Search Results

Search found 17749 results on 710 pages for 'connection pool'.

Page 496/710 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

• How to split audio into multiple channels from optical S/PDIF or 1/8"?

  - by Josh M.

  I have a motherboard which has an optical S/PDIF output or 1/8". I'd like to "split" that signal into the appropriate channels so that I can then connect that to the wires behind my car's headunit which, in turn, run to the amp. The factory Bose amp just takes a single connector with a million wires running out of it, so that's why I would need to separate the signal into separate channels. On the other end there are four RCA connectors: front left, front right, rear left, rear right. The sub-woofer signal does not require an additional connection. Edit: Revised to include S/PDIF or 1/8".

  Read the article

• Linux + IPTables + NAT = some http hosts unreachable.

  - by Daniel

  Hi. I've set up dead simple NAT: iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o ppp0 -j MASQUERADE Everything works almost ok. Almost. The problem I've expirienced is some hosts are not reachable by NAT clients, i.e. there's http://code.jquery.com/jquery-1.4.2.min.js - I can download it from server, but in case of NAT client download stalls on connection stage. I thought its FFs fault, but wget has the same issue. I didn't find any logs/messages that can shed some light on this situtation. Any ideas what's going on? Maybe some tricky thing in sysclt is causing this? P.S. 3/3 client boxes are expiriencing this issue. This is definitely server trouble.

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• Set up a GUI managed firewall for other machines?

  - by Azendale

  What ways are there of setting up a firewall for traffic routed for other machines whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• Cannot access any remote resource after connecting to Cisco VPN on Vista

  - by Deepak Singh Rawat

  I have installed Cisco vpn client version 5.0.07.0290 on Vista Business SP2. I am able to successfully connnect to the vpn. But after connecting I am not able to access any resource in the vpn (like database, other computers in the network etc.). I have tried the following without any success : Older versions of the client Other vpn clients like Shrewsoft : same issue as the cisco vpn client Disabled Internet Connection Sharing service Installed the client in the root administrator account Run the installer as administrator Run the vpngui and ipsecdialer in XP compatibility mode and as administrator I am not sure how to troubleshoot this issue. Can somebody please help me in troubleshooting this issue? P.S : I've Zonealarm firewall, can that be an issue?

  Read the article

• Why is Google Chrome making these weird requests?

  - by mackenir

  I noticed that now and again, Chrome will make three requests to weird hostnames that arent resolved. For example: HEAD http://gtblynlsos/ HTTP/1.1 Host: gtblynlsos Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.107 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en-US;q=0.8,en;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Other example weird hostnames: http://nxibbjklov/ http://moheksgryj/ Has anyone else seen this? Any ideas what's going on? I have all Chrome extensions disabled.

  Read the article

• Configure Ubuntu9.10 to see hardware of my laptop

  - by michael

  I have installed Ubuntu 9.10 on my laptop. But it can't see all the hardware of the laptop. I would like some help. my laptop has 8G (in Windows7), but Ubuntu only see 2.9G (I get this value from System Monitor under Resource tab my laptop can have 1600x900 resolution (it works in Windows7), but i can only set to 1280x800 in Ubunutu my wireless card does not work. But my wired connection works. Can you please help me in configuring my Ubuntu environment?

  Read the article

• Finding the shortest path through a digraph that visits all nodes

  - by Boluc Papuccuoglu

  I am trying to find the shortest possible path that visits every node through a graph (a node may be visited more than once, the solution may pick any node as the starting node.). The graph is directed, meaning that being able to travel from node A to node B does not mean one can travel from node B to node A. All distances between nodes are equal. I was able to code a brute force search that found a path of only 27 nodes when I had 27 nodes and each node had a connection to 2 or 1 other node. However, the actual problem that I am trying to solve consists of 256 nodes, with each node connecting to either 4 or 3 other nodes. The brute force algorithm that solved the 27 node graph can produce a 415 node solution (not optimal) within a few seconds, but using the processing power I have at my disposal takes about 6 hours to arrive at a 402 node solution. What approach should I use to arrive at a solution that I can be certain is the optimal one? For example, use an optimizer algorithm to shorten a non-optimal solution? Or somehow adopt a brute force search that discards paths that are not optimal? EDIT: (Copying a comment to an answer here to better clarify the question) To clarify, I am not saying that there is a Hamiltonian path and I need to find it, I am trying to find the shortest path in the 256 node graph that visits each node AT LEAST once. With the 27 node run, I was able to find a Hamiltonian path, which assured me that it was an optimal solution. I want to find a solution for the 256 node graph which is the shortest.

  Read the article

• Flash Media Server slow over SSL

  - by Antilogic

  We are using FMS to host a VoD site. We host FMS internally (we do not use a CDN). We recently installed an SSL certificate to alleviate connection issues for clients (they're networks either block or don't support RTMP), however we're noticing that when streaming in RTMPS connections are drastically slower (on the order of Mbps). I know SSL causes some amount of over head but both client and server show almost no signs of exertion. Speedtest.net and a locally hosted speed test confirm that bandwidth is not an issue. I'm really not a network guru, so I'm at a loss as to where to check next. Do any of you have an idea why streaming media would run so slow over SSL?

  Read the article

• [iptables] Why do 'iptables -A OUTPUT -j REJECT' at the end of the chain OUTPUT override the previous rules??

  - by Serge

  Those are my IPTABLES rules: iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -p udp --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p udp --dport 53 -j ACCEPT iptables -A OUTPUT -p tcp --dport 53 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --set --name DEFAULT --rsource iptables -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --update --seconds 180 --hitcount 4 --name DEFAULT --rsource -j DROP iptables -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT iptables -A OUTPUT -j REJECT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT Im using a remote ssh conetion to set them up, but after i set: iptables -A OUTPUT -j REJECT My connection get lost. I have read all the documentation for Iptables and i can figure out anything, the global Rejects for INPUT work well because i can access to the web page but i get a timeout for ssh. Any idea? Thanks

  Read the article

• Localized database for customers

  - by Jim

  The company I work for, has just moved to AWS - and currently they have one very large central database with the instance currently located in America. However, one of their clients has requested that all of their data is held in the EU. So creating an AWS instance in Ireland isn't a problem, the problem is the database and how to manage it. We were considering having another database that runs in the EU for European customers, and use a different primary key step, so that the primary keys will never conflict in case the two locations need to be merged in the future. The problem is, if we have a customer that uses our system in both America, and the EU we would have to create 2 accounts for that user, and reporting across both regions would not be possible as the connection time would be too high. Is there an alternative to set this up?

  Read the article

• Unable to access the server via SSH

  - by Rishee

  when I am trying to access the server through ssh it says: ssh: connect to host xx.yyy.zzz.x port 22: Connection refused and on the server in auth.log it shows following log entry: Address xx.yyy.zzz.x maps to xx.yyy.zzz.x.static-pune-vsnl.net.in, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT! I have created a user account for that user and it is also in enabled status. Requested info It is Ubuntu 11.10 It is configured as SSH Server using openssh-server I am trying to connect to this server using Putty from Windows 7 i.e. My Desktop I have also asked this on AskUbuntu: http://askubuntu.com/questions/118556/unable-to-access-the-server-via-ssh

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• Best way to split LAN computers on two WANs (not load balancing)

  - by lpfavreau

  What is the best way to split the computers of a LAN (about 50 computers) to go on two WANs, depending on the computers' IP address or computers' configuration (gateway). I'm not looking for load-balancing, I need to be able to route which computer uses which Internet connection. A solution would be to rewire the old office to split the two distinct groups that need to use two different Internet connections but I'm not sure it's worth it at the moment. I have a pfSense router configured with the LAN (DHCP), WAN1 and WAN2. I also have the IP addresses (and ability to configure) the next router on WAN1 and the one on WAN2. What would you suggest? Routing based on IP addresses ranges? Different gateways? VLANs would be difficult for the same reason as to why rewire is a bit complicated. Thanks!

  Read the article

• DSL-504T as dumb ADSL modem

  - by petebob796

  I am trying to setup an existing DSL-504T ADSL router to work as a dumb modem for a DIR-825 wifi router. I am assuming I should try and move as much of the control to the DIR-825 as possible. It's a PPPoA connection so I don't think I can use bridge mode. Does anyone have any guidance on this? Should I have 2 subnets? Should I set the DIR-825 as the DMZ on the DSL-504T? Do I need to keep NAT and firewall enabled on DSL-504T? Basically I have it working but want to know if I have set it up correctly as I really want the QoS to work on the DIR-825.

  Read the article

• How do I establish the network sharing to my WinXP server network drive from my Mac notebook?

  - by mobibob

  I have been able to connect to my WinXP server's shared drives by using Finder's Command-K to browse the network. Unfortunately, when the server gets rebooted, the connection drops and sometimes I cannot get reconnected. I have specified different protocols (afp / cifs / smb) and different login names (connect as...) with limited success. Once I find the right combination, I am good for a few weeks. Once, it seems as though I had to unshared and shared the drive to get it to work. Unfortunately, it is very frustrating, so I try multiple things at one time, so when I finally get to the success point -- I honestly don't know what worked. I followed Mac help, surfed for instructions, issues, etc., but nothing appears to be consistent. I would love for this thread to be the ultimate answer for all time! Can anyone help me? If my description or question need more detail, please ask away!

  Read the article

• Network: Incoming connections work, outgoing fails

  - by anirvan

  i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

  Read the article

• Nginx + PHP-FPM on Centos 6.5 gives me 502 Bad Gateway (fpm error: unable to read what child say: Bad file descriptor)

  - by Latheesan Kanes

  I am setting up a standard LEMP stack. My current setup is giving me the following error: 502 Bad Gateway This is what is currently installed on my server: Here's the configurations I've created/updated so far, can some one take a look at the following and see where the error might be? I've already checked my logs, there's nothing in there (http://i.imgur.com/iRq3ksb.png). And I saw the following in /var/log/php-fpm/error.log file. sidenote: both the nginx and php-fpm has been configured to run under a local account called www-data and the following folders exits on the server nginx.conf global nginx configuration user www-data; worker_processes 6; worker_rlimit_nofile 100000; error_log /var/log/nginx/error.log crit; pid /var/run/nginx.pid; events { worker_connections 2048; use epoll; multi_accept on; } http { include /etc/nginx/mime.types; default_type application/octet-stream; # cache informations about FDs, frequently accessed files can boost performance open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # to boost IO on HDD we can disable access logs access_log off; # copies data between one FD and other from within the kernel # faster then read() + write() sendfile on; # send headers in one peace, its better then sending them one by one tcp_nopush on; # don't buffer data sent, good for small data bursts in real time tcp_nodelay on; # server will close connection after this time keepalive_timeout 60; # number of requests client can make over keep-alive -- for testing keepalive_requests 100000; # allow the server to close connection on non responding client, this will free up memory reset_timedout_connection on; # request timed out -- default 60 client_body_timeout 60; # if client stop responding, free up memory -- default 60 send_timeout 60; # reduce the data that needs to be sent over network gzip on; gzip_min_length 10240; gzip_proxied expired no-cache no-store private auth; gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; gzip_disable "MSIE [1-6]\."; # Load vHosts include /etc/nginx/conf.d/*.conf; } conf.d/www.domain.com.conf my vhost entry ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } /etc/php-fpm.d/www-data.conf my php-fpm pool config ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } I've got a file in /home/www-data/public_html/index.php with the code <?php phpinfo(); ?> (file uploaded as user www-data).

  Read the article

• How can I share files from my Windows 7 machine to my friend's Ubuntu machine?

  - by ProfKaos

  I run a Windows 7 Pro SP1 laptop as my home machine, and my housemate runs an Ubuntu 12.04.1.05 desktop. We share a WLAN. I would like to make certain locations and files available for him to read and maybe write. How can I go about this? Bearing in mind I have very little recent experience with modern Linux, and Ubuntu in particular. My first idea is to share a Windows folder with my Ubuntu VM under VMWare Player, then his Ubuntu machine can connect to my Unbuntu VM, and the two can use whatever magic Ubuntu uses to achieve file sharing. This requires my Ubuntu VM to be always running though, and that may not always be possible. I have also heard that Samba may have a feature to help here, but I know nothing about that. How can I share my Windows files with my mate's Ubuntu machine, preferably with a 1 to 1 connection, i.e. rather not using shim VM's

  Read the article

• How to schedule time-of-day upgrades

  - by Richard

  Hello, I'm responsible for about 30 Ubuntu computers at a private K-8 school. We have only a 3Mbps internet connection serving the entire campus, and I would like to ensure that updates are done in the middle of the night - so that daytime tasks are not slowed down. I'm using Ubuntu 10.04, and have set all computers to download and install security updates via the update manager. I have also installed cron-apt, and modified the config file to stagger the start times of the upgrades from about 10pm to 4am local time. HOWEVER - this morning I arrived at the school at 7:30am and all the computers were busy downloading a large security based update. Needless to say, all internet activity was slowed to a crawl (for the next 2 hours), and the computer users were very very upset. This was the event I'm trying so hard to prevent. It seems that my scheme to ensure middle of the night downloads failed, and I'm not sure why. I've also tried some schemes using unattended-upgrades & crontab, but there always seemed to be something scheduling upgrades to occur in addition to the ones I try to force at middle of the night. Is there a sure fire way to absolutely positively guarantee that updates will occur only at one specific time? It would be nice if the update manager just had a drop down menu to specify a designated time. Thanks in advance for any help you can give me.

  Read the article

• Intermittent USB 3.0 access - How do I troubleshoot?

  - by Billy ONeal

  I've got a WD Passport hard disk with "superspeed" USB 3.0 support. When I use my USB 3.0 flash drive (this is a Lenovo X220 laptop), USB 3.0 consistently works. But when I use the passport drive, almost without fail the connection drops to USB 2.0. Touching the cable seems to immediately trigger the problem, but it seems to happen on its own though. I've got another cable on order right now... but is it likely the cable's the issue here? Is there anything else I can check?

  Read the article

• Install a i386 printer driver into an amd64 distribution or how can I find a good printer based on features?

  - by Yanick Rochon

  Hi, I just bought a Lexmark Interpret S408 all-in-one printer. The box said that it supported Ubuntu 8.04, but I told myself it should work with Lucid... well no. The only driver I have found is for i386 while I have a amd64 image installed; the architecture is incompatible. So, the quesiton is : Is it possible to install that driver anyway, somehow? Or do I need to take that printer back to the store and buy another one? If the latter is the only alternative, I need a printer that has wireless connection capability can do color printing is of good price (less than $200 CAD) Thank you for your answers, help, and tips. ** UPDATE ** The driver was given in the form of deb package (for Debian distributions) and I managed to extract the actual deb package driver out of the install program. I ran sudo dpkg -i --force-all lexmark-inkjet-09-driver-1.5-1.i386.deb and the driver installed, and I was able to print something out. But that pretty much ends there; I cannot access anymore of the printer settings, etc. (i.g. scanner, fax, wifi settings, etc.) I should suffice for now as I'm satisfied with the printer's features (and size, and prince), but if I could have a full-linux-supported printer like that one, I would return this one in exchange for the other.

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• debian hang on startup "starting the winbind daemon: winbind"

  - by Bajingan Keparat

  I took a copy of a VM running a debian, just so that I can play around with it. I spin up the copy, but didn't give it any network connection to avoid conflict with the original one. However, when I turn the VM on, it seems to freeze after this startup message Starting Sambe daemons:nmbd smbd Starting PostgreSQL 8.4 database server: main Starting the Winbind daemon: winbind how do i fix this? I never get to the prompt to login. This vm does have a mount point that connects to a windows share folder.

  Read the article

• Limit number of simultaneous connections squid makes to a single server

  - by Ben Voigt

  Note: I am asking about outbound concurrent connection limits, not inbound, which is sufficiently covered on existing questions Modern browsers typically open a large number of simultaneous connections, to take advantage of the fact that TCP fairly shares bandwidth between connections. Of course, this doesn't result in fair sharing between users, so some servers have started penalizing hosts which open too many connections. This limit can be configured client-side (e.g. IE MaxConnectionsPerServer, Firefox network.http.max-connections-per-server), but the method differs for each browser and version, and many users aren't competent to adjust it themselves. So we turn to a squid transparent HTTP proxy for central management of HTTP download. How can the number of simultaneous connections from squid to a remote webserver be limited, so the webserver doesn't perceive it as abuse of concurrent connections? Ideally the limit would be per source address. Squid should accept virtually unlimited concurrent requests from the client browser, and issue them sequentially to the remote server, only N at a time, delaying (but not dropping) the others.

  Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >