Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 491/594 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

• Find the IP of the router between me and main router/gateway?

  - by Crash893

  I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

  Read the article

• IIS login / logout interferes with media player

  - by Mark Sowul

  So I'm listening to music with Windows Media Player, going insane because the music randomly stops playback every so often. I finally notice that it correlates with instances of csrss, winlogon, and logonui repeatedly starting and quitting. I finally tracked that down to IIS repeatedly logging on and off due to WebDAV requests going through my user account (my laptop syncing up with OneNote over WebDAV). I see tons of spam in my security event log for the logins. I am surprised that IIS needs to log in this much. This has only been happening for a couple of months. I'm not sure where the actual problem lies - with IIS, or Media Player, or what, so I figured I'd try and find out if the IIS login behavior is actually abnormal. Is it normal for IIS to log in this much? And is it normal for that to keep spawning winlogon, csrss, and logonui every second or so? I see a constant stream of logon events in the event log every few seconds presumably while OneNote is syncing. Logon (id = 1, source = laptop), Special Logon (id = 1, sets up privileges), Special Logon (id = 1, seems to set up the same privileges), Logon (id = 2, same laptop), Logoff (id = 2), Logoff (id = 1) The DefaultAppPool (only one apparently in use) has its idle timeout set to 20 minutes, and load user profile set to false. Not sure what other settings (if any) might be relevant.

  Read the article

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

• Permission issue for apache

  - by Aamir Adnan

  Environment Details: Amazon Ec2 Ubuntu 12.04 Django + mod_wsgi + python 2.6 web server: apache2 I have mounted a 10GB ebs volume to an instance to /mnt/ebs1/. After mounting the volume and formatting, I have placed all my project files in /mnt/ebs1/project. the wsgi file is in /mnt/ebs1/project/apache/django.wsgi. The content of wsgi file is: import os, sys sys.path.insert(0, '/mnt/ebs1/project') sys.path.insert(1, '/mnt/ebs1') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.configs.common.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() My httpd.conf file looks as: LoadModule wsgi_module /usr/lib/apache2/modules/mod_wsgi.so WSGIPythonHome /usr/bin/python2.6 WSGIScriptAlias / /mnt/ebs1/project/apache/django.wsgi <Directory /mnt/ebs1/project> Order allow,deny Allow from all </Directory> <Directory /mnt/ebs1/project/apache> Order allow,deny Allow from all </Directory> Alias /static/ /mnt/ebs1/project/static/ <Directory /mnt/ebs1/project/static> Order deny,allow Allow from all </Directory> The above configurations gives me Forbidden: You don't have permission to access / on this server. I tried to find the user which is running apache using ps aux which is www-data and has group www-data. I have tried to change the ownership of /mnt/ebs1 and its subdirectories using chown -R www-data:www-data /mnt/ebs1 but that still does not solve the problem. Can any one tell me what I am doing wrong or have missed?

  Read the article

• Why can't I renew my dynamic IP address?

  - by qwerty

  So, I'm going to explain this from the start. I've started a project with a friend of mine which includes a webspider, that crawls through all pages on a site and stores them in a DB. Since I've never done this before, I didn't think about the amount of requests I was actually sending to the site, and after a day or two I finally got my IP blocked. I need to be able to visit that site as it's very important to me. Not only for my project, but for other reasons too. (and if I'm able to renew my IP I'm going to set a delay on the crawler so I don't get blocked & DDOS the site) I have a dynamic IP address, at least that's what my router settings say. I've tried ipconfig /flushdns, ipconfig /release, restart computer. No result. I end up with the same IP address. I've also tried renewing it from the router, however, I think it uses the same method which isn't working. Is it possible that site has blocked my mac address? Can a site even access my mac address?

  Read the article

• Getting SMB file shares working over a PPTP VPN

  - by Ben Scott

  I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to 127.0.0.1, and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else.

  Read the article

• IIS 7.5 Warning : Cannot verify access to the path

  - by Mostafa

  I'm newbie in IIS 7.5 , Before this I used to run ASP.NET Website under IIS 5 , That was too easy . I'm trying to run a very simple asp.net website ( just created a new website from VS 2010 targeted in .net 3.5) in IIS 7.5.7600 on windows 7 Ultimate 64 bit . While adding application , during Test Setting i receive one warning that says : The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that \$ has Read access to the physical path. Then test these settings again But I don't know how to make sure application pool identity has read access to the physical path ? I'm wondering if there is any step by step article or some thing that show me the walk-though for running a simple asp.net website on IIS 7.5? I appreciate any help .

  Read the article

• Compiling linux kernel, how much size is needed?

  - by ant2009

  Hello, I am have downloaded the newest most stable linux kernel 2.6.33.2 I thought I would test this using virtualbox. So I create a dynamically sized harddisk of 4gb. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4gb, but the actual size is 3.5gb $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a linux kernel? Is there any guidelines to follow when doing this? This is my first time, so just experimenting with this. Many thanks,

  Read the article

• Linux And NTFS Permissions

  - by VGE IT

  Trying to restrict a folder within a directory created in linux filesystem. I have changed the permissions to: root rwx, a special active directory group rwx and all others r. Upon doing so, people that are not in the special AD group can access the directory and modify files. Upon doing so the group changes to "Domain Users" when the user modifies documents within the directory. I have to manualy change the documents default group back to my AD group. I have tried to create another AD group and modify permissons to deny write access. When doing so through windows explorer, the settings seem to take affect until I go back in a look at permissions for the restricted group. No permissions show when I view for the second time. Please assist. Samba share properties [MyShare] comment = "blah blah blah" browseable = yes guest ok = no read only = no path = /xxx/xxxxx/ create mask = 0640 directory mask = 0750 admin users = @"domain\Domain Admins", @"domain\group A", @"domain\group B" valid users = @"domain\Domain Admins", @"domain\group A", @"domain\group B" nt acl support = Yes inherit acls = yes inherit owner = yes inherit permissions = yes

  Read the article

• Best way to integrate applications to windows 7 install.wim image

  - by cyph3r

  I have right now an unmodified .iso of a windows 7 32bit and 64bit installation disk. And I need to integrate to that some applications (office, adobe reader etc) and windows updates so that when windows are installed the above applications/updates are already installed and working. Requirements: My output has to be a install.wim image containing the new/improved windows installation files because the deployment is done via a pxe server and a custom windowsPE enviroment. The procedure to create the install.wim has to be as automatic as possible. I can't create it manually every time I want to incorporate a new windows or application update to the image. The image will be installed on 100+ computers so it needs to be 'generic'. I've never done something like this before but from what I searched a possible solution to this issue would be: To create a reference installation (preferably on a vm so I can take snapshots) complete with its applications/updates/settings. After the complete setup I take a snapshot of the installation Run C:\Windows\System32\sysprep\sysprep.exe /oobe /generalize /shutdown to sysprep the machine. Boot to a WindowsPE enviroment and capture the .wim image using gimagex. Deploy the .wim and enjoy the rapid installation times. :D Does that sound ok? Would you recommend anything else? Right now the applications are installed after the installation of windows is complete. So the total installation time is quite long. That's why I need a different approach.

  Read the article

• MySQL Config on Large Machine

  - by Jonathon

  We have a Windows 2003 Enterprise Edition server (64bit) running only MySQL 5.1.45 64-bit. It has 16G RAM and 10T of hard-drive space in RAID 10. We are having horrible performance from mysqld (85-100% CPU utilization). We were running a smaller machine with better performance, so I am assuming our my.ini file is not correct for our current machine. The my.ini file is as follows: [client] port=3306 [mysql] default-character-set=latin1 [mysqld] port=3306 basedir="D:/MySQL/" datadir="D:/MySQL/data" default-character-set=latin1 default-storage-engine=MYISAM sql-mode="" skip-innodb skip-locking max_allowed_packet = 1M max_connections=800 myisam_max_sort_file_size=5G myisam_sort_buffer_size=500M table_open_cache = 512 table_cache=8000 tmp_table_size=30M query_cache_size=50M thread_cache_size=128 key_buffer_size=3072M read_buffer_size=2M read_rnd_buffer_size=16M sort_buffer_size=2M #replication settings (this is the master) log-bin=log server-id = 1 Does anyone see anything wrong with this setup? For a machine with this much RAM, why in the world would mysqld eat up so much CPU? I know we can optimize some queries, etc., but it did run okay on a smaller machine, so I am pretty sure it is the config. Thanks in advance for any help.

  Read the article

• Coming from Win XP to 7 and having new accessibility software problems

  - by Anonymous Jones

  I just switched from Windows XP Pro SP3 (32bit) to Windows 7 Ultimate (32bit) on a new PC. Now, both the new onscreen keyboard and a utility for sending mouse clicks are being problematic. The problem with 7's OSK is that some things I type only work intermittently or just dodgily. Like Alt+Tab with multiple Tabs, other Alt/Ctrl/Shift/Win key combinations, and the context menu key. Sometimes apps will not take focus for input at all. I use the OSK it in 'hover' mode, on 0,5 seconds. The clicking tool is Point-N-Click, which sends clicks when I dwell anywhere for 1.25 seconds with the mouse pointer. http://www.polital.com/pnc/ The problem with it is that sometimes it fails to click. Most often this happens in some of the control panel sections, on the taskbar, and when UAC pops up. It seems to occur in conjunction with OSK usage a bit too, I think. I'm using an Administrator account. DEP and UAC settings are default. What can I do to fix or work around either of these problems? I'm disabled so this really is killing usability.

  Read the article

• CentOS Latency High Troubleshooting

  - by Sarah Weinberger

  I have two CentOS servers connected via a 10 Gb fiber optic cable with a network emulator connected between them. All three units sit on a desk in the lab. There is also a regular 1 Gbit Ethernet cable connected to each of the machines, which provide internet connectivity. When I set the latency to something roughly below 30 ms, all is fine. When the latency gets to 70ms and above, and definitely 130ms, the network layer suspends. For instance, if I set the latency (delay) to 70ms, then launching TeamViewer (or any other application that uses network connectivity) never happens or does not work. There is no timeout message, simply no response. I have to lower to latency back down to zero to see any response and have the box start working. What is the problem and how would I go about fixing it? It seems to me some sort of setting in Linux causes one of the CentOS networking drivers to sit in an infinite loop or something. eth0 is the connection to the internet, all settings are default eth2 is the 10 Gbit fiber optic connection to the other computer with the MTU set to 9600 with all other parameters at default values.

  Read the article

• I think installing PostFix solved my problem, but it seemed *too* easy

  - by Joel Marcey

  Hi, This is a followup to a serverfault post I made a while ago: http://serverfault.com/questions/21633/how-do-i-target-a-different-mail-server-depending-on-domain-with-exim (More context here too: http://forum.slicehost.com/comments.php?DiscussionID=3806 ) I have a slice/VPS at Slicehost. I basically decided to scrap exim (i.e., purge it), and start anew with my email infrastructure. In case you didn't read any of the above threads, basically my goal was to have a send only mail infrastructure that relays all outgoing email to Google Apps. I also wanted to where email from domain1 (a Wordpress installation) would show it coming from domain1.com and email from domain2 (a normal website) would show it coming from domain2.com. So I decided to give PostFix a try. I literally followed the surprisingly simple instructions here: http://sudhanshuraheja.com/2009/02/slicehost-setup-outgoing-mail-google-apps-postfix/ And voila, all seems to be working as I expected. My email tests show email coming from the proper locations (either domain1 or domain2 depending on where the emails were sent from). But this all seemed too simple to me. So simple, in fact, that I feel that something is amiss. When I installed PostFix according to the instructions in the post above and it worked, I was surprised that I didn't have to specify an SMTP server, a port number, any authentication credentials, etc. My slice is set up such that I have MX records for Google Apps (e.g., ASPMX.L.GOOGLE.COM.) in my DNS settings, but I am not sure if that is why it is working. My email infrastructure knowledge is admittedly limited, but with this am I suspect to: Spammers using my email infrastructure? My emails going to people as spam? Something else sinister? I have actually stopped running PostFix until I understand this better. Thanks!

  Read the article

• Postfix misconfigured? 550 Sender rejected from recieving server

  - by wnstnsmth

  We use Postfix on our CentOS 6 machine, having the following configuration. We use PHP's mail() function to send rudimentary password reset emails, but there is a problem. As you will see, mydomain and myhostname is correctly set, afaik. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = ***.ch myhostname = test.***.ch newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 Now this is the stuff that is in the /var/log/maillog of Postfix upon sending an email to ***.***@***.ch, with ***.ch being the same domain our sending server test.***.ch is on: Dec 13 16:55:06 R12X0210 postfix/pickup[6831]: E6D6311406AB: uid=48 from=<apache> Dec 13 16:55:06 R12X0210 postfix/cleanup[6839]: E6D6311406AB: message-id=<20121213155506.E6D6311406AB@test.***.ch> Dec 13 16:55:07 R12X0210 postfix/qmgr[6832]: E6D6311406AB: from=<apache@test.***.ch>, size=1276, nrcpt=1 (queue active) Dec 13 16:55:52 R12X0210 postfix/smtp[6841]: E6D6311406AB: to=<***.***@***.ch>, relay=mail.***.ch[**.**.249.3]:25, delay=46, delays=0.18/0/21/24, dsn=5.0.0, status=bounced (host mail.***.ch[**.**.249.3] said: 550 Sender Rejected (in reply to RCPT TO command)) Dec 13 16:55:52 R12X0210 postfix/cleanup[6839]: 8562C11406AC: message-id=<20121213155552.8562C11406AC@test.***.ch> Dec 13 16:55:52 R12X0210 postfix/bounce[6848]: E6D6311406AB: sender non-delivery notification: 8562C11406AC Dec 13 16:55:52 R12X0210 postfix/qmgr[6832]: 8562C11406AC: from=<>, size=3065, nrcpt=1 (queue active) Dec 13 16:55:52 R12X0210 postfix/qmgr[6832]: E6D6311406AB: removed Dec 13 16:55:52 R12X0210 postfix/local[6850]: 8562C11406AC: to=<root@test.***.ch>, orig_to=<apache@test.***.ch>, relay=local, delay=0.13, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Dec 13 16:55:52 R12X0210 postfix/qmgr[6832]: 8562C11406AC: removed So the receiving server rejects the sender (line 4 of log output). We have tested it with one other recipient and it worked, so this problem might be completely unrelated to our settings, but related to the recipient. Still, with this question, I want to make sure we're not making an obvious misconfiguration on our side.

  Read the article

• Motion - takes snapshot without motion detected

  - by Emmanuel Brunet

  I've been installed the standard motion 3.2.12 package on debian 7.5. I would like to get snapshot ONLY when motion is detected, but it still saves a picture every second without any activity in front of the camera. I'm using a TENVIS JPT3815W IP camera motion.conf here is my configuration file setup_mode off target_dir /media/videos/log/webcam netcam_url http://webcam/snapshot.cgi netcam_tolerant_check on netcam_userpass admin:alpha1237 # Output frames at 1 fps when no motion is detected and increase to the # rate given by webcam_maxrate when motion is detected (default: off) webcam_motion off output_all off # detection settings 1-255 default 32 noise_level 50 # Maximum framerate for webcam streams (default: 1) webcam_maxrate 25 pre_capture 0 framerate 25 gap 30 locate on mail [email protected] text_right "FRONT CAMERA %Y/%m/%d - %T" text_double on ffmpeg_cap_new on ffmpeg_cap_motion on ffmpeg_video_codec mpeg4 output_motion off snapshot_interval 0 # Quality of the jpeg (in percent) images produced (default: 50) quality 90 # Restrict webcam connections to localhost only (default: on) webcam_localhost off # Limits the number of images per connection (default: 0 = unlimited) # Number can be defined by multiplying actual webcam rate by desired number of seconds # Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate webcam_limit 0 Issue when I start motion images are stored in /media/videos/log/webcam nearly every second. I hjust want to get images when a motion is detected and the according video clip Any idea where the configuration fails ?

  Read the article

• VPN Client solution

  - by realtek

  I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

  Read the article

• Truncated content with Apache on Vagrant VM

  - by Nev Stokes

  I'm using Vagrant to run a CentOS VM in order to try and achieve local development parity with our live servers. I've symlinked /var/www/html with the /vagrant shared directory and am forwarding port 80 for viewing at http://localhost:4567. I'm developing using SublimeText 2 on OS X Mountain Lion. Once I figured that iptables was tripping me up, all was well and good. Until I noticed something strange. I have a sample HTML page consisting of several paragraphs of lorem copy. I can view this fine in a browser on OS X. But when I make an edit, for example removing a paragraph, and refresh the content is truncated with the paragraph I deleted still visible. When I cat the files on the server I can see the changes I made but these aren't even reflected when I curl localhost. I strongly suspect that it's a problem with my Apache settings — with which I didn't really tinker — as the issue doesn't arise when I stop Apache and run sudo python -m SimpleHTTPServer 80 in the directory to view pages instead. What gives?

  Read the article

• Affordable combined Ruby/Rails/Redmine + Subversion hosting?

  - by Pekka

  I'm a self employed web developer and after nine years of hard work, I'm looking to become a bit more "vagrant" starting next year, do some much-needed traveling and a bit and work off and on, making use of one of the greatest advantages of a programming job: The ability to work virtually from everywhere. For that, I am looking for a reliable hosting company I can entrust my code to in the form of a number of Subversion repositories, and an installation of the Redmine project management tool. As my financial situation may vary during traveling, I am looking for something I can pay up front for a year or two, and is obviously not too pricey. I don't care where the company is located, as long as it's trustworthy and solid, meaning it's not likely to go out of business next month. Does anybody know good recommendations? Preferably from own, personal, good experience. I have looked at CVSDude / Codesion and while they are certainly great, they don't offer Redmine of course, and seem to be aiming toward bigger organizations mainly. What I would need: 2-5 Gigs of space minimum, freely distributable between SVN, and Redmine attachments Unlimited number of Subversion projects Access control (team members / checkout-only accounts / etc.) I don't mind configuring the svn settings on file basis myself I need the possibility to map a custom domain to the package that is hosted elsewhere Frequent backups and access to those backups through FTP or other means I have been running my own virtual server for this until now, but I don't want the hassle, especially on the security side, while I may not always have the internet connection to fix problems that may come up.

  Read the article

• Windows 7 won't boot from any bootloader except for Windows Boot Manager after partition resize

  - by user2468327

  I have a triple boot system on a single SSD: OSX, Windows 7, and Ubuntu. I use Chimera (basically another version of Chameleon) as my bootloader. Usually I can boot all 3 OSs without any issue, but after using GParted to make my Ubuntu partition 2 Gigs larger, Windows 7 throws me an error when trying to boot to it from either Chimera or Grub. The error is consistently: `0xc000000e can't find \Boot\BCD" (slightly paraphrased). However, I can still get into Windows by selecting Windows Boot Manager from the boot options in my BIOS. I've already tried several known fixes for similar issues, including bootrec /rebuildbcd (and variations), and BootRec.exe/fixMBR + BootRec.exe/fixBoot. I've also tried Chkdsk. At best this has made it so Windows 7 boots on its own by default (making me have to reinstall Chimera and change back my boot settings in the BIOS). At worst this made it so Windows won't boot period. Now I'm back full circle where I started. A detail that might be useful is that bootrec /rebuildbcd says that the number of found Windows installations is 0. I'm fairly certain that I don't have a hybrid MBR. Mainly because I have a UEFI BIOS, and with that, it appears each OS can support a GPT. So it would kind of pointless to have and deal with. I may be wrong though, I couldn't find any way of finding out for sure online. However, I know for sure that the version of Windows I have installed is the UEFI version, as well as every partition tool I've used to look at my boot drive tells me it's GPT. How do I get it back so I can boot Windows 7 through another bootloader so I don't have to manually select it in the BIOS? Preferably without a reinstall.

  Read the article

• Windows Server 2008 R2 - VPN Folder Sharing Permissions

  - by daveywc

  I have setup VPN access to my Windows Server 2008 R2 server using RRAS. Clients can connect, run applications, view shares etc. My problem is that one of the applications that they use relies on some network shares. The application is not able to access the shares unless the user first goes into Windows Explorer and accesses the share, providing their user name and password (the same one that they use to connect via the VPN). Previously on a different Windows Server 2008 (not R2) this was not necessary i.e. the application and user could access the share without providing another user name and password. I have tried giving the Everyone group full control over the shared folder - both on the Security tab and in the Permissions area under Advanced Sharing on the Sharing tab. This still did not resolve the issue. (I don't really want to give Everyone access anyway - I was hoping that granting access to a group that the VPN users had membership of would be enough). I have also turned off password protected sharing in the Advanced Sharing Settings area of the Network and Sharing Center (under both Home or Work and Public). So my question is what is preventing my VPN users from having access to these folders without having to re-supply the same login and password that they use to access the VPN? And what is the best practice in this type of scenario?

  Read the article

• How do I troubleshoot a problem syncing Google contacts to an iPad?

  - by Daryl Spitzer

  I use my MacBook Pro to sync content onto my wife's iPad. (She doesn't have a computer.) She doesn't want all my contacts from the Address Book app on my MBP. But she does want her Google contacts on her iPad. I've tried the following settings in iTunes: I created a group in my address book called "Claire's" (and put just a couple contacts in it), since if one enables "Sync Address Book Contacts" one either has to select "All" or at least one group. I've double-checked her email address in the dialog that comes up after pressing the "Configure" button. But after syncing, only the couple contacts in the "Claire's" group are in the Contacts app on her iPad. I've checked her Google contacts, and she has over 2000. For some reason they're not syncing. How do I find out why they're not? I looked to see if I could just use an app to do the sync on the iPad, but couldn't find one with good ratings. Do you have one to recommend so I can give up struggling with getting this working in iTunes?

  Read the article

• Problem with deploying django application on mod_wsgi

  - by Shehzad009

  Hello, I seem to have a problem deploying django with mod_wsgi. In the past I've used mod_python but I want to make the change. I have been using Graham Dumpleton notes here http://code.google.com/p/modwsgi/wiki/IntegrationWithDjango1, but it still seem to not work. I get a Internal Server Error. django.wsgi file: import os import sys sys.path.append('/var/www/html') sys.path.append('/var/www/html/c2duo_crm') os.environ['DJANGO_SETTINGS_MODULE'] = 'c2duo_crm.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() WSGIScriptAlias / /var/www/html/c2duo_crm/apache/django.wsgi Apache httpd file: <Directory /var/www/html/c2duo_crm/apache> Order allow,deny Allow from all </Directory> In my apache error log, it says I have this error This is not all of it, but I've got the most important part: [Errno 13] Permission denied: '/.python-eggs' [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] The Python egg cache directory is currently set to: [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] /.python-eggs [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] Perhaps your account does not have write access to this directory? You can [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] change the cache directory by setting the PYTHON_EGG_CACHE environment [Thu Mar 03 14:59:25 2011] [error] [client 127.0.0.1] variable to point to an accessible directory.

  Read the article

• Firefox not using Kerberos despite being configured to

  - by Nicolas Raoul

  I am deploying Linux/Firefox on a corporate Kerberos network. I followed this Kerberos-on-Firefox procedure but still Firefox does not connect via the company's Kerberos. I am using Firefox 3.0.18 on RedHat EL Server 5.5 Here is what I did: Run kinit on the command line to create a Kerberos ticket Check with klist: the ticket is valid until tomorrow, service principal is krbtgt/[email protected]. In Firefox, set network.negotiate-auth.trusted-uris and network.negotiate-auth.delegation-uris to .dc.thecompany.com. Load the company's portal page via its full hostname: http://server37.thecompany.com/alfresco. (note: server37 is actually the machine I am running Firefox on, but that should not be a problem I guess) PROBLEM: the company's intranet portal still serves me the login/password page. The same portal correctly uses Kerberos on Internet Explorer/Windows 7 machines, same settings, and shows the user's personal page. The server does not see any Kerberos request coming. Did I do something wrong? I enabled NSPR_LOG_MODULES=negotiateauth:5 as explained here, but the log file stays empty.

  Read the article

• pfSense router on a LAN with two gateways

  - by JohnCC

  I have a LAN with an ADSL modem/router on it. We have just gained an alternative high-speed internet connection at our location, and I want to connect the LAN to it, eventually dropping the ADSL. I've chosen to use a small PFSense box to connect the LAN to the new WAN connection. Two servers on the LAN run services accessible to the outside via NAT using the single ADSL WAN IP. We have DNS records which point to this IP. I want to do the same via the new connection, using the WAN IP there. That connection permits multiple IPs, so I have configured pfSense using virtual IP's, 1:1 NAT and appropriate firewall rules. When I change the servers' default gateway settings to the pfSense box, I can access the services via the new WAN IPs without a problem. However, I can no longer access them via the old WAN IP. If I set the servers' default gateway back to the ADSL router, then the opposite is true - I can access the services via the ADSL IP, but not via the new one. In the first case, I believe this is because an incoming SYN packet arrives at the ADSL WAN IP, and is NAT'd and sent to the internal IP of the server. The server responds with a SYN/ACK which it sends via its default gateway, the pfSense box. The pfSense box sees a SYN/ACK that it saw no SYN for and drops the packet. Is there any sensible way around this? I would like the services to be accessible via both IPs for a short period at least, since once I change the DNS it will take a while before everyone picks up the new address.

  Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >