Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 548/1663 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• Debian or CentOS?

  - by Tres

  I am looking at using either Debian or CentOS for a production server and I've heard mixed reviews of each one. I've heard CentOS performs better under load, however I am aware that Debian has a much larger package repository. Personally, I am partial to Debian since I am less familiar with Red Hat distros, but wanted to reach out on Server Fault to see which I really should be using. Any ideas? Thanks!

  Read the article

• Can't ping Ip over bridge

  - by tmn29a

  I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

  Read the article

• Problem installing CanonMF5880dn

  - by Paul

  Just got a CanonMF5880dn and cannot print to it from Suse 11.1 MacBook prints w/o issue ping 192.168.1.103 no problem cups sees it as Canon MF5880/MF5840 PCL at URI socket://192.168.1.103:9100 cups test print appears to submit and complete job but no action from printer Yast also seems to install printer correctly CQue2 also seems to install printer correctly all attempts to print yield same results: Suse indicates job processed correctly and completely but no printing happens. firewall is off http://192.168.1.103 in FF gives me the printer config menus correctly What have I failed to do?

  Read the article

• Recommendations for a PDF reader with "web browser"-like navigation.

  - by Tshepang

  Am looking for a PDF reader that can navigate PDF files like a web browser (IE, when I click a link that takes me to another part of the doc, I should be able to go back by pressing Ctrl+left arrow). I am using Debian.

  Read the article

• Failing SSHFS connection drags down the system

  - by skerit

  From time to time my sshfs mount fails. All programs using the mount freeze when it happens. I can't even ls anything or use nautilus. Is there a way to find out what's the cause and how to handle it? I've noticed regular SSH sessions to the server get their fair share of Write failed: broken pipe disconnects, too. If I wait long enough (and I'm talking about 20-ish minutes, here) it will auto reconnect and things start working again.

  Read the article

• Cant get squid proxy to work

  - by danielgratz

  i need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments): acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 21 acl Safe_ports port 443 acl Safe_ports port 70 acl Safe_ports port 210 acl Safe_ports port 1025-65535 acl Safe_ports port 280 acl Safe_ports port 488 acl Safe_ports port 591 acl Safe_ports port 777 acl CONNECT method CONNECT acl our_networks src 192.168.1.0/24 192.168.2.0/24 http_access allow our_networks http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all http_port 3128 hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache coredump_dir /var/spool/squid Then i just put my server's public ip and port 3128 into my web browsers proxy settings... but it isn't working i can't visit any website. Please help. Thanks.

  Read the article

• Configuring snedmail to forward mail for a specific domain to a specific mail server without using M

  - by aHunter

  I am new to sendmail and would like to configure sendmail to forward all mail for a specific email address to another internal mail server. I need it to ignore the MX records and only send it to the server I specify but am not sure which files to edit or how to configure the sendmail config. Is it sufficiant to add the server to the /etc/hosts and the /etc/mail/local-host-names files? Thanks in advance.

  Read the article

• Backup all plesk MySQL Databases to individual files

  - by Michael

  Hy, Because I'm new to shell scripting I need a hand. I currently backup all mydatabases to a single file, thing that makes the restore preaty hard. The second problem that my MySQL password dosen't work because of a Plesk bug and i get the password from "/etc/psa/.psa.shadow". Here is the code that I use to backup all my databases to a single file. mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` --all-databases | bzip2 -c > /root/21.10.2013.sql.bz2 I found some scripts on the web that backup each database to individual files but I don't know how to make them work for my situation. Here is a example script: for db in $(mysql -e 'show databases' -s --skip-column-names); do mysqldump $db | gzip > "/backups/mysqldump-$(hostname)-$db-$(date +%Y-%m-%d-%H.%M.%S).gz"; done Can someone help me make the script above work for my situation? Requirements: Backup each database to individual file using plesk password location.

  Read the article

• How to Exclude an URL for Apache Mod_proxy?

  - by Mughil

  We have two Apache server as front-end and 4 tomcat server as back-end configured using mod_proxy module as load balancer. Now, we want to exclude an single tomcat url from the mod_proxy load balancer. Is there any way or rule to exclude? Proxy Balancer Setting: <Proxy balancer://backend-cluster1> BalancerMember http://10.0.0.1:8080 loadfactor=1 route=test1 retry=10 BalancerMember http://10.0.0.2:8080 loadfactor=1 route=test2 retry=10 </Proxy>

  Read the article

• rsync --link-dest behaviour when run as sudo

  - by fotNelton

  In order to create regular backups, I'm using rsync together with --link-dest so as to create hard-links for unchanged files. For example: rsync -ax \ --partial --delete --delete-excluded --inplace \ --exclude-from=/tmp/temp_excludes \ --link-dest=/Volumes/Backup/current \ /Users /Volumes/Backup/2012-06-25 This works very well as long as I start the process from my normal user account. Though as soon as I start the process using sudo it behaves erradically, meaning that rsync copies all the unchanged files instead of hard-linking them. Since sudo modifies the environment, I've already also tried sudo -E in conjunction with making sure that my sudoers file has the corresponding option set. Well, that didn't work either. So, the question is, how can I run rsync using sudo? Whereas the above example only shows a backup of the Users directory, I also need to backup some system files that I can only access as root.

  Read the article

• Access Derby for CDP Server

  - by Skudd

  I am working on a project that requires accessing the Derby database behind a CDP Backup Server. From what limited research I've been able to complete, I have found that it is possible to access Derby databases over TCP, but I'm at a complete loss for this. I'm looking to connect via PHP eventually, but first I need to know if this is at all possible with an out-of-the-box CDP server. Answers are, as always, appreciated. Thanks!

  Read the article

• How do I make sure that BOTH my server and MYSQL have the same timezone?

  - by Alex

  Because when I create a time in Python scripts..I want it to match MYSQL's time. How do I make BOTH of them pacific time?

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• NSD reply from unexpected source

  - by Ximik

  I have server with NSD. There are MAIN_IP and ADD_IP. When I try to get IP of my site from server I have right output dig @localhost my_site.com But when I try to make this from my PC, I have dig @my_ns_server.com my_site.com ;; reply from unexpected source: MAIN_IP#53, expected ADD_IP#53 (ADD_IP is IP of my_ns_server.com) What should I do? UPD: My interfaces conf auto eth2 allow-hotplug eth2 iface eth2 inet static address xxx.xxx.xxx.234 netmask 255.255.255.252 network xxx.xxx.xxx.232 broadcast xxx.xxx.xxx.235 gateway xxx.xxx.xxx.233 dns-nameservers MY_ISP_IP dns-search MY_ISP_DOMAIN auto eth2:0 iface eth2:0 inet static address xxx.xxx.xxx.124 netmask 255.255.255.0 xxx.xxx.xxx is the same for all IPs

  Read the article

• lilo.conf questions

  - by Jack

  I use lilo, and have two different kernels. One is newer and use KMS with it. What I would like to do, is to be able to set vga=xxx for only one of the kernels. Is this possible? I would also like to be able to code into lilo.conf options that I pass on the commandline, but am unsure how to do this

  Read the article

• iptables logging not working?

  - by vps_newcomer

  OS: Ubuntu 10.04 Logging daemon: rsyslog For some reason i'm not getting any iptables logs, even thought i don't look through them very often i'd still like to get it working for the sake of it working XD Here is my /etc/ryslog.d/iptables.conf :msg, contains, "[IPTABLES]" -/var/log/iptables.log & ~ My iptables logging prefix is "[IPTABLES]" followed by whatever else (example [IPTABLES] Denied xyz) the /var/log/iptables.log file is being created, however its not getting any entries. I can see the logging entries in dmesg but not in syslog or messages. Whats going on? EDIT: My iptables logging rules: # logging limit LoggingLimit=5/min LoggingPrefix=IPTABLES # Logging chain iptables -N LOG_REJECT iptables -A LOG_REJECT -j LOG # join INPUT to LOG_REJECT iptables -A INPUT -j LOG_REJECT # logging iptables -A LOG_REJECT -p tcp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied TCP: " #--log-level 7 iptables -A LOG_REJECT -p udp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied UDP: " #--log-level 7 iptables -A LOG_REJECT -p icmp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied ICMP: " #--log-level 7 Update: I found a thread that has the same symptoms as i do, apparently is a kernel bug. I am using a VPS so could anyone point me on how to upgrade my kernel or apply a workaround? I couldn't find a 2.6.34 kernel listed in apt-cache. Thread: http://www.linode.com/forums/viewtopic.php?t=5533

  Read the article

• How to know that my IP is invalid

  - by PeterMmm

  I have a script running that will start up an interface with a new IP. If the script comes up with an IP that is already in use i am in trouble. Is it possible that the script set up the new Ip, detects that this IP is already in use and then check the next one, until it finds an ip that works ? B=192.168.1. I=1 while [ "$I" != "256" ] do ifconfig eth0:1 $B.$I # check here that IP is Ok ! let "I=I+1" done

  Read the article

• Traffic shaping L2TP/IPsec VPN (via accounts not connection)

  - by Cromulent

  I need to be able to control the amount of bandwidth a specific user account can use on a VPN connection. One account I want to be able to use the VPN with no restrictions and another account I want to limit to a reasonable amount of bandwidth (say 10GB or so a month). I'm aware that you can traffic shape individual connections but that does not quite solve the problem as the limited account can just disconnect and reconnect to get a new connection. I need to be able to limit bandwidth on a login basis for a given period of time (monthly limit). I'm really not that familiar with traffic shaping in general so any advice would be appreciated. Thank you.

  Read the article

• What kind of issues would occur if resolve.conf had no dns servers set?

  - by Stuart Woodward

  I want to create a server for a customer and have that customer finish the configuration for themselves. It was been decided that rather than setting default DNS servers (i.e. something like Google's) that the customer should enter the information by themselves. I assume that the customer is technically competent enough to do this. If however they forget or neglect to set this up they might spend some time trying to figure out what is wrong and eventually contact support. (In this case, I think that setting a default might have been better.) Apart from the obvious inability to resolve hosts, what other issues might they face until they have set valid dns servers in resolve.conf?

  Read the article

• Ubuntu 64-bit vs 32-bit

  - by tukushan

  Is it worth installing the Ubuntu 9.10 64-bit version over the 32-bit x86 version? I will get the ability to address more than 4 GB of memory, but other than that, how does the 64-bit version fare in terms of performance and stability?

  Read the article

• Raid 5 GPT Partitioning

  - by user39325

  I have a Dell Poweredge r710 server with five 1 TB disks. All of them are in RAID 5. I was trying to install Centos but it says "Your boot partition is on disk using GPT Partition..." I read somewhere that centos can't install on a disk larger than 2TB, so I made some partitions smaller, but it's not working. PS, I am going to install Proxmox on that, but Proxmox also won't accept disks larger than 2TB.

  Read the article

• Mail Secure & Stable Open Source Mail Server

  - by Fanar ALHAYALI

  I have asked question on http://stackoverflow.com/questions/9868426/i-need-to-know-which-email-server-i-have-to-use and someone tell me my question would be better on serverfault. I know that this is a common question and asked many times. but there are so many available mail servers that i am not able to decide the one. Kindly tell that which is the Secure, Stable and fast open source mail server for Centos or Redhat Server. Is there any guide which can be used to deploy the mail server with all its components e.g. smtp, pop3, imap, spam, calender server, antivirus, DNS Setting. Currently I'm using sun messaging V6 which installed on Solaris 10 and my boss ask me to make a report for the best mail server today in the marketing? I tried to have a look on Google but I couldn't find interesting information for my report. Any advice would be appreciated.

  Read the article

• Multiple network cards, controlling where my traffic goes

  - by thefinn93

  This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

  Read the article

• Running two Magentos installations, one of which has 3 stores set up as multi-store. Which server?

  - by Pedro Peixoto

  I want to run 4 Magento stores in 2 different installations. 1 is a standalonne installation with 3 languages. The other is a multi-store with 3 different online stores in different domains. At the moment we have a VPS with 1GB memory, would that be enough? I ask because I've finished the standalone store and already put it online, and the server is already running on 62% memory. The ideal would be that this is enough as my company wouldn't like to move to a Dedicated Server (as it involves costs). I'm sure I can try to optimize Magento to run on lower memory (I'm expecting visits averaging 2000/day on all sites), if I could have some tips on the best way to do that Id appreciate it too.

  Read the article

• How to restrict all services to single domain in Ubuntu?

  - by harold

  Someone has pointed an unknown domain to my server's IP address likely via A records. I would like to reject access to ALL services (httpd, ssh, mail, etc.) from this domain and only allow requests from my domain. I want to make it so when I connect to that domain it's completely rejected from my server. I can disallow access from HTTP by changing my web server settings, but I want to do this for every single type of connection. How can I do this?

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >