Search Results

Search found 47380 results on 1896 pages for 'class generation'.

Page 511/1896 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

• I’m a Phoenix… and I’m miffed

  - by Stan Spotts

  For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

  Read the article

• Logging connection strings

  If you some of the dynamic features of SSIS such as package configurations or property expressions then sometimes trying to work out were your connections are pointing can be a bit confusing. You will work out in the end but it can be useful to explicitly log this information so that when things go wrong you can just review the logs. You may wish to develop this idea further and encapsulate such logging into a custom task, but for now lets keep it simple and use the Script Task. The Script Task code below will raise an Information event showing the name and connection string for a connection. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Get the connection string, we need to know the name of the connection Dim connectionName As String = "My OLE-DB Connection" Dim connectionString As String = Dts.Connections(connectionName).ConnectionString ' Format the message and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connectionName, connectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Dts.TaskResult = Dts.Results.Success End Sub End Class Building on that example it is probably more flexible to log all connections in a package as shown in the next example. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Loop through all connections in the package For Each connection As ConnectionManager In Dts.Connections ' Get the connection string and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connection.Name, connection.ConnectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Next Dts.TaskResult = Dts.Results.Success End Sub End Class By using the Information event it makes it readily available in the designer, for example the Visual Studio Output window (Ctrl+Alt+O) or the package designer Execution Results tab, and also allows you to readily control the logging by choosing which events to log in the normal way. Now before somebody starts commenting that this is a security risk, I would like to highlight good practice for building connection managers. Firstly the Password property, or any other similar sensitive property is always defined as write-only, and secondly the connection string property only uses the public properties to assemble the connection string value when requested. In other words the connection string will never contain the password. I have seen a couple of cases where this is not true, but that was just bad development by third-parties, you won’t find anything like that in the box from Microsoft.   Whilst writing this code it made me wish that there was a custom log entry that you could just turn on that did this for you, but alas connection managers do not even seem to support custom events. It did however remind me of a very useful event that is often overlooked and fits rather well alongside connection string logging, the Execute SQL Task’s custom ExecuteSQLExecutingQuery event. To quote the help reference Custom Messages for Logging - Provides information about the execution phases of the SQL statement. Log entries are written when the task acquires connection to the database, when the task starts to prepare the SQL statement, and after the execution of the SQL statement is completed. The log entry for the prepare phase includes the SQL statement that the task uses. It is the last part that is so useful, how often have you used an expression to derive a SQL statement and you want to log that to make sure the correct SQL is being returned? You need to turn it one, by default no custom log events are captured, but I’ll refer you to a walkthrough on setting up the logging for ExecuteSQLExecutingQuery by Jamie.

  Read the article

• PetaPoco with parameterised stored procedure and Asp.Net MVC

  - by Jalpesh P. Vadgama

  I have been playing with Micro ORMs as this is very interesting things that are happening in developer communities and I already liked the concept of it. It’s tiny easy to use and can do performance tweaks. PetaPoco is also one of them I have written few blog post about this. In this blog post I have explained How we can use the PetaPoco with stored procedure which are having parameters.  I am going to use same Customer table which I have used in my previous posts. For those who have not read my previous post following is the link for that. Get started with ASP.NET MVC and PetaPoco PetaPoco with stored procedures Now our customer table is ready. So let’s Create a simple process which will fetch a single customer via CustomerId. Following is a code for that. CREATE PROCEDURE mysp_GetCustomer @CustomerId as INT AS SELECT * FROM [dbo].Customer where CustomerId=@CustomerId Now  we are ready with our stored procedures. Now lets create code in CustomerDB class to retrieve single customer like following. using System.Collections.Generic; namespace CodeSimplified.Models { public class CustomerDB { public IEnumerable<Customer> GetCustomers() { var databaseContext = new PetaPoco.Database("MyConnectionString"); databaseContext.EnableAutoSelect = false; return databaseContext.Query<Customer>("exec mysp_GetCustomers"); } public Customer GetCustomer(int customerId) { var databaseContext = new PetaPoco.Database("MyConnectionString"); databaseContext.EnableAutoSelect = false; var customer= databaseContext.SingleOrDefault<Customer>("exec mysp_GetCustomer @customerId",new {customerId}); return customer; } } } Here in above code you can see that I have created a new method call GetCustomer which is having customerId as parameter and then I have written to code to use stored procedure which we have created to fetch customer Information. Here I have set EnableAutoSelect=false because I don’t want to create Select statement automatically I want to use my stored procedure for that. Now Our Customer DB class is ready and now lets create a ActionResult Detail in our controller like following using System.Web.Mvc; namespace CodeSimplified.Controllers { public class HomeController : Controller { public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; return View(); } public ActionResult About() { return View(); } public ActionResult Customer() { var customerDb = new Models.CustomerDB(); return View(customerDb.GetCustomers()); } public ActionResult Details(int id) { var customerDb = new Models.CustomerDB(); return View(customerDb.GetCustomer(id)); } } } Now Let’s create view based on that ActionResult Details method like following. Now everything is ready let’s test it in browser. So lets first goto customer list like following. Now I am clicking on details for first customer and Let’s see how we can use the stored procedure with parameter to fetch the customer details and below is the output. So that’s it. It’s very easy. Hope you liked it. Stay tuned for more..Happy Programming

  Read the article

• ASP.NET Web API - Screencast series with downloadable sample code - Part 1

  - by Jon Galloway

  There's a lot of great ASP.NET Web API content on the ASP.NET website at http://asp.net/web-api. I mentioned my screencast series in original announcement post, but we've since added the sample code so I thought it was worth pointing the series out specifically. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. So - let's watch them together! Grab some popcorn and pay attention, because these are short. After each video, I'll talk about what I thought was important. I'm embedding the videos using HTML5 (MP4) with Silverlight fallback, but if something goes wrong or your browser / device / whatever doesn't support them, I'll include the link to where the videos are more professionally hosted on the ASP.NET site. Note also if you're following along with the samples that, since Part 1 just looks at the File / New Project step, the screencast part numbers are one ahead of the sample part numbers - so screencast 4 matches with sample code demo 3. Note: I started this as one long post for all 6 parts, but as it grew over 2000 words I figured it'd be better to break it up. Part 1: Your First Web API [Video and code on the ASP.NET site] This screencast starts with an overview of why you'd want to use ASP.NET Web API: Reach more clients (thinking beyond the browser to mobile clients, other applications, etc.) Scale (who doesn't love the cloud?!) Embrace HTTP (a focus on HTTP both on client and server really simplifies and focuses service interactions) Next, I start a new ASP.NET Web API application and show some of the basics of the ApiController. We don't write any new code in this first step, just look at the example controller that's created by File / New Project. using System; using System.Collections.Generic; using System.Linq; using System.Net.Http; using System.Web.Http; namespace NewProject_Mvc4BetaWebApi.Controllers { public class ValuesController : ApiController { // GET /api/values public IEnumerable<string> Get() { return new string[] { "value1", "value2" }; } // GET /api/values/5 public string Get(int id) { return "value"; } // POST /api/values public void Post(string value) { } // PUT /api/values/5 public void Put(int id, string value) { } // DELETE /api/values/5 public void Delete(int id) { } } } Finally, we walk through testing the output of this API controller using browser tools. There are several ways you can test API output, including Fiddler (as described by Scott Hanselman in this post) and built-in developer tools available in all modern browsers. For simplicity I used Internet Explorer 9 F12 developer tools, but you're of course welcome to use whatever you'd like. A few important things to note: This class derives from an ApiController base class, not the standard ASP.NET MVC Controller base class. They're similar in places where API's and HTML returning controller uses are similar, and different where API and HTML use differ. A good example of where those things are different is in the routing conventions. In an HTTP controller, there's no need for an "action" to be specified, since the HTTP verbs are the actions. We don't need to do anything to map verbs to actions; when a request comes in to /api/values/5 with the DELETE HTTP verb, it'll automatically be handled by the Delete method in an ApiController. The comments above the API methods show sample URL's and HTTP verbs, so we can test out the first two GET methods by browsing to the site in IE9, hitting F12 to bring up the tools, and entering /api/values in the URL: That sample action returns a list of values. To get just one value back, we'd browse to /values/5: That's it for Part 1. In Part 2 we'll look at getting data (beyond hardcoded strings) and start building out a sample application.

  Read the article

• New Communications Industry Data Model with "Factory Installed" Predictive Analytics using Oracle Da

  - by charlie.berger

  Oracle Introduces Oracle Communications Data Model to Provide Actionable Insight for Communications Service Providers   We've integrated pre-installed analytical methodologies with the new Oracle Communications Data Model to deliver automated, simple, yet powerful predictive analytics solutions for customers.  Churn, sentiment analysis, identifying customer segments - all things that can be anticipated and hence, preconcieved and implemented inside an applications.  Read on for more information! TM Forum Management World, Nice, France - 18 May 2010 News Facts To help communications service providers (CSPs) manage and analyze rapidly growing data volumes cost effectively, Oracle today introduced the Oracle Communications Data Model. With the Oracle Communications Data Model, CSPs can achieve rapid time to value by quickly implementing a standards-based enterprise data warehouse that features communications industry-specific reporting, analytics and data mining. The combination of the Oracle Communications Data Model, Oracle Exadata and the Oracle Business Intelligence (BI) Foundation represents the most comprehensive data warehouse and BI solution for the communications industry. Also announced today, Hong Kong Broadband Network enhanced their data warehouse system, going live on Oracle Communications Data Model in three months. The leading provider increased its subscriber base by 37 percent in six months and reduced customer churn to less than one percent. Product Details Oracle Communications Data Model provides industry-specific schema and embedded analytics that address key areas such as customer management, marketing segmentation, product development and network health. CSPs can efficiently capture and monitor critical data and transform it into actionable information to support development and delivery of next-generation services using: More than 1,300 industry-specific measurements and key performance indicators (KPIs) such as network reliability statistics, provisioning metrics and customer churn propensity. Embedded OLAP cubes for extremely fast dimensional analysis of business information. Embedded data mining models for sophisticated trending and predictive analysis. Support for multiple lines of business, such as cable, mobile, wireline and Internet, which can be easily extended to support future requirements. With Oracle Communications Data Model, CSPs can jump start the implementation of a communications data warehouse in line with communications-industry standards including the TM Forum Information Framework (SID), formerly known as the Shared Information Model. Oracle Communications Data Model is optimized for any Oracle Database 11g platform, including Oracle Exadata, which can improve call data record query performance by 10x or more. Supporting Quotes "Oracle Communications Data Model covers a wide range of business areas that are relevant to modern communications service providers and is a comprehensive solution - with its data model and pre-packaged templates including BI dashboards, KPIs, OLAP cubes and mining models. It helps us save a great deal of time in building and implementing a customized data warehouse and enables us to leverage the advanced analytics quickly and more effectively," said Yasuki Hayashi, executive manager, NTT Comware Corporation. "Data volumes will only continue to grow as communications service providers expand next-generation networks, deploy new services and adopt new business models. They will increasingly need efficient, reliable data warehouses to capture key insights on data such as customer value, network value and churn probability. With the Oracle Communications Data Model, Oracle has demonstrated its commitment to meeting these needs by delivering data warehouse tools designed to fill communications industry-specific needs," said Elisabeth Rainge, program director, Network Software, IDC. "The TM Forum Conformance Mark provides reassurance to customers seeking standards-based, and therefore, cost-effective and flexible solutions. TM Forum is extremely pleased to work with Oracle to certify its Oracle Communications Data Model solution. Upon successful completion, this certification will represent the broadest and most complete implementation of the TM Forum Information Framework to date, with more than 130 aggregate business entities," said Keith Willetts, chairman and chief executive officer, TM Forum. Supporting Resources Oracle Communications Oracle Communications Data Model Data Sheet Oracle Communications Data Model Podcast Oracle Data Warehousing Oracle Communications on YouTube Oracle Communications on Delicious Oracle Communications on Facebook Oracle Communications on Twitter Oracle Communications on LinkedIn Oracle Database on Twitter The Data Warehouse Insider Blog

  Read the article

• Creating an HttpHandler to handle request of your own extension

  - by Jalpesh P. Vadgama

  I have already posted about http handler in details before some time here. Now let’s create an http handler which will handle my custom extension. For that we need to create a http handlers class which will implement Ihttphandler. As we are implementing IHttpHandler we need to implement one method called process request and another one is isReusable property. The process request function will handle all the request of my custom extension. so Here is the code for my http handler class. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; namespace Experiement { public class MyExtensionHandler:IHttpHandler { public MyExtensionHandler() { //Implement intialization here } bool IHttpHandler.IsReusable { get { return true; } } void IHttpHandler.ProcessRequest(HttpContext context) { string excuttablepath = context.Request.AppRelativeCurrentExecutionFilePath; if (excuttablepath.Contains("HelloWorld.dotnetjalps")) { Page page = new HelloWorld(); page.AppRelativeVirtualPath = context.Request.AppRelativeCurrentExecutionFilePath; page.ProcessRequest(context); } } } } Here in above code you can see that in process request function I am getting current executable path and then I am processing that page. Now Lets create a page with extension .dotnetjalps and then we will process this page with above created http handler. so let’s create it. It will create a page like following. Now let’s write some thing in page load Event like following. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; namespace Experiement { public partial class HelloWorld : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello World"); } } } Now we have to tell our web server that we want to process request from this .dotnetjalps extension through our custom http handler for that we need to add a tag in httphandler sections of web.config like following. <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <httpHandlers> <add verb="*" path="*.dotnetjalps" type="Experiement.MyExtensionHandler,Experiement"/> </httpHandlers> </system.web> </configuration> That’s it now run that page into browser and it will execute like following in browser That’s you.. Isn’t it cool.. Stay tuned for more.. Happy programming.. Technorati Tags: HttpHandler,ASP.NET,Extension

  Read the article

• How to use caching to increase render performance?

  - by Christian Ivicevic

  First of all I am going to cover the basic design of my 2d tile-based engine written with SDL in C++, then I will point out what I am up to and where I need some hints. Concept of my engine My engine uses the concept of GameScreens which are stored on a stack in the main game class. The main methods of a screen are usually LoadContent, Render, Update and InitMultithreading. (I use the last one because I am using v8 as a JavaScript bridge to the engine. The main game loop then renders the top screen on the stack (if there is one; otherwise, it exits the game) - actually it calls the render methods, but stores all items to be rendered in a list. After gathering all this information the methods like SDL_BlitSurface are called by my GameUIRenderer which draws the enqueued content and then draws some overlay. The code looks like this: while(Game is running) { Handle input if(Screens on stack == 0) exit Update timer etc. Clear the screen Peek the screen on the stack and collect information on what to render Actually render the enqueue screen stuff and some overlay etc. Flip the screen } The GameUIRenderer uses as hinted a std::vector<std::shared_ptr<ImageToRender>> to hold all necessary information described by this class: class ImageToRender { private: SDL_Surface* image; int x, y, w, h, xOffset, yOffset; }; This bunch of attributes is usually needed if I have a texture atlas with all tiles in one SDL_Surface and then the engine should crop one specific area and draw this to the screen. The GameUIRenderer::Render() method then just iterates over all elements and renders them something like this: std::for_each( this->m_vImageVector.begin(), this->m_vImageVector.end(), [this](std::shared_ptr<ImageToRender> pCurrentImage) { SDL_Rect rc = { pCurrentImage->x, pCurrentImage->y, 0, 0 }; // For the sake of simplicity ignore offsets... SDL_Rect srcRect = { 0, 0, pCurrentImage->w, pCurrentImage->h }; SDL_BlitSurface(pCurrentImage->pImage, &srcRect, g_pFramework->GetScreen(), &rc); } ); this->m_vImageVector.clear(); Current ideas which need to be reviewed The specified approach works really good and IMHO it is really has a good structure, however the performance could be definitely increased. I would like to know what do you suggest, how to implement efficient caching of surfaces etc so that there is no need to redraw the same scene over and over again? The map itself would be almost static, only when the player moves, we would need to move the map. Furthermore animated entities would either require updates of the whole map or updates of only the specific areas the entities are currently moving in. My first approaches were to include a flag IsTainted which should be used by the GameUIRenderer to decide whether to redraw everything or use cached version (or to not render anything so that we do not have to Clear the screen and let the last frame persist). However this seems to be quite messy if I have to manually handle in my Render method of the screen class if something has changed or not.

  Read the article

• Auto-cancel reason not found (6, 13906)

  - by Rajesh Sharma

  There are many errors in the application which are never invoked because of appropriate application configuration done at the time of implementation by the solution architects. So typically, as an application end user you would never stumble upon such errors. But what if the application administrator inadvertently changes the configuration/setup in the development, test, QA, or production environment? This is the time when you as an end user are introduced to a brand-new error for which you may not have a clue or understanding to what it means and neither the access/privilege to rectify it.    In this post we'll focus on one such error '6, 13906 - Auto-cancel reason not found'.   You get this error if you have not defined a Bill (Segment) Cancel Reason (Admin Menu, B, Bill Cancel Reason) code with System Default value of Turn off auto-cancel.   Consider a scenario when you are about to final bill an 'Account' for which the bill period's cut-off date you selected is falling on or after the Service Agreement's (SA) end/stop date (basically SA is Stopped with a date earlier than it was billed previously). And for the same 'Account' either: Bill segments exists that end after the SA's end date OR Non-closing bill segments exists that end on the SA's end date (OR closing bill segments that do not end on SA's end date or do not exist at all - remember closing/final bill segment is generated if the SA is in Stopped status).   CC&B detects such scenario and attempts to cancel all such violating bill segments automatically, but NOT if you are generating the bill Online. If online, the system assumes that you know what you are doing, and prompts you with error 2, 13716 - Bill segments that violate the SA (%1) End Date (%2) exist to take necessary action.   If in batch, system automatically cancels these kinds of bill segment(s).   Since this happens in the background, you have to define within the application which System Default Bill (Segment) cancellation reason code identified as Turn off auto-cancel, should be used by the process when it attempts to cancel any such violating bill segments (You already know that you cannot cancel a bill segment without giving a reason for cancellation).   So what exactly happens during batch billing?   Bill Segment generation routine at first determines billing eligibility of the service agreement being billed. One of the billing eligibility criteria is to check the SA's previous bill segments which have end dates greater than the current cut-off date/end date. Technically, the routine retrieves a count of such violating bill segments.     SELECT COUNT (*) FROM CI_BSEG WHERE SA_ID = :SA-ID AND BSEG_STAT_FLG = '50' -- Frozen AND END_DT IS NOT NULL AND (END_DT > '03-JUN-2010' -- Bill segment greater than SA's End Date OR OR (END_DT = '03-JUN-2010' AND CLOSING_BSEG_SW = 'N')) -- Non-closing bill segment ending on SA's end date   If the count is greater than zero, Bill segment generation routine executes another program to auto-cancel such bill segments. Auto-cancel program retrieves the 'Bill Cancel Reason' code which is identified as Turn off auto-cancel. Retrieved cancel reason code is then placed on the bill segments that are being cancelled automatically.   During this process if the routine fails to determine the bill cancel reason code having System Default Turn off auto-cancel because it was not been configured, you get a bill exception 6, 13906 - Auto-cancel reason not found.   Also note that duplicate or multiple System Default codes identified as Turn off auto-cancel are not allowed. CC&B would complain with an error 2, 54201.   Duplicate validation/check is also performed within Auto-cancel routine, if suppose for test purposes you executed a DML statement updating CI_BILL_CAN_RSN.BSCAN_SYS_DFLT_FLG with a value 'T'.

  Read the article

• Implicit and Explicit implementations for Multiple Interface inheritance

  Following C#.NET demo explains you all the scenarios for implementation of Interface methods to classes. There are two ways you can implement a interface method to a class. 1. Implicit Implementation 2. Explicit Implementation. Please go though the sample. using System;   namespace ImpExpTest { class Program { static void Main(string[] args) { C o3 = new C(); Console.WriteLine(o3.fu());   I1 o1 = new C(); Console.WriteLine(o1.fu());   I2 o2 = new C(); Console.WriteLine(o2.fu());   var o4 = new C(); //var is considered as C Console.WriteLine(o4.fu());   var o5 = (I1)new C(); //var is considered as I1 Console.WriteLine(o5.fu());   var o6 = (I2)new C(); //var is considered as I2 Console.WriteLine(o6.fu());   D o7 = new D(); Console.WriteLine(o7.fu());   I1 o8 = new D(); Console.WriteLine(o8.fu());   I2 o9 = new D(); Console.WriteLine(o9.fu()); } }   interface I1 { string fu(); }   interface I2 { string fu(); }   class C : I1, I2 { #region Imicitly Defined I1 Members public string fu() { return "Hello C"; } #endregion Imicitly Defined I1 Members   #region Explicitly Defined I1 Members   string I1.fu() { return "Hello from I1"; }   #endregion Explicitly Defined I1 Members   #region Explicitly Defined I2 Members   string I2.fu() { return "Hello from I2"; }   #endregion Explicitly Defined I2 Members }   class D : C { #region Imicitly Defined I1 Members public string fu() { return "Hello from D"; } #endregion Imicitly Defined I1 Members } }.csharpcode, .csharpcode pre{ font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/}.csharpcode pre { margin: 0em; }.csharpcode .rem { color: #008000; }.csharpcode .kwrd { color: #0000ff; }.csharpcode .str { color: #006080; }.csharpcode .op { color: #0000c0; }.csharpcode .preproc { color: #cc6633; }.csharpcode .asp { background-color: #ffff00; }.csharpcode .html { color: #800000; }.csharpcode .attr { color: #ff0000; }.csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em;}.csharpcode .lnum { color: #606060; }Output:-Hello C Hello from I1 Hello from I2 Hello C Hello from I1 Hello from I2 Hello from D Hello from I1 Hello from I2 span.fullpost {display:none;}

  Read the article

• Iron Speed Designer 7.0 - the great gets greater!

  - by GGBlogger

  For Immediate Release Iron Speed, Inc. Kelly Fisher +1 (408) 228-3436 [email protected] http://www.ironspeed.com       Iron Speed Version 7.0 Generates SharePoint Applications New! Support for Microsoft SharePoint speeds application generation and deployment   San Jose, CA – June 8, 2010. Software development tools-maker Iron Speed, Inc. released Iron Speed Designer Version 7.0, the latest version of its popular Web 2.0 application generator. Iron Speed Designer generates rich, interactive database and reporting applications for .NET, Microsoft SharePoint and the Cloud.    In addition to .NET applications, Iron Speed Designer V7.0 generates database-driven SharePoint applications. The ability to quickly create database-driven applications for SharePoint eliminates a lot of work, helping IT departments generate productivity-enhancing applications in just a few hours.  Generated applications include integrated SharePoint application security and use SharePoint master pages.    “It’s virtually impossible to build database-driven application in SharePoint by hand. Iron Speed Designer V7.0 not only makes this possible, the tool makes it easy.” – Razi Mohiuddin, President, Iron Speed, Inc.     Integrated SharePoint application security Generated applications include integrated SharePoint application security. SharePoint sites and their groups are used to retrieve security roles. Iron Speed Designer validates the user against a Microsoft SharePoint server on your network by retrieving the logged in user’s credentials from the SharePoint Context.    “The Iron Speed Designer generated application integrates seamlessly with SharePoint security, removing the hassle of designing, testing and approving your own security layer.” -Michael Landi, Solutions Architect, Light Speed Solutions     SharePoint Solution Packages Iron Speed Designer V7.0 creates SharePoint Solution Packages (WSPs) for easy application deployment. Using the Deployment Wizard, a single application WSP is created and can be deployed to your SharePoint server.   “Iron Speed Designer is the first product on the market that allows easy and painless deployment of database-driven .NET web applications inside the SharePoint environment.” -Bryan Patrick, Developer, Pseudo Consulting     SharePoint master pages and themes In V7.0, generated applications use SharePoint master pages and contain the same content as other SharePoint pages. Generated applications use the current SharePoint color scheme and display standard SharePoint navigation controls on each page.   “Iron Speed Designer preserves the look and feel of the SharePoint environment in deployed database applications without additional hand-coding.” -Kirill Dmitriev, Software Developer, Iron Speed, Inc.     Iron Speed Designer Version 7.0 System Requirements Iron Speed Designer Version 7.0 runs on Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003 and 2008. It generates .NET Web applications for Microsoft SQL Server, Oracle, Microsoft Access and MySQL. These applications may be deployed on any machine running the .NET Framework. Iron Speed Designer supports Microsoft SharePoint 2007 and Windows SharePoint Services (WSS3). Find complete information about Iron Speed Designer Version 7.0 at www.ironspeed.com.     About Iron Speed, Inc. Iron Speed is the leader in enterprise-class application generation. Our software development tools generate database and reporting applications in significantly less time and cost than hand-coding. Our flagship product, Iron Speed Designer, is the fastest way to deliver applications for the Microsoft .NET and software-as-a-service cloud computing environments.   With products built on decades of experience in enterprise application development and large-scale e-commerce systems, Iron Speed products eliminate the need for developers to choose between "full featured" and "on schedule."   Founded in 1999, Iron Speed is well funded with a capital base of over $20M and strategic investors that include Arrow Electronics and Avnet, as well as executives from AMD, Excelan, Onsale, and Oracle. The company is based in San Jose, Calif., and is located online at www.ironspeed.com.

  Read the article

• Bluetooth not found on BCM43228

  - by TK Kocheran

  I've got a Broadcom BCM43228 mPCIe card which came with my motherboard (ASUS ROG Maximus V Extreme, can't seem to find a link to what the card is) which is working great for WiFi right now, but I can't detect the Bluetooth hardware onboard. In Windows, I have full Bluetooth 4.0 support. $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.6 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 7 (rev c4) 00:1c.7 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 8 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1189 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 0e0a (rev a1) 0d:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 10:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 12:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n 17:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) The key line seems to be: 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n If I try to detect the Bluetooth card, I don't see anything: $ hcitool dev Devices: rfkill list all: Output lspci: Output lsusb: Output I finally found the card with usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17b5 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=############ C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) I've heard that this card needs to have firmware injected into it in order to function. If that's the case, how do I do it?

  Read the article

• Hidden exceptions

  - by user12617285

  Occasionally you may find yourself in a Java application environment where exceptions in your code are being caught by the application framework and either silently swallowed or converted into a generic exception. Either way, the potentially useful details of your original exception are inaccessible. Wouldn't it be nice if there was a VM option that showed the stack trace for every exception thrown, whether or not it's caught? In fact, HotSpot includes such an option: -XX:+TraceExceptions. However, this option is only available in a debug build of HotSpot (search globals.hpp for TraceExceptions). And based on a quick skim of the HotSpot source code, this option only prints the exception class and message. A more useful capability would be to have the complete stack trace printed as well as the code location catching the exception. This is what the various TraceException* options in in Maxine do (and more). That said, there is a way to achieve a limited version of the same thing with a stock standard JVM. It involves the use of the -Xbootclasspath/p non-standard option. The trick is to modify the source of java.lang.Exception by inserting the following: private static final boolean logging = System.getProperty("TraceExceptions") != null; private void log() { if (logging && sun.misc.VM.isBooted()) { printStackTrace(); } } Then every constructor simply needs to be modified to call log() just before returning: public Exception(String message) { super(message); log(); } public Exception(String message, Throwable cause) { super(message, cause); log(); } // etc... You now need to compile the modified Exception.java source and prepend the resulting class to the boot class path as well as add -DTraceExceptions to your java command line. Here's a console session showing these steps: % mkdir boot % javac -d boot Exception.java % java -DTraceExceptions -Xbootclasspath/p:boot -cp com.oracle.max.vm/bin test.output.HelloWorld java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.(ZipFile.java:127) at java.util.jar.JarFile.(JarFile.java:135) at java.util.jar.JarFile.(JarFile.java:72) at sun.misc.URLClassPath$JarLoader.getJarFile(URLClassPath.java:646) at sun.misc.URLClassPath$JarLoader.access$600(URLClassPath.java:540) at sun.misc.URLClassPath$JarLoader$1.run(URLClassPath.java:607) at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath$JarLoader.ensureOpen(URLClassPath.java:599) at sun.misc.URLClassPath$JarLoader.(URLClassPath.java:583) at sun.misc.URLClassPath$3.run(URLClassPath.java:333) at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath.getLoader(URLClassPath.java:322) at sun.misc.URLClassPath.getLoader(URLClassPath.java:299) at sun.misc.URLClassPath.getResource(URLClassPath.java:168) at java.net.URLClassLoader$1.run(URLClassLoader.java:194) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:295) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) java.security.PrivilegedActionException at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath$JarLoader.ensureOpen(URLClassPath.java:599) at sun.misc.URLClassPath$JarLoader.(URLClassPath.java:583) at sun.misc.URLClassPath$3.run(URLClassPath.java:333) at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath.getLoader(URLClassPath.java:322) ... It's worth pointing out that this is not as useful as direct VM support for tracing exceptions. It has (at least) the following limitations: The trace is shown for every exception, whether it is thrown or not. It only applies to subclasses of java.lang.Exception as there appears to be bootstrap issues when the modification is applied to Throwable.java. It does not show you where the exception was caught. It involves overriding a class in rt.jar, something should never be done in a non-development environment.

  Read the article

• Implementing a modern web application with Web API on top of old services

  - by Gaui

  My company has many WCF services which may or may not be replaced in the near future. The old web application is written in WebForms and communicates straight with these services via SOAP and returns DataTables. Now I am designing a new modern web application in a modern style, an AngularJS client which communicates with an ASP.NET Web API via JSON. The Web API then communicates with the WCF services via SOAP. In the future I want to let the Web API handle all requests and go straight to the database, but because the business logic implemented in the WCF services is complicated it's going to take some time to rewrite and replace it. Now to the problem: I'm trying to make it easy in the near future to replace the WCF services with some other data storage, e.g. another endpoint, database or whatever. I also want to make it easy to unit test the business logic. That's why I have structured the Web API with a repository layer and a service layer. The repository layer has a straight communication with the data storage (WCF service, database, or whatever) and the service layer then uses the repository (Dependency Injection) to get the data. It doesn't care where it gets the data from. Later on I can be in control and structure the data returned from the data storage (DataTable to POCO) and be able to test the logic in the service layer with some mock repository (using Dependency Injection). Below is some code to explain where I'm going with this. But my question is, does this all make sense? Am I making this overly complicated and could this be simplified in any way possible? Does this simplicity make this too complicated to maintain? My main goal is to make it as easy as possible to switch to another data storage later on, e.g. an ORM and be able to test the logic in the service layer. And because the majority of the business logic is implemented in these WCF services (and they return DataTables), I want to be in control of the data and the structure returned to the client. Any advice is greatly appreciated. Update 20/08/14 I created a repository factory, so services would all share repositories. Now it's easy to mock a repository, add it to the factory and create a provider using that factory. Any advice is much appreciated. I want to know if I'm making things more complicated than they should be. So it looks like this: 1. Repository Factory public class RepositoryFactory { private Dictionary<Type, IServiceRepository> repositories; public RepositoryFactory() { this.repositories = new Dictionary<Type, IServiceRepository>(); } public void AddRepository<T>(IServiceRepository repo) where T : class { if (this.repositories.ContainsKey(typeof(T))) { this.repositories.Remove(typeof(T)); } this.repositories.Add(typeof(T), repo); } public dynamic GetRepository<T>() { if (this.repositories.ContainsKey(typeof(T))) { return this.repositories[typeof(T)]; } throw new RepositoryNotFoundException("No repository found for " + typeof(T).Name); } } I'm not very fond of dynamic but I don't know how to retrieve that repository otherwise. 2. Repository and service // Service repository interface // All repository interfaces extend this public interface IServiceRepository { } // Invoice repository interface // Makes it easy to mock the repository later on public interface IInvoiceServiceRepository : IServiceRepository { List<Invoice> GetInvoices(); } // Invoice repository // Connects to some data storage to retrieve invoices public class InvoiceServiceRepository : IInvoiceServiceRepository { public List<Invoice> GetInvoices() { // Get the invoices from somewhere // This could be a WCF, a database, or whatever using(InvoiceServiceClient proxy = new InvoiceServiceClient()) { return proxy.GetInvoices(); } } } // Invoice service // Service that handles talking to a real or a mock repository public class InvoiceService { // Repository factory RepositoryFactory repoFactory; // Default constructor // Default connects to the real repository public InvoiceService(RepositoryFactory repo) { repoFactory = repo; } // Service function that gets all invoices from some repository (mock or real) public List<Invoice> GetInvoices() { // Query the repository return repoFactory.GetRepository<IInvoiceServiceRepository>().GetInvoices(); } }

  Read the article

• Multidimensional Thinking–24 Hours of Pass: Celebrating Women in Technology

  - by smisner

  It’s Day 1 of #24HOP and it’s been great to participate in this event with so many women from all over the world in one long training-fest. The SQL community has been abuzz on Twitter with running commentary which is fun to watch while listening to the current speaker. If you missed the fun today because you’re busy with all that work you’ve got to do – don’t despair. All sessions are recorded and will be available soon. Keep an eye on the 24 Hours of Pass page for details. And the fun’s not over today. Rather than run 24 hours consecutively, #24HOP is now broken down into 12-hours over two days, so check out the schedule to see if there’s a session that interests you and fits your schedule. I’m pleased to announce that my business colleague Erika Bakse ( Blog | Twitter) will be presenting on Day 2 – her debut presentation for a PASS event. (And I’m also pleased to say she’s my daughter!) Multidimensional Thinking: The Presentation My contribution to this lineup of terrific speakers was Multidimensional Thinking. Here’s the abstract: “Whether you’re developing Analysis Services cubes or creating PowerPivot workbooks, you need to get into a multidimensional frame of mind to produce a model that best enables users to answer their business questions on their own. Many database professionals struggle initially with multidimensional models because the data modeling process is much different than the one they use to produce traditional, third normal form databases. In this session, I’ll introduce you to the terminology of multidimensional modeling and step through the process of translating business requirements into a viable model.” If you watched the presentation and want a copy of the slides, you can download a copy here. And you’re welcome to download the slides even if you didn’t watch the presentation, but they’ll make more sense if you did! Kimball All the Way There’s only so much I can cover in the time allotted, but I hope that I succeeded in my attempt to build a foundation that prepares you for starting out in business intelligence. One of my favorite resources that will get into much more detail about all kinds of scenarios (well beyond the basics!) is The Data Warehouse Toolkit (Second Edition) by Ralph Kimball. Anything from Kimball or the Kimball Group is worth reading. Kimball material might take reading and re-reading a few times before it makes sense. From my own experience, I found that I actually had to just build my first data warehouse using dimensional modeling on faith that I was going the right direction because it just didn’t click with me initially. I’ve had years of practice since then and I can say it does get easier with practice. The most important thing, in my opinion, is that you simply must prototype a lot and solicit user feedback, because ultimately the model needs to make sense to them. They will definitely make sure you get it right! Schema Generation One question came up after the presentation about whether we use SQL Server Management Studio or Business Intelligence Development Studio (BIDS) to build the tables for the dimensional model. My answer? It really doesn’t matter how you create the tables. Use whatever method that you’re comfortable with. But just so happens that it IS possible to set up your design in BIDS as part of an Analysis Services project and to have BIDS generate the relational schema for you. I did a Webcast last year called Building a Data Mart with Integration Services that demonstrated how to do this. Yes, the subject was Integration Services, but as part of that presentation, I showed how to leverage Analysis Services to build the tables, and then I showed how to use Integration Services to load those tables. I blogged about this presentation in September 2010 and included downloads of the project that I used. In the blog post, I explained that I missed a step in the demonstration. Oops. Just as an FYI, there were two more Webcasts to finish the story begun with the data – Accelerating Answers with Analysis Services and Delivering Information with Reporting Services. If you want to just cut to the chase and learn how to use Analysis Services to build the tables, you can see the Using the Schema Generation Wizard topic in Books Online.

  Read the article

• Rules and advice for logging?

  - by Nick Rosencrantz

  In my organization we've put together some rules / guildelines about logging that I would like to know if you can add to or comment. We use Java but you may comment in general about loggin - rules and advice Use the correct logging level ERROR: Something has gone very wrong and need fixing immediately WARNING: The process can continue without fixing. The application should tolerate this level but the warning should always get investigated. INFO: Information that an important process is finished DEBUG. Is only used during development Make sure that you know what you're logging. Avoid that the logging influences the behavior of the application The function of the logging should be to write messages in the log. Log messages should be descriptive, clear, short and concise. There is not much use of a nonsense message when troubleshooting. Put the right properties in log4j Put in that the right method and class is written automatically. Example: Datedfile -web log4j.rootLogger=ERROR, DATEDFILE log4j.logger.org.springframework=INFO log4j.logger.waffle=ERROR log4j.logger.se.prv=INFO log4j.logger.se.prv.common.mvc=INFO log4j.logger.se.prv.omklassning=DEBUG log4j.appender.DATEDFILE=biz.minaret.log4j.DatedFileAppender log4j.appender.DATEDFILE.layout=org.apache.log4j.PatternLayout log4j.appender.DATEDFILE.layout.ConversionPattern=%d{HH:mm:ss,SSS} %-5p [%C{1}.%M] - %m%n log4j.appender.DATEDFILE.Prefix=omklassning. log4j.appender.DATEDFILE.Suffix=.log log4j.appender.DATEDFILE.Directory=//localhost/WebSphereLog/omklassning/ Log value. Please log values from the application. Log prefix. State which part of the application it is that the logging is written from, preferably with something for the project agreed prefix e.g. PANDORA_DB The amount of text. Be careful so that there is not too much logging text. It can influence the performance of the app. Loggning format: -There are several variants and methods to use with log4j but we would like a uniform use of the following format, when we log at exceptions: logger.error("PANDORA_DB2: Fel vid hämtning av frist i TP210_RAPPORTFRIST", e); In the example above it is assumed that we have set log4j properties so that it automatically write the class and the method. Always use logger and not the following: System.out.println(), System.err.println(), e.printStackTrace() If the web app uses our framework you can get very detailed error information from EJB, if using try-catch in the handler and logging according to the model above: In our project we use this conversion pattern with which method and class names are written out automatically . Here we use two different pattents for console and for datedfileappender: log4j.appender.CONSOLE.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n log4j.appender.DATEDFILE.layout.ConversionPattern=%d [%t] %-5p %c - %m%n In both the examples above method and class wioll be written out. In the console row number will also be written our. toString() Please have a toString() for every object. EX: @Override public String toString() { StringBuilder sb = new StringBuilder(); sb.append(" DwfInformation [ "); sb.append("cc: ").append(cc); sb.append("pn: ").append(pn); sb.append("kc: ").append(kc); sb.append("numberOfPages: ").append(numberOfPages); sb.append("publicationDate: ").append(publicationDate); sb.append("version: ").append(version); sb.append(" ]"); return sb.toString(); } instead of special method which make these outputs public void printAll() { logger.info("inbet: " + getInbetInput()); logger.info("betdat: " + betdat); logger.info("betid: " + betid); logger.info("send: " + send); logger.info("appr: " + appr); logger.info("rereg: " + rereg); logger.info("NY: " + ny); logger.info("CNT: " + cnt); } So is there anything you can add, comment or find questionable with these ways of using the logging? Feel free to answer or comment even if it is not related to Java, Java and log4j is just an implementation of how this is reasoned.

  Read the article

• Java Hint in NetBeans for Identifying JOptionPanes

  - by Geertjan

  I tend to have "JOptionPane.showMessageDialogs" scattered through my code, for debugging purposes. Now I have a way to identify all of them and remove them one by one, since some of them are there for users of the application so shouldn't be removed, via the Refactoring window: Identifying instances of code that I'm interested in is really trivial: import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint( displayName = "#DN_ShowMessageDialogChecker", description = "#DESC_ShowMessageDialogChecker", category = "general") @Messages({ "DN_ShowMessageDialogChecker=Found \"ShowMessageDialog\"", "DESC_ShowMessageDialogChecker=Checks for JOptionPane.showMes" }) public class ShowMessageDialogChecker { @TriggerPattern(value = "$1.showMessageDialog", constraints = @ConstraintVariableType(variable = "$1", type = "javax.swing.JOptionPane")) @Messages("ERR_ShowMessageDialogChecker=Are you sure you need this statement?") public static ErrorDescription computeWarning(HintContext ctx) { return ErrorDescriptionFactory.forName( ctx, ctx.getPath(), Bundle.ERR_ShowMessageDialogChecker()); } } Stick the above class, which seriously isn't much code at all, in a module and run it, with this result: Bit trickier to do the fix, i.e., add a bit of code to let the user remove the statement, but I looked in the NetBeans sources and used the System.out fix, which does the same thing:  import com.sun.source.tree.BlockTree; import com.sun.source.tree.StatementTree; import com.sun.source.util.TreePath; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import org.netbeans.api.java.source.CompilationInfo; import org.netbeans.api.java.source.WorkingCopy; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.Fix; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.JavaFix; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint( displayName = "#DN_ShowMessageDialogChecker", description = "#DESC_ShowMessageDialogChecker", category = "general") @Messages({ "DN_ShowMessageDialogChecker=Found \"ShowMessageDialog\"", "DESC_ShowMessageDialogChecker=Checks for JOptionPane.showMes" }) public class ShowMessageDialogChecker { @TriggerPattern(value = "$1.showMessageDialog", constraints = @ConstraintVariableType(variable = "$1", type = "javax.swing.JOptionPane")) @Messages("ERR_ShowMessageDialogChecker=Are you sure you need this statement?") public static ErrorDescription computeWarning(HintContext ctx) { Fix fix = new FixImpl(ctx.getInfo(), ctx.getPath()).toEditorFix(); return ErrorDescriptionFactory.forName( ctx, ctx.getPath(), Bundle.ERR_ShowMessageDialogChecker(), fix); } private static final class FixImpl extends JavaFix { public FixImpl(CompilationInfo info, TreePath tp) { super(info, tp); } @Override @Messages("FIX_ShowMessageDialogChecker=Remove the statement") protected String getText() { return Bundle.FIX_ShowMessageDialogChecker(); } @Override protected void performRewrite(TransformationContext tc) throws Exception { WorkingCopy wc = tc.getWorkingCopy(); TreePath statementPath = tc.getPath(); TreePath blockPath = tc.getPath().getParentPath(); while (!(blockPath.getLeaf() instanceof BlockTree)) { statementPath = blockPath; blockPath = blockPath.getParentPath(); if (blockPath == null) { return; } } BlockTree blockTree = (BlockTree) blockPath.getLeaf(); List<? extends StatementTree> statements = blockTree.getStatements(); List<StatementTree> newStatements = new ArrayList<StatementTree>(); for (Iterator<? extends StatementTree> it = statements.iterator(); it.hasNext();) { StatementTree statement = it.next(); if (statement != statementPath.getLeaf()) { newStatements.add(statement); } } BlockTree newBlockTree = wc.getTreeMaker().Block(newStatements, blockTree.isStatic()); wc.rewrite(blockTree, newBlockTree); } } } Aside from now being able to use "Inspect & Refactor" to identify and fix all instances of JOptionPane.showMessageDialog at the same time, you can also do the fixes per instance within the editor:

  Read the article

• Tap Into Tier 1 ERP

  - by Christine Randle

  By: Larry Simcox, Senior Director, Accelerate Corporate Programs     Your customers aren’t satisfied with so-so customer service. Your employees aren’t happy with below average salaries.   So why would you settle for second-rate or tier 2 ERP?   A recent report from Nucleus Research found that usability improvements and rapid implementation tools are simplifying deployments, putting tier 1 enterprise applications well within reach for midsize companies. So how can your business tap into the power of tier 1 ERP? And what are the best ways to manage a deployment?   The Reputation of ERP Implementations Overhauling internal operations and implementing ERP can be a challenging endeavor for organizations of all sizes. Midsize companies often shy away from enterprise-class ERP, fearing complexity, limited resources and perceived challenging deployments. Many forward thinking executives experienced ERP implementations in the late 90s and early 2000s and embrace a strategy to grow their business by investing in a foundation for innovation and growth via ERP modernization projects.   In recent years there has been a strong consumerization of IT with enterprise applications and their delivery methods evolving to become more user-friendly.  Today, usability improvements and modern implementation tools have made top-tier ERP solutions more accessible for growing companies. Nucleus found that because enterprise-class software can now be rapidly deployed, the payback is quicker, the risks are lower, the software is less disruptive and overall, companies can differentiate themselves from their competitors and achieve more success with the advantages these types of systems deliver.   Tapping into the power of tier 1 ERP can be made much easier with Oracle Accelerate solutions. Created by Oracle's expert partners and reviewed by Oracle, Oracle Accelerate solutions are simple to deploy, industry-specific, packaged solutions that provide a fast time to benefit, which means getting the right solution in place quickly, inexpensively with a controlled scope and predictable returns.   How are growing midsize companies successfully deploying tier 1 ERP? According to Nucleus Research, companies can increase success in their tier 1 ERP deployments by limiting customization, planning a rapid go-live, bettering communication across departments, and considering different delivery options. Oracle Accelerate solutions incorporate industry best practices and encourage rapid deployments. And even more, Nucleus found customers deploying tier 1 ERP with Oracle that had used Oracle Business Accelerators, Oracle’s rapid implementation tools, reduced the time to deploy Oracle E-Business Suite by at least 50 percent.   Industrial manufacturer L.H. Dottie is one company that needed ERP with enhanced capabilities to support its growth and streamline business processes. Using out-of-the-box configuration of Oracle E-Business Suite modules (provided by Oracle Business Accelerators and delivered by Oracle Partner C3 Business Solutions), L.H. Dottie was able to speed its implementation and went live in just six and a half months. With tier 1 ERP, the company was able to grow and do its business better, automating a variety of processes, accelerating product delivery and gaining powerful data analysis capabilities that helped drive its business into further regions. See more details about their ERP implementation here.   Tier 1 enterprise-class applications have proven to boost the success of Oracle’s midsize customers. As Nucleus Research iterates, companies poised for growth or seeking to compete against larger competitors absolutely can tap into the power of tier 1 ERP and position themselves as enterprise-class through leveraging Oracle Accelerate solutions.   You can learn more here about The Evolving Business Case for Tier - 1 ERP in Midsize Companies in our exclusive webcast with Nucleus.   ###  

  Read the article

• Using a parser to locate faulty code

  - by ryan.riverside

  Lately I've been working a lot in PHP and have run into an abnormally large number of parsing errors. I realize these are my own fault and a result of sloppy initial coding on my part, but it's getting to the point that I'm spending more time resolving tags than developing. In the interest of not slamming my productivity, are there any tricks to locating the problem in the code? What I'd really be looking for would be a line to put in the code which would output the entire faulty tag in the parsing error, or something similar. Purely for reference sake, my current error is Parse error: syntax error, unexpected '}' in /home/content/80/9480880/html/cache/tpl_prosilver_viewtopic_body.html.php on line 50 (which refers to this): </dd><dd><?php if ($_poll_option_val['POLL_OPTION_RESULT'] == 0) { echo ((isset($this->_rootref['L_NO_VOTES'])) ? $this->_rootref['L_NO_VOTES'] : ((isset($user->lang['NO_VOTES'])) ? $user->lang['NO_VOTES'] : '{ NO_VOTES }')); } else { echo $_poll_option_val['POLL_OPTION_PERCENT']; } ?></dd> </dl> <?php }} if ($this->_rootref['S_DISPLAY_RESULTS']) { ?> <dl> <dt>&nbsp;</dt> <dd class="resultbar"><?php echo ((isset($this->_rootref['L_TOTAL_VOTES'])) ? $this->_rootref['L_TOTAL_VOTES'] : ((isset($user->lang['TOTAL_VOTES'])) ? $user->lang['TOTAL_VOTES'] : '{ TOTAL_VOTES }')); ?> : <?php echo (isset($this->_rootref['TOTAL_VOTES'])) ? $this->_rootref['TOTAL_VOTES'] : ''; ?></dd> </dl> <?php } if ($this->_rootref['S_CAN_VOTE']) { ?> <dl style="border-top: none;"> <dt>&nbsp;</dt> <dd class="resultbar"><input type="submit" name="update" value="<?php echo ((isset($this->_rootref['L_SUBMIT_VOTE'])) ? $this->_rootref['L_SUBMIT_VOTE'] : ((isset($user->lang['SUBMIT_VOTE'])) ? $user->lang['SUBMIT_VOTE'] : '{ SUBMIT_VOTE }')); ?>" class="button1" /></dd> </dl> <?php } if (! $this->_rootref['S_DISPLAY_RESULTS']) { ?> <dl style="border-top: none;"> <dt>&nbsp;</dt> <dd class="resultbar"><a href="<?php echo (isset($this->_rootref['U_VIEW_RESULTS'])) ? $this->_rootref['U_VIEW_RESULTS'] : ''; ?>"><?php echo ((isset($this->_rootref['L_VIEW_RESULTS'])) ? $this->_rootref['L_VIEW_RESULTS'] : ((isset($user->lang['VIEW_RESULTS'])) ? $user->lang['VIEW_RESULTS'] : '{ VIEW_RESULTS }')); ?></a></dd> </dl> <?php } ?> </fieldset></div>

  Read the article

• Subterranean IL: Custom modifiers

  - by Simon Cooper

  In IL, volatile is an instruction prefix used to set a memory barrier at that instruction. However, in C#, volatile is applied to a field to indicate that all accesses on that field should be prefixed with volatile. As I mentioned in my previous post, this means that the field definition needs to store this information somehow, as such a field could be accessed from another assembly. However, IL does not have a concept of a 'volatile field'. How is this information stored? Attributes The standard way of solving this is to apply a VolatileAttribute or similar to the field; this extra metadata notifies the C# compiler that all loads and stores to that field should use the volatile prefix. However, there is a problem with this approach, namely, the .NET C++ compiler. C++ allows methods to be overloaded using properties, like volatile or const, on the parameters; this is perfectly legal C++: public ref class VolatileMethods { void Method(int *i) {} void Method(volatile int *i) {} } If volatile was specified using a custom attribute, then the VolatileMethods class wouldn't be compilable to IL, as there is nothing to differentiate the two methods from each other. This is where custom modifiers come in. Custom modifiers Custom modifiers are similar to custom attributes, but instead of being applied to an IL element separately to its declaration, they are embedded within the field or parameter's type signature itself. The VolatileMethods class would be compiled to the following IL: .class public VolatileMethods { .method public instance void Method(int32* i) {} .method public instance void Method( int32 modreq( [mscorlib]System.Runtime.CompilerServices.IsVolatile)* i) {} } The modreq([mscorlib]System.Runtime.CompilerServices.IsVolatile) is the custom modifier. This adds a TypeDef or TypeRef token to the signature of the field or parameter, and even though they are mostly ignored by the CLR when it's executing the program, this allows methods and fields to be overloaded in ways that wouldn't be allowed using attributes. Because the modifiers are part of the signature, they need to be fully specified when calling such a method in IL: call instance void Method( int32 modreq([mscorlib]System.Runtime.CompilerServices.IsVolatile)*) There are two ways of applying modifiers; modreq specifies required modifiers (like IsVolatile), and modopt specifies optional modifiers that can be ignored by compilers (like IsLong or IsConst). The type specified as the modifier argument are simple placeholders; if you have a look at the definitions of IsVolatile and IsLong they are completely empty. They exist solely to be referenced by a modifier. Custom modifiers are used extensively by the C++ compiler to specify concepts that aren't expressible in IL, but still need to be taken into account when calling method overloads. C++ and C# That's all very well and good, but how does this affect C#? Well, the C++ compiler uses modreq(IsVolatile) to specify volatility on both method parameters and fields, as it would be slightly odd to have the same concept represented using a modifier or attribute depending on what it was applied to. Once you've compiled your C++ project, it can then be referenced and used from C#, so the C# compiler has to recognise the modreq(IsVolatile) custom modifier applied to fields, and vice versa. So, even though you can't overload fields or parameters with volatile using C#, volatile needs to be expressed using a custom modifier rather than an attribute to guarentee correct interoperability and behaviour with any C++ dlls that happen to come along. Next up: a closer look at attributes, and how certain attributes compile in unexpected ways.

  Read the article

• "ERROR:Could not find java.nio.file.Paths" when using Oracle JDK 1.7

  - by Ankit

  I want to try out some features rolled out in Oracle's new JDK 1.7. I followed the post:- Oracle JDK 1.7 but the post doesn't seem to help. I was trying to fetch out the structure for java.nio.file.Paths class file but got the following error:- buffer@ankit:~$ javap java.nio.file.Paths ERROR:Could not find java.nio.file.Paths However i can easily get the information about class structures till JAVA SE 1.6, here is an example:- buffer@ankit:~$ javap java.lang.Object Compiled from "Object.java" public class java.lang.Object{ public java.lang.Object(); public final native java.lang.Class getClass(); public native int hashCode(); public boolean equals(java.lang.Object); protected native java.lang.Object clone() throws java.lang.CloneNotSupportedException; public java.lang.String toString(); public final native void notify(); public final native void notifyAll(); public final native void wait(long) throws java.lang.InterruptedException; public final void wait(long, int) throws java.lang.InterruptedException; public final void wait() throws java.lang.InterruptedException; protected void finalize() throws java.lang.Throwable; static {}; } Running java -version gives the following result:- buffer@ankit:~$ java -version java version "1.7.0_09" Java(TM) SE Runtime Environment (build 1.7.0_09-b05) Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode) SYSTEM INFORMATION buffer@ankit:~$ sudo update-alternatives --config java [sudo] password for buffer: There are 4 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java 1051 manual mode 3 /usr/lib/jvm/jdk1.7.0_09/ 1 manual mode * 4 /usr/lib/jvm/jdk1.7.0_09/bin/java 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javac There are 2 choices for the alternative javac (providing /usr/bin/javac). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 manual mode * 2 /usr/lib/jvm/jdk1.7.0_09/bin/javac 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javaws There are 3 choices for the alternative javaws (providing /usr/bin/javaws). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/javaws 1060 manual mode * 3 /usr/lib/jvm/jdk1.7.0_09/bin/javaws 1 manual mode The directory structure of /usr/lib/jvm/ is as follows:- buffer@ankit:~$ ls -l /usr/lib/jvm/ total 24 lrwxrwxrwx 1 root root 24 Dec 2 2011 default-java -> java-1.6.0-openjdk-amd64 drwxr-xr-x 4 root root 4096 Nov 8 16:24 java-1.5.0-gcj-4.6 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-1.6.0-openjdk -> java-1.6.0-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 00:01 java-1.6.0-openjdk-amd64 -> java-6-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 06:59 java-1.7.0-openjdk-amd64 -> java-7-openjdk-amd64 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-6-openjdk -> java-1.6.0-openjdk-amd64 drwxr-xr-x 7 root root 4096 Nov 8 16:24 java-6-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 16:24 java-6-openjdk-common drwxr-xr-x 5 root root 4096 Nov 8 05:48 java-7-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 05:48 java-7-openjdk-common drwxr-xr-x 8 buffer buffer 4096 Sep 25 09:08 jdk1.7.0_09 Any help would be highly appreciated.

  Read the article

• Slick2D, Nifty GUI listeners problem

  - by Patokun

  I'm trying to get Nifty GUI to work with Slick2D. So far everything is going great, except that I can't seem to figure out how to properly interact with the GUI. I'm trying the example in the nifty manual http://sourceforge.n....0.pdf/download but it doesn't seem to entirely work. The Element controller is being called for bind(...), init(...) and onStartScreen() as it should, as I can see their println output, but the next() method isn't being called when I click on the GUI element that I assigned the controller to, nor the screen controller as no output from println is shown. What's weird is, that the player is moving, so the mouse input is working. It's supposed to be called when I click the mouse button on it from the in the XML. Here is my code: My Element controller: public class ElementController implements Controller { private Element element; @Override public void bind(Nifty nifty, Screen screen, Element element, Properties parameter, Attributes controlDefinitionAttributes) { this.element = element; System.out.println("bind() called for element: " + element); } @Override public void init(Properties parameter, Attributes controlDefinitionAttributes) { System.out.println("init() called for element: " + element); } @Override public void onStartScreen() { System.out.println("onStartScreen() alled for element: " + element); } @Override public void onFocus(boolean getFocus) { System.out.println("onFocus() called for element: " + element + ", with: " + getFocus); } @Override public boolean inputEvent(NiftyInputEvent inputEvent) { return false; } public void next() { System.out.println("next() clicked for element: " + element); } } MyScreenController: class MyScreenController implements ScreenController { public void bind(Nifty nifty, Screen screen) {} public void onEndScreen() {} public void onStartScreen() {} public void next() { System.out.println("next() called from MyScreenController"); } } And my XML file: <?xml version="1.0" encoding="UTF-8"?> <nifty xmlns="http://nifty-gui.sourceforge.net/nifty-1.3.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xsi:schemaLocation="http://niftygui.sourceforge.net/nifty-1.3.xsd http://nifty-gui.sourceforge.net/nifty-1.3.xsd"> <screen id="start" controller="predaN00b.theThing.V0004.MyScreenController"> <layer childLayout="center" controller="predaN00b.theThing.V0004.ElementController"> <panel width="100px" height="100px" childLayout="vertical" backgroundColor="#ff0f"> <text font="aurulent-sans-16.fnt" color="#ffff" text="Hello World!"> <interact onClick="next()" /> </text> </panel> </layer> </screen> </nifty> My main class, in case it's needed: public class MainGameState extends BasicGame { public Nifty nifty; public MainGame() { super("Test"); } public void init(GameContainer container, StateBasedGame game) throws SlickException { nifty = new Nifty(new SlickRenderDevice(container), new NullSoundDevice(), new PlainSlickInputSystem(), new AccurateTimeProvider()); nifty.addXml("/xml/MainState.xml"); nifty.gotoScreen("start"); } public void update(GameContainer container, StateBasedGame game, int delta) throws SlickException { nifty.update(); } public void render(GameContainer container, StateBasedGame game, Graphics graphics) throws SlickException { nifty.render(false); } public static void main(String[] args) throws SlickException { AppGameContainer app = new AppGameContainer(new MainGame()); app.setAlwaysRender(true); app.setDisplayMode( 1260 , 720, false); //window size app.start(); } }

  Read the article

• Logging connection strings

  If you some of the dynamic features of SSIS such as package configurations or property expressions then sometimes trying to work out were your connections are pointing can be a bit confusing. You will work out in the end but it can be useful to explicitly log this information so that when things go wrong you can just review the logs. You may wish to develop this idea further and encapsulate such logging into a custom task, but for now lets keep it simple and use the Script Task. The Script Task code below will raise an Information event showing the name and connection string for a connection. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Get the connection string, we need to know the name of the connection Dim connectionName As String = "My OLE-DB Connection" Dim connectionString As String = Dts.Connections(connectionName).ConnectionString ' Format the message and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connectionName, connectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Dts.TaskResult = Dts.Results.Success End Sub End Class Building on that example it is probably more flexible to log all connections in a package as shown in the next example. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Loop through all connections in the package For Each connection As ConnectionManager In Dts.Connections ' Get the connection string and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connection.Name, connection.ConnectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Next Dts.TaskResult = Dts.Results.Success End Sub End Class By using the Information event it makes it readily available in the designer, for example the Visual Studio Output window (Ctrl+Alt+O) or the package designer Execution Results tab, and also allows you to readily control the logging by choosing which events to log in the normal way. Now before somebody starts commenting that this is a security risk, I would like to highlight good practice for building connection managers. Firstly the Password property, or any other similar sensitive property is always defined as write-only, and secondly the connection string property only uses the public properties to assemble the connection string value when requested. In other words the connection string will never contain the password. I have seen a couple of cases where this is not true, but that was just bad development by third-parties, you won’t find anything like that in the box from Microsoft.   Whilst writing this code it made me wish that there was a custom log entry that you could just turn on that did this for you, but alas connection managers do not even seem to support custom events. It did however remind me of a very useful event that is often overlooked and fits rather well alongside connection string logging, the Execute SQL Task’s custom ExecuteSQLExecutingQuery event. To quote the help reference Custom Messages for Logging - Provides information about the execution phases of the SQL statement. Log entries are written when the task acquires connection to the database, when the task starts to prepare the SQL statement, and after the execution of the SQL statement is completed. The log entry for the prepare phase includes the SQL statement that the task uses. It is the last part that is so useful, how often have you used an expression to derive a SQL statement and you want to log that to make sure the correct SQL is being returned? You need to turn it one, by default no custom log events are captured, but I’ll refer you to a walkthrough on setting up the logging for ExecuteSQLExecutingQuery by Jamie.

  Read the article

• Adding custom interfaces to your mock instance.

  - by mehfuzh

  Previously, i made a post  showing how you can leverage the dependent interfaces that is implemented by JustMock during the creation of mock instance. It could be a informative post that let you understand how JustMock behaves internally for class or interfaces implement other interfaces into it. But the question remains, how you can add your own custom interface to your target mock. In this post, i am going to show you just that. Today, i will not start with a dummy class as usual rather i will use two most common interfaces in the .NET framework  and create a mock combining those. Before, i start i would like to point out that in the recent release of JustMock we have extended the Mock.Create<T>(..) with support for additional settings though closure. You can add your own custom interfaces , specify directly the real constructor that should be called or even set the behavior of your target. Doing a fast forward directly to the point,  here goes the test code for create a creating a mock that contains the mix for ICloneable and IDisposable using the above mentioned changeset. var myMock = Mock.Create<IDisposable>(x => x.Implements<ICloneable>()); var myMockAsClonable = myMock as ICloneable; bool isCloned = false;   Mock.Arrange(() => myMockAsClonable.Clone()).DoInstead(() => isCloned = true);   myMockAsClonable.Clone();   Assert.True(isCloned);   Here, we are creating the target mock for IDisposable and also implementing ICloneable. Finally, using the “as” for getting the ICloneable reference accordingly arranging it, acting on it and asserting if the expectation is met properly. This is a very rudimentary example, you can do the same for a given class: var realItem = Mock.Create<RealItem>(x => {     x.Implements<IDisposable>();     x.CallConstructor(() => new RealItem(0)); }); var iDispose = realItem as IDisposable;     iDispose.Dispose(); Here, i am also calling the real constructor for RealItem class.  This is to mention that you can implement custom interfaces only for non-sealed classes or less it will end up with a proper exception. Also, this feature don’t require any profiler, if you are agile or running it inside silverlight runtime feel free to try it turning off the JM add-in :-). TIP :  Ability to  specify real constructor could be a useful productivity boost in cases for code change and you can re-factor the usage just by one click with your favorite re-factor tool.   That’s it for now and hope that helps Enjoy!!

  Read the article

• Cutting-Edge Demos Coming to Collaborate12

  - by mvaughan

  Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} By Kathy Miedema, Oracle Applications User Experience Are you building your Collaborate 2012 agenda? Leave room for a stop at the demogrounds while you’re in Las Vegas from April 22-26. In addition to several presentations on the Oracle user experience, the Applications User Experience (UX) team will be on the demo grounds with a new eye-tracking tool, as well as demos that showcase new user experience designs. Check out our cutting-edge technology, which we use to obtain feedback that helps improve the user experience of Oracle applications, and see what our next-generation designs are in the HCM and FIN user experiences.  Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Photo by Martin Taylor – Oracle Applications User Experience An Apps UX team member demonstrates what happens during an eye-tracking test. The dots on the screen show were test participants were looking and how long they spent at each point in the page. The UX team will also be staffing an on-site lab at Collaborate. At on-site labs, conference participants can sign up to join customer feedback sessions on several different kinds of work flow designs, from HCM to FIN to CRM to mobile. The feedback UX team members collect helps inform and fine-tune the user experiences being designed for next-generation applications. At Collaborate12, for example, user experience designs around Help and organizational charts will be tested for usability. The Apps UX team brings on-site labs to many major user group conferences, including OpenWorld 2012 in October in San Francisco. Stay tuned to find out when our recruiters are ready to sign up participants, or leave a comment below to find out whether an on-site lab will be at your next conference. For information on the following presentations, which will be delivered by Apps UX team members, check the Usable Apps Events page. • The Fusion Applications User Experience: Transforming Work into Insight • Customizations Under the Covers – Making Fusion Applications Your Own • OAUG Fusion Middleware SIG (FMWSIG) • 18 Months with Fusion Applications – Stories From The Trenhes • PeopleTools Tips and Techniques

  Read the article

• Implementing Search for BlogReader Windows 8 Sample

  - by Harish Ranganathan

  The BlogReader sample is an excellent place to start speeding up your Windows 8 development skills.  The tutorial is available here and the complete source code is available here Create a project called WindowsBlogReader and create pages for ItemsPage.xaml, SplitPage.xaml and DetailPage.xaml and copy the corresponding code blocks from the sample listed above. Created a class file FeedData.cs and copy the code.  Finally, create a class DateConverter.cs and copy the code associated with it. With that you should be able to build and run the project.  There seems to be one issue in the sample feeds listed that the first week (feed1) doesn’t seem to expose it.  So you can skip that and use the second feed as first feed.  You will end up with one feed less but it works. I had demonstrated this in the recent TechDays at Chennai.  How we can use the Search Contract and implement Search for within the Blog Titles. First off, we need to declare that the App will be using Search Contract, in the Package.appmanifest file Next, we would need a handle of the Search Contract when user types on the search window in Charms Menu. If you had completed the code sample from the link above, you would have ItemsPage.xaml and ItemsPage.xaml.cs.  Open the ItemsPage.xaml.cs. Import the namespaces using System.Collections.ObjectModel and System.Linq. in the ItemsPage() constructor, right after this.InitializeComponent(); add the following code Windows.ApplicationModel.Search.SearchPane.GetForCurrentView().QuerySubmitted += ItemsPage_QuerySubmitted; This event is fired when users open up the Search Panel from Charms Menu, type something and hit enter. We need to handle this event declared in the delegate.  For that we need to pull the FeedDataSource instantiation to the root of the class to make it global. So, add the following as the first line within the partial class FeedDataSource feedDataSource; Also, modify the LoadState method, as follows:- protected override void LoadState(Object navigationParameter, Dictionary<String, Object> pageState)        {            feedDataSource = (FeedDataSource)App.Current.Resources["feedDataSource"];            if (feedDataSource != null)            {                this.DefaultViewModel["Items"] = feedDataSource.Feeds;            }        } Next is to implement the ItemsPage_QuerySubmitted method void ItemsPage_QuerySubmitted(Windows.ApplicationModel.Search.SearchPane sender, Windows.ApplicationModel.Search.SearchPaneQuerySubmittedEventArgs args)         {             this.DefaultViewModel["Items"] = from dynamic item in feedDataSource.Feeds                                              where                                              item.Title.Contains(args.QueryText)                                              select item;         } As you can see we are almost using the same defaultviewmodel with the change that we are using a linq query to do a search on feeds which has the Title that matches QueryText. With this we are ready to run the app. Run the App.  Hit the Charms Menu with Windows + C key combination and type a text to search within the blog. You can see that it filters the Blogs which has the matching text. We can modify the above Linq query to do a search for the Text in other attributes like description, actual blog content etc., I have uploaded the complete code since the original WindowsBlogReader Code is not available for download.  You can download it from here note:  this code is provided as-is without any warranties.  Cheers!!!

  Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >