android virtual device - Page 551

How do I get my Apache virtual hosts working?

- by elliot100

I'm trying to set up virtual hosts for local development and can't seem to get it working. I have this in my httpd.conf: NameVirtualHost * <VirtualHost *> ServerName localhost DocumentRoot C:/Users/Elliot/dev/UniServer/www </VirtualHost> <VirtualHost *> ServerName drupal.dev DocumentRoot C:/Users/Elliot/dev/UniServer/www/drupal.dev/httpdocs </VirtualHost> and this in C:\Windows\System32\drivers\etc\hosts: 127.0.0.1 localhost 127.0.0.1 drupal.dev http://localhost resolves OK, http://drupal.dev/ does not. Any ideas welcomed...

Read the article

GF 3.0.1 + Virtual Server: www.myhost.com:8080/projectname-war => www.myhost.com. How?

- by Harry Pham

EDIT I need to change www.myhost.com:8080/myproject-war to www.myhost.com. Here is what I've been trying: I configurate the Virtual Server: server. I have still have default Network Listeners to be http-listener-1 and http-listner-2. I change the Default Web Module to ScholarActive#ScholarActive-war.war (The only option in the drop down list, since I only deploy 1 application). For the docroot, I try this ${com.sun.aas.instanceRoot}/applications/ScholarActive/ScholarActive-war_war or this ${com.sun.aas.instanceRoot}/applications/ScholarActive/ Both does not work. What does docroot need to point to, for this to work? what I try to do is: when I type localhost:8080/ScholarActive-war, then my application load, I want to make so that if I type locahost:8080, it will load the app as well, then what left is changed the port to 80. But no luck. Any Idea?

Read the article

How to nest a Location directive inside a virtual host config?

- by Josh

I am trying nest a Location directive inside a virtual host config like this: <VirtualHost *:80> ServerName mysite.com DocumentRoot /home/deployer/apps/mysite/current/public ErrorLog /var/log/prod.log <Location "/shop"> DocumentRoot /home/deployer/apps/mysite_shop/current/public ErrorLog /var/log/prod.log </Location> </VirtualHost> What I want to do is go to mysite.com/shop, and point it to another application. Is this possible? Is there another method of doing this? I get an error because apparently Location directives do not accept DocumentRoot. Thanks.

Read the article

Optimum php.ini and my.cnf settings for a small Drupal 7 site on a virtual server

- by the other dude

I looking for advice on how to set up the default configuration of php.ini and my.cnf for a small site (100 pages) with very little traffic (300 visitors per day). All pages have a bit of text, some images, no video, no audio, no flash/silverlight, very little javascript and jquery. For tracking I'm using GA and Piwik. The main site database is around 50MB. The site is hosted on a virtual server with 20GB RAM and 6 vCPUs so there's hopefully a lot of muscle to make it run very fast. I don't know much about tweaking php and mysql settings and would appreciate it if your answers can be as detailed as possible. Thanks

Read the article

Unrecognized option: -o Could not create the Java virtual machine.

- by Kerubu

I've got an unusual build error when using Buildroot to create an image for my Phidget SBC. It's unusual because it occurs ONLY on my development laptop and NOT on my general use laptop even though I am using EXACTLY the same Builroot environment as published by Phidgets themselves. When I try to create my Buildroot image I get the following error when it attempts to compile GNU classpath: Making all in tools make[2]: Entering directory `/home/xxxx/buildroot_phidgetsbc/buildroot-phidgetsbc_1.0.4.20111028/output/build/classpath-0.98/tools' /bin/mkdir -p classes asm /bin/mkdir -p ../tools/generated/gnu/classpath/tools/gjdoc/expr java -classpath antlr.Tool -o ../tools/generated/gnu/classpath/tools/gjdoc/expr/ \ ./gnu/classpath/tools/gjdoc/expr/java-expression.g Unrecognized option: -o Could not create the Java virtual machine. make[2]: *** [tools.zip] Error 1 The only difference I can possibly thing of is the different Linux (Ubuntu) versions I am using on each laptop. Also I cannot find a -o option documented for Java and don't understand why it works on one laptop but not the other. Any suggestions would be helpful.

Read the article

Why do virtual memory addresses for linux binaries start at 0x8048000?

- by muteW

Disassembling an ELF binary on a Ubuntu x86 system I couldn't help but notice that the code(.text) section starts from the virtual address 0x8048000 and all lower memory addresses seem to be unused. This seems to be rather wasteful and all Google turns up is either folklore involving STACK_TOP or protection against null-pointer dereferences. The latter case looks like it can be fixed by using a single page instead of leaving a 128MB gap. So my question is this - is there a definitive answer to why the layout has been fixed to these values or is it just an arbitrary choice?

Read the article

How to map a virtual directory to a website in VS?

- by salvationishere

I am developing a C# VS 2008 website, trying to add a Master file. I created a virtual directory in IIS housing the "Master" folder, containing the Master files. Now how do I reference these files from my website in VS? One problem is I do not know where I need to publish this Master folder to. Other problem is I do not know how to reference this Master file in my aspx Page directive. FYI, this master folder is physically located outside of c:\inetpub\ in a totally separate file location. Is this a problem?

Read the article

Force to call virtual base function instead of the overriden one.

- by Roberto Sebestyen

In the following example "Test that v1 function was called" fails. Is there a way to force call the base implementation of "RunFunction" through an instance of "class V2" ?? class V1 { public virtual string RunFunction() { return "V1"; } } class V2 : V1 { public override string RunFunction() { return "V2"; } } [Test] public void TestCall() { var v1 = (V1)new V2(); var v2 = new V2(); Assert.IsTrue(v1.RunFunction() == "V1", "Test that v1 function was called"); Assert.IsTrue(v2.RunFunction() == "V2", "Test that v2 function was called"); }

Read the article

What's up with LDoms: Part 2 - Creating a first, simple guest

- by Stefan Hinker

Welcome back! In the first part, we discussed the basic concepts of LDoms and how to configure a simple control domain. We saw how resources were put aside for guest systems and what infrastructure we need for them. With that, we are now ready to create a first, very simple guest domain. In this first example, we'll keep things very simple. Later on, we'll have a detailed look at things like sizing, IO redundancy, other types of IO as well as security. For now,let's start with this very simple guest. It'll have one core's worth of CPU, one crypto unit, 8GB of RAM, a single boot disk and one network port. CPU and RAM are easy. The network port we'll create by attaching a virtual network port to the vswitch we created in the primary domain. This is very much like plugging a cable into a computer system on one end and a network switch on the other. For the boot disk, we'll need two things: A physical piece of storage to hold the data - this is called the backend device in LDoms speak. And then a mapping between that storage and the guest domain, giving it access to that virtual disk. For this example, we'll use a ZFS volume for the backend. We'll discuss what other options there are for this and how to chose the right one in a later article. Here we go: root@sun # ldm create mars root@sun # ldm set-vcpu 8 mars root@sun # ldm set-mau 1 mars root@sun # ldm set-memory 8g mars root@sun # zfs create rpool/guests root@sun # zfs create -V 32g rpool/guests/mars.bootdisk root@sun # ldm add-vdsdev /dev/zvol/dsk/rpool/guests/mars.bootdisk \ mars.root@primary-vds root@sun # ldm add-vdisk root mars.root@primary-vds mars root@sun # ldm add-vnet net0 switch-primary mars That's all, mars is now ready to power on. There are just three commands between us and the OK prompt of mars: We have to "bind" the domain, start it and connect to its console. Binding is the process where the hypervisor actually puts all the pieces that we've configured together. If we made a mistake, binding is where we'll be told (starting in version 2.1, a lot of sanity checking has been put into the config commands themselves, but binding will catch everything else). Once bound, we can start (and of course later stop) the domain, which will trigger the boot process of OBP. By default, the domain will then try to boot right away. If we don't want that, we can set "auto-boot?" to false. Finally, we'll use telnet to connect to the console of our newly created guest. The output of "ldm list" shows us what port has been assigned to mars. By default, the console service only listens on the loopback interface, so using telnet is not a large security concern here. root@sun # ldm set-variable auto-boot\?=false mars root@sun # ldm bind mars root@sun # ldm start mars root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 8 7680M 0.5% 1d 4h 30m mars active -t---- 5000 8 8G 12% 1s root@sun # telnet localhost 5000 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ~Connecting to console "mars" in group "mars" .... Press ~? for control options .. {0} ok banner SPARC T3-4, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.33.1, 8192 MB memory available, Serial # 87203131. Ethernet address 0:21:28:24:1b:50, Host ID: 85241b50. {0} ok We're done, mars is ready to install Solaris, preferably using AI, of course ;-) But before we do that, let's have a little look at the OBP environment to see how our virtual devices show up here: {0} ok printenv auto-boot? auto-boot? = false {0} ok printenv boot-device boot-device = disk net {0} ok devalias root /virtual-devices@100/channel-devices@200/disk@0 net0 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases We can see that setting the OBP variable "auto-boot?" to false with the ldm command worked. Of course, we'd normally set this to "true" to allow Solaris to boot right away once the LDom guest is started. The setting for "boot-device" is the default "disk net", which means OBP would try to boot off the devices pointed to by the aliases "disk" and "net" in that order, which usually means "disk" once Solaris is installed on the disk image. The actual devices these aliases point to are shown with the command "devalias". Here, we have one line for both "disk" and "net". The device paths speak for themselves. Note that each of these devices has a second alias: "net0" for the network device and "root" for the disk device. These are the very same names we've given these devices in the control domain with the commands "ldm add-vnet" and "ldm add-vdisk". Remember this, as it is very useful once you have several dozen disk devices... To wrap this up, in this part we've created a simple guest domain, complete with CPU, memory, boot disk and network connectivity. This should be enough to get you going. I will cover all the more advanced features and a little more theoretical background in several follow-on articles. For some background reading, I'd recommend the following links: LDoms 2.2 Admin Guide: Setting up Guest Domains Virtual Console Server: vntsd manpage - This includes the control sequences and commands available to control the console session. OpenBoot 4.x command reference - All the things you can do at the ok prompt

Read the article

WhatsApp & Tasker for Android – Read & Write messages

- by Shaurya Anand

So, I finally gave up on all my previous the Microsoft Mobile/Phone OS devices and made my switch to Android this year. I am using my Samsung Galaxy Note GT-N7000 with CyanogenMod 9.1.0 (http://get.cm/get/jenkins/7086/cm-9.1.0-n7000.zip) and ClockworkMod 6.0.1.2 (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-n7000.zip) since August this year and I am so happy with the performance and the flexibility it offers me. As a software developer by profession, I would expect most of my gadget to be highly customizable and programmable (one time or at intervals) to suit my needs as close as it can. I was introduced to Automation for Android – Tasker (https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm&hl=en) via reddit (http://www.reddit.com/r/tasker) and the word ‘automation’ was enough for me to dive right into this app. Only automation that I did earlier was switching profiles depending on location on there phones. And now, just imagine a complete set of possibilities that can be automate on the phone or via the phone. I did my research and found a couple of other tools that do the same/as close as what Tasker can do and few of them are even free. There’s one even by Microsoft called on{X} (https://play.google.com/store/apps/details?id=com.microsoft.onx.app&hl=en). Microsoft’s on{X} really caught my eye. You can write code for your phone on the web application by them, deploy it on your phone and even trace the flow all using your PC. Really brilliant, I love the fact that it’s all JavaScript. Here comes the but, it is still very very young and it’s policy of accessing my News Feed on Facebook is not something that I can not digest. On{X} is good, but as I said earlier, the API is not very mature and hence, I gave up on it. I bought Tasker, the best 5,00 € I spent in ages and I want to talk about it in this post. I am still a “noob” while operating this tool, but I tried my shot at automating WhatsApp (https://play.google.com/store/apps/details?id=com.whatsapp&hl=en), a popular messenger for various platform. The requirement for the automation is that, if I send a WhatsApp ‘wru’ message to the phone, it should respond back giving the location and battery level of my phone. It could be useful, if you like to locate your misplaced phone or automatically reply to your partner/friend, honestly, I don’t know what you will use it - through this post, I am just introducing automating WhatsApp using Tasker. Before we begin, the following script only works when your phone is rooted as we will be accessing the WhatsApp database and type some special characters like ‘:’. Let’s follow the code line by line: Profile: Location request from XYZ. (12) // Name of your profile. Event: Notification [ Owner Application:WhatsApp Title:* ] // When a new notification comes from WhatsApp, this event is fired. Read the end note, if you face problems with Chrome app after enabling Tasker accessibility. Enter: A1: Run Shell [ Command:sqlite3 // We will access the WhatsApp database and check if the message comes from designated phone number or not. We mustn’t reply to every message. /data/data/com.whatsapp/databases/msgstore.db "SELECT _id, data FROM messages WHERE key_from_me='0' AND key_remote_jid LIKE '%XXXXXXXXXXX%' // Replace XXXXXXXXXXX with the phone number of your message sender. ORDER BY _id DESC LIMIT 1;" Timeout (Seconds):10 Use Root:On Store // I made a timeout for 10 seconds, if in case WhatsApp is busy accessing the database. Result In:%WHATSAPP_CURRREQ ] // Store the read Id and the last message on to the variable %WHATSAPP_CURRREQ A2: If [ %WHATSAPP_CURRREQ ~R .*[wW][rR][uU].* ] // Check if the pattern of the message is correct and we are all set to send the location. A3: If [ %WHATSAPP_CURRREQ !~ %WHATSAPP_LASTREQ ] // Verify that the message is different from the last request. Remember every message has a unique Id. A4: Notify [ Title:WhatsApp location request... Text:Sending location // Just a notification that the location message is being prepared. to Krati Gupta... Icon:<icon> Number:0 Permanent:On Priority:3 ] // Make a note it is a permanent notification, we will clear it later. A5: Secure Settings [ Configuration:Pattern Lock Disabled // I am disabling the pattern lock, that I use using the plugin Secure Settings. Package:com.intangibleobject.securesettings.plugin Name:Secure // You can download the plugin from here: https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin&hl=en Settings ] A6: Secure Settings [ Configuration:Keyguard Disabled // Disable the keygaurd, it is useful, when your phone is on lock and you want to automate everything, even the typing. Package:com.intangibleobject.securesettings.plugin Name:Secure Settings ] A7: Secure Settings [ Configuration:GPS Enabled // Pretty clear, turn on the GPS and get location at A8 Package:com.intangibleobject.securesettings.plugin Name:Secure Settings ] A8: AutoShortcut [ Configuration:WhatsApp: Some One // I am using AutoShortcut plugin (https://play.google.com/store/apps/details?id=com.joaomgcd.autoshortcut) to start WhatsApp with the indented recipient. Package:com.joaomgcd.autoshortcut Name:AutoShortcut ] // Replace Some One, actually choose it from the plugin, the right recipient. A9: Get Location [ Source:Any Timeout (Seconds):30 Continue Task // I am getting the location, timeout is 30 seconds, adjust it accordingly. Immediately:Off Keep Tracking:Off ] A10: Secure Settings [ Configuration:Screen Dim // Now, this extension of the plugin Secure Settings, wakes your device so that you can type out the string on the WhatsApp app. 5 Seconds Package:com.intangibleobject.securesettings.plugin Name:Secure Settings ] A11: Run Shell [ Command:input text // Now, I am using the shell script to type the text to the window, because the ‘:’ while not be typed from the Type task in Tasker. LOCATION:maps.google.com/maps?q=%LOC Timeout (Seconds):0 Use Root:On // And also, this is way faster, but remember you need root for this, not for the other way of typing. Store Result In: ] A12: Dpad [ Button:Right Repeat Times:1 ] // Focus the Send button A13: Dpad [ Button:Press Repeat Times:1 ] // And press it. A14: Dpad [ Button:Left Repeat Times:1 ] // Get back to the typing box. A15: Run Shell [ Command:input text LOCATION_ACCURACY:%LOCACC Timeout (Seconds):0 Use Root:On Store Result In: ] A16: Dpad [ Button:Right Repeat Times:1 ] A17: Dpad [ Button:Press Repeat Times:1 ] A18: Dpad [ Button:Left Repeat Times:1 ] A19: Run Shell [ Command:input text BATTERY_LEVEL:%BATT% Timeout // I am adding Battery level in my case as well. (Seconds):0 Use Root:On Store Result In: ] A20: Dpad [ Button:Right Repeat Times:1 ] A21: Dpad [ Button:Press Repeat Times:1 ] A22: Variable Set [ Name:%WHATSAPP_LASTREQ To:%WHATSAPP_CURRREQ Do // And now, we say, request is done. Maths:Off Append:Off ] A23: Button [ Button:Back ] // I am exiting the WhatsApp nicely and not killing it. If you are the murderer kind, kill it, just know, you don’t have any place in the heaven. A24: Button [ Button:Back ] A25: Notify Cancel [ Title: Warn Not Exist:Off ] // Remove the permanent notification. A26: Notify [ Title:WhatsApp location request Text:Location sent // Make a temporary notification, and say, location is sent. successfully. Icon:<icon> Number:0 Permanent:Off Priority:3 ] A27: Secure Settings [ Configuration:GPS Disabled // Disable all the horrible things we turned on earlier. Package:com.intangibleobject.securesettings.plugin Name:Secure Settings ] A28: Secure Settings [ Configuration:Pattern Lock Enabled Package:com.intangibleobject.securesettings.plugin Name:Secure Settings ] A29: Secure Settings [ Configuration:Keyguard Enabled Package:com.intangibleobject.securesettings.plugin Name:Secure Settings ] A30: End If A31: End If Download this Task from here: http://db.tt/9vRmbhyb That’s it in the above small example – you can read/write messages from/to WhatsApp app. I am using n7000-cm9.1-cwr6. Oh yea, and if you are having the Talkback auto enabled for Chrome browser, you need to turn Off the Web scripts to run. Tasker is amazing, I have automated a lot of tasks using this tool. I will share a few none generic ones with you in my coming post here.

Read the article

Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

- by Richard Rotter

Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

Read the article

Best Practices - which domain types should be used to run applications

- by jsavit

This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) One question that frequently comes up is "which types of domain should I use to run applications?" There used to be a simple answer in most cases: "only run applications in guest domains", but enhancements to T-series servers, Oracle VM Server for SPARC and the advent of SPARC SuperCluster have made this question more interesting and worth qualifying differently. This article reviews the relevant concepts and provides suggestions on where to deploy applications in a logical domains environment. Review: division of labor and types of domain Oracle VM Server for SPARC offloads many functions from the hypervisor to domains (also called virtual machines). This is a modern alternative to using a "thick" hypervisor that provides all virtualization functions, as in traditional VM designs, This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, which further improves reliability and security. In this architecture, management and I/O functionality are provided within domains. Oracle VM Server for SPARC does this by defining the following types of domain, each with their own roles: Control domain - management control point for the server, used to configure domains and manage resources. It is the first domain to boot on a power-up, is an I/O domain, and is usually a service domain as well. I/O domain - has been assigned physical I/O devices: a PCIe root complex, a PCI device, or a SR-IOV (single-root I/O Virtualization) function. It has native performance and functionality for the devices it owns, unmediated by any virtualization layer. Service domain - provides virtual network and disk devices to guest domains. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI busses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain, which is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure: guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device doesn't result in an application outage. This is also used for "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O busses, so there is more I/O capacity that can be used for applications. Increased T-series server capacity made it attractive to run more vertical applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the SPARC SuperCluster engineered system, announced a year ago at Oracle OpenWorld. In SPARC SuperCluster, I/O domains are used for high performance applications, with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is the introduction of Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. A domain with either a DIO or SR-IOV device is an I/O domain. In summary: not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O go guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm has to be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. I/O domains can be used for applications with high performance requirements. This is used to great effect in SPARC SuperCluster and in general T4 deployments. Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV) make this more attractive by giving direct I/O access to more domains. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect other domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so an interruption of service in the service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. SPARC SuperCluster use the control domain for applications, but it is an exception: it's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity T-series servers have made it more attractive to use them for applications with high resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide higher performance for critical applications.

Read the article

Displaylink USB show "Logo / Loading" on monitor

- by Ken Le

I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # #Option "AGPMode" # #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # #Option "GARTSize" # #Option "RingSize" # #Option "BufferSize" # #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # #Option "DepthBits" # #Option "PCIAPERSize" # #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # #Option "RageTheatreCrystal" # #Option "RageTheatreTunerPort" # #Option "RageTheatreCompositePort" # #Option "RageTheatreSVideoPort" # #Option "TunerType" # #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

Read the article

Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

- by Ritwik

I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

Read the article

How to use BCDEdit to dual boot Windows installations?

- by Ian Boyd

What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

Read the article

Recover RAID 5 data after created new array instead of re-using

- by Brigadieren

Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

Read the article

Managing BES Software Configurations

- by DaveJohnston

Hi, I am having problems with OTA deployment of a bespoke application that we have written. I have read loads of threads elsewhere and I have got mixed help, but for my particular case none of it has really helped. So I thought I would explain my exact situation and try and get some help here. I am running BES version 4.1.5 (Bundle 79) for Microsoft Exchange. The application we have written is split into 5 modules, which we control, and another 4 modules which are 3rd party libraries that we require. So for our modules the version numbers are regularly changing but for the others they are pretty much always going to remain the same. We have an alx file set up that identifies all of the files required and in fact I am able to create a software configuration and deploy the application with no problems. What I am trying to do however is maintain multiple versions of our application on the BES and be able to select which version I want to deploy to each user. I have tried this a number of ways (as I said I have read lots of other threads with solutions to this problem) but each seems to come with its own problem. First of all I tried just creating different configurations for each version of the application, but because they each had the same application ID the BES informed me that I couldn't do this. I read somewhere that the solution was to create a second shared folder (e.g. \Program Files\Common Files\RIM) and add the apploader stuff and the new version of the app to this folder. I could then create a second software configuration that would have the same application ID. The result of this seemed promising to start with. When I changed the config that was assigned to a user the new version was pushed out fine. But afterwards the BES reported that the device state was invalid, which meant I couldn't push anything else until I reactivated the device. I guess this is because the first config was never set to disallowed so the old version wasn't removed and the device essentially reported that it had multiple versions of the same application installed. The next suggestion I got was to change the application ID for each version, e.g. to include the version number. This meant that each version of the application could be included in a single configuration and I could set one to disallowed and the other to required. Initially this worked and the first version was deployed. But when I switched (i.e. the old version became disallowed and the new version required) the BES reported upgrade required and removed the old version. The device restarts and the old version is gone but the new version is not pushed out. I checked the BES and it still said Upgrade Required. I checked the log files and found: [40000] (11/12 09:50:27.397):{0xEB8} {[email protected], PIN=1234, UserId=2}SCS::PollDBQueueNewRequests - Queuing POLL_FOR_MISSING_APPS request [40000] (11/12 09:50:28.241):{0xE9C} RequestHandler::PollForMissingApps: Starting Poll For Missing Apps. [40304] (11/12 09:50:28.241):{0xE90} WorkerThreadPool:: ThreadProc(): Thread released with empty queue [40000] (11/12 09:50:28.241):{0xE9C} SCS::RemoveAppDeliveryRequests - No App Delivery Requests purged for User id 2 [30000] (11/12 09:50:28.960):{0xE9C} Discard duplicate module group "name" on device [30000] (11/12 09:50:28.960):{0xE9C} Discard duplicate module group "name" on device [40000] (11/12 09:50:29.163):{0xE9C} RequestHandler::PollForMissingApps: Completed Poll For Missing Apps, elapsed time 0.922 seconds. (You will notice I have removed actual names and email addresses etc for privacy reasons. But one question: where does the name of the module group come from? In my case it is close to the application ID but doesn't include the version number that I added at the end in order to get it to work. Is that information embedded in a COD file or something??) So it is reporting a duplicate module group on the device? What does this mean? I checked the device properties (as reported on the BES) and it confirms that the modules with the old version numbers are still present on the device. So the application has been removed but not the modules?? I checked the device and the modules are gone, so it is just the BES reporting that they are still there?? I checked the database and it has the modules in questions in the SyncDeviceMgmt table. If I delete these from the DB the BES changes to report Install Required, and low and behold the new version of the app is pushed out. So at the end of all that, my question is: does anyone have any other suggestions of how to handle upgrading our bespoke application OTA from the BES? Or can anyone point out something I am doing wrong in what I described above that might solve the problems I am having? I guess the question is why does the database maintain that the modules are on the device after they are removed? Thanks for any help you can provide.

Read the article

Begin the Clone Wars Have!

- by Antony Reynolds

Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5. That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs. However I also wanted to run some testing of FMW with the database running on a separate physical machine. So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware. Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again! Life is too short! #2 is probably the safest way of doing things. VirtualBox allows you to clone a disk image for use in a separate machine. However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things. It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside. However this is not a problem for me as long as I remember to keep all threee images together. So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use. We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment. In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software. I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle. But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine. Adapter 1 was a standard NAT mapping. This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway. This is the same as the existing configuration. The second adapter I created as a bridged adapter. This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other. It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network. Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM. If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network. You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine. If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk. I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged. Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration. In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address. I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS. So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP. There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101 vboxdb.oracle.com vboxdb # Added by NetworkManager 10.0.2.15 vboxdb.oracle.com vboxdb # Added by NetworkManager 10.0.3.102 vboxfmw.oracle.com vboxfmw # Added by NetworkManager 127.0.0.1 localhost.localdomain localhost ::1 vboxdb.oracle.com vboxdb localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname: (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control. I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”. On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used. As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain. When creating the domain I can point it at the second machine which is running the database. I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them. This is because we want to keep the database in sync with the middleware. One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines. I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image. Just remember what machine holds state and what are the consequences of taking a snapshot.

Read the article

Windows Azure Evolution - Web Sites (aka Antares) Part 1

- by Shaun

This is the 3rd post of my Windows Azure Evolution series, focus on the new features and enhancement which was alone with the Windows Azure Platform Upgrade June 2012, announced at the MEET Windows Azure event on 7th June. In the first post I introduced the new preview developer portal and how to works for the existing features such as cloud services, storages and SQL databases. In the second one I talked about the Windows Azure .NET SDK 1.7 on the latest Visual Studio 2012 RC on Windows 8. From this one I will begin to introduce some new features. Now let’s have a look on the first one of them, Windows Azure Web Sites. Overview Windows Azure Web Sites (WAWS), as known as Antares, was a new feature still in preview stage in this upgrade. It allows people to quickly and easily deploy websites to a highly scalable cloud environment, uses the languages and open source apps of the choice then deploy such as FTP, Git and TFS. It also can be integrated with Windows Azure services like SQL Database, Caching, CDN and Storage easily. After read its introduction we may have a question: since we can deploy a website from both cloud service web role and web site, what’s the different between them? So, let’s have a quick compare. CLOUD SERVICE WEB SITE OS Windows Server Windows Server Virtualization Windows Azure Virtual Machine Windows Azure Virtual Machine Host IIS IIS Platform ASP.NET WebForm, ASP.NET MVC, WCF ASP.NET WebForm, ASP.NET MVC, PHP Language C#, VB.NET C#, VB.NET, PHP Database SQL Database SQL Database, MySQL Architecture Multi layered, background worker, message queuing, etc.. Simple website with backend database. VS Project Windows Azure Cloud Service ASP.NET Web Form, ASP.NET MVC, etc.. Out-of-box Gallery (none) Drupal, DotNetNuke, WordPress, etc.. Deployment Package upload, Visual Studio publish FTP, Git, TFS, WebMatrix Compute Mode Dedicate VM Shared Across VMs, Dedicate VM Scale Scale up, scale out Scale up, scale out As you can see, there are many difference between the cloud service and web site, but the main point is that, the cloud service focus on those complex architecture web application. For example, if you want to build a website with frontend layer, middle business layer and data access layer, with some background worker process connected through the message queue, then you should better use cloud service, since it provides full control of your code and application. But if you just want to build a personal blog or a business portal, then you can use the web site. Since the web site have many galleries, you can create them even without any coding and configuration. David Pallmann have an awesome figure explains the benefits between the could service, web site and virtual machine. Create a Personal Blog in Web Site from Gallery As I mentioned above, one of the big feature in WAWS is to build a website from an existing gallery, which means we don’t need to coding and configure. What we need to do is open the windows azure developer portal and click the NEW button, select WEB SITE and FROM GALLERY. In the popping up windows there are many websites we can choose to use. For example, for personal blog there are Orchard CMS, WordPress; for CMS there are DotNetNuke, Drupal 7, mojoPortal. Let’s select WordPress and click the next button. The next step is to configure the web site. We will need to specify the DNS name and select the subscription and region. Since the WordPress uses MySQL as its backend database, we also need to create a MySQL database as well. Windows Azure Web Sites utilize ClearDB to host the MySQL databases. You cannot create a MySQL database directly from SQL Databases section. Finally, since we selected to create a new MySQL database we need to specify the database name and region in the last step. Also we need to accept the ClearDB’s terms as well. Then windows azure platform will download the WordPress codes and deploy the MySQL database and website. Then it will be ready to use. Select the website and click the BROWSE button, the WordPress administration page will be shown. After configured the WordPress here is my personal web blog on the cloud. It took me no more than 10 minutes to establish without any coding. Monitor, Configure, Scale and Linked Resources Let’s click into the website I had just created in the portal and have a look on what we can do. In the website details page where are five sections. - Dashboard The overall information about this website, such as the basic usage status, public URL, compute mode, FTP address, subscription and links that we can specify the deployment credentials, TFS and Git publish setting, etc.. - Monitor Some status information such as the CPU usage, memory usage etc., errors, etc.. We can add more metrics by clicking the ADD METRICS button and the bottom as well. - Configure Here we can set the configurations of our website such as the .NET and PHP runtime version, diagnostics settings, application settings and the IIS default documents. - Scale This is something interesting. In WAWS there are two compute mode or called web site mode. One is “shared”, which means our website will be shared with other web sites in a group of windows azure virtual machines. Each web site have its own process (w3wp.exe) with some sandbox technology to isolate from others. When we need to scaling-out our web site in shared mode, we actually increased the working process count. Hence in shared mode we cannot specify the virtual machine size since they are shared across all web sites. This is a little bit different than the scaling mode of the cloud service (hosted service web role and worker role). The other mode called “dedicate”, which means our web site will use the whole windows azure virtual machine. This is the same hosting behavior as cloud service web role. In web role it will be deployed on the virtual machines we specified and all of them are only used by us. In web sites dedicate mode, it’s the same. In this mode when we scaling-out our web site we will use more virtual machines, and each of them will only host our own website. And we can specify the virtual machine size in this mode. In the developer portal we can select which mode we are using from the scale section. In shared mode we can only specify the instance count, but in dedicate mode we can specify the instance size as well as the instance count. - Linked Resource The MySQL database created alone with the creation of our WordPress web site is a linked resource. We can add more linked resources in this section. Pricing For the web site itself, since this feature is in preview period if you are using shared mode, then you will get free up to 10 web sites. But if you are using dedicate mode, the price would be the virtual machines you are using. For example, if you are using dedicate and configured two middle size virtual machines then you will pay $230.40 per month. If there is SQL Database linked to your web site then they will be charged separately based on the Pay-As-You-Go price. For example a 1GB web edition database costs $9.99 per month. And the bandwidth will be charged as well. For example 10GB outbound data transfer costs $1.20 per month. For more information about the pricing please have a look at the windows azure pricing page. Summary Windows Azure Web Sites gives us easier and quicker way to create, develop and deploy website to window azure platform. Comparing with the cloud service web role, the WAWS have many out-of-box gallery we can use directly. So if you just want to build a blog, CMS or business portal you don’t need to learn ASP.NET, you don’t need to learn how to configure DotNetNuke, you don’t need to learn how to prepare PHP and MySQL. By using WAWS gallery you can establish a website within 10 minutes without any lines of code. But in some cases we do need to code by ourselves. We may need to tweak the layout of our pages, or we may have a traditional ASP.NET or PHP web application which needed to migrated to the cloud. Besides the gallery WAWS also provides many features to download, upload code. It also provides the feature to integrate with some version control services such as TFS and Git. And it also provides the deploy approaches through FTP and Web Deploy. In the next post I will demonstrate how to use WebMatrix to download and modify the website, and how to use TFS and Git to deploy automatically one our code changes committed. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Ubuntu 12.04 OpenCL with Intel and Radeon?

- by Steve

I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

Read the article

Combine 3D objects in XNA 4

- by Christoph

Currently I am writing on my thesis for university, the theme I am working on is 3D Visualization of hierarchical structures using cone trees. I want to do is to draw a cone and arrange a number of spheres at the bottom of the cone. The spheres should be arranged according to the radius and the number of spheres correctly. As you can imagine I need a lot of these cone/sphere combinations. First Attempt I was able to find some tutorials that helped with drawing cones and spheres. Cone public Cone(GraphicsDevice device, float height, int tessellation, string name, List<Sphere> children) { //prepare children and calculate the children spacing and radius of the cone if (children == null || children.Count == 0) { throw new ArgumentNullException("children"); } this.Height = height; this.Name = name; this.Children = children; //create the cone if (tessellation < 3) { throw new ArgumentOutOfRangeException("tessellation"); } //Create a ring of triangels around the outside of the cones bottom for (int i = 0; i < tessellation; i++) { Vector3 normal = this.GetCircleVector(i, tessellation); // add the vertices for the top of the cone base.AddVertex(Vector3.Up * height, normal); //add the bottom circle base.AddVertex(normal * this.radius + Vector3.Down * height, normal); //Add indices base.AddIndex(i * 2); base.AddIndex(i * 2 + 1); base.AddIndex((i * 2 + 2) % (tessellation * 2)); base.AddIndex(i * 2 + 1); base.AddIndex((i * 2 + 3) % (tessellation * 2)); base.AddIndex((i * 2 + 2) % (tessellation * 2)); } //create flate triangle to seal the bottom this.CreateCap(tessellation, height, this.Radius, Vector3.Down); base.InitializePrimitive(device); } Sphere public void Initialize(GraphicsDevice device, Vector3 qi) { int verticalSegments = this.Tesselation; int horizontalSegments = this.Tesselation * 2; //single vertex on the bottom base.AddVertex((qi * this.Radius) + this.lowering, Vector3.Down); for (int i = 0; i < verticalSegments; i++) { float latitude = ((i + 1) * MathHelper.Pi / verticalSegments) - MathHelper.PiOver2; float dy = (float)Math.Sin(latitude); float dxz = (float)Math.Cos(latitude); //Create a singe ring of latitudes for (int j = 0; j < horizontalSegments; j++) { float longitude = j * MathHelper.TwoPi / horizontalSegments; float dx = (float)Math.Cos(longitude) * dxz; float dz = (float)Math.Sin(longitude) * dxz; Vector3 normal = new Vector3(dx, dy, dz); base.AddVertex(normal * this.Radius, normal); } } // Finish with a single vertex at the top of the sphere. AddVertex((qi * this.Radius) + this.lowering, Vector3.Up); // Create a fan connecting the bottom vertex to the bottom latitude ring. for (int i = 0; i < horizontalSegments; i++) { AddIndex(0); AddIndex(1 + (i + 1) % horizontalSegments); AddIndex(1 + i); } // Fill the sphere body with triangles joining each pair of latitude rings. for (int i = 0; i < verticalSegments - 2; i++) { for (int j = 0; j < horizontalSegments; j++) { int nextI = i + 1; int nextJ = (j + 1) % horizontalSegments; base.AddIndex(1 + i * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); } } // Create a fan connecting the top vertex to the top latitude ring. for (int i = 0; i < horizontalSegments; i++) { base.AddIndex(CurrentVertex - 1); base.AddIndex(CurrentVertex - 2 - (i + 1) % horizontalSegments); base.AddIndex(CurrentVertex - 2 - i); } base.InitializePrimitive(device); } The tricky part now is to arrange the spheres at the bottom of the cone. I tried is to draw just the cone and then draw the spheres. I need a lot of these cones, so it would be pretty hard to calculate all the positions correctly. Second Attempt So the second try was to generate a object that builds all vertices of the cone and all of the spheres at once. So I was hoping to render a cone with all its spheres arranged correctly. After a short debug I found out that the cone is created and the first sphere, when it turn of the second sphere I am running into an OutOfBoundsException of ushort.MaxValue. Cone and Spheres public ConeWithSpheres(GraphicsDevice device, float height, float coneDiameter, float sphereDiameter, int coneTessellation, int sphereTessellation, int numberOfSpheres) { if (coneTessellation < 3) { throw new ArgumentException(string.Format("{0} is to small for the tessellation of the cone. The number must be greater or equal to 3", coneTessellation)); } if (sphereTessellation < 3) { throw new ArgumentException(string.Format("{0} is to small for the tessellation of the sphere. The number must be greater or equal to 3", sphereTessellation)); } //set properties this.Height = height; this.ConeDiameter = coneDiameter; this.SphereDiameter = sphereDiameter; this.NumberOfChildren = numberOfSpheres; //end set properties //generate the cone this.GenerateCone(device, coneTessellation); //generate the spheres //vector that defines the Y position of the sphere on the cones bottom Vector3 lowering = new Vector3(0, 0.888f, 0); this.GenerateSpheres(device, sphereTessellation, numberOfSpheres, lowering); } // ------ GENERATE CONE ------ private void GenerateCone(GraphicsDevice device, int coneTessellation) { int doubleTessellation = coneTessellation * 2; //Create a ring of triangels around the outside of the cones bottom for (int index = 0; index < coneTessellation; index++) { Vector3 normal = this.GetCircleVector(index, coneTessellation); //add the vertices for the top of the cone base.AddVertex(Vector3.Up * this.Height, normal); //add the bottom of the cone base.AddVertex(normal * this.ConeRadius + Vector3.Down * this.Height, normal); //add indices base.AddIndex(index * 2); base.AddIndex(index * 2 + 1); base.AddIndex((index * 2 + 2) % doubleTessellation); base.AddIndex(index * 2 + 1); base.AddIndex((index * 2 + 3) % doubleTessellation); base.AddIndex((index * 2 + 2) % doubleTessellation); } //create flate triangle to seal the bottom this.CreateCap(coneTessellation, this.Height, this.ConeRadius, Vector3.Down); base.InitializePrimitive(device); } // ------ GENERATE SPHERES ------ private void GenerateSpheres(GraphicsDevice device, int sphereTessellation, int numberOfSpheres, Vector3 lowering) { int verticalSegments = sphereTessellation; int horizontalSegments = sphereTessellation * 2; for (int childCount = 1; childCount < numberOfSpheres; childCount++) { //single vertex at the bottom of the sphere base.AddVertex((this.GetCircleVector(childCount, this.NumberOfChildren) * this.SphereRadius) + lowering, Vector3.Down); for (int verticalSegmentsCount = 0; verticalSegmentsCount < verticalSegments; verticalSegmentsCount++) { float latitude = ((verticalSegmentsCount + 1) * MathHelper.Pi / verticalSegments) - MathHelper.PiOver2; float dy = (float)Math.Sin(latitude); float dxz = (float)Math.Cos(latitude); //create a single ring of latitudes for (int horizontalSegmentsCount = 0; horizontalSegmentsCount < horizontalSegments; horizontalSegmentsCount++) { float longitude = horizontalSegmentsCount * MathHelper.TwoPi / horizontalSegments; float dx = (float)Math.Cos(longitude) * dxz; float dz = (float)Math.Sin(longitude) * dxz; Vector3 normal = new Vector3(dx, dy, dz); base.AddVertex((normal * this.SphereRadius) + lowering, normal); } } //finish with a single vertex at the top of the sphere base.AddVertex((this.GetCircleVector(childCount, this.NumberOfChildren) * this.SphereRadius) + lowering, Vector3.Up); //create a fan connecting the bottom vertex to the bottom latitude ring for (int i = 0; i < horizontalSegments; i++) { base.AddIndex(0); base.AddIndex(1 + (i + 1) % horizontalSegments); base.AddIndex(1 + i); } //Fill the sphere body with triangles joining each pair of latitude rings for (int i = 0; i < verticalSegments - 2; i++) { for (int j = 0; j < horizontalSegments; j++) { int nextI = i + 1; int nextJ = (j + 1) % horizontalSegments; base.AddIndex(1 + i * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); } } //create a fan connecting the top vertiex to the top latitude for (int i = 0; i < horizontalSegments; i++) { base.AddIndex(this.CurrentVertex - 1); base.AddIndex(this.CurrentVertex - 2 - (i + 1) % horizontalSegments); base.AddIndex(this.CurrentVertex - 2 - i); } base.InitializePrimitive(device); } } Any ideas how I could fix this?

Read the article

Fluent NHibernate Many to one mapping

- by Jit

I am creating a NHibenate application with one to many relationship. Like City and State data. City table CREATE TABLE [dbo].[State]( [StateId] [varchar](2) NOT NULL primary key, [StateName] [varchar](20) NULL) CREATE TABLE [dbo].[City]( [Id] [int] primary key IDENTITY(1,1) NOT NULL , [State_id] [varchar](2) NULL refrences State(StateId), [CityName] [varchar](50) NULL) My mapping is follows public CityMapping() { Id(x = x.Id); Map(x = x.State_id); Map(x = x.CityName); HasMany(x = x.EmployeePreferedLocations) .Inverse() .Cascade.SaveUpdate() ; References(x = x.State) //.Cascade.All(); //.Class(typeof(State)) //.Not.Nullable() .Cascade.None() .Column("State_id") ; } public StateMapping() { Id(x => x.StateId) .GeneratedBy.Assigned(); Map(x => x.StateName); HasMany(x => x.Jobs) .Inverse(); //.Cascade.SaveUpdate(); HasMany(x => x.EmployeePreferedLocations) .Inverse(); HasMany(x => x.Cities) // .Inverse() .Cascade.SaveUpdate() //.Not.LazyLoad() ; } Models are as follows: [Serializable] public partial class City { public virtual System.String CityName { get; set; } public virtual System.Int32 Id { get; set; } public virtual System.String State_id { get; set; } public virtual IList<EmployeePreferedLocation> EmployeePreferedLocations { get; set; } public virtual JobPortal.Data.Domain.Model.State State { get; set; } public City(){} } public partial class State { public virtual System.String StateId { get; set; } public virtual System.String StateName { get; set; } public virtual IList<City> Cities { get; set; } public virtual IList<EmployeePreferedLocation> EmployeePreferedLocations { get; set; } public virtual IList<Job> Jobs { get; set; } public State() { Cities = new List<City>(); EmployeePreferedLocations = new List<EmployeePreferedLocation>(); Jobs = new List<Job>(); } //public virtual void AddCity(City city) //{ // city.State = this; // Cities.Add(city); //} } My Unit Testing code is below. City city = new City(); IRepository<State> rState = new Repository<State>(); Dictionary<string, string> critetia = new Dictionary<string, string>(); critetia.Add("StateId", "TX"); State frState = rState.GetByCriteria(critetia); city.CityName = "Waco"; city.State = frState; IRepository<City> rCity = new Repository<City>(); rCity.SaveOrUpdate(city); City frCity = rCity.GetById(city.Id); The problem is , I am not able to insert record. The error is below. "Invalid index 2 for this SqlParameterCollection with Count=2." But the error will not come if I comment State_id mapping field in the CityMapping file. I donot know what mistake is I did. If do not give the mapping Map(x = x.State_id); the value of this field is null, which is desired. Please help me how to solve this issue.

Read the article

Why StrinUtils Apache class is not recognized in android?

- by Maxood

Why import org.apache.commons.lang.StringUtils cannot be imported in android by default. Do i have to include an external library? Then where can i find that library on the web? package com.myapps.urlencoding; import android.app.Activity; import org.apache.commons.lang.StringUtils; public class EncodeIdUtil extends Activity { /** Called when the activity is first created. */ private static Long multiplier=Long.parseLong("1zzzz",36); /** * Encodes the id. * @param id the id to encode * @return encoded string */ public static String encode(Long id) { return StringUtils.reverse(Long.toString((id*multiplier), 35)); } /** * Decodes the encoded id. * @param encodedId the encodedId to decode * @return the Id * @throws IllegalArgumentException if encodedId is not a validly encoded id. */ public static Long decode(String encodedId) throws IllegalArgumentException { long product; try { product = Long.parseLong(StringUtils.reverse(encodedId), 35); } catch (Exception e) { throw new IllegalArgumentException(); } if ( 0 != product % multiplier || product < 0) { throw new IllegalArgumentException(); } return product/multiplier; } }

Read the article

GDI+ crashes when loading PNG from IStream

- by konforce

I wrote something to load PNG files from a custom C++ IStream via GDI+. It worked great until I ran it on Vista machines. Crashes every time. When compiled on VS 2008, I found that inserting code into the IStream::AddRef method, such as a cout, made the problem go away. When compiling with VS 2010, it still crashes regardless of that. I stripped the program down to its basics. I copied a FileStream straight from Microsoft's documentation. It can load PNGs when using Bitmap::FromFile. It can load JPEGs, GIFs, and BMPs via FromFile or FromStream. So in short: on Vista, PNG files loaded via Bitmap::FromStream crash. #pragma comment(lib, "gdiplus.lib") #include <iostream> #include <objidl.h> #include <gdiplus.h> class FileStream : public IStream { public: FileStream(HANDLE hFile) { _refcount = 1; _hFile = hFile; } ~FileStream() { if (_hFile != INVALID_HANDLE_VALUE) { ::CloseHandle(_hFile); } } public: HRESULT static OpenFile(LPCWSTR pName, IStream ** ppStream, bool fWrite) { HANDLE hFile = ::CreateFileW(pName, fWrite ? GENERIC_WRITE : GENERIC_READ, FILE_SHARE_READ, NULL, fWrite ? CREATE_ALWAYS : OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if (hFile == INVALID_HANDLE_VALUE) return HRESULT_FROM_WIN32(GetLastError()); *ppStream = new FileStream(hFile); if(*ppStream == NULL) CloseHandle(hFile); return S_OK; } virtual HRESULT STDMETHODCALLTYPE QueryInterface(REFIID iid, void ** ppvObject) { if (iid == __uuidof(IUnknown) || iid == __uuidof(IStream) || iid == __uuidof(ISequentialStream)) { *ppvObject = static_cast<IStream*>(this); AddRef(); return S_OK; } else return E_NOINTERFACE; } virtual ULONG STDMETHODCALLTYPE AddRef(void) { return (ULONG)InterlockedIncrement(&_refcount); } virtual ULONG STDMETHODCALLTYPE Release(void) { ULONG res = (ULONG) InterlockedDecrement(&_refcount); if (res == 0) delete this; return res; } // ISequentialStream Interface public: virtual HRESULT STDMETHODCALLTYPE Read(void* pv, ULONG cb, ULONG* pcbRead) { ULONG local_pcbRead; BOOL rc = ReadFile(_hFile, pv, cb, &local_pcbRead, NULL); if (pcbRead) *pcbRead = local_pcbRead; return (rc) ? S_OK : HRESULT_FROM_WIN32(GetLastError()); } virtual HRESULT STDMETHODCALLTYPE Write(void const* pv, ULONG cb, ULONG* pcbWritten) { BOOL rc = WriteFile(_hFile, pv, cb, pcbWritten, NULL); return rc ? S_OK : HRESULT_FROM_WIN32(GetLastError()); } // IStream Interface public: virtual HRESULT STDMETHODCALLTYPE SetSize(ULARGE_INTEGER) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE CopyTo(IStream*, ULARGE_INTEGER, ULARGE_INTEGER*, ULARGE_INTEGER*) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE Commit(DWORD) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE Revert(void) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE LockRegion(ULARGE_INTEGER, ULARGE_INTEGER, DWORD) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE UnlockRegion(ULARGE_INTEGER, ULARGE_INTEGER, DWORD) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE Clone(IStream **) { return E_NOTIMPL; } virtual HRESULT STDMETHODCALLTYPE Seek(LARGE_INTEGER liDistanceToMove, DWORD dwOrigin, ULARGE_INTEGER* lpNewFilePointer) { DWORD dwMoveMethod; switch(dwOrigin) { case STREAM_SEEK_SET: dwMoveMethod = FILE_BEGIN; break; case STREAM_SEEK_CUR: dwMoveMethod = FILE_CURRENT; break; case STREAM_SEEK_END: dwMoveMethod = FILE_END; break; default: return STG_E_INVALIDFUNCTION; break; } if (SetFilePointerEx(_hFile, liDistanceToMove, (PLARGE_INTEGER) lpNewFilePointer, dwMoveMethod) == 0) return HRESULT_FROM_WIN32(GetLastError()); return S_OK; } virtual HRESULT STDMETHODCALLTYPE Stat(STATSTG* pStatstg, DWORD grfStatFlag) { if (GetFileSizeEx(_hFile, (PLARGE_INTEGER) &pStatstg->cbSize) == 0) return HRESULT_FROM_WIN32(GetLastError()); return S_OK; } private: volatile HANDLE _hFile; volatile LONG _refcount; }; #define USE_STREAM int main() { Gdiplus::GdiplusStartupInput gdiplusStartupInput; ULONG_PTR gdiplusToken; Gdiplus::GdiplusStartup(&gdiplusToken, &gdiplusStartupInput, NULL); Gdiplus::Bitmap *bmp; #ifndef USE_STREAM bmp = Gdiplus::Bitmap::FromFile(L"test.png", false); if (!bmp) { std::cerr << " Unable to open image file." << std::endl; return 1; } #else IStream *s; if (FileStream::OpenFile(L"test.png", &s, false) != S_OK) { std::cerr << "Unable to open image file." << std::endl; return 1; } bmp = Gdiplus::Bitmap::FromStream(s, false); #endif std::cout << "Image is " << bmp->GetWidth() << " by " << bmp->GetHeight() << std::endl; Gdiplus::GdiplusShutdown(gdiplusToken); #ifdef USE_STREAM s->Release(); #endif return 0; } Tracing and debugging, shows that it does make some calls to the IStream class. It crashes inside of lastResult = DllExports::GdipCreateBitmapFromStream(stream, &bitmap); from GdiPlusBitmap.h, which is a static inline wrapper over the flat API. Other than the reference counting, the only IStream methods it calls is stat (for file size), read, and seek. Call stack looks like: ntdll.dll!_DbgBreakPoint@0() + 0x1 bytes ntdll.dll!_RtlpBreakPointHeap@4() + 0x28 bytes ntdll.dll!_RtlpValidateHeapEntry@12() + 0x70a3c bytes ntdll.dll!_RtlDebugFreeHeap@12() + 0x9a bytes ntdll.dll!@RtlpFreeHeap@16() + 0x13cdd bytes ntdll.dll!_RtlFreeHeap@12() + 0x2e49 bytes kernel32.dll!_HeapFree@12() + 0x14 bytes ole32.dll!CRetailMalloc_Free() + 0x1c bytes ole32.dll!_CoTaskMemFree@4() + 0x13 bytes GdiPlus.dll!GpPngDecoder::GetImageInfo() + 0x68 bytes GdiPlus.dll!GpDecodedImage::InternalGetImageInfo() + 0x3c bytes GdiPlus.dll!GpDecodedImage::GetImageInfo() + 0x18 bytes GdiPlus.dll!CopyOnWriteBitmap::CopyOnWriteBitmap() + 0x49 bytes GdiPlus.dll!CopyOnWriteBitmap::Create() + 0x1d bytes GdiPlus.dll!GpBitmap::GpBitmap() + 0x2c bytes I was unable to find anybody else with the same problem, so I assume there's something wrong with my implementation...

Read the article

Windows Azure: Backup Services Release, Hyper-V Recovery Manager, VM Enhancements, Enhanced Enterprise Management Support

- by ScottGu

This morning we released a huge set of updates to Windows Azure. These new capabilities include: Backup Services: General Availability of Windows Azure Backup Services Hyper-V Recovery Manager: Public preview of Windows Azure Hyper-V Recovery Manager Virtual Machines: Delete Attached Disks, Availability Set Warnings, SQL AlwaysOn Configuration Active Directory: Securely manage hundreds of SaaS applications Enterprise Management: Use Active Directory to Better Manage Windows Azure Windows Azure SDK 2.2: A massive update of our SDK + Visual Studio tooling support All of these improvements are now available to use immediately. Below are more details about them. Backup Service: General Availability Release of Windows Azure Backup Today we are releasing Windows Azure Backup Service as a general availability service. This release is now live in production, backed by an enterprise SLA, supported by Microsoft Support, and is ready to use for production scenarios. Windows Azure Backup is a cloud based backup solution for Windows Server which allows files and folders to be backed up and recovered from the cloud, and provides off-site protection against data loss. The service provides IT administrators and developers with the option to back up and protect critical data in an easily recoverable way from any location with no upfront hardware cost. Windows Azure Backup is built on the Windows Azure platform and uses Windows Azure blob storage for storing customer data. Windows Server uses the downloadable Windows Azure Backup Agent to transfer file and folder data securely and efficiently to the Windows Azure Backup Service. Along with providing cloud backup for Windows Server, Windows Azure Backup Service also provides capability to backup data from System Center Data Protection Manager and Windows Server Essentials, to the cloud. All data is encrypted onsite before it is sent to the cloud, and customers retain and manage the encryption key (meaning the data is stored entirely secured and can’t be decrypted by anyone but yourself). Getting Started To get started with the Windows Azure Backup Service, create a new Backup Vault within the Windows Azure Management Portal. Click New->Data Services->Recovery Services->Backup Vault to do this: Once the backup vault is created you’ll be presented with a simple tutorial that will help guide you on how to register your Windows Servers with it: Once the servers you want to backup are registered, you can use the appropriate local management interface (such as the Microsoft Management Console snap-in, System Center Data Protection Manager Console, or Windows Server Essentials Dashboard) to configure the scheduled backups and to optionally initiate recoveries. You can follow these tutorials to learn more about how to do this: Tutorial: Schedule Backups Using the Windows Azure Backup Agent This tutorial helps you with setting up a backup schedule for your registered Windows Servers. Additionally, it also explains how to use Windows PowerShell cmdlets to set up a custom backup schedule. Tutorial: Recover Files and Folders Using the Windows Azure Backup Agent This tutorial helps you with recovering data from a backup. Additionally, it also explains how to use Windows PowerShell cmdlets to do the same tasks. Below are some of the key benefits the Windows Azure Backup Service provides: Simple configuration and management. Windows Azure Backup Service integrates with the familiar Windows Server Backup utility in Windows Server, the Data Protection Manager component in System Center and Windows Server Essentials, in order to provide a seamless backup and recovery experience to a local disk, or to the cloud. Block level incremental backups. The Windows Azure Backup Agent performs incremental backups by tracking file and block level changes and only transferring the changed blocks, hence reducing the storage and bandwidth utilization. Different point-in-time versions of the backups use storage efficiently by only storing the changes blocks between these versions. Data compression, encryption and throttling. The Windows Azure Backup Agent ensures that data is compressed and encrypted on the server before being sent to the Windows Azure Backup Service over the network. As a result, the Windows Azure Backup Service only stores encrypted data in the cloud storage. The encryption key is not available to the Windows Azure Backup Service, and as a result the data is never decrypted in the service. Also, users can setup throttling and configure how the Windows Azure Backup service utilizes the network bandwidth when backing up or restoring information. Data integrity is verified in the cloud. In addition to the secure backups, the backed up data is also automatically checked for integrity once the backup is done. As a result, any corruptions which may arise due to data transfer can be easily identified and are fixed automatically. Configurable retention policies for storing data in the cloud. The Windows Azure Backup Service accepts and implements retention policies to recycle backups that exceed the desired retention range, thereby meeting business policies and managing backup costs. Hyper-V Recovery Manager: Now Available in Public Preview I’m excited to also announce the public preview of a new Windows Azure Service – the Windows Azure Hyper-V Recovery Manager (HRM). Windows Azure Hyper-V Recovery Manager helps protect your business critical services by coordinating the replication and recovery of System Center Virtual Machine Manager 2012 SP1 and System Center Virtual Machine Manager 2012 R2 private clouds at a secondary location. With automated protection, asynchronous ongoing replication, and orderly recovery, the Hyper-V Recovery Manager service can help you implement Disaster Recovery and restore important services accurately, consistently, and with minimal downtime. Application data in an Hyper-V Recovery Manager scenarios always travels on your on-premise replication channel. Only metadata (such as names of logical clouds, virtual machines, networks etc.) that is needed for orchestration is sent to Azure. All traffic sent to/from Azure is encrypted. You can begin using Windows Azure Hyper-V Recovery today by clicking New->Data Services->Recovery Services->Hyper-V Recovery Manager within the Windows Azure Management Portal. You can read more about Windows Azure Hyper-V Recovery Manager in Brad Anderson’s 9-part series, Transform the datacenter. To learn more about setting up Hyper-V Recovery Manager follow our detailed step-by-step guide. Virtual Machines: Delete Attached Disks, Availability Set Warnings, SQL AlwaysOn Today’s Windows Azure release includes a number of nice updates to Windows Azure Virtual Machines. These improvements include: Ability to Delete both VM Instances + Attached Disks in One Operation Prior to today’s release, when you deleted VMs within Windows Azure we would delete the VM instance – but not delete the drives attached to the VM. You had to manually delete these yourself from the storage account. With today’s update we’ve added a convenience option that now allows you to either retain or delete the attached disks when you delete the VM: We’ve also added the ability to delete a cloud service, its deployments, and its role instances with a single action. This can either be a cloud service that has production and staging deployments with web and worker roles, or a cloud service that contains virtual machines. To do this, simply select the Cloud Service within the Windows Azure Management Portal and click the “Delete” button: Warnings on Availability Sets with Only One Virtual Machine In Them One of the nice features that Windows Azure Virtual Machines supports is the concept of “Availability Sets”. An “availability set” allows you to define a tier/role (e.g. webfrontends, databaseservers, etc) that you can map Virtual Machines into – and when you do this Windows Azure separates them across fault domains and ensures that at least one of them is always available during servicing operations. This enables you to deploy applications in a high availability way. One issue we’ve seen some customers run into is where they define an availability set, but then forget to map more than one VM into it (which defeats the purpose of having an availability set). With today’s release we now display a warning in the Windows Azure Management Portal if you have only one virtual machine deployed in an availability set to help highlight this: You can learn more about configuring the availability of your virtual machines here. Configuring SQL Server Always On SQL Server Always On is a great feature that you can use with Windows Azure to enable high availability and DR scenarios with SQL Server. Today’s Windows Azure release makes it even easier to configure SQL Server Always On by enabling “Direct Server Return” endpoints to be configured and managed within the Windows Azure Management Portal. Previously, setting this up required using PowerShell to complete the endpoint configuration. Starting today you can enable this simply by checking the “Direct Server Return” checkbox: You can learn more about how to use direct server return for SQL Server AlwaysOn availability groups here. Active Directory: Application Access Enhancements This summer we released our initial preview of our Application Access Enhancements for Windows Azure Active Directory. This service enables you to securely implement single-sign-on (SSO) support against SaaS applications (including Office 365, SalesForce, Workday, Box, Google Apps, GitHub, etc) as well as LOB based applications (including ones built with the new Windows Azure AD support we shipped last week with ASP.NET and VS 2013). Since the initial preview we’ve enhanced our SAML federation capabilities, integrated our new password vaulting system, and shipped multi-factor authentication support. We've also turned on our outbound identity provisioning system and have it working with hundreds of additional SaaS Applications: Earlier this month we published an update on dates and pricing for when the service will be released in general availability form. In this blog post we announced our intention to release the service in general availability form by the end of the year. We also announced that the below features would be available in a free tier with it: SSO to every SaaS app we integrate with – Users can Single Sign On to any app we are integrated with at no charge. This includes all the top SAAS Apps and every app in our application gallery whether they use federation or password vaulting. Application access assignment and removal – IT Admins can assign access privileges to web applications to the users in their active directory assuring that every employee has access to the SAAS Apps they need. And when a user leaves the company or changes jobs, the admin can just as easily remove their access privileges assuring data security and minimizing IP loss User provisioning (and de-provisioning) – IT admins will be able to automatically provision users in 3rd party SaaS applications like Box, Salesforce.com, GoToMeeting, DropBox and others. We are working with key partners in the ecosystem to establish these connections, meaning you no longer have to continually update user records in multiple systems. Security and auditing reports – Security is a key priority for us. With the free version of these enhancements you'll get access to our standard set of access reports giving you visibility into which users are using which applications, when they were using them and where they are using them from. In addition, we'll alert you to un-usual usage patterns for instance when a user logs in from multiple locations at the same time. Our Application Access Panel – Users are logging in from every type of devices including Windows, iOS, & Android. Not all of these devices handle authentication in the same manner but the user doesn't care. They need to access their apps from the devices they love. Our Application Access Panel will support the ability for users to access access and launch their apps from any device and anywhere. You can learn more about our plans for application management with Windows Azure Active Directory here. Try out the preview and start using it today. Enterprise Management: Use Active Directory to Better Manage Windows Azure Windows Azure Active Directory provides the ability to manage your organization in a directory which is hosted entirely in the cloud, or alternatively kept in sync with an on-premises Windows Server Active Directory solution (allowing you to seamlessly integrate with the directory you already have). With today’s Windows Azure release we are integrating Windows Azure Active Directory even more within the core Windows Azure management experience, and enabling an even richer enterprise security offering. Specifically: 1) All Windows Azure accounts now have a default Windows Azure Active Directory created for them. You can create and map any users you want into this directory, and grant administrative rights to manage resources in Windows Azure to these users. 2) You can keep this directory entirely hosted in the cloud – or optionally sync it with your on-premises Windows Server Active Directory. Both options are free. The later approach is ideal for companies that wish to use their corporate user identities to sign-in and manage Windows Azure resources. It also ensures that if an employee leaves an organization, his or her access control rights to the company’s Windows Azure resources are immediately revoked. 3) The Windows Azure Service Management APIs have been updated to support using Windows Azure Active Directory credentials to sign-in and perform management operations. Prior to today’s release customers had to download and use management certificates (which were not scoped to individual users) to perform management operations. We still support this management certificate approach (don’t worry – nothing will stop working). But we think the new Windows Azure Active Directory authentication support enables an even easier and more secure way for customers to manage resources going forward. 4) The Windows Azure SDK 2.2 release (which is also shipping today) includes built-in support for the new Service Management APIs that authenticate with Windows Azure Active Directory, and now allow you to create and manage Windows Azure applications and resources directly within Visual Studio using your Active Directory credentials. This, combined with updated PowerShell scripts that also support Active Directory, enables an end-to-end enterprise authentication story with Windows Azure. Below are some details on how all of this works: Subscriptions within a Directory As part of today’s update, we have associated all existing Window Azure accounts with a Windows Azure Active Directory (and created one for you if you don’t already have one). When you login to the Windows Azure Management Portal you’ll now see the directory name in the URI of the browser. For example, in the screen-shot below you can see that I have a “scottgu” directory that my subscriptions are hosted within: Note that you can continue to use Microsoft Accounts (formerly known as Microsoft Live IDs) to sign-into Windows Azure. These map just fine to a Windows Azure Active Directory – so there is no need to create new usernames that are specific to a directory if you don’t want to. In the scenario above I’m actually logged in using my @hotmail.com based Microsoft ID which is now mapped to a “scottgu” active directory that was created for me. By default everything will continue to work just like you used to before. Manage your Directory You can manage an Active Directory (including the one we now create for you by default) by clicking the “Active Directory” tab in the left-hand side of the portal. This will list all of the directories in your account. Clicking one the first time will display a getting started page that provides documentation and links to perform common tasks with it: You can use the built-in directory management support within the Windows Azure Management Portal to add/remove/manage users within the directory, enable multi-factor authentication, associate a custom domain (e.g. mycompanyname.com) with the directory, and/or rename the directory to whatever friendly name you want (just click the configure tab to do this). You can also setup the directory to automatically sync with an on-premises Active Directory using the “Directory Integration” tab. Note that users within a directory by default do not have admin rights to login or manage Windows Azure based resources. You still need to explicitly grant them co-admin permissions on a subscription for them to login or manage resources in Windows Azure. You can do this by clicking the Settings tab on the left-hand side of the portal and then by clicking the administrators tab within it. Sign-In Integration within Visual Studio If you install the new Windows Azure SDK 2.2 release, you can now connect to Windows Azure from directly inside Visual Studio without having to download any management certificates. You can now just right-click on the “Windows Azure” icon within the Server Explorer and choose the “Connect to Windows Azure” context menu option to do so: Doing this will prompt you to enter the email address of the username you wish to sign-in with (make sure this account is a user in your directory with co-admin rights on a subscription): You can use either a Microsoft Account (e.g. Windows Live ID) or an Active Directory based Organizational account as the email. The dialog will update with an appropriate login prompt depending on which type of email address you enter: Once you sign-in you’ll see the Windows Azure resources that you have permissions to manage show up automatically within the Visual Studio server explorer and be available to start using: No downloading of management certificates required. All of the authentication was handled using your Windows Azure Active Directory! Manage Subscriptions across Multiple Directories If you have already have multiple directories and multiple subscriptions within your Windows Azure account, we have done our best to create a good default mapping of your subscriptions->directories as part of today’s update. If you don’t like the default subscription-to-directory mapping we have done you can click the Settings tab in the left-hand navigation of the Windows Azure Management Portal and browse to the Subscriptions tab within it: If you want to map a subscription under a different directory in your account, simply select the subscription from the list, and then click the “Edit Directory” button to choose which directory to map it to. Mapping a subscription to a different directory takes only seconds and will not cause any of the resources within the subscription to recycle or stop working. We’ve made the directory->subscription mapping process self-service so that you always have complete control and can map things however you want. Filtering By Directory and Subscription Within the Windows Azure Management Portal you can filter resources in the portal by subscription (allowing you to show/hide different subscriptions). If you have subscriptions mapped to multiple directory tenants, we also now have a filter drop-down that allows you to filter the subscription list by directory tenant. This filter is only available if you have multiple subscriptions mapped to multiple directories within your Windows Azure Account: Windows Azure SDK 2.2 Today we are also releasing a major update of our Windows Azure SDK. The Windows Azure SDK 2.2 release adds some great new features including: Visual Studio 2013 Support Integrated Windows Azure Sign-In support within Visual Studio Remote Debugging Cloud Services with Visual Studio Firewall Management support within Visual Studio for SQL Databases Visual Studio 2013 RTM VM Images for MSDN Subscribers Windows Azure Management Libraries for .NET Updated Windows Azure PowerShell Cmdlets and ScriptCenter I’ll post a follow-up blog shortly with more details about all of the above. Additional Updates In addition to the above enhancements, today’s release also includes a number of additional improvements: AutoScale: Richer time and date based scheduling support (set different rules on different dates) AutoScale: Ability to Scale to Zero Virtual Machines (very useful for Dev/Test scenarios) AutoScale: Support for time-based scheduling of Mobile Service AutoScale rules Operation Logs: Auditing support for Service Bus management operations Today we also shipped a major update to the Windows Azure SDK – Windows Azure SDK 2.2. It has so much goodness in it that I have a whole second blog post coming shortly on it! :-) Summary Today’s Windows Azure release enables a bunch of great new scenarios, and enables a much richer enterprise authentication offering. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 551/1185 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558 | Next Page >

- by elliot100

- by Harry Pham

- by Josh

- by the other dude

- by Kerubu

- by muteW

- by salvationishere

- by Roberto Sebestyen

- by Stefan Hinker

- by Shaurya Anand

- by Richard Rotter

- by jsavit

- by Ken Le

- by Ritwik

- by Ian Boyd

- by Brigadieren

- by DaveJohnston

- by Antony Reynolds

- by Shaun

- by Steve

- by Christoph

- by Jit

- by Maxood

- by konforce

- by ScottGu

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558 | Next Page >