Search Results

Search found 14311 results on 573 pages for 'stan note'.

Page 475/573 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• Rotating WebLogic Server logs to avoid large files using WLST.

  - by adejuanc

  By default, when WebLogic Server instances are started in development mode, the server automatically renames (rotates) its local server log file as SERVER_NAME.log.n.  For the remainder of the server session, log messages accumulate in SERVER_NAME.log until the file grows to a size of 500 kilobytes.Each time the server log file reaches this size, the server renames the log file and creates a new SERVER_NAME.log to store new messages. By default, the rotated log files are numbered in order of creation filenamennnnn, where filename is the name configured for the log file. You can configure a server instance to include a time and date stamp in the file name of rotated log files; for example, server-name-%yyyy%-%mm%-%dd%-%hh%-%mm%.log.By default, when server instances are started in production mode, the server rotates its server log file whenever the file grows to 5000 kilobytes in size. It does not rotate the local server log file when the server is started. For more information about changing the mode in which a server starts, see Change to production mode in the Administration Console Online Help.You can change these default settings for log file rotation. For example, you can change the file size at which the server rotates the log file or you can configure a server to rotate log files based on a time interval. You can also specify the maximum number of rotated files that can accumulate. After the number of log files reaches this number, subsequent file rotations delete the oldest log file and create a new log file with the latest suffix.  Note: WebLogic Server sets a threshold size limit of 500 MB before it forces a hard rotation to prevent excessive log file growth. To Rotate via WLST : #invoke WLSTC:\>java weblogic.WLST#connect WLST to an Administration Serverawls:/offline> connect('username','password')#navigate to the ServerRuntime MBean hierarchywls:/mydomain/serverConfig> serverRuntime()wls:/mydomain/serverRuntime>ls()#navigate to the server LogRuntimeMBeanwls:/mydomain/serverRuntime> cd('LogRuntime/myserver')wls:/mydomain/serverRuntime/LogRuntime/myserver> ls()-r-- Name myserver-r-- Type LogRuntime-r-x forceLogRotation java.lang.Void :#force the immediate rotation of the server log filewls:/mydomain/serverRuntime/LogRuntime/myserver> cmo.forceLogRotation()wls:/mydomain/serverRuntime/LogRuntime/myserver> The server immediately rotates the file and prints the following message: <Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170017> <The log file C:\diablodomain\servers\myserver\logs\myserver.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.><Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170018> <The log file has been rotated to C:\diablodomain\servers\myserver\logs\myserver.log00001. Log messages will continue to be logged in C:\diablodomain\servers\myserver\logs\myserver.log.> To specify the Location of the archived Log Files The following command specifies the directory location for the archived log files using the -Dweblogic.log.LogFileRotationDir Java startup option: java -Dweblogic.log.LogFileRotationDir=c:\foo-Dweblogic.management.username=installadministrator-Dweblogic.management.password=installadministrator weblogic.Server For more information read the following documentation ; Using the WebLogic Scripting Tool http://download.oracle.com/docs/cd/E13222_01/wls/docs103/config_scripting/using_WLST.html Configuring WebLogic Logging Services http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html

  Read the article

• Move over DFS and Robocopy, here is SyncToy!

  - by andywe

  Ever since Windows 2000, I have always had the need to replicate data to multiple endpoints with the same content. Until DFS was introduced, the method of thinking was to either manually copy the data location by location, or to batch script it with xcopy and schedule a task. Even though this worked (and still does today), it was cumbersome, and intensive on the network, especially when dealing with larger amounts of data. Then along came robocopy, as an internal tool written by an enterprising programmer at Microsoft. We used it quite a bit, especially when we could not use DFS in the early days. It was received so well, it made it into the public realm. At least now we could have the ability to determine what files had changed and only replicate those. Well, over time there has been evolution of this ideal. DFS is obviously the Windows enterprise class service to do this, along with BrancheCache..however you don’t always need or want the power of DFS, especially when it comes to small datacenter installations, or remote offices. I have specific data sets that are on closed or restricted networks, that either have a security need for this, or are in remote countries where bandwidth is a premium. FOr this, I use the latest evolution for one off replication names Synctoy. Synctoy is from Microsoft, seemingly released in 2009, that wraps a nice GUI around setting up a paired set of folders (remember the mobile briefcase from Windows 98?), and allowing you the choice of synchronization methods. 1 way, or 2 way. Simply create a paired set of folders on the source and destination, choose your options for content, exclude any file types you don’t want to replicate, and click run. Scheduling is even easier. MS has included a wrapper for doing just this so all you enter in your task schedule in the SynToyCMD.exe, a –R as an argument, and the time schedule. No more complicated command lines or scripts.   I find this especially useful when I use MS backup to back up a system volume, but only want subsets of backup information of a data share and ONLY when that dataset has changed. Not relying on full backups and incremental. An example of this is my application installation master share. I back this up with SyncToy because I do not need multiple backup copies..one copy elsewhere suffices to back it up. At home, very useful for your pictures, videos, music, ect..the backup is online and ready to access, not waiting for you to restore a backup file, and no need to institute a domain simply to have DFS.'   Do note there is a risk..if you accidently delete a file and do not catch this before the next sync, then depending on your SyncToy settings, you can indeed lose that file as the destination updates..so due diligence applies. I make it a rule to sync manly one way…I use my master share for making changes, and allow the schedule to follow suit. Any real important file I lock down as read only through file permissions so it cannot be deleted unless I intervene.   Check out the tool and have some fun! http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=15155

  Read the article

• Moving from Silverlight 4 Beta to RC - Part 1

  The other day I had finished up my Task-It Webinar, written a few blog posts, and knew the time had come to move from my Silverlight 4 Beta environment up to the latest RC (release candidate) bits that were released last Monday. What disappointed me when I went to the Silverlight 4 Information Page is that it told me what to install, but not what to uninstall first. Uninstalling I'm not entirely sure if I had to uninstall anything, or if installing the new stuff would just work, but in poking around the web I found posts stating that you must uninstall the following items first. Unfortunately I'm going by memory here and have not been able to find my way back to the magic page I found in the myriad of posts that I went through: Microsoft VisualStudio Beta 2 Microsoft .NET Framework 4 Extended (apparently this must be done *before* the next one) Microsoft .NET Framework Client Profile Microsoft Silverlight 4 Tools for Visual Studio 2010 WCF RIA Services Preview for Visual Studio 2010 While I was at it, I removed a bunch of other stuff, like Blend 3, Blend 4, the SDK's associated with them, and a bunch other stuff that was old. Of course, I didn't really want/need to keep any Silverlight 3 stuff around as I am developing Task-It in Silverlight 4. If I need a Silverlight 3 environment at some point I'll set it up in a virtual environment. NOTE: One thing that I did not uninstall is the Microsoft Silverlight 4 Toolkit November 2009. The reason is that they have not released the March version yet, so if you uninstall this, youll end up having to reinstall it. Installing OK, now that I had all of that old stuff off my machine, now it was time to get the new stuff. For this part I liked Tim Heuer's post, A Guide to What has Changed in Silverlight 4 RC better than the Silverlight 4 Information Page. VisualStudio 2010 RC - I installed Ultimate, but you may not need that version. No harm, it's free for now anyway. I downloaded the .exe and the 3 .rar files, then ran the .exe. I then extracted the contents of the ISO (using WinZip) to a new directory, and now had Setup.exe, a bunch of .cab files and some other assorted stuff. I simply ran Setup.exe and chose custom install (only because I wanted to uncheck Visual C++...I don't really have a need for that) Silverlight 4 Tools for Visual Studio 2010 - As mentioned in Tim's blog post, this installs this installs Silverlight developer runtime, SDK, tools, and this installs Silverlight developer runtime, SDK, tools, and WCF RIA Services. WCF RIA Services Toolkit March 2010 - I'm not sure if/when I'll need any of this stuff, but no harm in installing it anyway. Expression Blend 4 beta - Only if you plan to use Blend, which I do. Windows Phone Developer Tools - Only if you are interested in playing with Windows Phone 7 development. Wrap Up Hopefully I got those steps right. If anyone finds anything I've missed, please just add a comment to this post and I'll update it accordingly.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Feynman's inbox

  - by user12607414

  Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

  Read the article

• Server-Sent Events using GlassFish (TOTD #179)

  - by arungupta

  Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

  Read the article

• Strings in .NET are Enumerable

  - by Scott Dorman

  It seems like there is always some confusion concerning strings in .NET. This is both from developers who are new to the Framework and those that have been working with it for quite some time. Strings in the .NET Framework are represented by the System.String class, which encapsulates the data manipulation, sorting, and searching methods you most commonly perform on string data. In the .NET Framework, you can use System.String (which is the actual type name or the language alias (for C#, string). They are equivalent so use whichever naming convention you prefer but be consistent. Common usage (and my preference) is to use the language alias (string) when referring to the data type and String (the actual type name) when accessing the static members of the class. Many mainstream programming languages (like C and C++) treat strings as a null terminated array of characters. The .NET Framework, however, treats strings as an immutable sequence of Unicode characters which cannot be modified after it has been created. Because strings are immutable, all operations which modify the string contents are actually creating new string instances and returning those. They never modify the original string data. There is one important word in the preceding paragraph which many people tend to miss: sequence. In .NET, strings are treated as a sequence…in fact, they are treated as an enumerable sequence. This can be verified if you look at the class declaration for System.String, as seen below: // Summary:// Represents text as a series of Unicode characters.public sealed class String : IEnumerable, IComparable, IComparable<string>, IEquatable<string> The first interface that String implements is IEnumerable, which has the following definition: // Summary:// Exposes the enumerator, which supports a simple iteration over a non-generic// collection.public interface IEnumerable{ // Summary: // Returns an enumerator that iterates through a collection. // // Returns: // An System.Collections.IEnumerator object that can be used to iterate through // the collection. IEnumerator GetEnumerator();} As a side note, System.Array also implements IEnumerable. Why is that important to know? Simply put, it means that any operation you can perform on an array can also be performed on a string. This allows you to write code such as the following: string s = "The quick brown fox";foreach (var c in s){ System.Diagnostics.Debug.WriteLine(c);}for (int i = 0; i < s.Length; i++){ System.Diagnostics.Debug.WriteLine(s[i]);} If you executed those lines of code in a running application, you would see the following output in the Visual Studio Output window: In the case of a string, these enumerable or array operations return a char (System.Char) rather than a string. That might lead you to believe that you can get around the string immutability restriction by simply treating strings as an array and assigning a new character to a specific index location inside the string, like this: string s = "The quick brown fox";s[2] = 'a';   However, if you were to write such code, the compiler will promptly tell you that you can’t do it: This preserves the notion that strings are immutable and cannot be changed once they are created. (Incidentally, there is no built in way to replace a single character like this. It can be done but it would require converting the string to a character array, changing the appropriate indexed location, and then creating a new string.)

  Read the article

• A Reusable Builder Class for .NET testing

  - by Liam McLennan

  When writing tests, other than end-to-end integration tests, we often need to construct test data objects. Of course this can be done using the class’s constructor and manually configuring the object, but to get many objects into a valid state soon becomes a large percentage of the testing effort. After many years of painstakingly creating builders for each of my domain objects I have finally become lazy enough to bother to write a generic, reusable builder class for .NET. To use it you instantiate a instance of the builder and configuring it with a builder method for each class you wish it to be able to build. The builder method should require no parameters and should return a new instance of the type in a default, valid state. In other words the builder method should be a Func<TypeToBeBuilt>. The best way to make this clear is with an example. In my application I have the following domain classes that I want to be able to use in my tests: public class Person { public string Name { get; set; } public int Age { get; set; } public bool IsAndroid { get; set; } } public class Building { public string Street { get; set; } public Person Manager { get; set; } } The builder for this domain is created like so: build = new Builder(); build.Configure(new Dictionary<Type, Func<object>> { {typeof(Building), () => new Building {Street = "Queen St", Manager = build.A<Person>()}}, {typeof(Person), () => new Person {Name = "Eugene", Age = 21}} }); Note how Building depends on Person, even though the person builder method is not defined yet. Now in a test I can retrieve a valid object from the builder: var person = build.A<Person>(); If I need a class in a customised state I can supply an Action<TypeToBeBuilt> to mutate the object post construction: var person = build.A<Person>(p => p.Age = 99); The power and efficiency of this approach becomes apparent when your tests require larger and more complex objects than Person and Building. When I get some time I intend to implement the same functionality in Javascript and Ruby. Here is the full source of the Builder class: public class Builder { private Dictionary<Type, Func<object>> defaults; public void Configure(Dictionary<Type, Func<object>> defaults) { this.defaults = defaults; } public T A<T>() { if (!defaults.ContainsKey(typeof(T))) throw new ArgumentException("No object of type " + typeof(T).Name + " has been configured with the builder."); T o = (T)defaults[typeof(T)](); return o; } public T A<T>(Action<T> customisation) { T o = A<T>(); customisation(o); return o; } }

  Read the article

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Cream of the Crop

  - by KemButller

  JD Edwards has been working hard to ensure that you shouldn't have to work so hard! Yet there are still JD Edwards customers that may not be up to speed on all the new and or improved tools and utilities we have delivered, all designed to make your life easier. So today, I want to share what I consider to be the cream of the crop….those items that every customer should know about and leverage to make ERP life just a little bit (or A LOT) easier! These are my top picks, the cream of a very good crop! Explore and enjoy, and gain some of your time back to do with as you please. · www.runjde.com It’s where to go when you need to know! The Resource Kits available on www.runjde.com provide comprehensive Resource Kits (guides) by user type. The guides provide brief descriptions of the wide array of resources that are available to JD Edwards’s eco system and links to each of those resources. · My Oracle Support (MOS) Information Centers This link will take you to an index that is designed to provide you with simple and quick navigation to the available EnterpriseOne Information Centers. This index provides links to: · EnterpriseOne Application specific Information Centers · EnterpriseOne Tools and Technology Information Centers · EnterpriseOne Performance Information Center · EnterpriseOne 9.1 and 9.0 Information Centers Information Centers give Oracle the ability to aggregate content for a given focus area and present this content in categories for easy browsing by our customers. Information Centers offer a variety of focused dynamic content organized around one or more of the following tasks. · Overview · Use · Troubleshooting · Patching and Maintenance · Install and Configure · Upgrade · Optimize Performance · Security · Certify JD Edwards Newsletters Be in the know by reading the Global Customer Support Product Newsletters. They are PACKED with news and information covering a wide range of topics and news. It is a must read if you want to know what’s happening in the JD Edwards universe! Read the latest EntepriseOne newsletter Read the latest World newsletter Learn How to receive notification when a new newsletter edition is published Oracle Learning Library – (OLL) Oracle Learn Library is the place to go for easy access to JD Edwards Application and Tools training. For a comprehensive view of the training available for a specific product/functional area, explore the Knowledge Paths For Net Change (new feature) training, explore the TOI sessions (TOI stands for Transfer Of Information). Tip: Be sure to experiment with the search filters! · www.upgradejde.com The site designed to help customers and partners with the process of upgrading JD Edwards. The site is a wealth of information, tools and resources designed to assist in the evaluation, planning and execution steps required when upgrading. Of note is the wildly successful upgrade strategy known as “The Art of the Possible” wherein JD Edwards and many of our partners hold free workshops to teach customers how to conduct upgrades in 100 days or less. Equally important is the fact that on www.upgradejde.com, customers can gain visibility into planned enhancements using the Product and Technology Feature Catalogs. The catalogs are great for creating customer specific reports about the net change between older releases and current or planned releases. Examples of other key resources on www.upgradejde.com are the product data base changes between releases, extensibility guides, (formerly known as programmer’s guides), whitepapers, ROI calculators and much more!

  Read the article

• Find Knowledge Quickly

  - by Get Proactive Customer Adoption Team

  Untitled Document Get to relevant knowledge on the Oracle products you use in a few quick steps! Customers tell us that the volume of search results returned can make it difficult to find the information they need, especially when similar Oracle products exist. These simple tips show you how to filter, browse, search, and refine your results to get relevant answers faster. Filter first: PowerView is your best friend Powerview is an often ignored feature of My Oracle Support that enables you to control the information displayed on the Dashboard, the Knowledge tab and regions, and the Service Request tab based on one or more parameters. You can define a PowerView to limit information based on product, product line, support ID, platform, hostname, system name and others. Using PowerView allows you to restrict: Your search results to the filters you have set The product list when selecting your products in Search & Browse and when creating service requests   The PowerView menu is at the top of My Oracle Support, near the title You turn PowerView on by clicking PowerView is Off, which is a button. When PowerView is On, and filters are active, clicking the button again will toggle Powerview off. Click the arrow to the right to create new filters, edit filters, remove a filter, or choose from the list of previously created filters. You can create a PowerView in 3 simple steps! Turn PowerView on and select New from the PowerView menu. Select your filter from the Select Filter Type dropdown list and make selections from the other two menus. Hint: While there are many filter options, selecting your product line or your list of products will provide you with an effective filter. Click the plus sign (+) to add more filters. Click the minus sign (-) to remove a filter. Click Create to save and activated the filter(s) You’ll notice that PowerView is On displays along with the active filters. For more information about the PowerView capabilities, click the Learn more about PowerView… menu item or view a short video. Browse & Refine: Access the Best Match Fast For Your Product and Task In the Knowledge Browse region of the Knowledge or Dashboard tabs, pick your product, pick your task, select a version, if applicable. A best match document – a collection of knowledge articles and resources specific to your selections - may display, offering you a one-stop shop. The best match document, called an “information center,” is an aggregate of dynamically updated links to information pertinent to the product, task, and version (if applicable) you chose. These documents are refreshed every 24 hours to ensure that you have the most current information at your fingertips. Note: Not all products have “information centers.” If no information center appears as a best match, click Search to see a list of search results. From the information center, you can access topics from a product overview to security information, as shown in the left menu. Just want to search? That’s easy too! Again, pick your product, pick your task, select a version, if applicable, enter a keyword term, and click Search. Hint: In this example, you’ll notice that PowerView is on and set to PeopleSoft Enterprise. When PowerView is on and you select a product from the Knowledge Base product list, the listed products are limited to the active PowerView filter. (Products you’ve previously picked are also listed at the top of the dropdown list.) Your search results are displayed based on the parameters you entered. It’s that simple! Related Information: My Oracle Support - User Resource Center [ID 873313.1] My Oracle Support Community For more tips on using My Oracle Support, check out these short video training modules. My Oracle Support Speed Video Training [ID 603505.1]

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• Passing data between the VirtualBox Host and the Guest

  - by Fat Bloke

  Here's a good question: "How can you figure out the VM name from within the VM itself?" While this data is not automatically available, the general purpose, and very powerful VirtualBox "GuestProperty" APIs can be used from the host and guest to pass arbitrary data, in key/value pairs format, in and out of the guest. Note that this does require that the VirtualBox Guest Additions have been installed in the guest. To play with this, try using the "VBoxManage" command line on your VirtualBox host machine, and "VBoxControl" in the guest. Host syntax VBoxManage guestproperty get <vmname>|<uuid> <property> [--verbose] VBoxManage guestproperty set <vmname>|<uuid> <property> [<value> [--flags <flags>]] VBoxManage guestproperty enumerate <vmname>|<uuid> [--patterns <patterns>] VBoxManage guestproperty wait <vmname>|<uuid> <patterns> [--timeout <msec>] [--fail-on-timeout]   Guest syntax VBoxControl.exe guestproperty        get <property> [-verbose] VBoxControl.exe guestproperty        set <property> [<value> [-flags <flags>]] VBoxControl.exe guestproperty        enumerate [-patterns <patterns>] VBoxControl.exe guestproperty        wait <patterns>                                      [-timestamp <last timestamp>]                                      [-timeout <timeout in ms>  So to solve our problem above, we set the vm name in the Host system on an arbitrary key like this: $ VBoxManage guestproperty set "Windows 7 (x64)" /MyData/VMname "Windows 7 (x64)" And within the guest we can use: C:\Program Files\Oracle\VirtualBox Guest Additions>VBoxControl.exe guestproperty get /MyData/VMname Oracle VM VirtualBox Guest Additions Command Line Management Interface Version 4.1.14 (C) 2008-2012 Oracle Corporation All rights reserved. Value: Windows 7 (x64) The GuestProperty API is pretty powerful, so for the interested, get more info in the User Manual. - FB 

  Read the article

• Managing Operational Risk of Financial Services Processes – part 2/2

  - by Sanjeev Sharma

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} In my earlier blog post, I had described the factors that lead to compliance complexity of financial services processes. In this post, I will outline the business implications of the increasing process compliance complexity and the specific role of BPM in addressing the operational risk reduction objectives of regulatory compliance. First, let’s look at the business implications of increasing complexity of process compliance for financial institutions: · Increased time and cost of compliance due to duplication of effort in conforming to regulatory requirements due to process changes driven by evolving regulatory mandates, shifting business priorities or internal/external audit requirements · Delays in audit reporting due to quality issues in reconciling non-standard process KPIs and integrity concerns arising from the need to rely on multiple data sources for a given process Next, let’s consider some approaches to managing the operational risk of business processes. Financial institutions considering reducing operational risk of their processes, generally speaking, have two choices: · Rip-and-replace existing applications with new off-the shelf applications. · Extend capabilities of existing applications by modeling their data and process interactions, with other applications or user-channels, outside of the application boundary using BPM. The benefit of the first approach is that compliance with new regulatory requirements would be embedded within the boundaries of these applications. However pre-built compliance of any packaged application or custom-built application should not be mistaken as a one-shot fix for future compliance needs. The reason is that business needs and regulatory requirements inevitably out grow end-to-end capabilities of even the most comprehensive packaged or custom-built business application. Thus, processes that originally resided within the application will eventually spill outside the application boundary. It is precisely at such hand-offs between applications or between overlaying processes where vulnerabilities arise to unknown and accidental faults that potentially result in errors and lead to partial or total failure. The gist of the above argument is that processes which reside outside application boundaries, in other words, span multiple applications constitute a latent operational risk that spans the end-to-end value chain. For instance, distortion of data flowing from an account-opening application to a credit-rating system if left un-checked renders compliance with “KYC” policies void even when the “KYC” checklist was enforced at the time of data capture by the account-opening application. Oracle Business Process Management is enabling financial institutions to lower operational risk of such process ”gaps” for Financial Services processes including “Customer On-boarding”, “Quote-to-Contract”, “Deposit/Loan Origination”, “Trade Exceptions”, “Interest Claim Tracking” etc.. If you are faced with a similar challenge and need any guidance on the same feel free to drop me a note.

  Read the article

• Removing occurrences of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable? Entire function string removeChars( string str, string remove ){ char[] s = str.toCharArray(); char[] r = remove.toCharArray(); bool[] flags = new bool[128]; // assumes ASCII! int len = s.Length; int src, dst; // Set flags for characters to be removed for( src = 0; src < len; ++src ){ flags[r[src]] = true; } src = 0; dst = 0; // Now loop through all the characters, // copying only if they aren’t flagged while( src < len ){ if( !flags[ (int)s[src] ] ){ s[dst++] = s[src]; } ++src; } return new string( s, 0, dst ); } as you can see, r comes from the remove string. So in my example the remove string has only a size of 3 while my str string has a size of 11. len is equal to the length of the str string. So it would be 11. How can I loop through the r string since it is only size 3? I haven't compiled the code so I can loop through it, but just looking at it I know it won't work. I am thinking they wanted to loop through the r string... in other words they got the length of the wrong string here.

  Read the article

• Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

  - by ultan o'broin

  Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

  Read the article

• Customizing the Test Status on the TFS 2010 SSRS Stories Overview Report

  - by Bob Hardister

  This post shows how to customize the SQL query used by the Team Foundation Server 2010 SQL Server Reporting Services (SSRS) Stories Overview Report. The objective is to show test status for the current version while including user story status of the current and prior versions.  Why? Because we don’t copy completed user stories into the next release. We only want one instance of a user story for the product because we believe copies can get out of sync when they are supposed to be the same. In the example below, work items for the current version are on the area path root and prior versions are not on the area path root. However, you can use area path or iteration path criteria in the query as suits your needs. In any case, here’s how you do it: 1. Download a copy of the report RDL file as a backup 2. Open the report by clicking the edit down arrow and selecting “Edit in Report Builder” 3. Right click on the dsOverview Dataset and select Dataset Properties 4. Update the following SQL per the comments in the code: Customization 1 of 3 … -- Get the list deliverable workitems that have Test Cases linked DECLARE @TestCases Table (DeliverableID int, TestCaseID int); INSERT @TestCases     SELECT h.ID, flh.TargetWorkItemID     FROM @Hierarchy h         JOIN FactWorkItemLinkHistory flh             ON flh.SourceWorkItemID = h.ID                 AND flh.WorkItemLinkTypeSK = @TestedByLinkTypeSK                 AND flh.RemovedDate = CONVERT(DATETIME, '9999', 126)                 AND flh.TeamProjectCollectionSK = @TeamProjectCollectionSK         JOIN [CurrentWorkItemView] wi ON flh.TargetWorkItemID = wi.[System_ID]                  AND wi.[System_WorkItemType] = @TestCase             AND wi.ProjectNodeGUID  = @ProjectGuid              --  Customization 1 of 3: only include test status information when test case area path = root. Added the following 2 statements              AND wi.AreaPath = '{the root area path of the team project}'  …          Customization 2 of 3 … -- Get the Bugs linked to the deliverable workitems directly DECLARE @Bugs Table (ID int, ActiveBugs int, ResolvedBugs int, ClosedBugs int, ProposedBugs int) INSERT @Bugs     SELECT h.ID,         SUM (CASE WHEN wi.[System_State] = @Active THEN 1 ELSE 0 END) Active,         SUM (CASE WHEN wi.[System_State] = @Resolved THEN 1 ELSE 0 END) Resolved,         SUM (CASE WHEN wi.[System_State] = @Closed THEN 1 ELSE 0 END) Closed,         SUM (CASE WHEN wi.[System_State] = @Proposed THEN 1 ELSE 0 END) Proposed     FROM @Hierarchy h         JOIN FactWorkItemLinkHistory flh             ON flh.SourceWorkItemID = h.ID             AND flh.TeamProjectCollectionSK = @TeamProjectCollectionSK         JOIN [CurrentWorkItemView] wi             ON wi.[System_WorkItemType] = @Bug             AND wi.[System_Id] = flh.TargetWorkItemID             AND flh.RemovedDate = CONVERT(DATETIME, '9999', 126)             AND wi.[ProjectNodeGUID] = @ProjectGuid              --  Customization 2 of 3: only include test status information when test case area path = root. Added the following statement              AND wi.AreaPath = '{the root area path of the team project}'       GROUP BY h.ID … Customization 2 of 3 … -- Add the Bugs linked to the Test Cases which are linked to the deliverable workitems -- Walks the links from the user stories to test cases (via the tested by link), and then to -- bugs that are linked to the test case. We don't need to join to the test case in the work -- item history view. -- --    [WIT:User Story/Requirement] --> [Link:Tested By]--> [Link:any type] --> [WIT:Bug] INSERT @Bugs SELECT tc.DeliverableID,     SUM (CASE WHEN wi.[System_State] = @Active THEN 1 ELSE 0 END) Active,     SUM (CASE WHEN wi.[System_State] = @Resolved THEN 1 ELSE 0 END) Resolved,     SUM (CASE WHEN wi.[System_State] = @Closed THEN 1 ELSE 0 END) Closed,     SUM (CASE WHEN wi.[System_State] = @Proposed THEN 1 ELSE 0 END) Proposed FROM @TestCases tc     JOIN FactWorkItemLinkHistory flh         ON flh.SourceWorkItemID = tc.TestCaseID         AND flh.RemovedDate = CONVERT(DATETIME, '9999', 126)         AND flh.TeamProjectCollectionSK = @TeamProjectCollectionSK     JOIN [CurrentWorkItemView] wi         ON wi.[System_Id] = flh.TargetWorkItemID         AND wi.[System_WorkItemType] = @Bug         AND wi.[ProjectNodeGUID] = @ProjectGuid         --  Customization 3 of 3: only include test status information when test case area path = root. Added the following statement         AND wi.AreaPath = '{the root area path of the team project}'     GROUP BY tc.DeliverableID … 5. Save the report and you’re all set. Note: you may need to re-apply custom parameter changes like pre-selected sprints.

  Read the article

• The gestures of Windows 8 (Consumer preview): part 2, More about Search

  - by Laurent Bugnion

  This is part 2 of a multipart blog post about the gestures and shortcuts in Windows 8 consumer preview. Part 1 can be found here! More about the Search charm In the first installment of this series, we talked about the charms and mentioned a few gestures to display the Search charm. Search is a very central and powerful feature in Windows 8, and allows you to search in Apps, Settings, Files and within Metro applications that support the Search contract. There are a few cool features around the Search, and especially the applications associated to it. I already mentioned the keyboard shortcuts you can use: Win-C shows the Charms bar (same as swiping from the right bevel towards the center of the screen). Win-Q open the Search fly out with Apps preselected. Win-W open the Search fly out with Settings preselected. Win-F open the Search fly out with Files preselected. Searching in Metro apps In addition to these three search domains, you can also search a Metro app, as long as it supports the Search contract (check this Build video to learn more about the Search contract). These apps show up in the Search flyout as shown here: Notice the list of apps below the Files button? That’s what we are talking about. First of all, the list order changes when you search in some applications. For instance, in the image above, I had used the Store with the Search charm. This is why the store shows up as the first app. I am not 100% what algorithm is used here (sorting according to number of searches is my guess), but try it out and try to figure it out Applications that have never been searched are sorted alphabetically. Does it mean we will see cool app names like ___AAA_MyCoolApp? I certainly hope not!! Pinning You can also pin often used apps to the Search flyout. To pin an app with the mouse, right click on it in the Search flyout and select Pin from the context menu. With the keyboard, use the arrow keys to go down to the selected app, and then open the context menu. With the finger, simply tap and hold until you see a semi transparent rectangle indicating that the context menu will be shown, then release. The context menu opens up and you can select Pin. Pin context menu Pinned apps Unpinning, Hiding Using the same technique as for pinning here above, you can also unpin a pinned application. Finally, you can also choose to hide an app from the Search flyout altogether. This is a convenient way to clean up and make it easy to find stuff. Note: At this point, I am not sure how to re-add a hidden app to the Search flyout. If anyone knows, please mention it in the comments, thanks! Reordering You can also reorder pinned apps. To do this, with the finger, tap, hold and pull the app to the side, then pull it vertically to reorder it. You can also reorder with the mouse, simply by clicking on an app and pulling it vertically to the place you want to put it. I don’t think there is a way to do that with the keyboard though. That’s it for now More gestures will follow in a next installment! Have fun with Windows 8   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• How to upgrade a remote server from 8.10 to newer version?

  - by DisgruntledGoat

  I have a remote server still running Ubuntu 8.10 9.04 that I can only access via SSH. If I run apt-get update I get a bunch of 404 errors on the packages. I've asked a few questions on Server Fault but got nowhere. Here's what I've done: Run apt-get update which returns errors like: Err http://gb.archive.ubuntu.com intrepid/main Packages 404 Not Found [and same for many other packages] Run do-release-upgrade which returns: Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Edited /etc/update-manager/release-upgrades and changed from Prompt=normal to Prompt=lts (as suggested here). Running do-release-upgrade after this returns: Checking for a new ubuntu release current dist not found in meta-release file No new release found (Updated) I have followed the advice in this question and changed /etc/apt/sources.list to refer to jaunty instead of intrepid. However, that distro is not online anymore either. A comment there says I have to upgrade in chronological order... So basically, it seems like I cannot upgrade because my current distro is out of date and not supported. Is there a way to upgrade direct to 10.x or 11.x? Note, as this is a server I only have command-line access. UPDATE 24/11: I have managed to upgrade from 8.10 to 9.04. Ubuntu's EOL Upgrades page provides some alternate URLs for apt sources. I also needed to update /var/lib/update-manager/meta-release to point to the old-releases server too. However, now I cannot upgrade from 9.04 to 9.10. Running do-release-upgrade produces the same error as #2 above, except it "Failed to fetch" (the URLs in meta-release are valid). The Ubuntu Jaunty upgrade page says it's necessary to upgrade using a CD image. I followed the instructions here, but it didn't work: A fatal error occurred Please report this as a bug and include the files /var/log/dist-upgrade/main.log and /var/log/dist-upgrade/apt.log in your report. The upgrade is now aborted. Your original sources.list was saved in /etc/apt/sources.list.distUpgrade. Traceback (most recent call last): File "/tmp/tmp.JLhTwVUugb/karmic", line 7, in sys.exit(main()) File "/tmp/tmp.JLhTwVUugb/DistUpgradeMain.py", line 132, in main if app.run(): File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 1590, in run return self.fullUpgrade() File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 1506, in fullUpgrade if not self.doPostInitialUpdate(): File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 762, in doPostInitialUpdate self.quirks.run("PostInitialUpdate") File "/tmp/tmp.JLhTwVUugb/DistUpgradeQuirks.py", line 83, in run for plugin in self.plugin_manager.get_plugins(condition): File "/tmp/tmp.JLhTwVUugb/computerjanitor/plugin.py", line 167, in get_plugins filenames = self.get_plugin_files() File "/tmp/tmp.JLhTwVUugb/computerjanitor/plugin.py", line 120, in get_plugin_files basenames = [x for x in os.listdir(dirname) OSError: [Errno 2] No such file or directory: './plugins' It does say to report the bug, but since this is an old unsupported release I don't know if it's worth doing. However, is there a way round this, to upgrade from 9.04 to 9.10 (And then finally to 10.04 LTS.)

  Read the article

• Kinect losing tracked players with Beta2 SDK

  - by Eric B

  So i'm creating a game using the Beta2 SDK for Kinect. The issue i am having is that in the middle of gameplay if another person enters the Kinects FOV it stops tracking the player and will not track anyone else for several minutes. Same deal if the player leaves the FOV and reenters it. Here is what im using to detect players. void nui_SkeletonFrameReady(object sender, SkeletonFrameReadyEventArgs e) { int playersAlive = 0; // reset lists skeletons = new Dictionary<int, SkeletonData>(); //create a new list for skeletons menuSkeleton = new List<SkeletonData>(); initialPlayers = new Dictionary<float, SkeletonData>(); //create a new list for initialPlayers foreach (SkeletonData s in e.SkeletonFrame.Skeletons) //for each skeleton the kinect has detected { if (s.TrackingState == SkeletonTrackingState.Tracked) // players found { menuSkeleton.Add(s); if (initialized) // after initialization { skeletons.Add(s.TrackingID, s); } else // before initialization initialPlayers.Add(s.Joints[JointID.ShoulderCenter].Position.X, s); //if we are not initialized then add this player to the inital player list. playersAlive++; } } if (playersAlive == TOTAL_PLAYERS_ALLOWED) // If there is one player { if (!inMiniGame) // Before the game starts gameStart = DateTime.Now; // Reset initialization timer if (!initialized) // Before initialization // NOTE TO SELF I TOOK OUT && inMenu { InitializePlayers(); if (DateTime.Now.Subtract(gameStart).TotalMilliseconds > INITIALIZATION_WAIT_TIME) { initialized = true; // initialize timers from fixed starting time if (inMiniGame) //if the game has started { gamePause = gameStart; //TODO ERIC: Initialize any Timers Here } } } } } /// <summary> /// this function initializes the players adding them to a list /// and making one of the players the menu controller, for LIM we will need to change the code so that the /// game only recognizes and supports one player at a time /// variable names will need to be change as well. /// </summary> private void InitializePlayers() { List<float> initialPos = new List<float>(); // used to track starting positions players = new Dictionary<int, Player>(); foreach (float pos in initialPlayers.Keys) { initialPos.Add(pos); //add position of each inital player to list } float first = initialPos[0]; // left player first, right second Player player = new Player(initialPlayers[first].TrackingID, true); player.PlayerNumber = PLAYER_ONE; player.Skeleton = initialPlayers[first]; player.Specifics = new PlayerSpecifics(player.PlayerNumber); player.Specifics.PauseTimer = gameStart; players.Add(initialPlayers[first].TrackingID, player); menuController = initialPlayers[first].TrackingID; //menu controller is player 1 } This is a one player game. Also when the game starts Initialize is set to false, and gets set to true when i go from the games menu into the gameplay. So can anyone see any issues with this code block that would cause the kinect to lose players as they enter/exit the FOV? and not re-track them? Thank you for any help.

  Read the article

• How do you deal with poor management [closed]

  - by Sybiam

  I come from a company where during a project, we saw the client 3 time during the whole project. We were never informed when did the client came in office in order to discuss with him about his requirements. I did setup redmine and told them that if they have any request they can post an issue there. But they never really used redmine to publish anything. They would instead: harass a team member on the phone at any time of the day or night hand us over sheets of paper with new requests or changes hand us over new design (graphical) They requested how much time it would take us to finish the project, I gave them a date and a week to test everything and deployment. I calculated that time taking into account the current features we had to do. And then blamed us that our deadline was wrong and that we lied. But the truth is that one week before that deadline they added a couple of monster feature from nowhere and that week were we were supposed to test and deploy, my friends spent all day in the office changing all little things. After that project, my friend got some kind of depression and got scared everytime his phone rang. They kind of used him as a communication proxy. After that project of hell, (every body got pissed off on that project) as far as I know the designer who was working with us left work after that project and she had some kind of issue too with managers. My team also started looking for work somewhere else. At first I tried to get things straight with management, I tried to make a meeting to discuss about the communication issues and so on.. What really pissed me off and made me leave that job for good is the following. Me: "We have to discuss about what went wrong on the last project. It's quite important" Him: "Lets talk about it in a week or two. Just make a list of all the things you did wrong" Me: "We already have a new project and we want to prevent what happened on the last project to happen again" Him: "Just do it and well have our meeting in a week, make a list of all the thing you did wrong." It kind of ended there then he organized a meeting at a moment I wasn't unable to come. My friend discussed with him and tried to explained him that we really had to discuss about organization issue on how to manage a project. And his answer was pretty much: "During the meeting I don't want to ear how you want to us to manage a project but I want to know what you guys did wrong" After that I felt it wasn't even worth it discussing anything since they weren't even ready listening to us. Found a new job and I'm pretty happy with my choice. I'd like to know how you'd handle such situation. Is there anything to do to solve communication problem? After that project my friend got a depression and some other employee had their down too as far as I know. I wonder what else we can do other than leave these place as soon as possible. Feel sad for the people that are still there and get screamed at just because they need money in order to eat and finding an other job like that isn't that easy. note I died a little when our boss asked us to make a list of things we (programmers) did wrong. This is probably the stupidest request I ever got. If everybody thinks they did everything right, it doesn't mean that there is no problems. Individual problem are rarely the big issue. Colleagues help each others and solve theses issues to prevent problems.

  Read the article

• How to deal with overly aggressive "Link Take Down Demands"?

  - by Eoin

  I've been receiving a large number of emails recently requesting I clean from link spam from my forum. Initially the emails were very polite and professional, and I was happy to remove the links. Recently the email have gotten very abrasive, here is a particularly rude example: From: [email protected] To: [email protected] Hi, This is the second time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We really do need to remove this link. We have to report to Google any link we were unable to remove, and I wouldn't want to have to include your site in the list. Could you please remove our link from this page and any other page on your site? Thank You, Name Changed Behind the superficial pleasantries I feel there is some very real maliciousness. Note the email address, DMCA Violations, I don't see how the DMCA is involved here, except as a word which tends to strike fear in many people. Also relating to the email address, it doesn't match the company being linked to at all. How am I to trust they are truely operating on behalf of company-two when they don't even use one of it's email addresses. My email is hidden by privacypost. While a service with legitimate uses, I feel it's highly unprofessional for communications between to companies. The claim "This is the second time..." Every email I've received has started like this, but a check of my spam filters has never revealed a 1st mail. Initially I gave them the benefit of the doubt, by now though it's clear this is a cheap ploy to start me off on the defensive. And finally worst of all- the threats of reporting me to Google if I don't do everything they ask. I sent a polite reply asking for more information. I have no idea if the email address was even valid but I never received any response. Much later I got this followup mail From: [email protected] To: [email protected] Hi, This is the final time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We will soon be reporting to Google any link we were unable to remove, and currently your site will have to be on the list. Could you please remove our link from this page and any other page on your site? I appreciate your urgent attention to this matter. Thank You, Name Changed This time the from address was more personal, though still not obviously connected to the spammed company. Lets be honest, I don't for one second believe that the companies were the victim of a 3rd party spammer as they claim. The links in questions were generated well over a year ago, and I firmly believe the companies were directly responsible for the spam links in question, a type of spam that has plagued my forum. Now they have the audacity to demand I spend my time cleaning up their mess, using threats to ensure they get their way. Have recent changes in Googles algorithms meant all the cash they spent spamming the web has now turned into a liability? If so I can see why these companies are all of a sudden running scared. Frankly, cleaning up my forum is a good things, but the threats they are using sickens me. So my question here is specifically about the threats: Are they vaild, and would such reports to Google destroy my page rankings? Is there a way I can report this abusive behaviour to Google?

  Read the article

• Video works with 'Try me' but not after install. What is the difference? U12.04LTS,

  - by HarveyP

  My hard drive got corrupted so I did a reinstall. Tested Youtube in FF during 'try me' and it worked - jerky, but it worked. Instal without all the updates (576 outstanding now) in order to get ff installed as per the demo - to no avail. In 'try me' mode ff NEVER crashed! After install ff crashed whilst I was typing in 'youtube' in the address field. When I finally got to youtube - no video. What is the difference between ff in try me and ff after install? Off to try some selected updates now to see if I can see it for myself. In previous installation I had several profiles and aliased ff with -safe-mode switch to simplify startup of most stable ff. Also found that ff startup in graphic mode worked better (but still without video) with all of the extensions disabled and all of the plugins set to "ask" and always denied ... I have SiS graphic card in SiS Motherboard for XP and ancient Hyundai ImageQuest QV770 monitor. I have Ubuntu 12.04.01 LTS 1 day after install with only the immediate upgrades requested to language pack (English UK). Using FR Alternative keyboard. Connected with domestic wifi network from Orange (FT) I really want to use Skype, but won't bother installing it (again) without video as I can do my sms on FB - whilst ff is not crashed ... Update ... Is something overflowing? I have just had to reboot in order to get ff to restart in any way shape or form - restart on crash form generates new crash form, etc. It was however a good half hour before it crashed so some improvement over conditions before disk corruption. I have now installed all of the critical updates (332 recommended updates still outstanding) which included some relating to ff. Still no video. Still crashing - especially when on Grepolis website. Since the re-install I have had a lovely 1024x768 screen, but after last ff crash and reboot I got a message about 'low graphics mode' and 'setting things myself'. I was not sufficiently tuned in at the time to take proper note - I have no doubt I shall see it again and shall report accordingly. I still have only laptop options for my screen and do not know how to rectify this. Spent a few days with ubuntu on a different, newer machine which has now suffered a graphics breakdown. Returned to this old one again, but with new flat screen Monitor. Found SIS drivers for my graphics BUT it is intended for Red Hat 7.2. I chose this over the version for 7.0 because I thought what the hell, I might not be able to do anything with either of them but this is the later one ... The file will not open with software manager - found a similar problem on Overclock but it has not helped me to install this driver. File name is sis_drv.o-410 and it is currently idling away in my Downloads folder ... I have tried the solution offered on another sis problem, but this shows that my xserver-xorg-video-sis driver is up to date. I am now at a loss as to how to proceed if I can't install the latest sis driver from sis ... Does nobody know how FF changes from "try-me" to "installed"? Any time I MUST have video I reboot from the disk again, but this is tedious! Also one of the things I mock most about MS is the constant rebooting ... UPDATE 10/6/2014 I have installed chromium-browser - worse, crashes even more often than ff.I have installed epiphany - better; Video works but not the associated soundtrack.FireFox is version 14.01 in 'try me' and version 29.0 from my install. Would it be useful to try to downgrade FireFox in order to get video?

  Read the article

• Data breakpoints to find points where data gets broken

  - by raccoon_tim

  When working with a large code base, finding reasons for bizarre bugs can often be like finding a needle in a hay stack. Finding out why an object gets corrupted without no apparent reason can be quite daunting, especially when it seems to happen randomly and totally out of context. Scenario Take the following scenario as an example. You have defined the a class that contains an array of characters that is 256 characters long. You now implement a method for filling this buffer with a string passed as an argument. At this point you mistakenly expect the buffer to be 256 characters long. At some point you notice that you require another character buffer and you add that after the previous one in the class definition. You now figure that you don’t need the 256 characters that the first member can hold and you shorten that to 128 to conserve space. At this point you should start thinking that you also have to modify the method defined above to safeguard against buffer overflow. It so happens, however, that in this not so perfect world this does not cross your mind. Buffer overflow is one of the most frequent sources for errors in a piece of software and often one of the most difficult ones to detect, especially when data is read from an outside source. Many mass copy functions provided by the C run-time provide versions that have boundary checking (defined with the _s suffix) but they can not guard against hard coded buffer lengths that at some point get changed. Finding the bug Getting back to the scenario, you’re now wondering why does the second string get modified with data that makes no sense at all. Luckily, Visual Studio provides you with a tool to help you with finding just these kinds of errors. It’s called data breakpoints. To add a data breakpoint, you first run your application in debug mode or attach to it in the usual way, and then go to Debug, select New Breakpoint and New Data Breakpoint. In the popup that opens, you can type in the memory address and the amount of bytes you wish to monitor. You can also use an expression here, but it’s often difficult to come up with an expression for data in an object allocated on the heap when not in the context of a certain stack frame. There are a couple of things to note about data breakpoints, however. First of all, Visual Studio supports a maximum of four data breakpoints at any given time. Another important thing to notice is that some C run-time functions modify memory in kernel space which does not trigger the data breakpoint. For instance, calling ReadFile on a buffer that is monitored by a data breakpoint will not trigger the breakpoint. The application will now break at the address you specified it to. Often you might immediately spot the issue but the very least this feature can do is point you in the right direction in search for the real reason why the memory gets inadvertently modified. Conclusions Data breakpoints are a great feature, especially when doing a lot of low level operations where multiple locations modify the same data. With the exception of some special cases, like kernel memory modification, you can use it whenever you need to check when memory at a certain location gets changed on purpose or inadvertently.

  Read the article

• Gnome-shell fails to load on 12.10

  - by Githlar

  I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

  Read the article

• SharePoint For Newbie Developers: Code Scope

  - by Mark Rackley

  So, I continue to try to come up with diagrams and information to help new SharePoint developers wrap their heads around this SharePoint beast, especially when those newer to development are on my team. To that end, I drew up the below diagram to help some of our junior devs understand where/when code is being executed in SharePoint at a high level. Note that I say “High Level”… This is a simplistic diagram that can get a LOT more complicated if you want to dive in deeper.  For the purposes of my lesson it served its purpose well. So, please no comments from you peanut gallery about information 3 levels down that’s missing unless it adds to the discussion.  Thanks So, the diagram below details where code is executed on a page load and gives the basic flow of the page load. There are actually many more steps, but again, we are staying high level here. I just know someone is still going to say something like “Well.. actually… the dlls are getting executed when…”  Anyway, here’s the diagram with some information I like to point out: Code Scope / Where it is executed So, looking at the diagram we see that dlls and XSL are executed on the server and that JavaScript/jQuery are executed on the client. This is the main thing I like to point out for the following reasons: XSL (for the most part) is faster than JavaScript I actually get this question a lot. Since XSL is executed on the server less data is getting passed over the wire and a beefier machine (hopefully) is doing the processing. The outcome of course is better performance. When You are using jQuery and making Web Service calls you are building XML strings and sending them to the server, then ALL the results come back and the client machine has to parse through the XML and use what it needs and ignore the rest (and there is a lot of garbage that comes back from SharePoint Web Service calls). XSL and JavaScript cannot work together in the same scope Let me clarify. JavaScript can send data back to SharePoint in postbacks that XSL can then use. XSL can output JavaScript and initiate JavaScript variables.  However, XSL cannot call a JavaScript method to get a value and JavaScript cannot directly interact with XSL and call its templates. They are executed in there scope only. No crossing of boundaries here. So, what does this all mean? Well, nothing too deep. This is just some basic fundamental information that all SharePoint devs need to understand. It will help you determine what is the best solution for your specific development situation and it will help the new guys understand why they get an error when trying to call a JavaScript Function from within XSL.  Let me know if you think quick little blogs like this are helpful or just add to the noise. I could probably put together several more that are similar.  As always, thanks for stopping by, hope you learned something new.

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >