Search Results

Search found 13788 results on 552 pages for 'instance'.

Page 470/552 | < Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >

• On counting pairs of words that differ by one letter

  - by Quintofron

  Let us consider n words, each of length k. Those words consist of letters over an alphabet (whose cardinality is n) with defined order. The task is to derive an O(nk) algorithm to count the number of pairs of words that differ by one position (no matter which one exactly, as long as it's only a single position). For instance, in the following set of words (n = 5, k = 4): abcd, abdd, adcb, adcd, aecd there are 5 such pairs: (abcd, abdd), (abcd, adcd), (abcd, aecd), (adcb, adcd), (adcd, aecd). So far I've managed to find an algorithm that solves a slightly easier problem: counting the number of pairs of words that differ by one GIVEN position (i-th). In order to do this I swap the letter at the ith position with the last letter within each word, perform a Radix sort (ignoring the last position in each word - formerly the ith position), linearly detect words whose letters at the first 1 to k-1 positions are the same, eventually count the number of occurrences of each letter at the last (originally ith) position within each set of duplicates and calculate the desired pairs (the last part is simple). However, the algorithm above doesn't seem to be applicable to the main problem (under the O(nk) constraint) - at least not without some modifications. Any idea how to solve this?

  Read the article

• C++ Virtual Methods for Class-Specific Attributes or External Structure

  - by acanaday

  I have a set of classes which are all derived from a common base class. I want to use these classes polymorphically. The interface defines a set of getter methods whose return values are constant across a given derived class, but vary from one derived class to another. e.g.: enum AVal { A_VAL_ONE, A_VAL_TWO, A_VAL_THREE }; enum BVal { B_VAL_ONE, B_VAL_TWO, B_VAL_THREE }; class Base { //... virtual AVal getAVal() const = 0; virtual BVal getBVal() const = 0; //... }; class One : public Base { //... AVal getAVal() const { return A_VAL_ONE }; BVal getBVal() const { return B_VAL_ONE }; //... }; class Two : public Base { //... AVal getAVal() const { return A_VAL_TWO }; BVal getBVal() const { return B_VAL_TWO }; //... }; etc. Is this a common way of doing things? If performance is an important consideration, would I be better off pulling the attributes out into an external structure, e.g.: struct Vals { AVal a_val; VBal b_val; }; storing a Vals* in each instance, and rewriting Base as follows? class Base { //... public: AVal getAVal() const { return _vals->a_val; }; BVal getBVal() const { return _vals->b_val; }; //... private: Vals* _vals; }; Is the extra dereference essentially the same as the vtable lookup? What is the established idiom for this type of situation? Are both of these solutions dumb? Any insights are greatly appreciated

  Read the article

• What is an appropriate way to separate lifecycle events in the logging system?

  - by Hanno Fietz

  I have an application with many different parts, it runs on OSGi, so there's the bundle lifecycles, there's a number of message processors and plugin components that all can die, can be started and stopped, have their setup changed etc. I want a way to get a good picture of the current system status, what components are up, which have problems, how long they have been running for etc. I think that logging, especially in combination with custom appenders (I'm using log4j), is a good part of the solution and does help ad-hoc analysis as well as live monitoring. Normally, I would classify lifecycle events as INFO level, but what I really want is to have them separate from what else is going on in INFO. I could create my own level, LIFECYCLE. The lifecycle events happen in various different areas and on various levels in the application hierarchy, also they happen in the same areas as other events that I want to separate them from. I could introduce some common lifecycle management and use that to distinguish the events from others. For instance, all components that have a lifecycle could implement a particular interface and I log by its name. Are there good examples of how this is done elsewhere? What are considerations?

  Read the article

• Using Visual Studio 2010 Express to create a surface I can draw to

  - by Joel

  I'm coming from a Java background and trying to port a simple version of Conway's Game of Life that I wrote to C# in order to learn the language. In Java, I drew my output by inheriting from JComponent and overriding paint(). My new canvas class then had an instance of the simulation's backend which it could read/manipulate. I was then able to get the WYSIWYG GUI editor (Matisse, from NetBeans) to allow me to visually place the canvas. In C#, I've gathered that I need to override OnPaint() to draw things, which (as far as I know) requires me to inherit from something (I chose Panel). I can't figure out how to get the Windows forms editor to let me place my custom class. I'm also uncertain about where in the generated code I need to place my class. How can I do this, and is putting all my drawing code into a subclass really how I should be going about this? The lack of easy answers on Google suggests I'm missing something important here. If anyone wants to suggest a method for doing this in WPF as well, I'm curious to hear it. Thanks

  Read the article

• Web Control added in .master control type not found in child page

  - by turtle

  I have a Web Site project, and within it I have a user Web Control defined in an ascx file. The control is added to the Site.Master, and it shows up correctly on the page and everything is fine. I need to override some of the control's fields on one of the pages that derive from Site.Master. // In OnLoad: MyControlName control = (MyControlName) Page.Master.GetBaseMasterPage().FindControl("controlID")); The issue is that MyControlName doesn't register as a valid Type on the child page. If I add a second instance of the control to the child page directly, the above works as needed, but if the control isn't placed directly on the page, and instead is only defined in the master page, the type is undefined. The control is not in a namespace, and is defined within the project, so I don't know why it is having such an issue location the appropriate type. If I put a breakpoint in the OnLoad, the type listed for the control is ASP.my_control_name_ascx, but using that does not work either. Why can't the child class reference the correct type? Can I fix this? Thanks!

  Read the article

• Permutations distinct under given symmetry (Mathematica 8 group theory)

  - by Yaroslav Bulatov

  Given a list of integers like {2,1,1,0} I'd like to list all permutations of that list that are not equivalent under given group. For instance, using symmetry of the square, the result would be {{2, 1, 1, 0}, {2, 1, 0, 1}}. Approach below (Mathematica 8) generates all permutations, then weeds out the equivalent ones. I can't use it because I can't afford to generate all permutations, is there a more efficient way? Update: actually, the bottleneck is in DeleteCases. The following list {2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1, 1, 0, 0, 0} has about a million permutations and takes 0.1 seconds to compute. Apparently there are supposed to be 1292 orderings after removing symmetries, but my approach doesn't finish in 10 minutes removeEquivalent[{}] := {}; removeEquivalent[list_] := ( Sow[First[list]]; equivalents = Permute[First[list], #] & /@ GroupElements[group]; DeleteCases[list, Alternatives @@ equivalents] ); nonequivalentPermutations[list_] := ( reaped = Reap@FixedPoint[removeEquivalent, Permutations@list]; reaped[[2, 1]] ); group = DihedralGroup[4]; nonequivalentPermutations[{2, 1, 1, 0}]

  Read the article

• How to lazy load a data structure (python)

  - by Anton Geraschenko

  I have some way of building a data structure (out of some file contents, say): def loadfile(FILE): return # some data structure created from the contents of FILE So I can do things like puppies = loadfile("puppies.csv") # wait for loadfile to work kitties = loadfile("kitties.csv") # wait some more print len(puppies) print puppies[32] In the above example, I wasted a bunch of time actually reading kitties.csv and creating a data structure that I never used. I'd like to avoid that waste without constantly checking if not kitties whenever I want to do something. I'd like to be able to do puppies = lazyload("puppies.csv") # instant kitties = lazyload("kitties.csv") # instant print len(puppies) # wait for loadfile print puppies[32] So if I don't ever try to do anything with kitties, loadfile("kitties.csv") never gets called. Is there some standard way to do this? After playing around with it for a bit, I produced the following solution, which appears to work correctly and is quite brief. Are there some alternatives? Are there drawbacks to using this approach that I should keep in mind? class lazyload: def __init__(self,FILE): self.FILE = FILE self.F = None def __getattr__(self,name): if not self.F: print "loading %s" % self.FILE self.F = loadfile(self.FILE) return object.__getattribute__(self.F, name) What might be even better is if something like this worked: class lazyload: def __init__(self,FILE): self.FILE = FILE def __getattr__(self,name): self = loadfile(self.FILE) # this never gets called again # since self is no longer a # lazyload instance return object.__getattribute__(self, name) But this doesn't work because self is local. It actually ends up calling loadfile every time you do anything.

  Read the article

• jsf and eclipse setup. Lib in Explorer is different than lib in tomcat. How come?

  - by user384706

  Hi, I am starter in JSF2.0, and I have a question related to Eclipse (I am using Helios). 1)I create a Dynamic Project 2)I add JSF project facet. 3)I choose JSF user library (I have created it using MyFaces) All ok so far. I notice though that in the Project Explorer in WebContent/WEB-INF/lib the lib directory is empty instead of having MyFaces jars. The application works fine though. I looked into this and the jars are actually being placed in the corresponding lib directory of the app deployed under wtpwebapps of the Tomcat instance of eclipse in the .pluggins directory. Ok, it works but IMHO it is incorrect to have the Project Explorer inconsistent with the directories actually deployed. I.e. lib is shown empty in Project Explorer but with jars under wtpwebapps. Am I wrong to dislike this inconsistency? Is this how it should work or am I doing something wrong in the way I am setting my project? Thanks!

  Read the article

• How to reduce a data frame keeping the order for other columns

  - by betabandido

  I am trying to reduce a data frame using the max function on a given column. I would like to preserve other columns but keeping the values from the same rows where each maximum value was selected. An example will make this explanation easier. Let us assume we have the following data frame: dframe <- data.frame(list(BENCH=sort(rep(letters[1:4], 4)), CFG=rep(1:4, 4), VALUE=runif(4 * 4) )) This gives me: BENCH CFG VALUE 1 a 1 0.98828096 2 a 2 0.19630597 3 a 3 0.83539540 4 a 4 0.90988296 5 b 1 0.01191147 6 b 2 0.35164194 7 b 3 0.55094787 8 b 4 0.20744004 9 c 1 0.49864470 10 c 2 0.77845408 11 c 3 0.25278871 12 c 4 0.23440847 13 d 1 0.29795494 14 d 2 0.91766057 15 d 3 0.68044728 16 d 4 0.18448748 Now, I want to reduce the data in order to select the maximum VALUE for each different BENCH: aggregate(VALUE ~ BENCH, dframe, FUN=max) This gives me the expected result: BENCH VALUE 1 a 0.9882810 2 b 0.5509479 3 c 0.7784541 4 d 0.9176606 Next, I tried to preserve other columns: aggregate(cbind(VALUE, CFG) ~ BENCH, dframe, FUN=max) This reduction returns: BENCH VALUE CFG 1 a 0.9882810 4 2 b 0.5509479 4 3 c 0.7784541 4 4 d 0.9176606 4 Both VALUE and CFG are reduced using max function. But this is not what I want. For instance, in this example I would like to obtain: BENCH VALUE CFG 1 a 0.9882810 1 2 b 0.5509479 3 3 c 0.7784541 2 4 d 0.9176606 2 where CFG is not reduced, but it just keeps the value associated to the maximum VALUE for each different BENCH. How could I change my reduction in order to obtain the last result shown?

  Read the article

• Cannot bind to IPv6 address

  - by ereOn

  I am facing a strange problem on my Ubuntu Karmic system. When I call getaddrinfo() with AI_PASSIVE and AF_UNSPEC, for an empty host and the UDP 12000 port to get a bindable address, I only get back one IPv4 result (0.0.0.0:12000 for instance). If I change my call and specify AF_INET6 instead of AF_UNSPEC, then getaddrinfo() returns "Name or service not known". Shouldn't I get [::]:12000 as a result ? The same thing happens if I set the host to ::1. When I call getaddrinfo() without AI_PASSIVE (to get a "connectable" address) for the host "localhost" and the UDP 12000 port, I first get [::1]:12000 then 127.0.0.1:12000. So apparently, my system is IPv6 ready (I can ping to both IPv4 and IPv6 addresses, as well as DNS resolution). But how is it that I can't get an IPv6 address to bind to with getaddrinfo() ? Do you guys have any idea about what could be wrong ? My OS is Ubuntu Karmic, fresh install without any networking tweaking. Thank you.

  Read the article

• How would I associate a "Note" class to 4+ classes without creating lookup table for each associatio

  - by Gthompson83

  Im creating a project tasklist application. I have project, section, task, issue classes, and would like to use one class to be able to add simple notes to any object instance of those classes. The task, issue tables both use a standard identity field as a primary key. The section table has a two field primary key. The project table has a single int primary key defined by the user. Is there a way to associate the note class with each of these without using a seperate lookup table for each class? I'm not so sure my original idea is a decent way to implement this. I considered the following (each variable mapping to a field n the notes table. Private _NoteId As Integer Private _ProjectId As Integer Private _SectionId As Integer Private _SectionId2 As Integer Private _TaskId As Integer Private _IssueId As Integer Private _Note As String Private _UserId As Guid Then I would be able to write seperate methods (getProjectNotes, getTaskNotes) to get notes attached to each class. I started writing this a few weeks ago but got pulled away before i could finish. When revisiting this code today my first thought "this is retarded". Thoughts on drawbacks to this design?

  Read the article

• How to re-enable the idle timer in ios once it has been disabled (to allow the display to sleep again)?

  - by lindon fox

  I have figured out how to stop an iOS device from going to sleep (see below), but I am having troubles undoing that setting. According to the Apple Documentation, it should just be changing the value of the idleTimerDisabled property. But when I test this, it does not work. This is how I am initially stopping the device from going to sleep: //need to switch off and on for it to work initially [UIApplication sharedApplication].idleTimerDisabled = NO; [UIApplication sharedApplication].idleTimerDisabled = YES; I would have thought that the following would do the trick: [UIApplication sharedApplication].idleTimerDisabled = NO; From the Apple Documentation: The default value of this property is NO. When most applications have no touches as user input for a short period, the system puts the device into a "sleep” state where the screen dims. This is done for the purposes of conserving power. However, applications that don't have user input except for the accelerometer—games, for instance—can, by setting this property to YES, disable the “idle timer” to avert system sleep. Important: You should set this property only if necessary and should be sure to reset it to NO when the need no longer exists. Most applications should let the system turn off the screen when the idle timer elapses. This includes audio applications. With appropriate use of Audio Session Services, playback and recording proceed uninterrupted when the screen turns off. The only applications that should disable the idle timer are mapping applications, games, or similar programs with sporadic user interaction. Has anyone come across this problem? I am testing on iOS6 and iOS5. Thanks in advance.

  Read the article

• How come JFrame window size in Java does not produce the size of window specified?

  - by typoknig

  Hi all, I am just messing around trying to make a game right now, but I have had this problem before too. When I specify a specific window size (1024 x 768 for instance) the window produced is just a little larger than what I specified. Very annoying. Is there a reason for this? How do I correct it so the window created is actually the size I want instead of being just a little bit bigger? Up till now I have always just gone back and manually adjusted the size a few pixels at a time until I got the result I wanted, but that is getting old. If there was even a formula I could use that would tell me how many pixels I needed to add/subtract from my my variable that would be excellent! P.S. I don't know if my OS could be a factor in this, but I am using W7X64. private int windowWidth = 1024; private int windowHeight = 768; public SomeWindow() { this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); this.setSize(windowWidth, windowHeight); this.setResizable(false); this.setLocation(0,0); this.setVisible(true); }

  Read the article

• multiple models in Rails with a shared interface

  - by dfondente

  I'm not sure of the best structure for a particular situation in Rails. We have several types of workshops. The administration of the workshops is the same regardless of workshop type, so the data for the workshops is in a single model. We collect feedback from participants about the workshops, and the questionnaire is different for each type of workshop. I want to access the feedback about the workshop from the workshop model, but the class of the associated model will depend on the type of workshop. If I was doing this in something other than Rails, I would set up an abstract class for WorkshopFeedback, and then have subclasses for each type of workshop: WorkshopFeedbackOne, WorkshopFeedbackTwo, WorkshopFeedbackThree. I'm unsure how to best handle this with Rails. I currently have: class Workshop < ActiveRecord::Base has_many :workshop_feedbacks end class Feedback < ActiveRecord::Base belongs_to :workshop has_many :feedback_ones has_many :feedback_twos has_many :feedback_threes end class FeedbackOne < ActiveRecord::Base belongs_to :feedback end class FeedbackTwo < ActiveRecord::Base belongs_to :feedback end class FeedbackThree < ActiveRecord::Base belongs_to :feedback end This doesn't seem like to the cleanest way to access the feedback from the workshop model, as accessing the correct feedback will require logic investigating the Workshop type and then choosing, for instance, @workshop.feedback.feedback_one. Is there a better way to handle this situation? Would it be better to use a polymorphic association for feedback? Or maybe using a Module or Mixin for the shared Feedback interface? Note: I am avoiding using Single Table Inheritance here because the FeedbackOne, FeedbackTwo, FeedbackThree models do not share much common data, so I would end up with a large sparsely populated table with STI.

  Read the article

• Will TFS 2010 support non-contiguous merging?

  - by steve_d

  I know that merging non-contiguous changesets at once may not be a good idea. However there is at least one situation in which merging non-contiguous changesets is (probably) not going to break anything: when there are no intervening changes on the affected individual files. (At least, it wouldn't break any worse than would a series of cherry-picked merges, checked in each time; and at least this way you would discover breakage before checking in). For instance, let's say you have a Main and a Development branch. They start out identical (e.g. after a release). They have two files, foo.cs and bar.cs. Alice makes a change in Development\foo.cs and checks it in as changeset #1001. Bob makes a change in Development\bar.cs and checks it in as #1002. Alice makes another change to Development\foo.cs and checks it in as #1003. Now we could in theory merge both changes #1001 and #1003 from dev-to main in a single operation. If we try to merge at the branch level, dev-to-main, we will have to do it as two operations. In this simple, contrived example it's simple enough to merge the one file - but in the real world where there would be many files involved, it's not so simple. Non-contiguous merging is one of the reasons given for why "merge by workitem" is not implemented in TFS.

  Read the article

• Javascript help needed - which variable is return empty??

  - by mathew

  Hi I would like to know how do I add an error check to below mentioned code...I mean how do I check if this code return empty or not?? if this returns empty then I would give a message "Not Found".. How do I do That?? google.load('search', '1'); var blogSearch; function searchComplete() { // Check that we got results document.getElementById('content').innerHTML = ''; if (blogSearch.results && blogSearch.results.length > 0) { for (var i = 0; i < blogSearch.results.length; i++) { // Create HTML elements for search results var p = document.createElement('p'); var a = document.createElement('a'); a.href = blogSearch.results[i].postUrl; a.innerHTML = blogSearch.results[i].title; // Append search results to the HTML nodes p.appendChild(a); document.body.appendChild(p); } } } function onLoad() { // Create a BlogSearch instance. blogSearch = new google.search.BlogSearch(); // Set searchComplete as the callback function when a search is complete. The // blogSearch object will have results in it. blogSearch.setSearchCompleteCallback(this, searchComplete, null); // Set a site restriction blogSearch.setSiteRestriction('blogspot.com'); // Execute search query blogSearch.execute('1974 Chevrolet Caprice'); // Include the required Google branding google.search.Search.getBranding('branding'); } // Set a callback to call your code when the page loads google.setOnLoadCallback(onLoad);

  Read the article

• How to draw mutiple rectangles using c#

  - by Nivas

  I have drawn and saved the Rectangle on the image i loaded in the picture box. How i like to draw multiple rectangles for that i tried array in the rectangle but it gives error ("Object reference not set to an instance of an object." (Null reference Exception was unhandled). enter code here private void pictureBox1_MouseDown(object sender, MouseEventArgs e) { if (mybitmap == null) { mybitmap = new Bitmap(sz.Width, sz.Height); } rect = new Rectangle(e.X, e.Y, 0, 0); this.Invalidate(); } private void pictureBox1_MouseMove(object sender, MouseEventArgs e) { if (stayToolStripMenuItem.Checked == true) { switch (e.Button) { case MouseButtons.Left: { rect = new Rectangle(rect.Left, rect.Top, e.X - rect.Left, e.Y - rect.Top); pictureBox1.Invalidate(); break; } } } } private void pictureBox1_Paint(object sender, PaintEventArgs e) { if (stayToolStripMenuItem.Checked == true) { button1.Visible = true; button2.Visible = true; if (mybitmap == null) { return; } using (g = Graphics.FromImage(mybitmap)) { using (Pen pen = new Pen(Color.Red, 2)) { //g.Clear(Color.Transparent); e.Graphics.DrawRectangle(pen, rect); label1.Top = rect.Top; label1.Left = rect.Left; label1.Width = rect.Width; label1.Height = rect.Height; if (label1.TextAlign == ContentAlignment.TopLeft) { e.Graphics.DrawString(label1.Text, label1.Font, new SolidBrush(label1.ForeColor), rect); g.DrawString(label1.Text, label1.Font, new SolidBrush(label1.ForeColor), rect); g.DrawRectangle(pen, rect); } } } } } How can i do this.....

  Read the article

• rc.local on ubuntu on ec2 will not work

  - by Tampa

  Below are the contents of my rc.local file. When I run sudo /etc/rc.local it works fine. When I boot up and instance. I expect monit to be installed but it is not. I am at a total loss. I usually use rc.local but this is rather confunsing. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. apt-get -y install monit /etc/init.d/monit stop cd /home/ubuntu/workspace/rtbopsConfig/ git fetch git checkout origin/master rtb_ec2_boot/ec2_boot.py git checkout origin/master config/ cp /home/ubuntu/workspace/rtbopsConfig/config/monit/redis/monitrc /etc/monit/ /usr/bin/python /home/ubuntu/workspace/rtbopsConfig/rtb_ec2_boot/ec2_boot.py >> /home/ubuntu/workspace/ec2_boot.txt 2>&1 /etc/init.d/monit start chkconfig monit on exit 0

  Read the article

• Is Safari on iOS 6 caching $.ajax results?

  - by user1684978

  Since the upgrade to iOS 6, we are seeing Safari's web view take the liberty of caching $.ajax calls. This is in the context of a PhoneGap application so it is using the Safari WebView. Our $.ajax calls are POST methods and we have cache set to false {cache:false}, but still this is happening. We tried manually adding a timestamp to the headers but it did not help. We did more research and found that Safari is only returning cached results for web services that have a function signature that is static and does not change from call to call. For instance, imagine a function called something like: getNewRecordID(intRecordType) This function receives the same input parameters over and over again, but the data it returns should be different every time. Must be in Apple's haste to make iOS 6 zip along impressively they got too happy with the cache settings. Has anyone else seen this behavior on iOS 6? If so, what exactly is causing it? The workaround that we found was to modify the function signature to be something like this: getNewRecordID(intRecordType, strTimestamp) and then always pass in a timestamp parameter as well, and just discard that value on the server side. This works around the issue. I hope this helps some other poor soul who spends 15 hours on this issue like I did!

  Read the article

• NUll exception in filling a querystring by mocing framework

  - by user564101

  There is a simple controller that a querystring is read in constructor of it. public class ProductController : Controller { parivate string productName; public ProductController() { productName = Request.QueryString["productname"]; } public ActionResult Index() { ViewData["Message"] = productName; return View(); } } Also I have a function in unit test that create an instance of this Controller and I fill the querystring by a Mock object like below. [TestClass] public class ProductControllerTest { [TestMethod] public void test() { // Arrange var querystring = new System.Collections.Specialized.NameValueCollection { { "productname", "sampleproduct"} }; var mock = new Mock<ControllerContext>(); mock.SetupGet(p => p.HttpContext.Request.QueryString).Returns(querystring); var controller = new ProductController(); controller.ControllerContext = mock.Object; // Act var result = controller.Index() as ViewResult; // Assert Assert.AreEqual("Index", result.ViewName); } } Unfortunately Request.QueryString["productname"] is null in constructor of ProductController when I run test unit. Is ther any way to fill a querystrin by a mocking and get it in constructor of a control?

  Read the article

• MySQL query paralyzes site

  - by nute

  Once in a while, at random intervals, our website gets completely paralyzed. Looking at SHOW FULL PROCESSLIST;, I've noticed that when this happens, there is a specific query that is "Copying to tmp table" for a loooong time (sometimes 350 seconds), and almost all the other queries are "Locked". The part I don't understand is that 90% of the time, this query runs fine. I see it going through in the process list and it finishes pretty quickly most of the time. This query is being called by an ajax call on our homepage to display product recommendations based your browsing history (a la amazon). Just sometimes, randomly (but too often), it gets stuck at "copying to tmp table". Here is a caught instance of the query that was up 109 seconds when I looked: SELECT DISTINCT product_product.id, product_product.name, product_product.retailprice, product_product.imageurl, product_product.thumbnailurl, product_product.msrp FROM product_product, product_xref, product_viewhistory WHERE ( (product_viewhistory.productId = product_xref.product_id_1 AND product_xref.product_id_2 = product_product.id) OR (product_viewhistory.productId = product_xref.product_id_2 AND product_xref.product_id_1 = product_product.id) ) AND product_product.outofstock='N' AND product_viewhistory.cookieId = '188af1efad392c2adf82' AND product_viewhistory.productId IN (24976, 25873, 26067, 26073, 44949, 16209, 70528, 69784, 75171, 75172) ORDER BY product_xref.hits DESC LIMIT 10 Of course the "cookieId" and the list of "productId" changes dynamically depending on the request. I use php with PDO.

  Read the article

• Netbeans, JPA Entity Beans in seperate projects. Unknown entity bean class

  - by Stu

  I am working in Netbeans and have my entity beans and web services in separate projects. I include the entity beans in the web services project however the ApplicaitonConfig.java file keeps getting over written and removing the entries I make for the entity beans in the associated jar file. My question is: is it required to have both the EntityBeans and the WebServices share the same project/jar file? If not what is the appropriate way to include the entity beans which are in the jar file? <?xml version="1.0" encoding="UTF-8"?> <persistence version="2.1" xmlns="http://xmlns.jcp.org/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/persistence http://xmlns.jcp.org/xml/ns/persistence/persistence_2_1.xsd"> <persistence-unit name="jdbc/emrPool" transaction-type="JTA"> <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider> <jta-data-source>jdbc/emrPool</jta-data-source> <exclude-unlisted-classes>false</exclude-unlisted-classes> <properties> <property name="eclipselink.ddl-generation" value="none"/> <property name="eclipselink.cache.shared.default" value="false"/> </properties> </persistence-unit> </persistence> Based on Melc's input i verified that that the transaction type is set to JTA and the jta-data-source is set to the value for the Glassfish JDBC Resource. Unfortunately the problem still persists. I have opened the WAR file and validated that the EntityBean.jar file is the latest version and is located in the WEB-INF/lib directory of the War file. I think it is tied to the fact that the entities are not being "registered" with the entity manager. However i do not know why they are not being registered.

  Read the article

• Error compiling basic java code

  - by Michael Younani

  New to java. Practicing coding by following a book. Heres my code: class Motorcycle { //Three instance variables - make and color are strings. while a boolean refers to TRUE OR FLASE(in this case off or on) String make; String color; boolean engineState; void startEngine() { if (engineState == true) System.out.print("The engine is already on."); else { engineState = true; System.out.print("The engine is now on."); } void showAtts() { System.out.print("This motorcycle is a " + color + " " + make); if (engineState ==true) System.out.print("The engine is on."); else System.out.print("The engine is off."); } } } When I compile I get 2 errors: 1) illegal start of expression 2) ; expected I can't pin point the problem. If anyone can direct me or hint me please do.

  Read the article

• Session scoped bean as class attribute of Spring MVC Controller

  - by Sotirios Delimanolis

  I have a User class: @Component @Scope("session") public class User { private String username; } And a Controller class: @Controller public class UserManager { @Autowired private User user; @ModelAttribute("user") private User createUser() { return user; } @RequestMapping(value = "/user") public String getUser(HttpServletRequest request) { Random r = new Random(); user.setUsername(new Double(r.nextDouble()).toString()); request.getSession().invalidate(); request.getSession(true); return "user"; } } I invalidate the session so that the next time i got to /users, I get another user. I'm expecting a different user because of user's session scope, but I get the same user. I checked in debug mode and it is the same object id in memory. My bean is declared as so: <bean id="user" class="org.synchronica.domain.User"> <aop:scoped-proxy/> </bean> I'm new to spring, so I'm obviously doing something wrong. I want one instance of User for each session. How?

  Read the article

• Generics in a bidirectional association

  - by Verhoevenv

  Let's say I have two classes A and B, with B a subtype of A. This is only part of a richer type hierarchy, obviously, but I don't think that's relevant. Assume A is the root of the hierarchy. There is a collection class C that keeps track of a list of A's. However, I want to make C generic, so that it is possible to make an instance that only keeps B's and won't accept A's. class A(val c: C[A]) { c.addEntry(this) } class B(c: C[A]) extends A(c) class C[T <: A]{ val entries = new ArrayBuffer[T]() def addEntry(e: T) { entries += e } } object Generic { def main(args : Array[String]) { val c = new C[B]() new B(c) } } The code above obviously give the error 'type mismatch: found C[B], required C[A]' on the new B(c) line. I'm not sure how this can be fixed. It's not possible to make C covariant in T (like C[+T <: A]) because the ArrayBuffer is non-variantly typed in T. It's not possible to make the constructor of B require a C[B] because C can't be covariant. Am I barking up the wrong tree here? I'm a complete Scala newbie, so any ideas and tips might be helpful. Thank you! EDIT: Basically, what I'd like to have is that the compiler accepts both val c = new C[B]() new B(c) and val c = new C[A]() new B(c) but would reject val c = new C[B]() new A(c) It's probably possible to relax the typing of the ArrayBuffer in C to be A instead of T, and thus in the addEntry method as well, if that helps.

  Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >