Search Results

Search found 15403 results on 617 pages for 'request querystring'.

Page 587/617 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

  • Squid - Logging to MySQL without empty rows/skipped records?

    - by Lee Ward
    I'm trying to figure out how to make Squid proxy log to MySQL. I know ACL order is pretty important but I'm not sure if I understand exactly what ACLs are or do, it's difficult to explain, but hopefully you'll see where I'm going with this as you read! I have created the lines to make Squid interact with a helper in squid.conf as follows: external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log The external ACL helper (mysql_lg.php) is a PHP script and is as follows: error_reporting(0); if (! defined(STDIN)) { define("STDIN", fopen("php://stdin", "r")); } $res = mysql_connect('localhost', 'squid', 'testsquidpw'); $dbres = mysql_select_db('squid', $res); while (!feof(STDIN)) { $line = trim(fgets(STDIN)); $fields = explode(' ', $line); $user = rawurldecode($fields[0]); $cli_ip = rawurldecode($fields[1]); $protocol = rawurldecode($fields[2]); $uri = rawurldecode($fields[3]); $q = "INSERT INTO logs (id, user, cli_ip, protocol, url) VALUES ('', '".$user."', '".$cli_ip."', '".$protocol."', '".$uri."');"; mysql_query($q) or die (mysql_error()); if ($fault) { fwrite(STDOUT, "ERR\n"); }; fwrite(STDOUT, "OK\n"); } The configuration I have right now looks like this: ## Authentication Handler auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 30 auth_param negotiate program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-basic auth_param negotiate children 5 # Allow squid to update log external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log acl localnet src 172.16.45.0/24 acl AuthorizedUsers proxy_auth REQUIRED acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl CONNECT method CONNECT acl blockeddomain url_regex "/etc/squid3/bl.acl" http_access deny blockeddomain deny_info ERR_BAD_GENERAL blockeddomain # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # Allow the internal network access to this proxy http_access allow localnet # Allow authorized users access to this proxy http_access allow AuthorizedUsers # FINAL RULE - Deny all other access to this proxy http_access deny all From testing, the closer to the bottom I place the logging lines the less it logs. Oftentimes, it even places empty rows in to the MySQL table. The file-based logs in /var/log/squid3/access.log are correct but many of the rows in the access logs are missing from the MySQL logs. I can't help but think it's down to the order I'm putting lines in because I want to log everything to MySQL, unauthenticated requests, blocked requests, which category blocked a specific request. The reason I want this in MySQL is because I'm trying to have everything managed via a custom web-based frontend and want to avoid using any shell commands and access to system log files if I can help it. The end result is to make it as easy as possible to maintain without keeping staff waiting on the phone whilst I add a new rule and reload the server! Hopefully someone can help me out here because this is very much a learning experience for me and I'm pretty stumped. Many thanks in advance for any help!

    Read the article

  • Specifying a Postfix Instance to send outbound email

    - by Catherine Jefferson
    I have a CentOS 6.5 server running Postfix 2.6x (the default distribution) with five public IPv4 IPs bound to it. Each IP has DNS and rDNS set separately. Each uses a different hostname at a different domain. I have five Postfix instances, one bound to each IP, like this example: 192.168.34.104 red.example.com /etc/postfix 192.168.36.48 green.example.net /etc/postfix-green 192.168.36.49 pink.example.org /etc/postfix-pink 192.168.36.50 orange.example.info /etc/postfix-orange 192.168.36.51 blue.example.us /etc/postfix-blue I've tested each IP by telneting to port 25. Postfix answers and banners properly with the correct hostname. Email is received on all of these instances with no problems and is routed to the correct place. This setup, minus the final instance, has existed for a couple of years and works. I never bothered to set up outbound email to go through any but the main instance, however; there was no need. Now I need to send email from blue.example.us that actually leaves from that interface and IP, such that the Received headers show blue.example.us as the sending mailhost, so that SPF and DKIM validate, etc etc. The email that will be sent from blue.example.com is a feedback loop sent by a single shell account on the server (account5), an account that is dedicated to sending this email. The account receives the feedback loop emails from servers on other networks, saves the bodies of those emails, and then generates a new outbound email header, appends the saved body, and sends the email. It's sending by piping each email to sendmail -oi -t. We're doing it this way to mask the identities of the initial servers. The procmail script that processes these emails works correctly. However, I cannot configure this account to send email through the proper Postfix instance/IP/interface. The exact same account and script sends email through the main Postfix instance /etc/postfix without any issues. When I change MAIL_CONFIG to point to /etc/postfix-blue in either .bash_profile or the Procmail script that handles this email, though, I get this error: sendmail: fatal: User account5(###) is not allowed to submit mail I've read the manuals on Postfix.org, searched Google, and tried the suggestions in three previous answers here on ServerFault.com: Postfix - specify interface to deliver outbound mail on Postfix user is not allowed to submit mail Postfix rejects php mails I have been careful to stop and restart Postfix after each configuration change, and tested the results. Nothing has worked. The main postfix instance happily accepts outbound email from account5. The postfix-blue instance continues to reject email from account5 with the sendmail error above. As tempting as it is to blame machine hostility, I know that I must be missing something or doing something wrong. Does anybody have any suggestions as to what it might be? Please feel free to ask for further information about my setup if you need it. =-=-=-=-=-=-=-=-=-= At the request of the responder, here are main.cf and master.cf for a) the main postfix instance ("red.example.com") and b) the FBL instance ("blue.example.us") [NOTE: All parameters not specified below were left at the default Postfix 2.6 settings] MAIN: master.cf smtp inet n - n - - smtpd main.cf myhostname = red.example.com mydomain = example.com inet_interfaces = $myhostname, localhost inet_protocols = all lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname, localhost.$mydomain, localhost local_recipient_maps = mynetworks = 192.168.34.104/32 relay_domains = example.com, example.info, example.net, example.org, example.us relayhost = [192.168.34.102] # Separate physical server, main mailserver. relay_recipient_maps = hash:/etc/postfix/relay_recipients alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases smtpd_banner = $myhostname ESMTP $mail_name multi_instance_wrapper = ${command_directory}/postmulti -p -- multi_instance_enable = yes multi_instance_directories = /etc/postfix-green /etc/postfix-pink /etc/postfix-orange /etc/postfix-blue FBL: master.cf 184.173.119.103:25 inet n - n - - smtpd main.cf myhostname = blue.example.us mydomain = blue.example.us <= Deliberately set to subdomain only. myorigin = $mydomain inet_interfaces = $myhostname lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname local_recipient_maps = unix:passwd.byname $alias_maps $virtual_alias_maps mynetworks = 192.168.36.51/32, 192.168.35.20/31 <= Second IP is backup MX servers relay_domains = $mydestination recipient_canonical_maps = hash:/etc/postfix-blue/canonical virtual_alias_maps = hash:/etc/postfix-fbl/virtual alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical mailbox_command = /usr/bin/procmail -a "$EXTENSION" DEFAULT=$HOME/Mail/ MAILDIR=$HOME/Mail smtpd_banner = $myhostname ESMTP $mail_name authorized_submit_users = multi_instance_name = postfix-blue multi_instance_enable = yes

    Read the article

  • got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

    - by vinlata
    Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

    Read the article

  • SQL Server 2000 and SSL Encryption

    - by Angry_IT_Guru
    We are a datacenter that hsots a SQL Server 2000 environment which provides database services for a product we sell that is loaded as a rich-client applicatin at each of our many clients and their workstations. Currently today, the application uses straight ODBC connections from the client site to our datacenter. We need to begin encrypting the credentials -- since everything is clear-text today and the authentication is weakly encrypted -- and I'm trying to determine the best way to implement SSL on the server with minimizing the impact of the client. A few things, however: 1) We have our own Windows domain and all our servers are joined to our private domain. Our clietns no nothing of our domain. 2) Typically, our clients connect to our datacenter servers either by: a) Using TCP/IP address b) Using a DNS name that we publish via internet, zone transfers from our DNS servers to our customers, or the client can add static HOSTS entries. 3) From what I understand from enabling encryption is that I can go to the Network Utility and select the "encryption" option for the protocol that I wish to encrypt. Such as TCP/IP. 4) When the encryption option is selected, I have a choice of installing a third-party certificate or a self-signed. I have tested the self-signed, but do have potential issues. I'll explain in a bit. If I go with a third-party cert, such as Verisign, or Network solutions... what kind of certificate do I request? These aren't IIS certificates? When I go create a self-signed via Microsoft's certificate server, I have to select "Authentication certificate". What does this translate to in the third-party world? 5) If I create a self-signed certificate, I understand that the "issue to" name has to match the FQDN for the server that is running SQL. In my case, I have to use my private domain name. If I use this, what does this do for my clients when trying to connect to my SQL Server? Surely they cannot resolve my private DNS names on their network.... I've also verified that when the self-signed certificate is installed, it has to be in the local personal store for the user account that is running SQL Server. SQL Server will only start if the FQDN matches the "issue to" of the certificate and SQL is running under the account that has the certificate installed. If I use a self-signed certificate, does this mean I have to have every one of my clients install it to verify? 6) If I used a third-party certificate, which sounds like the best option, do all my clients have to have internet access when accessing my private servers of their private WAN connection to use to verify the certificate? What do I do about the FQDN? It sounds like they have to use my private domain name -- which is not published -- and can no longer use the one that I setup for them to use? 7) I plan on upgrading to SQL 2000 soon. Is setup of SSL any easier/better with SQL 2005 than SQL 2000? Any help or guiadance would be appreciated

    Read the article

  • Setting environment variables in OS X

    - by Percival Ulysses
    Despite the warning that questions that can be answered are preferred, this question is more a request for comments. I apologize for this, but I feel that it is valuable nonetheless. The problem to set up environment variables such that they are available for GUI applications has been around since the dawn of Mac OS X. The solution with ~/.MacOSX/environment.plist never satisfied me because it was not reliable, and bash style globbing wasn't available. Another solution is the use of Login Hooks with a suitable shell script, but these are deprecated. The Apple approved way for such functionality as provided by login hooks is the use of Launch Agents. I provided a launch agent that is located in /Library/LaunchAgents/: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>user.conf.launchd</string> <key>Program</key> <string>/Users/Shared/conflaunchd.sh</string> <key>ProgramArguments</key> <array> <string>~/.conf.launchd</string> </array> <key>EnableGlobbing</key> <true/> <key>RunAtLoad</key> <true/> <key>LimitLoadToSessionType</key> <array> <string>Aqua</string> <string>StandardIO</string> </array> </dict> </plist> The real work is done in the shell script /Users/Shared/conflaunchd.sh, which reads ~/.conf.launchd and feeds it to launchctl: #! /bin/bash #filename="$1" filename="$HOME/.conf.launchd" if [ ! -r "$filename" ]; then exit fi eval $(/usr/libexec/path_helper -s) while read line; do # skip lines that only contain whitespace or a comment if [ ! -n "$line" -o `expr "$line" : '#'` -gt 0 ]; then continue; fi eval launchctl $line done <"$filename" exit 0 Notice the call of path_helper to get PATH set up right. Finally, ~/.conf.launchd looks like that setenv PATH ~/Applications:"${PATH}" setenv TEXINPUTS .:~/Documents/texmf//: setenv BIBINPUTS .:~/Documents/texmf/bibtex//: setenv BSTINPUTS .:~/Documents/texmf/bibtex//: # Locale setenv LANG en_US.UTF-8 These are launchctl commands, see its manpage for further information. Works fine for me (I should mention that I'm still a Snow Leopard guy), GUI applications such as texstudio can see my local texmf tree. Things that can be improved: The shell script has a #filename="$1" in it. This is not accidental, as the file name should be feeded to the script by the launch agent as an argument, but that doesn't work. It is possible to put the script in the launch agent itsself. I am not sure how secure this solution is, as it uses eval with user provided strings. It should be mentioned that Apple intended a somewhat similar approach by putting stuff in ~/launchd.conf, but it is currently unsupported as to this date and OS (see the manpage of launchd.conf). I guess that things like globbing would not work as they do in this proposal. Finally, I would mention the sources I used as information on Launch Agents, but StackExchange doesn't let me [1], [2], [3]. Again, I am sorry that this is not a real question, I still hope it is useful.

    Read the article

  • Mod_Rewrite w Apache mod_jrun22.so & ColdFusion 9 on cPanel

    - by Eddie B
    How can I utilize mod_rewrite at either the httpd.conf level or per-directory level when mod_jrun22 seems to have short-stopped the rewrite process for ColdFusion pages? I have a ColdFusion 9 based site running on Centos 5.8 w cPanel. cPanel uses EasyApache 3 to manage virtual host containers and as such the conf for mod_jrun22.so, /usr/local/apache/conf/includes/pre_main_global.conf, is loaded prior to the main httpd.conf with the domain specific rules for the container. My assertion is that .cfm pages are failing to be rewritten due to the mod_jk22.so module having priority in the directive chain. To note, I also have a WordPress blog in the site where the rewrites appear to be working fine. For example the following code to remove the index file works fine for php and fails with cfm ... .htaccess under /blog/ : This works Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase /blog/ RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /blog/index.php [L] </IfModule> .htaccess under / : This does not work as expected. Apache serves the page. ASSERT: This would redirect to domain.com/ without index.cfm Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.cfm [L] </IfModule> .htaccess under / : This works I'm presuming this is working because the redirect is to another .cfm page and a 404 handler in Application.cfc ... Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^.*\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{ENV:REDIRECT_STATUS} =404 RewriteRule . /404.cfm$ [L] </IfModule> I've attempted numerous different methods to rewrite .cfm urls ... Adding [PT], [L], [R], [NS], Moving the script to Directory blocks under httpd.conf --- all with the same results ... either the rewrite doesn't work or Apache crashes in an endless loop ... Any help would be greatly appreciated. Below is a single-visit rewrite log snippet for a request to /index.cfm ... the pass-through is taking effect before the rewrite ... cat rewrite_dump_mod | grep index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm * UPDATE * I've managed to figure this out ... it took a while ... Options -Indexes -Multiviews +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^.*/index\.cfm RewriteRule ^(.*)index.cfm http://%{HTTP_HOST}/$1 [R=301,L] </IfModule>

    Read the article

  • nginx + php-fpm - where are my $_GET params?

    - by egis
    I have a strange problem here. I just moved from apache + mod_php to nginx + php-fpm. Everything went fine except this one problem. I have a site, let's say example.com. When I access it like example.com?test=get_param $_SERVER['REQUEST_URI'] is /?test=get_param and there is a $_GET['test'] also. But when I access example.com/ajax/search/?search=get_param $_SERVER['REQUEST_URI'] is /ajax/search/?search=get_param yet there is no $_GET['search'] (there is no $_GET array at all). I'm using Kohana framework. which routes /ajax/search to controller, but I've put phpinfo() at index.php so I'm checking for $_GET variables before framework does anything (this means that disapearing get params aren't frameworks fault). My nginx.conf is like this worker_processes 4; pid logs/nginx.pid; events { worker_connections 1024; } http { index index.html index.php; autoindex on; autoindex_exact_size off; include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 128; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; error_log logs/error.log debug; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 2; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include sites-enabled/*; } and example.conf is like this server { listen 80; server_name www.example.com; rewrite ^ $scheme://example.com$request_uri? permanent; } server { listen 80; server_name example.com; root /var/www/example/; location ~ /\. { return 404; } location / { try_files $uri $uri/ /index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } location ~* ^/(modules|application|system) { return 403; } # serve static files directly location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt)$ { access_log off; expires 30d; } } fastcgi_params is like this fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_param QUERY_STRING $query_string; fastcgi_param PATH_INFO $fastcgi_path_info; What is the problem here? By the way there are few more sites on the same server, both Kohana based and plain php, that are working perfectly.

    Read the article

  • nginx + php-fpm - where are my $_GET params?

    - by egis
    Hello everyone, I have a strange problem here. I just moved from apache + mod_php to nginx + php-fpm. Everything went fine except this one problem. I have a site, let's say example.com. When I access it like example.com?test=get_param $_SERVER['REQUEST_URI'] is /?test=get_param and there is a $_GET['test'] also. But when I access example.com/ajax/search/?search=get_param $_SERVER['REQUEST_URI'] is /ajax/search/?search=get_param yet there is no $_GET['search'] (there is no $_GET array at all). I'm using Kohana framework. which routes /ajax/search to controller, but I've put phpinfo() at index.php so I'm checking for $_GET variables before framework does anything (this means that disapearing get params aren't frameworks fault). My nginx.conf is like this worker_processes 4; pid logs/nginx.pid; events { worker_connections 1024; } http { index index.html index.php; autoindex on; autoindex_exact_size off; include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 128; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; error_log logs/error.log debug; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 2; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include sites-enabled/*; } and example.conf is like this server { listen 80; server_name www.example.com; rewrite ^ $scheme://example.com$request_uri? permanent; } server { listen 80; server_name example.com; root /var/www/example/; location ~ /\. { return 404; } location / { try_files $uri $uri/ /index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } location ~* ^/(modules|application|system) { return 403; } # serve static files directly location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt)$ { access_log off; expires 30d; } } fastcgi_params is like this fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_param QUERY_STRING $query_string; fastcgi_param PATH_INFO $fastcgi_path_info; What is the problem here? By the way there are few more sites on the same server, both Kohana based and plain php, that are working perfectly.

    Read the article

  • Hoster not fulfilling contract: how to get money back?

    - by plua
    For several years, we have as a small webdesign company rented a dedicated server at a large hosting provider. They had several support levels. When we signed up for this, we had very limited in-house knowledge about server maintenance, and were very worried about the security of our server. We therefore took one of the more expensive support packages. An important aspect in this were these claims: [PROVIDER] verifies the availability of the latest security updates and sends you a notification to see if you are interested to have them installed [PROVIDER] verifies the availability of the latest supported software updates and sends you a notification to see if you are interested to have them installed These items were clearly stated on their website as being part of the advantage of this package.; With not enough knowledge about installing and updating such software on a Linux server, we decided to go for this package. We paid a premium of $50 per month over the maintenance package that is next in line ($100 vs $50). Over the years, we have paid several thousand dollars for this service. Then came the moment that I learned more and more about server management. And I found out step by step that our server was horrendously outdated! We had an OS that was hardly updated, our anti-virus was not working because it needed certain more recent packages on the OS, and in general there were a whole bunch of security vulnerabilities and fixes that were lacking. Shocked, I wrote the provider. Turns out, they decided unilaterally that they would not send out any notifications to clients because clients would get too many e-mails. This is a quote from their explanation: [...] We have decided not to spam its clients with OS and security updates and only install them whenever asked by the client I was shocked! They had never mentioned that they would drop this service, and in fact the claims about updating their clients through e-mail was still on their website, after they apparently stopped doing this years ago! Upon finding this out, I requested they refund all that we have paid as a premium over the other package, and make it available as future credit with their own company. I thought this was a very reasonable request. However, they said they would only go back one year and provide credit for this one year. Mails went back and forth, but they were not willing to give credit for the whole period, which I felt I was entitled to. So ultimately I left the hosting company, and filed a complaint with the BBB a while ago. Now, I am not the kind of person who runs to a lawyer for any minor thing, but in this case I am really considering taking action. I have been paying for years for a service I did not receive (the premium package had a few other pluses, but we took it primarily for these two points, and I can prove that we did not use the other benefits). For our small company the hosting costs were a very large part of our budget, and I feel it is very unfair how this large provider just does not care about not fulfilling its obligations. So my question is: what action should I take? Is a lawyer the only next step, or are there other suggestions? And am I right here to claim this money, or are they right that there is some sort of statue of limitations on such claims? Any feedback is appreciated.

    Read the article

  • BIND no longer responds to AXFR Requests

    - by djsumdog
    Recently we moved our primary external DNS server. It has three caching DNS slaves in front of it provided by our ISP. They've told us they've started getting access denied requests when doing zone transfers (AXFR). If I add in my own IPs to the allow-transfer list, I also get a transfer failed when using dig with the AXFR argument. Here is what my bind configuration looks like: options { directory "/var/lib/named"; dump-file "/var/log/named_dump.db"; zone-statistics yes; statistics-file "/var/log/named.stats"; listen-on-v6 { any; }; notify-source 10.19.0.68 port 53; querylog yes; notify yes; allow-transfer { 127.0.0.1; //localhost 1.1.1.1; //public dns slave 1 2.2.2.2; //public dns slave 2 3.3.3.3; //public dns slave 3 }; also-notify { 1.1.1.1; //public dns slave 1 2.2.2.2; //public dns slave 2 3.3.3.3; //public dns slave 3 }; include "/etc/named.d/forwarders.conf"; }; logging { channel simple_log { file "/var/log/bind.log" versions 10 size 3m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ simple_log; }; channel log_zone_transfers { file "/var/log/axfr.log" versions 10 size 3m; print-time yes; print-category yes; print-severity yes; }; category xfer-out { log_zone_transfers; }; channel log_notify { file "/var/log/notify.log" versions 10 size 3m; print-time yes; print-category yes; print-severity yes; }; category notify { log_notify; }; channel queries { file "/var/log/queries.log" versions 10 size 30m; print-time yes; severity info; print-category yes; print-severity yes; }; category queries { queries; }; }; zone "." in { type hint; file "root.hint"; }; zone "localhost" in { type master; file "localhost.zone"; }; zone "0.0.127.in-addr.arpa" in { type master; file "127.0.0.zone"; }; include "/etc/named.conf.include"; zone "example.net " { type master; file "/var/lib/named/master/example.net.hosts"; }; zone "example.com " { type master; file "/var/lib/named/master/example.com.hosts"; }; ## -- other master files -- And the errors in the xfer log look like the following: 29-Oct-2012 14:20:02.806 xfer-out: info: client 1.1.1.1#59069: bad zone transfer request: 'example.com./IN': non-authoritative zone (NOTAUTH) I've tried adding allow-transfer parameters directly on the zone files and still get failed transfers. Any idea what I'm doing wrong?

    Read the article

  • HttpClient POST fails to submit the form

    - by Jayomat
    Hi, I'm writing an app to check for the bus timetable's. Therefor I need to post some data to a html page, submit it, and parse the resulting page with htmlparser. Though it may be asked a lot, can some one help me identify if 1) this page does support post/get (I think it does) 2) which fields I need to use? 3) How to make the actual request? this is my code so far: String url = "http://busspur02.aseag.de/bs.exe?Cmd=RV&Karten=true&DatumT=30&DatumM=4&DatumJ=2010&ZeitH=&ZeitM=&Suchen=%28S%29uchen&GT0=&HT0=&GT1=&HT1="; String charset = "CP1252"; System.out.println("startFrom: "+start_from); System.out.println("goTo: "+destination); //String tag.v List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("HTO", start_from)); params.add(new BasicNameValuePair("HT1", destination)); params.add(new BasicNameValuePair("GTO", "Aachen")); params.add(new BasicNameValuePair("GT1", "Aachen")); params.add(new BasicNameValuePair("DatumT", day)); params.add(new BasicNameValuePair("DatumM", month)); params.add(new BasicNameValuePair("DatumJ", year)); params.add(new BasicNameValuePair("ZeitH", hour)); params.add(new BasicNameValuePair("ZeitM", min)); UrlEncodedFormEntity query = new UrlEncodedFormEntity(params, charset); HttpPost post = new HttpPost(url); post.setEntity(query); InputStream response = new DefaultHttpClient().execute(post).getEntity().getContent(); // Now do your thing with the facebook response. String source = readText(response,"CP1252"); Log.d(TAG_AVV,response.toString()); System.out.println("STREAM "+source); One person also gave me a hint to use firebug to read what's going on at the page, but I don't really understand what to look for, or more precisely, how to use the provided information. I also find it confusing, for example, that when I enter the data by hand, the url says, for example, "....HTO=Kaiserplatz&...", but in Firebug, the same Kaiserplatz is connected to a different field, in this case: \<\td class="Start3" Kaiserplatz <\/td (I inserted \ to make it visible) The last line in my code prints the html page, but without having send a request.. it's printed as if there was no input at all... My app is almost done, I hope someone can help me out to finish it! thanks in advance EDIT: this is what the s.o.p returns: (At some point there actually is some input, but only the destination ???) 04-30 03:15:43.524: INFO/System.out(3303): STREAM <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> 04-30 03:15:43.524: INFO/System.out(3303): <html> 04-30 03:15:43.524: INFO/System.out(3303): <head> 04-30 03:15:43.545: INFO/System.out(3303): <title>Busspur online</title> 04-30 03:15:43.554: INFO/System.out(3303): <base href="http://busspur02.aseag.de"> 04-30 03:15:43.554: INFO/System.out(3303): <meta name="description" content="Busspur im Internet"> 04-30 03:15:43.554: INFO/System.out(3303): <meta name="author" content="Dr. Manfred Enning"> 04-30 03:15:43.554: INFO/System.out(3303): <meta name="AUTH_TYPE" content="Basic"> 04-30 03:15:43.574: INFO/System.out(3303): <meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252"> 04-30 03:15:43.574: INFO/System.out(3303): <meta HTTP-EQUIV="Content-Language" CONTENT="de"> 04-30 03:15:43.574: INFO/System.out(3303): <link rel=stylesheet type="text/css" href="busspur.css"> 04-30 03:15:43.574: INFO/System.out(3303): </head> 04-30 03:15:43.574: INFO/System.out(3303): 04-30 03:15:43.574: INFO/System.out(3303): <body> 04-30 03:15:43.574: INFO/System.out(3303): <table border="0" cellspacing="0" cellpadding="0" width="100%"> 04-30 03:15:43.574: INFO/System.out(3303): <tr> 04-30 03:15:43.584: INFO/System.out(3303): <td align="left" width="25%"><small>Version: 6.8.1.9s2<br>Datenstand: 13.04.2010 04-30 03:15:43.584: INFO/System.out(3303): 04-30 03:15:43.584: INFO/System.out(3303): <br>12.04.2010 - 12.06.2010 04-30 03:15:43.584: INFO/System.out(3303): <br>1663 04-30 03:15:43.584: INFO/System.out(3303): 3D3B9</small> 04-30 03:15:43.584: INFO/System.out(3303): </td> 04-30 03:15:43.584: INFO/System.out(3303): 04-30 03:15:43.584: INFO/System.out(3303): <td align="center" width="50%"> 04-30 03:15:43.584: INFO/System.out(3303): <a href="/bs.exe/SL?Sprache=Nederlands&amp;SID=3D3B9"><img src="http://www.busspur.de/logos/nederlands.gif" alt="Nederlands" border="0" Width="32" Height="22"></a><a href="/bs.exe/SL?Sprache=English&amp;SID=3D3B9"><img src="http://www.busspur.de/logos/english.gif" alt="English" border="0" Width="32" Height="22"></a><a href="/bs.exe/SL?Sprache=Francais&amp;SID=3D3B9"><img src="http://www.busspur.de/logos/francais.gif" alt="Francais" border="0" Width="32" Height="22"></a> 04-30 03:15:43.584: INFO/System.out(3303): </td> 04-30 03:15:43.584: INFO/System.out(3303): 04-30 03:15:43.594: INFO/System.out(3303): <td align="right" width="25%"> 04-30 03:15:43.594: INFO/System.out(3303): <a href="http://www.avv.de/"><img src="/logos/avvlogo.gif" border="0" alt="AVV"></a> 04-30 03:15:43.594: INFO/System.out(3303): </td> 04-30 03:15:43.594: INFO/System.out(3303): </tr> 04-30 03:15:43.594: INFO/System.out(3303): </table> 04-30 03:15:43.594: INFO/System.out(3303): 04-30 03:15:43.594: INFO/System.out(3303): <!-- Kopfbereich (automatisch erzeugt) --> 04-30 03:15:43.594: INFO/System.out(3303): <div align="center"> 04-30 03:15:43.594: INFO/System.out(3303): 04-30 03:15:43.604: INFO/System.out(3303): <H2>Busspur-Online <i>Verbindungsabfrage</i></H2> 04-30 03:15:43.604: INFO/System.out(3303): </div> 04-30 03:15:43.604: INFO/System.out(3303): <!-- Ende Kopfbereich --> 04-30 03:15:43.604: INFO/System.out(3303): 04-30 03:15:43.604: INFO/System.out(3303): <!-- Ausgabebereich (automatisch erzeugt) --> 04-30 03:15:43.604: INFO/System.out(3303): <div align="center"> 04-30 03:15:43.614: INFO/System.out(3303): <p></p> 04-30 03:15:43.614: INFO/System.out(3303): <p></p> 04-30 03:15:43.614: INFO/System.out(3303): 04-30 03:15:43.614: INFO/System.out(3303): 04-30 03:15:43.624: INFO/System.out(3303): </div> 04-30 03:15:43.624: INFO/System.out(3303): <!-- Ende Ausgabebereich --> 04-30 03:15:43.634: INFO/System.out(3303): 04-30 03:15:43.634: INFO/System.out(3303): <!-- Fussnotenbereich (automatisch erzeugt) --> 04-30 03:15:43.634: INFO/System.out(3303): <div align="left"> 04-30 03:15:43.634: INFO/System.out(3303): 04-30 03:15:43.634: INFO/System.out(3303): 04-30 03:15:43.634: INFO/System.out(3303): </div> 04-30 03:15:43.634: INFO/System.out(3303): <!-- Ende Fussnotenbereich --> 04-30 03:15:43.634: INFO/System.out(3303): 04-30 03:15:43.634: INFO/System.out(3303): <!-- Nachschlageliste (automatisch erzeugt) --> 04-30 03:15:43.634: INFO/System.out(3303): <div align="center"> 04-30 03:15:43.644: INFO/System.out(3303): 04-30 03:15:43.644: INFO/System.out(3303): </div> 04-30 03:15:43.644: INFO/System.out(3303): <!-- Ende Nachschlageliste --> 04-30 03:15:43.644: INFO/System.out(3303): 04-30 03:15:43.644: INFO/System.out(3303): 04-30 03:15:43.644: INFO/System.out(3303): <!-- Eingabeformular --> 04-30 03:15:43.644: INFO/System.out(3303): 04-30 03:15:43.644: INFO/System.out(3303): 04-30 03:15:43.644: INFO/System.out(3303): <!-- Eingabeformular --> 04-30 03:15:43.644: INFO/System.out(3303): <form name="Maske" action="/bs.exe" method="get"> 04-30 03:15:43.644: INFO/System.out(3303): 04-30 03:15:43.644: INFO/System.out(3303): <input type="hidden" name="SID" value="3D3B9"> 04-30 03:15:43.644: INFO/System.out(3303): <input type="hidden" name="ScreenX" value=""> 04-30 03:15:43.654: INFO/System.out(3303): <input type="hidden" name="ScreenY" value=""> 04-30 03:15:43.654: INFO/System.out(3303): <input type="hidden" class="hiddenForm" name="CMD" value="CR" /> 04-30 03:15:43.654: INFO/System.out(3303): 04-30 03:15:43.654: INFO/System.out(3303): 04-30 03:15:43.654: INFO/System.out(3303): <input TYPE="Submit" name="Suchen" value="S" tabindex="20" style="visibility:hidden"> 04-30 03:15:43.654: INFO/System.out(3303): 04-30 03:15:43.654: INFO/System.out(3303): <table align="center" border="0" cellspacing="0" cellpadding="2"> 04-30 03:15:43.654: INFO/System.out(3303): <tr> 04-30 03:15:43.654: INFO/System.out(3303): <td class="Haupt"> 04-30 03:15:43.654: INFO/System.out(3303): 04-30 03:15:43.674: INFO/System.out(3303): <table border="0" cellspacing="0" cellpadding="2"> 04-30 03:15:43.674: INFO/System.out(3303): <!-- 1.Zeile Startauswahl --> 04-30 03:15:43.674: INFO/System.out(3303): <tr> 04-30 03:15:43.674: INFO/System.out(3303): <td rowspan="2" class="Start1"> 04-30 03:15:43.674: INFO/System.out(3303): Start 04-30 03:15:43.685: INFO/System.out(3303): </td> 04-30 03:15:43.685: INFO/System.out(3303): 04-30 03:15:43.685: INFO/System.out(3303): <td class="Start2" height="25"> 04-30 03:15:43.685: INFO/System.out(3303): Stadt/Gemeinde 04-30 03:15:43.685: INFO/System.out(3303): </td> 04-30 03:15:43.685: INFO/System.out(3303): 04-30 03:15:43.685: INFO/System.out(3303): <td class="Start3"> 04-30 03:15:43.685: INFO/System.out(3303): <input type="text" name="GT0" value="" tabindex="1" /> 04-30 03:15:43.704: INFO/System.out(3303): 04-30 03:15:43.704: INFO/System.out(3303): </td> 04-30 03:15:43.704: INFO/System.out(3303): 04-30 03:15:43.704: INFO/System.out(3303): 04-30 03:15:43.704: INFO/System.out(3303): <td rowspan="2" class="Start4"> 04-30 03:15:43.714: INFO/System.out(3303): <input type="submit" name="Map0" value="Karte" tabindex="100" /> 04-30 03:15:43.724: INFO/System.out(3303): 04-30 03:15:43.724: INFO/System.out(3303): </td> 04-30 03:15:43.724: INFO/System.out(3303): 04-30 03:15:43.724: INFO/System.out(3303): 04-30 03:15:43.724: INFO/System.out(3303): </tr> 04-30 03:15:43.724: INFO/System.out(3303): 04-30 03:15:43.724: INFO/System.out(3303): <tr> 04-30 03:15:43.734: INFO/System.out(3303): <td class="Start2" height="25"> 04-30 03:15:43.734: INFO/System.out(3303): <select name="T0" id="efaT0"> 04-30 03:15:43.734: INFO/System.out(3303): <option value="A" >Adresse 04-30 03:15:43.734: INFO/System.out(3303): <option value="H" selected="selected">Haltestelle 04-30 03:15:43.734: INFO/System.out(3303): <option value="Z" >Bes. Ziel 04-30 03:15:43.734: INFO/System.out(3303): </select> 04-30 03:15:43.734: INFO/System.out(3303): 04-30 03:15:43.734: INFO/System.out(3303): </td> 04-30 03:15:43.734: INFO/System.out(3303): 04-30 03:15:43.734: INFO/System.out(3303): <td class="Start3"> 04-30 03:15:43.734: INFO/System.out(3303): <input type="text" name="HT0" value="" tabindex="2" /> 04-30 03:15:43.734: INFO/System.out(3303): 04-30 03:15:43.745: INFO/System.out(3303): </td> 04-30 03:15:43.754: INFO/System.out(3303): 04-30 03:15:43.774: INFO/System.out(3303): </tr> 04-30 03:15:43.784: INFO/System.out(3303): 04-30 03:15:43.784: INFO/System.out(3303): <!-- 2.Zeile Ziel oder ViaAuswahl --> 04-30 03:15:43.784: INFO/System.out(3303): 04-30 03:15:43.805: INFO/System.out(3303): <tr> 04-30 03:15:43.834: INFO/System.out(3303): <td rowspan="2" class="Ziel1"> 04-30 03:15:43.834: INFO/System.out(3303): Ziel 04-30 03:15:43.834: INFO/System.out(3303): </td> 04-30 03:15:43.844: INFO/System.out(3303): 04-30 03:15:43.844: INFO/System.out(3303): <td class="Ziel2" height="25"> 04-30 03:15:43.844: INFO/System.out(3303): Stadt/Gemeinde 04-30 03:15:43.844: INFO/System.out(3303): </td> 04-30 03:15:43.854: INFO/System.out(3303): 04-30 03:15:43.854: INFO/System.out(3303): <td class="Ziel3"> 04-30 03:15:43.854: INFO/System.out(3303): Aachen 04-30 03:15:43.864: INFO/System.out(3303): </td> 04-30 03:15:43.874: INFO/System.out(3303): 04-30 03:15:43.874: INFO/System.out(3303): 04-30 03:15:43.884: INFO/System.out(3303): <td rowspan="2" class="Ziel4"> 04-30 03:15:43.884: INFO/System.out(3303): <input type="submit" name="Map1" value="Karte" tabindex="101" /> 04-30 03:15:43.884: INFO/System.out(3303): 04-30 03:15:43.884: INFO/System.out(3303): </td> 04-30 03:15:43.884: INFO/System.out(3303): 04-30 03:15:43.884: INFO/System.out(3303): 04-30 03:15:43.884: INFO/System.out(3303): </tr> 04-30 03:15:43.884: INFO/System.out(3303): 04-30 03:15:43.884: INFO/System.out(3303): <tr> 04-30 03:15:43.884: INFO/System.out(3303): <td class="Ziel2" height="25"> 04-30 03:15:43.894: INFO/System.out(3303): <small></small> 04-30 03:15:43.894: INFO/System.out(3303): </td> 04-30 03:15:43.894: INFO/System.out(3303): <td class="Ziel3"> 04-30 03:15:43.894: INFO/System.out(3303): Karlsgraben 04-30 03:15:43.904: INFO/System.out(3303): </td> 04-30 03:15:43.904: INFO/System.out(3303): </tr> 04-30 03:15:43.904: INFO/System.out(3303): 04-30 03:15:43.914: INFO/System.out(3303): 04-30 03:15:43.924: INFO/System.out(3303): 04-30 03:15:43.934: INFO/System.out(3303): 04-30 03:15:43.934: INFO/System.out(3303): 04-30 03:15:43.934: INFO/System.out(3303): 04-30 03:15:43.934: INFO/System.out(3303): <!-- 3.Zeile Datum/Zeit/Intervall --> 04-30 03:15:43.934: INFO/System.out(3303): <tr> 04-30 03:15:43.944: INFO/System.out(3303): <td rowspan="3" class="Zeit1"> 04-30 03:15:43.944: INFO/System.out(3303): Zeit 04-30 03:15:43.944: INFO/System.out(3303): </td> 04-30 03:15:43.944: INFO/System.out(3303): <td class="Datum2"> 04-30 03:15:43.944: INFO/System.out(3303): Datum 04-30 03:15:43.944: INFO/System.out(3303): </td> 04-30 03:15:43.944: INFO/System.out(3303): 04-30 03:15:43.944: INFO/System.out(3303): <!-- Für Abfragen ohne Karte alternativ Zeile ohne colspan hinzufügen --> 04-30 03:15:43.954: INFO/System.out(3303): 04-30 03:15:43.964: INFO/System.out(3303): <td class="Datum3" height="25" colspan="2"> 04-30 03:15:43.984: INFO/System.out(3303): <select name="DatumT" tabindex="10" id="efaDatumT"> 04-30 03:15:43.984: INFO/System.out(3303): <option >1</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >2</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >3</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >4</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >5</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >6</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >7</option> 04-30 03:15:43.984: INFO/System.out(3303): <option >8</option> 04-30 03:15:43.994: INFO/System.out(3303): <option >9</option> 04-30 03:15:43.994: INFO/System.out(3303): <option >10</option> 04-30 03:15:43.994: INFO/System.out(3303): <option >11</option> 04-30 03:15:43.994: INFO/System.out(3303): <option >12</option> 04-30 03:15:44.005: INFO/System.out(3303): <option >13</option> 04-30 03:15:44.024: INFO/System.out(3303): <option >14</option> 04-30 03:15:44.034: INFO/System.out(3303): <option >15</option> 04-30 03:15:44.034: INFO/System.out(3303): <option >16</option> 04-30 03:15:44.034: INFO/System.out(3303): <option >17</option> 04-30 03:15:44.034: INFO/System.out(3303): <option >18</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >19</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >20</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >21</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >22</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >23</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >24</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >25</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >26</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >27</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >28</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >29</option> 04-30 03:15:44.044: INFO/System.out(3303): <option selected="selected">30</option> 04-30 03:15:44.044: INFO/System.out(3303): <option >31</option> 04-30 03:15:44.055: INFO/System.out(3303): </select> 04-30 03:15:44.055: INFO/System.out(3303): . 04-30 03:15:44.055: INFO/System.out(3303): <select name="DatumM" tabindex="11" id="efaDatumM"> 04-30 03:15:44.055: INFO/System.out(3303): <option >1</option> 04-30 03:15:44.055: INFO/System.out(3303): <option >2</option> 04-30 03:15:44.055: INFO/System.out(3303): <option >3</option> 04-30 03:15:44.064: INFO/System.out(3303): <option selected="selected">4</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >5</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >6</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >7</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >8</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >9</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >10</option> 04-30 03:15:44.064: INFO/System.out(3303): <option >11</option> 04-30 03:15:44.085: INFO/System.out(3303): <option >12</option> 04-30 03:15:44.085: INFO/System.out(3303): </select> 04-30 03:15:44.085: INFO/System.out(3303): . 04-30 03:15:44.085: INFO/System.out(3303): <select name="DatumJ" tabindex="12" id="efaDatumJ"> 04-30 03:15:44.095: INFO/System.out(3303): <option >2009</option> 04-30 03:15:44.095: INFO/System.out(3303): <option selected="selected">2010</option> 04-30 03:15:44.095: INFO/System.out(3303): <option >2011</option> 04-30 03:15:44.095: INFO/System.out(3303): </select> 04-30 03:15:44.095: INFO/System.out(3303): 04-30 03:15:44.095: INFO/System.out(3303): </td> 04-30 03:15:44.095: INFO/System.out(3303): 04-30 03:15:44.105: INFO/System.out(3303): </tr> 04-30 03:15:44.115: INFO/System.out(3303): 04-30 03:15:44.115: INFO/System.out(3303): <tr> 04-30 03:15:44.115: INFO/System.out(3303): <td class="Uhrzeit2"> 04-30 03:15:44.115: INFO/System.out(3303): <input type="radio" name="AbfAnk" value="Abf" checked />Abfahrten ab<br /> 04-30 03:15:44.115: INFO/System.out(3303): <input type="radio" name="AbfAnk" value="Ank" />Ankünfte bis 04-30 03:15:44.115: INFO/System.out(3303): 04-30 03:15:44.115: INFO/System.out(3303): </td> 04-30 03:15:44.125: INFO/System.out(3303): <td class="Uhrzeit3" height="25"> 04-30 03:15:44.125: INFO/System.out(3303): <select name="ZeitH" tabindex="14" id="efaZeitH"> 04-30 03:15:44.125: INFO/System.out(3303): <option >0</option> 04-30 03:15:44.125: INFO/System.out(3303): <option >1</option> 04-30 03:15:44.125: INFO/System.out(3303): <option >2</option> 04-30 03:15:44.135: INFO/System.out(3303): <option >3</option> 04-30 03:15:44.135: INFO/System.out(3303): <option >4</option> 04-30 03:15:44.135: INFO/System.out(3303): <option >5</option> 04-30 03:15:44.135: INFO/System.out(3303): <option >6</option> 04-30 03:15:44.135: INFO/System.out(3303): <option >7</option> 04-30 03:15:44.135: INFO/System.out(3303): <option >8</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >9</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >10</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >11</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >12</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >13</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >14</option> 04-30 03:15:44.145: INFO/System.out(3303): <option selected="selected">15</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >16</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >17</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >18</option> 04-30 03:15:44.145: INFO/System.out(3303): <option >19</option> 04-30 03:15:44.155: INFO/System.out(3303): <option >20</option> 04-30 03:15:44.155: INFO/System.out(3303): <option >21</option> 04-30 03:15:44.155: INFO/System.out(3303): <option >22</option> 04-30 03:15:44.155: INFO/System.out(3303): <option >23</option> 04-30 03:15:44.155: INFO/System.out(3303): </select> 04-30 03:15:44.155: INFO/System.out(3303): : 04-30 03:15:44.155: INFO/System.out(3303): <select name="ZeitM" tabindex="15" id="efaZeitM"> 04-30 03:15:44.155: INFO/System.out(3303): <option >00</option> 04-30 03:15:44.155: INFO/System.out(3303): <option selected="selected">15</option> 04-30 03:15:44.155: INFO/System.out(3303): <option >30</option> 04-30 03:15:44.155: INFO/System.out(3303): <option >45</option> 04-30 03:15:44.155: INFO/System.out(3303): </select> 04-30 03:15:44.155: INFO/System.out(3303): 04-30 03:15:44.155: INFO/System.out(3303): </td> 04-30 03:15:44.155: INFO/System.out(3303): 04-30 03:15:44.165: INFO/System.out(3303): <td class="Uhrzeit2">&nbsp;</td> 04-30 03:15:44.165: INFO/System.out(3303): 04-30 03:15:44.165: INFO/System.out(3303): </tr> 04-30 03:15:44.165: INFO/System.out(3303): 04-30 03:15:44.165: INFO/System.out(3303): <tr> 04-30 03:15:44.165: INFO/System.out(3303): <td class="Intervall2"> 04-30 03:15:44.165: INFO/System.out(3303): Intervall 04-30 03:15:44.165: INFO/System.out(3303): </td> 04-30 03:15:44.184: INFO/System.out(3303): 04-30 03:15:44.184: INFO/System.out(3303): <td class="Intervall3" height="25"> 04-30 03:15:44.184: INFO/System.out(3303): <select name="Intervall" tabindex="13" id="efaIntervall"> 04-30 03:15:44.184: INFO/System.out(3303): <option value="60" >1 h</option> 04-30 03:15:44.184: INFO/System.out(3303): <option value="120" >2 h</option> 04-30 03:15:44.184: INFO/System.out(3303): <option value="240" >4 h</option> 04-30 03:15:44.184: INFO/System.out(3303): <option value="480" >8 h</option> 04-30 03:15:44.184: INFO/System.out(3303): <option value="1800" >ganzer Tag</option> 04-30 03:15:44.194: INFO/System.out(3303): </select> 04-30 03:15:44.194: INFO/System.out(3303): 04-30 03:15:44.204: INFO/System.out(3303): </td> 04-30 03:15:44.204: INFO/System.out(3303): 04-30 03:15:44.204: INFO/System.out(3303): <td class="Intervall3">&nbsp; 04-30 03:15:44.204: INFO/System.out(3303): 04-30 03:15:44.204: INFO/System.out(3303): </tr> 04-30 03:15:44.204: INFO/System.out(3303): </table> 04-30 03:15:44.204: INFO/System.out(3303): 04-30 03:15:44.204: INFO/System.out(3303): </td> 04-30 03:15:44.204: INFO/System.out(3303): 04-30 03:15:44.204: INFO/System.out(3303): <td class="Schalter" valign="top"> 04-30 03:15:44.204: INFO/System.out(3303): <table class="Schalter"> 04-30 03:15:44.204: INFO/System.out(3303): <!-- Buttons --> 04-30 03:15:44.204: INFO/System.out(3303): <tr> 04-30 03:15:44.204: INFO/System.out(3303): <td class="Schalter" align="center"> 04-30 03:15:44.226: INFO/System.out(3303): <input TYPE="Submit" accesskey="s" class="SuchenBtn" name="Suchen" tabindex="20" VALUE="(S)uchen"> 04-30 03:15:44.226: INFO/System.out(3303): </td> 04-30 03:15:44.226: INFO/System.out(3303): </tr> 04-30 03:15:44.226: INFO/System.out(3303): 04-30 03:15:44.226: INFO/System.out(3303): 04-30 03:15:44.226: INFO/System.out(3303): <tr> 04-30 03:15:44.226: INFO/System.out(3303): <td class="Schalter" align="center"> 04-30 03:15:44.226: INFO/System.out(3303): <input TYPE="Submit" accesskey="o" name="Optionen" tabindex="22" VALUE="(O)ptionen"> 04-30 03:15:44.226: INFO/System.out(3303): </td> 04-30 03:15:44.226: INFO/System.out(3303): </tr> 04-30 03:15:44.226: INFO/System.out(3303): 04-30 03:15:44.226: INFO/System.out(3303): 04-30 03:15:44.226: INFO/System.out(3303): <tr> 04-30 03:15:44.226: INFO/System.out(3303): <td class="Schalter" align="center"> 04-30 03:15:44.226: INFO/System.out(3303): <input TYPE="Button" accesskey="z" tabindex="24" VALUE="(Z)urück" onClick="history.back()"> 04-30 03:15:44.226: INFO/System.out(3303): </td> 04-30 03:15:44.226: INFO/System.out(3303): </tr> 04-30 03:15:44.226: INFO/System.out(3303): <tr> 04-30 03:15:44.226: INFO/System.out(3303): <td class="Schalter" align="center"> 04-30 03:15:44.226: INFO/System.out(3303): <input TYPE="Button" accesskey="h" tabindex="25" VALUE="(H)ilfe" onClick="self.location.href='/bs.exe/FF?N=hilfe&amp;SID=3D3B9'"> 04-30 03:15:44.226: INFO/System.out(3303): </td> 04-30 03:15:44.235: INFO/System.out(3303): </tr> 04-30 03:15:44.235: INFO/System.out(3303): <tr> 04-30 03:15:44.235: INFO/System.out(3303): <td class="Schalter" align="center"> 04-30 03:15:44.235: INFO/System.out(3303): <input TYPE="Submit" accesskey="n" tabindex="26" name="Loeschen" VALUE="(N)eue Suche"> 04-30 03:15:44.235: INFO/System.out(3303): </td> 04-30 03:15:44.235: INFO/System.out(3303): </tr> 04-30 03:15:44.235: INFO/System.out(3303): 04-30 03:15:44.235: INFO/System.out(3303): <tr> 04-30 03:15:44.235: INFO/System.out(3303): 04-30 03:15:44.244: INFO/System.out(3303): <td class="Schalter" align="center"> 04-30 03:15:44.244: INFO/System.out(3303): <input TYPE="Button" accesskey="a" tabindex="27" VALUE="H(a)ltestelle" onClick="self.location.href='/bs.exe/RHFF?Karten=true?N=Result&amp;SID=3D3B9'"> 04-30 03:15:44.244: INFO/System.out(3303): </td> 04-30 03:15:44.244: INFO/System.out(3303): 04-30 03:15:44.244: INFO/System.out(3303): </tr> 04-30 03:15:44.244: INFO/System.out(3303): </table> 04-30 03:15:44.254: INFO/System.out(3303): 04-30 03:15:44.254: INFO/System.out(3303): </td> 04-30 03:15:44.254: INFO/System.out(3303): </tr> 04-30 03:15:44.254: INFO/System.out(3303): </table> 04-30 03:15:44.254: INFO/System.out(3303): </form> 04-30 03:15:44.254: INFO/System.out(3303): 04-30 03:15:44.254: INFO/System.out(3303): 04-30 03:15:44.254: INFO/System.out(3303): <!-- Meldungsbereich (automatisch erzeugt) --> 04-30 03:15:44.254: INFO/System.out(3303): <div align="center" id="meldungen"> 04-30 03:15:44.265: INFO/System.out(3303): <table class="Bedienhinweise"><tr><td rowspan="2"><img SRC="http://www.busspur.de/logos/hinweis.png" ALIGN="top" alt="Symbol" WIDTH="32" HEIGHT="20">&nbsp;</td><td rowspan="2">Start</td><td>Geben Sie den Namen der Stadt/Gemeinde ein</td></tr><tr><td>Geben Sie den Namen der Haltestelle ein</td></tr></table> 04-30 03:15:44.265: INFO/System.out(3303): </div> 04-30 03:15:44.265:

    Read the article

  • how to use 3D map Actionscript class in mxml file for display map.

    - by nemade-vipin
    hello friends, I have created the application in which I have to use 3D map Action Script class in mxml file to display a map in form. that is in tab navigator last tab. My ActionScript 3D map class is(FlyingDirections):- package src.SBTSCoreObject { import src.SBTSCoreObject.JSONDecoder; import com.google.maps.InfoWindowOptions; import com.google.maps.LatLng; import com.google.maps.LatLngBounds; import com.google.maps.Map3D; import com.google.maps.MapEvent; import com.google.maps.MapOptions; import com.google.maps.MapType; import com.google.maps.MapUtil; import com.google.maps.View; import com.google.maps.controls.NavigationControl; import com.google.maps.geom.Attitude; import com.google.maps.interfaces.IPolyline; import com.google.maps.overlays.Marker; import com.google.maps.overlays.MarkerOptions; import com.google.maps.services.Directions; import com.google.maps.services.DirectionsEvent; import com.google.maps.services.Route; import flash.display.Bitmap; import flash.display.DisplayObject; import flash.display.DisplayObjectContainer; import flash.display.Loader; import flash.display.LoaderInfo; import flash.display.Sprite; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.MouseEvent; import flash.events.TimerEvent; import flash.filters.DropShadowFilter; import flash.geom.Point; import flash.net.URLLoader; import flash.net.URLRequest; import flash.net.navigateToURL; import flash.text.TextField; import flash.text.TextFieldAutoSize; import flash.text.TextFormat; import flash.utils.Timer; import flash.utils.getTimer; public class FlyingDirections extends Map3D { /** * Panoramio home page. */ private static const PANORAMIO_HOME:String = "http://www.panoramio.com/"; /** * The icon for the car. */ [Embed("assets/car-icon-24px.png")] private static const Car:Class; /** * The Panoramio icon. */ [Embed("assets/iw_panoramio.png")] private static const PanoramioIcon:Class; /** * We animate a zoom in to the start the route before the car starts * to move. This constant sets the time in seconds over which this * zoom occurs. */ private static const LEAD_IN_DURATION:Number = 3; /** * Duration of the trip in seconds. */ private static const TRIP_DURATION:Number = 40; /** * Constants that define the geometry of the Panoramio image markers. */ private static const BORDER_T:Number = 3; private static const BORDER_L:Number = 10; private static const BORDER_R:Number = 10; private static const BORDER_B:Number = 3; private static const GAP_T:Number = 2; private static const GAP_B:Number = 1; private static const IMAGE_SCALE:Number = 1; /** * Trajectory that the camera follows over time. Each element is an object * containing properties used to generate parameter values for flyTo(..). * fraction = 0 corresponds to the start of the trip; fraction = 1 * correspondsto the end of the trip. */ private var FLY_TRAJECTORY:Array = [ { fraction: 0, zoom: 6, attitude: new Attitude(0, 0, 0) }, { fraction: 0.2, zoom: 8.5, attitude: new Attitude(30, 30, 0) }, { fraction: 0.5, zoom: 9, attitude: new Attitude(30, 40, 0) }, { fraction: 1, zoom: 8, attitude: new Attitude(50, 50, 0) }, { fraction: 1.1, zoom: 8, attitude: new Attitude(130, 50, 0) }, { fraction: 1.2, zoom: 8, attitude: new Attitude(220, 50, 0) }, ]; /** * Number of panaramio photos for which we load data. We&apos;ll select a * subset of these approximately evenly spaced along the route. */ private static const NUM_GEOTAGGED_PHOTOS:int = 50; /** * Number of panaramio photos that we actually show. */ private static const NUM_SHOWN_PHOTOS:int = 7; /** * Scaling between real trip time and animation time. */ private static const SCALE_TIME:Number = 0.001; /** * getTimer() value at the instant that we start the trip. If this is 0 then * we have not yet started the car moving. */ private var startTimer:int = 0; /** * The current route. */ private var route:Route; /** * The polyline for the route. */ private var polyline:IPolyline; /** * The car marker. */ private var marker:Marker; /** * The cumulative duration in seconds over each step in the route. * cumulativeStepDuration[0] is 0; cumulativeStepDuration[1] adds the * duration of step 0; cumulativeStepDuration[2] adds the duration * of step 1; etc. */ private var cumulativeStepDuration:/*Number*/Array = []; /** * The cumulative distance in metres over each vertex in the route polyline. * cumulativeVertexDistance[0] is 0; cumulativeVertexDistance[1] adds the * distance to vertex 1; cumulativeVertexDistance[2] adds the distance to * vertex 2; etc. */ private var cumulativeVertexDistance:Array; /** * Array of photos loaded from Panoramio. This array has the same format as * the &apos;photos&apos; property within the JSON returned by the Panoramio API * (see http://www.panoramio.com/api/), with additional properties added to * individual photo elements to hold the loader structures that fetch * the actual images. */ private var photos:Array = []; /** * Array of polyline vertices, where each element is in world coordinates. * Several computations can be faster if we can use world coordinates * instead of LatLng coordinates. */ private var worldPoly:/*Point*/Array; /** * Whether the start button has been pressed. */ private var startButtonPressed:Boolean = false; /** * Saved event from onDirectionsSuccess call. */ private var directionsSuccessEvent:DirectionsEvent = null; /** * Start button. */ private var startButton:Sprite; /** * Alpha value used for the Panoramio image markers. */ private var markerAlpha:Number = 0; /** * Index of the current driving direction step. Used to update the * info window content each time we progress to a new step. */ private var currentStepIndex:int = -1; /** * The fly directions map constructor. * * @constructor */ public function FlyingDirections() { key="ABQIAAAA7QUChpcnvnmXxsjC7s1fCxQGj0PqsCtxKvarsoS-iqLdqZSKfxTd7Xf-2rEc_PC9o8IsJde80Wnj4g"; super(); addEventListener(MapEvent.MAP_PREINITIALIZE, onMapPreinitialize); addEventListener(MapEvent.MAP_READY, onMapReady); } /** * Handles map preintialize. Initializes the map center and zoom level. * * @param event The map event. */ private function onMapPreinitialize(event:MapEvent):void { setInitOptions(new MapOptions({ center: new LatLng(-26.1, 135.1), zoom: 4, viewMode: View.VIEWMODE_PERSPECTIVE, mapType:MapType.PHYSICAL_MAP_TYPE })); } /** * Handles map ready and looks up directions. * * @param event The map event. */ private function onMapReady(event:MapEvent):void { enableScrollWheelZoom(); enableContinuousZoom(); addControl(new NavigationControl()); // The driving animation will be updated on every frame. addEventListener(Event.ENTER_FRAME, enterFrame); addStartButton(); // We start the directions loading now, so that we&apos;re ready to go when // the user hits the start button. var directions:Directions = new Directions(); directions.addEventListener( DirectionsEvent.DIRECTIONS_SUCCESS, onDirectionsSuccess); directions.addEventListener( DirectionsEvent.DIRECTIONS_FAILURE, onDirectionsFailure); directions.load("48 Pirrama Rd, Pyrmont, NSW to Byron Bay, NSW"); } /** * Adds a big blue start button. */ private function addStartButton():void { startButton = new Sprite(); startButton.buttonMode = true; startButton.addEventListener(MouseEvent.CLICK, onStartClick); startButton.graphics.beginFill(0x1871ce); startButton.graphics.drawRoundRect(0, 0, 150, 100, 10, 10); startButton.graphics.endFill(); var startField:TextField = new TextField(); startField.autoSize = TextFieldAutoSize.LEFT; startField.defaultTextFormat = new TextFormat("_sans", 20, 0xffffff, true); startField.text = "Start!"; startButton.addChild(startField); startField.x = 0.5 * (startButton.width - startField.width); startField.y = 0.5 * (startButton.height - startField.height); startButton.filters = [ new DropShadowFilter() ]; var container:DisplayObjectContainer = getDisplayObject() as DisplayObjectContainer; container.addChild(startButton); startButton.x = 0.5 * (container.width - startButton.width); startButton.y = 0.5 * (container.height - startButton.height); var panoField:TextField = new TextField(); panoField.autoSize = TextFieldAutoSize.LEFT; panoField.defaultTextFormat = new TextFormat("_sans", 11, 0x000000, true); panoField.text = "Photos provided by Panoramio are under the copyright of their owners."; container.addChild(panoField); panoField.x = container.width - panoField.width - 5; panoField.y = 5; } /** * Handles directions success. Starts flying the route if everything * is ready. * * @param event The directions event. */ private function onDirectionsSuccess(event:DirectionsEvent):void { directionsSuccessEvent = event; flyRouteIfReady(); } /** * Handles click on the start button. Starts flying the route if everything * is ready. */ private function onStartClick(event:MouseEvent):void { startButton.removeEventListener(MouseEvent.CLICK, onStartClick); var container:DisplayObjectContainer = getDisplayObject() as DisplayObjectContainer; container.removeChild(startButton); startButtonPressed = true; flyRouteIfReady(); } /** * If we have loaded the directions and the start button has been pressed * start flying the directions route. */ private function flyRouteIfReady():void { if (!directionsSuccessEvent || !startButtonPressed) { return; } var directions:Directions = directionsSuccessEvent.directions; // Extract the route. route = directions.getRoute(0); // Draws the polyline showing the route. polyline = directions.createPolyline(); addOverlay(directions.createPolyline()); // Creates a car marker that is moved along the route. var car:DisplayObject = new Car(); marker = new Marker(route.startGeocode.point, new MarkerOptions({ icon: car, iconOffset: new Point(-car.width / 2, -car.height) })); addOverlay(marker); transformPolyToWorld(); createCumulativeArrays(); // Load Panoramio data for the region covered by the route. loadPanoramioData(directions.bounds); var duration:Number = route.duration; // Start a timer that will trigger the car moving after the lead in time. var leadInTimer:Timer = new Timer(LEAD_IN_DURATION * 1000, 1); leadInTimer.addEventListener(TimerEvent.TIMER, onLeadInDone); leadInTimer.start(); var flyTime:Number = -LEAD_IN_DURATION; // Set up the camera flight trajectory. for each (var flyStep:Object in FLY_TRAJECTORY) { var time:Number = flyStep.fraction * duration; var center:LatLng = latLngAt(time); var scaledTime:Number = time * SCALE_TIME; var zoom:Number = flyStep.zoom; var attitude:Attitude = flyStep.attitude; var elapsed:Number = scaledTime - flyTime; flyTime = scaledTime; flyTo(center, zoom, attitude, elapsed); } } /** * Loads Panoramio data for the route bounds. We load data about more photos * than we need, then select a subset lying along the route. * @param bounds Bounds within which to fetch images. */ private function loadPanoramioData(bounds:LatLngBounds):void { var params:Object = { order: "popularity", set: "full", from: "0", to: NUM_GEOTAGGED_PHOTOS.toString(10), size: "small", minx: bounds.getWest(), miny: bounds.getSouth(), maxx: bounds.getEast(), maxy: bounds.getNorth() }; var loader:URLLoader = new URLLoader(); var request:URLRequest = new URLRequest( "http://www.panoramio.com/map/get_panoramas.php?" + paramsToString(params)); loader.addEventListener(Event.COMPLETE, onPanoramioDataLoaded); loader.addEventListener(IOErrorEvent.IO_ERROR, onPanoramioDataFailed); loader.load(request); } /** * Transforms the route polyline to world coordinates. */ private function transformPolyToWorld():void { var numVertices:int = polyline.getVertexCount(); worldPoly = new Array(numVertices); for (var i:int = 0; i < numVertices; ++i) { var vertex:LatLng = polyline.getVertex(i); worldPoly[i] = fromLatLngToPoint(vertex, 0); } } /** * Returns the time at which the route approaches closest to the * given point. * @param world Point in world coordinates. * @return Route time at which the closest approach occurs. */ private function getTimeOfClosestApproach(world:Point):Number { var minDistSqr:Number = Number.MAX_VALUE; var numVertices:int = worldPoly.length; var x:Number = world.x; var y:Number = world.y; var minVertex:int = 0; for (var i:int = 0; i < numVertices; ++i) { var dx:Number = worldPoly[i].x - x; var dy:Number = worldPoly[i].y - y; var distSqr:Number = dx * dx + dy * dy; if (distSqr < minDistSqr) { minDistSqr = distSqr; minVertex = i; } } return cumulativeVertexDistance[minVertex]; } /** * Returns the array index of the first element that compares greater than * the given value. * @param ordered Ordered array of elements. * @param value Value to use for comparison. * @return Array index of the first element that compares greater than * the given value. */ private function upperBound(ordered:Array, value:Number, first:int=0, last:int=-1):int { if (last < 0) { last = ordered.length; } var count:int = last - first; var index:int; while (count > 0) { var step:int = count >> 1; index = first + step; if (value >= ordered[index]) { first = index + 1; count -= step - 1; } else { count = step; } } return first; } /** * Selects up to a given number of photos approximately evenly spaced along * the route. * @param ordered Array of photos, each of which is an object with * a property &apos;closestTime&apos;. * @param number Number of photos to select. */ private function selectEvenlySpacedPhotos(ordered:Array, number:int):Array { var start:Number = cumulativeVertexDistance[0]; var end:Number = cumulativeVertexDistance[cumulativeVertexDistance.length - 2]; var closestTimes:Array = []; for each (var photo:Object in ordered) { closestTimes.push(photo.closestTime); } var selectedPhotos:Array = []; for (var i:int = 0; i < number; ++i) { var idealTime:Number = start + ((end - start) * (i + 0.5) / number); var index:int = upperBound(closestTimes, idealTime); if (index < 1) { index = 0; } else if (index >= ordered.length) { index = ordered.length - 1; } else { var errorToPrev:Number = Math.abs(idealTime - closestTimes[index - 1]); var errorToNext:Number = Math.abs(idealTime - closestTimes[index]); if (errorToPrev < errorToNext) { --index; } } selectedPhotos.push(ordered[index]); } return selectedPhotos; } /** * Handles completion of loading the Panoramio index data. Selects from the * returned photo indices a subset of those that lie along the route and * initiates load of each of these. * @param event Load completion event. */ private function onPanoramioDataLoaded(event:Event):void { var loader:URLLoader = event.target as URLLoader; var decoder:JSONDecoder = new JSONDecoder(loader.data as String); var allPhotos:Array = decoder.getValue().photos; for each (var photo:Object in allPhotos) { var latLng:LatLng = new LatLng(photo.latitude, photo.longitude); photo.closestTime = getTimeOfClosestApproach(fromLatLngToPoint(latLng, 0)); } allPhotos.sortOn("closestTime", Array.NUMERIC); photos = selectEvenlySpacedPhotos(allPhotos, NUM_SHOWN_PHOTOS); for each (photo in photos) { var photoLoader:Loader = new Loader(); // The images aren&apos;t on panoramio.com: we can&apos;t acquire pixel access // using "new LoaderContext(true)". photoLoader.load( new URLRequest(photo.photo_file_url)); photo.loader = photoLoader; // Save the loader info: we use this to find the original element when // the load completes. photo.loaderInfo = photoLoader.contentLoaderInfo; photoLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, onPhotoLoaded); } } /** * Creates a MouseEvent listener function that will navigate to the given * URL in a new window. * @param url URL to which to navigate. */ private function createOnClickUrlOpener(url:String):Function { return function(event:MouseEvent):void { navigateToURL(new URLRequest(url)); }; } /** * Handles completion of loading an individual Panoramio image. * Adds a custom marker that displays the image. Initially this is made * invisible so that it can be faded in as needed. * @param event Load completion event. */ private function onPhotoLoaded(event:Event):void { var loaderInfo:LoaderInfo = event.target as LoaderInfo; // We need to find which photo element this image corresponds to. for each (var photo:Object in photos) { if (loaderInfo == photo.loaderInfo) { var imageMarker:Sprite = createImageMarker(photo.loader, photo.owner_name, photo.owner_url); var options:MarkerOptions = new MarkerOptions({ icon: imageMarker, hasShadow: true, iconAlignment: MarkerOptions.ALIGN_BOTTOM | MarkerOptions.ALIGN_LEFT }); var latLng:LatLng = new LatLng(photo.latitude, photo.longitude); var marker:Marker = new Marker(latLng, options); photo.marker = marker; addOverlay(marker); // A hack: we add the actual image after the overlay has been added, // which creates the shadow, so that the shadow is valid even if we // don&apos;t have security privileges to generate the shadow from the // image. marker.foreground.visible = false; marker.shadow.alpha = 0; var imageHolder:Sprite = new Sprite(); imageHolder.addChild(photo.loader); imageHolder.buttonMode = true; imageHolder.addEventListener( MouseEvent.CLICK, createOnClickUrlOpener(photo.photo_url)); imageMarker.addChild(imageHolder); return; } } trace("An image was loaded which could not be found in the photo array."); } /** * Creates a custom marker showing an image. */ private function createImageMarker(child:DisplayObject, ownerName:String, ownerUrl:String):Sprite { var content:Sprite = new Sprite(); var panoramioIcon:Bitmap = new PanoramioIcon(); var iconHolder:Sprite = new Sprite(); iconHolder.addChild(panoramioIcon); iconHolder.buttonMode = true; iconHolder.addEventListener(MouseEvent.CLICK, onPanoramioIconClick); panoramioIcon.x = BORDER_L; panoramioIcon.y = BORDER_T; content.addChild(iconHolder); // NOTE: we add the image as a child only after we&apos;ve added the marker // to the map. Currently the API requires this if it&apos;s to generate the // shadow for unprivileged content. // Shrink the image, so that it doesn&apos;t obcure too much screen space. // Ideally, we&apos;d subsample, but we don&apos;t have pixel level access. child.scaleX = IMAGE_SCALE; child.scaleY = IMAGE_SCALE; var imageW:Number = child.width; var imageH:Number = child.height; child.x = BORDER_L + 30; child.y = BORDER_T + iconHolder.height + GAP_T; var authorField:TextField = new TextField(); authorField.autoSize = TextFieldAutoSize.LEFT; authorField.defaultTextFormat = new TextFormat("_sans", 12); authorField.text = "author:"; content.addChild(authorField); authorField.x = BORDER_L; authorField.y = BORDER_T + iconHolder.height + GAP_T + imageH + GAP_B; var ownerField:TextField = new TextField(); ownerField.autoSize = TextFieldAutoSize.LEFT; var textFormat:TextFormat = new TextFormat("_sans", 14, 0x0e5f9a); ownerField.defaultTextFormat = textFormat; ownerField.htmlText = "<a href=\"" + ownerUrl + "\" target=\"_blank\">" + ownerName + "</a>"; content.addChild(ownerField); ownerField.x = BORDER_L + authorField.width; ownerField.y = BORDER_T + iconHolder.height + GAP_T + imageH + GAP_B; var totalW:Number = BORDER_L + Math.max(imageW, ownerField.width + authorField.width) + BORDER_R; var totalH:Number = BORDER_T + iconHolder.height + GAP_T + imageH + GAP_B + ownerField.height + BORDER_B; content.graphics.beginFill(0xffffff); content.graphics.drawRoundRect(0, 0, totalW, totalH, 10, 10); content.graphics.endFill(); var marker:Sprite = new Sprite(); marker.addChild(content); content.x = 30; content.y = 0; marker.graphics.lineStyle(); marker.graphics.beginFill(0xff0000); marker.graphics.drawCircle(0, totalH + 30, 3); marker.graphics.endFill(); marker.graphics.lineStyle(2, 0xffffff); marker.graphics.moveTo(30 + 10, totalH - 10); marker.graphics.lineTo(0, totalH + 30); return marker; } /** * Handles click on the Panoramio icon. */ private function onPanoramioIconClick(event:MouseEvent):void { navigateToURL(new URLRequest(PANORAMIO_HOME)); } /** * Handles failure of a Panoramio image load. */ private function onPanoramioDataFailed(event:IOErrorEvent):void { trace("Load of image failed: " + event); } /** * Returns a string containing cgi query parameters. * @param Associative array mapping query parameter key to value. * @return String containing cgi query parameters. */ private static function paramsToString(params:Object):String { var result:String = ""; var separator:String = ""; for (var key:String in params) { result += separator + encodeURIComponent(key) + "=" + encodeURIComponent(params[key]); separator = "&"; } return result; } /** * Called once the lead-in flight is done. Starts the car driving along * the route and starts a timer to begin fade in of the Panoramio * images in 1.5 seconds. */ private function onLeadInDone(event:Event):void { // Set startTimer non-zero so that the car starts to move. startTimer = getTimer(); // Start a timer that will fade in the Panoramio images. var fadeInTimer:Timer = new Timer(1500, 1); fadeInTimer.addEventListener(TimerEvent.TIMER, onFadeInTimer); fadeInTimer.start(); } /** * Handles the fade in timer&apos;s TIMER event. Sets markerAlpha above zero * which causes the frame enter handler to fade in the markers. */ private function onFadeInTimer(event:Event):void { markerAlpha = 0.01; } /** * The end time of the flight. */ private function get endTime():Number { if (!cumulativeStepDuration || cumulativeStepDuration.length == 0) { return startTimer; } return startTimer + cumulativeStepDuration[cumulativeStepDuration.length - 1]; } /** * Creates the cumulative arrays, cumulativeStepDuration and * cumulativeVertexDistance. */ private function createCumulativeArrays():void { cumulativeStepDuration = new Array(route.numSteps + 1); cumulativeVertexDistance = new Array(polyline.getVertexCount() + 1); var polylineTotal:Number = 0; var total:Number = 0; var numVertices:int = polyline.getVertexCount(); for (var stepIndex:int = 0; stepIndex < route.numSteps; ++stepIndex) { cumulativeStepDuration[stepIndex] = total; total += route.getStep(stepIndex).duration; var startVertex:int = stepIndex >= 0 ? route.getStep(stepIndex).polylineIndex : 0; var endVertex:int = stepIndex < (route.numSteps - 1) ? route.getStep(stepIndex + 1).polylineIndex : numVertices; var duration:Number = route.getStep(stepIndex).duration; var stepVertices:int = endVertex - startVertex; var latLng:LatLng = polyline.getVertex(startVertex); for (var vertex:int = startVertex; vertex < endVertex; ++vertex) { cumulativeVertexDistance[vertex] = polylineTotal; if (vertex < numVertices - 1) { var nextLatLng:LatLng = polyline.getVertex(vertex + 1); polylineTotal += nextLatLng.distanceFrom(latLng); } latLng = nextLatLng; } } cumulativeStepDuration[stepIndex] = total; } /** * Opens the info window above the car icon that details the given * step of the driving directions. * @param stepIndex Index of the current step. */ private function openInfoForStep(stepIndex:int):void { // Sets the content of the info window. var content:String; if (stepIndex >= route.numSteps) { content = "<b>" + route.endGeocode.address + "</b>" + "<br /><br />" + route.summaryHtml; } else { content = "<b>" + stepIndex + ".</b> " + route.getStep(stepIndex).descriptionHtml; } marker.openInfoWindow(new InfoWindowOptions({ contentHTML: content })); } /** * Displays the driving directions step appropriate for the given time. * Opens the info window showing the step instructions each time we * progress to a new step. * @param time Time for which to display the step. */ private function displayStepAt(time:Number):void { var stepIndex:int = upperBound(cumulativeStepDuration, time) - 1; var minStepIndex:int = 0; var maxStepIndex:int = route.numSteps - 1; if (stepIndex >= 0 && stepIndex <= maxStepIndex && currentStepIndex != stepIndex) { openInfoForStep(stepIndex); currentStepIndex = stepIndex; } } /** * Returns the LatLng at which the car should be positioned at the given * time. * @param time Time for which LatLng should be found. * @return LatLng. */ private function latLngAt(time:Number):LatLng { var stepIndex:int = upperBound(cumulativeStepDuration, time) - 1; var minStepIndex:int = 0; var maxStepIndex:int = route.numSteps - 1; if (stepIndex < minStepIndex) { return route.startGeocode.point; } else if (stepIndex > maxStepIndex) { return route.endGeocode.point; } var stepStart:Number = cumulativeStepDuration[stepIndex]; var stepEnd:Number = cumulativeStepDuration[stepIndex + 1]; var stepFraction:Number = (time - stepStart) / (stepEnd - stepStart); var startVertex:int = route.getStep(stepIndex).polylineIndex; var endVertex:int = (stepIndex + 1) < route.numSteps ? route.getStep(stepIndex + 1).polylineIndex : polyline.getVertexCount(); var stepVertices:int = endVertex - startVertex; var stepLeng

    Read the article

  • mod_rewrite settings causes server to throw HTTP 500 errors instead of 404

    - by FractalizeR
    Hello. I have a server with VBulletin forum (working under Apache 2.2, CentOS). The default settings for it in .htaccess are as follows: RewriteEngine on RewriteCond %{HTTP_HOST} ^gsmforum\.ru RewriteRule (.*) http://www.gsmforum.ru/$1 [R=301,L] # If you are having problems or are using VirtualDocumentRoot, uncomment this line and set it to your vBulletin directory. RewriteBase / RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] # Forum RewriteRule ^threads/.* showthread.php [QSA] RewriteRule ^forums/.* forumdisplay.php [QSA] RewriteRule ^members/.* member.php [QSA] RewriteRule ^blogs/.* blog.php [QSA] ReWriteRule ^entries/.* entry.php [QSA] RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] # MVC RewriteRule ^(?:(.*?)(?:/|$))(.*|$)$ $1.php?r=$2 [QSA] If I try to access any non-existent URL on forum like www.example.com/ajdsjaskasajs, server throws HTTP 500 error. Apache log says: [Sun Apr 25 17:24:32 2010] [error] [client 82.211.152.12] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://www.gsmforum.ru/forumdisplay.php?424-%CD%EE%E2%EE%F1%F2%E8-%EF%F0%EE%E3%F0%E0%EC%EC%E0%F2%EE%F0%EE%E2 If I switch LogLevel to Debug I get something like this: [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php.php.php.php.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php.php.php.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php.php.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt.php [Sun Apr 25 17:30:46 2010] [debug] core.c(3059): [client 95.25.70.85] redirected from r->uri = /robots.txt [root@server2 logs]# tail httpd_error.log [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php.php.php.php.php.php.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php.php.php.php.php.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php.php.php.php.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php.php.php.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php.php.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript.php, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru [Sun Apr 25 17:31:27 2010] [debug] core.c(3059): [client 217.118.79.27] redirected from r->uri = /clientscript/vbulletin_css/style-d95b06dc-00001.css, referer: http://74.125.77.132/search?q=cache:bGPJ8XkSvlMJ:www.gsmforum.ru/showthread.php%3Ft%3D62479+%D0%A3%D0%BC%D0%B5%D0%BD%D1%8C%D1%88%D0%B5%D0%BD%D0%B8%D0%B5+%D0%BF%D0%B8%D0%BD%D0%B3%D0%B0+3G+%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC&cd=3&hl=ru&ct=clnk&gl=ru If I remove or comment the last (#MVC) line from .htaccess all is fine. Can you advise me what is the problem with mod_rewrite settings? Why does the last line cause infinite recursion?

    Read the article

  • ASP.NET MVC 3 Hosting :: New Features in ASP.NET MVC 3

    - by mbridge
    Razor View Engine The Razor view engine is a new view engine option for ASP.NET MVC that supports the Razor templating syntax. The Razor syntax is a streamlined approach to HTML templating designed with the goal of being a code driven minimalist templating approach that builds on existing C#, VB.NET and HTML knowledge. The result of this approach is that Razor views are very lean and do not contain unnecessary constructs that get in the way of you and your code. ASP.NET MVC 3 Preview 1 only supports C# Razor views which use the .cshtml file extension. VB.NET support will be enabled in later releases of ASP.NET MVC 3. For more information and examples, see Introducing “Razor” – a new view engine for ASP.NET on Scott Guthrie’s blog. Dynamic View and ViewModel Properties A new dynamic View property is available in views, which provides access to the ViewData object using a simpler syntax. For example, imagine two items are added to the ViewData dictionary in the Index controller action using code like the following: public ActionResult Index() {          ViewData["Title"] = "The Title";          ViewData["Message"] = "Hello World!"; } Those properties can be accessed in the Index view using code like this: <h2>View.Title</h2> <p>View.Message</p> There is also a new dynamic ViewModel property in the Controller class that lets you add items to the ViewData dictionary using a simpler syntax. Using the previous controller example, the two values added to the ViewData dictionary can be rewritten using the following code: public ActionResult Index() {     ViewModel.Title = "The Title";     ViewModel.Message = "Hello World!"; } “Add View” Dialog Box Supports Multiple View Engines The Add View dialog box in Visual Studio includes extensibility hooks that allow it to support multiple view engines, as shown in the following figure: Service Location and Dependency Injection Support ASP.NET MVC 3 introduces improved support for applying Dependency Injection (DI) via Inversion of Control (IoC) containers. ASP.NET MVC 3 Preview 1 provides the following hooks for locating services and injecting dependencies: - Creating controller factories. - Creating controllers and setting dependencies. - Setting dependencies on view pages for both the Web Form view engine and the Razor view engine (for types that derive from ViewPage, ViewUserControl, ViewMasterPage, WebViewPage). - Setting dependencies on action filters. Using a Dependency Injection container is not required in order for ASP.NET MVC 3 to function properly. Global Filters ASP.NET MVC 3 allows you to register filters that apply globally to all controller action methods. Adding a filter to the global filters collection ensures that the filter runs for all controller requests. To register an action filter globally, you can make the following call in the Application_Start method in the Global.asax file: GlobalFilters.Filters.Add(new MyActionFilter()); The source of global action filters is abstracted by the new IFilterProvider interface, which can be registered manually or by using Dependency Injection. This allows you to provide your own source of action filters and choose at run time whether to apply a filter to an action in a particular request. New JsonValueProviderFactory Class The new JsonValueProviderFactory class allows action methods to receive JSON-encoded data and model-bind it to an action-method parameter. This is useful in scenarios such as client templating. Client templates enable you to format and display a single data item or set of data items by using a fragment of HTML. ASP.NET MVC 3 lets you connect client templates easily with an action method that both returns and receives JSON data. Support for .NET Framework 4 Validation Attributes and IvalidatableObject The ValidationAttribute class was improved in the .NET Framework 4 to enable richer support for validation. When you write a custom validation attribute, you can use a new IsValid overload that provides a ValidationContext instance. This instance provides information about the current validation context, such as what object is being validated. This change enables scenarios such as validating the current value based on another property of the model. The following example shows a sample custom attribute that ensures that the value of PropertyOne is always larger than the value of PropertyTwo: public class CompareValidationAttribute : ValidationAttribute {     protected override ValidationResult IsValid(object value,              ValidationContext validationContext) {         var model = validationContext.ObjectInstance as SomeModel;         if (model.PropertyOne > model.PropertyTwo) {            return ValidationResult.Success;         }         return new ValidationResult("PropertyOne must be larger than PropertyTwo");     } } Validation in ASP.NET MVC also supports the .NET Framework 4 IValidatableObject interface. This interface allows your model to perform model-level validation, as in the following example: public class SomeModel : IValidatableObject {     public int PropertyOne { get; set; }     public int PropertyTwo { get; set; }     public IEnumerable<ValidationResult> Validate(ValidationContext validationContext) {         if (PropertyOne <= PropertyTwo) {            yield return new ValidationResult(                "PropertyOne must be larger than PropertyTwo");         }     } } New IClientValidatable Interface The new IClientValidatable interface allows the validation framework to discover at run time whether a validator has support for client validation. This interface is designed to be independent of the underlying implementation; therefore, where you implement the interface depends on the validation framework in use. For example, for the default data annotations-based validator, the interface would be applied on the validation attribute. Support for .NET Framework 4 Metadata Attributes ASP.NET MVC 3 now supports .NET Framework 4 metadata attributes such as DisplayAttribute. New IMetadataAware Interface The new IMetadataAware interface allows you to write attributes that simplify how you can contribute to the ModelMetadata creation process. Before this interface was available, you needed to write a custom metadata provider in order to have an attribute provide extra metadata. This interface is consumed by the AssociatedMetadataProvider class, so support for the IMetadataAware interface is automatically inherited by all classes that derive from that class (notably, the DataAnnotationsModelMetadataProvider class). New Action Result Types In ASP.NET MVC 3, the Controller class includes two new action result types and corresponding helper methods. HttpNotFoundResult Action The new HttpNotFoundResult action result is used to indicate that a resource requested by the current URL was not found. The status code is 404. This class derives from HttpStatusCodeResult. The Controller class includes an HttpNotFound method that returns an instance of this action result type, as shown in the following example: public ActionResult List(int id) {     if (id < 0) {                 return HttpNotFound();     }     return View(); } HttpStatusCodeResult Action The new HttpStatusCodeResult action result is used to set the response status code and description. Permanent Redirect The HttpRedirectResult class has a new Boolean Permanent property that is used to indicate whether a permanent redirect should occur. A permanent redirect uses the HTTP 301 status code. Corresponding to this change, the Controller class now has several methods for performing permanent redirects: - RedirectPermanent - RedirectToRoutePermanent - RedirectToActionPermanent These methods return an instance of HttpRedirectResult with the Permanent property set to true. Breaking Changes The order of execution for exception filters has changed for exception filters that have the same Order value. In ASP.NET MVC 2 and earlier, exception filters on the controller with the same Order as those on an action method were executed before the exception filters on the action method. This would typically be the case when exception filters were applied without a specified order Order value. In MVC 3, this order has been reversed in order to allow the most specific exception handler to execute first. As in earlier versions, if the Order property is explicitly specified, the filters are run in the specified order. Known Issues When you are editing a Razor view (CSHTML file), the Go To Controller menu item in Visual Studio will not be available, and there are no code snippets.

    Read the article

  • Upgrading from TFS 2010 RC to TFS 2010 RTM done

    - by Martin Hinshelwood
    Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010  – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes.   We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system.   Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010.  Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010  and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS)   It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release.   Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers.  Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later.   You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery.   Figure: Now we have everything setup the configuration wizard can do its work.  Figure: Took a while on the “Web site” stage for some point, but zipped though after that.  Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace:    at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString)    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info   @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace:    at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url)    at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft.   Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall  the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010.   Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic.   Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well.   Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

    Read the article

  • CodePlex Daily Summary for Saturday, March 06, 2010

    CodePlex Daily Summary for Saturday, March 06, 2010New ProjectsAgr.CQRS: Agr.CQRS is a C# framework for DDD applications that use the Command Query Responsibility Segregation pattern (CQRS) and Event Sourcing. BigDays 2010: Big>Days 2010BizTalk - Controlled Admin: Hi .NET folks, I am planning to start project on a Controlled BizTalk Admin tool. This tool will be useful for the organizations which have "Sh...Blacklist of Providers: Blacklist of Providers - the application for department of warehouse logistics (warehouse) at firms.Career Vector: A job board software.Chargify Demo: This is a sample website for ChargifyConceptual: Concept description and animationEric Hexter: My publicly available source code and examplesFluentNHibernate.Search: A Fluent NHibernate.Search mapping interface for NHibernate provider implementation of Lucene.NET.FreelancePlanner: FreelancePlanner is a project tracking tool for freelance translators.HTMLx - JavaScript on the Server for .NET: HTMLx is a set of libraries based on ASP.NET engine to provide JavaScript programmability on the server side. It allows Web developers to use JavaS...IronMSBuild: IronMSBuild is a custom MSBuild Task, which allows you to execute IronRuby scripts. // have to provide some examples LINQ To Blippr: LINQ to Blippr is an open source LINQ Provider for the micro-reviewing service Blippr. LINQ to Blippr makes it easier and more efficent for develo...Luk@sh's HTML Parser: library that simplifies parsing of the HTML documents, for .NETMeta Choons: Unsure as yet but will be a kind of discogs type site but different..NetWork2: NetWork2Regular Expression Chooser: Simple gui for choosing the regular expressions that have become more than simple.See.Sharper: Hopefully useful C# extensions.SharePoint 2010 Toggle User Interface: Toggle the SharePoint 2010 user interface between the new SharePoint 2010 user interface and SharePoint 2007 user interface.Silverlight DiscussionBoard for SharePoint: This is a sharepoint 3.0 webpart that uses a silverlight treeview to display metadata about sharepoint discussions anduses the html bridge to show...Simple Sales Tracking CRM API Wrapper: The Simple Sales Tracking API Wrapper, enables easy extention development and integration with the hosted service at http://www.simplesalestracking...Syntax4Word: A syntax addin for word 2007.TortoiseHg installer builder: TortoiseHg and Mercurial installer builder for Windowsunbinder: Model un binding for route value dictionariesWindows Workflow Foundation on Codeplex: This site has previews of Workflow features which are released out of band for the purposes of adoption and feedback.XNA RSM Render State Manager: Render state management idea for XNA games. Enables isolation between draw calls whilst reducing DX9 SetRenderState calls to the minimum.New ReleasesAgr.CQRS: Sourcecode package: Agr.CQRS is a C# framework for DDD applications that use the Command Query Responsibility Segregation pattern (CQRS) and Event Sourcing. This dow...Book Cataloger: Preview 0.1.6a: New Features: Export to Word 2007 Bibliography format Dictionary list editors for Binding, Condition Improvements: Stability improved Content ...Braintree Client Library: Braintree-1.1.2: Includes minor enhancements to CreditCard and ValidationErrors to support upcoming example application.CassiniDev - Cassini 3.5 Developers Edition: CassiniDev v3.5.0.5: For usage see Readme.htm in download. New in CassiniDev v3.5.0.5 Reintroduced the Lib project and signed all Implemented the CassiniSqlFixture -...Composure: Calcium-64420-VS2010rc1.NET4.SL3: This is a simple conversion of Calcium (rev 64420) built in VS2010 RC1 against .NET4 and Silverlight 3. No source files were changed and ALL test...Composure: MS AJAX Library (46266) for VS2010 RC1 .NET4: This is a quick port of Microsoft's AJAX Library (rev 46266) for Visual Studio 2010 RC1 built against .NET 4.0. Since this conversion was thrown t...Composure: MS Web Test Lightweight for VS2010 RC1 .NET4: A simple conversion of Microsoft's Web Test Lightweight for Visual Studio 2010 RC1 .NET 4.0. This is part of a larger "special request" conversion...CoNatural Components: CoNatural Components 1.5: Supporting new data types: Added support for binary data types -> binary, varbinary, etc maps to byte[] Now supporting SQL Server 2008 new types ...Extensia: Extensia 2010-03-05: Extensia is a very large list of extension methods and a few helper types. Some extension methods are not practical (e.g. slow) whilst others are....Fluent Assertions: Fluent Assertions release 1.1: In this release, we've worked hard to add some important missing features that we really needed, and also improve resiliance against illegal argume...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.0 RC: Fluent Ribbon Control Suite 1.0 (Release Candidate)Includes: Fluent.dll (with .pdb and .xml, debug and release version) Showcase Application Sa...FluentNHibernate.Search: 0.1 Beta: First beta versionFolderSize: FolderSize.Win32.1.0.7.0: FolderSize.Win32.1.0.6.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...Free Silverlight & WPF Chart Control - Visifire: Silverlight and WPF Step Line Chart: Hi, With this release Visifire introduces Step Line Chart. This release also contains fix for the following issues: * In WPF, if AnimatedUpd...Html to OpenXml: HtmlToOpenXml 1.0: The dll library to include in your project. The dll is signed for GAC support. Compiled with .Net 3.5, Dependencies on System.Drawing.dll and Docu...Line Counter: 1.5.1: The Line Counter is a tool to calculate lines of your code files. The tool was written in .NET 2.0. Line Counter 1.5.1 Added outline icons and lin...Lokad Cloud - .NET O/C mapper (object to cloud) for Windows Azure: Lokad.Cloud v1.0.662.1: You can get the most recent release directly from the build server at http://build.lokad.com/distrib/Lokad.Cloud/Lost in Translation: LostInTranslation v0.2: Alpha release: function complete but not UX complete.MDownloader: MDownloader-0.15.7.56349: Supported large file resumption. Fixed minor bugs.Mini C# Lab: Mini CSharp Lab Ver 1.4: The primary new feature of Ver 1.4 is batch mode! Now you can run Mini C# Lab program as a scheduled task, no UI interactivity is needed. Here ar...Mobile Store: First drop: First droppatterns & practices SharePoint Guidance: SPG2010 Drop6: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...Picasa Downloader: PicasaDownloader (41446): Changelog: Replaced some exception messages by a Summary dialog shown after downloading if there have been problems. Corrected the Portable vers...Pod Thrower: Version 1: This is the first release, I'm sure there are bugs, the tool is fully functional and I'm using it currently.PowerShell Provider BizTalk: BizTalkFactory PowerShell Provider - 1.1-snapshot: This release constitutes the latest development snapshot for the Provider. Please, leave feedback and use the Issue Tracker to help improve this pr...Resharper Settings Manager: RSM 1.2.1: This is a bug fix release. Changes Fixed plug-in crash when shared settings file was modified externally.Reusable Library Demo: Reusable Library Demo v1.0.2: A demonstration of reusable abstractions for enterprise application developerSharePoint 2010 Toggle User Interface: SharePoint Toggle User Interface: Release 1.0.0.0Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity(net3.5 MySQL) 1.0 Beta: MySQL VS 2008 EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowserTortoiseHg: TortoiseHg 1.0: http://bitbucket.org/tortoisehg/stable/wiki/ReleaseNotes Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before in...Visual Studio 2010 and Team Foundation Server 2010 VM Factory: Rangers Virtualization Guidance: Rangers Virtualization Guidance Focused guidance on creating a Rangers base image manually and introduction of PowerShell scripts to automate many ...Visual Studio DSite: Advanced Email Program (Visual Basic 2008): This email program can send email to any one using your email username and email credentials. The email program can also attatch attactments to you...WPF ShaderEffect Generator: WPF ShaderEffect Generator 1.6: Several improvements and bug fixes have gone into the comment parsing code for the registers. The plug-in should now correctly pay attention to th...WSDLGenerator: WSDLGenerator 0.0.0.3: - Fixed SharePoint generated *.wsdl.aspx file - Added commandline option -wsdl which does only generate the wsdl file.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMicrosoft SQL Server Community & SamplesMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFluent AssertionsComposureDiffPlex - a .NET Diff Generator

    Read the article

  • ASP.NET MVC Paging/Sorting/Filtering a list using ModelMetadata

    - by rajbk
    This post looks at how to control paging, sorting and filtering when displaying a list of data by specifying attributes in your Model using the ASP.NET MVC framework and the excellent MVCContrib library. It also shows how to hide/show columns and control the formatting of data using attributes.  This uses the Northwind database. A sample project is attached at the end of this post. Let’s start by looking at a class called ProductViewModel. The properties in the class are decorated with attributes. The OrderBy attribute tells the system that the Model can be sorted using that property. The SearchFilter attribute tells the system that filtering is allowed on that property. Filtering type is set by the  FilterType enum which currently supports Equals and Contains. The ScaffoldColumn property specifies if a column is hidden or not The DisplayFormat specifies how the data is formatted. public class ProductViewModel { [OrderBy(IsDefault = true)] [ScaffoldColumn(false)] public int? ProductID { get; set; }   [SearchFilter(FilterType.Contains)] [OrderBy] [DisplayName("Product Name")] public string ProductName { get; set; }   [OrderBy] [DisplayName("Unit Price")] [DisplayFormat(DataFormatString = "{0:c}")] public System.Nullable<decimal> UnitPrice { get; set; }   [DisplayName("Category Name")] public string CategoryName { get; set; }   [SearchFilter] [ScaffoldColumn(false)] public int? CategoryID { get; set; }   [SearchFilter] [ScaffoldColumn(false)] public int? SupplierID { get; set; }   [OrderBy] public bool Discontinued { get; set; } } Before we explore the code further, lets look at the UI.  The UI has a section for filtering the data. The column headers with links are sortable. Paging is also supported with the help of a pager row. The pager is rendered using the MVCContrib Pager component. The data is displayed using a customized version of the MVCContrib Grid component. The customization was done in order for the Grid to be aware of the attributes mentioned above. Now, let’s look at what happens when we perform actions on this page. The diagram below shows the process: The form on the page has its method set to “GET” therefore we see all the parameters in the query string. The query string is shown in blue above. This query gets routed to an action called Index with parameters of type ProductViewModel and PageSortOptions. The parameters in the query string get mapped to the input parameters using model binding. The ProductView object created has the information needed to filter data while the PageAndSorting object is used for paging and sorting the data. The last block in the figure above shows how the filtered and paged list is created. We receive a product list from our product repository (which is of type IQueryable) and first filter it by calliing the AsFiltered extension method passing in the productFilters object and then call the AsPagination extension method passing in the pageSort object. The AsFiltered extension method looks at the type of the filter instance passed in. It skips properties in the instance that do not have the SearchFilter attribute. For properties that have the SearchFilter attribute, it adds filter expression trees to filter against the IQueryable data. The AsPagination extension method looks at the type of the IQueryable and ensures that the column being sorted on has the OrderBy attribute. If it does not find one, it looks for the default sort field [OrderBy(IsDefault = true)]. It is required that at least one attribute in your model has the [OrderBy(IsDefault = true)]. This because a person could be performing paging without specifying an order by column. As you may recall the LINQ Skip method now requires that you call an OrderBy method before it. Therefore we need a default order by column to perform paging. The extension method adds a order expressoin tree to the IQueryable and calls the MVCContrib AsPagination extension method to page the data. Implementation Notes Auto Postback The search filter region auto performs a get request anytime the dropdown selection is changed. This is implemented using the following jQuery snippet $(document).ready(function () { $("#productSearch").change(function () { this.submit(); }); }); Strongly Typed View The code used in the Action method is shown below: public ActionResult Index(ProductViewModel productFilters, PageSortOptions pageSortOptions) { var productPagedList = productRepository.GetProductsProjected().AsFiltered(productFilters).AsPagination(pageSortOptions);   var productViewFilterContainer = new ProductViewFilterContainer(); productViewFilterContainer.Fill(productFilters.CategoryID, productFilters.SupplierID, productFilters.ProductName);   var gridSortOptions = new GridSortOptions { Column = pageSortOptions.Column, Direction = pageSortOptions.Direction };   var productListContainer = new ProductListContainerModel { ProductPagedList = productPagedList, ProductViewFilterContainer = productViewFilterContainer, GridSortOptions = gridSortOptions };   return View(productListContainer); } As you see above, the object that is returned to the view is of type ProductListContainerModel. This contains all the information need for the view to render the Search filter section (including dropdowns),  the Html.Pager (MVCContrib) and the Html.Grid (from MVCContrib). It also stores the state of the search filters so that they can recreate themselves when the page reloads (Viewstate, I miss you! :0)  The class diagram for the container class is shown below.   Custom MVCContrib Grid The MVCContrib grid default behavior was overridden so that it would auto generate the columns and format the columns based on the metadata and also make it aware of our custom attributes (see MetaDataGridModel in the sample code). The Grid ensures that the ShowForDisplay on the column is set to true This can also be set by the ScaffoldColumn attribute ref: http://bradwilson.typepad.com/blog/2009/10/aspnet-mvc-2-templates-part-2-modelmetadata.html) Column headers are set using the DisplayName attribute Column sorting is set using the OrderBy attribute. The data is formatted using the DisplayFormat attribute. Generic Extension methods for Sorting and Filtering The extension method AsFiltered takes in an IQueryable<T> and uses expression trees to query against the IQueryable data. The query is constructed using the Model metadata and the properties of the T filter (productFilters in our case). Properties in the Model that do not have the SearchFilter attribute are skipped when creating the filter expression tree.  It returns an IQueryable<T>. The extension method AsPagination takes in an IQuerable<T> and first ensures that the column being sorted on has the OrderBy attribute. If not, we look for the default OrderBy column ([OrderBy(IsDefault = true)]). We then build an expression tree to sort on this column. We finally hand off the call to the MVCContrib AsPagination which returns an IPagination<T>. This type as you can see in the class diagram above is passed to the view and used by the MVCContrib Grid and Pager components. Custom Provider To get the system to recognize our custom attributes, we create our MetadataProvider as mentioned in this article (http://bradwilson.typepad.com/blog/2010/01/why-you-dont-need-modelmetadataattributes.html) protected override ModelMetadata CreateMetadata(IEnumerable<Attribute> attributes, Type containerType, Func<object> modelAccessor, Type modelType, string propertyName) { ModelMetadata metadata = base.CreateMetadata(attributes, containerType, modelAccessor, modelType, propertyName);   SearchFilterAttribute searchFilterAttribute = attributes.OfType<SearchFilterAttribute>().FirstOrDefault(); if (searchFilterAttribute != null) { metadata.AdditionalValues.Add(Globals.SearchFilterAttributeKey, searchFilterAttribute); }   OrderByAttribute orderByAttribute = attributes.OfType<OrderByAttribute>().FirstOrDefault(); if (orderByAttribute != null) { metadata.AdditionalValues.Add(Globals.OrderByAttributeKey, orderByAttribute); }   return metadata; } We register our MetadataProvider in Global.asax.cs. protected void Application_Start() { AreaRegistration.RegisterAllAreas();   RegisterRoutes(RouteTable.Routes);   ModelMetadataProviders.Current = new MvcFlan.QueryModelMetaDataProvider(); } Bugs, Comments and Suggestions are welcome! You can download the sample code below. This code is purely experimental. Use at your own risk. Download Sample Code (VS 2010 RTM) MVCNorthwindSales.zip

    Read the article

  • ActiveX component can't create Object Error? Check 64 bit Status

    - by Rick Strahl
    If you're running on IIS 7 and a 64 bit operating system you might run into the following error using ASP classic or ASP.NET with COM interop. In classic ASP applications the error will show up as: ActiveX component can't create object   (Error 429) (actually without error handling the error just shows up as 500 error page) In my case the code that's been giving me problems has been a FoxPro COM object I'd been using to serve banner ads to some of my pages. The code basically looks up banners from a database table and displays them at random. The ASP classic code that uses it looks like this: <% Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> Originally this code had no specific error checking as above so the ASP pages just failed with 500 error pages from the Web server. To find out what the problem is this code is more useful at least for debugging: <% ON ERROR RESUME NEXT Set banner = Server.CreateObject("wwBanner.aspBanner") Response.Write(err.Number & " - " & err.Description) banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> which results in: 429 - ActiveX component can't create object which at least gives you a slight clue. In ASP.NET invoking the same COM object with code like this: <% dynamic banner = wwUtils.CreateComInstance("wwBanner.aspBanner") as dynamic; banner.cBANNERFILE = "wwsitebanners"; Response.Write(banner.getBanner(-1)); %> results in: Retrieving the COM class factory for component with CLSID {B5DCBB81-D5F5-11D2-B85E-00600889F23B} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). The class is in fact registered though and the COM server loads fine from a command prompt or other COM client. This error can be caused by a COM server that doesn't load. It looks like a COM registration error. There are a number of traditional reasons why this error can crop up of course. The server isn't registered (run regserver32 to register a DLL server or /regserver on an EXE server) Access permissions aren't set on the COM server (Web account has to be able to read the DLL ie. Network service) The COM server fails to load during initialization ie. failing during startup One thing I always do to check for COM errors fire up the server in a COM client outside of IIS and ensure that it works there first - it's almost always easier to debug a server outside of the Web environment. In my case I tried the server in Visual FoxPro on the server with: loBanners = CREATEOBJECT("wwBanner.aspBanner") loBanners.cBannerFile = "wwsitebanners" ? loBanners.GetBanner(-1) and it worked just fine. If you don't have a full dev environment on the server you can also use VBScript do the same thing and run the .vbs file from the command prompt: Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" MsgBox(banner.getBanner(-1)) Since this both works it tells me the server is registered and working properly. This leaves startup failures or permissions as the problem. I double checked permissions for the Application Pool and the permissions of the folder where the DLL lives and both are properly set to allow access by the Application Pool impersonated user. Just to be sure I assigned an Admin user to the Application Pool but still no go. So now what? 64 bit Servers Ahoy A couple of weeks back I had set up a few of my Application pools to 64 bit mode. My server is Server 2008 64 bit and by default Application Pools run 64 bit. Originally when I installed the server I set up most of my Application Pools to 32 bit mainly for backwards compatibility. But as more of my code migrates to 64 bit OS's I figured it'd be a good idea to see how well code runs under 64 bit code. The transition has been mostly painless. Until today when I noticed the problem with the code above when scrolling to my IIS logs and noticing a lot of 500 errors on many of my ASP classic pages. The code in question in most of these pages deals with this single simple COM object. It took a while to figure out that the problem is caused by the Application Pool running in 64 bit mode. The issue is that 32 bit COM objects (ie. my old Visual FoxPro COM component) cannot be loaded in a 64 bit Application Pool. The ASP pages using this COM component broke on the day I switched my main Application Pool into 64 bit mode but I didn't find the problem until I searched my logs for errors by pure chance. To fix this is easy enough once you know what the problem is by switching the Application Pool to Enable 32-bit Applications: Once this is done the COM objects started working correctly again. 64 bit ASP and ASP.NET with DCOM Servers This is kind of off topic, but incidentally it's possible to load 32 bit DCOM (out of process) servers from ASP.NET and ASP classic even if those applications run in 64 bit application pools. In fact, in West Wind Web Connection I use this capability to run a 64 bit ASP.NET handler that talks to a 32 bit FoxPro COM server which allows West Wind Web Connection to run in native 64 bit mode without custom configuration (which is actually quite useful). It's probably not a common usage scenario but it's good to know that you can actually access 32 bit COM objects this way from ASP.NET. For West Wind Web Connection this works out well as the DCOM interface only makes one non-chatty call to the backend server that handles all the rest of the request processing. Application Pool Isolation is your Friend For me the recent incident of failure in the classic ASP pages has just been another reminder to be very careful with moving applications to 64 bit operation. There are many little traps when switching to 64 bit that are very difficult to track and test for. I described one issue I had a couple of months ago where one of the default ASP.NET filters was loading the wrong version (32bit instead of 64bit) which was extremely difficult to track down and was caused by a very sneaky configuration switch error (basically 3 different entries for the same ISAPI filter all with different bitness settings). It took me almost a full day to track this down). Recently I've been taken to isolate individual applications into separate Application Pools rather than my past practice of combining many apps into shared AppPools. This is a good practice assuming you have enough memory to make this work. Application Pool isolate provides more modularity and allows me to selectively move applications to 64 bit. The error above came about precisely because I moved one of my most populous app pools to 64 bit and forgot about the minimal COM object use in some of my old pages. It's easy to forget. To 64bit or Not Is it worth it to move to 64 bit? Currently I'd say -not really. In my - admittedly limited - testing I don't see any significant performance increases. In fact 64 bit apps just seem to consume considerably more memory (30-50% more in my pools on average) and performance is minimally improved (less than 5% at the very best) in the load testing I've performed on a couple of sites in both modes. The only real incentive for 64 bit would be applications that require huge data spaces that exceed the 32 bit 4 gigabyte memory limit. However I have a hard time imagining an application that needs 4 gigs of memory in a single Application Pool :-). Curious to hear other opinions on benefits of 64 bit operation. © Rick Strahl, West Wind Technologies, 2005-2011Posted in COM   ASP.NET  FoxPro  

    Read the article

  • Troubleshooting Windows Authentication problems (no challenge) in IIS 7.5?

    - by Aaronaught
    I know that there are thousands of reports of people having trouble getting Integrated Windows Authentication to work with IIS, but they all seem to lead to web pages that don't apply or solutions that I've already tried. I've deployed dozens of sites like this before, so either there's something bizarre going on with the server/configuration, or I've been looking at this too long and not seeing the obvious. Simply put, everything works perfectly on my local machine, but falls apart on the production server, which as far as I can tell has the exact same configuration. On the local machine: The machine is running Windows 7 Ultimate, Service Pack 1, IIS 7.5. The site has been tested successfully, using both IIS and the VS Web Development Server. The IIS site config has all authentication methods disabled except Windows Authentication. The local machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. All browsers tested (IE, Firefox, Chrome) show the challenge prompt and allow me to log in to the localhost domain with my (local) Windows account. All browsers tested also work using an opaque local IP address - so the browsers themselves don't seem to care whether the site appears "local" or "remote". I've added a display line to the web page which shows the currently-logged-in user and it shows exactly what I would expect (whichever local user I logged in with). On the remote machine: The server is running Windows Server 2008 R2, IIS 7.5. Loading the web page results in an immediate 401.2 error: You are not authorized to view this page due to invalid authentication headers. No challenge prompt ever appears. The IIS site config has all authentication methods disabled except Windows Authentication. The remote machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. On the remote machine (remote desktop session), the same error appears in Internet Explorer regardless of whether the domain is localhost or the external IP address. If I try to view the remote web site from my local machine, the error is still 401, but a slightly different 401. No subcode, with the text: Access is denied due to invalid credentials. The Windows Authentication IIS role feature is installed. The WindowsAuthentication Module is added (at the Server level). The exact same error occurs if I turn off Windows Authentication and enable Basic Authentication. The site does load if I turn off Windows Authentication and enable Anonymous (obviously). I've already followed all of the troubleshooting steps on Microsoft Support: Troubleshooting HTTP 401 errors in IIS I've already tried the workaround shown on another Microsoft support page (supposedly to force NTLM as the only method). Last but not least, I tried turning on FREB for 401.2 errors and the results don't seem to tell me anything useful, all I see is the following warning: MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ...this seems to just be telling me what I already know (that it's simply rejecting the request instead of negotiating the credentials). The trace does indicate that the WindowsAuthentication module is correctly loaded because there is a NOTIFY_MODULE_START line with ModuleName = WindowsAuthentication (and various other ASP.NET follow-up events - [un]fortunately, no interesting errors or warnings here). Can anyone tell me what I might be missing here? Quick Update: I'm a little uncomfortable sending a whole Wireshark dump as it would reveal IPs, URLs and other stuff, but I did a side-by-side comparison of the HTTP responses from localhost and the remote server in Fiddler, and it seems fairly self-evident what the problem is: Localhost: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:42:34 GMT Content-Length: 6399 Proxy-Support: Session-Based-Authentication Remote: HTTP/1.1 401 Unauthorized Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:43:13 GMT Content-Length: 1293 Aside from a few seemingly-inconsequential differences like cache-control, the main difference is that the remote server is not sending the WWW-Authenticate headers back to the client. So, I guess that narrows the question down to: Why is IIS not sending WWW-Authenticate headers when Windows Authentication appears to be installed, loaded, and exclusively enabled?

    Read the article

  • WinInet Apps failing when Internet Explorer is set to Offline Mode

    - by Rick Strahl
    Ran into a nasty issue last week when all of a sudden many of my old applications that are using WinInet for HTTP access started failing. Specifically, the WinInet HttpSendRequest() call started failing with an error of 2, which when retrieving the error boils down to: WinInet Error 2: The system cannot find the file specified Now this error can pop up in many legitimate scenarios with WinInet such as when no Internet connection is available or the HTTP configuration (usually configured in Internet Explorer’s options) is misconfigured. The error typically means that the server in question cannot be found or more specifically an Internet connection can’t be established. In this case the problem started suddenly and was causing some of my own applications (old Visual FoxPro apps using my own wwHttp library) and all Adobe Air applications (which apparently uses WinInet for its basic HTTP stack) along with a few more oddball applications to fail instantly when trying to connect via HTTP. Most other applications – all of my installed browsers, email clients, various social network updaters all worked just fine. It seems it was only WinInet apps that were failing. Yet oddly Internet Explorer appeared to be working. So the problem seemed to be isolated to those ‘classic’ applications using WinInet. WinInet’s base configuration uses the Internet Explorer options dialog. To check this out I typically go to the Internet Explorer options and find the Connection tab, and check out the LAN Setup. Make sure there are no rogue proxy settings or configuration scripts that are invalid. Trying with Auto-configuration on and off also can often fix ‘real’ configuration errors. This time however this wasn’t a problem – nothing in the LAN configuration was set (all default). I also played with the Automatic detection of settings which also had no effect. I also tried to use Fiddler to see if that would tell me something. Fiddler has a few additional WinInet configuration options in its configuration. Running Fiddler and hitting an HTTP request using WinInet would never actually hit Fiddler – the failure would occur before WinInet ever fired up the HTTP connection to go through the Fiddler HTTP proxy. And the Culprit is: Internet Explorer’s Work Offline Option The culprit in this situation was Internet Explorer which at some point, unknown to me switched into Offline Mode and was then shut down: When this Offline mode is checked when IE is running *or* if IE gets shut down with this flag set, all applications using WinInet by default assume that it’s running in offline mode. Depending on your caching HTTP headers and whether the page was cached previously you may or may not get a response or an error. For an independent non-browser application this will be highly unpredictable and likely result in failures getting online – especially if the application forces requests to always reload by disabling HTTP caching (as I do on most of my dynamic HTTP clients). What makes this especially tricky is that even when IE is in offline mode in the browser, you can still browse around the Web *if* you have a connection. IE will try to load anything it has cached from the local cache, but as soon as you hit a URL that isn’t cached it will automatically try to access that URL and uncheck the Work Offline option. Conversely if you get knocked off the Internet and browse in IE 9, IE will automatically go into offline mode. I never explicitly set offline mode – it just automatically sets itself on and off depending on the connection. Problem is if you’re not using IE all the time (as I do – rarely and just for testing so usually a few commonly used URLs) and you left it in offline mode when you exit, offline mode stays set which results in the above head scratcher. Ack. This isn’t new behavior in IE 9 BTW – this behavior has always been there, but I think what’s different is that IE now automatically switches between online and offline modes without notifying you at all, so it’s hard to tell when you are offline. Fixing the Issue in your Code If you have an application that is using WinInet, there’s a WinInet option called INTERNET_OPTION_IGNORE_OFFLINE. I just checked this out in my own applications and Internet Explorer 9 and it works, but apparently it’s been broken for some older releases (I can’t confirm how far back though) – lots of posts seem to suggest the flag doesn’t work. However, in IE 9 at least it does seem to work if you call InternetSetOption before you call HttpOpenRequest with the Http Session handle. In FoxPro code I use: DECLARE INTEGER InternetSetOption ;    IN WININET.DLL ;    INTEGER HINTERNET,;    INTEGER dwFlags,;    INTEGER @dwValue,;    INTEGER cbSize lnOptionValue = 1   && BOOL TRUE pass by reference   *** Set needed SSL flags lnResult=InternetSetOption(this.hHttpSession,;    INTERNET_OPTION_IGNORE_OFFLINE ,;  && 77    @lnOptionValue ,4)   DECLARE INTEGER HttpOpenRequest ;    IN WININET.DLL ;    INTEGER hHTTPHandle,;    STRING lpzReqMethod,;    STRING lpzPage,;    STRING lpzVersion,;    STRING lpzReferer,;    STRING lpzAcceptTypes,;    INTEGER dwFlags,;    INTEGER dwContextw     hHTTPResult=HttpOpenRequest(THIS.hHttpsession,;    lcVerb,;    tcPage,;    NULL,NULL,NULL,;    INTERNET_FLAG_RELOAD + ;    IIF(THIS.lsecurelink,INTERNET_FLAG_SECURE,0) + ;    this.nHTTPServiceFlags,0) …  And this fixes the issue at least for IE 9… In my FoxPro wwHttp class I now call this by default to never get bitten by this again… This solves the problem permanently for my HTTP client. I never want to see offline operation in an HTTP client API – it’s just too unpredictable in handling errors and the last thing you want is getting unpredictably stale data. Problem solved but this behavior is – well ugly. But then that’s to be expected from an API that’s based on Internet Explorer, eh?© Rick Strahl, West Wind Technologies, 2005-2011Posted in HTTP  Windows  

    Read the article

  • CodePlex Daily Summary for Wednesday, February 24, 2010

    CodePlex Daily Summary for Wednesday, February 24, 2010New ProjectsADO.Net DataSets to ExtJs.data.Store: A JavaScript (and C#) based project to reduce the amount of client-side code necessary to consume ADO.Net / ASP.Net web services when using ExtJS.AMP.Net Wrapper: AMP is a platform to build on-line marketplaces (http://www.poweredbyamp.com). AMP.Net provided Object-Like interaction with AMP's restful service...ArkSwitch: ArkSwitch is an easy to use, finger-friendly task manager for Windows Mobile 6.5.3 (with a WM6.5 compatibility mode). It is developed mainly in C#,...Biffen: Cinema-booking project in Computer Science at University College Nordjylland, Denmark.Braintree Client Library: Client library for integrating with the Braintree Gateway.Business Framework: A framework which helps building business applications. It provides business rules, validation rules and a text-based language for writing rules. I...Camp Araminta: This project will be used to coordinate development efforts on the Camp Araminta website.ChoServiceHost: Simple and easy way to create and host Windows Service Applications in .NET 3.5/Visual Studio 2008Delta College Game Development Project: Project site for cs 16 game development classDotNetNuke® Labs: DotNetNuke Labs is a collection of "research & development" type projects for the DotNetNuke platform.Generic web part for hosting Silverlight content on SharePoint sites (WSS,MOSS): This is a generic web part for hosting Silverlight content on WSS 30 and MOSS 2007 sites. The objective of this web part was to make it easy for us...GpTiming: GpTiming is a simple "lab" application related to race events, based on a Domain Model.HTML Forms in Windows Forms: As the names suggests this code library is designed to introduce HTML code (primarily form code) into Windows Forms. It was created because standar...imgur uploader - .net open source uploader for image sharing site imgur: Imgur uploader strives to be an easy to use uploader for images you would like to share with friends and family. It is written in c#.kuuy static system: kuuy static system is a full static publish website system!LaTeX Grapher: The goal of this project is to make a tool that facilitates making high quality two dimensional vector graphic function plots with a minimal amount...LightREST: A .NET library to consume REST-based HTTP services.Machiavelli: Machiavelli is Stackoverflow inspired project that I am working on following Andrew Siemer's article on DotNetSlackers. Mover: Mover makes it easier for developers to create programmatic animations in Silverlight. It provides an expressive API to the platform's underlying S...MVC Presenter: ASP.NET MVC 2で作るプレゼンビューアーnHibernate Attribute mapping: How to use Attibute mapping with a ManyToMany Relationship with nHibernateNIPO Data Processing Component Framework: NIPO is a general purpose component framework for data processing applications (that follow the IPO-principle). Its plugin-based architecture makes...PowerShell Remote File Explorer: This project intends to develop a Windows forms based file explorer to browse/transfer files over PowerShell 2.0 remoting channel. The file transfe...Process Flow Tracking of Biomass Distribution Project (University of Mumbai): At Larsen & Toubro Infotech India Ltd., my team worked on a SCM (Supply Chain Management) based project titled 'Process Flow Tracking of Biomass Di...VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1Yicker: a microblog program devolep by c#.New ReleasesADO.Net DataSets to ExtJs.data.Store: Ext.net: This is the first version of Ext.net. This version contains a single class, Ext.net.Store which extends the Ext.data.Store class to consume ADO.Ne...AMP.Net Wrapper: AMP.Net v1.0: Provides abstraction for all the product search functionality offered by AMP.ArkSwitch: ArkSwitch legacy versions: Old versions - no need to download themArkSwitch: ArkSwitch v1.1.0: ArkSwitch v1.1.0Braintree Client Library: Braintree 1.0.0: Braintree .NET client library 1.0.0Business Framework: BusinessFramework preview: Early preview bits. See Rules for a sample.Business Framework: Samples: SamplesCC.Votd: CC.Votd 1.0.10.224: This is the initial release of CC.Votd. Marking as beta since I'm the only one who has used it up to this point.ChoServiceHost: ChoServiceHost.msi: Easy way to develop Windows Service applications in .NET 3.5/VS.NET 2008. (Installer)ChoServiceHost: ChoServiceHost-Src.zip: Easy way to develop Windows Service applications in .NET 3.5/VS.NET 2008. (Source Files)CHS Extranet: Beta 2.4: Beta 2.4 Release: Change Log: Added HTML preview options for XLS, XLSX, DOCX File Changes: ~/MyComputer.aspx ~/mycomputer.css ~/basestyle.css...Composure: AvalonDock-55751-VS2010.NET4: This is a "convenience build" of AvalonDock (drop 55751) for VIsual Studio 2010 and .NET 4.0. Nothing has been altered in the source code (which ...Data Access Component: Version 2.6: Add LINQ support.Desktop Google Reader: 1.3 Beta 1: New features: Read it Later included (see http://readitlaterlist.com/) Liking added (working: see number of liking users, see if liking yourself,...Explorer Plus: Explorer Plus v0.3: Amazon Locales AddedFree Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.3 Released: Hi, Today we have released the final version of Visifire v3.0.3 which contains the following major features: * DataBinding. * IndicatorEn...Generic web part for hosting Silverlight content on SharePoint sites (WSS,MOSS): CTP: The objective of this release was to gather feedback from the wider community. I intend to pursue further development and make fixes wherever appro...HTML Forms in Windows Forms: HTMLForms 1.0: First Release.imgur uploader - .net open source uploader for image sharing site imgur: Release 2010-02-23-01: This is the first codeplex release! Let mayhem commence...Jeremi Stadler: Stick Tops 2.5: Sticktops is a very light program that makes it easy to paste stuff on small notes on the screen. All notes you have is saved on a server so you ca...kuuy static system: kss_v1.0beta sql: kss_v1.0beta sql scripts sourceMDownloader: MDownloader-0.15.2.55998: Fixed detecting uploading.com dead links; Added hiding rss entries without files;Mover: MoverLib for Silverlight 3: A first version of MoverLib for Silverlight 3.nHibernate Attribute mapping: 1.0: Source CodenHibernate Attribute mapping: Download 1: Zip fileNodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.113: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.113: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version inclu...OAuthLib: OAuthLib (1.6.0.0): Difference between previous version is as next. 7079 Make it possible to pass factory method of request in ObtainUnauthorizedRequestToken and Reque...patterns & practices SharePoint Guidance: SPG2010 Drop 5: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...PowerShell Remote File Explorer: PSRemoteExplorer 0.1: This release is the initial release of PowerShell remote file explorer. This enables the basic functionality of a remote file explorer. This also p...Reusable Library: v1.0.3: A collection of reusable abstractions for enterprise application developer.SharePoint Outlook Connector: Version 1.0.2.4: Version 1.0.2.4 Minor bugs have been fixed.Silverlight Server File Manager: First production release: This release is in production. Release on change set 37268.SIMD Detector: 2nd Release: Released C/CLI assembly project for use in CSharp and VB. Tested in CSharp console application. A Windows Form application coming soon. Projects ma...Source Analysis Policy: Source Analysis Policy v1.1 SP1: This release contains the compiled, and signed binaries in an installation package. This package also registers the policy with Microsoft Visual St...SpecExpress : A Fluent Validation Framework: SpecExpress 1.1: UpdatesAdded Validation Contexts feature Fixed bug with handling for Bool Types and Required MessageStore now allows for overriding individual ...VCC: Latest build, v2.1.30223.0: Automatic drop of latest buildVS2010 Rc1 Fix: RC1Fix01: This is a very simple project implementing a Microsoft Walkthrough at http://msdn.microsoft.com/en-us/library/wdb4eb30%28VS.100%29.aspx and the man...WPF AutoComplete TextBox Control: version 1.0: Initial releaseMost Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkAccelerators for Microsoft Dynamics CRMWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETInfoServiceNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2SharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryXcoordination Application Space

    Read the article

  • Parallelism in .NET – Part 7, Some Differences between PLINQ and LINQ to Objects

    - by Reed
    In my previous post on Declarative Data Parallelism, I mentioned that PLINQ extends LINQ to Objects to support parallel operations.  Although nearly all of the same operations are supported, there are some differences between PLINQ and LINQ to Objects.  By introducing Parallelism to our declarative model, we add some extra complexity.  This, in turn, adds some extra requirements that must be addressed. In order to illustrate the main differences, and why they exist, let’s begin by discussing some differences in how the two technologies operate, and look at the underlying types involved in LINQ to Objects and PLINQ . LINQ to Objects is mainly built upon a single class: Enumerable.  The Enumerable class is a static class that defines a large set of extension methods, nearly all of which work upon an IEnumerable<T>.  Many of these methods return a new IEnumerable<T>, allowing the methods to be chained together into a fluent style interface.  This is what allows us to write statements that chain together, and lead to the nice declarative programming model of LINQ: double min = collection .Where(item => item.SomeProperty > 6 && item.SomeProperty < 24) .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Other LINQ variants work in a similar fashion.  For example, most data-oriented LINQ providers are built upon an implementation of IQueryable<T>, which allows the database provider to turn a LINQ statement into an underlying SQL query, to be performed directly on the remote database. PLINQ is similar, but instead of being built upon the Enumerable class, most of PLINQ is built upon a new static class: ParallelEnumerable.  When using PLINQ, you typically begin with any collection which implements IEnumerable<T>, and convert it to a new type using an extension method defined on ParallelEnumerable: AsParallel().  This method takes any IEnumerable<T>, and converts it into a ParallelQuery<T>, the core class for PLINQ.  There is a similar ParallelQuery class for working with non-generic IEnumerable implementations. This brings us to our first subtle, but important difference between PLINQ and LINQ – PLINQ always works upon specific types, which must be explicitly created. Typically, the type you’ll use with PLINQ is ParallelQuery<T>, but it can sometimes be a ParallelQuery or an OrderedParallelQuery<T>.  Instead of dealing with an interface, implemented by an unknown class, we’re dealing with a specific class type.  This works seamlessly from a usage standpoint – ParallelQuery<T> implements IEnumerable<T>, so you can always “switch back” to an IEnumerable<T>.  The difference only arises at the beginning of our parallelization.  When we’re using LINQ, and we want to process a normal collection via PLINQ, we need to explicitly convert the collection into a ParallelQuery<T> by calling AsParallel().  There is an important consideration here – AsParallel() does not need to be called on your specific collection, but rather any IEnumerable<T>.  This allows you to place it anywhere in the chain of methods involved in a LINQ statement, not just at the beginning.  This can be useful if you have an operation which will not parallelize well or is not thread safe.  For example, the following is perfectly valid, and similar to our previous examples: double min = collection .AsParallel() .Select(item => item.SomeOperation()) .Where(item => item.SomeProperty > 6 && item.SomeProperty < 24) .Min(item => item.PerformComputation()); However, if SomeOperation() is not thread safe, we could just as easily do: double min = collection .Select(item => item.SomeOperation()) .AsParallel() .Where(item => item.SomeProperty > 6 && item.SomeProperty < 24) .Min(item => item.PerformComputation()); In this case, we’re using standard LINQ to Objects for the Select(…) method, then converting the results of that map routine to a ParallelQuery<T>, and processing our filter (the Where method) and our aggregation (the Min method) in parallel. PLINQ also provides us with a way to convert a ParallelQuery<T> back into a standard IEnumerable<T>, forcing sequential processing via standard LINQ to Objects.  If SomeOperation() was thread-safe, but PerformComputation() was not thread-safe, we would need to handle this by using the AsEnumerable() method: double min = collection .AsParallel() .Select(item => item.SomeOperation()) .Where(item => item.SomeProperty > 6 && item.SomeProperty < 24) .AsEnumerable() .Min(item => item.PerformComputation()); Here, we’re converting our collection into a ParallelQuery<T>, doing our map operation (the Select(…) method) and our filtering in parallel, then converting the collection back into a standard IEnumerable<T>, which causes our aggregation via Min() to be performed sequentially. This could also be written as two statements, as well, which would allow us to use the language integrated syntax for the first portion: var tempCollection = from item in collection.AsParallel() let e = item.SomeOperation() where (e.SomeProperty > 6 && e.SomeProperty < 24) select e; double min = tempCollection.AsEnumerable().Min(item => item.PerformComputation()); This allows us to use the standard LINQ style language integrated query syntax, but control whether it’s performed in parallel or serial by adding AsParallel() and AsEnumerable() appropriately. The second important difference between PLINQ and LINQ deals with order preservation.  PLINQ, by default, does not preserve the order of of source collection. This is by design.  In order to process a collection in parallel, the system needs to naturally deal with multiple elements at the same time.  Maintaining the original ordering of the sequence adds overhead, which is, in many cases, unnecessary.  Therefore, by default, the system is allowed to completely change the order of your sequence during processing.  If you are doing a standard query operation, this is usually not an issue.  However, there are times when keeping a specific ordering in place is important.  If this is required, you can explicitly request the ordering be preserved throughout all operations done on a ParallelQuery<T> by using the AsOrdered() extension method.  This will cause our sequence ordering to be preserved. For example, suppose we wanted to take a collection, perform an expensive operation which converts it to a new type, and display the first 100 elements.  In LINQ to Objects, our code might look something like: // Using IEnumerable<SourceClass> collection IEnumerable<ResultClass> results = collection .Select(e => e.CreateResult()) .Take(100); If we just converted this to a parallel query naively, like so: IEnumerable<ResultClass> results = collection .AsParallel() .Select(e => e.CreateResult()) .Take(100); We could very easily get a very different, and non-reproducable, set of results, since the ordering of elements in the input collection is not preserved.  To get the same results as our original query, we need to use: IEnumerable<ResultClass> results = collection .AsParallel() .AsOrdered() .Select(e => e.CreateResult()) .Take(100); This requests that PLINQ process our sequence in a way that verifies that our resulting collection is ordered as if it were processed serially.  This will cause our query to run slower, since there is overhead involved in maintaining the ordering.  However, in this case, it is required, since the ordering is required for correctness. PLINQ is incredibly useful.  It allows us to easily take nearly any LINQ to Objects query and run it in parallel, using the same methods and syntax we’ve used previously.  There are some important differences in operation that must be considered, however – it is not a free pass to parallelize everything.  When using PLINQ in order to parallelize your routines declaratively, the same guideline I mentioned before still applies: Parallelization is something that should be handled with care and forethought, added by design, and not just introduced casually.

    Read the article

  • jQuery Templates and Data Linking (and Microsoft contributing to jQuery)

    - by ScottGu
    The jQuery library has a passionate community of developers, and it is now the most widely used JavaScript library on the web today. Two years ago I announced that Microsoft would begin offering product support for jQuery, and that we’d be including it in new versions of Visual Studio going forward. By default, when you create new ASP.NET Web Forms and ASP.NET MVC projects with VS 2010 you’ll find jQuery automatically added to your project. A few weeks ago during my second keynote at the MIX 2010 conference I announced that Microsoft would also begin contributing to the jQuery project.  During the talk, John Resig -- the creator of the jQuery library and leader of the jQuery developer team – talked a little about our participation and discussed an early prototype of a new client templating API for jQuery. In this blog post, I’m going to talk a little about how my team is starting to contribute to the jQuery project, and discuss some of the specific features that we are working on such as client-side templating and data linking (data-binding). Contributing to jQuery jQuery has a fantastic developer community, and a very open way to propose suggestions and make contributions.  Microsoft is following the same process to contribute to jQuery as any other member of the community. As an example, when working with the jQuery community to improve support for templating to jQuery my team followed the following steps: We created a proposal for templating and posted the proposal to the jQuery developer forum (http://forum.jquery.com/topic/jquery-templates-proposal and http://forum.jquery.com/topic/templating-syntax ). After receiving feedback on the forums, the jQuery team created a prototype for templating and posted the prototype at the Github code repository (http://github.com/jquery/jquery-tmpl ). We iterated on the prototype, creating a new fork on Github of the templating prototype, to suggest design improvements. Several other members of the community also provided design feedback by forking the templating code. There has been an amazing amount of participation by the jQuery community in response to the original templating proposal (over 100 posts in the jQuery forum), and the design of the templating proposal has evolved significantly based on community feedback. The jQuery team is the ultimate determiner on what happens with the templating proposal – they might include it in jQuery core, or make it an official plugin, or reject it entirely.  My team is excited to be able to participate in the open source process, and make suggestions and contributions the same way as any other member of the community. jQuery Template Support Client-side templates enable jQuery developers to easily generate and render HTML UI on the client.  Templates support a simple syntax that enables either developers or designers to declaratively specify the HTML they want to generate.  Developers can then programmatically invoke the templates on the client, and pass JavaScript objects to them to make the content rendered completely data driven.  These JavaScript objects can optionally be based on data retrieved from a server. Because the jQuery templating proposal is still evolving in response to community feedback, the final version might look very different than the version below. This blog post gives you a sense of how you can try out and use templating as it exists today (you can download the prototype by the jQuery core team at http://github.com/jquery/jquery-tmpl or the latest submission from my team at http://github.com/nje/jquery-tmpl).  jQuery Client Templates You create client-side jQuery templates by embedding content within a <script type="text/html"> tag.  For example, the HTML below contains a <div> template container, as well as a client-side jQuery “contactTemplate” template (within the <script type="text/html"> element) that can be used to dynamically display a list of contacts: The {{= name }} and {{= phone }} expressions are used within the contact template above to display the names and phone numbers of “contact” objects passed to the template. We can use the template to display either an array of JavaScript objects or a single object. The JavaScript code below demonstrates how you can render a JavaScript array of “contact” object using the above template. The render() method renders the data into a string and appends the string to the “contactContainer” DIV element: When the page is loaded, the list of contacts is rendered by the template.  All of this template rendering is happening on the client-side within the browser:   Templating Commands and Conditional Display Logic The current templating proposal supports a small set of template commands - including if, else, and each statements. The number of template commands was deliberately kept small to encourage people to place more complicated logic outside of their templates. Even this small set of template commands is very useful though. Imagine, for example, that each contact can have zero or more phone numbers. The contacts could be represented by the JavaScript array below: The template below demonstrates how you can use the if and each template commands to conditionally display and loop the phone numbers for each contact: If a contact has one or more phone numbers then each of the phone numbers is displayed by iterating through the phone numbers with the each template command: The jQuery team designed the template commands so that they are extensible. If you have a need for a new template command then you can easily add new template commands to the default set of commands. Support for Client Data-Linking The ASP.NET team recently submitted another proposal and prototype to the jQuery forums (http://forum.jquery.com/topic/proposal-for-adding-data-linking-to-jquery). This proposal describes a new feature named data linking. Data Linking enables you to link a property of one object to a property of another object - so that when one property changes the other property changes.  Data linking enables you to easily keep your UI and data objects synchronized within a page. If you are familiar with the concept of data-binding then you will be familiar with data linking (in the proposal, we call the feature data linking because jQuery already includes a bind() method that has nothing to do with data-binding). Imagine, for example, that you have a page with the following HTML <input> elements: The following JavaScript code links the two INPUT elements above to the properties of a JavaScript “contact” object that has a “name” and “phone” property: When you execute this code, the value of the first INPUT element (#name) is set to the value of the contact name property, and the value of the second INPUT element (#phone) is set to the value of the contact phone property. The properties of the contact object and the properties of the INPUT elements are also linked – so that changes to one are also reflected in the other. Because the contact object is linked to the INPUT element, when you request the page, the values of the contact properties are displayed: More interesting, the values of the linked INPUT elements will change automatically whenever you update the properties of the contact object they are linked to. For example, we could programmatically modify the properties of the “contact” object using the jQuery attr() method like below: Because our two INPUT elements are linked to the “contact” object, the INPUT element values will be updated automatically (without us having to write any code to modify the UI elements): Note that we updated the contact object above using the jQuery attr() method. In order for data linking to work, you must use jQuery methods to modify the property values. Two Way Linking The linkBoth() method enables two-way data linking. The contact object and INPUT elements are linked in both directions. When you modify the value of the INPUT element, the contact object is also updated automatically. For example, the following code adds a client-side JavaScript click handler to an HTML button element. When you click the button, the property values of the contact object are displayed using an alert() dialog: The following demonstrates what happens when you change the value of the Name INPUT element and click the Save button. Notice that the name property of the “contact” object that the INPUT element was linked to was updated automatically: The above example is obviously trivially simple.  Instead of displaying the new values of the contact object with a JavaScript alert, you can imagine instead calling a web-service to save the object to a database. The benefit of data linking is that it enables you to focus on your data and frees you from the mechanics of keeping your UI and data in sync. Converters The current data linking proposal also supports a feature called converters. A converter enables you to easily convert the value of a property during data linking. For example, imagine that you want to represent phone numbers in a standard way with the “contact” object phone property. In particular, you don’t want to include special characters such as ()- in the phone number - instead you only want digits and nothing else. In that case, you can wire-up a converter to convert the value of an INPUT element into this format using the code below: Notice above how a converter function is being passed to the linkFrom() method used to link the phone property of the “contact” object with the value of the phone INPUT element. This convertor function strips any non-numeric characters from the INPUT element before updating the phone property.  Now, if you enter the phone number (206) 555-9999 into the phone input field then the value 2065559999 is assigned to the phone property of the contact object: You can also use a converter in the opposite direction also. For example, you can apply a standard phone format string when displaying a phone number from a phone property. Combining Templating and Data Linking Our goal in submitting these two proposals for templating and data linking is to make it easier to work with data when building websites and applications with jQuery. Templating makes it easier to display a list of database records retrieved from a database through an Ajax call. Data linking makes it easier to keep the data and user interface in sync for update scenarios. Currently, we are working on an extension of the data linking proposal to support declarative data linking. We want to make it easy to take advantage of data linking when using a template to display data. For example, imagine that you are using the following template to display an array of product objects: Notice the {{link name}} and {{link price}} expressions. These expressions enable declarative data linking between the SPAN elements and properties of the product objects. The current jQuery templating prototype supports extending its syntax with custom template commands. In this case, we are extending the default templating syntax with a custom template command named “link”. The benefit of using data linking with the above template is that the SPAN elements will be automatically updated whenever the underlying “product” data is updated.  Declarative data linking also makes it easier to create edit and insert forms. For example, you could create a form for editing a product by using declarative data linking like this: Whenever you change the value of the INPUT elements in a template that uses declarative data linking, the underlying JavaScript data object is automatically updated. Instead of needing to write code to scrape the HTML form to get updated values, you can instead work with the underlying data directly – making your client-side code much cleaner and simpler. Downloading Working Code Examples of the Above Scenarios You can download this .zip file to get with working code examples of the above scenarios.  The .zip file includes 4 static HTML page: Listing1_Templating.htm – Illustrates basic templating. Listing2_TemplatingConditionals.htm – Illustrates templating with the use of the if and each template commands. Listing3_DataLinking.htm – Illustrates data linking. Listing4_Converters.htm – Illustrates using a converter with data linking. You can un-zip the file to the file-system and then run each page to see the concepts in action. Summary We are excited to be able to begin participating within the open-source jQuery project.  We’ve received lots of encouraging feedback in response to our first two proposals, and we will continue to actively contribute going forward.  These features will hopefully make it easier for all developers (including ASP.NET developers) to build great Ajax applications. Hope this helps, Scott P.S. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu]

    Read the article

  • Mauritius Software Craftsmanship Community

    There we go! I finally managed to push myself forward and pick up an old, actually too old, idea since I ever arrived here in Mauritius more than six years ago. I'm talking about a community for all kind of ICT connected people. In the past (back in Germany), I used to be involved in various community activities. For example, I was part of the Microsoft Community Leader/Influencer Program (CLIP) in Germany due to an FAQ on Visual FoxPro, actually Active FoxPro Pages (AFP) to be more precise. Then in 2003/2004 I addressed the responsible person of the dFPUG user group in Speyer in order to assist him in organising monthly user group meetings. Well, he handed over management completely, and attended our meetings regularly. Why did it take you so long? Well, I don't want to bother you with the details but short version is that I was too busy on either job (building up new companies) or private life (got married and we have two lovely children, eh 'monsters') or even both. But now is the time where I was starting to look for new fields given the fact that I gained some spare time. My businesses are up and running, the kids are in school, and I am finally in a position where I can commit myself again to community activities. And I love to do that! Why a new user group? Good question... And 'easy' to answer. Since back in 2007 I did my usual research, eh Google searches, to see whether there existing user groups in Mauritius and in which field of interest. And yes, there are! If I recall this correctly, then there are communities for PHP, Drupal, Python (just recently), Oracle, and Linux (which used to be even two). But... either they do not exist anymore, they are dormant, or there is only a low heart-beat, frankly speaking. And yes, I went to meetings of the Linux User Group Meta (Mauritius) back in 2010/2011 and just recently. I really like the setup and the way the LUGM is organised. It's just that I have a slightly different point of view on how a user group or community should organise itself and how to approach future members. Don't get me wrong, I'm not criticizing others doing a very good job, I'm only saying that I'd like to do it differently. The last meeting of the LUGM was awesome; read my feedback about it. Ok, so what's up with 'Mauritius Software Craftsmanship Community' or short: MSCC? As I've already written in my article on 'Communities - The importance of exchange and discussion' I think it is essential in a world of IT to stay 'connected' with a good number of other people in the same field. There is so much dynamic and every day's news that it is almost impossible to keep on track with all of them. The MSCC is going to provide a common platform to exchange experience and share knowledge between each other. You might be a newbie and want to know what to expect working as a software developer, or as a database administrator, or maybe as an IT systems administrator, or you're an experienced geek that loves to share your ideas or solutions that you implemented to solve a specific problem, or you're the business (or HR) guy that is looking for 'fresh' blood to enforce your existing team. Or... you're just interested and you'd like to communicate with like-minded people. Meetup of 26.06.2013 @ L'arabica: Of course there are laptops around. Free WiFi, power outlet, coffee, code and Linux in one go. The MSCC is technology-agnostic and spans an umbrella over any kind of technology. Simply because you can't ignore other technologies anymore in a connected IT world as we have. A front-end developer for iOS applications should have the chance to connect with a Python back-end coder and eventually with a DBA for MySQL or PostgreSQL and exchange their experience. Furthermore, I'm a huge fan of cross-platform development, and it is very pleasant to have pure Web developers - with all that HTML5, CSS3, JavaScript and JS libraries stuff - and passionate C# or Java coders at the same table. This diversity of knowledge can assist and boost your personal situation. And last but not least, there are projects and open positions 'flying' around... People might like to hear others opinion about an employer or get new impulses on how to tackle down an issue at their workspace, etc. This is about community. And that's how I see the MSCC in general - free of any limitations be it by programming language or technology. Having the chance to exchange experience and to discuss certain aspects of technology saves you time and money, and it's a pleasure to enjoy. Compared to dusty books and remote online resources. It's human! Organising meetups (meetings, get-together, gatherings - you name it!) As of writing this article, the MSCC is currently meeting every Wednesday for the weekly 'Code & Coffee' session at various locations (suggestions are welcome!) in Mauritius. This might change in the future eventually but especially at the beginning I think it is very important to create awareness in the Mauritian IT world. Yes, we are here! Come and join us! ;-) The MSCC's main online presence is located at Meetup.com because it allows me to handle the organisation of events and meeting appointments very easily, and any member can have a look who else is involved so that an exchange of contacts is given at any time. In combination with the other entities (G+ Communities, FB Pages or in Groups) I advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there is a Trello workspace to collect and share ideas and provide downloads of slides, etc. Trello is also available as free smartphone app. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians! Recent updates The MSCC is now officially participating in the O'Reilly UK User Group programm and we are allowed to request review or recension copies of recent titles. Additionally, we have a discount code for any books or ebooks that you might like to order on shop.oreilly.com. More applications for user group sponsorship programms are pending and I'm looking forward to a couple of announcement very soon. And... we need some kind of 'corporate identity' - Over at the MSCC website there is a call for action (or better said a contest with prizes) to create a unique design for the MSCC. This would include a decent colour palette, a logo, graphical banners for Meetup, Google+, Facebook, LinkedIn, etc. and of course badges for our craftsmen to add to their personal blogs and websites. Please spread the word and contribute. Thanks!

    Read the article

  • Parallelism in .NET – Part 6, Declarative Data Parallelism

    - by Reed
    When working with a problem that can be decomposed by data, we have a collection, and some operation being performed upon the collection.  I’ve demonstrated how this can be parallelized using the Task Parallel Library and imperative programming using imperative data parallelism via the Parallel class.  While this provides a huge step forward in terms of power and capabilities, in many cases, special care must still be given for relative common scenarios. C# 3.0 and Visual Basic 9.0 introduced a new, declarative programming model to .NET via the LINQ Project.  When working with collections, we can now write software that describes what we want to occur without having to explicitly state how the program should accomplish the task.  By taking advantage of LINQ, many operations become much shorter, more elegant, and easier to understand and maintain.  Version 4.0 of the .NET framework extends this concept into the parallel computation space by introducing Parallel LINQ. Before we delve into PLINQ, let’s begin with a short discussion of LINQ.  LINQ, the extensions to the .NET Framework which implement language integrated query, set, and transform operations, is implemented in many flavors.  For our purposes, we are interested in LINQ to Objects.  When dealing with parallelizing a routine, we typically are dealing with in-memory data storage.  More data-access oriented LINQ variants, such as LINQ to SQL and LINQ to Entities in the Entity Framework fall outside of our concern, since the parallelism there is the concern of the data base engine processing the query itself. LINQ (LINQ to Objects in particular) works by implementing a series of extension methods, most of which work on IEnumerable<T>.  The language enhancements use these extension methods to create a very concise, readable alternative to using traditional foreach statement.  For example, let’s revisit our minimum aggregation routine we wrote in Part 4: double min = double.MaxValue; foreach(var item in collection) { double value = item.PerformComputation(); min = System.Math.Min(min, value); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, we’re doing a very simple computation, but writing this in an imperative style.  This can be loosely translated to English as: Create a very large number, and save it in min Loop through each item in the collection. For every item: Perform some computation, and save the result If the computation is less than min, set min to the computation Although this is fairly easy to follow, it’s quite a few lines of code, and it requires us to read through the code, step by step, line by line, in order to understand the intention of the developer. We can rework this same statement, using LINQ: double min = collection.Min(item => item.PerformComputation()); Here, we’re after the same information.  However, this is written using a declarative programming style.  When we see this code, we’d naturally translate this to English as: Save the Min value of collection, determined via calling item.PerformComputation() That’s it – instead of multiple logical steps, we have one single, declarative request.  This makes the developer’s intentions very clear, and very easy to follow.  The system is free to implement this using whatever method required. Parallel LINQ (PLINQ) extends LINQ to Objects to support parallel operations.  This is a perfect fit in many cases when you have a problem that can be decomposed by data.  To show this, let’s again refer to our minimum aggregation routine from Part 4, but this time, let’s review our final, parallelized version: // Safe, and fast! double min = double.MaxValue; // Make a "lock" object object syncObject = new object(); Parallel.ForEach( collection, // First, we provide a local state initialization delegate. () => double.MaxValue, // Next, we supply the body, which takes the original item, loop state, // and local state, and returns a new local state (item, loopState, localState) => { double value = item.PerformComputation(); return System.Math.Min(localState, value); }, // Finally, we provide an Action<TLocal>, to "merge" results together localState => { // This requires locking, but it's only once per used thread lock(syncObj) min = System.Math.Min(min, localState); } ); Here, we’re doing the same computation as above, but fully parallelized.  Describing this in English becomes quite a feat: Create a very large number, and save it in min Create a temporary object we can use for locking Call Parallel.ForEach, specifying three delegates For the first delegate: Initialize a local variable to hold the local state to a very large number For the second delegate: For each item in the collection, perform some computation, save the result If the result is less than our local state, save the result in local state For the final delegate: Take a lock on our temporary object to protect our min variable Save the min of our min and local state variables Although this solves our problem, and does it in a very efficient way, we’ve created a set of code that is quite a bit more difficult to understand and maintain. PLINQ provides us with a very nice alternative.  In order to use PLINQ, we need to learn one new extension method that works on IEnumerable<T> – ParallelEnumerable.AsParallel(). That’s all we need to learn in order to use PLINQ: one single method.  We can write our minimum aggregation in PLINQ very simply: double min = collection.AsParallel().Min(item => item.PerformComputation()); By simply adding “.AsParallel()” to our LINQ to Objects query, we converted this to using PLINQ and running this computation in parallel!  This can be loosely translated into English easily, as well: Process the collection in parallel Get the Minimum value, determined by calling PerformComputation on each item Here, our intention is very clear and easy to understand.  We just want to perform the same operation we did in serial, but run it “as parallel”.  PLINQ completely extends LINQ to Objects: the entire functionality of LINQ to Objects is available.  By simply adding a call to AsParallel(), we can specify that a collection should be processed in parallel.  This is simple, safe, and incredibly useful.

    Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >