Search Results

Search found 28957 results on 1159 pages for 'single instance'.

Page 541/1159 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• Can iptables allow Squid to process a request, then redirect the response packets to another port?

  - by Dan H

  I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• About Entitlement Grants in ADF Security of JDeveloper 11.1.1.4

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle JDeveloper 11.1.1.4 comes with a new ADF Security feature called "entitlement grants". This has nothing to do with Oracle Entitlement Server (OES) but is the ability to group resources into permission sets so they can be granted with a single grant statement. For example, as good practices when organizing your projects, you may have grouped your bounded task flows by functionality and responsibility in sub folders under the WEB-INF directory. If one of the folders holds bounded task flows that are accessible to all authenticated users, you may create an entitlement grant allAuthUserBTF and select all bounded task flows that are accessible for authenticated users as resources. You can then grant allAuthUserBTF to the authenticated-role so that with only a single grant statement all selected bounded task flows are protected. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <permission-sets>         <permission-set>             <name>PublicBoundedTaskFlows</name>             <member-resources>               <member-resource>                 <resource-name>                      /WEB-INF/public/home-btf.xml#home-btf                 </resource-name>                 <type-name-ref>TaskFlowResourceType</type-name-ref>                 <display-name> ... </display-name>                 <actions>view</actions>               </member-resource>               <member-resource>                 <resource-name>                         /WEB-INF/public/preferences-btf.xml#preferences-btf                </resource-name>                 <type-name-ref>TaskFlowResourceType</type-name-ref>                 <display-name>...</display-name>                 <actions>view</actions>               </member-resource>             </member-resources>           </permission-set>   </permission-sets> The grant statement for this permission set is added as shown below <grant>   <grantee>     <principals>        <principal>             <name>authenticated-role</name>             <class>oracle.security.jps.internal.core.principals.JpsAuthenticatedRoleImpl</class>         </principal>       </principals>     </grantee>     <permission-set-refs>         <permission-set-ref>            <name>PublicBoundedTaskFlows</name>         </permission-set-ref>      </permission-set-refs> </grant>

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by user28837

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

  Read the article

• case-specific mod rewrite on Wordpress subdomain multisite

  - by Steve

  I have split a Wordpress blog into multiple category-specific blogs using subdomains, as the topics in the original blog were too broad to be lumped together effectively. Posts were exported from the parent www blog and imported into the subject-specific subdomain blogs. I believe .htaccess provides mod rewrite for all subdomains (including the original www) in a single .htaccess file. I use .htaccess to perform 301 redirect on post categories to the relevant post on the subdomain's blog. eg: RedirectMatch 301 ^/auto/(.*)$ http://auto.example.com/$1 The problem I have is that the category has been retained in the permalink structure in the subdomain blog, so that www.example.com/auto/mercedes is now auto.example.com/auto/mercedes. The 1st URL is redirect to the 2nd, but unfortunately, the 2nd URL is redirected to auto.example.com/mercedes using the same rewrite rule, which is not found, as the permalink on the subdomain's blog retains the parent category of auto. The solution would be to adjust the permalink structure in the subdomain's WP settings, so that the top level category does not duplicate the subdomain. My question would be: how do I then strip a section of the original (www) blog's post URL from the subdomain's URL when redirecting? eg: How do I redirect www.example.com/auto/mercedes to auto.example.com/mercedes? I'm assuming this would be a regular expression trick, which I am not great at. Update: I might have to use: RewriteCond %{HTTP_HOST} !auto.example.com$ in the default Wordpress if loop in .htaccess, and seperate my custom subdomain redirections into a second if loop section.

  Read the article

• different data with same title and keywords

  - by Junaid Saeed

  here is my scenario i have a website where i redirect my users basing upon the device they were using, lets say a user is visiting from an iPad, i take him directly to the page of iPad wallpapers, the user selects iPad version & i take the user to the gallery of wallpapers where the user can select & download any wallpaper. Every wallpaper is the required resolution, i have my reasons for doing this, now the thing is there are diff. resolution. versions of an image appearing one 5 diff. sections of my website, each having their own view page Now there is only one record in db.table for the image, and basing on the my consistent naming convention of the images, i pick the required image. this means when 5 different pages are generated in 5 categorized sections of the website, due to a shared DB record, the keywords, the titles and every single detail of the 5 pages is same besides the resolution of the image, and the section specific details that the page has and yeah the pages also have different paths like wallpapers.com\ipad-1\cars\Ferrari-dino.html wallpapers.com\ipad-2\cars\Ferrari-dino.html wallpapers.com\ipad-3\cars\Ferrari-dino.html wallpapers.com\ipad-4\cars\Ferrari-dino.html wallpapers.com\ipad-5\cars\Ferrari-dino.html now this is my scenario, How do Search Engines see it and how do they rank it? Is it a Good or Normal or Bad SEO practice? If bad how dangerous it is for my sites SEO? i need your comments on my scenario.

  Read the article

• Screwed up terminal after modifying bashrc

  - by omgzor

  I ended up screwing up my terminal, while setting up Sbt for the Coursera Scala course. I can't summon gedit (or anything else) anymore. I get the following error: Command 'gedit' is available in '/usr/bin/gedit' The command could not be located because '/usr/bin' is not included in the PATH environment variable. Also, each new instance of Terminal writes these messages before any command is written: -bash: :/home/antonio/jdk7/jdk1.7.0_07/bin: No such file or directory -bash: export: `/home/antonio/Desktop/Scala/install/sbt/bin:/home/antonio/jdk7/jdk1.7.0_07/bin': not a valid identifier I recently did a manual installation of the jdk 7, which apparently works: java -version java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) While setting up Sbt, I made the mistake of editing bashrc by writing gedit ~/.bashrc on my terminal instead of writing gedit .bashrc, I wrote the following lines at the end of the bashrc file that opened: export PATH=/PATH/TO/YOUR/jdk1.7.0-VERSION/bin:$PATH export PATH=/home/antonio/jdk7/jdk1.7.0_07/bin:$PATH What is wrong here? How can I access my bashrc file and modify it again?

  Read the article

• Will more memory help my CPU-peaking SQL Server 2008 R2

  - by Tor Haugen

  I'm supporting a system running against a SQL Server 2008 R2. The server is a single-CPU box with 8 GB of memory. As traffic has increased, the server has started saturating, peaking to 100% CPU ever more often. Disk I/O remains moderate (somewhat surprisingly). Obviously, a new server would be the best option. But failing that, can I expect a noticable improvement from installing more RAM? Or does RAM only help for I/O issues (through caching)?

  Read the article

• ADFS 2.0 and WebEx

  - by DavisTasar

  We have a brand new deployment going on, where our University has purchased WebEx MeetingPlace. We have the Cisco CallManager component working, but the integration with Single Sign On with ADFS 2.0 has been nothing short of torture. The biggest problem I'm working with is that we use Split-Brain DNS, and our internal domain name versus external domain name is different. Trying to determine what credentials are getting passed back and forth, certificate errors for using the self-signed certificate, etc. Does anyone have any experience with this, or something similar? Do you have any tips, or watch-out-for-this, etc.? I've not worked with a Federated Authentication system before, and this scenario is very black-box-esque. Sorry, I'm also partially ranting as I'm frustrated.

  Read the article

• Excel - Filling images using a reference image

  - by tjans

  I have a spreadsheet that I use to create baseball cards for a tabletop baseball game. There are about 20 cards on my sheet, and I'd like to add a spot where I can set the logo and have it reflect that logo in each card without having to update 20 different images each time I create cards for a new team (and thus, a new logo). Is there a way to automate this process similar to setting one cell equal to the value of another (=A4, for instance)? I think the images aren't part of a cell and they float on top of the sheet, but I had hoped there was a way either with a macro or other VBA function (or maybe something built-in) that would accomplish this.

  Read the article

• Where do I learn about IP blocks and subnets? Or is there just a calculator that does it all for me?

  - by cwd

  Amazon's elastic compute tool (among others) requires the ip block format for their command: ec2-authorize websrv -P tcp -p 80 -s 205.192.0.0/16 I may be doing this wrong, but as far as I can tell I need to use the block format even for a single IP address. 1) So, how would I do that for this IP? 71.75.232.132 Several years ago I took a CCNA class, and I remember going over IPs and subnets, masks, broadcast addresses, class a/b/c networks, etc. However a lot seems to have changed since then - for example I don't think you can tell what "class" a network is in just by looking at it anymore - sometimes they could be multiple classes. 2) Anyhow, my second question is where do I go to get a refresher on all these things? 3) Or should I just be using ipcalc or an online calculator to do it all for me - and if so, which one?

  Read the article

• Why do programmers seem to be such bad spellers?

  - by Joel Etherton

  Programming languages are very precise tools based on explicit grammars. They're very picky, and when being used they require an exacting amount of detail. C#, for instance, is case sensitive so even getting the case of an argument wrong will cause an error. Questions asked all over the StackExchange are replete with misspellings, grammatical errors, and other problems that seem to indicate a lack of attention to detail when it comes to the language itself. Now, I understand there are a lot of programmers out there whose native language is not English, and I am not directing this question (rant one might say) at them. I'm referring to the individuals who are clearly from an English speaking background who refuse to pay attention to these simple details. I am not perfect by any means, but I try to use the language correctly so that my meaning will be understood correctly. I find programmers misspelling variable names, classes, and all manner of words in any kind of technical documentation they might write. I have had to withstand code where I am repeatedly referring to the subit[sic] button or HttpWebResponse reponse. The general complaint about bad spelling is one thing, and it will always be there. I accept that. But my question/comment is about the proclivity of bad spelling within the programming community. I would think that people who deal with such exacting tools to be more naturally predisposed towards proper spelling. Yet this doesn't seem to be the case.

  Read the article

• Running ssh-agent from a shell script

  - by Dan

  I'm trying to create a shell script that, among other things, starts up ssh-agent and adds a private key to the agent. Example: #!/bin/bash # ... ssh-agent $SHELL ssh-add /path/to/key # ... The problem with this is ssh-agent apparently kicks off another instance of $SHELL (in my case, bash) and from the script's perspective it's executed everything and ssh-add and anything below it is never run. How can I run ssh-agent from my shell script and keep it moving on down the list of commands?

  Read the article

• Where to store short strings (with my key) on the internet?

  - by Vi

  Is there simple service to store strings under my key that can be used by bots? Requirements: Simple command line access, automatic posting allowed No need to keep some session with the service alive I choose the key (so pastebins fail) No requirement for registration/authentication (for simplicity) The string should be kept for about a month. I want something like: Store: $ echo some_data_0x1299C0FF | store_my_string testtest2011 Retrieve: $ retrive_my_string testtest2011 some_data_0x1299C0FF Do you have ideas what should I use for it? I can only think of using IRC somehow (channel topics, /whowas, ...), but this is too complex for this simple task. No security is needed: anyone can update my string. The task looks very simple, so I expect the solution to be similarly simple. Expecting something like single simple curl call.

  Read the article

• Enterprise 2.0 Conference: November 14-17

  - by kellsey.ruppel

  Oracle is proud to be a Gold sponsor of the Enterprise 2.0 West Conference, November 14-17, 2011 in Santa Clara, CA. You will see the latest collaboration tools and technologies, and learn from thought leaders in Enterprise 2.0's comprehensive conference. You won’t want to miss this opportunity to learn about Oracle WebCenter, the user engagement platform for social business—connecting people and information. Oracle WebCenter brings together the most complete portfolio of portal, web experience management, content, social, and collaboration technologies into a single integrated product suite, and it provides the foundation for Oracle Fusion Middleware and Oracle Fusion Applications to deliver a next-generation user experience. If you're attending the conference, you'll want to be sure to catch Andy MacMillan at these 2 sessions. Market Leaders Theater Session "Today's Successful Enterprises are Social Enterprises" Featuring: Andy MacMillan, Vice President, Oracle WebCenter Product Management Tuesday, November 15, 1:00 p.m. – 1:20 p.m.  Technology Landscape Panel "Marketplace Choices: Platforms vs. Products" Moderator: Tony Byrne, President, Real Story Group Featuring: Andy MacMillan, Vice President, Oracle WebCenter Product Management Tuesday, November 15, 2:30 p.m. – 3:30 p.m. Enterprise 2.0 conference attendees will also have the opportunity to meet with Oracle WebCenter experts and see live demonstrations of Oracle WebCenter and Oracle Social Network by visiting Oracle booth #209. Exhibit show floor hours: Tuesday, November 15, 12:00 p.m. – 6:00 p.m. and Wednesday, November 16, 12:00 p.m. – 6:00 p.m. Be sure to follow @oraclewebcenter and #e2conf for the latest updates! We look forward to seeing you this week in Santa Clara!

  Read the article

• Which algorithms/data structures should I "recognize" and know by name?

  - by Earlz

  I'd like to consider myself a fairly experienced programmer. I've been programming for over 5 years now. My weak point though is terminology. I'm self-taught, so while I know how to program, I don't know some of the more formal aspects of computer science. So, what are practical algorithms/data structures that I could recognize and know by name? Note, I'm not asking for a book recommendation about implementing algorithms. I don't care about implementing them, I just want to be able to recognize when an algorithm/data structure would be a good solution to a problem. I'm asking more for a list of algorithms/data structures that I should "recognize". For instance, I know the solution to a problem like this: You manage a set of lockers labeled 0-999. People come to you to rent the locker and then come back to return the locker key. How would you build a piece of software to manage knowing which lockers are free and which are in used? The solution, would be a queue or stack. What I'm looking for are things like "in what situation should a B-Tree be used -- What search algorithm should be used here" etc. And maybe a quick introduction of how the more complex(but commonly used) data structures/algorithms work. I tried looking at Wikipedia's list of data structures and algorithms but I think that's a bit overkill. So I'm looking more for what are the essential things I should recognize?

  Read the article

• How does java permgen relate to code size

  - by brad

  I've been reading a lot about java memory management, garbage collecting et al and I'm trying to find the best settings for my limited memory (1.7g on a small ec2 instance) I'm wondering if there is a direct correlation between my code size and the permgen setting. According to sun: The permanent generation is special because it holds data needed by the virtual machine to describe objects that do not have an equivalence at the Java language level. For example objects describing classes and methods are stored in the permanent generation. To me this means that it's literally storing my class def'ns etc... Does this mean there is a direct correlation between my compiled code size and the permgen I should be setting? My whole app is about 40mb and i noticed we're using 256mb permgen. I'm thinking maybe we're using memory that could be better allocated to dynamic code like object instances etc...

  Read the article

• Java web app, with plugin framework and ability to connect to source for updates

  - by lessthancommon

  I've searched all around for some good sources, but either have been searching for the wrong keywords, or I'm just missing something. I'm looking to redevelop a web app I've been using for some time now. Many parts are out of date, and we're constantly throwing in little hacks to attempt to give it new life. So what I'd like to do is re-engineer it from the ground up, built on some sort of plug-in framework. Before I continue, I'm more or less an intermediate Java programmer. In some ways, I'm hoping to use this project as a big learning experience. I've read a lot about OSGi, and it seems that's the most complete framework. Ideally, I would like an end result web app which I can run one instance as my hosting environment, and other instances can connect to it to grab new and updated plug-ins. Eventually I'll want to lock down these plug-ins based on some undecided criteria of who can get them (basically some will simply be updates, others will provide new functionality and should be "purchased" through an external system). But that will probably be handled in a later phase. There should be an administration view for managing bundles in a hot environment (looking to avoid having to restart the server for an update). I know all these things are possible, I'm just trying to find some good resources for reference. All the OSGi tutorials I'm finding seem to be too simplistic. If anyone here can guide me in the right direction on any or all of the items I'm looking for, it would be much appreciated. Also, this is my first post, so I'll take any comments/criticisms about the content of my post. Thanks!

  Read the article

• BizTalk HL7 Receive Pipeline Exception

  - by Paul Petrov

  If you experience sequence of errors below with BizTalk HL7 MLLP receive ports you may need to request a hotfix from Microsoft. Knowledge base article number is 2454887 but it’s still not available on the KB site. The hotfix is recently released and you may need to open support ticket to get to it. It requires three other hotfixes installed: ·         970492 (DASM 3.7.502.2) ·         973909 (additional ACK codes) ·         981442 (Microsoft.solutions.btahl7.mllp.dll 3.7.509.2) If the exceptions below repeatedly appear in the event log you most likely would be helped by the hotfix: Fatal error encountered in 2XDasm. Exception information is Cannot access a disposed object. Object name: 'CEventingReadStream'. There was a failure executing the receive pipeline: "BTAHL72XPipelines.BTAHL72XReceivePipeline, BTAHL72XPipelines, Version=1.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "BTAHL7 2.X Disassembler" Receive Port: "ReceivePortName" URI: "IPAddress:portNumber" Reason: Cannot access a disposed object. Object name: 'CEventingReadStream'. The Messaging Engine received an error from transport adapter "MLLP" when notifying the adapter with the BatchComplete event. Reason "Object reference not set to an instance of an object." We’ve been through a lot of troubleshooting with Microsoft Product Support and they did a great job finding an issue and releasing a fix.

  Read the article

• Code Reuse is (Damn) Hard

  - by James Michael Hare

  Being a development team lead, the task of interviewing new candidates was part of my job.  Like any typical interview, we started with some easy questions to get them warmed up and help calm their nerves before hitting the hard stuff. One of those easier questions was almost always: “Name some benefits of object-oriented development.”  Nearly every time, the candidate would chime in with a plethora of canned answers which typically included: “it helps ease code reuse.”  Of course, this is a gross oversimplification.  Tools only ease reuse, its developers that ultimately can cause code to be reusable or not, regardless of the language or methodology. But it did get me thinking…  we always used to say that as part of our mantra as to why Object-Oriented Programming was so great.  With polymorphism, inheritance, encapsulation, etc. we in essence set up the concepts to help facilitate reuse as much as possible.  And yes, as a developer now of many years, I unquestionably held that belief for ages before it really struck me how my views on reuse have jaded over the years.  In fact, in many ways Agile rightly eschews reuse as taking a backseat to developing what's needed for the here and now.  It used to be I was in complete opposition to that view, but more and more I've come to see the logic in it.  Too many times I've seen developers (myself included) get lost in design paralysis trying to come up with the perfect abstraction that would stand all time.  Nearly without fail, all of these pieces of code become obsolete in a matter of months or years. It’s not that I don’t like reuse – it’s just that reuse is hard.  In fact, reuse is DAMN hard.  Many times it is just a distraction that eats up architect and developer time, and worse yet can be counter-productive and force wrong decisions.  Now don’t get me wrong, I love the idea of reusable code when it makes sense.  These are in the few cases where you are designing something that is inherently reusable.  The problem is, most business-class code is inherently unfit for reuse! Furthermore, the code that is reusable will often fail to be reused if you don’t have the proper framework in place for effective reuse that includes standardized versioning, building, releasing, and documenting the components.  That should always be standard across the board when promoting reusable code.  All of this is hard, and it should only be done when you have code that is truly reusable or you will be exerting a large amount of development effort for very little bang for your buck. But my goal here is not to get into how to reuse (that is a topic unto itself) but what should be reused.  First, let’s look at an extension method.  There’s many times where I want to kick off a thread to handle a task, then when I want to reign that thread in of course I want to do a Join on it.  But what if I only want to wait a limited amount of time and then Abort?  Well, I could of course write that logic out by hand each time, but it seemed like a great extension method: 1: public static class ThreadExtensions 2: { 3: public static bool JoinOrAbort(this Thread thread, TimeSpan timeToWait) 4: { 5: bool isJoined = false; 6:  7: if (thread != null) 8: { 9: isJoined = thread.Join(timeToWait); 10:  11: if (!isJoined) 12: { 13: thread.Abort(); 14: } 15: } 16: return isJoined; 17: } 18: } 19:  When I look at this code, I can immediately see things that jump out at me as reasons why this code is very reusable.  Some of them are standard OO principles, and some are kind-of home grown litmus tests: Single Responsibility Principle (SRP) – The only reason this extension method need change is if the Thread class itself changes (one responsibility). Stable Dependencies Principle (SDP) – This method only depends on classes that are more stable than it is (System.Threading.Thread), and in itself is very stable, hence other classes may safely depend on it. It is also not dependent on any business domain, and thus isn't subject to changes as the business itself changes. Open-Closed Principle (OCP) – This class is inherently closed to change. Small and Stable Problem Domain – This method only cares about System.Threading.Thread. All-or-None Usage – A user of a reusable class should want the functionality of that class, not parts of that functionality.  That’s not to say they most use every method, but they shouldn’t be using a method just to get half of its result. Cost of Reuse vs. Cost to Recreate – since this class is highly stable and minimally complex, we can offer it up for reuse very cheaply by promoting it as “ready-to-go” and already unit tested (important!) and available through a standard release cycle (very important!). Okay, all seems good there, now lets look at an entity and DAO.  I don’t know about you all, but there have been times I’ve been in organizations that get the grand idea that all DAOs and entities should be standardized and shared.  While this may work for small or static organizations, it’s near ludicrous for anything large or volatile. 1: namespace Shared.Entities 2: { 3: public class Account 4: { 5: public int Id { get; set; } 6:  7: public string Name { get; set; } 8:  9: public Address HomeAddress { get; set; } 10:  11: public int Age { get; set;} 12:  13: public DateTime LastUsed { get; set; } 14:  15: // etc, etc, etc... 16: } 17: } 18:  19: ... 20:  21: namespace Shared.DataAccess 22: { 23: public class AccountDao 24: { 25: public Account FindAccount(int id) 26: { 27: // dao logic to query and return account 28: } 29:  30: ... 31:  32: } 33: } Now to be fair, I’m not saying there doesn’t exist an organization where some entites may be extremely static and unchanging.  But at best such entities and DAOs will be problematic cases of reuse.  Let’s examine those same tests: Single Responsibility Principle (SRP) – The reasons to change for these classes will be strongly dependent on what the definition of the account is which can change over time and may have multiple influences depending on the number of systems an account can cover. Stable Dependencies Principle (SDP) – This method depends on the data model beneath itself which also is largely dependent on the business definition of an account which can be very inherently unstable. Open-Closed Principle (OCP) – This class is not really closed for modification.  Every time the account definition may change, you’d need to modify this class. Small and Stable Problem Domain – The definition of an account is inherently unstable and in fact may be very large.  What if you are designing a system that aggregates account information from several sources? All-or-None Usage – What if your view of the account encompasses data from 3 different sources but you only care about one of those sources or one piece of data?  Should you have to take the hit of looking up all the other data?  On the other hand, should you have ten different methods returning portions of data in chunks people tend to ask for?  Neither is really a great solution. Cost of Reuse vs. Cost to Recreate – DAOs are really trivial to rewrite, and unless your definition of an account is EXTREMELY stable, the cost to promote, support, and release a reusable account entity and DAO are usually far higher than the cost to recreate as needed. It’s no accident that my case for reuse was a utility class and my case for non-reuse was an entity/DAO.  In general, the smaller and more stable an abstraction is, the higher its level of reuse.  When I became the lead of the Shared Components Committee at my workplace, one of the original goals we looked at satisfying was to find (or create), version, release, and promote a shared library of common utility classes, frameworks, and data access objects.  Now, of course, many of you will point to nHibernate and Entity for the latter, but we were looking at larger, macro collections of data that span multiple data sources of varying types (databases, web services, etc). As we got deeper and deeper in the details of how to manage and release these items, it quickly became apparent that while the case for reuse was typically a slam dunk for utilities and frameworks, the data access objects just didn’t “smell” right.  We ended up having session after session of design meetings to try and find the right way to share these data access components. When someone asked me why it was taking so long to iron out the shared entities, my response was quite simple, “Reuse is hard...”  And that’s when I realized, that while reuse is an awesome goal and we should strive to make code maintainable, often times you end up creating far more work for yourself than necessary by trying to force code to be reusable that inherently isn’t. Think about classes the times you’ve worked in a company where in the design session people fight over the best way to implement a class to make it maximally reusable, extensible, and any other buzzwordable.  Then think about how quickly that design became obsolete.  Many times I set out to do a project and think, “yes, this is the best design, I can extend it easily!” only to find out the business requirements change COMPLETELY in such a way that the design is rendered invalid.  Code, in general, tends to rust and age over time.  As such, writing reusable code can often be difficult and many times ends up being a futile exercise and worse yet, sometimes makes the code harder to maintain because it obfuscates the design in the name of extensibility or reusability. So what do I think are reusable components? Generic Utility classes – these tend to be small classes that assist in a task and have no business context whatsoever. Implementation Abstraction Frameworks – home-grown frameworks that try to isolate changes to third party products you may be depending on (like writing a messaging abstraction layer for publishing/subscribing that is independent of whether you use JMS, MSMQ, etc). Simplification and Uniformity Frameworks – To some extent this is similar to an abstraction framework, but there may be one chosen provider but a development shop mandate to perform certain complex items in a certain way.  Or, perhaps to simplify and dumb-down a complex task for the average developer (such as implementing a particular development-shop’s method of encryption). And what are less reusable? Application and Business Layers – tend to fluctuate a lot as requirements change and new features are added, so tend to be an unstable dependency.  May be reused across applications but also very volatile. Entities and Data Access Layers – these tend to be tuned to the scope of the application, so reusing them can be hard unless the abstract is very stable. So what’s the big lesson?  Reuse is hard.  In fact it’s damn hard.  And much of the time I’m not convinced we should focus too hard on it. If you’re designing a utility or framework, then by all means design it for reuse.  But you most also really set down a good versioning, release, and documentation process to maximize your chances.  For anything else, design it to be maintainable and extendable, but don’t waste the effort on reusability for something that most likely will be obsolete in a year or two anyway.

  Read the article

• MIX 2010 Covert Operations Day 4

  - by GeekAgilistMercenary

  The Microsoft Azure Cloud is looking pretty solid compared to just a few months ago.  The storage mechanisms in the cloud now are blobs, drives, tables, and queues.  Also, not to forget, is SQL Azure.  I won’t dive too much into that, as most will know what SQL Server is, and SQL Azure is pretty much just a hosted SQL Server instance. The blobs are generally geared toward holding binary type data, images and those types of things.  The tables are huge key value type stores.  The drives are VHD, which are virtual hard drives.  The queues are just queues used for workflow and also to store messages back and forth in a queue. These methods are accessible via REST, which makes application development against the storage services extremely easy.  This is a big plus point as REST services are a preferred way to connect and interact with data storage.  It also sets up Silverlight as a prime framework to utilize services. Day 4 I pretty much dedicated to reviewing these cloud services and finishing up work related development.  With that, I'm wrapping up my MIX 2010 blog coverage.  Now back to your regularly scheduled programming. Original entry.

  Read the article

• Proper management of PGPool II

  - by Cathy

  Currently I have a site, with one Postgres database server. It is just for a select number of users (less than ten) but it needs the maximum uptime possible. I would like some kind of automatic failover for the database. So I was thinking something like: one server running PGPool II, one running Postgres as master, one running Postgres as slave. But then, if wherever PGPool is running suddenly loses power (or dies, or whatever), there's a single point of failure and the whole thing goes down. Is there a solution, assuming that outsourcing this to someone else isn't possible?

  Read the article

• Adopting Technologies for the Sake of Technologies

  - by shiju

  Unlike other engineering industries, the software engineering industry is really lacking maturity. The lack of maturity can see in different aspects of entire software development life cycle. I think other engineering industries are well organised and structured with common, proven engineering practices. The software engineering industry is greatly a diverse industry with different operating systems, and variety of development platforms, programming languages, frameworks and tools. Now these days, people are going behind the hypes and intellectual thoughts without understanding their core business problems and adopting technologies and practices for the sake of technologies and practices and simply becoming a “poster child” of technologies and practices. Understanding the core business problem and providing best, solid solution with a platform neutral approach, will give you more business values and ROI, instead of blindly adopting technologies and tailor-made your applications for the sake of technologies and practices. People have been simply migrating their solutions in favour of new technologies and different versions of frameworks without any business need. The “Pepsi Challenge” in the Software Development  Pepsi Challenge marketing campaign of the 1980s was a popular and very interesting marketing promotion in which people taste one cup of Pepsi and another cup with Coca Cola. In the taste test, more than 50% of people were preferred Pepsi  over Coca Cola. The success story behind the Pepsi was more sweetness contains in the Pepsi cola. They have simply added more sugar and more people preferred more sweet flavour. You can’t simply identify the better one after sipping one cup of cola based on the sweetness which contains. These things have been happening in the software industry for choosing development frameworks and technologies. People have been simply choosing frameworks based on the initial sugary feeling without understanding its core strengths and weakness. The sugary framework might be more harmful when you develop real-world systems. There is not any silver bullet for solving all kind of problems and frameworks and tools do have strengths and weakness. So it would be better to understand their strength and weakness. And please keep in mind that you have to develop real apps to understand the real capabilities and weakness of a framework. Evaluating a technology based on few blog posts will harm your projects and these bloggers might be lacking real-world experience with the framework. The Problem with Align a Development Practice with Tools Recently I have observed a discussion in a group where one guy asked suggestions for practicing Continuous Delivery (CD) as part of the agile based application engineering. Then the discussion quickly went to using and choosing a Continuous Integration (CI) tool and different people suggested different Continuous Integration (CI) tools for simply practicing Continuous Delivery. If you have worked with core agile engineering practices, you could clearly know that the real essence of agile is neither choosing a tool nor choosing a process. By simply choosing CI tool from a particular vendor will not ensure that you are delivering an evolving software based on customer feedback. You have to understand the real essence of a engineering practice and choose a right tool for practicing it instead of simply focus on a particular tool for a practicing an development practice. If you want to adopt a practice, you need a solid understanding on it with its real essence where tools are just helping us for better automation. Adopting New Technologies for the Sake of Technologies The another problem is that developers have been a tendency to adopt new technologies and simply migrating their existing apps to new technologies. It is okay if your existing system is having problem  with a technology stack or or maintainability challenge with existing solution, and moving to new technology for solving the current problems. We have been adopting new technologies for solving new challenges like solving the scalability challenges when the application or user bases is growing unpredictably. Please keep in mind that all new technologies will become old after working with it for few years. The below Facebook status update of Janakiraman, expresses the attitude of a typical customer. For an example, Node.js is becoming a hottest buzzword in the software industry and many developers are trying to adopt Node.js for their apps. The important thing is that Node.js is a minimalist framework that does some great things for some problems, but it’s not a silver bullet. I have been also working with Node.js which is good for some problems, but really bad for choosing it for all kind of problems. By adopting new technologies for new projects is good if we could get real business values from it because newer framework would solve some existing well known problems and provide better solutions where it can incorporate good solutions for the latest challenges . But adopting a new technology for the sake of new technology is really bad idea. Another example is JavaScript is getting lot of attention so that lot of developers are developing heavy JavaScript centric web apps. First, they will adopt a client-side JavaScript MV* framework from AngularJS, Ember, Backbone etc, and develop a Single Page App(SPA) where they are repeating the mistakes we did in the past with server-side. The mistakes we did in the server-side is transforming to client-side. The problem is that people are just adopting new technologies, but not improving their solutions. I predict that many Single Page App will suck in the future. We need a hybrid approach where we should be able to leverage both server-side and client-side for developing next-generation web apps. The another problem is that if you like a particular framework, use it for all kind of apps. In the past, I know some Silverlight passionate guys were tried to use that framework for all kind of apps including larger line of business apps. And these days developers are migrating their existing Silverlight apps in favour of HTML5 buzzword. So the real question is, what is the business values we are getting from these apps when we are developing it for the sake of a particular technology instead of business need. The another problem is that our solutions consultants are trying to provide unnecessary solutions for the sake of a particular technology or for a hype. For an example, Big Data solutions are great for solving the problem of three Vs : volume, velocity and variety. But trying to put this for every application will make problems. Let’s say, there is a small web site running with limited budget and saying that we need a recommendation engine for the web site with a Hadoop based solution with a 16 node cluster, would be really horrible. If we really need a Hadoop based solution, got for it, but trying to put this for all application would be a big disaster. It would be great if could understand the core business problems first, and later choose a right framework for providing solutions for the actual business problem, instead of trying to provide so many solutions. The Problem with Tied Up to a Platform Vendor Some organizations and teams are tied up with a particular platform vendor where they don’t want to use any product other than their preferred or existing platform vendor. They will accept any product provided by the vendor regardless of its capability. This will lets you some benefits regards with integration and collaboration of different products provided by the same vendor, but it will loose your opportunity to provide better solution for your business problems. For a real world sample scenario, lot of companies have been using SAP for their ERP solutions. When they are thinking about mobility or thinking about developing hybrid mobile apps, they can easily find out a framework from SAP. SAP provides a framework for HTML 5 based UI development named SAPUI5. If you are simply adopting that framework only based for the preference of existing platform vendor, you might be loose different opportunities for providing better solution. Initially you might enjoy the sugary feeling provided by the platform vendor, but you have to think about developing apps which should be capable for solving future challenges. I am not saying that any framework is not good and I believe that all frameworks are good over another one for solving at least one problem. My point is that we should not tied up with any specific platform vendor unless your organization is having resource availability problems. Being Polyglot for Providing Right Solutions The modern software engineering industry is greatly diverse with different tools and platforms. Lot of open source frameworks and new programming languages have been releasing to the developer community, where choosing the right platform without any biased opinion, is really a difficult task. But it would really great if we could develop an attitude with platform neutral mindset and being a polyglot developer for providing better solutions based on the actual business problems. IMHO, we should learn a new programming language and a new framework every year. This will improve the quality of our developer capabilities and also improve the quality of our primary programming language skills. Being polyglot for individual developers and organizational teams will give you greater opportunity to your developer experience and also for your applications. Organizations can analyse their business problem without tied with any technology and later they can provide solutions by choosing different platform and tools. Summary    In this blog post, what I was trying to say that we should not tied up or biased with any development platform, technology, vendor or programming language and we should not adopt technologies and practices for the sake of technologies. If we are adopting a technology or a practice for the sake of it, we are simply becoming a “poster child” of the technology and practice. We should not become a poster child of other people’s intellectual thoughts and theories, instead of it we should become solutions developers and solutions consultants where we should be able to provide better solutions for the business problems. Being a polyglot developer is a good idea for improving your developer skills which lets you provide better solutions for the business problems. The most important thing is that we should become platform neutral developers where our passion should be for providing brilliant solutions. It would be great if we could provide minimalist, pragmatic business solutions. You can follow me on Twitter @shijucv

  Read the article

• Development environment to manage multiple Oracle databases

  - by jkohlhepp

  I am in an enterprise environment where we have applications that need to run against multiple Oracle databases. Developers may need to manage multiple vintages of these databases to support different test data or diagnose bugs against different versions of the code. Right now, we have a limited set of test environments set up on "real" Oracle servers within the data center. We juggle these among development and QA groups and there is a lot of conflicts and inefficiencies that arise because of it. I am taking a look at Oracle Express Edition which would allow me to spin up a local Oracle database. This is similar to the workflow I most often see with SQL Server. Devs work on their location machine until they are ready to integration and then they push their DB changes to integration / QA environments. However, from what I read it seems that Oracle XE only supports one database instance at a time. So if I have an application that utilizes two different databases, I can't have both of them running on my local machine. Is that correct? Does Oracle Standard or Personal editions get around this limitation? If I had one of those installed locally, how difficult would it be to get multiple databases working on the same development machine? How do dev shops handle developing against Oracle where they need to be using several different Oracle instances for their applications?

  Read the article

• New cloud development workflow using Github, Cloud9ide and CloudFoundry.

  - by weng

  So time is changing towards cloud development/computing. I'm trying to get the new "cloud" workflow based on the services I'm going to use: Github, Cloud9ide and CloudFoundry. Here is what is on my mind: Github acts like a central (main repo) just like yesterday's local filesystem. Every service will base it service upon this main repo. Workflow: Github: I create a new Github repo served as main repo for the project. Cloud9ide. I open my Github repo and write my tests and implementation (BDD/TDD). When I'm ready I save (commit) it to main repo on Github. X: A running instance of Jenkins detects someone has committed and fetches the latest commit, builds, deploys, tests (yeti and/or selenium) and reports if the tests were passed or not. If not, I make another commit til all tests are passing. X: I run the CloudFoundry commands to push the main Github repo to CloudFoundry's server and it will deploy my app automatically. What I'm still confused about is where this X environment will be. On a local server where I have to install Jenkins? Or could I install it on Cloud9ide (when java is supported) or will it be on another cloud service? Also, that X environment has to be able to fetch (clone) the Github repo and run the build scripts. And since the concept of Cloud9ide is very new and there haven't been any other predecessors I really wonder how the workflow will look like. We all know Github's workflow. We now know CloudFoundry's workflow (deploy/scale with a restful API/command line tool). But how Cloud9Ide will operate is still somewhat unclear to me. Someone on Cloud9ide mentioned that there will be buttons like deploy so I can deploy with one click. But that I guess will depend on what services that deploy process will hook up into etc. Could someone enlighten this cloud workflow topic and fill in the gaps. Thanks.

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >