vertex* v1 = frame1->vertices + triangle->vertices[j]; MD2Vertex* v2 = frame2->vertices + triangle->vertices[j]; Vec3f pos = v1->pos * (1 - frac) + v2->pos * frac; Vec3f normal = v1->normal * (1 - frac) + v2->normal * frac; if (normal[0] == 0 && normal[1] == 0 && normal[2] == 0) { normal = Vec3f(0, 0, 1); } glNormal3f(normal[0], normal[1], normal[2]); MD2TexCoord* texCoord = texCoords + triangle->texCoords[j]; glTexCoord2f(texCoord->texCoordX, texCoord->texCoordY); glVertex3f(pos[0], pos[1], pos[2]); } } glEnd (); // Tell OpenGL We've Finished glDepthFunc (GL_LESS); // Reset The Depth-Testing Mode ( NEW ) glCullFace (GL_BACK); // Reset The Face To Be Culled ( NEW ) glPolygonMode (GL_BACK, GL_FILL); // Reset Back-Facing Polygon Drawing Mode ( NEW ) glDisable (GL_BLEND); } Whereas this is the drawToon function in the 3DS loader void Model_3DS::drawToon() { float outlineWidth = 3.0f; // Width Of The Lines ( NEW ) float outlineColor[3] = { 0.0f, 0.0f, 0.0f }; // Color Of The Lines ( NEW ) //ORIGINAL CODE if (visible) { glPushMatrix(); // Move the model glTranslatef(pos.x, pos.y, pos.z); // Rotate the model glRotatef(rot.x, 1.0f, 0.0f, 0.0f); glRotatef(rot.y, 0.0f, 1.0f, 0.0f); glRotatef(rot.z, 0.0f, 0.0f, 1.0f); glScalef(scale, scale, scale); // Loop through the objects for (int i = 0; i < numObjects; i++) { // Enable texture coordiantes, normals, and vertices arrays if (Objects[i].textured) glEnableClientState(GL_TEXTURE_COORD_ARRAY); if (lit) glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_VERTEX_ARRAY); // Point them to the objects arrays if (Objects[i].textured) glTexCoordPointer(2, GL_FLOAT, 0, Objects[i].TexCoords); if (lit) glNormalPointer(GL_FLOAT, 0, Objects[i].Normals); glVertexPointer(3, GL_FLOAT, 0, Objects[i].Vertexes); // Loop through the faces as sorted by material and draw them for (int j = 0; j < Objects[i].numMatFaces; j ++) { // Use the material's texture Materials[Objects[i].MatFaces[j].MatIndex].tex.Use(); // AFTER THE TEXTURE IS APPLIED I INSERT THE TOON FUNCTIONS HERE (FIRST PASS) glHint (GL_LINE_SMOOTH_HINT, GL_NICEST); // Use The Good Calculations ( NEW ) glEnable (GL_LINE_SMOOTH); // Cel-Shading Code // glEnable (GL_TEXTURE_1D); // Enable 1D Texturing ( NEW ) glBindTexture (GL_TEXTURE_1D, shaderTexture[0]); // Bind Our Texture ( NEW ) glColor3f (1.0f, 1.0f, 1.0f); // Set The Color Of The Model ( NEW ) glPushMatrix(); // Move the model glTranslatef(Objects[i].pos.x, Objects[i].pos.y, Objects[i].pos.z); // Rotate the model glRotatef(Objects[i].rot.z, 0.0f, 0.0f, 1.0f); glRotatef(Objects[i].rot.y, 0.0f, 1.0f, 0.0f); glRotatef(Objects[i].rot.x, 1.0f, 0.0f, 0.0f); // Draw the faces using an index to the vertex array glDrawElements(GL_TRIANGLES, Objects[i].MatFaces[j].numSubFaces, GL_UNSIGNED_SHORT, Objects[i].MatFaces[j].subFaces); glPopMatrix(); } glDisable (GL_TEXTURE_1D); // Disable 1D Textures ( NEW ) // THIS IS AN ADDED SECOND PASS AT THE VERTICES FOR THE OUTLINE glEnable (GL_BLEND); // Enable Blending ( NEW ) glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA); // Set The Blend Mode ( NEW ) glPolygonMode (GL_BACK, GL_LINE); // Draw Backfacing Polygons As Wireframes ( NEW ) glLineWidth (outlineWidth); // Set The Line Width ( NEW ) glCullFace (GL_FRONT); // Don't Draw Any Front-Facing Polygons ( NEW ) glDepthFunc (GL_LEQUAL); // Change The Depth Mode ( NEW ) glColor3fv (&outlineColor[0]); // Set The Outline Color ( NEW ) for (int j = 0; j < Objects[i].numMatFaces; j ++) { glPushMatrix(); // Move the model glTranslatef(Objects[i].pos.x, Objects[i].pos.y, Objects[i].pos.z); // Rotate the model glRotatef(Objects[i].rot.z, 0.0f, 0.0f, 1.0f); glRotatef(Objects[i].rot.y, 0.0f, 1.0f, 0.0f); glRotatef(Objects[i].rot.x, 1.0f, 0.0f, 0.0f); // Draw the faces using an index to the vertex array glDrawElements(GL_TRIANGLES, Objects[i].MatFaces[j].numSubFaces, GL_UNSIGNED_SHORT, Objects[i].MatFaces[j].subFaces); glPopMatrix(); } glDepthFunc (GL_LESS); // Reset The Depth-Testing Mode ( NEW ) glCullFace (GL_BACK); // Reset The Face To Be Culled ( NEW ) glPolygonMode (GL_BACK, GL_FILL); // Reset Back-Facing Polygon Drawing Mode ( NEW ) glDisable (GL_BLEND); glPopMatrix(); } Finally this is the tex.Use() function that loads a BMP texture and somehow gets blended perfectly with the Toon shading void GLTexture::Use() { glEnable(GL_TEXTURE_2D); // Enable texture mapping glBindTexture(GL_TEXTURE_2D, texture[0]); // Bind the texture as the current one }

    Read the article

  • CodePlex Daily Summary for Thursday, July 31, 2014

    CodePlex Daily Summary for Thursday, July 31, 2014Popular ReleasesDbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksDynamics AX Development tools: Version 1.0.0: Alpha release of the package. I am just combining greate community tools into a package. I have not go through testing every function of the tools. However, feel free to point out if you found any bugs!Asp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityHead First C#: The Quest: The Quest: Stable release of "The Quest" game ( Lab 2 from Head First C#, 3rd edition)TCP/IP Adapter BizTalk 2013: TCPIP Adapter for BizTalk 2013 - Version 1.0: Version 1.0 This is an updated version of the BizTalk 2010 TCP/IP adapter. References have been updated and a new setup (ISLE) has been used. Follow the installation instructions below to install the adapter. Still want to automate step 4, but haven't got to it yet. Installation instructions Make sure to close the BizTalk Administration Console. Just to make sure everything gets refreshed after installation. Download and install the setup. The setup makes sure the adapter will be regis...gicon: gicon HTTP service v1.0.0: core: 1.0.0.26592 service: 1.0.0.27190 Github: http://rynnwang.github.io/gicon/ Github.io: http://rynnwang.github.io/gicon/ Codeplex: http://gicon.codeplex.com .NET required: 2.0 or above. Installation notes: 1. You need to run intallutil command to install ifunction.GuidIconHttpService.exe file as Windows Service 2. You need to update ifunction.GuidIconHttpService.exe.config file in the folder to set correct HTTP URI prefixes. In release zip by default, it is set as http://localhost:20000...TEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titlenewmail_OutlookCOM: newmail_OutlookCOM: First Stable ReleaseSharePoint - Data View Web Part Documenter: Data View Web Part Documenter 1.0: .NET Framework 4 Client Profile required for this to run on your PC. Please see the documentation for running the tool.LOL zmena skinu klienta: LOL jednoduchý menic skinu klienta: Jednoduchý prográmek, který ušetrí cas pri zmene klienta. Nemusí se proklikáva18541855 adresáru :)SSRS Plus+: Latest - SSRS Plus Application and Source Code: This release contains the Beta version with significant changes in comparison to the old release which I am keeping for legacy reasons. At some point a changeover will be made once it has been confirmed that my branch is stable and Mr Bagwan is in agreement also.CS-Script Source: Release v3.8.4: CSScript.Evaluator is migrated to Mono v3.3.0 Added aggregating //css_ignore_ns from the imported scripts cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationDotSpatial: DotSpatial 1.7: DotSpatial.Full - includes all DotSpatial libraries, extensions and DemoMap application DotSpatial.Core - includes only DotSpatial core libraries Entire list of changes see in the issue tracker. Main changes: Improved common stability, optimized memory and speed when loading and rendering shapefiles, fixed some memory leaks in rasters and shape layers. Simplified plugin infrastructure. Now there are predefined implementations for all required components (IStatusControl, IDockManager, IHead...New ProjectsBrilliantORM: ????ORM??,??SQL?????????。???????????。Crafter: ?????? ??? ????Dotnetnuke xblog // Blog, Article, Events, Documents: xBlog is a blog program based on DNN, it has powerful functions and unique design style. In addition to article management function which common blog module hasIn Plain Sight: Embedding plain text into an image so one can hide the text "In Plain Sight". A cursory view into the world of Steganography.JS Koans Visual Studio Friendly Version: A Version of JS koans loaded into Visual StudioMy Troop First: just adding to the siteOFX Parser: Biblioteca desenvolvida em C# que traduz arquivos OFX e gera a instância de uma classe que representa o arquivo. Um exemplo de uso está disponível, assim como aOrchard Custom Code module: This module adds a very simple tool to add custom code in front-end pages head and foot.SPB Export to KeePass Import Conversion: A simple script to convert the .xml-file by konste's "SPB Wallet Export" (https://spbwalletexport.codeplex.com/) into an import format accepted by KeePass 2The unTroublemaker: The unTroublemaker is a troubleshooter program that helps your project quickly find and fix missing dependency issues using simple XML-based specifications.

    Read the article

  • Are your personal insecurities screwing up your internal communications?

    - by Lucy Boyes
    I do some internal comms as part of my job. Quite a lot of it involves talking to people about stuff. I’m spending the next couple of weeks talking to lots of people about internal comms itself, because we haven’t done a lot of audience/user feedback gathering, and it turns out that if you talk to people about how they feel and what they think, you get some pretty interesting insights (and an idea of what to do next that isn’t just based on guesswork and generalising from self). Three things keep coming up from talking to people about what we suck at  in terms of internal comms. And, as far as I can tell, they’re all examples where personal insecurity on the part of the person doing the communicating makes the experience much worse for the people on the receiving end. 1. Spending time telling people how you’re going to do something, not what you’re doing and why Imagine you’ve got to give an update to a lot of people who don’t work in your area or department but do have an interest in what you’re doing (either because they want to know because they’re curious or because they need to know because it’s going to affect their work too). You don’t want to look bad at your job. You want to make them think you’ve got it covered – ideally because you do*. And you want to reassure them that there’s lots of exciting work going on in your area to make [insert thing of choice] happen to [insert thing of choice] so that [insert group of people] will be happy. That’s great! You’re doing a good job and you want to tell people about it. This is good comms stuff right here. However, you’re slightly afraid you might secretly be stupid or lazy or incompetent. And you’re exponentially more afraid that the people you’re talking to might think you’re stupid or lazy or incompetent. Or pointless. Or not-adding-value. Or whatever the thing that’s the worst possible thing to be in your company is. So you open by mentioning all the stuff you’re going to do, spending five minutes or so making sure that everyone knows that you’re DOING lots of STUFF. And the you talk for the rest of the time about HOW you’re going to do the stuff, because that way everyone will know that you’ve thought about this really hard and done tons of planning and had lots of great ideas about process and that you’ve got this one down. That’s the stuff you’ve got to say, right? To prove you’re not fundamentally worthless as a human being? Well, maybe. But probably not. See, the people who need to know how you’re going to do the stuff are the people doing the stuff. And those are the people in your area who you’ve (hopefully-please-for-the-love-of-everything-holy) already talked to in depth about how you’re going to do the thing (because else how could they help do it?). They are the only people who need to know the how**. It’s the difference between strategy and tactics. The people outside of your bubble of stuff-doing need to know the strategy – what it is that you’re doing, why, where you’re going with it, etc. The people on the ground with you need the strategy and the tactics, because else they won’t know how to do the stuff. But the outside people don’t really need the tactics at all. Don’t bother with the how unless your audience needs it. They probably don’t. It might make you feel better about yourself, but it’s much more likely that Bob and Jane are thinking about how long this meeting has gone on for already than how personally impressive and definitely-not-an-idiot you are for knowing how you’re going to do some work. Feeling marginally better about yourself (but, let’s face it, still insecure as heck) is not worth the cost, which in this case is the alienation of your audience. 2. Talking for too long about stuff This is kinda the same problem as the previous problem, only much less specific, and I’ve more or less covered why it’s bad already. Basic motivation: to make people think you’re not an idiot. What you do: talk for a very long time about what you’re doing so as to make it sound like you know what you’re doing and lots about it. What your audience wants: the shortest meaningful update. Some of this is a kill your darlings problem – the stuff you’re doing that seems really nifty to you seems really nifty to you, and thus you want to share it with everyone to show that you’re a smart person who thinks up nifty things to do. The downside to this is that it’s mostly only interesting to you – if other people don’t need to know, they likely also don’t care. Think about how you feel when someone is talking a lot to you about a lot of stuff that they’re doing which is at best tangentially interesting and/or relevant. You’re probably not thinking that they’re really smart and clearly know what they’re doing (unless they’re talking a lot and being really engaging about it, which is not the same as talking a lot). You’re probably thinking about something totally unrelated to the thing they’re talking about. Or the fact that you’re bored. You might even – and this is the opposite of what they’re hoping to achieve by talking a lot about stuff – be thinking they’re kind of an idiot. There’s another huge advantage to paring down what you’re trying to say to the barest possible points – it clarifies your thinking. The lightning talk format, as well as other formats which limit the time and/or number of slides you have to say a thing, are really good for doing this. It’s incredibly likely that your audience in this case (the people who need to know some things about your thing but not all the things about your thing) will get everything they need to know from five minutes of you talking about it, especially if trying to condense ALL THE THINGS into a five-minute talk has helped you get clear in your own mind what you’re doing, what you’re trying to say about what you’re doing and why you’re doing it. The bonus of this is that by being clear in your thoughts and in what you say, and in not taking up lots of people’s time to tell them stuff they don’t really need to know, you actually come across as much, much smarter than the person who talks for half an hour or more about things that are semi-relevant at best. 3. Waiting until you’ve got every detail sorted before announcing a big change to the people affected by it This is the worst crime on the list. It’s also human nature. Announcing uncertainty – that something important is going to happen (big reorganisation, product getting canned, etc.) but you’re not quite sure what or when or how yet – is scary. There are risks to it. Uncertainty makes people anxious. It might even paralyse them. You can’t run a business while you’re figuring out what to do if you’ve paralysed everyone with fear over what the future might bring. And you’re scared that they might think you’re not the right person to be in charge of [thing] if you don’t even know what you’re doing with it. Best not to say anything until you know exactly what’s going to happen and you can reassure them all, right? Nope. The people who are going to be affected by whatever it is that you don’t quite know all the details of yet aren’t stupid***. You wouldn’t have hired them if they were. They know something’s up because you’ve got your guilty face on and you keep pulling people into meeting rooms and looking vaguely worried. Here’s the deal: it’s a lot less stressful for everyone (including you) if you’re up front from the beginning. We took this approach during a recent company-wide reorganisation and got really positive feedback. People would much, much rather be told that something is going to happen but you’re not entirely sure what it is yet than have you wait until it’s all fixed up and then fait accompli the heck out of them. They will tell you this themselves if you ask them. And here’s why: by waiting until you know exactly what’s going on to communicate, you remove any agency that the people that the thing is going to happen to might otherwise have had. I know you’re scared that they might get scared – and that’s natural and kind of admirable – but it’s also patronising and infantilising. Ask someone whether they’d rather work on a project which has an openly uncertain future from the beginning, or one where everything’s great until it gets shut down with no forewarning, and very few people are going to tell you they’d prefer the latter. Uncertainty is humanising. It’s you admitting that you don’t have all the answers, which is great, because no one does. It allows you to be consultative – you can actually ask other people what they think and how they feel and what they’d like to do and what they think you should do, and they’ll thank you for it and feel listened to and respected as people and colleagues. Which is a really good reason to start talking to them about what’s going on as soon as you know something’s going on yourself. All of the above assumes you actually care about talking to the people who work with you and for you, and that you’d like to do the right thing by them. If that’s not the case, you can cheerfully disregard the advice here, but if it is, you might want to think about the ways above – and the inevitable countless other ways – that making internal communication about you and not about your audience could actually be doing the people you’re trying to communicate with a huge disservice. So take a deep breath and talk. For five minutes or so. About the important things. Not the other things. As soon as you possibly can. And you’ll be fine.   *Of course you do. You’re good at your job. Don’t worry. **This might not always be true, but it is most of the time. Other people who need to know the how will either be people who you’ve already identified as needing-to-know and thus part of the same set as the people in you’re area you’ve already discussed this with, or else they’ll ask you. But don’t bring this stuff up unless someone asks for it, because most of the people in the audience really don’t care and you’re wasting their time. ***I mean, they might be. But let’s give them the benefit of the doubt and assume they’re not.

    Read the article

  • Farseer tutorial for the absolute beginners

    - by Bil Simser
    This post is inspired (and somewhat a direct copy) of a couple of posts Emanuele Feronato wrote back in 2009 about Box2D (his tutorial was ActionScript 3 based for Box2D, this is C# XNA for the Farseer Physics Engine). Here’s what we’re building: What is Farseer The Farseer Physics Engine is a collision detection system with realistic physics responses to help you easily create simple hobby games or complex simulation systems. Farseer was built as a .NET version of Box2D (based on the Box2D.XNA port of Box2D). While the constructs and syntax has changed over the years, the principles remain the same. This tutorial will walk you through exactly what Emanuele create for Flash but we’ll be doing it using C#, XNA and the Windows Phone platform. The first step is to download the library from its home on CodePlex. If you have NuGet installed, you can install the library itself using the NuGet package that but we’ll also be using some code from the Samples source that can only be obtained by downloading the library. Once you download and unpacked the zip file into a folder and open the solution, this is what you will get: The Samples XNA WP7 project (and content) have all the demos for Farseer. There’s a wealth of info here and great examples to look at to learn. The Farseer Physics XNA WP7 project contains the core libraries that do all the work. DebugView XNA contains an XNA-ready class to let you view debug data and information in the game draw loop (which you can copy into your project or build the source and reference the assembly). The downloaded version has to be compiled as it’s only available in source format so you can do that now if you want (open the solution file and rebuild everything). If you’re using the NuGet package you can just install that. We only need the core library and we’ll be copying in some code from the samples later. Your first Farseer experiment Start Visual Studio and create a new project using the Windows Phone template can call it whatever you want. It’s time to edit Game1.cs 1 public class Game1 : Game 2 { 3 private readonly GraphicsDeviceManager _graphics; 4 private DebugViewXNA _debugView; 5 private Body _floor; 6 private SpriteBatch _spriteBatch; 7 private float _timer; 8 private World _world; 9 10 public Game1() 11 { 12 _graphics = new GraphicsDeviceManager(this) 13 { 14 PreferredBackBufferHeight = 800, 15 PreferredBackBufferWidth = 480, 16 IsFullScreen = true 17 }; 18 19 Content.RootDirectory = "Content"; 20 21 // Frame rate is 30 fps by default for Windows Phone. 22 TargetElapsedTime = TimeSpan.FromTicks(333333); 23 24 // Extend battery life under lock. 25 InactiveSleepTime = TimeSpan.FromSeconds(1); 26 } 27 28 protected override void LoadContent() 29 { 30 // Create a new SpriteBatch, which can be used to draw textures. 31 _spriteBatch = new SpriteBatch(_graphics.GraphicsDevice); 32 33 // Load our font (DebugViewXNA needs it for the DebugPanel) 34 Content.Load<SpriteFont>("font"); 35 36 // Create our World with a gravity of 10 vertical units 37 if (_world == null) 38 { 39 _world = new World(Vector2.UnitY*10); 40 } 41 else 42 { 43 _world.Clear(); 44 } 45 46 if (_debugView == null) 47 { 48 _debugView = new DebugViewXNA(_world); 49 50 // default is shape, controller, joints 51 // we just want shapes to display 52 _debugView.RemoveFlags(DebugViewFlags.Controllers); 53 _debugView.RemoveFlags(DebugViewFlags.Joint); 54 55 _debugView.LoadContent(GraphicsDevice, Content); 56 } 57 58 // Create and position our floor 59 _floor = BodyFactory.CreateRectangle( 60 _world, 61 ConvertUnits.ToSimUnits(480), 62 ConvertUnits.ToSimUnits(50), 63 10f); 64 _floor.Position = ConvertUnits.ToSimUnits(240, 775); 65 _floor.IsStatic = true; 66 _floor.Restitution = 0.2f; 67 _floor.Friction = 0.2f; 68 } 69 70 protected override void Update(GameTime gameTime) 71 { 72 // Allows the game to exit 73 if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) 74 Exit(); 75 76 // Create a random box every second 77 _timer += (float) gameTime.ElapsedGameTime.TotalSeconds; 78 if (_timer >= 1.0f) 79 { 80 // Reset our timer 81 _timer = 0f; 82 83 // Determine a random size for each box 84 var random = new Random(); 85 var width = random.Next(20, 100); 86 var height = random.Next(20, 100); 87 88 // Create it and store the size in the user data 89 var box = BodyFactory.CreateRectangle( 90 _world, 91 ConvertUnits.ToSimUnits(width), 92 ConvertUnits.ToSimUnits(height), 93 10f, 94 new Point(width, height)); 95 96 box.BodyType = BodyType.Dynamic; 97 box.Restitution = 0.2f; 98 box.Friction = 0.2f; 99 100 // Randomly pick a location along the top to drop it from 101 box.Position = ConvertUnits.ToSimUnits(random.Next(50, 400), 0); 102 } 103 104 // Advance all the elements in the world 105 _world.Step(Math.Min((float) gameTime.ElapsedGameTime.TotalMilliseconds*0.001f, (1f/30f))); 106 107 // Clean up any boxes that have fallen offscreen 108 foreach (var box in from box in _world.BodyList 109 let pos = ConvertUnits.ToDisplayUnits(box.Position) 110 where pos.Y > _graphics.GraphicsDevice.Viewport.Height 111 select box) 112 { 113 _world.RemoveBody(box); 114 } 115 116 base.Update(gameTime); 117 } 118 119 protected override void Draw(GameTime gameTime) 120 { 121 GraphicsDevice.Clear(Color.FromNonPremultiplied(51, 51, 51, 255)); 122 123 _spriteBatch.Begin(); 124 125 var projection = Matrix.CreateOrthographicOffCenter( 126 0f, 127 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Width), 128 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Height), 0f, 0f, 129 1f); 130 _debugView.RenderDebugData(ref projection); 131 132 _spriteBatch.End(); 133 134 base.Draw(gameTime); 135 } 136 } 137 Lines 4: Declare the debug view we’ll use for rendering (more on that later). Lines 8: Declare _world variable of type class World. World is the main object to interact with the Farseer engine. It stores all the joints and bodies, and is responsible for stepping through the simulation. Lines 12-17: Create the graphics device we’ll be rendering on. This is an XNA component and we’re just setting it to be the same size as the phone and toggling it to be full screen (no system tray). Lines 34: We create a SpriteFont here by adding it to the project. It’s called “font” because that’s what the DebugView uses but you can name it whatever you want (and if you’re not using DebugView for your production app you might have several fonts). Lines 37-44: We create the physics environment that Farseer uses to contain all the objects by specifying it here. We’re using Vector2.UnitY*10 to represent the gravity to be used in the environment. In other words, 10 units going in a downward motion. Lines 46-56: We create the DebugViewXNA here. This is copied from the […] from the code you downloaded and provides the ability to render all entities onto the screen. In a production release you’ll be doing the rendering yourself of each object but we cheat a bit for the demo and let the DebugView do it for us. The other thing it can provide is to render out a panel of debugging information while the simulation is going on. This is useful in tracking down objects, figuring out how something works, or just keeping track of what’s in the engine. Lines 49-67: Here we create a rigid body (Farseer only supports rigid bodies) to represent the floor that we’ll drop objects onto. We create it by using one of the Farseer factories and specifying the width and height. The ConvertUnits class is copied from the samples code as-is and lets us toggle between display units (pixels) and simulation units (usually metres). We’re creating a floor that’s 480 pixels wide and 50 pixels high (converting them to SimUnits for the engine to understand). We also position it near the bottom of the screen. Values are in metres and when specifying values they refer to the centre of the body object. Lines 77-78: The game Update method fires 30 times a second, too fast to be creating objects this quickly. So we use a variable to track the elapsed seconds since the last update, accumulate that value, then create a new box to drop when 1 second has passed. Lines 89-94: We create a box the same way we created our floor (coming up with a random width and height for the box). Lines 96-101: We set the box to be Dynamic (rather than Static like the floor object) and position it somewhere along the top of the screen. And now you created the world. Gravity does the rest and the boxes fall to the ground. Here’s the result: Farseer Physics Engine Demo using XNA Lines 105: We must update the world at every frame. We do this with the Step method which takes in the time interval. [more] Lines 108-114: Body objects are added to the world but never automatically removed (because Farseer doesn’t know about the display world, it has no idea if an item is on the screen or not). Here we just loop through all the entities and anything that’s dropped off the screen (below the bottom) gets removed from the World. This keeps our entity count down (the simulation never has more than 30 or 40 objects in the world no matter how long you run it for). Too many entities and the app will grind to a halt. Lines 125-130: Farseer knows nothing about the UI so that’s entirely up to you as to how to draw things. Farseer is just tracking the objects and moving them around using the physics engine and it’s rules. You’ll still use XNA to draw items (using the SpriteBatch.Draw method) so you can load up your usual textures and draw items and pirates and dancing zombies all over the screen. Instead in this demo we’re going to cheat a little. In the sample code for Farseer you can download there’s a project called DebugView XNA. This project contains the DebugViewXNA class which just handles iterating through all the bodies in the world and drawing the shapes. So we call the RenderDebugData method here of that class to draw everything correctly. In the case of this demo, we just want to draw Shapes so take a look at the source code for the DebugViewXNA class as to how it extracts all the vertices for the shapes created (in this case simple boxes) and draws them. You’ll learn a *lot* about how Farseer works just by looking at this class. That’s it, that’s all. Simple huh? Hope you enjoy the code and library. Physics is hard and requires some math skills to really grok. The Farseer Physics Engine makes it pretty easy to get up and running and start building games. In future posts we’ll get more in-depth with things you can do with the engine so this is just the beginning. Enjoy!

    Read the article

  • How to Implement Project Type "Copy", "Move", "Rename", and "Delete"

    - by Geertjan
    You've followed the NetBeans Project Type Tutorial and now you'd like to let the user copy, move, rename, and delete the projects conforming to your project type. When they right-click a project, they should see the relevant menu items and those menu items should provide dialogs for user interaction, followed by event handling code to deal with the current operation. Right now, at the end of the tutorial, the "Copy" and "Delete" menu items are present but disabled, while the "Move" and "Rename" menu items are absent: The NetBeans Project API provides a built-in mechanism out of the box that you can leverage for project-level "Copy", "Move", "Rename", and "Delete" actions. All the functionality is there for you to use, while all that you need to do is a bit of enablement and configuration, which is described below. To get started, read the following from the NetBeans Project API: http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/ActionProvider.html http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/CopyOperationImplementation.html http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/MoveOrRenameOperationImplementation.html http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/DeleteOperationImplementation.html Now, let's do some work. For each of the menu items we're interested in, we need to do the following: Provide enablement and invocation handling in an ActionProvider implementation. Provide appropriate OperationImplementation classes. Add the new classes to the Project Lookup. Make the Actions visible on the Project Node. Run the application and verify the Actions work as you'd like. Here we go: Create an ActionProvider. Here you specify the Actions that should be supported, the conditions under which they should be enabled, and what should happen when they're invoked, using lots of default code that lets you reuse the functionality provided by the NetBeans Project API: class CustomerActionProvider implements ActionProvider { @Override public String[] getSupportedActions() { return new String[]{ ActionProvider.COMMAND_RENAME, ActionProvider.COMMAND_MOVE, ActionProvider.COMMAND_COPY, ActionProvider.COMMAND_DELETE }; } @Override public void invokeAction(String string, Lookup lkp) throws IllegalArgumentException { if (string.equalsIgnoreCase(ActionProvider.COMMAND_RENAME)) { DefaultProjectOperations.performDefaultRenameOperation( CustomerProject.this, ""); } if (string.equalsIgnoreCase(ActionProvider.COMMAND_MOVE)) { DefaultProjectOperations.performDefaultMoveOperation( CustomerProject.this); } if (string.equalsIgnoreCase(ActionProvider.COMMAND_COPY)) { DefaultProjectOperations.performDefaultCopyOperation( CustomerProject.this); } if (string.equalsIgnoreCase(ActionProvider.COMMAND_DELETE)) { DefaultProjectOperations.performDefaultDeleteOperation( CustomerProject.this); } } @Override public boolean isActionEnabled(String command, Lookup lookup) throws IllegalArgumentException { if ((command.equals(ActionProvider.COMMAND_RENAME))) { return true; } else if ((command.equals(ActionProvider.COMMAND_MOVE))) { return true; } else if ((command.equals(ActionProvider.COMMAND_COPY))) { return true; } else if ((command.equals(ActionProvider.COMMAND_DELETE))) { return true; } return false; } } Importantly, to round off this step, add "new CustomerActionProvider()" to the "getLookup" method of the project. If you were to run the application right now, all the Actions we're interested in would be enabled (if they are visible, as described in step 4 below) but when you invoke any of them you'd get an error message because each of the DefaultProjectOperations above looks in the Lookup of the Project for the presence of an implementation of a class for handling the operation. That's what we're going to do in the next step. Provide Implementations of Project Operations. For each of our operations, the NetBeans Project API lets you implement classes to handle the operation. The dialogs for interacting with the project are provided by the NetBeans project system, but what happens with the folders and files during the operation can be influenced via the operations. Below are the simplest possible implementations, i.e., here we assume we want nothing special to happen. Each of the below needs to be in the Lookup of the Project in order for the operation invocation to succeed. private final class CustomerProjectMoveOrRenameOperation implements MoveOrRenameOperationImplementation { @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public List<FileObject> getDataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyRenaming() throws IOException { } @Override public void notifyRenamed(String nueName) throws IOException { } @Override public void notifyMoving() throws IOException { } @Override public void notifyMoved(Project original, File originalPath, String nueName) throws IOException { } } private final class CustomerProjectCopyOperation implements CopyOperationImplementation { @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public List<FileObject> getDataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyCopying() throws IOException { } @Override public void notifyCopied(Project prjct, File file, String string) throws IOException { } } private final class CustomerProjectDeleteOperation implements DeleteOperationImplementation { @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public List<FileObject> getDataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyDeleting() throws IOException { } @Override public void notifyDeleted() throws IOException { } } Also make sure to put the above methods into the Project Lookup. Check the Lookup of the Project. The "getLookup()" method of the project should now include the classes you created above, as shown in bold below: @Override public Lookup getLookup() { if (lkp == null) { lkp = Lookups.fixed(new Object[]{ this, new Info(), new CustomerProjectLogicalView(this), new CustomerCustomizerProvider(this), new CustomerActionProvider(), new CustomerProjectMoveOrRenameOperation(), new CustomerProjectCopyOperation(), new CustomerProjectDeleteOperation(), new ReportsSubprojectProvider(this), }); } return lkp; } Make Actions Visible on the Project Node. The NetBeans Project API gives you a number of CommonProjectActions, including for the actions we're dealing with. Make sure the items in bold below are in the "getActions" method of the project node: @Override public Action[] getActions(boolean arg0) { return new Action[]{ CommonProjectActions.newFileAction(), CommonProjectActions.copyProjectAction(), CommonProjectActions.moveProjectAction(), CommonProjectActions.renameProjectAction(), CommonProjectActions.deleteProjectAction(), CommonProjectActions.customizeProjectAction(), CommonProjectActions.closeProjectAction() }; } Run the Application. When you run the application, you should see this: Let's now try out the various actions: Copy. When you invoke the Copy action, you'll see the dialog below. Provide a new project name and location and then the copy action is performed when the Copy button is clicked below: The message you see above, in red, might not be relevant to your project type. When you right-click the application and choose Branding, you can find the string in the Resource Bundles tab, as shown below: However, note that the message will be shown in red, no matter what the text is, hence you can really only put something like a warning message there. If you have no text at all, it will also look odd.If the project has subprojects, the copy operation will not automatically copy the subprojects. Take a look here and here for similar more complex scenarios. Move. When you invoke the Move action, the dialog below is shown: Rename. The Rename Project dialog below is shown when you invoke the Rename action: I tried it and both the display name and the folder on disk are changed. Delete. When you invoke the Delete action, you'll see this dialog: The checkbox is not checkable, in the default scenario, and when the dialog above is confirmed, the project is simply closed, i.e., the node hierarchy is removed from the application. However, if you truly want to let the user delete the project on disk, pass the Project to the DeleteOperationImplementation and then add the children of the Project you want to delete to the getDataFiles method: private final class CustomerProjectDeleteOperation implements DeleteOperationImplementation { private final CustomerProject project; private CustomerProjectDeleteOperation(CustomerProject project) { this.project = project; } @Override public List<FileObject> getDataFiles() { List<FileObject> files = new ArrayList<FileObject>(); FileObject[] projectChildren = project.getProjectDirectory().getChildren(); for (FileObject fileObject : projectChildren) { addFile(project.getProjectDirectory(), fileObject.getNameExt(), files); } return files; } private void addFile(FileObject projectDirectory, String fileName, List<FileObject> result) { FileObject file = projectDirectory.getFileObject(fileName); if (file != null) { result.add(file); } } @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyDeleting() throws IOException { } @Override public void notifyDeleted() throws IOException { } } Now the user will be able to check the checkbox, causing the method above to be called in the DeleteOperationImplementation: Hope this answers some questions or at least gets the discussion started. Before asking questions about this topic, please take the steps above and only then attempt to apply them to your own scenario. Useful implementations to look at: http://kickjava.com/src/org/netbeans/modules/j2ee/clientproject/AppClientProjectOperations.java.htm https://kenai.com/projects/nbandroid/sources/mercurial/content/project/src/org/netbeans/modules/android/project/AndroidProjectOperations.java

    Read the article

  • Contract Work - Lessons Learned

    - by samerpaul
    I thought I would write a post of a different nature today, but still relevant to the tech world. I do a lot of contract jobs myself and really enjoy it. It's nice to keep jumping from project to project, and not having to go to an office or keep regular hours, etc. I really enjoy it. I have learned a lot in the past few years of doing it (both from experience and from help given to me from others, and the internet) so I thought I'd share some of that knowledge/experience today.So here's my own personal "lesson's learned" that hopefully will help you if you find yourself doing contract work:Should I take the job?Ok, so this is the first step. Assuming you were given sufficient information about what they want, then you should really think about what you're capable of doing and whether or not you should take this job. Personally, my rule is, if I know it's possible, I'll say yes, even if I don't yet know how to do it. That's because the internet is such a great help, it would be rare to run into an issue that you can't figure out with some help. So if your clients are asking for something that you don't yet know how to program, but you know you can do it on the platform then go for it. How else are you going to learn?Use this rule with some limitation, however. If you're really lacking the expertise or foundation in something, then unless you have tons of time to complete the project, then I wouldn't say yes. For example, I haven't personally done any 3d/openGL programming yet so I wouldn't say yes to a project that extensively uses it. OK, so I want the job, but how much do I charge?This part can be tricky. There is no set formula really, but I have some tips for pricing that will hopefully give you a better idea on how to confidently ask your price and have them accept. Here are some personal guidelinesHow much time do you have to complete the project? If it's shorter than average, then charge more. You can even make a subtle note about this (or not so subtle if they still don't get it.) If it seems too short of a time (i.e. near impossible to complete), be sure to say that. It looks bad to promise a time that you can't keep--and it makes it less likely for them to return to you for work.Your Hourly rate: How long have you been working in that language? Do you have existing projects to back you up? Or previous contacts that can vouch for your work? Are there very few people with your particular skill set? All of these things will lend themselves to setting an hourly rate. I'd also try out a quick google search of what your line of work is, to see what the industry standard is at that point in time.I wouldn't price too low, because you want to make your time worth it. You also want them to feel like they're paying for quality work (assuming you can deliver it :) ). Finally, think about your client. If it's a small business, then don't price it too high if you want the job. If it's an enterprise (like a Fortune company), then don't be afraid to price higher. They have the budget for it.Fixed price: If they want a fixed price project, then you need to think about how many hours it will take you to complete it and multiply it by the hourly rate you set for yourself. Then, honestly, I would add 10-20% on top of that. Why? Because nothing ever works exactly how you want it to. There are lots of times that something "trivial" is way harder than it should be, or something that "should work" doesn't for hours and it eats away at your hourly rate. I can't count the number of times I encountered a logical bug that took away an entire's day work because debuggers don't help in those cases. By adding that padding in, it's still OK to have those days where you don't get as much done as you want. And another useful tip: Depending on your client, and the scope, you most likely want to set that you both sign off on a specification sheet before doing any work, and that any changes will result in a re-evaulation of the price. This is to help protect you from being handed a huge new addition to the project half-way in, without any extra payment.Scope of project: Finally, is it a huge project? Is it really small/fast? This affects how much your client will be willing to pay. If it sounds big, they will be willing to pay more for it. If it seems really small, then you won't be able to get away with a large asking price (as easily).Ok, I priced it, now what?So now that you have the price, you want to make sure it feels justified to your client. I never set a price before I can really think about everything. For example, if you're still in your introduction phase, and they want a price, don't give one! Just comment that you will send them a proposal sheet with all the features outlined, and a price for everything. You don't want to shout out a low number and then deliver something that is way higher. You also don't want to shock them with a big number before they feel like they are getting a great product.Make up a proposal document in a word editor. Personally, I leave the price till the very end. Why? Because by the time they reach the end, you've already discussed all the great features you plan to implement, and how it's the best product they'll ever use, etc etc...so your price comes off as a steal! If you hit them up front with a price, they will read through the document with a negative bias. Think about those commercials on TV. They always go on about their product, then at the end, ask "What would you pay for something like this? $100? $50? How about $20!!". This is not by accident.Scenario: I finished the job way earlier than expectedYou have two options then. You can either polish the hell out of the application, and even throw in a few bonus features (assuming they are in-line with the customer's needs) or you can sit and wait on it until you near your deadline. Why don't you want to turn it in too early? Because you should treat that extra time as a surplus. If you said it is going to take you 3 weeks, and it took you only 1, you have a surplus of 2 weeks. I personally don't want to let them know that I can do a 3 week project in 1 week. Why not? Because that may not always be the case! I may later have a 3 week project that takes all 3 weeks, but if I set a precedent of delivering super early, then the pressure is on for that longer project. It also makes it harder to quote longer times if you keep delivering too early.Feel free to deliver early, but again, don't do it too early. They may also wonder why they paid you for 3 weeks of work if you're done in 1. They may further wonder if the product sucks, or what is wrong with it, if it's done so early, etc.I would just polish the application. Everyone loves polish in their applications. The smallest details are what make an application go from "functional" to "fantastic". And since you are still delivering on time, then they are still going to be very happy with you.Scenario: It's taking way too long to finish this, and the deadline is nearing/here!So this is not a fun scenario to be in, but it'll happen. Sometimes the scope of the project gets out of hand. The best policy here is OPENNESS/HONESTY. Tell them that the project is taking longer than expected, and give a reasonable time for when you think you'll have it done. I typically explain it in a way that makes it sound like it isn't something that I did wrong, but it's just something about the nature of the project. This really goes for any scenario, to be honest. Just continue to stay open and communicative about your progress. This doesn't mean that you should email them every five minutes (unless they want you to), but it does mean that maybe every few days or once a week, give them an update on where you're at, and what's next. They'll be happy to know they are paying for progress, and it'll make it easier to ask for an extension when something goes wrong, because they know that you've been working on it all along.Final tips and thoughts:In general, contract work is really fun and rewarding. It's nice to learn new things all the time, as mandated by the project ,and to challenge yourself to do things you may not have done before. The key is to build a great relationship with your clients for future work, and for recommendations. I am always very honest with them and I never promise something I can't deliver. Again, under promise, over deliver!I hope this has proved helpful!Cheers,samerpaul

    Read the article

< Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >