Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 494/594 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

• Is there a realiable way to troubleshoot wake up from sleep in Windows?

  - by Borek

  Is there a reliable way to troubleshoot laptop wakes? I've seen "heuristics" posted here and there but isn't there really a simple and deterministic way to tell what's causing a problem? Specifically, my laptop wakes up about every hour for about 2 minutes. Exported event log entries are here: http://www.mediafire.com/?abcqb00v5wyo6pj. I've tried: powercfg -devicequery wake_armed Empty result set. Scheduled tasks - the main ones are not scheduled to run every hour. When go through a long list of all possible tasks, there are some that are set to be triggered every hour (e.g., MS "RacTask" whatever it is). But when I go to power options, Advanced settings, Sleep, Allow wake timers it is set to "Disable". Also, the specific task is not set to wake the computer if necessary. Power options for my Ethernet card don't enable it to wake the computer - the cable is disconnected anyway. There are no other HW devices attached - no USB disks, no keyboards / mice etc. I am really clueless and quite unhappy that it's so hard to troubleshoot this situation.

  Read the article

• SharePoint, Exchange and Incoming Emails Without Directory Management Services

  - by Nariman

  Trying to keep this as simple as possible. We've already created the email accounts that we need (e.g. account[1-20]@domain.com) on Exchange/AD. We'd like to now enable incoming emails on SharePoint 2007 lists corresponding to these accounts. My thinking is we don’t need to configure Directory Management Services [2] – the architecture will be simpler without it and the application doesn’t require these services. However, we still need to route messages from Exchange to either local SMTP services (via the connector described in the articles below) or by user-specific drop-folder settings (if permitted by Exchange). So the question is: can we instruct Exchange to use a drop folder just for accounts account[1-20]@domain.com? or do we need to change the accounts to account[1-20]@sharepointsmtp.domain.com and re-route those message to the local SMTP service that will drop them on disk? I've read the material below. [1] - http://www.combined-knowledge.com/Downloads/2007/How%20to%20configure%20Email%20Enabled%20Lists%20in%20Moss2007%20RTM%20using%20Exchange%202007.pdf http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/91e0c3d2-afe6-469d-b1bc-6ae7a9aa287e http://gj80blogtech.blogspot.com/2009/12/configure-incoming-email-setting-in.html http://www.jasonslater.co.uk/2007/08/10/configuring-incoming-mail-on-moss-2007-and-exchange-2007/ http://technet.microsoft.com/en-us/library/cc262947%28office.12%29.aspx http://technet.microsoft.com/en-us/library/cc263260%28office.12%29.aspx [2] – http://graycloud.com/sharepoint/incoming-mail-configuration-what-permissions-are-require-t39483.html

  Read the article

• How to replicate a windows servers (IIS,Files,ConfigurationState)?

  - by Geo

  Maybe a better question is: What is the closest competitor for DoubleTake? I am looking to replicate a windows production server in case it fails have a immediate backup. Any idead? NOTE 1: I forget to add that this server is on the EC2 Amazon Cloud. NOTE 2: The main situation we have is recreating the configuration settings like IIS, FTP Server, SQL Server, SVN Server. NOTE 3: So far I have been giving three options as answers for my original question: AppAssurance -- After talking to their sales team they do not support Amazon as cloud provider. Basically there is a technical need to be able to reboot from a disk or similar media. So ESX Virtual machine environment will work, but not the EC2. Acronis -- which works as a backup in ghost style. This will work for other type of scenarios. Use the Amazon EC2 API -- This option is ideal, but only works if you are developing a cloud application rather than hosting a regular application in a cloud scenario. This means that I am still looking for the answer. Any other ideas.

  Read the article

• Apache going straight to 100% mem usage on localhost

  - by Dennis Pedrie

  Hi, I'm running XAMPP on a OS X testing server... I'm the only person sending requests to the server. I've never messed with Apache config before, so I'm kinda without a paddle here. When I start Apache, I get ~10 httpd processes started, and 95% idle CPU. When I request a WordPress page, the CPU usage goes to 50%, and the page loads in about five seconds. It seems like once the page has finished loading, the CPU usage jumps to 100%, almost all of that httpd. A ton of processes get started, and they don't go away, and their CPU usage stays the same. I've changed the MaxRequestPerChild setting and so forth, but nothing seems to solve the problem. Even now, having not send any requests for about 15 minutes, the CPU usage is at 100%. Here's the applicable settings: Timeout 10 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 0 MaxSpareServers 2 MaxClients 20 MaxRequestsPerChild 50 </IfModule> I had always thought that once the request was made, Apache killed the process. Is there anything I can do to bring down the CPU usage, or is this just something I'll have to deal with? Thanks for helping out an Apache idiot.

  Read the article

• IIS6 Sending a 404 for ".exe" files.

  - by Tracker1

  Recently a bunch of files I had setup for download via IIS6's web server stopped working. They are a number of setup files ending in ".exe" and were working prior to a few months ago. I have the file permissions set properly, and even enabled browsing in IIS to determine that the paths are indeed correct. I'm not sure if it is related, but the directories with a period stopped working as well. ex: "~/download/ApplicationName/0.9/AppName-setup-0.9.123b2.exe" When I rename the directory to say 0_9 the browsing works, but the file itself delivers a 404 message from IIS. For now, I've setup FileZilla FTP for anonymous access to these files, but would prefer to continue using IIS. I've considered creating an HTTP handler to serve the .exe files, but would really prefer a configuration solution. I just can't figure out why it isn't working, as all the settings are correct. Directory is setup for read access. "Everyone" has read permissions on the files themselves, and the directory browsing (aside from the folder "0.9" to "0_9" rename) shows the files.

  Read the article

• Moving the Windows 7 Pro OEM image to computer with the same hardware

  - by SWin

  We bought 8 clean computers (even without HDD) with the same hardware and bought eight Windows 7 Pro OEM disks. Now I prepare one Win7 installation without activation but with all required programs, settings, etc. Then I'm going to clone the image to other computers even without sysprepping. I'm going to change the product key to legal number at COA sticker on each computer and make the activation through the Internet. Will this scenario work? I know that OEM's license agreement forbids the image cloning and the actions I'm going to do breaks the agreement. According the license agreement I should make the manual clean install of Win7 on each computer. But how Microsoft and other viewers can determine the cloning fact? All computers are the same and license Win7 DVDs are also the same. However in my case the installation time also will the same (and may be kind of installation code or something else) and this is not good. Will the Win7 activation work? Can I be sure that activation will not damage after some time? Can Microsoft determine the cloning fact during the activation process? Thank you.

  Read the article

• How do I restore a Windows Server 2008 R2 bare metal backup to a Windows Server 2012 R2 Hyper-V instance?

  - by Michael J. Gray

  I have been trying to find a simple way to migrate a physical Windows Server 2008 R2 installation over to a virtual machine hosted on Windows Server 2012 R2 Datacenter Edition /w Hyper-V. I came across the bare metal backup feature on Windows Server 2008 R2 and assumed I would be able to easily back it up and simply restore it into a new virtual machine by booting the installation media and getting into the Windows recovery process. When I attempted this, Hyper-V got into a network based restore process, but I do not have a PXE server or anything like that and I would rather not set it up. I tried mounting the VHD produced in the bare metal backup, just to see if it would somehow work, but it of course did not and failed with an error related to an incorrect boot device. I checked the virtual machine's BIOS settings and everything looked fine. I did not expect this to work anyway, so I stopped working through this method any further. Is there a way to take my bare metal backup and restore it into a virtual machine without a PXE server or SCVMM? I am opening to using proprietary tools but since the last time I did this I used Norton Ghost, which is no longer supported, I figured I would try doing it with what is readily available.

  Read the article

• Trying to limit IMAP folders/mailboxes my iPhone/iPad sees

  - by QuantumMechanic

  (Note: I am using dovecot 1.0.10 on Ubuntu 8.04.4 LTS. Yes, I know I need to upgrade before next year :) (Note: The SMTP/IMAP server in question only serves my family, so there's only a very few users. Certainly what I propose below, even it it works, would be a logistical nightmare with any significant number of users). I have noticed (and have confirmed via google) that the iOS mail app is terrible in its handling of IMAP subscriptions, namespaces, etc. For example, my iPhone and iPad will see EVERYTHING (all mailboxes, folders, etc.), whereas clients like Thunderbird, alpine, etc. only see what I tell them to see. This makes it an incredible pain to move mail between mailboxes because I have to scroll through a gazillion things. The mail_location in dovecot.conf is: mail_location = mbox:%h/Mail/:INBOX=/var/mail/%u To get around this, I've been considering doing the following for user foo: Create a dovecot userdb with a foo-ios virtual user in it, whose UID is identical to that of the real (in /etc/passwd) foo user and with a homedir of /home/foo-ios. ln -s /var/mail/foo /var/mail/foo-ios mkdir -p /home/foo-ios/Mail cd /home/foo-ios/Mail ln -s /home/foo/Mail/mailbox-i-want-visible mailbox-i-want-visible Make symlinks for the rest of limited set of mailboxes/folders I want visible to the iOS mail app. chown -R foo:foo /home/foo-ios Change iOS mail app settings to log in as user foo-ios instead of user foo. Will this work or will there be some index/file corruption hell because there will be two sets of indexes (one set living in /home/foo/Mail/.imap and other set living in /home/foo-ios/Mail/.imap) indexing the same underlying mbox files? And I'd be more than happy to hear of a better way to do this with dovecot! (Or to hear that dovecot 2.x works better with iOS devices).

  Read the article

• Controlling clone access to multiple mercurial repos served via hgwebdir.cgi

  - by chrislawlor

  I'm trying to host multiple hg repositories to use for my clients. I need to control access to each repository individually - not just push access, but clone as well. I've got an .htaccess set which requires authentication globally: AuthUserFile /path/to/hgweb.passwd AuthGroupFile /dev/null AuthName "Chris Lawlor Client Mercurial Repositories" AuthType Basic <Limit GET POST PUT> Require valid-user </Limit> <FilesMatch "\.(htaccess|passwd|config|bak)$"> Order Allow,Deny Deny from all </FilesMatch> Then in each repository, I've got a .hg/hgrc file requiring a valid user [web] allow_push = <comma seperated user list> This almost does what I need. The problem is that I need to add ALL my clients to hgweb.passwd, which gives them clone access to ALL of the repositories. The only solution I can think of is to have another .htaccess and .passwd file in EACH repository. I don't really want to do that though, seems a little convoluted. I can already specify a list of authorized users for each repository in that repos' hgrc file with the allow_push setting. If only there were an allow_clone setting as well... All the documentation I've found for hgwebdir.cgi is incomplete. I've read: http://mercurial.selenic.com/wiki/HgWebDirStepByStep http://hgbook.red-bean.com/read/collaborating-with-other-people.html#sec:collab:cgi http://hgbook.red-bean.com/read/collaborating-with-other-people.html And others. I've yet to find a comprehensive list of hgrc settings. I guess this is as much an Apache question than a mercurial question. Unless I can find a better approach, I'll be going with a seperate .htaccess and .passwd file for each repo. This is a virtual host on Webfaction if it matters - set up roughly like this http://docs.webfaction.com/software/mercurial.html

  Read the article

• SharePoint Web Analytics not tracking usage for main application

  - by Chris W

  My SP 2010 setup is two separate applications - one for the main portal and one for MySite. Whilst WebAnalytics is tracking usage of MySite it's not showing any stats for the main Portal. The only thing it lists is the number of site collections but no page views etc. The WA service is clearly running to pick up data for MySite. In Configure web analytics and health data collection everything is ticked. I can't find any obvious settings that are different between the two applications. Where should I look to get usage tracking correctly? Edit: Having played with the date ranges I see that actually I've got no stats in the last 7 days for any site at all including MySite which has been working at some point previously. Edit: What does each service (WA Data Processing Service vs WA Web Services) do and where should they be active? At present they're both running on an App server but not on the WFEs (although they were running on WFEs previously). From what I can gather than only need to run on an App server but I find it strange that the only logged activity I see in the staging database relates to Central Admin URLs on the App server and nothing from the WFEs.

  Read the article

• Setting the default permissions for files uploaded via FTP to a directory

  - by Kerri

  Disclaimer: I'm just a web designer/coder, and server admin stuff is my weakest point of them all. So be easy on me (and very specific). I'm using a simple CMS (Unify) on a site, where part of the functionality is that the client can upload files to a specified directory (using FTP). The permissions for the upload directory are set to 755. But when files are uploaded through the interface, they are uploaded with permissions set to 640 (instead of 644), so site visitors cannot acces the files. When I emailed the CMS's support about this, they told me that it was a server setting, and I need to make sure that files uploaded through FTP are set to 644. Makes perfect sense, but I have no idea how to do this. Any help would be greatly appreciated. This site is a shared site hosted by Network Solutions (Unix), so my access options are limited. I can edit .htaccess files, and php.ini, but that's about all I have access to. It appears I can't even log on via shell. ETA: 11/11/2010 Thanks all. I was able to work around this problem by setting up the CMS's settings in a different way. I'd be interested in following up on Nick O'Niel's suggestions, because I think he's on the right track, but unfortunately I can't access the necessary files on this particular server. So, anyway, I'm leaving this open, since the original questions isn't exactly resolved. Unfortunately, I probably can't put a correct answer to the test, since the shared server in question has nearly all of its config files tightly locked down.

  Read the article

• How to create a static IP on Windows Server 2008 R2 so I can access the server remotely

  - by Aesir

  I have just purchased a HP Proliant N40L which I am intending to use as a NAS, learning tool and just in general something to mess around with. As a student via the Microsoft dreamspark program I can get a free copy of Windows Server 2008 R2 which I am using as the OS. So that I can remote to the box from outside of my local network and so that I can stream media from it to my PS3, I have read that I need to create a static IP for the server and use port forwarding to forward to this IP so I can remote in. Is this correct? I am not really sure how to do this and if I need to make these changes on my router configuration, on the OS or both. I am a novice when it comes to networking however most resources for Windows server 2008 R2 seem to assume a fair amount of experience already. I realise that using this particular OS may seem like overkill for what I currently wish to do with it (stream content to other devices and backup) but as I can get a copy for free it seems sensible. Edit: From reading answers posted I feel I should give more information. I have now tried to add a static IP address using my router configuration settings. I have used the getmac command to get the mac address of the server. My ISP is Virgin Media and I have gone to the LAN IP section and I have added an IP address to the DHCP Reservation Lease Info. I can now use remote desktop connection internally to remote to the server (so I am assuming assigning this IP has worked). How do I configure this on the OS as well? I am also unsure on how I would remote to this machine outside of my local network?

  Read the article

• Preventing DDOS/SYN attacks (as far as possible)

  - by Godius

  Recently my CENTOS machine has been under many attacks. I run MRTG and the TCP connections graph shoots up like crazy when an attack is going on. It results in the machine becoming inaccessible. My MRTG graph: mrtg graph This is my current /etc/sysctl.conf config # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 1 # Controls whether core dumps will append the PID to the core filename # Useful for debugging multi-threaded applications kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 # Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 net.ipv4.conf.all.rp_filter = 1 net.ipv4.tcp_syncookies = 1 net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.all.rp_filter = 1 net.ipv4.tcp_max_syn_backlog = 1280 Futher more in my Iptables file (/etc/sysconfig/iptables ) I only have this setup # Generated by iptables-save v1.3.5 on Mon Feb 14 07:07:31 2011 *filter :INPUT ACCEPT [1139630:287215872] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1222418:555508541] Together with the settings above, there are about 800 IP's blocked via the iptables file by lines like: -A INPUT -s 82.77.119.47 -j DROP These have all been added by my hoster, when Ive emailed them in the past about attacks. Im no expert, but im not sure if this is ideal. My question is, what are some good things to add to the iptables file and possibly other files which would make it harder for the attackers to attack my machine without closing out any non-attacking users. Thanks in advance!

  Read the article

• MacBook Pro and Backtrack 5R1 Configuration

  - by user119346

  I have a Macbook pro Quad core (2.2/8gb ram/750gb hdd). I have went through tons of forums on the Internet, but none of them seemed to be updated for the current Backtrack 5R1, or the question of getting it to correctly work on the MBP. Can anyone help? I don’t have a USB Dongle, and I want to be able to use the internal airport extreme wireless of the MBP to use BT 5R1. I have downloaded Backtrack 5R1 onto VMWare Fusion, and got it up and running, but to no avail. It keeps recognizing my card as a Ethernet connection. Kismac wont recognize the card either. So what I am asking for is this: The proper “download method.” for Backtrack 5R1 to my MacBook Pro. (YES I AM WILLING TO RE-DOWNLOAD BT 5R1). The Complete process from start to finish, UP TO DATE, from someone who has done this using an MBP Running Lion OSX. The proper tweaks, settings, or commands to get my airport extreme wireless card to work (it is BROADCOM 4331 I think). The wireless connection I need to use the tools on both Backtrack 5R1 and Kismac. I mainly need to test WEP cracking on my network for security. The difference between running BT 5R1 on VMWARE Fusion and running from downloading it directly to the MBP, if there is, How to download it directly to the MBP?

  Read the article

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

• Port 22 is not responding

  - by Emanuele Feliziani

  I'm trying to make the jump to VPS from shared hosting for better performances and greater flexibility, but am stuck with the fact that I can't access the machine via ssh. First of all, the machine is a CentOS 6.3 cPanel x64 with WHM 11.38.0. Sshd is running (it appears in the current running processes). Making a port scan I see that port 22 is not responding. Port 21 is, but I am not able to access the machine via ftp (I think it's a security measure, but I don't know where to disable/enable it). So, I'm stuck in WHM and have no way to access the configuration of the machine, neither via ssh nor with ftp/sftp. When trying to connect with ssh via Terminal I only get this: ssh: connect to host xx.xx.xxx.xxx port 22: Operation timed out I also tried to access with the hostname instead of the IP address and it's the same. There seem to be no firewall in WHM and I have whitelisted my home IP address to access ssh, though there were no restrictions in the first place. I have been wandering through all the settings and options in WHM for several hours now, but can't seem to find anything. Does anybody have a clue as to where I should start investigating? Update: Thanks everyone. It was in fact a matter of firewall. There was a firewall not controlled by the WHM software. I managed to crack into the console from the vps control panel (a terrible, terrible java app that barely took my keyboard input) and disabled the firewall altogether running service iptables stop so that I was able to access the console via ssh with the terminal. Now I will have to set up the firewall again because the command I ran looks like having completely wiped the iptables. Can you recommend any newby-friendly resource where I can learn how to go about this and what should I block? Or should I just go with something like this: http://configserver.com/cp/csf.html ? Thanks again to everyone who helped me out.

  Read the article

• Prevent SSL certificate being returned for a specific domain

  - by jezmck

  Apologies for a long question: We've taken on a new client whose web hosting was previously on their in-house server which still has their Exchange/Outlook email. We now host their domain (and many others) on our server. They're complaining that they're getting errors in Outlook. I don't understand the AutoDiscover stuff at the root of the problem, but believe that I just need to stop the SSL certificate on our server being returned when requested at a particular domain: Yes it is, the issue lies with "{newclient}.com" being pointed to your server IP and that server has Port 443 open with an SSL certificate associated to it. So when Outlook/ActiveSync use autodiscover to find the mailbox settings it find your SSL (because 443 is open) and flags it as an error. The solution is to close 443 so its not discovered, Autodiscover will then proceed to mail.{newclient}.com via the MX / ServiceRecords and discover the correct SSL. I'm new here and there was no hand-over, so I don't know whether other currently hosted sites need to accept SSL connections, though I suspect some will, or may in future. This is a live server, so I can't risk trying loads of options in case I take the server offline! I feel like I should be adding something like the following to vhosts.conf. <VirtualHost *:443> ServerName {newclient}.com ServerAlias www.{newclient}.com SSLEngine Off SSLCertificateFile {NONE} SSLCertificateKeyFile {NONE} </VirtualHost> Apologies for the fact that I don't know enough about this subject to be able to ask the question more clearly!

  Read the article

• Windows 8 Pro Homegroup Not Allowing Access to Shared Files

  - by Jack Herr

  I have two pc's and a laptop. With all three running Windows 7, homegroup worked perfectly, with all computers able to access the files on the others exactly as one would expect. I installed Windows 8 Pro, which I downloaded recently from the MSDN website, on the laptop. From the info on the MSDN website, I believe the version downloaded is the official release version, not a release candidate. The install preserved all settings, apps, and files. I cannot connect to the homegroup from the laptop. Well, not exactly. I joined the homegroup during the install, and later left and rejoined, that was advertised as being offered by one of the pc's (not sure why that one was picked and not the other or both). This homegroup appears in my "computer" folder in the file explorer, offering files from that pc. But it excludes documents (only the music, pix, videos, and playlists folders on the one computer appear). I can actually access those files from the laptop. But the Homegroup folder, which actually shows all the computers by account and computer name and includes documents from both computers, does not open those folders when clicked. The computers listed by name in the Network folder give me a login that doesn't work. It asks for a username and password, no combinations of which work. Further, the following error message appears before the login is even attempted: "The system cannot contact a domain controller to service the authentication request. Please try again later." The two windows 7 pc's continue to share all files, including documents, seemlessly. I can also get to the laptop shared files, which I shared during setup, from either pc. Any ideas?

  Read the article

• Windows Server 2012 Hyper-V very slow

  - by Matt Taylor

  I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

  Read the article

• PHP 5.4.9 Mysqli issue

  - by Vitaly

  On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

  Read the article

• Barriers to IPv6 deployment: addressing

  - by sysadmin1138

  There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

  Read the article

• VPN messes up DNS resolution

  - by user124114

  After connecting with the Kerio VPN client (OS X Leopard) to a server, the internet (~web browsing) stopped working for the client. After poking around, the issue seems to be bad DNS server (i.e., entering IPs directly works). After disconnecting from the VPN, the invalid DNS server disappears from scutil --dns and all's well again. Now, I don't understand why OS X on the client even changes the DNS settings -- internet should be routed through a different interface, through the default gateway, not through the VPN. Questions: By what mechanism does connecting the VPN client change the "default" DNS server? How can I stop the VPN client from changing routing/DNS rules? Where is this stuff stored/modified? Before VPN: $ scutil --dns DNS configuration resolver #1 nameserver[0] : 10.66.77.1 # <---- default gateway = home router; all good order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 ... VPN connected: $ scutil --dns DNS configuration resolver #1 nameserver[0] : 192.168.1.1 # <--- rubbish nameserver[1] : 192.168.2.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 ... The VPN doesn't appear among $ networksetup -listallnetworkservices.

  Read the article

• How to take screenshots of WPF applications in correct size and content

  - by Thomas W.

  I usually take screenshots of single windows via the built-in key combination Alt+Print. Unfortunately this does not work well for more and more applications - all of them are WPF applications. Usually the screen shots have at least one of the following properties: the screenshot is larger than expected and contains parts of the screen around the actual window the screenshot has the correct size but includes parts of other windows, e.g. the Windows task bar. Of course the task bar might be in front of the window, but taking screen shots of "normal" programs works fine. How do I take screenshots of WPF application which are correct in size and content? I'd like to avoid the extra effort of checking all the screenshots for correctness, reproducing the situation, taking them again in case of issues or repairing/faking them manually in any pixel manipulation program (e.g. Paint.NET). I observe this on Windows 7 x64 SP 1, all official updates installed, but it might apply to other Windows versions as well (not tested yet). .NET 4.5 is installed. The application itself might only need the built-in .NET 3.5.1. It's reproducible on a virtual machine with the same settings. Examples: Screenshot of an application running in maximized mode. The screen shot includes parts of the task bar. Screenshot of a progress dialog which is behind the task bar. The screenshot also includes the task bar, while it doesn't for non WPF applications.

  Read the article

• UAC being turned off every time Windows 7 starts

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. I never disable UAC, but obviously some process or virus (I'm not sure, only guessing) causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I really don't know what causes the problem. I have run a full scan on the computer for any probable virus activity, but TrendMicro OfficeScan said that no viruses have been found. Malwarebytes' Anti-malware could not find any malicious items either. There are no other strange incidents on the machine. Everthing works fine except this bizarre incident. How can I learn what process is trying to turn off UAC? What way should I follow to overcome this problem?

  Read the article

• Archive Manager, SQL 2005 and MaxTokenSize high CPU

  - by Tim Alexander

  So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

  Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >